Name: Vigilant Lamp Kit F7
SKU: 3666178000333
Availability: Shipping within 24 hours! Also available in our walk in store.

Vigilant Lamp Kit F7

€93,95

Shipping within 24 hours! Also available in our walk in store.

The F7 tactical LED light has been developed specifically for the needs of law enforcement agencies. This lamp has up to 4 white lighting modes and 4 different light intensities (1600 lumens, 600 lumens, 250 lumens and 10 lumens). The lamp can be used for a wide range of tasks, including nighttime roadside checks, professional interventions, remote person identification, and forensic and technical operations. The lamp is switched on by pressing the main switch on the back of the lamp.

In the event of an emergency, to blind an attacker, the 1000 lumens high-intensity strobe light mode can be activated.

If necessary, the F7 tactical lamp can be used to emit a distress signal in Morse code.

TECHNICAL SPECIFICATIONS

White LED
Battery Charge Indicator: Green +50% / Solid Red 50% to 30% / Flashing Red -30
Turbo high intensity*: 1600 l / 2.25 h
High intensity: 600 l / 4.5 h
Medium intensity: 250 l / 6.5 h
Low intensity: 10 l / 200 h
Stroboscopic and SOS: 1000 l / 2.5 h
Power supply: Rechargeable lithium battery (included) or 2 CR 123 lithium batteries
Aluminium
Rechargeable via USB-C
2 year warranty with normal use

* The range of the lamp in high-intensity Turbo mode and in clear weather is about 240 meters.

HIGH-INTENSITY TURBO LIGHTING (1600 LU)

High-intensity lighting is the first in the cycle of available modes, so it can detect or blind a person at long range if law enforcement needs to respond and use their light in an emergency situation.
Press the main switch. When the button is pressed lightly, the lamp turns on and off briefly when the button is released.
To lock the light continuously, press the button until it clicks into place.
The lamp will stay on, even if you let go of the button.
To turn off the light, press the button again until it clicks into place.

CONTINUOUS LIGHTING AT HIGH, MEDIUM AND LOW INTENSITY (600, 250, 10 LU)

Once the lamp is turned on Turbo very high intensity, short press the footswitch next to the central button to access the other intensities.
Each time you press the footswitch, you will activate the 600 lumens high-intensity mode, then the 250-lumen medium-intensity mode, then the 10-lumen low-intensity mode.
Release the button when you’re in the desired lighting mode.

THE STROBE LIGHT CONTAINS A SIGNAL IN MORSE SOS MODE

To do this, activate the lamp in continuous lighting mode, then press the pedal on the side of the main contact button for 2 seconds in a row.
The strobe mode will be activated as described above, but after the two seconds of consecutive pressing, you can release the button and the lamp will keep its strobe illumination with the Morse SOS code.
To turn off the lamp, short press the foot pedal to return to the previously selected continuous lighting mode, or directly press the main ignition button to turn off the lamp.

COMPOSITION OF THE COMPLETE SET