-
Our Laser Cut Compact Dump Pouch can be attached to the belt or to any Warrior Series carrier. Made from a combination of Mil-Spec elastic and nylon for an ultra-compact design. To open, simply release the outer Hypalon safety tab, then pull the inner tab to fully open the bag. To repack, place the bag section back into the pocket and reattach the safety tab. This is attached with 2 MOLLE arms. Made from our high-quality composite laminate material and fabricated using our advanced laser cutting machines. Dimensions & Weight Length: 13 cm Width: 8.5 cm Height: 4 cm Weight: 0.083 kg -
The Pentagon Renegade Tropic is a comfortable, lightweight pant made of elastic 4-way stretch material with a water-repellent finish and reinforcements in the knee and ankle area. Thanks to the elastic 4-way stretch material, the pants dynamically adapt to every movement and do not pinch. The Renegade Tropic is lightweight and easy to carry, even in warmer temperatures. Details:- Elastic 4-way stretch material.
- DWR impregnation (durable water repellent).
- Triple-stitched stress points.
- YKK® main zipper, jeans button and extra safety button.
- 7 belt loops (50 mm).
- 2 key loops, suitable for D-ring/carabiner.
- Contoured and reinforced knee area.
- Slot for knee pads (optional).
- Strengthens ankle area.
- Adjustable leg cuffs with elastic drawstring.
- 2 side pockets with reinforcements.
- 2 slit pockets at the back.
- 2 flat thigh pockets with zipper.
- 1 thigh pocket with slit.
- Breathability: 3,000 g/m²/24h.
-
The Pentagon Renegade Tropic is a comfortable, lightweight pant made of elastic 4-way stretch material with a water-repellent finish and reinforcements in the knee and ankle area. Thanks to the elastic 4-way stretch material, the pants dynamically adapt to every movement and do not pinch. The Renegade Tropic is lightweight and easy to carry, even in warmer temperatures. Details:- Elastic 4-way stretch material.
- DWR impregnation (durable water repellent).
- Triple-stitched stress points.
- YKK® main zipper, jeans button and extra safety button.
- 7 belt loops (50 mm).
- 2 key loops, suitable for D-ring/carabiner.
- Contoured and reinforced knee area.
- Slot for knee pads (optional).
- Strengthens ankle area.
- Adjustable leg cuffs with elastic drawstring.
- 2 side pockets with reinforcements.
- 2 slit pockets at the back.
- 2 flat thigh pockets with zipper.
- 1 thigh pocket with slit.
- Breathability: 3,000 g/m²/24h.
-
Pentagon Tactical Baseball Cap with Velcro panels for friend and foe identification on the front, back and on the cap. Six-panel cap designed for tactical use. The fixed visor offers good protection from the sun and the cap is adjustable at the back with a Velcro closure. Specifications- 65% Polyester 35% Cotton
- 215 grams rip-stop fabric
- 6-panel design
- Stiffening plate at the bottom
- IR Hook n Loop patch on top
- Flag/team or morale patch on front and back
- Size adjustable strap
- One size fits all
-
Not in stock - on order
The universal Picatinny MagRail attaches to the bottom of your magazine plate so that you can attach the MantisX (not included) to your weapon if it doesn't have an existing rail. Recommended if you don't have a compatible holster and want to train with one. Features- Small Picatinny rail for all types of flat bottom warehouses
- Requires flat magazine plate to stick high-strength VHB adhesive tape (included)
- Tape is highly resistant to live fire conditions
- Can be removed and reapplied by applying pressure and allowing to dry for at least 20 minutes before use
-
Large, multifunctional waist bag suitable for various specialized activities and tasks. Versatile internal organization and numerous external attachment points. Quickly attaches to backpacks in a variety of ways, allowing you to use the Askare as part of a modular, scalable backpack system. "Askare" is Finnish for "task" or "chore", it's as simple as that. This backpack was originally designed for sniper teams to carry various shooter/spotter-related gear, but has proven to be a great asset for all kinds of tasks both inside and outside of military origins during development. The large seven-litre capacity plus numerous external mounting options make this a very versatile general-purpose bag. On the inside, the bag has a number of options for organizing your belongings: elastic webbing loops of different sizes, flat pockets, attachment loops, and a loop surface for attaching organizers with hooks. On the back wall, two rows of 50 mm elastic webbing are sewn, forming loops of different sizes. The bottom row is sewn in two large, approx. 17 cm wide loops (designed for .50 cal Barrett magazines). The top row is sewn in three smaller, approx. 12 cm wide loops (designed for HK417 magazines). Each end of the bag has an elastic loop for smaller items. The front wall has two flat compartments with attachment loops at the top. A loop area of 35 x 10 cm on the inside of the front makes it possible to attach all kinds of organizers with hooks, etc. A large, open compartment on the back of the backpack has a removable closed cell foam pad on the inside and allows you to store the waist belt if needed. This open compartment can also be used as a huge belt loop if you want to carry the Askare on a belt or the waist belt of a backpack. The PALS webbing on the sides allows you to attach small pockets and accessories to the outside of the backpack. The horizontal webbing on the front of the backpack can be used to attach small pouches such as our Multitool pouch, Tourniquet pouch and Zipped GP pouch 2x2, or elastic drawstring loops. The many loops on the sides of the backpack can be used to attach elastic cord to carry all kinds of items on the bottom and front of the bag, turnstiles, ponchos, tarps, whatever. WEARING OPTIONS Due to its large size, the Askare carries the best on your lower back, rotate it forward for easy access. The strap is also long enough to carry the bag on your back like a sling pack. The strap is attached to large triangular wings for stability. For longer backpack movements, you can quickly attach the Askare to the compression straps on the side of your backpack. To do this, you'll need to add suitable buckles (2M PALS mount or split-bar female buckles) or use G-hooks. No quick-release buckles are included with the bag. You can also quickly attach the Askare to the side of your backpack by threading the compression straps on the side of the backpack through the large belt loops on the front of the bag. The strap can be stored in the open compartment on the side of the bag when you carry it on your backpack. Lower your backpack, detach the Askare, take out the strap, put on the packed bag and you're ready to get to work. KEY FEATURES- Capacity approx. 7 litres
- 40 mm SR belt (max. circumference approx. 145 cm) attached to stabilizing wings
- Flat open pocket on the body side for storing the belt
- Thin, closed-cell foam padding on the torso side for shape retention and comfort
- One large zippered compartment
- Two small flat internal compartments
- Numerous elastic loops for internal organization
- Two attachment points on the inside for dummy cords and carabiners
- 35 x 10 cm loop area on the inside for organizers with hooks
- 2 x 2 PALS weaving tapes on both sides
- Numerous 25 mm webbing loops for elastic cords and backpack attachment buckles
- 15 x 10 cm loop surface on the outside for patches and identification plates
- Water drainage at the bottom
- All color options offer good NIR performance
- 5-year material and product warranty
- Made in Finland/Estonia
- Weight: 445 g
- Dimensions: 35 x 20 x 9 cm (W x H x D)
- Main fabric: 500D Cordura (100% Polyamide)
- Strap: 100% polyester
-
Compact waist bag with versatile internal organization and external attachment points. Waist bags are already very versatile, but the Kukkaro is even more so thanks to the many ways you can customize it to suit your specific needs. On the inside, the bag has a number of options for organizing your belongings: elastic webbing loops of different sizes, flat pockets, tie-down loops and a loop surface for attaching organizers with hooks. The back wall has a large flat compartment for larger items. On top of the compartment is sewn a single row of 50 mm elastic webbing, which contains two smaller approx. 4 cm wide loops and a larger approx. 9 cm wide loop, suitable for small items such as multi-tools, lighters etc. The front wall has two small flat compartments with attachment loops at the top. An 18 x 10 cm loop area on the inside of the front makes it possible to attach all kinds of organisers with hooks, etc. A large, open flat pocket on the back of the backpack allows you to store the waist belt if needed and it can be used as a large belt loop if you want to carry the Kukkaro on a belt or the hip belt of a backpack. The PALS webbing on the side wings and bottom allows you to attach small pockets, elastic cords and accessories. The straps on the side wings can also be used to quickly attach the backpack to the compression straps on the side of a backpack using additional SR buckles or G-hooks. Such buckles or G-hooks are not included with the backpack. Learn Finnish with Savotta: "Kukkaro" is Finnish for a bag or pouch that is a type of handbag, but not a handbag, nor just any small bag. The free Finnish online dictionary www.sanakirja.org defines "kukkaro" as "a small, usually leather pouch or bag, in which one carries small necessities and accessories, such as money, tobacco, etc. By definition, such a small fanny pack is really the ultimate "kukkaro". KEY FEATURES- Capacity approx. 1.5 litres
- 25 mm SR buckle strap (max. circumference approx. 145 cm) attached to stabilizing wingsFlat open pocket on the body side for storing the belt
- Large main compartment with zipper
- One large and two small flat inner compartments
- One large and two small elastic loops for organization on the inside
- Two attachment points on the inside for dummy cords and carabiners
- 18 x 10 cm loop area on the inside for organizers with hooks
- 1 x 2 PALS weaving straps on both side wings
- 1 x 3 PALS weaving tapes at the bottom
- 15 x 5 cm loop surface on the outside for patches and identifiers
- Water drain grommets at the bottom
- All color options offer good NIR performance
- 5-year material and product warranty
- Made in Finland/Estonia
- Weight: 215 g
- Dimensions: 20 x 12 x 5 cm (W x H x D)
- Main fabric: 500D Cordura (100% Polyamide)
- Strap: 100% polyester
-
Specially optimized for women's feet, the ZEPHYR MK2 GTX MID boot is the perfect combination of agility, lightness and stability. It is ideal for special, military, police and all armed forces. The mid-height shaft supports the foot during descents in free-rope and does not restrict movement during close combat. It has Velcro fasteners with a closed structure, which are especially useful for keeping laces in place and not snagging. It's made from a mix of water-repellent, tear-resistant suede and abrasion-resistant, breathable CORDURA® material. With a locking hook, the lacing can be perfectly adjusted at the forefoot and ankle. Lacing technology with two separate lacing zones on the forefoot and upper. This means that the shoe can be adjusted to the anatomy of the foot and laced differently for ascents and descents. Thanks to the waterproof and breathable GORE-TEX Extended Comfort Footwear membrane, this model is ideal for work in temperate or wet areas. The double-layer PU midsole is reinforced with a MONOWRAP® structure, which supports the foot like an exoskeleton. The ZEPHYR MK2 GTX MID is a certified professional boot. Features- Intervention shoe
- Waterproof and breathable properties
- GORE-TEX Extended Comfort waterproof/breathable lining
- Inner protection to prevent premature wear due to descent
- Good heel padding to minimize the impact of the landing
- Closed lace hooks to prevent accidental snagging during airborne activities
- 2 separate lacing zones on the forefoot and upper
- Comfort insole
- Midsole with LOWA MONOWRAP® structure to support the foot
- Slip-resistant "Lowa® X-Trac Military" outsole
- Optimal grip on smooth, wet and greasy surfaces.
- Non-slip, resistant to oil, gasoline and contact heat.
- The outsole is also antistatic and has a heat- and cold-insulating sole.
- Women's Size: UK 3 - 6.5
- Shaft Height: Medium
- Weight/pair (UK size 5) : 970 g
- Color : Drak Brown (493)
- Work shoe certified according to DIN EN ISO 20347:2012 / Code: O2 HI CI WR HRO FO SRC
- Direct injection molding of the sole
- Polyurethane foam
- Double-layer midsole injected directly into the shoe
- Midsole: 100% polyurethane (PU)
- Outsole: Special rubber compound
- Insole: approx. 9% polyamide / approx. 90% polyurethane (PU)
- Outer material: 80% suede leather, 20% textile
- Lining: 100% GORE-TEX Extended Comfort Footwear
-
The development of our new synthetic and lightweight combat glove is based on the key features of the Target Light Duty gloves, which offer maximum dexterity and wearing comfort, allow perfect control of weapons and are enhanced with the proven and advanced technology of the D3O® impact protection. The Target Combat is an extremely finger-sensitive and slim fit tactical glove that is equipped with the MoG/AX ® DexSuede and D3O ® impact technology. Main features :- Palm made of DexSuede - a very thin synthetic suede that offers maximum dexterity and dexterity.
- DexSuede also protects the user from 100-degree contact heat for 10 seconds.
- The fingertip stitched slim finger construction provides extremely high dexterity for perfect weapon handling, control of radios and delicate equipment
- Reinforcements on the trigger guard for more durability, dexterity and wearing comfort.
- 2 flexjoints on the index finger for maximum flexibility when handling weapons
- C-Grip construction improves the durability of your glove and protects the index finger from burns from the hot barrel of your gun.
- Thumb construction for reloading - reinforced thumb piece and specific design for perfect reloading of magazines.
- Reinforced patch on the heel provides extra strength against friction during use.
- Back hand made of 4-way stretch, durable, breathable and quick-drying fabric.
- D3O® knuckle protector with impact protection level 1 - covered with a double layer of Cordura® stretch for durability and abrasion resistance.
- Comfortable neoprene cuff with cut-out for watches - fits very well on the wrist for maximum freedom of movement at any time
- High-quality Velcro closure for adjustable fit covered with TPR, double stitched, prevents dust or sand traps
- Thumb, index finger and middle finger are touchscreen compatible thanks to the conductive suede patches
- Mixed silicone print for excellent grip on weapons, ropes, etc., but also on textiles, sweaty skin, ...
- Black
- Coyote Brown
- Wolf Grey
-
UTA is our patented quick refill solution (U.S. Patent No. 8,430,134 B2) that allows you to refill your water bottle while you're on the go. The reservoir of your water bladder is filled directly via the Source UTA adapter and the hose, so you don't have to open your water bladder or even take it off your back to refill it. Whether you have a military hydration bottle or a regular hydration bottle, Source UTA supports you and lets you fill your hydration bottle on the go, so you can drink hands-free again. Features of the UTA Hydration System Accessory- Easy to connect to the hose of your drinking bladder via Quick Connector
- Fits most bottles and taps
- Filling time from a 1.5L bottle: approx. 50 seconds
- Filling time from tap: 2L in 45 sec, 3L in 1 min 05 sec
- UTA turns off when the reservoir is full and automatically disconnects if the reservoir is accidentally overfilled
-
Clip-style sling attachment point for 1-1/4" webbing that provides weapon quick-release capabilities in an emergency. The Cross-Bolt Lock Bar allows the user to optionally lock the lever for added security. Compatible with the ASAP,® RSA®, M-LOK® Paraclip™ Sling Mount, shotgun Forward Sling Mounts and SGA® Receiver Sling Mounts and many other clip-in sling attachment points*. Pair with the MS1® Sling for a dedicated two-point sling, or with the MS1® MS3® Adapter or MS1® MS3® QD Adapter for a two-point to one-point convertible sling. Lightweight yet durable construction with hardened Melonite finished steel and heavy-duty polymer. Made in the US. NSN: MAG541-BLK 1005-01-656-0759 -
Discreet black belt holster for carrying an MK-2 Sabre defense spray. Features- MK-2 size black holster
- Flap with Velcro closure
- Semi-rigid 1680D nylon (ABS)
- Fixed belt clip
- Suitable for belts up to 6 cm high
- Dimensions: 12.7 x 5.7 cm
- Sold empty
-
Not in stock - on order
Please contact us for more information. -
The Professional Short Sleeve T is designed for a superior fit and professional profile while maintaining the wearability and comfort of a traditional t-shirt. Made from 6 oz. Ring-spun cotton for superior breathability and durable resilience, the Professional T offers a no-roll high-density collar for a clean, neat look, a spandex ribbed crew neck for a secure, flexible fit, and our traditional 5.11® pen pockets on the left sleeve. Moisture-wicking action keeps you cool and dry, while our fade, wrinkle, and shrink-resistant fabric treatment keeps you looking your best. A tapered cut and generous length ensure your shirt stays in place all day long, and double-needle tailoring at the shoulder makes for a sturdier garment that can withstand rough use. SPECIFICATIONS:- Traditional comfort, professional performance
- Moisture-wicking technology
- Resistant to fading, shrinking and wrinkling
- No roll collar
- Pen pockets on left sleeve
- Tapered fit
- Generous length
- 6 oz. Ring-spun 100% cotton
- - Double needle finish for durability
- Spandex Ribbed Crew Neck
- Printed label to prevent chafing
- Suitable for embroidery and silk screening
- 100% cotton (203g/m²)
- Color: navy blue (720)
-
Magpul Icon 6-panel structured fit trucker style cap with subtly embroidered Magpul logo on the left side. CHARACTERIZE:- Lightweight and stretchy
- 60% cotton / 40% polyester
- - Mesh back for improved breathability
- Adjustable snap closure
- Magpul logo embroidered on left side
- Min/max size: 6 7/8 -7 5/8
- Colours: grey/black, anthracite grey, olive green
-
The long curved spoon connects the spoon garage on the belt to the backpack. This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. The garage is attached to the combat belt. The outer compartment connects to the backpack. The outer compartment of the double spoon garage 2.0 connects to the backpack with the curved long spoon, which is placed in the adjustable spoon cover. The curved spoon moves with your hips to allow the legs to move freely through the backpack, minimizing energy consumption in your body.
