• Not in stock - on order
    Ballistol weapons cleaning bag 44 parts An extremely sturdy bag that contains everything you need for quick and thorough weapon care in a small space. This is Ballistol's weapons cleaning kit. The weapons cleaning kit includes:
    • A five-piece robust polish from about 18 to 90 cm in length wiper with accessories for .22 caliber (rifles) up to 12 (shotguns).
    • 50 ml Ballistol Spray for more than 1000 purposes.
    • 30 ml Guncer ceramic pistol oil for professional lubrication of all weapon parts.
    • 30 ml Robla Solo Mil vatreiniger - the multiple Test winner.
    • A throwaway cloth from Ballistol.
    • A disposable cloth for insect protection.
    • A disposable cloth for animal care in oil.
    • A Neo Ballistol disposable cloth for home remedies.
    • Ballistol cleaning felt six of each caliber .22, 7.5 mm and 9.3 mm.
    • A Ballistol gun cleaning cloth.
    • A cleaning felt holder for the cleaning stick.
    • An elongated mirror with gives you visibility in the barrel and pattern chamber.
    • A double-sided cleaning brush with firm nylon bristles.
    • A very robust outer bag with zipper and many pockets and belt loops.
    The polishing stick The Ballistol polisher consists of five metal elements. The first element is equipped with a collapsible handle and has a swipe length of approximately 18 cm. You can attach up to four of the included extension elements to this base element in a row, gradually extending a swipe length to about 90 cm + felt holder. Therefore, the Ballistol polisher is equally suitable for small arms, rifles and shotguns. Each element is equipped with an anti-slip zone, making it easy to fasten and loosen, even with greasy fingers. With this brushing stick, use other felt holders or brushes If you use standard 1/8 inch polish fasteners, such as brush brushes, wool wipers and bronze steel brushes from AKAH or other manufacturers, you will find the right adapter for 1/8 inch thread. With this adapter you can also use the large Ballistol felt holder for up to three felts. The outer bag The weapon cleaning bag is equipped with a robust zipper that can be opened or closed from both sides. Two thick cords as drawstrings. The bag is equipped with 3 pockets and 11 attachment loops for attaching cleaning equipment. The bag is generously dimensioned, so you can place other weapon maintenance tools in addition to the delivery size, such as a precision oil pen or weapons cleaning instruments and much more.
  • Silicone oil is great for lubricating metal, rubber, plastic, wood and leather. Silicone has the pleasant feature that it is "dry", and therefore does not drip or drip. Silicone attaches strongly to all surfaces and provide protection for extended periods. Silicone is ideal for lubricating constructions in which a mixture of materials are used, such as metal and rubber and/or plastic. The oil reduces friction and dampens noise. Beeps and creaks disappear like snow in the sun. A layer of oil protects surfaces from -50 C to +200 C and therefore has a wide scope both at home and in the industry. Free of environmentally toxic substances and chlorinated hydrocarbons. Contains biodegradable solvents and ozone neutral propellant. Typical applications: Plastic gears, plastic gears, rubber bearings, cables, guardrails, rubber strips, window seals, conductors, rollers, slides Application: For use, shake properly. Spray on clean surfaces. Spray evenly at a distance of 25 - 30 cm. Wipe away excess product. Repeat the application if necessary.
  • Ballistol maintenance oil can rightly be called a panacea. Already in 1904, the formula for Ballistol was developed. This maintenance oil with pine scent was originally intended as weapon oil. Not long after the introduction, the lubricating, cleansing and protective effect of Ballistol was noticed. Since then millions of people trust daily in numerous activities on the products of this Bavarian company. Ballistol is food safe and can be used for hundreds of purposes. It does not dry out and clotting not. Ballistol is biodegradable and skin friendly. It creeps between hinged parts as a creep oil. Making common hinges or bolts is a piece of cake for Ballistol. Some other relevant applications are:
    • Lubricating Pocket Knives Multi tools
    • Protecting metal against rust
    • Leather smooth and unfastened, also protects against insects and fungus
    • The cleaning of firearms
    • Oils (dehydrated) wood, think of handles
    • Lubricating hinges and other moving (metallic) parts
  • The VarioFlex system from Ballistol is the ultimate solution for hard-to-reach corners and cracks. Virtually every angle can be treated thanks to the flexible and dynamic spray head. Choose from two positions, with a base sprayer or a hose to bend into shape. With the VarioFlex from Ballistol you always have the right tool in your hands. With us you get more oil AND a competitive price! What Ballistol oil is used for:
    • Lubricating Pocket Knives Multi tools
    • Protecting metal against rust
    • Leather smooth and unfastened, also protects against insects and fungus
    • The cleaning of firearms
    • Oils (dehydrated) wood, think of handles
    • Lubricating hinges and other moving (metallic) parts
    This spray can is delivered with a straw that allows you to spray in a more targeted manner.
  • Whether for handicrafts, home or hobby, for care, protection, cleaning or lubrication, at home, at work or on the go - Ballistol Universal Oil is the right oil for 1,000 cases and more. It is used as a rust protection, lubricating oil, care and cleaning agent and has excelled for more than 115 years with many excellent properties. BALLISTOL UNIVERSAL OIL:
    • extremely creeping,
    • sliding actively,
    • does not wax,
    • fully biodegradable,
    • food safe,
    • skin-friendly,
    • completely harmless,
    • environmentally friendly
    • has a disinfecting effect.
    Ballistol Universal Oil was developed in 1904 and has been produced in Germany since then according to an unchanged recipe. All active ingredients in Ballistol Universal Oil are particularly pure, of organic origin and completely degradable. The base oil for Ballistol Universal Oil is medicinally pure, free of chlorinated hydrocarbons and contains no substances of animal origin. In addition, Ballistol Universal Oil is silicone, PTFE, acid and resin-free and harmless within the meaning of Articles 30, 31 of the Food, Consumer Goods and Feed Act (LFGB) and Regulation (EC) No 1935/2004. Ballistol Universal Oil is therefore suitable for the care and maintenance of machines and appliances used in the food and beverage industry that may come into contact with the product. Ballistol Universal Oil cleans, maintains, protects, preserves and dissolves rust and residues such as resins of unsuitable oils and is applicable to wood, leather, stainless steel, iron, non-ferrous metals and oil-resistant rubber. As a universal oil, it can be used in an incredibly versatile way - in professional and hobby workshops, for industry and trade, cars and motorcycles, household and garden, for fishing, sports and for leather and weapon care. There are thousands of practical applications for Ballistol Universal Oil and new ones are always discovered. You can also take advantage of the advantages of the original Ballistol universal oil. Attributes
    • Material compatibility: rubber (oil resistant), wood, leather, metal/iron
    • Cleaning: Removing unsuitable fats, removing unsuitable oils, removing gum-like oils/resin, descaling/cleaning connections/contact agents on poles, plug connections, tombac/copper, unwanted patina on copper, brass, stainless steel and aluminum is removed, infiltrated, dissolves rust
    • Protect: preserved, corrosion protection / rust protection, neutralizes light acids such as hand perspiration
    • Lubrication: creep oil, lubricating oil, cutting oil / drilling oil
  • Not in stock - on order
    Thanks to this Motor Starter Aid Spray, a cold start of all internal combustion engines is possible when cold, humidity or rusted spark plugs make the start more difficult. The StartHulp can be used in all seasons. The Starter Aid Spray is ideal for car, motorcycle, moped, boat, tractor, lawnmower, lawnmower, snow ploughs, emergency power generators etc. Starter wonder is very suitable for 2-stroke and 4-stroke engines. Starter miracle can be used in diesel, petrol, gas and shaky engines and in biodiesel.

    Start wonder 200ml properties:

    • A fast start for all engines in all seasons
    • Offers a fast start with damp and cold engines
    • Start aid for engines that have been stationary for a long time and with rusted spark plugs
    • Suitable for car, motorcycle, moped, boat, tractor, lawnmower and emergency power generator
    • Suitable for 2-stroke and 4-stroke engines
    • For all internal combustion engines such as diesel, petrol, biodiesel, gas and shaky engine

    use:

    Stick Starter Aid Spray on the air filter for approx. 2 seconds or spray directly into the intake manifold. With petrol engines, give a little gas during start-up. Diesel engines are started full of gas without pre-annealing.
  • Not in stock - on order
    The finest Teflon ™ /PTFE particles sprayed on to it:
    • clean dry lubrication without attaching dirt and greasy hands,
    • effective reduction of static, sliding and rolling friction.
    • Ideal for rollers, bearings, slides, guide rails, telescopic conductors and much more. Suitable for all metal and plastic parts!
    BALLISTOL Teflon ™ Spray is silicone, acid and resin-free and does not harden. The hygienic dry lubrication/ solid lubrication. Constant and permanent lubrication and sliding without oil or grease. Therefore, no dirt or dust attach to the treated surface. There is also no disturbing lubricant sludge. Hygienic, clean and environmentally friendly. The PTFE particles in the submicron range attach even on supposedly very smooth surfaces and give the material an effective glide activity. Successfully tested and tested for all glide layers and for drastically reducing static and roller friction. Typical applications: To drastically reduce static, sliding and rolling friction in rollers and bearings, slides and guide rails, cable tractors and telescopic conductors, gears and gears. Application: shake well before use. Spray on the parts or smooth to be lubricated or surfaced at a distance of 10-25 cm and allow to dry for several minutes Is your PTFE layer sufficient? The static friction of PTFE is just as large as the sliding friction, so the transition from standstill to movement is shock-free. Teflon ™ is a trademark of The Chemours Company FC, LLC used under license by F.W. Klever GmbH
  • The finest Teflon ™ /PTFE particles sprayed on to it:
    • clean dry lubrication without attaching dirt and greasy hands,
    • effective reduction of static, sliding and rolling friction.
    • Ideal for rollers, bearings, slides, guide rails, telescopic conductors and much more. Suitable for all metal and plastic parts!
    BALLISTOL Teflon ™ Spray is silicone, acid and resin-free and does not harden. The hygienic dry lubrication/ solid lubrication. Constant and permanent lubrication and sliding without oil or grease. Therefore, no dirt or dust attach to the treated surface. There is also no disturbing lubricant sludge. Hygienic, clean and environmentally friendly. The PTFE particles in the submicron range attach even on supposedly very smooth surfaces and give the material an effective glide activity. Successfully tested and tested for all glide layers and for drastically reducing static and roller friction. Typical applications: To drastically reduce static, sliding and rolling friction in rollers and bearings, slides and guide rails, cable tractors and telescopic conductors, gears and gears. Application: shake well before use. Spray on the parts or smooth to be lubricated or surfaced at a distance of 10-25 cm and allow to dry for several minutes Is your PTFE layer sufficient? The static friction of PTFE is just as large as the sliding friction, so the transition from standstill to movement is shock-free. Teflon ™ is a trademark of The Chemours Company FC, LLC used under license by F.W. Klever GmbH
  • Not in stock - on order
    Whether for handicrafts, home or hobby, for care, protection, cleaning or lubrication, at home, at work or on the go - Ballistol Universal Oil is the right oil for 1,000 cases and more. It is used as a rust protection, lubricating oil, care and cleaning agent and has excelled for more than 115 years with many excellent properties. BALLISTOL UNIVERSAL OIL:
    • extremely creeping,
    • sliding actively,
    • does not wax,
    • fully biodegradable,
    • food safe,
    • skin-friendly,
    • completely harmless,
    • environmentally friendly
    • has a disinfecting effect.
    Ballistol Universal Oil was developed in 1904 and has been produced in Germany since then according to an unchanged recipe. All active ingredients in Ballistol Universal Oil are particularly pure, of organic origin and completely degradable. The base oil for Ballistol Universal Oil is medicinally pure, free of chlorinated hydrocarbons and contains no substances of animal origin. In addition, Ballistol Universal Oil is silicone, PTFE, acid and resin-free and harmless within the meaning of Articles 30, 31 of the Food, Consumer Goods and Feed Act (LFGB) and Regulation (EC) No 1935/2004. Ballistol Universal Oil is therefore suitable for the care and maintenance of machines and appliances used in the food and beverage industry that may come into contact with the product. Ballistol Universal Oil cleans, maintains, protects, preserves and dissolves rust and residues such as resins of unsuitable oils and is applicable to wood, leather, stainless steel, iron, non-ferrous metals and oil-resistant rubber. As a universal oil, it can be used in an incredibly versatile way - in professional and hobby workshops, for industry and trade, cars and motorcycles, household and garden, for fishing, sports and for leather and weapon care. There are thousands of practical applications for Ballistol Universal Oil and new ones are always discovered. You can also take advantage of the advantages of the original Ballistol universal oil. Attributes
    • Material compatibility: rubber (oil resistant), wood, leather, metal/iron
    • Cleaning: Removing unsuitable fats, removing unsuitable oils, removing gum-like oils/resin, descaling/cleaning connections/contact agents on poles, plug connections, tombac/copper, unwanted patina on copper, brass, stainless steel and aluminum is removed, infiltrated, dissolves rust
    • Protect: preserved, corrosion protection / rust protection, neutralizes light acids such as hand perspiration
    • Lubrication: creep oil, lubricating oil, cutting oil / drilling oil
  • Not in stock - on order
    Get all the necessary Ballistol products in your house to get your weapons, tools, etc... To provide the necessary maintenance! Content:
    • 200 ml universal Oil
    • 65 ml running cleaner Robla Solo MIL
    • 50 ml GunCer ceramic weapon oil
    • 50 ml Balsin shaft oil
    • 50 ml Ballistol cold devetter
    • 50 ml Ballistol Quick tanner
    • 2 goat hairbrush brush
    • 2 fluff-free wipes
    • 1 cleaning cloth.
    This article is no longer in stock. Be sure to check out our loose Ballistol products as well as Fluna Tec weapon maintenance sets.  
  • Belposcot Hunting Leather grease is the ideal product to make leather hunting articles water resistant, to feed and finally also to protect them. Because hunting equipment is highly subject to weather conditions it is of great importance to treat these sufficiently with belposcot's fat. The leather grease is perfect for your leather holsters, rifle box, boots, vests, ammunition belts, and so on. Additional application: The leather grease is perfectly suited to maintain the wooden stock of weapons. It will give it a smooth and polished effect, and at the same time make the water repellent. Water will bead from the flask and the flask will look like new.
  • Not in stock - on order
    Beretta soft sock for the rifle barrel. Cream color. Designed for top and bottom, side by side. Suitable for rifle walking up to 28"/ 71 cm
  • Not in stock - on order
    The Beretta Bore Cleaner removes copper, lead and plastic residues. Effective! Spray, leave on for 1-2 hours and clean. Size 125ml.
  • Basic cleaning kit for pistol. go 22/5.6 Cleaning The range of Beretta cleaning kits has been renovated to offer the user a wide choice of kits for the most complete cleaning at home or on the field. Taking care of and keeping your firearm clean is important to achieve good performance: it is only an advantage for better results during shooting, but it also guarantees increased safety and prevents problems due to the chemical residue in the vessels, if not removed in a short time. a full range of products for cleaning and taking care of your weapon. The range includes all the accessories and oils you need to get great performance out of your weapon, whether it's a shotgun, a rifle, or a gun. All our cleaning products are Made in Italy, developed in close collaboration with our experts to always get the most out of your weapon. Content:
    • Aluminum bar
    • 1 wool brush with Beretta Iconic color shoulder strap
    • 1 steel brush
    • 1 nylon brush
    • 1 bottle of "Factory Official CLP Gun Oil".
  • Not in stock - on order
    Basic cleaning kit for pistol. go 9 mm Cleaning The range of Beretta cleaning kits has been renovated to offer the user a wide choice of kits for the most complete cleaning at home or on the field. Taking care of and keeping your firearm clean is important to achieve good performance: it is only an advantage for better results during shooting, but it also guarantees increased safety and prevents problems due to the chemical residue in the vessels, if not removed in a short time. a full range of products for cleaning and taking care of your weapon. The range includes all the accessories and oils you need to get great performance out of your weapon, whether it's a shotgun, a rifle, or a gun. All our cleaning products are Made in Italy, developed in close collaboration with our experts to always get the most out of your weapon. Content:
    • Aluminum bar
    • 1 wool brush with Beretta Iconic color shoulder strap
    • 1 steel brush
    • 1 nylon brush
    • 1 bottle of "Factory Official CLP Gun Oil".
  • Basic cleaning kit for rifles. Cal 20 Cleaning The range of Beretta cleaning kits has been revamped to provide the user with a wide range of kits to facilitate the most thorough cleaning at home or in the field. Maintaining and cleaning your gun is important to ensure good performance: this is not only an advantage for getting better results when firing, but also helps to ensure greater safety as the problems caused by the presence of chemical residues in the vessels are avoided if they are not removed in a short time. Beretta also offers a full range of products for cleaning and maintaining your gun. This range includes all the accessories and oils you need to ensure the good performance of your weapon, whether it's a rifle, rifle or pistol. All our cleaning products are made in Italy, developed in close collaboration with our experts so that you always get the most out of your weapon. Packaging content:
    • 3-piece steel rod with PVC coating and ergonomic non-slip handle
    • 1 wool brush in the colours of the iconic Beretta shoulder strap
    • 1 spiral steel brush
    • 1 nylon brush
    • 1 bottle of Genuine CLP Gun Oil.
  • Not in stock - on order
    The Beretta Gun Oil Spray 125ml is ideal for cleaning your weapons to improve their appearance and protect them from future corrosion and wear. It also lubricates weapons to reduce damage caused by friction between moving parts.
  • Not in stock - on order
    Beretta firearms cleaning and maintenance Basic cleaning kit in small size, ideal to store in the backpack/purse/suitcase of the rifle or at home which consists of:
    • Plastic box with Beretta logo and two lockable snaps
    • Steel rod with plastic lid, divided into three pieces
    • Steel spiral brush
    • Wool brush
    • Nylon brush
  • Not in stock - on order
    Snap cap + woolly mop. They're protecting the pins. Spread the mop (with Beretta gun oil) to maintain and lubricate the room.
  • Not in stock - on order
    This complete Breakthrough® cleaning set is the perfect solution for the shooter who is looking for the ultimate cleaning solution. You will have both the tools and all the products to clean any gun from .22LR to .12G. All in a plastic ammunition box. Easy to store, easy to arrange. Features
    • Ammunition box style storage box
    • Toolbox in clear plastic with compartments, contains all tools
    • Cleaning rods for a total length of 94cm
    • Polymer T-handle
    • Nylon brush
    • .22/.223 cal, .30 cal, .357 cal/.38 cal/9mm, 10mm/.40 cal, .45 cal, 12G reinforced rigid nylon wipers
    • Adapter for shotgun rod
    • Brass holder for cleaning wipes for shotguns
    • Brass cleaning cotton holder - .22/.223 cal, .30 cal.
    • Brass cleaning cotton holder - .22 cal. up to 12 gauge
    • Cleaning pads
    • Microfibre 35 x 35 cm
    • Silicone cloth
    • Swab-its® Gun-tips® wipers
    • Breaktrough solvent for military purposes, 170ml
    • Battle Born High Purity Oil, 170ml
    • Battle Born HP PRO Oil, 57ml
    • Battle Born 12c PTFE enriched grease sprayer
    • Weight: 1360 g
    • Dimensions : 30,4 x 15,2 x 20,3 cm
  • These Breakthrough Clean Technologies® woven 100% Cotton Knit Patches are ultra-absorbent and effectively clean your firearms. These pre-cut patches are easy to use and available in a wide range of calibers to meet all your weapon maintenance needs.
    • Product length 0.75
    • Product Width 0.75
    • Product height 0.125
     
  • These Breakthrough Clean Technologies® woven 100% Cotton Knit Patches are ultra-absorbent and effectively clean your firearms. These pre-cut patches are easy to use and available in a wide range of calibers to meet all your weapon maintenance needs.
    • Ideal for running from .45 to .58 Cal
    • 100% cotton, ultra-absorbent patches
    • 540 cotton plasters measuring 6.3 x 6.3 cm (2-1/2" x 2-1/2")
  • Version 2.0 cleaning cords have an integrated T-handle for more effective cord pulling. The cords have an integrated bronze brush (1 for pistols and 2 for rifles and shotguns), which removes debris from the barrel. The extra-thick cord wipes away residue for superior cleaning. Easily detach the brass coupling from the flexible cable to wash the rope with soapy water if it gets too dirty. Battle Rope® 2.0 comes with a MOLLE-compatible protective holster – a must-have for your shooting bag! Features
    • Cable with integrated folding pull handle (also serves as a weight to pull the rope through)
    • Thick rope with 2 integrated bronze brushes for guns
    • Detachable cable
    • Semi-rigid storage case with zipper
    • MOLLE or carabiner attachment included
    • Dimensions: 15.2 x 11.4 x 3.8 cm
    • Weight: 226 g
    AVAILABLE CALIBERS
    • .22 CAL (small firearm)
    * Non-contractual photos, colors change depending on the caliber.
  • Version 2.0 cleaning cords have an integrated T-handle for more effective cord pulling. The cords have an integrated bronze brush (1 for pistols and 2 for rifles and shotguns), which removes debris from the barrel. The extra-thick cord wipes away residue for superior cleaning. Easily detach the brass coupling from the flexible cable to wash the rope with soapy water if it gets too dirty. Battle Rope® 2.0 comes with a MOLLE-compatible protective holster – a must-have for your shooting bag! Features
    • Cable with integrated folding pull handle (also serves as a weight to pull the rope through)
    • Thick rope with 2 integrated bronze brushes for guns
    • Detachable cable
    • Semi-rigid storage case with zipper
    • MOLLE or carabiner attachment included
    • Dimensions: 15.2 x 11.4 x 3.8 cm
    • Weight: 226 g
    AVAILABLE CALIBERS
    • .22 CAL (small firearm)
    • .22 / .223 Cal / 5.56mm (RIFLE / CARABINE)
    * Non-contractual photos, colors change depending on the caliber.
  • Version 2.0 cleaning cords have an integrated T-handle for more effective cord pulling. The cords have an integrated bronze brush (1 for pistols and 2 for rifles and shotguns), which removes debris from the barrel. The extra-thick cord wipes away residue for superior cleaning. Easily detach the brass coupling from the flexible cable to wash the rope with soapy water if it gets too dirty. Battle Rope® 2.0 comes with a MOLLE-compatible protective holster – a must-have for your shooting bag! Features
    • Cable with integrated folding pull handle (also serves as a weight to pull the rope through)
    • Thick rope with 2 integrated bronze brushes for guns
    • Detachable cable
    • Semi-rigid storage case with zipper
    • MOLLE or carabiner attachment included
    • Dimensions: 15.2 x 11.4 x 3.8 cm
    • Weight: 226 g
    AVAILABLE CALIBERS
    • .30 Cal (carbine)
    • .308 Cal (carbine)
    • 7.62mm (carbine)
    * Non-contractual photos, colors change depending on the caliber.
  • The Gun Care Set by Brunox is a portable set with maintenance and cleaning products for pistols, in a small polymer case. Inside are two pieces of Lub & Cor (liquid and aerosol) and Gun Care Spray. Easily take it to the shooting range and anywhere you need to clean your gun - it will fit in a pistol bag, toolbox or loose in the trunk. Gun Care Spray is a formula for cleaning, lubricating and caring for all types of weapons. It dissolves gunpowder, lead, tombac, copper and nickel residues and helps remove them. It then leaves an antistatic layer on the surface to protect against moisture, sweat and friction. The addition of Turboline® makes the coating last a long time and retains its properties at temperatures from -55°C to +78°C. Lub & Cor is a double-action lubricant and preservative: it ensures smooth operation of weapon mechanisms and protects them from corrosion. It easily penetrates into inaccessible places, and its protective properties remain for 5 months to 3 years (depending on the conditions of use of the weapon). For hunters and shooters. The practical cleaning kit for all ambitious users who value optimal and comprehensive weapon care. Including the complete care program. For long-term protection of the weapon. In a practical suitcase. Content
    • 1x Brunox® Gun Care, 100 ml spray
    • 1x Brunox® Lub & Cor, 100 ml dropper
    • 1x Brunox® Gun Care, 100 ml dropper
  • Brunox® Gun Care weapon maintenance spray is a special BRUNOX® product for cleaning weapons for hunting, shooting and weapon collectors. BRUNOX® is a Swiss quality product.
    PROPERTIES
    • Cleans, lubricates and maintains all metal parts
    • Displaces moisture and protects against rust
    • Dissolves powder, lead, tombak, copper and nickel residues
    • Neutralizes hand sweat
    • Excellent creeping characteristics; a thin viscose protective film is built up, which does not harden and does not harden
    • Contains no silicone, Teflon or graphite
    • Neutral to lacquer surfaces, leather, wood, rubber, plastic and textiles
    • Prevents short circuit as contact spray
    USE
    The addition TURBOLINE reduces the sliding resistance of all movable parts and thus ensures the function of repeating and automatic weapons, even at temperatures down to -55 °C. BRUNOX® Turbo-Spray® dissolves grease, organic and mineral dirt. BRUNOX® Turbo-Spray® contains only 3% propellant (CO2) and has a flash point of 78 °C.
  • Brunox® Lub & Cor is a non-curing multifunctional product, which can be used anywhere, where long-term lubrication and long-term corrosion protection are desired. Brunox® Lub & Cor forms an even, non-curing film, which completely covers even the smallest corners and seams. Brunox® Lub & Cor also lubricates under high surface pressure. Brunox® Lub & Cor penetrates the hinged part and does not just lie outside on it. Use and operation: If:
    • Quality lubricant, also for chains
    • Corrosion protection
    Before:
    • protecting industrial structures, installations, machines, vehicles, antique cars, garden fences, tools, etc.
    • lubricating chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, installations and many types of tools.
    Brunox® Lub & Cor also lubricates under high surface pressure. Brunox ® Lub & Cor can be removed with cleaning agents (surfactants), if the protection is no longer desired. Attributes
    • Brunox® Lub & Cor is free of heavy metals and free of mineral acids
    • Brunox® Lub & Cor does not drip
    • Brunox® Lub & Cor compliant with USDA class 2
    • Brunox® Lub & Cor complies with NSN 8030-25-100-4662
    • Brunox® Lub & Cor can be removed with an anionic solution
    • Brunox® Lub & Cor has a corrosion-resistant effect of approximately 1 to 11/2 years
  • Brunox® Lub & Cor is a non-curing multifunctional product, which can be used anywhere, where long-term lubrication and long-term corrosion protection are desired. Brunox® Lub & Cor forms an even, non-curing film, which completely covers even the smallest corners and seams. Brunox® Lub & Cor also lubricates under high surface pressure. Brunox® Lub & Cor penetrates the hinged part and does not just lie outside on it. Use and operation: If:
    • Quality lubricant, also for chains
    • Corrosion protection
    Before:
    • protecting industrial structures, installations, machines, vehicles, antique cars, garden fences, tools, etc.
    • lubricating chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, installations and many types of tools.
    Brunox® Lub & Cor also lubricates under high surface pressure. Brunox ® Lub & Cor can be removed with cleaning agents (surfactants), if the protection is no longer desired. Attributes
    • Brunox® Lub & Cor is free of heavy metals and free of mineral acids
    • Brunox® Lub & Cor does not drip
    • Brunox® Lub & Cor compliant with USDA class 2
    • Brunox® Lub & Cor complies with NSN 8030-25-100-4662
    • Brunox® Lub & Cor can be removed with an anionic solution
    • Brunox® Lub & Cor has a corrosion-resistant effect of approximately 1 to 11/2 years
  • Not in stock - on order
    THE FLUNA TEC OPTIC CARE SET For anyone who wants to clean and care optimally for hunting and sports optics. With this set, you get all the products you need for professional cleaning of the optics, including anticondens for all lenses. The set contains the following individual products:
    • Fluna TFT / optic cleaner 100ml (RETFT00701)
    • Fluna isopropanol 50ml (RIS0050120)
    • Fluna Anti Fog 50ml (ABG0050120)
    • Microfibre cloth 40 / 40cm
    • Glass polish 20/20 each packed
    • On the back of the inlet is a detailed product description.
    • The product description of the individual products in the set can be found in the relevant item.
    Instructions:
    1. First, remove loose dust from the optics – preferably by "blowing out" with a jet of compressed air.
    2. Clean the optics with the Fluna TFT/optic foam cleaner. Turn off electrical appliances for cleaning. Apply foam cleaner evenly thin (leave briefly inactive in case of strong pollution). Dry brush with the clean microfibre cloth.
    3. After cleaning, spray the glass of the optics with the isopropanol alcohol, to defropher the surface. Divide the alcohol with the included glass cloth and wipe away the excess liquid. Let the surface dry for a few seconds.
    4. Then spray the product Fluna spray against covering evenly thin on the glass surface and let the flow substance in for about 2 minutes. Then take the glass polish cloth and brush the glass surface evenly for as long until there is no more liquid to be seen and the glass surface is evenly covered and streakless. Allow the coating to dry for at least 30 minutes. To you can breathe against the glass. If the coating is applied correctly, the mist should dissolve immediately.
  • Use Fluna Gun Degreaser to clean the vessel from coarse dirt such as powder smoke, etc. Bring Fluna BORE PRO into the vessel, e.g. with a soaked felt pad or with a wet metal brush. Use a brushing stick guide. Make sure that the running steel is completely and evenly moistened. After the exposure time of approx. 15 minutes. moisten a metal brush (copper or brass) again with Fluna BORE PRO and push it in the barrel towards the bulkhead. Pay attention to caliber-precise brushes! With about 10 back and forth movements you brush away the metal deposits. Finally, wipe the barrel several times with clean felt pads or plasters and remove the deposit from the barrel. At the same time, the barrel is preserved by the remaining amount of Fluna BORE PRO, neutralization is not necessary. Alternatively, you can completely wipe the Fluna BORE PRO out of the barrel with Fluna Gun Degreaser and then preserve it as usual with Fluna Gun Coating. Attributes
    • Cleans and preserves
    • Very effective and fast results
    • Harmless to running steel
    Scopes For fast, dry cleaning of drawn and smooth barrels of rifles, pistols and revolvers. Do not apply to polished or otherwise treated metal surfaces, plastic or wood.
  • FAST BLUES - COLD BLUES Fluna Gun Black is a quick tan (cold browning) for repairing tanning on rifle and pistol barrels. It is also suitable for blackening small metal parts such as screw heads etc. Attributes
    • Easy to use
    • Good degree of blacking
    • Fast results
    Application First clean the damaged area thoroughly and degrease it with Fluna GunDegreaser, a degreaser or with alcohol. The damaged area can also be sanded again with sandpaper grain 1000 or with a scouring sponge. Use strong adhesive tape to clearly delineate the repair. Apply Fluna GunBlack thinly with a fine brush or cotton swab and let it dry. Repeat the process several times until the desired degree of blackening is reached. Then neutralize the repair with gun coating, drying and polishing. Finally, treat the repaired area again with Fluna GunCoating. Fluna Gun Black can in principle also be applied to a cloth for larger areas and the area to be treated can then be colored with the cloth by repeatedly sweeping it back and forth.
  • With the Fluna Gun Care Set 1, cleaning weapons has never been easier. With three Fluna Tec main products and matching microfiber cloth, you can clean your entire weapon without oil. From now on, you can rely on clean, economical and odorless gun cleaning and maintenance with ceramic coating. Cleaning firearms is usually not the most popular activity, but it is an extremely necessary one to ensure the desired features and smooth operation of firearms. The good news is that the products in Fluna Gun Care Set 1 are enough to completely clean and maintain your technically advanced firearms - without oil! - to clean and maintain them completely. Discover the time-saving and effective Fluna Tec system: clean all parts of the weapon, free the barrel from metal contamination and protect your weapon with the high-quality ceramic coating that professionals rely on. CONTENTS OF FLUNA GUN CARE SET 2
    • Fluna Gun Coating Aerosol 100 ml
    • Fluna Gun Degreaser 100 ml
    • Fluna Gun Cleaner 50 g
    • Microfibre cloth 40×40 cm
    1 / FLUNA GUN COATING AEROSOL Rely on the perfect care of your gun with the high-quality ceramic coating from Fluna Tec in the practical spray bottle. The transparent, residue-free and non-greasy coating can be applied to any surface. It convinces with high temperature resistance, the best corrosion protection and a long-lasting effect. 2 / FLUNA GUN DEGREASER With this special gun cleaner and degreaser in a bottle, you can remove oils, greases, waxes, gunpowder smoke, and other combustion residues. You can use the gun cleaner manually and in an ultrasonic bath. 3 / FLUNA GUN CLEANER Heavy duty barrel cleaning paste in a can is the perfect choice for smooth and serrated barrels of rifles, pistols and revolvers. Quickly and completely removes gunpowder residue, lead, copper and tombac from all types of barrels. 4 / LINT-FREE MICROFIBER CLOTH For a streak-free, thorough and residue-free cleaning of your gun, we recommend the microfiber cloth included in Gun Care Set 2. Wash your used cloth at 60°C in the washing machine without fabric softener. FLUNA TEC GUN CLEANING FOR SPORT AND HUNTING Professional teams have long relied on Fluna Tec's oil-free, economical and highly effective firearms cleaning and maintenance products. Produced to the highest standards and in constant compliance with the requirements of professionals and amateurs, Fluna Tec takes the care of valuable firearms, knives and optics to a new level.
  • PISTOL MAINTENANCE FOR BEGINNERS AND SWITCHERS With the Fluna Gun Care Set 2 you can say goodbye to conventional gun oil with all the known drawbacks. From now on, you too can benefit from modern and effective pistol cleaning and Gun Care with a resistant, high-quality ceramic coating for your technically demanding weapons. Do it the same way professional teams do: use weapon maintenance that is economical, easy to use, odor-free, and with a long-lasting effect. With just two products from the Fluna Tec family of maintenance products, you can clean and maintain your firearms and knives in just a few steps. Get to know Fluna Tec weapon maintenance with the practical starter set, experience it for yourself and use other products as desired in the future, making the tedious weapon maintenance a time-saving pleasure. CONTENTS OF FLUNA GUN CARE SET 1 Fluna Gun Coating Aerosol 100 ml Fluna Gun Degreaser 100 ml Microfibre cloth 30 x 30 cm 1 / FLUNA GUN COATING AEROSOL In the future, use Fluna Tec's high-quality ceramic coating for weapon maintenance. Firearms and knives are protected by the sparsely applied film; Moving parts permanently run as if lubricated - dry and without the disadvantages of conventional gun oil. 2 / FLUNA GUN DEGREASER Cleaning guns is so easy: with the special cleaner and degreaser, oils and greases, waxes, as well as gunpowder smoke and combustion residues are quickly and completely removed. Fluna Gun Degreaser in the practical bottle is suitable for cleaning by hand and in an ultrasonic bath. 3 / LINT-FREE MICROFIBER CLOTH Use the microfiber cloth from the kit to clean all parts of your gun and get a streak-free, shiny result. After use, simply wash the microfibre cloth in the washing machine at 60 °C without fabric softener. INTRODUCING FLUNA TEC GUN MAINTENANCE By choosing Fluna gun care set 2, you have taken the first step towards an oil-free future for your gun. You are in the best company, because professional athletes, hunters and special forces in many countries have already opted for Fluna Tec's economical, clean and effective weapon maintenance.
  • Fluna Gun Cleaner is a high-performance running cleaning paste. It removes gunpowder and metal such as lead, copper or Tombak from the barrel and can be used for smooth and drawn barrels of pistols or long weapons. Scopes For the fast, mechanical cleaning of drawn and smooth running of rifles, pistols and revolvers. Do not apply to polished or otherwise treated metal surfaces, on plastic or wood. Attributes
    • Easy to use
    • Cleans very effectively
    • Fast results
    • Safe for the drum steel
    APPLICATIONS Dip a clean felt plug in Fluna GunDegreaser or conventional degreaser and run it through the barrel to remove the coarse dirt. This can also be "dry" with a Bore-Snake. Then turn a plastic brush into Fluna GunCleaner and apply Fluna Gun Cleaner evenly several times in the barrel. Instead of the plastic brush, felt plugs or patches can also be used. The pasta works for about ten minutes, but don't let it dry! Then, with a bronze brush, mechanically remove the metal smear from the room in several movements. Use cleaning rod guide! After cleaning, remove the mixture of paste and metal grease from the barrel with Fluna GunDegreaser. Wipe the barrel until the white felt plugs come out of the barrel. Finally, treat the barrel with Fluna GunCoating. Store the can in a cool, dry place.
  • HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
    • Suitable for knives and all types of firearms
    • Can be applied to any surface
    • Transparent, residue-free, non-greasy coating
    • Very good sliding properties, long-lasting effect
    • Salt and freshwater resistant, economical in use
    • High temperature resistance from -40°C to +750°C
    • Does not shear, does not stick, is colorless and odorless
    • Cleaning the weapon is made easier
    MANUAL Fluna GunCoating is always applied to the cleaned weapon. Metal parts must be degreased before use so that the ceramic particles can adhere directly to the metal. Use Fluna Gun Degreaser for degreasing. Fluna GunCoating is sprayed thinly on the surface and then spread out with a lint-free cloth so that a thin, moist film is deposited on the surface. Fluna GunCoating then dries automatically. The coating is dry after approx. 30 minutes at room temperature and fully cured after approx. 2 hours. When using the vessel, make sure that the vessel is thoroughly cleaned beforehand. Fluna GunCoating is then applied thinly with cotton wool or a felt plug. The spray can is recommended for care of large surfaces. The liquid product in the dropper bottle should be used for coating small parts and adjusting the deductions.
  • HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
    • Suitable for knives and all types of firearms
    • Can be applied to any surface
    • Transparent, residue-free, non-greasy coating
    • Very good sliding properties, long-lasting effect
    • Salt and freshwater resistant, economical in use
    • High temperature resistance from -40°C to +750°C
    • Does not shear, does not stick, is colorless and odorless
    • Cleaning the weapon is made easier
    MANUAL Fluna GunCoating is always applied to the cleaned weapon. Metal parts must be degreased before use so that the ceramic particles can adhere directly to the metal. Use Fluna Gun Degreaser for degreasing. Fluna GunCoating is sprayed thinly on the surface and then spread out with a lint-free cloth so that a thin, moist film is deposited on the surface. Fluna GunCoating then dries automatically. The coating is dry after approx. 30 minutes at room temperature and fully cured after approx. 2 hours. When using the vessel, make sure that the vessel is thoroughly cleaned beforehand. Fluna GunCoating is then applied thinly with cotton wool or a felt plug. The spray can is recommended for care of large surfaces. The liquid product in the dropper bottle should be used for coating small parts and adjusting the deductions.
  • HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
    • Suitable for knives and all types of firearms
    • Can be applied to any surface
    • Transparent, residue-free, non-greasy coating
    • Very good sliding properties, long-lasting effect
    • Salt and freshwater resistant, economical in use
    • High temperature resistance from -40°C to +750°C
    • Does not shear, does not stick, is colorless and odorless
    • Cleaning the weapon is made easier
    INSTRUCTIONS Fluna GunCoating is always applied to the cleaned weapon. Metal parts must be degreased before use so that the ceramic particles can adhere directly to the metal. Use Fluna Gun Degreaser for degreasing. Fluna GunCoating is thinly dripped on the surface and then spread out with a lint-free cloth so that a thin, moist film is deposited on the surface. Fluna GunCoating then dries automatically. The coating is dry after approx. 30 minutes at room temperature and fully cured after approx. 2 hours. When using the vessel, make sure that the vessel is thoroughly cleaned beforehand. Fluna GunCoating is then applied thinly with cotton wool or a felt plug. The spray can is recommended for care of large surfaces. The liquid product in the dropper bottle should be used for coating small parts and adjusting the deductions.
  • HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
    • Suitable for knives and all types of firearms
    • Can be applied to any surface
    • Transparent, residue-free, non-greasy coating
    • Very good sliding properties, long-lasting effect
    • Salt and freshwater resistant, economical in use
    • High temperature resistance from -40°C to +750°C
    • Does not shear, does not stick, is colorless and odorless
    • Cleaning the weapon is made easier
    INSTRUCTIONS Fluna GunCoating is always applied to the cleaned weapon. Metal parts must be degreased before use so that the ceramic particles can adhere directly to the metal. Use Fluna Gun Degreaser for degreasing. Fluna GunCoating is thinly dripped on the surface and then spread out with a lint-free cloth so that a thin, moist film is deposited on the surface. Fluna GunCoating then dries automatically. The coating is dry after approx. 30 minutes at room temperature and fully cured after approx. 2 hours. When using the vessel, make sure that the vessel is thoroughly cleaned beforehand. Fluna GunCoating is then applied thinly with cotton wool or a felt plug. The spray can is recommended for care of large surfaces. The liquid product in the dropper bottle should be used for coating small parts and adjusting the deductions.
  • SPECIAL DEGREASER & CLEANER Fluna GunDegreaser is a special cleaner and degreaser for removing oils, fats, waxes, but also pillows and other combustion residues. Fluna GunDegreaser can be used manually or in an ultrasonic bath. Attributes
    • Cleans without residue and degreases at the same time
    • Easy to use, does not affect rubber and plastics
    APPLICATIONS Degrease Drip Fluna GunDegreaser on the designated area, divide it with a dry cloth and wipe it. Existing oils and fats are removed immediately and without residues. Repeat the process several times if necessary. Cleaning of walking Before Fluna GunCleaner or Fluna Bore Pro (drum cleaning products) is applied, the barrel must already be free of powder smoke and moist. To do this, use Fluna GunDegreaser. Put this on a clean felt plug and push it through the dirty vessel out of the room. After using Fluna GunCleaner or Fluna Bore Pro and scraping the metal smear with a bronze or copper brush, the barrel should be wiped out of the cartridge chamber with Fluna GunDegreaser until no more dirt can be seen on the felt plug. The barrel is then degreased at the same time and can be re-coated with Fluna GunCoating. Cleaning of rifle and pistol parts Drip Fluna GunDegreaser on the dirty surface and let it soak in for a while. Then, if necessary, loosen the dirt with a brush and wipe it with a cloth. After cleaning, the surface is also degreased and prepared for coating with Fluna GunCoating. Fluna GunDegreaser does not affect paint, rubber or molded parts. Fluna Gun Degreaser is also excellent at removing black powder residues
  • With Fluna Gun Oil we have developed a pistol oil that, as a CLP product, is a cost-effective alternative to the premium product Fluna Gun Coating. Fluna Gun Oil is a weapon oil of the latest generation and cleans, lubricates and maintains metal parts. Fluna Gun Oil is free of heavy metals and free of PCB, PCT and phenol. USE OF THE FLUNA PISTOL OIL Fluna Gun Oil should always be applied to the cleaned surface. It is not necessary to degrease the surface before application. For external application on pistols, the aerosol product is more suitable due to the spray pattern. For precise application, e.g. on sliding guides, use the liquid product with the practical dropper. Pistol oil is applied to the surfaces to be treated. PISTOL CLEANING WITH FLUNA TEC The constant and careful cleaning and care of all parts of the weapon guarantees the greatest pleasure and success in both the sport and the hunt. Fluna Tec offers a special product for every application. The Fluna Tec product family has been developed from practice and is used worldwide by professionals and ambitious amateurs.
  • BEST OPTICS CARE FOR HUNTING AND SPORTS The Fluna optical care set contains three coordinated products for residue-free cleaning, long-lasting protection and effective anti-fog coating. Prepare your high-quality optics optimally for sport and hunting and benefit from crystal-clear visibility in all temperatures and weather conditions. A clear, unobstructed view is an essential prerequisite for achieving the desired results in sports and hunting. Nothing is more annoying than a lens with streaks or fogged up that makes precise aiming practically impossible. With the Fluna optics maintenance set, you can ensure that your optics optimally support your ambitions at all times and under all conceivable external circumstances in just three simple and quick steps. 1 / FLUNA TFT OPTICS CLEANER With this special foam, which comes in a handy spray can, you can clean all types of optics, binoculars, riflescopes and spotting scopes. You can also clean flat screens such as navigation systems or hunting and sports cameras in no time. The alcohol-free optics cleaner does not penetrate the housing and is easy to use with a clean, dry cloth. 2 / FLUNA ISOPROPANOL With this product in the practical pump bottle, you can degrease all glass surfaces that you then want to treat with Fluna Anti-Fog. The anti-fog coating is especially popular in yacht optics, as it is exposed to different temperatures and weather conditions. Simply spray on, leave on for a few minutes and polish with a clean cloth (included in the kit). 3 / FLUNA ANTI-FOG The third product in the Fluna optical care set is an effective and durable solvent-based coating that is suitable for all types of glass - and in particular for hunting optics. With just a few sprays from the bottle onto the optics prepared with Fluna Isopropanol, a short exposure time and then polishing, you can apply an anti-fog coating whose effect lasts from a few days to weeks. 4 / LINT-FREE MICROFIBER CLOTH The microfiber cloth with a size of 40 x 40 centimeters is the best choice for cleaning your optics. Make sure it is always clean and dry during use for optimal results. After use, wash the microfibre cloth in the washing machine at 60 °C without fabric softener. 5 / EYEGLASS CLEANING CLOTH - POLISHING CLOTH To polish the lenses, it is best to use the lens polishing cloth from the Fluna Optik care set. Make sure it's clean and dry when you use it – this is the only way to ensure that the glasses are truly streak-free and one hundred percent clean. You can also use this special lens polishing cloth to polish the anti-fog coating for hunting optics. PISTOL MAINTENANCE WITH THE FLUNA TEC RANGE Cleaning, gun maintenance and the associated optical care should ideally be as simple as possible and require only a minimum of time. With Fluna Tec's cleaning and weapon care products, you choose products that are perfectly matched to each other and easy to use. Do as the pros in sport and hunting do and buy your Fluna optical care kit.
  • Not in stock - on order
    EASY CLEANING SILENCERS AND SUPPRESSORS. As with all parts of a firearm, the silencer also applies: regular cleaning protects against damage and retains the value of the suppressor. After about 50 to a maximum of 200 bullets, you should thoroughly clean and preserve your silencer - ideally with the Fluna Silencer Cleaner Set. The use of a silencer in hunting, as well as in sports, is recommended for several reasons. By dampening the muzzle radius, the hearing of man and dog is protected and the perception of the bullet impact is improved. In addition, the silencer reduces the recoil, which increases the chance of success. The interfering flash in diffuse light is also significantly reduced. By cleaning your silencer, you protect yourself and others and increase your marksmanship. CONTENT WEAPON CARE SET 4
    • Fluna SDR concentrate 250 ml (for 2 applications)
    • PVC lid for cleaning in solution
    • Microfibre cloth 40 x 40 cm
    1 / FLUNA SDR DAMPER CLEANER From now on, use Fluna SDR, the special cleaner and degreaser for all silencers, for the automatic cleaning of your suppressor. Fluna SDR automatically cleans metal surfaces from crumb smoke and all combustion residues. Simply put the detergent in the supplied bottle, place the damper disassembled or unassembled and you will achieve the desired result after 30 minutes to two hours without further effort. 2 / LINT-FREE MICROFIBRE CLOTH 40 X 40 CM Clean accessible areas on the silencer after removing it from the Fluna SDR cleaning solution with the included microfiber cloth. After use, it is best to wash the cloth in the washing machine at 60 °C without fabric softener. 3 / BOTTLE FOR DAMPER CLEANING The plastic bottle or lid is used to apply the cleaning solution by placing the silencer in it. After cleaning, wash the silencer thoroughly with water, dry it with a cloth and leave the hood open until it is completely dry. TUTORIAL FLUNA SDR APPLICATION Dilute half of the concentrate in the empty PVC lid with water in a ratio of 1:3 to obtain 500 ml of cleaning solution. If possible, disassemble the silencer and place it in the envelope containing the cleaning mixture. Fluna SDR now automatically cleans your silencer - depending on the degree of contamination within 30 minutes to two hours. Support the cleansing process by shaking gently from time to time. The cleaning solution acquires a more intense black color; this indicates a successful cleaning. Remove the silencer from the solution and clean the accessible areas with the microfibre cloth. Then rinse the Supressor vigorously with running water and loosen any dirt residue by beating and shaking. After drying, you can reassemble your damper. Tip: Check the material compatibility before the first use!
    CLEANING AND MAINTENANCE OF WEAPONS WITH FLUNA TEC Fluna Tec's experts are constantly working to make necessary and important weapon care as easy and straightforward as possible, while meeting the highest standards. Professional marksmen, action teams and hunters rely on Fluna Tec products - you too can use the Fluna Tec range to preserve the value of your firearms and knives!
  • AEROSOL FOAM CLEANER Fluna TFT/optics foam cleaner is a special foam for cleaning all kinds of optics, binoculars, rifle scopes, spotting scopes. Fluna TFT/Optical Foam Cleaner also cleans flat screens such as TFT - LCD monitors, laptop screens, televisions, PDAs, navigation devices, glass and mirrors. Fluna TFT/optical foam cleaner can also be used on plastic and rubber surfaces. Fluna TFT/Optical Foam Cleaner removes all household dirt such as dust, nicotine, insects, grease stains, fingerprints, patina from hand sweat and dust. Attributes
    • Extremely high stability
    • High cleaning power
    • Does not penetrate the housing
    • Cleans without leaving residue
    • Contains no alcohol
    • Simple application
    APPLICATION Hunting optics, e.g. rifle scope Before cleaning, blow off the optics with compressed air or remove the coarse dust. Spray Fluna TFT/optics foam cleaner from the front against the glass so that the expanding foam completely fills the space between the glass and the end of the rifle scope. After a short exposure time, walk along the grooved day side with a dry, clean cloth and thus remove the hanging dust from the sun visor. In a second step, spray the cleaner thinly on the glass and clean and polish it with a dry, clean cloth. Fencing Apply Fluna TFT / Optic Foam Cleaner evenly and thinly on the surfaces and leave on for a few seconds, dirt to loosen. Spread the product with a soft cloth and remove dirt. We recommend turning off the device during use. When cleaning plastics, we recommend a longer working time of the product.
  • Electric GAMO compressor, portable all-in-one, up to 320 bar to fill the tank of your PCP. With 220V "charger" and car. With Gamo you can easily and comfortably fill your PCP; Economic
    Compressor for PCP rifles 250 W
    · Maximum 320 bar, 3 loading phases; It's manual.
    · Voltage 220v, 220v charger (12V / 220V) or car connection
    · Weight: 9 kg
    ✔ Exhaust air: 11 l / min.
    ✔ Rising air flow rate: 2700 r.p.m./min
    – 0.5 air cylinder. It takes 6 to 7 minutes from 200 to 300 bars
    – 0.5 air cylinder. It takes 18 to 20 minutes from 0 bar to 300 bar 110 – 220 V
    Only to fill the "tank" of carbine or pistol, no large bottles.
  • Not in stock - on order
    200 ml Gunex oil spray is very effective, universal and environmentally friendly. Gunex oil never hardens and is suitable for long-term storage.
  • Ostermayer Hunting Weapons Corrosion Protection GOLD Extremely adhesive, protects against corrosion and aging. Ingredients:
    • Electrostatically charged for the strongest adhesion
    • Without PTFE and silicone
    Application: The agent is best applied to the metal with a dust-free cloth in an extremely fine layer. Good luck: Ostermayer Waffen corrosion protection reliably protects your weapon against corrosion and aging, even in extreme situations. Due to the electrostatic charge, the agent adheres to the place where you apply it and therefore no longer causes the trigger or the kulas to stick or wax. It absorbs smoke and salt residues and encapsulates them so that rust cannot develop. Neutral towards plastics. Extremely economical. Take care of your weapon with the excellent ostermayer hunting gold series weapon care products  
  • Not in stock - on order
    Heat-resistant pistol grease with microceramic additives, lubricates all types of guns and provides the highest possible protection against corrosion and wear. Gold Series pistol grease reliably protects your gun from loss of lubrication and wear thanks to electrically charged micro-ceramic grease particles. According to the latest scientific findings, the high-quality pistol grease ensures optimal performance of your gun, prevents jamming and ignition failures. Due to the very high temperature resistance from -50° to + 250° Celsius, your weapon also works under extreme conditions as you are used to. Emergency running properties are maintained up to more than 1200 ° Celsius and the fat does not liquefy even at very high temperatures. Read more about the high demands placed on our pistol grease and what you should pay attention to when lubricating pistols. Highest possible protection against corrosion and wear. Neutral compared to plastics and browning. PH level neutral. 30g in the aluminium can Ingredients:
    • Very complex pistol grease with microceramics.
    • Electrostatically charged lubricating particles
    • Free of PTFE and free of silicones
    Application: Apply the premium ceramic grease very sparingly to the weapon parts to be lubricated with your finger, cotton swab or brush. Testimonials can be found in our blog post. Maintain your weapon with the excellent weapon care products from the Gold series. Also ideal as a gift for hunters and shooters.

Title

Go to Top