Nitecore P20iX 4000 Lumen

The Nitecore P20iX works on four CREE XP-L2 V6 LEDs that provide a beam range of 221 meters, where the Nitecore P20i had only one LED. It works on the included 21700i Li-ion battery, but can also be used with two CR123 batteries. The end cap of this lamp is equipped with two switches: a tactical button and the “strobe ready” button. With this last button you activate the strobe function or the turbo mode, even when the lamp is off. In addition, the lamp has a memory function (only in daily mode) so that you can immediately switch on the last used mode.

Light modes of the Nitecore P20iX with a 21700 Li-ion battery

This flashlight has different light modes. When you use it with a 21700 li-ion battery with a capacity of 5000mAh, this lamp has the following lumen range:

• Turbocharger: 4000 lumens, maximum burning time 30 minutes*, 12200 candela
• Higher: 1700 lumens, maximum burning time 2 hours, 5250 candela
• High: 850 lumens, maximum burning time 2 hours and 30 minutes, 2670 candela
• Mid: 300 lumens, maximum burning time 7 hours and 15 minutes, 920 candela
• Low: 50 lumens, maximum burning time 38 hours, 150 candela
• Ultralow: 2 lumens, maximum burning time 350 hours, 5 candela
• Strobe: 4000 lumens
• SOS: 1800 lumens
• Beacon: 1800 lumens

Light modes of the Nitecore P20iX with 2 CR123 batteries

This flashlight has different light modes. When used with two CR123 batteries, this lamp has the following lumen range:

• Higher: 1060 lumens, maximum burning time 1 hour, 3360 candela
• Mid: 300 lumens, maximum burning time 3 hours and 30 minutes, 920 candela
• Low: 50 lumens, maximum burning time 14 hours, 150 candela
• Ultralow: 2 lumens, maximum burning time 120 hours, 5 candela
• Strobe: 1060 lumens

*The burning time of the highest light setting is calculated at the time of switching on the lamp in the highest setting. After 2-3 minutes, the lamp automatically switches to the lower light setting due to the temperature control.