- Lightweight carrying case
- Main Compartment
- 2 side pockets
- Zippered shoe compartment
- Handles with Velcro fastener
- Removable shoulder strap
- Administrative pocket on the front
- Semi-rigid panel at the bottom of the bag
- Anti-abrasion pads under the bag
- 100% nylon
- Dimensions: 51 x 30 x 25 cm
- Total volume : 40 liters
- Weight : 1 kg
- Color : Coyote (CB) and Black
-
Lightweight 40-liter carrying case, ideal for business trips or to the gym. The bag can be carried by hand or over the shoulder with the detachable shoulder strap. The bag has a compartment to keep shoes, sneakers, food or dirty laundry separate from the rest of the contents of the bag. Features -
The compact and minimalist Vigilant Chest Rig allows the wearer to carry the equipment needed to enter the field. It can be worn directly on the combat suit using the H-bands or directly on the plategilet, it has 2 T-adapters to fit into the MOLLE loops of the waistcoat. It can hold 4 AR long gun magazines (FAMAS, AR15, HK 416, G36, AR10 and AK 47) and 2 PA handgun magazines. It has a multi-pen admin compartment, a combat notebook, and a sturdy phone. There is also a small zippered pocket for a grenade. The abdominal pocket is attached to the chest with a Velcro strap and can be used for abdominal protection or as a MEDIC, EOD or other bag. Two Cyalume glowsticks can be worn on the sides of the box. This compact and versatile Chest Rig is suitable for indoor, outdoor and training missions. It allows you to make the same gesture to grab these immediate tools, regardless of your configuration (in plainclothes or equipped with your plategilet). Features- Compact, minimalistic and very versatile chest gutter
- Compatible with regular (H-bands) or MOLLE-waistcoat (T-adapters)
- Detachable H-shaped adjustable shoulder straps with female clips and equipped with a hook and loop square on the back for the identification of the back.
- Middle part with plate width (SAPI) with 4 male clamps
- The velcro middle section is compatible with sheet holders with a Velcro surface.
- 2 Female clips with T-adapters for the MOLLE loops of a plate holder combat gister
- 4 rear magazine slots with elastic fastening straps
- 2 pockets for PA magazines, knife or lamp with Velcro closure
- 1 carrying case with two-way zipper (suitable for grenades)
- 1 administrative bag with a transparent panel for reading route sketches or vital reminders, inside it has elastics for various pens, knives, combat notebook and phone
- 2 elastic bands on each side of the chest for wearing 2 glowsticks.
- Zipper with pull tabs for gloved hands
- Place 3 patch on the front of the pockets for identification
- Made of nylon with waterproof inside
- Available colors: Black and coyote
-
The F7 tactical LED light has been developed specifically for the needs of law enforcement agencies. This lamp has up to 4 white lighting modes and 4 different light intensities (1600 lumens, 600 lumens, 250 lumens and 10 lumens). The lamp can be used for a wide range of tasks, including nighttime roadside checks, professional interventions, remote person identification, and forensic and technical operations. The lamp is switched on by pressing the main switch on the back of the lamp. In the event of an emergency, to blind an attacker, the 1000 lumens high-intensity strobe light mode can be activated. If necessary, the F7 tactical lamp can be used to emit a distress signal in Morse code. TECHNICAL SPECIFICATIONS- White LED
- Battery Charge Indicator: Green +50% / Solid Red 50% to 30% / Flashing Red -30
- Turbo high intensity*: 1600 l / 2.25 h
- High intensity: 600 l / 4.5 h
- Medium intensity: 250 l / 6.5 h
- Low intensity: 10 l / 200 h
- Stroboscopic and SOS: 1000 l / 2.5 h
- Power supply: Rechargeable lithium battery (included) or 2 CR 123 lithium batteries
- Aluminium
- Rechargeable via USB-C
- 2 year warranty with normal use
- High-intensity lighting is the first in the cycle of available modes, so it can detect or blind a person at long range if law enforcement needs to respond and use their light in an emergency situation.
- Press the main switch. When the button is pressed lightly, the lamp turns on and off briefly when the button is released.
- To lock the light continuously, press the button until it clicks into place.
- The lamp will stay on, even if you let go of the button.
- To turn off the light, press the button again until it clicks into place.
- Once the lamp is turned on Turbo very high intensity, short press the footswitch next to the central button to access the other intensities.
- Each time you press the footswitch, you will activate the 600 lumens high-intensity mode, then the 250-lumen medium-intensity mode, then the 10-lumen low-intensity mode.
- Release the button when you're in the desired lighting mode.
- To do this, activate the lamp in continuous lighting mode, then press the pedal on the side of the main contact button for 2 seconds in a row.
- The strobe mode will be activated as described above, but after the two seconds of consecutive pressing, you can release the button and the lamp will keep its strobe illumination with the Morse SOS code.
- To turn off the lamp, short press the foot pedal to return to the previously selected continuous lighting mode, or directly press the main ignition button to turn off the lamp.
- F7 Tactical Flashlight
- 2600mAh Rechargeable Battery (1)
- Battery charger (USB cable, AC adapter)
- Cigarette Lighter Adapter
- Black Cordura Nylon Belt Pouch
- Spare belt and O-rings
-
Equip yourself with the 2" tactical belt set with its 1.5" self-grasping bottom strap, it allows you to take off your gear and without taking everything off or putting it back on, quickly and easily. It's stiff enough for maximum comfort and stability with plenty of equipment. It has a secure metal quick release and numerous MOLLE loops all around. Features- Combat belt for equipment
- Inner/outer tyre combination
- High density nylon hook and loop bottom strap
- Metal buckle with quick release
- MOLLE buckles for carrying extra equipment
- Belt height: 5 cm
- Lower belt height: 3.8 cm.
- 100% Nylon
- Total weight: 375 g (size XS/S)
- available sizes: XS/S and M/L
- Available colors: Black and coyote
-
This is a versatile and very practical universal turnstile holder. In addition to the turnstile, you can bring Gesco scissors and a marker. On the front, the Velcro fastener allows you to attach other identification patches, while hiding the bright red embroidered TQ for added discretion. Features- Universal holder
- Gesco scissor slot
- 2 elastic loops for 1 highlighter
- Patch lock with red embroidered TQ
- 2 Velcro fasteners to keep it in place
- Small mounting loop on top
- MOLLE mounting tab with snap button
- Vertical loop on the back
- 100% nylon
- Weight: 46 g
-
Not in stock - on order
You go to buy your first binoculars, but you can't see the forest for the trees. Vortex understands that your first binoculars should not be too big and certainly not too heavy. That is why Vortex has launched the Bantam HD 6.5x32 on the market. Specially developed for young people. The combination of 32mm lenses and 6.5x magnification gives you compact and lightweight binoculars. The ergonomic design ensures that you can easily hold the Bantam in the right position. The 6.5x magnification ensures a very quiet image, which makes the Bantam also suitable when you have difficulty keeping binoculars still. It weighs only 408 grams.Key features
- HD Optical System: Optimized with specific glass properties for exceptional resolution, less chromatic aberration and excellent color fastness, edge-to-edge sharpness and light transmission.
- ™ XR Lens Coatings: Premium anti-reflective coatings on all air-glass surfaces provide superior light transmission for exceptional clarity and low-light performance.
- Rubber housing: Provides a sturdy, non-slip grip and durable external protection
- Ergonomic design: For youthful hands
- Compact and lightweight
In practice
The Vortex Bantam HD 6.5x32 is intended for children who also like to go out in nature. The grip is small and ideal for children's hands. The Bantam HD has a larger field of view due to the smaller magnification.Features of the lenses:
- HD Optics, optimized with selected glass elements for exceptional resolution, reduced risk of chromatic aberration, excellent color fidelity and optimal light transmission. The Bantam HD is sharp from edge to edge.
- ™ XR Lens Coatings, Premium anti-reflection coatings on all air-glass surfaces provide superior light transmission for exceptional clarity and low-light performance.
Properties of the housing:
- The rubber housing provides a secure-slip grip and durable external protection.
- Waterproof O-ring seals prevent moisture, dust and dirt from entering. This way you are guaranteed reliable performance in all circumstances.
- Shockproof, the robust construction is resistant to bumps and even drops.
- Fog-free Argon gas cleaning prevents internal fogging of the binoculars over a wide temperature range.
- Roof-side prism for more durability and a more compact size.
Equipped with even more comfort:
- Adjustable eyecups, turn the eyecups up and down for comfortable viewing, with or without glasses.
- The center focus wheel adjusts the focus of the two binocular tubes at the same time.
- Diopter adjustment ring on the right eyepiece can be adjusted for differences in the user's eyes.
- Tripod connection, by means of an optional tripod adapter, the Bantam HD can be mounted on a tripod or car window mount. (See optional accessories)
Compared to the Vortex Crossfire HD and the Vortex Diamondback HD Bantam HD 6,5x32 Vanquish 8x26 Raptor 8,5x32 Magnification and Objective 6,5x32 8x26 8,5x32 Sharp from 4,0m 2.4m 4.6m Field of view (°) 7,6° 6,7° 7,4° Field of view at 1000m 133M 117m 130m Exit pupil 4.9mm 3.3mm 3.8mm Luminosity 24,2 10,6 14,1 Twilight number 14,4 10,6 14,4 Eye distance 18,7 15,0 14,0 Interpupil distance 51~69mm 57~71mm 50~70mm HD Optical System Yes Coatings ™ XR Lens Coatings Fully Multi-Coated Fully Multi-Coated Rubber Armor Yes Yes Yes Tripod Adaptable Yes Dimensions 12.4 x 12.2cm 14.5 x 11.4cm Weight 408g 652g 603g Unlimited Lifetime VIP Warranty
VIP stands for a Very Important Promise to you, our customer. We will repair your Vortex® product in case it fails. If we are unable to repair your product, we will replace it with a product that is in perfect working condition and in an equal or better physical condition. The VIP warranty does not cover loss, theft, intentional damage or cosmetic damage that does not interfere with the performance of the product.Specifications
Article number: 
42066532 Brand: Vortex Enlargement: 6.5x Type of binoculars: Roof side, Binocular use: Sports, Travel, Bird watching, Opera/theatre, Insects/Butterflies Exit pupil: 4.9mm Lens coating: XR Lens Coatings Prism type: BAK-4 Color: Green Dimensions: 12.4 x 12.2 cm (H x W) Weight: 408 grams Luminosity: 24,2 Schemergetal: 14,4 Field of view at 1000m: 133 meters Sharp from: 3.6 metres Coating: XR Lens Coating Objective diameter: 32 mm Gas-filled/waterproof: Yes Waterproof: Yes Focus: Central focus Twistup eyepieces: Yes Tripod: Yes Guarantee: Lifetime VIP warranty Delivery:
- 1x Vortex Bantam HD 6,5x32 Binoculars
- 1x Vortex carrying bag
- 1x Comfortable carrying strap
- 2x Lens caps
- 1x Eyepiece protection
- 1x Lens cloth
- 1x Manual (English)
-
The Vortex Crossfire II 1-4x24 AR Rifle Scope has had a complete redesign. It is brighter, stronger and lighter. In addition, the Crossfire series is built to surpass the performance of other rifle scopes in the same price range. A larger eye-relief, fast-focus eyepiece, fully multi-coated lenses and turrets with reset capability. The hard annodized aluminum tube is manufactured from one part. The nitrogen filling and O-ring seal ensure a complete water, mist and dust resistance. The Vortex Crossfire II 1-4x24 AR Rifle Scope offers the solution - and then some extra. Features of the Vortex Crossfire II 1-4x24 AR Rifle Scope:- Fully multi-coated lenses
- Tube made of one part
- Made of aluminium that is also used on aircraft
- Reset turrets
- Water-, mist- and dust-tight
- Hard annodized finish
- Fast-focus eyepiece
- Crossfire II II 1-4x24 V-Brite rifle scope
- Lens caps
- Cleaning cloth
- CR 2032 Battery
- Article number: 42243890
- Brand: Vortex
- Magnification: 1-4
- Lens diameter: 24 mm
- Eye relief (eye distance): 9.6-11.1 cm
- Field of view at 100m: 11-5 m
- Tube thickness: 30 mm
- Lens coating: Full multicoating
- Tube length: 32.3 cm
- Weight: 419 g
- Color: Black
- Mounting Length (mm): 323
- Gas filled: Yes
- Reticle type: V-Brite
- Reticle Lighting: Yes
- Lighting adjustability: 10 steps
- Reticle color: Red
- Parallax setting: 91 m (100 yards)
- Max. Width adjustment: 100 MOA
- Max. Height adjustment: 100 MOA
- Click value at 100m (in mm): 1/4 MOA (7.25 mm)
- Warranty: Lifetime
-
The Vortex Crossfire II 2-7x32 Rifle Scope Scout Scope is a versatile and practical rifle scope from the Crossfire series. The Crossfire series is built to surpass the performance of other rifle scopes in the same price range. A larger eye-relief, fast-focus eyepiece, fully multi-coated lenses and capped turrets with reset capability. The hard anodized aluminum tube is made of one part. The nitrogen filling and O-ring seal ensure a complete water, mist and dust resistance. The Vortex Crossfire II 2-7x32 is a Scout Scope rifle scope, this is expressed in the eye distance to the rifle scope. A regular rifle scope has an eye distance of about 8 to 9 centimeters, with the Scout scope this distance is 24 centimeters. Due to this greater eye distance, the Scout Scope can be mounted in front of a Scout rifle. This ensures that you can keep both eyes on the target and still use a rifle scope with a 2 to 7 magnification. You do this by focusing with both eyes, with one eye supported by the enlargement of the Scout Scope. It requires some practice but can give you a lot of benefit while shooting. Application Vortex Crossfire II 2-7x32 Rifle Scope This rifle scope is suitable for hunters who shoot with a Scout rifle, or rifles where the rifle scope must be mounted in front of the rifle. The Vortex Crossfire II 2-7x32 is a rifle scope with an eye distance of 24 cm which makes this possible. There are 2 types of crosshairs, a first focal plane and a second focal plane reticle. With a rifle scope with first focal Plane, the size of the reticle changes when you zoom in. So the reticle gets bigger when you zoom in and smaller when you zoom out. With a Second Focal Plane rifle scope, the reticle does not enlarge when you zoom in, it remains the same size. The Vortex Crossfire II 2-7x32 Rifle Scope scout scope is equipped with a second focal plane V-plex reticle. The V-plex reticle is the most popular, all-purpose hunting reticle which is suitable for a wide range of hunting applications. Lifetime Warranty Vortex Crossfire II 2-7x32 Rifle Scope Vortex unconditionally guarantees a well-functioning product, for life. You can count on the best quality products, with a very detailed finish. In the unlikely event that a defect occurs, you are covered by the VIP guarantee. Vortex Crossfire II 2-7x32 Rifle Scope Scout Scope:- Fully multi-coated lenses
- Tube made of one part
- Made of aluminium that is also used on aircraft
- Reset turrets
- Water-, mist- and dust-tight
- Hard annodized finish
- Fast-focus eyepiece
- 1x Crossfire II 2-7x32 V-Plex Rifle Scope
- 1x lens caps
- 1x Cleaning cloth
- 1x Full-color packaging
- Article number: 42243901
- Brand: Vortex
- Magnification: 2-7
- Lens diameter: 32 mm
- Exit pupil: 16-4.5
- Eye relief: 24 cm
- Field of view at 100m: 5.5-1.6m
- Tube thickness: 25.4 mm
- Lens coating: Full multicoating
- Tube length: 32.3 cm
- Weight: 354 g
- Color: Black
- Mounting Length (mm): 267
- Gas filled: Yes
- Mounting included: No
- Reticle type: V-Plex
- Reticle Lighting: No
- Parallax setting:91 m (100 yards)
- Max. Width adjustment: 60 MOA
- Max. Height adjustment: 60 MOA
- Click value at 100m (in mm): 1/4 MOA (7.25 mm)
- Focal Plane: Second Focal Plane (SFP)
- Warranty: Lifetime
-
The Vortex Crossfire II Hog Hunter 3-12x56 Rifle Scope is a rifle scope from the Vortex range that excels during most poor lighting conditions. The hard annodized aluminum tube is manufactured from one part. The nitrogen filling and O-ring seal ensure a complete water, mist and dust resistance. The full multi-coated lenses improve light transmission for maximum light and clear images. Furthermore, the Crossfire II Hog Hunter is equipped with a Second Focal Plane Reticle. This means that the reticle always maintains the same size, no matter what magnification you use. Finally, the Crossfire II has a V-Brite reticle with illuminated dot which makes its performance during poor lighting conditions even better. Due to its very specific properties, this rifle scope is extremely suitable for pig hunting at dusk, hence its name the "Hog Hunter". Features of the Vortex Crossfire II Hog Hunter 3-12x56 Rifle Scope:- Fully multi-coated lenses
- Second Focal Plane Reticle
- Tube made of one part
- Made of aluminium that is also used on aircraft
- Reset turrets
- Water-, mist- and dust-tight
- Hard annodized finish
- Fast-focus eyepiece
- 1x Crossfire II Hog Hunter 3-12x56 Rifle Scope V-Brite
- 1x Lens caps
- 1x Cleaning cloth
- 1x Lens hood
- 1x Colour packaging
- Article number: 42246224
- Brand: Vortex
- Magnification: 3-12x
- Lens diameter: 56 mm
- Eye relief (eye distance): 9.3-10.9 cm
- Field of view at 100m: 11-2.8m
- Tube thickness: 30 mm
- Lens coating: Full multicoating
- Tube length: 342 mm
- Weight: 791 g
- Color: Black
- Mounting Length (mm): 127
- Gas filled: Yes
- Mounting included: No
- Reticle type: V-Brite
- Reticle Lighting: Yes
- Reticle color: Red
- Parallax setting: 9.1 m (10 yards) to infinity
- Max. Width adjustment: 60 MOA
- Max. Height adjustment: 60 MOA
- Click value at 100m (in mm): 1/4 MOA (7.25 mm)
- Focal Plane: Second Focal Plane (SFP)
- Warranty: Lifetime
-
The Vortex Diamondback Tactical 4-16x44 Rifle Scope is specially designed for demanding hunters and shooters. Vortex built these viewers to meet the needs of tactical professionals, but with a high user-friendliness and therefore also very suitable for hunters. These rifle scopes offer the highest levels of performance and reliability. The Vortex Diamondback Tactical 4-16x44 Rifle Scope is built from a 30 mm aluminum tube of the highest quality. The rifle scope is made of one piece of aluminum which is also used in aircraft construction. Optically, the Tactical rifle scopes have impressive image quality, the XD™ lens elements are of high quality and offer an incredible resolution and crystal clear image. The lenses are XR™ fully coated which increases the light transition for optimal brightness. This rifle scope has a lens of 44 mm and therefore also has a high light output. Application Vortex Diamondback Tactical 4-16x44 Rifle Scope The Vortex Diamondback Tactical 4-16x44 Rifle Scope is ideal for hunting big game, but also for shooting pests and long range shooting (at the shooting range). With the 4-16x magnification you reach the target close to be able to shoot as targeted as possible. This rifle scope is a First Focal Plane rifle scope, this means that the reticle also zooms in. So the reticle gets bigger when you zoom in and smaller when you zoom out again. This is different with a rifle scope with Second Focal Plane, with these rifle scopes the reticle remains the same size when you zoom in. The reticle used in the Tactical Rifle Scope is an EBR-2C MRAD reticle, which offers extensive possibilities to make the right corrections during shooting. Lifetime Warranty Vortex unconditionally guarantees a good working product for life. You can count on the best quality products, with a very detailed finish. In the unlikely event that a defect occurs, you are covered by the VIP guarantee. Features of the Vortex Diamondback Tactical 4-16x44 Rifle Scope are:- XD extra low dispertion glass
- XR full multi-coated lenses
- First Focal Plane Reticle
- Tube construction in one part
- Precision Glide Erector system for a smooth zoom mechanism
- Fast focus eyepiece
- Reset turrets, re-indexing the "zero" on the turrets without using tools
- Mist-free, water- and dust-proof
- Very shockproof. Robust construction withstands the highest levels of recoil and impact
- Article number: 42234246
- Brand: Vortex
- Magnification: 4-16x
- Lens diameter: 44
- Eye relief (eye distance): 9.7 cm
- Field of view at 100m: 8.2-2.04 m
- Tube thickness: 30 mm
- Lens coating: Full multicoating
- Weight: 655 g
- Color: Black
- Mounting length (mm): 356 mm
- Gas filled: Yes
- Mounting included: No
- Reticle type: EBR-2C
- Reticle Lighting: No
- Parallax setting: 18.3 m (20 yards) to infinity
- Max. Width adjustment: 25 MRAD
- Max. Height adjustment: 25 MRAD
- Click value at 100m (in mm): 0.1 MRAD
- Focal Plane: First Focal Plane (FFP)
- Warranty: Lifetime
- 1x Diamondback Tactical 4-16x44 Rifle Scope
- 1x Lens cover
- 1x Lens hood
- 1x Lens cloth
- 1x Full-color packaging
- 1x Manual (English)
-
Vortex Diamondback Tactical 6-24x50 FFP Rifle Scope, EBR-2C Reticle (MRAD)
The Vortex Diamondback Tactical 6-24x50 Rifle Scope is specially designed for demanding hunters and shooters. Vortex built these viewers to meet the needs of tactical professionals, but with a high user-friendliness and therefore also very suitable for hunters. These rifle scopes offer the highest levels of performance and reliability. The Vortex Diamondback Tactical 6-24x50 Rifle Scope is built from a 30 mm aluminum tube of the highest quality. The rifle scope is made of one piece of aluminum which is also used in aircraft construction. Optically, the Tactical rifle scopes have impressive image quality, the XD™ lens elements are of high quality and offer an incredible resolution and crystal clear image. The lenses are XR™ fully coated which increases the light transition for optimal brightness. This rifle scope has a lens of 50 mm and therefore also has a high light output.Application Vortex Diamondback Tactical 6-24x50 FFP Rifle Scope
The Vortex Tactical Diamondback 6-24x50 Rifle Scope is ideal for hunting big game, but also for shooting pests and long range shooting (on the shooting range). With the 6-24x magnification you reach the target close to be able to shoot as targeted as possible. This rifle scope is a First Focal Plane rifle scope, this means that the reticle also zooms in. So the reticle gets bigger when you zoom in and smaller when you zoom out again. This is different with a rifle scope with Second Focal Plane, with these rifle scopes the reticle remains the same size when you zoom in. The reticle used in the Tactical Rifle Scope is an EBR-2C MRAD reticle, which offers extensive possibilities to make the right corrections during shooting.Lifetime Warranty
Vortex unconditionally guarantees a good working product for life. You can count on the best quality products, with a very detailed finish. In the unlikely event that a defect occurs, you are covered by the VIP guarantee.Features of the Vortex Diamondback Tactical 6-24x50 FFP Rifle Scope are:
- XD extra low dispertion glass
- XR full multi-coated lenses
- First Focal Plane Reticle
- Tube construction in one part
- Precision Glide Erector system for a smooth zoom mechanism
- Fast focus eyepiece
- Reset turrets, re-indexing the "zero" on the turrets without using tools
- Mist-free, water- and dust-proof
- Highly shockproof
Delivery:
- 1x Vortex Diamondback Tactical 6-24x50 Rifle Scope
- 1x Lens cover
- 1x Lens hood
- 1x Lens cloth
- 1x Manual (English)
- 1x Full-color packaging
Specifications
- Article number: 42234248
- Brand: Vortex
- Magnification: 6-24x
- Eye relief (eye distance): 9.9 cm
- Field of view at 100m: 5.49-1.37m
- Tube thickness: 30 mm
- Lens coating: Full multicoating
- Weight: 697 g
- Color: Black
- Mounting length (mm): 368 mm
- Gas filled: Yes
- Mounting included: No
- Reticle type: EBR-2C
- Reticle Lighting: No
- Parallax setting: 9.1 m (10 yards) to infinity
- Max. Width Adjustment: 19 MRAD
- Max. Height adjustment: 19 MRAD
- Click value at 100m (in mm): 0.1
- MRADFocal Plane: First Focal Plane (FFP)
- Warranty: Lifetime
-
Not in stock - on order
Simply put, the Impact rangefinder’s combination of excellent and reliable performance at a super economical price means you no longer have an excuse to head afield without a laser rangefinder. This lightweight, no-frills rangefinder is easy-to-use and features angle compensation for treestand hunters and casual range goers wanting precise horizontal distance to the target. The Impact joins all other Vortex rangefinders in the unique fact they are fully covered for life by the legendary VIP Warranty—including electronics. Runs on a single, long-lasting, easy-to-find, CR2 battery.Included in the Box
- Lens cloth
- Strap
- Soft carry case
- CR2 battery
Range Deer (yards): 400 yardsAccuracy: + / - 1 yards @ 100 yardsMax Angle Reading: + / - 60 degreesMagnification: 6xLinear Field of View: 341 feet/1000 yardsAngular Field of View: 6.5 degreesEye Relief: 15 mmLength: 3.77 inchesWidth: 2.95 inchesWeight: 5.5 ozDelivery time + - 1.5 week. -
The Vortex Red Dot Crossfire 2 MOA CF-RD2 is made of a strong construction which is compact and lightweight. The 2 MOA dot is as easy to aim as it is to shoot - it's easy to spot and fine enough for exact accuracy. The battery has a lifespan of 50,000 hours and is visible even at night at the two lowest intensities. With the included mountings, the Crossfire 2 can be mounted at various heights on a picatinny / weaver rail.Application Vortex CF-RD2
The Crossfire 2 MOA CF-RD2 can easily be mounted in various heights on a rifle that is equipped with a picatinny / weaver rail by means of the included mountings.Optical properties
- Fully Multi-Coated; Increases light transmission with multiple anti-reflective coatings on all air/glass surfaces.
- Brightness Levels; 11 levels.
- Unlimited Eye-relief; for fast target tracking.
- Parallax Free; Ensures that you do not have to keep your eye in the same place to be able to see through it properly and focus on your target.
- Night-Vision Compatible; The lowest two intensities are suitable for use at night.
Construction properties
- Waterproof; O-ring seals prevent the ingress of moisture, dust and dirt for reliable performance in all conditions.
- Matt anodized finish; Corrosion and wear-resistant anodization provide a matte glossy surface and help camouflage the shooter's position.
2 MOA Red Dot
- The Red Dot is easy to see and finds the target with simplicity, regardless of the lighting conditions or background.
Unlimited lifetime VIP warranty
VIP stands for a Very Important Promise to you, our customer. We will repair your Vortex® product in case it fails. If we are unable to repair your product, we will replace it with a product that is in perfect working condition and in an equal or better physical condition. The VIP warranty does not cover loss, theft, intentional damage or cosmetic damage that does not interfere with the performance of the product. Delivery:- 1x Red Dot Crossfire 2 MOA CF-RD2
- 1x Durable Rubber Protection
- 1x Protective caps
- 1x High mounting
- 1x Low 1/3 mounting
- 1x T-10 Torx key
- 1x CR 2032 battery
- 1x Lens cloth
- 1x Manual (English)
- Article number: 42300005
- Brand: Vortex
- Weight: 147 grams
- Magnification: 1x
- Dot size: 2 MOA
- Dot color: Bright Red
- Intensity levels dot: 11
- Max. Width adjustment: 100 MOA
- Max. Height adjustment: 100 MOA
- Click value at 100m (in mm): 1 MOA
- Parallax Setting: Parallax free
- Warranty: Lifetime
-
The Vortex Red Dot StrikeFire II SF-RG-501 is a compact red dot rifle scope, suitable for the heaviest recoils. The rifle scope is equipped with a 1x magnification and has a high quality optics. The StrikeFire II is manufactured from one part and is made of the same type of aluminum that is also used in the construction of aircraft. This makes the SF-RG-501 very solid and can therefore withstand heavy recoil. The fully multi-coated lenses improve light transmission and result in maximum light incidence and clear images. The nitrogen filling and O-ring seal ensure complete water, mist and dust resistance. Application Vortex Red Dot StrikeFire II SF-RG-501 The StrikeFire is ideal when searching for your target at short to medium range. The rifle scope can easily be attached to your weapon using the Cantilever mounting (included). When you have set the brightness to the lowest level, you can use the viewer up to 5,000 hours. The power supply takes place via one CR2 battery (included). In addition, the color of the dot can be adjusted, a red or green dot can be chosen. Optical properties- Fully multi-coated: increases light transmission with multiple anti-reflective coatings on all air and glass transitions
- Brightness levels: 10
- Unlimited eye-relief for fast target tracking
- Parallax-free: ensures that you do not have to keep your eye in the same place every time to be able to see through it properly and focus on your target
- Night vision compatible: the lowest two intensities are suitable for use at night
- One-piece frame: compact and lightweight
- Waterproof: O-ring seals prevent the ingress of moisture, dust and dirt for reliable performance in all conditions
- Fog-free: argon gas filling prevents internal mist formation over a wide temperature range
- Shockproof: the robust construction is resistant to recoil and bumps
- Hard anodized finish: Highly durable hard-coated anodization provides a glossy matte surface and helps camouflage the shooter's position
- The bright 4 MOA Red Dot is ideal for tracking targets in a fraction of a second.
- Article number: 42600004
- Brand: Vortex
- Tube length: 14.2 cm
- Weight: 204 gr
- Lens diameter: 30 mm
- Magnification: 1x
- Dot size: 4 MOA
- Dot color: Red/Green
- Intensity levels dot: 10
- Max. Width adjustment: 100 MOA
- Max. Height adjustment: 100 MOA
- Click value at 100m (in mm): 1/2 MOA
- Parallax Setting: Parallax free
- Warranty: Lifetime
- 1x Vortex Red Dot Strikefire II SF-RG-501
- 1x Cantilever mounting
- 1x Low 1/3 mounting
- 1x T15 Torx Key
- 1x Set Flip Cap Lens Protectors
- 1x CR2 battery
- 1x Lens cloth
- 1x Manual (English)
- 1x Full-color packaging
-
Not in stock - on order
The Vortex Red Dot Rifle Scope Venom is a visor built for extremely high performance and incredible versatility. The body is made of aluminum that is also used for aircraft and consists of one part. This makes the rifle scope very strong and can handle heavy recoil very well. The XR full multi-coated lenses improve light transmission for maximum light and clear images. The ArmorTek coating on the lenses ensures that they are protected against scratches and dirt. The nitrogen filling and O-ring seal ensure a complete water, mist and dust resistance. The lightweight Red Dot is full of beautiful features and lends itself to many weapons such as automatic rifles, pistols and rifles. The mounting fits on a standard picatinny rail.Features of the Vortex Red Dot Rifle Scope Venom:
- XR full multi-coated lenses
- ArmorTek coating on the lenses
- Tube in one part
- Mist-free, water- and dust-proof
- Shock-free
- Parallax free
- Bright Red Dot (extremely visible in daylight)
Lifetime warranty
Vortex unconditionally guarantees a well-functioning product, for life. You can count on the best quality products, with a very detailed finish. In the unlikely event that a defect occurs, you are covered by the VIP guarantee.Delivery:
- 1x Vortex Red Dot Rifle Scope Venom Top Load 3 MOA
- 1x Picatinny mount
- 1x T-15 Torx key
- 1x CR1632 battery
Specifications:
- Article number: 42300040
- Brand: Vortex
- Tube length: 4.8 cm
- Weight: 31 g
- Magnification: 1x
- Dot size: 3 MOA
- Dot color: Bright Red
- Max. Width adjustment: 100 MOA
- Max. Height adjustment: 130 MOA
- Parallax Setting: Parallax free
- Warranty: Lifetime
-
The SPARC AR2 has a robust construction which is compact and lightweight. The 2 MOA dot is as easy to aim as it is to shoot - it's easy to spot and fine enough for exact accuracy. The battery has a lifespan of 50,000 hours and is visible even at night at the two lowest intensities. With the included mountings, the SPARC AR2 can be mounted at various heights on a picatinny /weaver rail. Application Vortex Red Dot SPARC AR2 For anyone who wants reliable performance in any environment combined with easy operation, the Vortex Red Dot SPARC AR2 is the Red Dot of choice. Optical properties- Fully Multi-Coated; Increases light transmission with multiple anti-reflective coatings on all air/glass surfaces.
- Brightness Levels; 12 levels.
- Unlimited Eye-relief; for fast target tracking.
- Parallax Free; Ensures that you do not have to keep your eye in the same place to be able to see through it properly and focus on your target.
- Night-Vision Compatible; The lowest two intensities are suitable for use at night.
- One-piece frame; Compact and lightweight.
- Waterproof; O-ring seals prevent the ingress of moisture, dust and dirt for reliable performance in all conditions.
- Shockproof; The robust construction is resistant to recoil and bumps.
- Matt anodized finish; Corrosion and wear-resistant anodization provide a matte glossy surface and help camouflage the shooter's position.
- The Red Dot is easy to see and finds the target with simplicity, regardless of the lighting conditions or background.
- Article number: 42300010
- Brand: Vortex
- Weight: 213 grams
- Lens diameter: 22 mm
- Magnification: 1x
- Dot size: 2 MOA
- Dot color: Bright Red
- Intensity levels dot: 12
- Max. Width adjustment: 90 MOA
- Max. Height adjustment: 90 MOA
- Click value at 100m (in mm): 1 MOA
- Parallax Setting: Parallax free
- Warranty: Lifetime
Delivery:
- 1x Red Dot SPARC AR2
- 1x Rubber housing with Flip Cap
- 1x Standard mounting
- 1x Low 1/3 mounting
- 1x T-10 Torx key
- 1x AAA battery
- 1x Lens cloth
- 1x Manual (English)
-
Vortex Red Dot Rifle Scope Spitfire HD Gen II 3x
The updated Vortex Red Dot Rifle Scope Spitfire HD Gen II 3x offers ultra-fast playback even without lighting. The prism design and etched reticle solve the distortion problems for users plagued by astigmatism. The optics provide better sharpness and reduce chromatic aberration. In addition, the renewed Spitfire HD Gen II 3x with the layer of built-in turrets has a streamlined appearance and is lighter in weight and optically smaller. With the new mounting system, you are no longer limited to one mounting height.Application Vortex Red Dot Rifle Scope Spitfire HD Gen II 3x
The Vortex Red Dot Rifle Scope Spitfire HD Gen II 3x can be used on the shooting range but also works perfectly for hunting at the medium distance. It features new AR-BDC4 reticle design with bright red illumination for quick fixation at known distances. The Vortex Spitfire HD Gen II is also equipped with two night vision settings and the Red Dot can also be used when there is hardly any ambient light.Properties of the lenses
- HD Optical System; Optimized with selected glass elements for exceptional resolution, reduced chance of chromatic aberration, excellent color fidelity and optimal light transmission. The Spitffire HD is sharp from edge to edge.
- Fully Multi-Coated; For increased light transmission with multiple anti-reflective coatings on all air/glass surfaces.
Housing features
- Ultra compact and lightweight design; Robust construction that is still compact and lightweight.
- Waterproof O-ring seals prevent moisture, dust and dirt from entering. This way you are guaranteed reliable performance in all circumstances.
- Shockproof, the robust construction is resistant to bumps and even drops.
- Fog-free Argon gas cleaning prevents internal fogging of the binoculars over a wide temperature range.
- Matte black low gloss finish; Corrosion and wear-resistant anodization creates a matte surface with little glare and helps camouflage the shooter's position.
Features of the reticle
- AR-BDC4 Reticle; Purpose-built for the most popular 5.56 patterns.
- Illuminated reticle; 12 brightness levels improve low-light accuracy.
- Night vision compatible; make it possible to aim accurately even in the dark.
Spitfire 3x SPR-300 Enlargement 3x Ø Objective in mm 21 Reticle AR-BDC4 Reticle color Red Field of view at 100m in m 12,6 Eye distance in mm 67 Battery Type CR2032 Length in mm 76 Weight in grams Incl. battery and mounting 263 Lifetime warranty
VIP stands for a Very Important Promise to you, our customer. We will repair your Vortex® product in case it fails. If we are unable to repair your product, we will replace it with a product that is in perfect working condition and in an equal or better physical condition. The VIP warranty does not cover loss, theft, intentional damage or cosmetic damage that does not interfere with the performance of the product.Delivery:
- 1x Vortex Red Dot Rifle Scope Spitfire HD Gen II 3x
- 1x Rubber Lens Covers
- 1x Multi-Height Mount System - Lower 1/3 Co-Witness Height & Low Mount Height
- 1x Lens Cloth
- 1x CR2032 Battery
-
Vortex Red Dot Rifle Scope Spitfire HD Gen II 5x
The updated Vortex Red Dot Rifle Scope Spitfire HD Gen II 5x offers ultra-fast playback even without lighting. The prism design and etched reticle solve the distortion problems for users plagued by astigmatism. The optics provide better sharpness and reduce chromatic aberration. In addition, the renewed Spitfire HD Gen II 5x with the layer of built-in turrets has a streamlined appearance and is lighter in weight and optically smaller. With the new mounting system, you are no longer limited to one mounting height.Application Vortex Red Dot Rifle Scope Spitfire HD Gen II 5x
The Vortex Red Dot Rifle Scope Spitfire HD Gen II 5x can be used on the shooting range but also works perfectly for hunting at the medium distance. It features new AR-BDC4 reticle design with bright red illumination for quick fixation at known distances. The Vortex Spitfire HD Gen II is also equipped with two night vision settings and the Red Dot can also be used when there is hardly any ambient light.Properties of the lenses
- HD Optical System; Optimized with selected glass elements for exceptional resolution, reduced chance of chromatic aberration, excellent color fidelity and optimal light transmission. The Spitffire HD is sharp from edge to edge.
- Fully multi-coated: Increase light transmission with multiple anti-reflective coatings on all air glass surfaces.
Housing features
- Ultra compact and lightweight design; Robust construction that is still compact and lightweight.
- Waterproof O-ring seals prevent moisture, dust and dirt from entering. This way you are guaranteed reliable performance in all circumstances.
- Shockproof, the robust construction is resistant to bumps and even drops.
- Fog-free Argon gas cleaning prevents internal fogging of the binoculars over a wide temperature range.
- Matte black low gloss finish; Corrosion and wear-resistant anodization creates a matte surface with little glare and helps camouflage the shooter's position.
Features of the reticle
- AR-BDC4 Reticle; Purpose-built for the most popular 5.56 patterns.
- Illuminated reticle; 12 brightness levels improve low-light accuracy.
- Night vision compatible; make it possible to aim accurately even in the dark.
Spitfire 5x SPR-500 Enlargement 5x Ø Objective in mm 25 Reticle AR-BDC4 Reticle color Red Field of view at 100m in m 7,7 Eye distance in mm 69 Battery Type CR2032 Length in mm 92 Weight in grams Incl. battery and mounting 306 Lifetime warranty
VIP stands for a Very Important Promise to you, our customer. We will repair your Vortex® product in case it fails. If we are unable to repair your product, we will replace it with a product that is in perfect working condition and in an equal or better physical condition. The VIP warranty does not cover loss, theft, intentional damage or cosmetic damage that does not interfere with the performance of the product.Delivery:
- 1x Vortex Red Dot Rifle Scope Spitfire HD Gen II 5x
- 1x Rubber Lens Covers
- 1x Multi-Height Mount System - Lower 1/3 Co-Witness Height & Low Mount Height
- 1x Lens Cloth
- 1x CR2032 Battery
-
Walther tractor lock with rubber pad to protect the weapon. Suitable for pistols and rifles. -
Designed for 1 x 0.338 Lapua 8.6 mm x 70 mm mag for the L115A1 / 3 AW and AWM. This Warrior case also comes with black PosiGrip lining. It can also contain 1 x .300 Win Mag (7.62 mm x 67 mm) Mag bag or 1 x standard 7.62 mm x 51 mm. The .338 single mag takes 3 horizontal rows of MOLLE on compatible carrier rigs and bags. -
- The Warrior Assault Cargo Pack is a small backpack that can be attached to a ballistic vest or worn with the detachable shoulder straps, emergency shoulder straps,
- integrated 3-litre blowing compartment (bladder not included),
- large main compartment with zipper,
- small patched zip pocket with subdivision,
- Compression straps,
- 4 loops of Molleband each on 2 levels to attach additional bags,
- 2 Velcro closures for the drinks hose.
- Dimensions: approx. 18 x 18 x 38.5 cm (LxBxH),
- Weight: about 730 grams.
- Made from water-repellent 1000D Cordura, all tires according to US Mil Spec, the materials used have the lowest infrared values (99.8%) and are produced according to military specifications.
-
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The Dynamic Combat System (DCS) is a lightweight, unobtrusive system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The DCS can contain large plates at the front and back and has the option to wear side plates "6 x 6" or "6 x 8". NEXUS N.I.J. Level 3a Front, Back and Side Armor can also be used with I.C.W. style plates and for additional protection against I.E.D.s armor carrier, with detachable sides. The shoulders are fully adjustable and have an emergency release on one side, which frees the left shoulder area and allows the operator to remove the rig without taking off his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D Spacer Mesh lining is used for comfort and allows body heat away from the body surface while helping with airflow to cool. The DCS is designed to be worn in conjunction with the Warrior Frag Belt (sold separately). -
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for special forces requirements, PSD operations as well as Police Tactical Operations/SWAT. The shoulders are fully adjustable and have an emergency release on one side, freeing the left shoulder area and allowing the operator to remove the rig without having to remove his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). The DCS DA 5.56 mm (Direct Action) comes standard with 5 x Open Mags for 5.56 mm Magazines and 2 x Small Utility/Medic Pouch. -
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The shoulders are fully adjustable and have an emergency release on one side which frees the left shoulder area and allows the operator to remove the rig without having to remove the operator's helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). -
The Warrior Assault System Double 9mm Direct Action Mag Pouch can be used with and without a magazine lock, the plastic material on the inside in combination with the elastic band on the side prevents the warehouses from falling out, the warehouse safety can be opened with Velcro and fleece tape.- Dimensions: approx. 10 x 2.5 x 11 cm (LxBxH),
- Weight about 120 grams.
-
Warriors Elite Ops Single 9 mm Direct Action Mag Pouch is compact and allows the cover to roll down and secure with Velcro to allow quick access to chargers. The bag can contain 1 horizontal row of MOLLE on any compatible carrying belt or bag. -
The Warrior Assault System Triple 9mm Direct Action Mag Pouch can be used with or without the magazine protection, the internal plastic material combined with the elastic band on the side prevents the magazines from falling out. The magazine catcher can be opened with Velcro and Velcro. Suitable for calibers 9mm, .40 and .45 double row pistol magazines. Material- 100% polyamide (500D Cordura® Performance)
- US MIL-Spec webbing (with a tear strength of 1200 pounds)
- US MIL-Spec stitching, treated against mold.
- magazine holders with Velcro closure, can be folded forward when not in use.
- Elastic sides.
- PALS mounting loops for MOLLE system (25 mm).
- Water drainage eyes at the bottom.
- Dimensions: approx. 12.5 x 2.5 x 11 cm.
- Weight: approx. 150 g.
-
EMP pouches are designed to enable an unobtrusive solution that provides retention with the benefit of quick access for quick reloading. Designed for M4- and AK-style metal and P-Mags and offered in single dual and triple configurations to meet your operational requirements. -
Not in stock - on order
Double 5.56mm Magazine from Warrior. Suitable for M4 and SA80 magazines. The Double 5.56mm Open occupies 4 horizontal rows of MOLLE on compatible carry straps and bags. -
The Warrior Assault System Standard Grab Bag can be used as an E&E bag and has the following details: Main compartment with zipper and 3 dividers and Velcro opening for the cable channel: 1. Shallow compartment with 3 wide rubber belt loops, 2. Wide middle compartment with pocket for mobile phone or radio and loops for rubber straps for pens or glowsticks, 3. Shallow outer compartment with fully fleece-lined walls, including pistol holster with Velcro and single magazine pocket. The main compartment is well protected by a detachable lid with transparent card compartment (27x36 cm), this is secured with a Fastex closure.- The external Molle section is equipped with 3 modular M4 warehouse bags,
- side pocket for mobile phone with Velcro closure
- on the other side is a modular 9mm double magazine bag,
- on the back there is a pocket for the hose with Velcro where the hip belt can be stored,
- adjustable shoulder strap with Velcro and modular pocket for tools or magazines.
-
Warrior's Large Admin Panel is ideal to keep important paper/personal IDs safe. It has two pockets covered with a Velcro flap, a 9 mm pistol magazine and Velcro at the front for attaching a wide range of patches, eg blood type nationality flags etc. The large control panel takes up 4 rows of MOLLE on any compatible luggage carrier or bag. -
Not in stock - on order
Our Laser Cut Compact Dump Pouch can be attached to the belt or to any Warrior Series carrier. Made from a combination of Mil-Spec elastic and nylon for an ultra-compact design. To open, simply release the outer Hypalon safety tab, then pull the inner tab to fully open the bag. To repack, place the bag section back into the pocket and reattach the safety tab. This is attached with 2 MOLLE arms. Made from our high-quality composite laminate material and fabricated using our advanced laser cutting machines. Dimensions & Weight Length: 13 cm Width: 8.5 cm Height: 4 cm Weight: 0.083 kg -
Laser-cut elastic turnstile holder from Warrior Assault Systems for storing a C.A.T. turnstile. The Laser Cut Elasticated Tourniquet Holder is primarily intended for C.A.T. Turnstiles developed, but also fits on an S.O.F.T. Tourniquet, which is tight in the holder. The laser-cut material is made of high-quality composite laminate material. All threads are resistant to powdery mildew, UV light, water, heat and cold. All materials used have the lowest infrared values (99.8%) and are manufactured in the US according to US military specifications. material 500D Cordura®-nylon Details:- One-handed operation.
- Elastic bands on the side for compression and a secure grip.
- Closing flap with Velcro and reinforced finger loop.
- Laser-cut PALS mounting loop for MOLLE system (25 mm).
- IRR coating to reduce IR signature.
- Dimensions: approx. 11.5 x 4.5 x 3.8 cm.
- Weight: approx. 30 g.
-
Not in stock - on order
Our laser-cut IFAK bag is designed to store an operator's personal medical kit, including combat mesh, CAT and/or trauma bandage. They are all safely stored in a removable cover that fits into the outer cover. The cover and medkit are held securely in place by elastic sides and Velcro. A large tab with non-slip Hypalon coating is attached to the inner cover and if you pull it with force, the inner cover comes loose from the otter pouch, allowing you to open it quickly and easily with one hand. The Laser Cut IFAK is designed to be attached horizontally to one of our Warrior straps, by means of 4 MOLLE arms. It can also be mounted vertically using our Warrior 90-degree adapter. Please note, content is not included and for illustrative purposes only. -
The patent-pending Warrior's Medic Rip Off Pouch fits a wide variety of medical equipment. Elastic compartments and tabs organize the kit in order of use. Space for 2 x C.A.Ts 2 x compression bandages 2 x Quick Clot Combat Gauze Bolin Chest Seal Airway Scissors The pouch is held firmly in place by Velcro and supported by webbing. Pull back the Velcro and use the pouch in the traditional shape or pull the pouch to tear the pouch off the panel. Thus, it can be immediately passed on to another user or injured person, and the owner can continue with the mission or go to the target. The Medic Rip Off pouch takes up 4 rows of MOLLE on any compatible chest strap or bag. *Content not included, for illustrative purposes only. -
Warrior's medical scissor bag can contain 1 horizontal row of MOLLE on any compatible carrier bag or belt. *Scissors not included. -
Warrior's Medium Horizontal MOLLE Pouch is ideal for carrying a variety of accessories or Medic Kit, etc. This bag takes up 5 rows of MOLLE on each compatible chest strap or bag. SIZE High - 5.5 in (14cm) Wide - 8.6in (22cm) Deep - 3in (7.5cm) -
Warrior's Universal Strobe/Compass Pouch holds ACR MS-2000 uses ITW IR Clip for closure with elastic retention for added security. The pouch can contain 2 rows of MOLLE on any compatible carrying belt or bag. -
The Warrior Assault System Personal Medic Rip Off Pouch to store the first aid kit, the pouch can be separated from a platform by means of Velcro and Velcro straps, the platform stays on the vest /chest harness, wide opening 2-way zipper, inside elastic loops to attach the first aid kit. Dimensions: approx. 13.5 x 7.5 x 20 cm (LxWxH), weight approx. 325 g. The WAS equipment bags are equipped with a Molle fastening system, i.e.dat the bags can be attached very flexibly to vests, chest harness, backpacks and belts. Made of water repellent 1000D Cordura, all webbing according to US Mil Spec, the materials used have the lowest infrared values (99.8%) and are manufactured to military specifications. The filling material (Medic equipment) is not included. -
The Warrior PRR Radio Pouch can hold 2 horizontal rows of MOLLE on any compatible carrying belt or bag. -
Not in stock - on order
Warrior's discreet Armor Carrier has large plates in front, rear and stand-alone side plates. The RICAS Compact also has Nexus Level 3a Soft Armor on the front, back and inside around the arms. Offers 10% less protection than the original RICAS but offers improved mobility. Fully adjustable. -
Not in stock - on order
The RPC is the latest evolution of Warrior Assault Systems carriers. Designed as a lightweight and versatile low-profile wearer that offers enhanced mobility without sacrificing protection. The RPC is designed to make medium and large SAPI and ESAPI stand-alone s and the most common 10" x 12" I.C.W.s available. The bags are supported with 3D mesh for added ballistic performance comfort and body heat removal. The Recon carrier comes standard with ladder-style tummy straps that are attached to the front of the RPC via 2 removable ITW SR clips. This allows for quick access when entering and disembarking the RPC (ITW SR clips have a combined breaking strength of 600 lbs per side). The shoulders of the RPC can be worn in 3 different configurations as a smooth low profile with the addition of Velcro-lined shoulders and wrap around the sleeve for hydration and communication. The RPC comes standard with a removable MOLLE front cover held in place by 2 vertical SQM clips and strong Velcro, allowing the panel to be removed and replaced with a wide range of preconfigured weapon-specific pouch panels and Warrior's new Pathfinder Chest Rig. The RPC can be integrated with Warrior's new rear panel Made of high-quality fabric -
Warriors G36 Mag pouches are specially designed for H&K manufactured 5.56mm warehouses with fastening eyes on each side. Warrior's unique Mag-pouch design ensures a smooth draw without a snag. Covered Velcro flaps provide extra safety and prevent dirt and debris from getting into the loader bag. Each pouch contains a single charger. -
The 5.56mm M4 pouch contains 2 x M4 - SA80 style Mags (including P Mags) H&K 416 Diemaco Sig 516 etc... Has a rear cover that can be secured in open position in preparation for a rapid mag change. Each pouch has 2 MOLLE arms for attachment at the back and takes up 2 horizontal rows of MOLLE. -
EMP pouches are designed to enable an unobtrusive solution that provides retention with the benefit of quick access for quick reloading. Designed for M4- and AK-style metal and P-Mags and offered in single dual and triple configurations to meet your operational requirements. -
Not in stock - on order
Warrior's single frag-pouch can contain 2 horizontal rows of MOLLE on compatible carriers and bags. -
Warriors new H&K 417 Open Mag Pouch is designed for Heckler and Kochs 20 Round Composite Magazine. Retention is through 8mm bungee cord for quick and easy access. MOLLES on any Warrior Strap Chest Rig or Carrier. -
Warrior's famous Single Open D.A. 5.56 mm is now available with the addition of a 9 mm pistol magazine at the front. This "Kangaroo" bag can accommodate 5.56mm x 45mm M4-style metal and polymer warehouses. (NOT G36 warehouses). The main compartment is accessible via a bungee retension where the front gun warehouse is accessible via a Velcro closure. This has internal height adjustments to accommodate warehouses of different sizes. Each pouch has 2 MOLLE arms for attachment at the back and takes up 2 horizontal rows of MOLLE.