-
Our Laser Cut Compact Dump Pouch can be attached to the belt or to any Warrior Series carrier. Made from a combination of Mil-Spec elastic and nylon for an ultra-compact design. To open, simply release the outer Hypalon safety tab, then pull the inner tab to fully open the bag. To repack, place the bag section back into the pocket and reattach the safety tab. This is attached with 2 MOLLE arms. Made from our high-quality composite laminate material and fabricated using our advanced laser cutting machines. Dimensions & Weight Length: 13 cm Width: 8.5 cm Height: 4 cm Weight: 0.083 kg -
The Pentagon Renegade Tropic is a comfortable, lightweight pant made of elastic 4-way stretch material with a water-repellent finish and reinforcements in the knee and ankle area. Thanks to the elastic 4-way stretch material, the pants dynamically adapt to every movement and do not pinch. The Renegade Tropic is lightweight and easy to carry, even in warmer temperatures. Details:- Elastic 4-way stretch material.
- DWR impregnation (durable water repellent).
- Triple-stitched stress points.
- YKK® main zipper, jeans button and extra safety button.
- 7 belt loops (50 mm).
- 2 key loops, suitable for D-ring/carabiner.
- Contoured and reinforced knee area.
- Slot for knee pads (optional).
- Strengthens ankle area.
- Adjustable leg cuffs with elastic drawstring.
- 2 side pockets with reinforcements.
- 2 slit pockets at the back.
- 2 flat thigh pockets with zipper.
- 1 thigh pocket with slit.
- Breathability: 3,000 g/m²/24h.
-
The Pentagon Renegade Tropic is a comfortable, lightweight pant made of elastic 4-way stretch material with a water-repellent finish and reinforcements in the knee and ankle area. Thanks to the elastic 4-way stretch material, the pants dynamically adapt to every movement and do not pinch. The Renegade Tropic is lightweight and easy to carry, even in warmer temperatures. Details:- Elastic 4-way stretch material.
- DWR impregnation (durable water repellent).
- Triple-stitched stress points.
- YKK® main zipper, jeans button and extra safety button.
- 7 belt loops (50 mm).
- 2 key loops, suitable for D-ring/carabiner.
- Contoured and reinforced knee area.
- Slot for knee pads (optional).
- Strengthens ankle area.
- Adjustable leg cuffs with elastic drawstring.
- 2 side pockets with reinforcements.
- 2 slit pockets at the back.
- 2 flat thigh pockets with zipper.
- 1 thigh pocket with slit.
- Breathability: 3,000 g/m²/24h.
-
Pentagon Tactical Baseball Cap with Velcro panels for friend and foe identification on the front, back and on the cap. Six-panel cap designed for tactical use. The fixed visor offers good protection from the sun and the cap is adjustable at the back with a Velcro closure. Specifications- 65% Polyester 35% Cotton
- 215 grams rip-stop fabric
- 6-panel design
- Stiffening plate at the bottom
- IR Hook n Loop patch on top
- Flag/team or morale patch on front and back
- Size adjustable strap
- One size fits all
-
Not in stock - on order
The universal Picatinny MagRail attaches to the bottom of your magazine plate so that you can attach the MantisX (not included) to your weapon if it doesn't have an existing rail. Recommended if you don't have a compatible holster and want to train with one. Features- Small Picatinny rail for all types of flat bottom warehouses
- Requires flat magazine plate to stick high-strength VHB adhesive tape (included)
- Tape is highly resistant to live fire conditions
- Can be removed and reapplied by applying pressure and allowing to dry for at least 20 minutes before use
-
Large, multifunctional waist bag suitable for various specialized activities and tasks. Versatile internal organization and numerous external attachment points. Quickly attaches to backpacks in a variety of ways, allowing you to use the Askare as part of a modular, scalable backpack system. "Askare" is Finnish for "task" or "chore", it's as simple as that. This backpack was originally designed for sniper teams to carry various shooter/spotter-related gear, but has proven to be a great asset for all kinds of tasks both inside and outside of military origins during development. The large seven-litre capacity plus numerous external mounting options make this a very versatile general-purpose bag. On the inside, the bag has a number of options for organizing your belongings: elastic webbing loops of different sizes, flat pockets, attachment loops, and a loop surface for attaching organizers with hooks. On the back wall, two rows of 50 mm elastic webbing are sewn, forming loops of different sizes. The bottom row is sewn in two large, approx. 17 cm wide loops (designed for .50 cal Barrett magazines). The top row is sewn in three smaller, approx. 12 cm wide loops (designed for HK417 magazines). Each end of the bag has an elastic loop for smaller items. The front wall has two flat compartments with attachment loops at the top. A loop area of 35 x 10 cm on the inside of the front makes it possible to attach all kinds of organizers with hooks, etc. A large, open compartment on the back of the backpack has a removable closed cell foam pad on the inside and allows you to store the waist belt if needed. This open compartment can also be used as a huge belt loop if you want to carry the Askare on a belt or the waist belt of a backpack. The PALS webbing on the sides allows you to attach small pockets and accessories to the outside of the backpack. The horizontal webbing on the front of the backpack can be used to attach small pouches such as our Multitool pouch, Tourniquet pouch and Zipped GP pouch 2x2, or elastic drawstring loops. The many loops on the sides of the backpack can be used to attach elastic cord to carry all kinds of items on the bottom and front of the bag, turnstiles, ponchos, tarps, whatever. WEARING OPTIONS Due to its large size, the Askare carries the best on your lower back, rotate it forward for easy access. The strap is also long enough to carry the bag on your back like a sling pack. The strap is attached to large triangular wings for stability. For longer backpack movements, you can quickly attach the Askare to the compression straps on the side of your backpack. To do this, you'll need to add suitable buckles (2M PALS mount or split-bar female buckles) or use G-hooks. No quick-release buckles are included with the bag. You can also quickly attach the Askare to the side of your backpack by threading the compression straps on the side of the backpack through the large belt loops on the front of the bag. The strap can be stored in the open compartment on the side of the bag when you carry it on your backpack. Lower your backpack, detach the Askare, take out the strap, put on the packed bag and you're ready to get to work. KEY FEATURES- Capacity approx. 7 litres
- 40 mm SR belt (max. circumference approx. 145 cm) attached to stabilizing wings
- Flat open pocket on the body side for storing the belt
- Thin, closed-cell foam padding on the torso side for shape retention and comfort
- One large zippered compartment
- Two small flat internal compartments
- Numerous elastic loops for internal organization
- Two attachment points on the inside for dummy cords and carabiners
- 35 x 10 cm loop area on the inside for organizers with hooks
- 2 x 2 PALS weaving tapes on both sides
- Numerous 25 mm webbing loops for elastic cords and backpack attachment buckles
- 15 x 10 cm loop surface on the outside for patches and identification plates
- Water drainage at the bottom
- All color options offer good NIR performance
- 5-year material and product warranty
- Made in Finland/Estonia
- Weight: 445 g
- Dimensions: 35 x 20 x 9 cm (W x H x D)
- Main fabric: 500D Cordura (100% Polyamide)
- Strap: 100% polyester
-
Compact waist bag with versatile internal organization and external attachment points. Waist bags are already very versatile, but the Kukkaro is even more so thanks to the many ways you can customize it to suit your specific needs. On the inside, the bag has a number of options for organizing your belongings: elastic webbing loops of different sizes, flat pockets, tie-down loops and a loop surface for attaching organizers with hooks. The back wall has a large flat compartment for larger items. On top of the compartment is sewn a single row of 50 mm elastic webbing, which contains two smaller approx. 4 cm wide loops and a larger approx. 9 cm wide loop, suitable for small items such as multi-tools, lighters etc. The front wall has two small flat compartments with attachment loops at the top. An 18 x 10 cm loop area on the inside of the front makes it possible to attach all kinds of organisers with hooks, etc. A large, open flat pocket on the back of the backpack allows you to store the waist belt if needed and it can be used as a large belt loop if you want to carry the Kukkaro on a belt or the hip belt of a backpack. The PALS webbing on the side wings and bottom allows you to attach small pockets, elastic cords and accessories. The straps on the side wings can also be used to quickly attach the backpack to the compression straps on the side of a backpack using additional SR buckles or G-hooks. Such buckles or G-hooks are not included with the backpack. Learn Finnish with Savotta: "Kukkaro" is Finnish for a bag or pouch that is a type of handbag, but not a handbag, nor just any small bag. The free Finnish online dictionary www.sanakirja.org defines "kukkaro" as "a small, usually leather pouch or bag, in which one carries small necessities and accessories, such as money, tobacco, etc. By definition, such a small fanny pack is really the ultimate "kukkaro". KEY FEATURES- Capacity approx. 1.5 litres
- 25 mm SR buckle strap (max. circumference approx. 145 cm) attached to stabilizing wingsFlat open pocket on the body side for storing the belt
- Large main compartment with zipper
- One large and two small flat inner compartments
- One large and two small elastic loops for organization on the inside
- Two attachment points on the inside for dummy cords and carabiners
- 18 x 10 cm loop area on the inside for organizers with hooks
- 1 x 2 PALS weaving straps on both side wings
- 1 x 3 PALS weaving tapes at the bottom
- 15 x 5 cm loop surface on the outside for patches and identifiers
- Water drain grommets at the bottom
- All color options offer good NIR performance
- 5-year material and product warranty
- Made in Finland/Estonia
- Weight: 215 g
- Dimensions: 20 x 12 x 5 cm (W x H x D)
- Main fabric: 500D Cordura (100% Polyamide)
- Strap: 100% polyester
-
Specially optimized for women's feet, the ZEPHYR MK2 GTX MID boot is the perfect combination of agility, lightness and stability. It is ideal for special, military, police and all armed forces. The mid-height shaft supports the foot during descents in free-rope and does not restrict movement during close combat. It has Velcro fasteners with a closed structure, which are especially useful for keeping laces in place and not snagging. It's made from a mix of water-repellent, tear-resistant suede and abrasion-resistant, breathable CORDURA® material. With a locking hook, the lacing can be perfectly adjusted at the forefoot and ankle. Lacing technology with two separate lacing zones on the forefoot and upper. This means that the shoe can be adjusted to the anatomy of the foot and laced differently for ascents and descents. Thanks to the waterproof and breathable GORE-TEX Extended Comfort Footwear membrane, this model is ideal for work in temperate or wet areas. The double-layer PU midsole is reinforced with a MONOWRAP® structure, which supports the foot like an exoskeleton. The ZEPHYR MK2 GTX MID is a certified professional boot. Features- Intervention shoe
- Waterproof and breathable properties
- GORE-TEX Extended Comfort waterproof/breathable lining
- Inner protection to prevent premature wear due to descent
- Good heel padding to minimize the impact of the landing
- Closed lace hooks to prevent accidental snagging during airborne activities
- 2 separate lacing zones on the forefoot and upper
- Comfort insole
- Midsole with LOWA MONOWRAP® structure to support the foot
- Slip-resistant "Lowa® X-Trac Military" outsole
- Optimal grip on smooth, wet and greasy surfaces.
- Non-slip, resistant to oil, gasoline and contact heat.
- The outsole is also antistatic and has a heat- and cold-insulating sole.
- Women's Size: UK 3 - 6.5
- Shaft Height: Medium
- Weight/pair (UK size 5) : 970 g
- Color : Drak Brown (493)
- Work shoe certified according to DIN EN ISO 20347:2012 / Code: O2 HI CI WR HRO FO SRC
- Direct injection molding of the sole
- Polyurethane foam
- Double-layer midsole injected directly into the shoe
- Midsole: 100% polyurethane (PU)
- Outsole: Special rubber compound
- Insole: approx. 9% polyamide / approx. 90% polyurethane (PU)
- Outer material: 80% suede leather, 20% textile
- Lining: 100% GORE-TEX Extended Comfort Footwear
-
The development of our new synthetic and lightweight combat glove is based on the key features of the Target Light Duty gloves, which offer maximum dexterity and wearing comfort, allow perfect control of weapons and are enhanced with the proven and advanced technology of the D3O® impact protection. The Target Combat is an extremely finger-sensitive and slim fit tactical glove that is equipped with the MoG/AX ® DexSuede and D3O ® impact technology. Main features :- Palm made of DexSuede - a very thin synthetic suede that offers maximum dexterity and dexterity.
- DexSuede also protects the user from 100-degree contact heat for 10 seconds.
- The fingertip stitched slim finger construction provides extremely high dexterity for perfect weapon handling, control of radios and delicate equipment
- Reinforcements on the trigger guard for more durability, dexterity and wearing comfort.
- 2 flexjoints on the index finger for maximum flexibility when handling weapons
- C-Grip construction improves the durability of your glove and protects the index finger from burns from the hot barrel of your gun.
- Thumb construction for reloading - reinforced thumb piece and specific design for perfect reloading of magazines.
- Reinforced patch on the heel provides extra strength against friction during use.
- Back hand made of 4-way stretch, durable, breathable and quick-drying fabric.
- D3O® knuckle protector with impact protection level 1 - covered with a double layer of Cordura® stretch for durability and abrasion resistance.
- Comfortable neoprene cuff with cut-out for watches - fits very well on the wrist for maximum freedom of movement at any time
- High-quality Velcro closure for adjustable fit covered with TPR, double stitched, prevents dust or sand traps
- Thumb, index finger and middle finger are touchscreen compatible thanks to the conductive suede patches
- Mixed silicone print for excellent grip on weapons, ropes, etc., but also on textiles, sweaty skin, ...
- Black
- Coyote Brown
- Wolf Grey
-
UTA is our patented quick refill solution (U.S. Patent No. 8,430,134 B2) that allows you to refill your water bottle while you're on the go. The reservoir of your water bladder is filled directly via the Source UTA adapter and the hose, so you don't have to open your water bladder or even take it off your back to refill it. Whether you have a military hydration bottle or a regular hydration bottle, Source UTA supports you and lets you fill your hydration bottle on the go, so you can drink hands-free again. Features of the UTA Hydration System Accessory- Easy to connect to the hose of your drinking bladder via Quick Connector
- Fits most bottles and taps
- Filling time from a 1.5L bottle: approx. 50 seconds
- Filling time from tap: 2L in 45 sec, 3L in 1 min 05 sec
- UTA turns off when the reservoir is full and automatically disconnects if the reservoir is accidentally overfilled
-
Clip-style sling attachment point for 1-1/4" webbing that provides weapon quick-release capabilities in an emergency. The Cross-Bolt Lock Bar allows the user to optionally lock the lever for added security. Compatible with the ASAP,® RSA®, M-LOK® Paraclip™ Sling Mount, shotgun Forward Sling Mounts and SGA® Receiver Sling Mounts and many other clip-in sling attachment points*. Pair with the MS1® Sling for a dedicated two-point sling, or with the MS1® MS3® Adapter or MS1® MS3® QD Adapter for a two-point to one-point convertible sling. Lightweight yet durable construction with hardened Melonite finished steel and heavy-duty polymer. Made in the US. NSN: MAG541-BLK 1005-01-656-0759 -
Discreet black belt holster for carrying an MK-2 Sabre defense spray. Features- MK-2 size black holster
- Flap with Velcro closure
- Semi-rigid 1680D nylon (ABS)
- Fixed belt clip
- Suitable for belts up to 6 cm high
- Dimensions: 12.7 x 5.7 cm
- Sold empty
-
Not in stock - on order
Please contact us for more information. -
The Professional Short Sleeve T is designed for a superior fit and professional profile while maintaining the wearability and comfort of a traditional t-shirt. Made from 6 oz. Ring-spun cotton for superior breathability and durable resilience, the Professional T offers a no-roll high-density collar for a clean, neat look, a spandex ribbed crew neck for a secure, flexible fit, and our traditional 5.11® pen pockets on the left sleeve. Moisture-wicking action keeps you cool and dry, while our fade, wrinkle, and shrink-resistant fabric treatment keeps you looking your best. A tapered cut and generous length ensure your shirt stays in place all day long, and double-needle tailoring at the shoulder makes for a sturdier garment that can withstand rough use. SPECIFICATIONS:- Traditional comfort, professional performance
- Moisture-wicking technology
- Resistant to fading, shrinking and wrinkling
- No roll collar
- Pen pockets on left sleeve
- Tapered fit
- Generous length
- 6 oz. Ring-spun 100% cotton
- - Double needle finish for durability
- Spandex Ribbed Crew Neck
- Printed label to prevent chafing
- Suitable for embroidery and silk screening
- 100% cotton (203g/m²)
- Color: navy blue (720)
-
Magpul Icon 6-panel structured fit trucker style cap with subtly embroidered Magpul logo on the left side. CHARACTERIZE:- Lightweight and stretchy
- 60% cotton / 40% polyester
- - Mesh back for improved breathability
- Adjustable snap closure
- Magpul logo embroidered on left side
- Min/max size: 6 7/8 -7 5/8
- Colours: grey/black, anthracite grey, olive green
-
The long curved spoon connects the spoon garage on the belt to the backpack. This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. The garage is attached to the combat belt. The outer compartment connects to the backpack. The outer compartment of the double spoon garage 2.0 connects to the backpack with the curved long spoon, which is placed in the adjustable spoon cover. The curved spoon moves with your hips to allow the legs to move freely through the backpack, minimizing energy consumption in your body. -
The webbing sleeve that attaches in the Squeeze vest/plate carrier to connect the long spoon to the spoon garage on the combat belt. Weight:30 g Dimensions: 22 x 5 x 1 cm *Additional equipment for illustrative purposes only. Not included. -
Kenmerken: The I-Bar is mounted where you want to attach your backpack, bag or Specialist backpack small. It can be mounted on any backpack, vest or sternum.How to assemble:
- Thread the strap under the strap on the platform where you want it to be.
- The strap should be laced in the direction the buckle should be pointing when attached.
- Pull the strap through the front hole of the buckle
- Pull the strap through the rear hole of the buckle
- Adjust the length of the belt
- Fasten the Velcro
- Pull the buckle to make sure it's secure
- Attach the other buckles you need
- Attach the bag/backpack etc and make sure the buckles are placed in the correct positions
-
The long spoon that connects the spoon garage on the belt to the spoon sleeve in the pinch vest/plate carrier. *Accessories and images for illustration purposes only. Not included. -
This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. It also has a quick-release buckle so you can quickly shed your backpack if you need to. The garage attaches to the combat belt to connect to the Squeeze plate carrier or vest in the inner pocket. The outer compartment connects to the backpack. The connecting piece is the long spoon or/and the curved long spoon. The long and long curved spoons are not included in the double spoon garage 2.0. *Atmospheric images and additional material for illustrative purposes only. -
The tie-down strap that attaches to our 90-130 liter backpacks and connects the long spoon to the double spoon garage on the combat belt. This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. The outer compartment of the double spoon garage 2.0 connects to the backpack with the curved long spoon, which is placed in the adjustable spoon sleeve. *Atmospheric photos and additional material for illustrative purposes only. Not included in the package. -
For more than a decade, the Merrell® Moab has been chosen by hikers when there is a choice to be made, making it the best-selling hiking shoe in the world. Famous for its out-of-the-box comfort, durability, and versatility, its predecessors have enabled 20 million people to push their outdoor limits. Version 3 features a new, more supportive insole, a softer midsole with more cushioning, a more grippy Vibram® outsole, and partially recycled fabrics.Features
• GORE-TEX® waterproof membrane, unprecedentedly breathable and waterproof • Pigskin and mesh upper • 100% recycled laces and webbing • Water tongue to keep out debris • Protective toe cap • 100% recycled mesh lining • Kinetic Fit™ ADVANCED removable molded insole with reinforced heel cushioning for medium support • Molded nylon arch shaft • Merrell Air Cushion™ in the heel provides shock absorption and stability • The Super Rebound Compound provides durable shock absorption in the heel to help reduce twist of the foot and allow for an effortless transition to the midfoot. • Vibram® TC5+ rubber outsole •980g -
The Merrell Rogue Tactical GTX® shoe features a GORE-TEX® waterproof membrane, which offers exceptional breathable and waterproof performance. Featuring a textile and TPU upper, COMFORTBASE™ footbed that protects your foot for all-day comfort, FloatPro Foam™ midsole for lightweight, long-lasting comfort. On the ground, it has a Vibram® MegaGrip® outsole that is designed to provide excellent grip on wet and dry terrain while maintaining a higher level of durability. Effective comfort that works. Features- Intervention shoe
- MID height (falls around the ankle)
- GORE-TEX® waterproof membrane for exceptional breathability and waterproofing.
- Breathable mesh and TPU upper
- 100% recycled metal hooks, laces and belt loops
- Profiled tongue prevents dirt from entering the shoe
- Protective, abrasion-resistant rubber toe cap
- 100% recycled breathable mesh lining
- 100% recycled mesh footbed
- Cleansport NXT™ treatment for natural odor control
- Removable PU footbed
- Protection against stones
- - FloatPro™ Foam midsole for lightweight, all-day comfort
- Vibram® TC5+ outsole with exceptional traction for outdoor multisport activities, developed exclusively for Merrell.
- Specially designed Vibram® traction points for more grip and to remove waste with every step.
- Cleat height: 28.5-20.5 mm
- Drop: 8 mm
- Cleat: 5 mm
- Weight: 700 g
- Color: Coyote
-
The MoG Fast Rope Tactical gloves have been developed in collaboration with the Instruction Group Rotary Wing (Royal Netherlands Army) and are primarily designed for professional and tactical use during (combat) operations. This 'rope-to-gun' type has a number of distinguishing features compared to the 'standard' Fast Rope glove- The slender cut finger construction allows for extremely high dexterity when handling ropes, but also allows for the manipulation of weapons, radios and other equipment as soon as one touches the glove. It also prevents the risk of twisted fingers.
- The multi-layered but thin layered palm construction with a split leather top layer provides excellent grip, buffers against heat build-up during the high-speed tug-of-war, and provides additional protection against cuts
- Split leather reinforcement layers on the fingers and in the crotch between thumb and index finger
- The glove offers a higher protection against heat accumulation in the palm and fingers and is certified according to the EN 407 standard - Contact heat protection level 2 (only claimed for palm and fingers).
- The conductive leather on the thumb and index finger makes it easy to use touchscreen devices
- Additional stitching lines and cut-outs at strategic points provide more dexterity
- Reinforcement of the critical areas on/between thumb and index finger, for extra protection
- The cut-out in crucial places on the index finger and thumb provides extra flexibility
- The back of the hand is made of 4-way stretch and quick-drying material that provides a breathable and comfortable fit, while the knuckle area is partially covered with neoprene that acts as soft impact protection in the event of accidents
- The short cuff allows for freedom of movement at the wrist and features a sturdy hook-and-loop closure for easy on and off and a snug fit around the wrist
- There is a strong and collapsible loop on the inside of the cuff for easy attachment to a carabiner, belt or plate carrier
-
The Agilite Magnetix™ battle belt is designed to be the best combat belt system on the market, validated downrange in intense combat. Our goal was to eliminate all problems with existing combat belts. One of the biggest problems with combat belts is that it is difficult to align the upper and lower belts, especially under pressure. It can take multiple attempts to get a correct and comfortable fit, wasting valuable time. The Magnetix Battle Belt uses a patent-pending magnetic alignment system to ensure a perfect fit every time. Another big problem with combat belts is that you don't have a MOLLE right where you need it most, close to the buckle. The Magnetix™ Battle Belt has a full field from MOLLE to the buckle, regardless of your size. Many other combat belts sag, especially at the front of the belt. The unique design of the Magnetix™ Battle Belt ensures that the belt does not sag, even under heavy loads. One of the biggest problems with 2-piece combat belts is that the inner belt is always an afterthought. The Magnetix™ inner belt is designed to be the best inner belt on the market, to solve additional problems and to be a great everyday belt in its own right. The inner strap is optimized for CCW with a unique smart stiffening system that ensures the belt does not bend or wobble while carrying a firearm, but still bends when needed, for ultimate comfort. Many stiffened belts can be too stiff and uncomfortable. The Magnetix™ inner strap uses a range of composite materials that mold to your exact body shape over time. Most two-piece Battle Belt systems use safety buckles, but these are attached to materials with no safety rating or constructed in such a way that the belt is not given a safety rating. This means that the strap can never be safely used to be attached to an airframe. The Magnetix™ Battle Belt system is constructed to be fully ratification capable, and a classified version is available upon request. Every detail of the Magnetix™ Battle Belt system is designed to deliver two belts that give you an unparalleled advantage, whether you're defending your country at the tip of the spear, defending your community, or defending your home. Size chart
Specifications
- Magnetic alignment system for inner and outer belts
- 1000D CORDURA® Mil-Spec Tactical Nylon
- CURV® thermoplastic composite material
- Laser cut Squadron™ laminate
- COBRA® quick release buckle with D-ring
- Proven in battle in Israel
- 2 Harness system
- Tubular webbing
- 2 Inch Outer Strap
- 1.75 inch inner strap
- Full field from MOLLE to the buckle, no matter your size
- Fully customisable
- Molds to your exact body shape - Nominal version available upon request
- Magnetic alignment system for inner and outer belts
-
The Condor Core Vest is designed for everyday use to keep your vital areas warm during cooler weather conditions and colder seasons. The microfleece-lined interior provides warm, active comfort. The lower-cut armholes are designed to give the user more mobility and ventilation unlike the SUMMIT or PHANTOM vests. The Core vest is great for outdoors with its breathable foil membrane and Teflon coating. It's made of 4-way stretch high-density fabric to block the wind and is equipped with zippered inner and outer pockets to carry essential items. Attributes- Two hand pockets
- One chest pocket
- One Inner chest pocket
- Drawstring waistband
- Full front YKK center zipper with dual sliders
- Micro-Fleece lined interior
- Imported
- Shell: 100% Polyester, 4-Way High Density Stretch Fabric
- Mid layer: Breathable film membrane
- Inner layer: 150 g/m, 100% Polyester Fleece
-
The Condor Pursuit Pack is designed to be a multi-purpose backpack with hidden aesthetics and operational features. It offers the widest possible customization options for tactical EDC and EMT layouts. ** 2 pistol magazines and pistol holster in the photo are NOT included- Clam-shell design for easy access
- First-of-its-kind sliding handle
- Configurable padded shoulder straps
- Air-flow back panel improves ventilation
- Front zippered pocket
- Removable backpack straps
- Main compartment with loop lining
- Trolly handle pass-through
- Removable sternum strap
- Volume: 1343 Cu In // 22L
- Overall size: 19"H x 12"W x 6.5"D
- Imported
-
Not in stock - on order
With sneaker-light comfort and hiker-like durability, the Nova 3 Tactical is the perfect waterproof boot for outdoor work. Built with recycled features like the breathable mesh lining and footbed padding and provides all-day comfort through our COMFORTBASE™ footbed. Be prepared for whatever the day throws at you.- Waterproof membrane seals out water and allows moisture to escape
- Non-wicking mesh and TPU upper
- Bellows tongue keeps debris out
- 100% recycled breathable mesh lining
- 100% recycled mesh footbed cover
- NXT padded footbed cover to prevent odor
- COMFORTBASE™ removable contoured footbed cradles your foot comfortably all day long
- Rock plate for protection
- Merrell Air Cushion in the heel absorbs shock and adds stability
- Lightweight EVA foam midsole for stability and comfort
- Vibram® TC5+ outsole technology gives you confidence with every step, from mountain trails to city streets.
- Created exclusively for Merrell, the Vibram® TC5+ outsole provides grip, traction and durability designed for everyday wear.
-
The CONDOR LCS Vector Gun belt is the latest addition to our family of load-bearing belts. With the first-of-its-kind magnetic buckle, the Vector is ideal for fast-paced, kinectic operations where every second counts. This durable belt is made from heavy-duty webbing and reinforced with an extra layer of scuba webbing to handle heavy loads. It helps distribute weight comfortably and keeps firearms and ammunition within reach. It's available in a number of classic colors to complement your uniform or gear and ensure discretion when needed. The exterior of the turret belt is made of our LCS material with non-traditional MOLLE slots to stabilize mounts and reduce weight. This versatile belt can be used in conjunction with an inner belt or as a standalone belt to meet your needs for any expedition or mission. It is equipped with a removable non-slip cushion on the inside so that it stays comfortably around your waist. Like the Condor LCS Cobra Gun Belt, this belt has a two-inch-wide webbing. Features- 2-inch wide strap
- 2-inch self-aligning magnetic buckle with side release
- Reinforced with scuba tape
- Laser-cut slots for modular accessories
- Removable anti-slip pad
- Can be used as a stand-alone duty belt or in combination with the hook inner belt as a two strap system
- Patent pending
- Imported
- X-Small/Small: 28.5" - 32.5" Belt Length, Waist 26"-28"
- Small/Medium: 34.5" - 38.5" Belt Length, Waist 30"-32"
- Medium/Large: 40.5" - 44.5" Belt Length, Waist 34"-36"
- Large/X-Large: 46.5"-50.5" Belt Length, Waist 38"-40"
- X-Large/XX-Large: 52.5" - 56.5" Belt Length, Waist 42"-44"
-
This kit includes everything you need to make all kinds of elastic cord things like zigzag attachment things for backpacks etc. KEY FEATURES- 400 cm elastic cord
- 4 strong drawstring closures
- Think, cut, burn, baste, and you're done
- 2-year material and product warranty
- Made in Finland/Estonia
- Weight: 45 g
- Dimensions: 11 x 15 x 2 cm (W x L x D) (in packaging)
- Elastic cord: polyester/rubber
- Drawstring closures: polyamide
- An elastic zigzag or similar attachment thing on the outside of a backpack.
- And probably a lot of other things.
- Most people will probably use these for all kinds of attachment things. The included 400cm cord and four drawstring closures should be enough for a pair or even four of these things, depending on the size and design of the thingy.
-
While natural foliage is the ultimate helmet camouflage, a bushy cover with a 3D effect might be the next best thing. Quick and easy to use, easy to customize. They effectively break up helmet silhouettes and provide quick camouflage adjustment to suit different environments. The design is very simple, a single flat piece of 500D Cordura with alternating zigzag shapes cut into it. The zigzag pattern is positioned in such a way that it creates an opening for NVG mounts on the front. Small slits have been cut around the edges for the elastic cord. Thread the elastic cord through the slits, tie it at the back, and pull it over your helmet like a shower cap. Finish it off by pulling back any excess material and rolling it underneath yourself to tighten the cover. If you want to adjust the fit, you can play around with threading the elastic cord through the slits and zigzag pattern in different ways. And if you get really wild and feel the need: you can even cut off excess material from the cover, but of course, such huge adjustments are at your own risk. KEY FEATURES- 3D Effect Camouflage Plate for Helmets
- One-size-fits-most, best suited for high-cut L and XL helmets
- Lightweight Laser Cut 500D Cordura
- Quick and easy to apply and remove
- All color options offer good NIR performance
- 2-year material and product warranty
- Gemaakt in Finland
- Weight (in retail container): 65 g
- Dimensions (in retail packaging): 10 x 15 x 4 cm (W x L x D)
- Fabric: 500D Cordura (100% polyamide)
-
Two different mechanisms for attaching paper to our sleeves. Both have Velcro at the back. FBM-10B= Is an international 2-hole mechanism. 85 mm between the rings and the rings have a diameter of 40 mm. 50-00019-01-000= Is a Swedish standard mechanism with 4 holes. Color: Olive -
Attach the pouches to the Velcro panel or in the organized bag 4 color-coded zippered pouches to keep medical or technical equipment organized. Small bags: 18x16x7 cm and large bags: 32x15x7 cm 7 cm high sides Velcro on the back to attach the pockets to the Velcro panel in the Specialist backpack small Color-coded to make it easier to find what you're looking for Fits: Anything – medical equipment, technical equipment, or personal items Beware: In the backpack, specialist, small *Content for illustrative purposes only. -
Not in stock - on order
The perfect pouch to quickly put your empty magazines in during a firefight. Also useful for storing gloves, hearing protection, etc. Use it to put evidence or other important things in during a raid Basically, the pouch is designed to temporarily carry things you don't want in your hands Is worn rolled up in the bottom of the vest Pull the large D-ring when needed The drawstring with drawstring closure at the top can be tightened to tighten the opening of the pouch Capacity: 10L Suitable for: 8-10 x 5.56 magazines, earmuffs, gloves etc. Beware: Equipment vest, belt etc. -
Soft polymer magazine holder with MOLLE attachment for a 5.56 magazine. Can be attached to a belt or to the MOLLE loops on a patrol vest or combat bag. The holder can be attached both up and down. Compatible with FAMAS, HK416 and AR15 magazines. -
Seamless Lasting ABEL men's T-shirt with short sleeves, anatomical cut and excellent functional properties. The Siltex material contains silver ions that make the T-shirt very antibacterial. The snug fit supports functionality. The T-shirt is also comfortable and functional due to the minimal number of seams. Dry and warm, no matter how strenuous the activity. Material: 180g Light Seamless Type: Short sleeve Gender: Men Season: all year round Seamless clothing Seamless underwear is form-fitting, with zones for ventilation and faster sweat evaporation in places where one sweats more. In the construction of these garments, knowledge in the field of functionality and comfort of textiles was used. Seamless does not shrink and when using elastane it perfectly embraces the body as a "second skin". Functional underwear includes a minimal number of seams that do not cause abrasion of sensitive areas, helping to maintain shape. -
The Explorer Cases 2209.BE is a black transport case with inner dimensions of 220 x 160 x 95 mm. The case is indestructible, 100% waterproof and provides complete protection for all your fragile and valuable belongings. The case is fully certified and can therefore withstand the harshest conditions and shocks. Is there something wrong with your suitcase? Then you can rely on a lifetime warranty! . By means of optionally available accessories, you can also equip this Explorer Case with, for example, picking foam, a combination lock or shoulder kit. - Explorer Cases article: 2209.BE -Model: Empty - Color: Black Application Explorer Cases 2209.BE The transport case is an extremely suitable tool for the safe transport of smaller electronics such as a DSLR, smartphone, but also for camera lenses, for example. Due to its compact size and light weight, you can safely take the case - with its contents - with you wherever you go. In addition, the 2209 is allowed as carry-on luggage on the plane. The Explorer Case 2209 is also available in orange and green. Do you want this case in that other color, or have you seen another Explorer Case that you can't find with us? Please contact us. Why Explorer Cases Italia? • Lifetime warranty • 100% waterproof, moisture-proof and dustproof • Resistant to chemicals by means of demonstrable certificates • Resistant to hard impacts • Effortless to use at temperatures from -33 to + 90 C° • Allowed as carry-on baggage on the plane • 100% Made in Italy SpecificationsBrand: 
Explorer Cases Certificates: IP67, STANAG 4280 (ed. 2), DEF STAN 81-41 (lev. J) Extra options: Compatible with Combination Lock, Suitable for Air Freight Suitable for: Compact Cameras, DSLR, Smaller Electronics, Lenses, Outdoor Explorer Cases Series: 2209 / 2214 Weight empty: 0.88 kg Buoyancy: 2.3 kg -
The Explorer Cases 2209.B is a black transport case with picking foam padding and has inner dimensions of 220 x 160 x 94 mm. The case is indestructible, 100% waterproof and provides complete protection for all your fragile and valuable belongings. Explorer Cases are fully certified and therefore resistant to the harshest conditions and shocks. Is there something wrong with your suitcase? Then you can rely on a lifetime warranty! The case contains a picking foam set, consisting of removable layers of foam. By means of optionally available accessories, you can also equip this Explorer Case with, for example, a combination lock or shoulder kit. - Explorer Cases article: 2209.B - Model: Equipped with picking foam - Color: Black Application Explorer Cases 2209.B The transport case is an ideal tool for safely transporting smaller electronics such as a DSLR or smartphone, but also for all kinds of accessories that you use during outdoor activities, for example. Due to its compact size and light weight, you can safely take the case - with its contents - with you wherever you go. In addition, the 2209 is allowed as carry-on luggage on the plane. The Explorer Case 2209 is also available in orange and green. Do you want this case in that other color, or have you seen another Explorer Case that you can't find with us? Please contact us. Why Explorer Cases Italia? • Lifetime warranty • 100% waterproof, moisture-proof and dustproof • Resistant to chemicals by means of demonstrable certificates • Resistant to hard impacts • Effortless to use at temperatures from -33 to + 90 C° • Allowed as carry-on baggage on the plane • 100% Made in Italy SpecificationsArticle number: 250150 Brand: Explorer Cases Inner dimensions in mm: 220 x 160 x 95mm Outer dimensions in mm: 246 x 215 x 112mm Height of lid: 20 mm Height of bottom: 75 mm Volume in litres: 3,3 Certificates: IP67, STANAG 4280 (ed. 2), DEF STAN 81-41 (lev. J) Extra options: Equipped with Picking Foam, Compatible with Combination Lock, Suitable for Air Freight Suitable for: Compact Cameras, DSLR, Smaller Electronics, Lenses, Outdoor Explorer Cases Series: 2209 / 2214 Weight empty: 0.88 kg Weight with foam: 0.99 kg Buoyancy: 2.3 kg -
The Gripper Slip-On Grip from Pachmayr has a unique design and contour, allowing it to fit a wide range of popular medium to large pistols. The Gripper Slip-On has an attractive non-slip texture and palm bulges for better fit and control. The contoured cutting lines allow you to adjust the grip to fit your gun. Perfect for Glock and other polymer frame pistols. Caution: Do not use on handguns with a safety catch.- Optimal size for a wide variety of pistols.
- Can be cut to size and has contoured cutting lines for a clean, even cut.
- Comfortable finger grooves provide better control.
- The back of the finger grooves is recessed so that they can be used on pistols with or without finger grooves.
- Non-slip texture and bulges in the palm for perfect fit and control.
- The Gripper is made of abrasion-resistant rubber and is insensitive to weather, sweat, oil and solvents.
- Perfect for Glock and other polymer frame pistols.
- Glock 19, 23, 25, 32, 38, and 17, 20, 21, 22, 31, 34, 35, 37
- S&W M&P Full Size & Compact, M&P M2.0 Full Size & Compact
- S&W Sigma, SD, SD VE
- Sig 226, 228, 229, P320 Full & Compact Ruger SR9, 22/45
- Beretta 92, 96
- CZ 75, P-07
- Walther P99
- Hi Point 380/9mm/40/45 Browning Hi-Power H&K USP
-
This duty holster is designed for the Glock 17 Generation V. It is made of Level 5 injection molded polymer. It is specifically designed for law enforcement officers to wear with their duty uniform. It is equipped with 5 safety latches, making it extremely safe for officers. The weapon is easy to draw and safely holster. The internal retention of the weapon is removed by simply pressing the release pedal with the thumb when you grip the grip (Evolock system). The same pressure on the release pedal automatically tilts the sling forward (Rotoloop system). This holding mechanism automatically snaps back into place when the weapon is encased under its own weight. The sling bar can be manually brought back to the top of the weapon by pulling it with your strong hand. It is equipped with an anti-retraction tab at the front (Roto Guard system). A screw controls the retention force of the weapon, while a 2nd screw adjusts the height of the trigger guard. (STR system). A casing reinforces the contour of the base of the trigger guard to prevent unintended pressure on the magazine printer. A backplate to isolate the weapon's release button (BS-PRO system). It is equipped with 3 screws in a 120° triangle and allows the holster to be rotated on different MULTILINK II version RADAR supports (Low, High, Medium offset, Thigh plate, Multi-brand adapter and Soft Passing Claw). It is available in a right- and left-handed version and is black in color. It can be worn on the belt, but also on the thigh plate and the Molle system. It comes with a 3x120° S-Closer belt offset (RAD-6500-6106). Features- 5 retention levels
- Evolock-S & Rotoloop-S 2-grease automatic safety devices
- STR System Screw Fixing
- BS-pro skid plate
- Protective plate for push-button charger
- Roto Guard anti-pull tab at the front
- LTILINK 2 port system for optional accessories
- Available in right- or left-handed version
- Color: black (059)
- Made of injection-molded polymer
- Includes S-clamp 3x120° (6500-6106)
- Glock 17 Gen 5
- RADAR support
- RDC Disc Fuselage RAD-6502-0017
- SFL fork RAD-6505-0026
- RSS fork RAD-6507-0017
- UBM lower belt offset RAD-6500-6506
- Lower belt offset RAD-6500-6306
- Medium Belt Loop RAD-6500-0956
- Combined T-System Paddle RAD-6500-0046
- Rigid Claw Soft Loop RAD-6500-1187
- Rigid Soft Double Loop RAD-6500-1197
- And RADAR adapter for police and Blackhawk thigh plates
-
Protect your mission-critical communication and navigation devices, the DarkVault™ Comms case protects the gear you rely on to accomplish the mission. The DarkVault™ Critical Gear Case is designed to provide a professional level of protection while providing immediate access to navigation and communication tasks. DarkVault Comms provide excellent physical protection, but enable electromagnetic communication (i.e., they are not they are not blocking). Features- Rigid protection for sensitive equipment
- COMMS version (non-blocking, lets waves through)
- Enables quick access to equipment
- Waterproof seal that prevents water, dust and dirt from entering
- MOLLE quick coupler system for external and internal mounting options
- Adjustable friction hinge for navigation and communication tasks
- Belt or lock holes for padlocks and manipulation devices to prevent access to the interior.
- internal parts and to attach the case to the MOLLE
- Internal and external Velcro® panels for identification and organization
- Made of durable premium polymer
- May also include small survival equipment such as matches, hooks and lines etc.
- External dimensions: 18.28 x 13.79 x 4.24 cm
- Internal dimensions: 17.01 x 10.03 x 2.92 cm
- Empty weight: 276 g
- Designed and manufactured in the USA.
-
Protect your mission-critical communication and navigation devices, the DarkVault™ Comms case protects the gear you rely on to accomplish the mission. The DarkVault™ Critical Gear Case is designed to provide a professional level of protection while providing immediate access to navigation and communication tasks. DarkVault Comms provide excellent physical protection, but enable electromagnetic communication (i.e., they are not they are not blocking). Features- Rigid protection for sensitive equipment
- COMMS version (non-blocking, lets waves through)
- Enables quick access to equipment
- Waterproof seal that prevents water, dust and dirt from entering
- MOLLE quick coupler system for external and internal mounting options
- Adjustable friction hinge for navigation and communication tasks
- Belt or lock holes for padlocks and manipulation devices to prevent access to the interior.
- internal parts and to attach the case to the MOLLE
- Internal and external Velcro® panels for identification and organization
- Made of durable premium polymer
- May also include small survival equipment such as matches, hooks and lines etc.
- External dimensions: 18.28 x 13.79 x 4.24 cm
- Internal dimensions: 17.01 x 10.03 x 2.92 cm
- Empty weight: 276 g
- Designed and manufactured in the USA.
-
The ESS InfluxTM military goggle virtually eliminates lens fogging and thus ensures that troops remain fully aware of their situation in dynamic tactical environments. As part of the goggle's patented AdjustableVentilation SystemTM (AVSTM), the Influx RotoClipTM silently rotates the position of the lens in the frame of the goggle: choose between a dust-free, fully sealed mode or a fog-free, open-ventilation mode. With InfluxTM, troops can always see clearly and act quickly when seconds count. The RotoClipTM not only controls the AVSTM, but also enables one of the fastest lens change systems ever used in a pair of glasses. Operators can quickly and easily switch between different lens tints, allowing them to adapt more quickly to the environment and reduce the amount of time they need to work. Combined with a host of other major improvements, the InfluxTM is ready to break through the fog of war and clear the way to victory. Specifications- Patented Adjustable Ventilation SystemTM (AVSTM) provides
- Unrivalled anti-fog ventilation & full perimeter dust filtration
- Low profile, suitable for night vision with wide field of view
- Anti-microbial OpFoamTM face padding increases comfort and fit
- Advanced ESS ClearZoneTM FlowCoat lenses prevent fog on the inside and prevent scratches on the outside
- Quick-release strap twists for optimal helmet compatibility
- Interchangeable 3.0mm High Impact Polycarbonate Lenses
- Distortion-free optics & 100% UVA/UVB protection
-
These Breakthrough Clean Technologies® woven 100% Cotton Knit Patches are ultra-absorbent and effectively clean your firearms. These pre-cut patches are easy to use and available in a wide range of calibers to meet all your weapon maintenance needs.- Product length 0.75
- Product Width 0.75
- Product height 0.125
-
These Breakthrough Clean Technologies® woven 100% Cotton Knit Patches are ultra-absorbent and effectively clean your firearms. These pre-cut patches are easy to use and available in a wide range of calibers to meet all your weapon maintenance needs.- Ideal for running from .45 to .58 Cal
- 100% cotton, ultra-absorbent patches
- 540 cotton plasters measuring 6.3 x 6.3 cm (2-1/2" x 2-1/2")
-
BEST OPTICS CARE FOR HUNTING AND SPORTS The Fluna optical care set contains three coordinated products for residue-free cleaning, long-lasting protection and effective anti-fog coating. Prepare your high-quality optics optimally for sport and hunting and benefit from crystal-clear visibility in all temperatures and weather conditions. A clear, unobstructed view is an essential prerequisite for achieving the desired results in sports and hunting. Nothing is more annoying than a lens with streaks or fogged up that makes precise aiming practically impossible. With the Fluna optics maintenance set, you can ensure that your optics optimally support your ambitions at all times and under all conceivable external circumstances in just three simple and quick steps. 1 / FLUNA TFT OPTICS CLEANER With this special foam, which comes in a handy spray can, you can clean all types of optics, binoculars, riflescopes and spotting scopes. You can also clean flat screens such as navigation systems or hunting and sports cameras in no time. The alcohol-free optics cleaner does not penetrate the housing and is easy to use with a clean, dry cloth. 2 / FLUNA ISOPROPANOL With this product in the practical pump bottle, you can degrease all glass surfaces that you then want to treat with Fluna Anti-Fog. The anti-fog coating is especially popular in yacht optics, as it is exposed to different temperatures and weather conditions. Simply spray on, leave on for a few minutes and polish with a clean cloth (included in the kit). 3 / FLUNA ANTI-FOG The third product in the Fluna optical care set is an effective and durable solvent-based coating that is suitable for all types of glass - and in particular for hunting optics. With just a few sprays from the bottle onto the optics prepared with Fluna Isopropanol, a short exposure time and then polishing, you can apply an anti-fog coating whose effect lasts from a few days to weeks. 4 / LINT-FREE MICROFIBER CLOTH The microfiber cloth with a size of 40 x 40 centimeters is the best choice for cleaning your optics. Make sure it is always clean and dry during use for optimal results. After use, wash the microfibre cloth in the washing machine at 60 °C without fabric softener. 5 / EYEGLASS CLEANING CLOTH - POLISHING CLOTH To polish the lenses, it is best to use the lens polishing cloth from the Fluna Optik care set. Make sure it's clean and dry when you use it – this is the only way to ensure that the glasses are truly streak-free and one hundred percent clean. You can also use this special lens polishing cloth to polish the anti-fog coating for hunting optics. PISTOL MAINTENANCE WITH THE FLUNA TEC RANGE Cleaning, gun maintenance and the associated optical care should ideally be as simple as possible and require only a minimum of time. With Fluna Tec's cleaning and weapon care products, you choose products that are perfectly matched to each other and easy to use. Do as the pros in sport and hunting do and buy your Fluna optical care kit. -
HICO 4" has a heavy-duty elastic shell that provides very good compression during application, even with one hand. No pliers are needed, just bandage the bandage in an "X" shape, once slightly above and once slightly below. This dynamic elastic bandage has silicone strips for optimal support even in difficult places (head, shoulders). At the end of the bandage, as with all military bandages, you will find a very strong plastic safety clip to hang the bandage. The sealed packaging is easy to tear with one hand or your teeth (if you only have one hand). CHARACTERIZE:- Dimensions: 10 x 10 x 1.5 cm
- Bandage: 10 x 81 cm stretched
- Weight: 29 g
- Sterile absorbent compress - Standard NATO size (10 x 15 cm)
- STERILE - Vacuum packed
-
Not in stock - on order
The Lowa Zephyr MK2 GTX HI is a mission boot with the ideal balance of maneuverability, lightness and stability. The HI-CUT upper provides the support needed during skydiving and fast roping. The upper is made of a combination of water-repellent, tear-resistant suede and abrasion-resistant, breathable CORDURA® material. An innovative locking hook makes it possible to adjust the laces individually at the forefoot and ankle. The waterproof, highly breathable GORE-TEX Extended Comfort laminate is ideal for use in temperate or relatively wet environments. The double-layer PU midsole with a MONOWRAP® frame surrounds and supports the foot like an exoskeleton. The ZEPHYR MK2 GTX HI is certified as a work footwear according to EN ISO 20347:2012. It is antistatic and has a cold and heat-insulating sole. The outsole is not only non-slip - it is also resistant to oil, gasoline and contact heat. GUARANTEED PROTECTION AGAINST THE WEATHER - EVEN IN HOT TEMPERATURES. GORE-TEX Extended Comfort Footwear Guaranteed protection against the weather, even in hot temperatures: The ZEPHYR MK2 GTX HI is equipped with a GORE-TEX Extended Comfort footwear membrane. The innovative technology offers optimal waterproof protection and breathability. Permanently waterproof The membrane provides reliable waterproof protection. No matter what kind of activity you're planning, you can count on GORE-TEX technology to keep your feet pleasantly dry. High breathability GORE-TEX shoes are designed with optimal breathability in mind and are a joy to wear even in intense activities and hot weather. Water cannot enter the shoe, and moisture produced in the shoe escapes through billions of pores in the GORE-TEX membrane. Windproof The GORE-TEX membrane reliably repels wind and weather. This allows you to go on the road, regardless of the weather. LACING WITH TWO ZONES, SO THE SHOES FIT WELL Thanks to the two-zone lacing system used in the ZEPHYR MK2 GTX HI, the forefoot and upper have their own separately adjustable lacing zones. This allows the shoe to be individually adapted to the anatomy of the foot and strung in different ways for climbs and descents. DOUBLE INJECTION, UPPER AND SOLE BECOME A FIXED UNIT For effective cushioning and increased comfort, the sole of the ZEPHYR MK2 GTX HI is attached to the upper in a technically demanding injection process. The upper is placed in a specially designed mold. Then several layers of PU foam are poured into it. During this process, the sole and upper material are fastened together. Lightweight For this process, a plastic called polyurethane is used. It is a very light foam filling. Damping The plastic polyurethane is a foam filling with very good damping properties. The plastic retains its shape and bounces back to its original state, even when the millions of small bubbles are often pressed together. This, in turn, creates a good rebound effect. A wide range of design options Thanks to direct injection, the sole can be designed in a very large number of ways. Due to the versatile properties of the materials used, the shoes can be effective in a large number of areas. STABLE FRAME With the LOWA-MONOWRAP® frame, the midsole of the ZEPHYR MK2 GTX HI offers the very best comfort. This three-dimensional design of the midsole was developed by LOWA in 1995. The frame cradles the foot comfortably and supports it when the wearer of the shoe ventures over uneven surfaces. The sole design is slightly raised for shoes with a STABILITY FRAME. Good conductivity of the foot The foot fits optimally in the shoe thanks to the three-dimensional design of the frame. Increased comfort The special design of the midsole ensures that the foot fits well in the shoe. The foot is pleasantly cradled by the three-dimensional frame. Lightweight The LOWA-MONOWRAP® is made of a plastic called polyurethane. It is a very light material.
