-
Not in stock - on order
The new Velcro insert panel with much improved ways to be used. This panel makes it possible to attach the insert pockets in the Specialist backpack. Two sizes, one for the 30L and one for the 40L Specialist backpack. Attaches to the Specialist backpack with press studs Surface covered with Velcro loops Holes are punched into the panel, and the elastic cord that comes with the panels can be threaded through the holes to secure the equipment. Attach only one long side and reach the pockets under the panel Fits in: Anything – medical equipment, technical equipment, or personal items Beware: In the Specialist backpack Weight: 80 g Dimensions: 43 × 28 × 1 cm Contents and backpack not included. Just for illustrative purposes. -
The long curved spoon connects the spoon garage on the belt to the backpack. This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. The garage is attached to the combat belt. The outer compartment connects to the backpack. The outer compartment of the double spoon garage 2.0 connects to the backpack with the curved long spoon, which is placed in the adjustable spoon cover. The curved spoon moves with your hips to allow the legs to move freely through the backpack, minimizing energy consumption in your body. -
The webbing sleeve that attaches in the Squeeze vest/plate carrier to connect the long spoon to the spoon garage on the combat belt. Weight:30 g Dimensions: 22 x 5 x 1 cm *Additional equipment for illustrative purposes only. Not included. -
Kenmerken: The I-Bar is mounted where you want to attach your backpack, bag or Specialist backpack small. It can be mounted on any backpack, vest or sternum.How to assemble:
- Thread the strap under the strap on the platform where you want it to be.
- The strap should be laced in the direction the buckle should be pointing when attached.
- Pull the strap through the front hole of the buckle
- Pull the strap through the rear hole of the buckle
- Adjust the length of the belt
- Fasten the Velcro
- Pull the buckle to make sure it's secure
- Attach the other buckles you need
- Attach the bag/backpack etc and make sure the buckles are placed in the correct positions
-
The long spoon that connects the spoon garage on the belt to the spoon sleeve in the pinch vest/plate carrier. *Accessories and images for illustration purposes only. Not included. -
This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. It also has a quick-release buckle so you can quickly shed your backpack if you need to. The garage attaches to the combat belt to connect to the Squeeze plate carrier or vest in the inner pocket. The outer compartment connects to the backpack. The connecting piece is the long spoon or/and the curved long spoon. The long and long curved spoons are not included in the double spoon garage 2.0. *Atmospheric images and additional material for illustrative purposes only. -
The tie-down strap that attaches to our 90-130 liter backpacks and connects the long spoon to the double spoon garage on the combat belt. This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. The outer compartment of the double spoon garage 2.0 connects to the backpack with the curved long spoon, which is placed in the adjustable spoon sleeve. *Atmospheric photos and additional material for illustrative purposes only. Not included in the package. -
Two different mechanisms for attaching paper to our sleeves. Both have Velcro at the back. FBM-10B= Is an international 2-hole mechanism. 85 mm between the rings and the rings have a diameter of 40 mm. 50-00019-01-000= Is a Swedish standard mechanism with 4 holes. Color: Olive -
Attach the pouches to the Velcro panel or in the organized bag 4 color-coded zippered pouches to keep medical or technical equipment organized. Small bags: 18x16x7 cm and large bags: 32x15x7 cm 7 cm high sides Velcro on the back to attach the pockets to the Velcro panel in the Specialist backpack small Color-coded to make it easier to find what you're looking for Fits: Anything – medical equipment, technical equipment, or personal items Beware: In the backpack, specialist, small *Content for illustrative purposes only. -
Not in stock - on order
The perfect pouch to quickly put your empty magazines in during a firefight. Also useful for storing gloves, hearing protection, etc. Use it to put evidence or other important things in during a raid Basically, the pouch is designed to temporarily carry things you don't want in your hands Is worn rolled up in the bottom of the vest Pull the large D-ring when needed The drawstring with drawstring closure at the top can be tightened to tighten the opening of the pouch Capacity: 10L Suitable for: 8-10 x 5.56 magazines, earmuffs, gloves etc. Beware: Equipment vest, belt etc. -
The size is easily changed with the elastic cord. Low profile to make it easier to work in an open hatch or in a car. The elastic cord with heat shrink closure at the top is quick and easy to open Low cut for faster removal of the magazine. 25 mm MOLLE straps on the outside so you can attach other magazine bags to the outside. Two or more warehouse bags can be attached outside each other. Eyelet in the soil to let water through. The Tuck in attachment system makes it possible to attach the pouch to any vest or belt. The mounting system is easy to use on standard 25 mm MOLLE/PALS system. Storage compartments: 1 x 7.62 or 1 x 5.56 magazine or radio, pistol etc. Weight:95 g Dimensions: 8 x 11 x 3 cm -
An evolution of the classic balaclava, with a strong mesh over mouth and nostrils, allowing you to breathe freely - even during strenuous tasks - while still providing protection. Lightweight and thin enough to wear under a helmet, as protection from wind and cold, but airy enough to wear in warm weather. The Annaclava is cut long to cover the entire neck well. Flatlock seams for more durability and comfort. Use it as a hat by putting the excess material in the hat. Material: 59% Modacrylic/29% FR Polyester/9% Cotton/3% Elastane -
Not in stock - on order
Mechanism for attaching paper in our sleeves. Have velcro at the back. FBM-10B= Is an international 2-hole mechanism. 85 mm between the rings and the rings have a diameter of 40 mm. Color: Olive -
A strong steel hook for a 40 mm wide belt. -
A lightweight bag for your large handcuffs, which keeps them quiet and secure, easy to use and attaches to the equipment belt. The pouch is securely attached to the belt or vest Suitable for normal and large handcuffs Snap fastener with Velcro The Velcro closure makes it possible to close the pouch quickly and easily. The pouch is fully padded to reduce the rattling of the handcuffs and make the pouch as strong as possible The pouch does not absorb water, does not rot and does not soften in the rain The foldable fastening system makes it possible to attach the pouch to any vest or belt. The pouch can be attached to the belt without removing what is already on the belt. Open the fastening straps on the back of the case. Place the pouch on the outer belt. Thread the fastening strap under the horizontal strap on the pouch and close the fastening straps. Fits in: Handcuffs Beware: Service belt, Leg Platform, Equipment Vest and on the belt Weight: 60 g Dimensions: 11 x 11 x 4 cm -
Not in stock - on order
A padded pouch with drawstring closure. Thick fleece on the inside for protection. Can be used to store sensitive equipment such as night vision goggles. Fits in our Small Oyster pouch.- Weight: 38 g
- Dimensions: 23 x 17 x 2 cm
-
The perfect little bag to dump your empty magazines into during a firefight. Also useful for storing gloves, hearing protection, etc. Use it to store evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things that you don't want in your hands. You wear it rolled up in the bottom of the equipment vest. Pull the square D-ring if you want to open the pouch. Zipper at the top. Accommodates 4 warehouses. Attributes- Article number: 22-00301-56-000
- Weight:160 g
- Dimensions: 24 × 16 × 9 cm
-
A cool T-shirt with our logo on the chest and on the left sleeve. Grey= 60% Cotton/40% Polyester Olive= 100% Cotton *Note: Images are T-Shirts in Navy and Grey. -
The Snigel GP Pouch 3 2.0 has a removable elastic cord and a pull tab to facilitate use. A light pouch for general use to store small objects. The pouch is designed to be light and take up as little space as possible, while remaining strong enough for military use. Elastic band on the pouch to keep the contents safe even when the valve is open. Pull tab on the flap to open it easily, even with gloves on. Velcro flap and pull tab for easy opening The flap can be slid into the pouch and secured with Velcro, making it easier to access the items you carry in the case. Drain hole at the bottom. Thanks to the folding system, the pouch can be attached to any vest or belt. The bag has foldable Velcro straps at the back so that the bag can be worn horizontally on the belt. To wear it vertically, use the quiet and easy-to-use fold back system on the back of the case. This system makes it possible to attach the pouch without removing other pouches from the belt. Capacity: 0,2L Fits: Pepper spray short, short wide flash bulbs, distraction grenades, 40mm grenades, GPS, cell phone Fits: Equipment vest, belt, leg plate or leg mount. -
Not in stock - on order
A very light and tight belt with integrated compartments for secretly carrying equipment. Two layers of elastic keep your equipment safe and tight against the body. Stores communications equipment, baton, tear gas spray, pistol magazines, 5.56 magazines, a flashlight and other supplies for surveillance and security operations in 12 compartments. The bottom of each compartment can be opened with Velcro. Detachable plastic gun holster makes it easy to holster your gun. Velcro closed front. Adjustable elastic cord at the back. One size fits all Black only Weight: 400 grams Dimensions: 125 x 12 x 3 cm *No strap capacity included. -
A very light and waterproof backpack. Packed, it takes up only 2 liters of space. It is completely waterproof with taped seams and a roll closure at the top. Two flat 50 mm wide shoulder straps and one chest strap. Rolled ends on all tires to keep them tight. M7810-116011 KOMBI RYGGBRÄDA T, Kolli 2 Size: 30L. Dimensions: W=27, H=50 & D=18 cm. Weight: 340 g -
A practical model that has been used and refined for a long time, the product of years of development. A practical outer pocket with Velcro closure, to have ID:s or similar cards at hand. Two loops for a string (not included) in the top edge of the wallet, making it possible to carry the wallet around the neck with an ID card visible. On the inside a Velcro closed compartment for coins, two windows for ID cards and 4 pockets for credit or parking cards etc. There is also a box for membership cards etc. On the inside there is a full-width compartment for banknotes with a partition for storing foreign notes separately. Smaller pockets are sewn on the back of the inside to store business cards etc. Fits: Money, credit card, ID card etc. Beware: In your hand, around your neck or in your pocket -
A grey and black Snigel patch with the text POLICE. 90 X 25 mm. Velcro on the back, so that the patch can be attached to Velcro surfaces of bags and bags. *Image with stylo illustrating size. -
A grey and black Snigel patch with the text POLICE. 250 x 50 mm. Velcro on the back, so that the patch can be attached to Velcro surfaces of bags and bags. -
A case to store your documentation equipment, maps, pens, etc. in a place where you can reach and see them when you move. Attach it to the front of the vest or chest. Attach your normal pouches to the outside of this case. Compartment for cards, pens and paper. Includes ring binder mechanism with Velcro that can be easily removed. Cords to secure the pins. Half-covered holder for a cyalume, so you can see what you're looking at in the dark with minimal exposure. Water repellent and strong to protect the content. Fold-back mounting system makes it possible to attach the pouch to any equipment or ballistic vest with MOLLE straps. Cable openings in the bottom. Fits: A5 paper and block, pens, rubber, small ruler, small tablet computer (e.g. iPad™ or Panasonic Toughpad FZ-M1™), cards, light sticks and memo cards. Beware: On the equipment vest Weight: 370 g Dimensions: 21 × 27 × 4 cm *Contents in the pouches are purely illustrative. No content included. -
A grey and black patch with the text PRESS. 260 x 50 mm. Velcro on the back so that the patch can be attached to loop-shaped Velcro surfaces on bags and pouches. -
A grey and black patch with the dog's head and the text K9. 70 mm. Velcro on the back so that the patch can be attached to Velcro surfaces of bags and pouches. -
A grey and black patch with the text MOE for Method Of Entry. 50 x 25 mm. Velcro on the back, so that the patch can be attached to Velcro surfaces of bags and bags. -
The perfect little bag to put your empty magazines in during a firefight. Also good for storing gloves, hearing protectors, etc. Use it to preserve evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things you don't want in your hands. Rolled up in the bottom of the equipment vest, under another pouch it does not take up any space.... Pull the square ring down, naturally, when you want to open the case. Suitable for 4 warehouses. Attributes Weight:100 g Dimensions:4 x 12 x 35 cm Color: Black or Grey -
Has a removable elastic cord and a pull tab to facilitate the use of the pouch- A tight general pocket to store small objects.
- The pouch is designed to be as lightweight and space-free as possible, while remaining strong enough for military use.
- Velcro closed flap with pull tab on the flap for easy opening even with gloves on.
- The flap can be pushed into the pocket for easier access to the thing you're carrying in the pouch.
- Elastic cord, on the pouch to secure the contents, even when the valve is open. The cord can be removed.
- Bottom drain hole.
- Fold back fastening system makes it possible to attach the bag to any equipment, vest or belt.
- It has Velcro straps on the back so that it can be worn horizontally on the belt.
- It fits: Pistol magazine, multitool, flash light or other similar objects.
-
Not in stock - on order
This is a shorter replacement version, 75 cm long, of the regular backpack strap. (The regular belt is 83 cm long). The belt can also be used for our specialist backpacks. Attributes- Article number: 26-00910-09-001
- Weight: 500 g
- Dimensions: 100 x 14 x 2 cm
-
Not in stock - on order
No stock item. It is made to order and normally has a delivery time of 16 weeks. If you order 50 or more, the price drops, but the delivery time increases to about six months. Pieces can also be obtained separately. -
KEY FEATURES- The case is designed to be as lightweight and take up as little space as possible, while remaining strong enough for military use.
- Velcro closed flap with pull tab on the flap for easy opening even with gloves on.
- Velcro loop on the lid for a small patch.
- The flap can be pushed into the pocket for easier access to the thing you're carrying in the pouch.
- Elastic cord, on the pouch to hold the contents even when the valve is open. The cord can be removed.
- Bottom drain hole.
- Fold back fastening system makes it possible to attach the bag to any equipment, vest or belt.
- It has Velcro straps on the back so that it can be worn horizontally on the belt.
- CAT turnstile
- long 40 mm grenades
- Pepper spray
- Mobile phone
- Lamps
- Multi-tool
- Other objects of similar size
- 21-01855A01-013 Black
- 21-01855A09-013 Grey
- 100% Nylon -FR PU coated
- All fabrics and webbings are IRR compliant.
-
KEY FEATURES- Two full-length zipped side pockets in each side
- Attaches to the 50L Mission backpack 2.0 with zippers
- Can be worn together as a backpack or individually over the back.
- Can be worn individually around the waist.
- 6 webbing loops on the outside.
- 100% Nylon -PU coated
- All fabrics, buckles and belts are IRR compliant.
- The substance is FR.
- 2x11L
- H= 48, W= 21 & D=13 cm
-
MG AMMUNITION BAG -09 Fits in it: 200 x 5.56 mm or 200 x 7.62 mm or 200 cassette Beware: In your hand, over your shoulder or on the equipment vest functions:- The perfect case to carry ammunition for the SAW/Minimi machine gun
- For 200 rounds coupled 5.56 ammunition free of charge or in a cassette
- Also suitable for 7.62 coupled ammunition
- Can be used for 2 Cal 50 warehouses
- Webbing on both sides for attaching small bags
- The pouch can be attached to the vest or worn in a shoulder strap (not included)
- Article number: 22-00511-09-000
- EAN: 7332673301539
- Weight: 300 grams
- Dimensions: 18 x 19 x 8 cm
- Category: Holders & bags
- Color: Grey
-
30 years of experience in building large military backpacks. The main upgrade is the new "Herma" buckle, a buckle that is both brand and female in one buckle. That makes it possible to attach it wherever you want. No more searching for the right buckle to connect with. The depth of the backpack is small, but the width and lengths are long to carry what you need, but to be as close to your body as possible makes it easier to carry it. Shaped to sit nice and tight along the back. Stiff head hole and cut out in the lid so you can lean your head back when carrying the backpack. Shoulder pads are made of foam plastic and 1mm hard plastic for comfort and an even balance of weight. They have a chest strap and handset/microphone attachment. The main compartment has a large U-shaped opening with zipper to access the upper part of the backpack. The opening is covered with PALS on the outside. The sleeping bag compartment in the bottom of the backpack is also accessible through a U-shaped opening in the bottom of the backpack. This compartment is made variable in size so that a large sleeping bag fits in it. Two removable 11-litre side pockets with zippered opening on both sides that are accessible when you're on the backpack or in the tent. The side pockets can be connected as a backpack or worn separately. Top cover that can also be worn as a hip bag or small backpack. The top cover is designed to carry a spare sweater, mines, a drinking system, your administration book or something similar. 3L Zippered lid pocket for flashlights, spare batteries, insect repellent etc. Holder for a helmet, your poncho or something similar on top of the lid. Hip belt with plastic layer and sturdy foam for comfort and stability. It has steel O-rings so that a sled can be attached to it. The hip belt is attached in the middle, allowing you to move freely. Sled attachment points on the hip belt. Velcro patch for marking the owner. Roll up the ends of all the tires. The frame has been enhanced with a stiffer construction to make carrying the backpack even more comfortable. Size 100L Model: 29-01161C09-100 Weight: 5000 g Dimensions: 85 × 36 × 20 cm Color: Grey -
Not in stock - on order
The updated version of our 50L Mission backpack. The main upgrade is the new "Herma" buckle, a buckle that is both brand and female in one buckle. That makes it possible to attach it wherever you want. No more trying to find the right buckle to connect with. The interior is colored light gray to make it easier to find what you're looking for without becoming a beacon, visible to the enemy. A classic backpack with a lid. Designed to match the natural shape of your spine. The lid can be removed and used as a hip bag. It has an outer and inner zippered pocket and an elastic shock cord at the top. Roll top opening/closing in the main compartment keeps snow and dirt out. The bag has a frame with a plastic plate and aluminum bars on the back to make it sturdy, but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. They have a chest strap. Inner pocket and hanger for a drinking system. MOLLE strap on the sides of the backpack, to which more pockets can be attached. Two side pockets (26-02140A0-000) can be attached to the backpack with zippers (not included). On the back of the backpack, we added a holder that can be hidden inside the backpack or exposed to a helmet or other large piece of equipment. Padded hip belt with MOLLE strap to attach pockets. The belt can also be used as a lightweight combat belt. The hip belt is adjustable in height. Roll up the ends of all the straps to keep them tight. The Spoon sleeve, Double spoon garage and Curved Spoon are not included in the backpack. The pair of side pockets is not included in the backpack. Content: 50L. Article number: 29-00160B09-000 Weight: 2200 g Dimensions: 70 × 35 × 20 cm Color: Grey All fabrics, buckles and straps are IRR compatible! -
The blanket has a fleece construction with a high loft in combination with a waterproof and breathable outer fabric. The blanket has two functions: a traditional blanket and an insulated poncho worn over the shoulders. The blanket fits in its own compact bag measuring 19x13x24 cm. Laid flat, the blanket is 145 cm long, 80 cm wide at the foot and 110 cm at the top. The blanket is ideal for 24-48 hour missions and effectively repels the cold during rest or guard duty. The blanket can be easily attached around your shoulders with five press studs.- The blanket is made of fleece with a waterproof/breathable outer fabric.
- It can be used as a blanket or as a poncho over the shoulders.
- Perfect for a 24-48 hour mission.
- Keeps the cold away when you're asleep or on watch.
- With a push button, you can attach it over your shoulders.
- Packed in its own small bag, 17x12x23 cm.
-
12 mm flexible, ergonomic polyethylene knee pads. The pair of knee pads sits in the pockets on the inside of the pants, with the ribbed side facing inwards, to protect the knees. The text "This side towards the enemy" is placed on the outside of the pants. Holes have been punched into the knee pads to increase ventilation, making them cooler in hot weather. The lower part of the pads can be cut off to adjust the height so that it ends up on the knee when you kneel. The knee pad can be used in the Snigel combat pants Article number: 00-201669A01-000 Weight: 40 grams Dimensions: 25 x 18 x 2 cm -
The adjuster makes it easy to adjust the size of the equipment strap when changing from heavy winter clothing to light summer clothing Attach it to the right side of the belt and then thread it through the buckle The buckle is still on the left side and you use the belt as you are used to The safety belt is used as usual on top of the adjuster Dimensions: 22 x 5 Beware: 50 mm equipment straps -
keeps your personal belongings dry in the backpack.- 100% waterproof.
- Roll up the ends with a buckle on the side.
- Velcro patch that can be removed to mark the contents of the bag.
- Three bags in the set, small, medium and large for different items.
- Store and protect all your belongings in the backpack.
- Better than one big waterproof bag for backpacks with zipper openings and outer pockets.
- The largest bag contains your sleeping bag or spare clothing and is 70 cm high and 36 cm wide.
- The middle bag is 52 cm long and 26 cm wide.
- The smallest bag is 42 cm high and flat 20 cm wide.
- Article number: 26-01082A09-000
- Weight: 200g
- Dimensions: 30 x 5 x 5 cm
- Colour: Grey
-
Not in stock - on order
The Snigel Snigel 15-20L all pack is a lightweight backpack that can be used in many different ways. In fact, it's a simple package with a semi-covered zippered opening. It has MOLLE/PALS tires at the front. The inside is covered with Velcro, so our pockets can be attached there (pockets not included). Elastic cord compression on the sides Outside Velcro stripes so you can attach your markings. The package can be attached to our large backs, on our ballistic and non-equipment vests. It can also be worn alone. Fits inside: All types of equipment; radio, medical supplies or personal equipment. It may be:- Worn as a shoulder bag.
- Worn as a backpack.
- Wear around your waist.
- Attached to an equipment vest or a plate carrier with I-bars.
- Attached to a large backpack
- Weight: 860 grams
- Volume: 10-20L
- Dimensions: 45 x 30 x 10 cm
- Colors: Gray, Multicam
-
Snigel 6L funny pack -18 This is a versatile bag for many uses, also developed with Tactical Combat Causalty Care (TCCC) in mind.- For the group doctor or the technician who wants to carry the necessary equipment around the waist, on the back or attached to the backpack.
- Outside Velcro so you can attach your markings. MOLLE band.
- One large compartment with 2 removable interior walls.
- A small outer pocket with zipper.
-
The Snigel light combat belt is a lightweight, comfortable and slim strap for your first gear. Features- Padded belt with 2 MOLLE webbing sewn on the outside for a comfortable wearing of any type of pocket or holster.
- The MOLLE webbings are sewn on 8 cm wide MOLLE panels, with slots between the panels so that: the inner tube can be woven on the inside; or outdoors, depending on whether you want MOLLE mounting or belt mounting for holsters and other accessories.
- Remove the inner tube and use the riggers strap to combine the functions of both straps.
- On the inside of the belt, Velcro loop stripes are sewn to match/connect with a belt with Velcro on the outside.
- Four loops are sewn into the top of the belt so you can attach a harness or suspenders if necessary.
- The foam/1mm HDPE padding can be removed if you want an even slimmer strap.
- 100% polyamide PU-coated fabric.
- 100% polyester webbing
- 100% polyethylene foam and plastic plate.
- 13-01897A09-001 - 0H-J (XS/S): 82-120 cm
- 13-01897A09-002 - K-M (M/L): 94-132 cm
- 13-01897A09-003 -N-P (XL / XXL): 106-148 cm
-
Not in stock - on order
It is designed to carry and protect the Multipurpose pouch medium 10, Olive, but can also be used to wear and protect large lenses or other technical equipment. It has a stiff plastic layer around the sides to protect the contents of the bag. Shoulder strap MOLLE band on the sides Material: Polyurethane coated polyamide fabric Fits in it: NVG, large lens, camera, medical equipment or technical equipment Beware: Over your shoulder or around your waist functions: A simple bag with flap with zipper. Article number: ONVGP-10C Weight: 400 grams Dimensions: 14 × 18 × 23 cm Colors: Coyote Only available in color Coyote. Other colors are to illustrate the model. -
Not in stock - on order
Capacity = 50 litres Fits: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, plug-in optics or personal equipment for 24-48 hours Beware: Can be worn in the hand, over the shoulder or on the back. functions: A sturdy, reliable and versatile backpack for storing and transporting sensitive/sensitive equipment. The backpack can be custom made by the user for radio, first aid, photo kit/surveillance or technical equipment. The bag has a ventilated back with a plastic plate and an aluminum support on the back to make it sturdy but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. They have a chest strap and handset/microphone attachment. Thick padded waistband. The bag is made of wear-resistant coated polyamide and has a sturdy zipper. Long heavy zipper with long drawstrings. The zippers are long so that the backpack can be fully opened. 4 compression straps on the side are sewn to the backpack. The loose ends of the side compression straps roll up and are fastened with Velcro. The bag has one carrying handle on the top. Main compartment has 2 inner pockets with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment. The outer pockets have a zipper and they each have an elastic mesh pocket with zipper on the inside for the different things you need to store. The lower compartment is suitable for 15" field laptop/computer or supplement/replacement clothing. MOLLE webbing to attach bags/bags for first aid equipment, holders for radios etc. are placed on the outside of the outer pockets. An optional medical wall can be mounted with straps in the middle of the backpack. The wall remains vertical when the backpack is open. A man pack radio can be secured with two straps close to your back for the best weight distribution and balance. Two holes for cables or a tube are placed at the top of the backpack in front of the drinking system. Optional set of plug-in bags (65-01290A00-888) is ideal for organizing in the backpack for medical equipment. Optional rain cover in grey (65-01736A09-000) Optional snow cover in white (65-01736A26-000) -
An A4 paper storage and carrying case. Internal compartments for pencils, papers and other administrative items. Internal window box for cards or paper. Water repellent and strong to protect the content. MOLLE tires and Velcro at the front. Handle at the top. Size: A4+. Internal compartments for laptop charger and mouse. Internal compartment for a laptop. Outer compartment with zipper at the back. -
Not in stock - on order
SPEED MAGAZINE POUCH 2.0 The size is easy to change with the elastic cord. Low profile to make working in an open hatch or in a car easier. The elastic cord closure in the top is quick and easy to open Low cut out to remove the warehouse faster. 25 mm MOLLE tires on the outside so you can attach other bags to the outside. Two or more warehouse bags can be attached outside each other. Eyelet at the bottom to leave out water. Tuck-in mounting system makes it possible to attach the pouch to any equipment vest or strap. The mounting system is easy to use on both the standard 25mm MOLLE/PALS system. Storage capacity: 1 x 7.62 or 1 x 5.56 magazine or radio, pistol etc.
