• This kit includes everything you need to make all kinds of elastic cord things like zigzag attachment things for backpacks etc. KEY FEATURES
    • 400 cm elastic cord
    • 4 strong drawstring closures
    • Think, cut, burn, baste, and you're done
    • 2-year material and product warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • Weight: 45 g
    • Dimensions: 11 x 15 x 2 cm (W x L x D) (in packaging)
    • Elastic cord: polyester/rubber
    • Drawstring closures: polyamide
    EXAMPLES You can do a lot with this kit, here are a few examples:
    • An elastic zigzag or similar attachment thing on the outside of a backpack.
    • And probably a lot of other things.
    • Most people will probably use these for all kinds of attachment things. The included 400cm cord and four drawstring closures should be enough for a pair or even four of these things, depending on the size and design of the thingy.
  • Savotta Helmet Camo Scrim

    19,9022,90
    While natural foliage is the ultimate helmet camouflage, a bushy cover with a 3D effect might be the next best thing. Quick and easy to use, easy to customize. They effectively break up helmet silhouettes and provide quick camouflage adjustment to suit different environments. The design is very simple, a single flat piece of 500D Cordura with alternating zigzag shapes cut into it. The zigzag pattern is positioned in such a way that it creates an opening for NVG mounts on the front. Small slits have been cut around the edges for the elastic cord. Thread the elastic cord through the slits, tie it at the back, and pull it over your helmet like a shower cap. Finish it off by pulling back any excess material and rolling it underneath yourself to tighten the cover. If you want to adjust the fit, you can play around with threading the elastic cord through the slits and zigzag pattern in different ways. And if you get really wild and feel the need: you can even cut off excess material from the cover, but of course, such huge adjustments are at your own risk. KEY FEATURES
    • 3D Effect Camouflage Plate for Helmets
    • One-size-fits-most, best suited for high-cut L and XL helmets
    • Lightweight Laser Cut 500D Cordura
    • Quick and easy to apply and remove
    • All color options offer good NIR performance
    • 2-year material and product warranty
    • Gemaakt in Finland
    TECHNICAL SPECIFICATIONS
    • Weight (in retail container): 65 g
    • Dimensions (in retail packaging): 10 x 15 x 4 cm (W x L x D)
    • Fabric: 500D Cordura (100% polyamide)
  • This simple kit allows you to create different markers by combining the different patches or using them as is. The kit includes two 25 x 25 mm squares, two 20 x 50 mm lines and a 50 x 50 mm square. This allows you to make a number of different combinations, or just highlight a lot of different things with separate patches. They are made of fairly high-quality photoluminescent material, the same material that we have been using for decades in various military applications. This stuff is quite effective and lasts a very long time. We examined 10+ year old material we had in stock and it performed with around 90% the same efficiency as its brand new counterpart. Since the material itself has a very long lifespan, we decided not to rely solely on lamination/gluing to hold the photoluminescent material to the hook band. These are therefore also sewn for the longest possible lifespan. This significantly increases the cost of production, but now we can be sure that these will not delaminate after a few winter/summer use cycles. KEY FEATURES
    • Bracket-attached glow-in-the-dark patches
    • Kit includes two lines, one large and two small squares
    • High quality and high performance photoluminescent material
    • Not only laminated, but also sewn to prevent delamination
    • 2-year material and product warranty
    • Gemaakt in Finland
    TECHNICAL SPECIFICATIONS
    • Weight: 6 g
    • Material: Photoluminescent material (phosphor-free, non-radioactive, non-toxic)
    • Brightness, mCd/m2: 150/22 (10/60 min after light failure)
    • Expiry time: about 35 hours
  • The Savotta Utility Pouch Mini can be attached to backpacks, tactical belts and the like using the Pals/Molle loops. It offers you space for the little things of everyday life or for a smartphone, compass, weapon cleaning kit, spare batteries or a first aid kit. The bag can be opened quickly and easily with the zipper. - Made in Finland - NSN 8465-58-000-3652 - Universal bag -Zipper - Drainage eye at the bottom - PALS / Molle loops Material: - Backpack: 100% Polyamide, Cordura 1000 den - Webbing: 100% Polyester - Dimensions: 12 x 10 x 6 cm
  • Savotta Utility Pouch Small

    52,9058,90
    A medium-sized pouch for general use. KEY FEATURES
    • Designed for general use
    • Two-way zipper
    • Internal divider and loops for organization
    • PALS weaving tapes on the outside
    • Drainage feed-through at the bottom
    • PALS-compatible mounting system
    • 5-year material and product warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS Weight: 170 g Dimensions: 21 x 13 x 7 cm (H x W x D) Main Material: 1000D Cordura (100% polyamide) Oar: 100% polyester NSN 8465-58-000-3653
  • Savotta Hatka 12L

    88,95108,95
    At first glance, the Hatka 12L may seem like just a roller bag with shoulder straps, but when you look closer, you'll see that there's actually a lot going on. This design was conceived as part of a special military carrying system, which required a small daypack that could be easily attached to a larger backpack. On the outside are four rows of PALS weaving tapes. These can be used for attaching pouches, bungee cords, and buckles to quickly attach or detach the Hatka to a larger backpack. The four webbing loops at the bottom can be used for elastic cords, so you can carry items under the backpack. Two long internal compartments are there to organize smaller items, and the D-ring provides a point to store small valuables. The large external pocket against your back is large enough for a hydration reservoir or tarp. The simple 25mm webbing shoulder straps are attached to D-rings and completely removable, and therefore also replaceable with padded shoulder straps if you wish. These can also be set as a single diagonal shoulder strap. They are designed to be lightweight, easy to carry and store so you can attach the Hatka to larger packs. KEY FEATURES
    • Capacity approx. 12 litres
    • Quick and secure roll-top closure with SR buckle
    • Simple, detachable 25mm low-profile shoulder straps
    • PALS webbing on the outside
    • Loop for identification and patches on the outside
    • Four loops at the bottom
    • One large external back compartment
    • Two long internal compartments
    • D-ring attachment point on the inside
    • All color options offer good NIR performance
    • 5-year material and product warranty
    • Made in Finland/Estonia/Poland
    TECHNICAL SPECIFICATIONS
    • Weight: 480 g
    • Dimensions: 25 x 40 x 15 cm (W x L x D)
    • Main material: 500D Cordura (100% polyamide)
    • Strap: 100% polyester
    TRICKS AND MODULARITY Clip and tie it to a larger backpack for use as a "grab and go" daypack. You can do this by tucking it under the flap or by using packing straps. The really great way is to attach the Hatka to the side compression or lid straps using G-hooks or PALS mounted SR buckles. You'll need four of them to securely attach the Hatka 12L to the back of your Jääkäri M, L or XL. Please note that these attachment buckles ARE NOT INCLUDED with the backpack. If you need to, you can add a lot of stuff to the outside of this otherwise quite small backpack. The PALS webbing allows you to attach bags, but you can also thread bungee cords to it (along with the four webbing loops at the bottom) for rain gear, tarpaulins etc. Because the Hatka is in many ways a spiritual successor to the venerable 202 daypack, it also has very rudimentary shoulder straps. This reduces weight and bulk, which is great if you're strapping it to a larger backpack. If you need to, you can easily replace it with more advanced padded options. Although there aren't too many compartments, you can still make good use of them if you pack smartly. Of course, you can put your large items in the main compartment, and the two small inner compartments can hold all kinds of small items and even water bottles. The D-ring can be used to clamp or tie small valuables. The external compartment against your back can be used to carry a closed-cell foam pad as a frame cloth, or to carry a tarp or hydration bladder. LEARN FINNISH WITH SAVOTTA "Hatka" is a peculiar Finnish word, it is only used in the phrase "ottaa hatkat" which means "to escape" or "to leave in a hurry". The Hatka pack was conceived while prototyping small, quick-to-remove escape and escape escape kits for a military project, so now you know why this peculiar name makes so much sense.
  • A versatile helmet cover with the right camouflage attachment cords throughout. Designed around the geometry of the Ops Core FAST XP high cut helmet shell, but also fits many other high cut helmets. The world is full of covers for high-cut helmets, but since 99% of these covers don't offer a real way to properly camouflage the helmet with foliage etc., we decided to unleash our offer on those as well. Made of 500D Cordura instead of regular garment fabric for high abrasion resistance. Unlike most high-cut helmet covers, which only have that zigzag cord at the top, our cover has elastic cord attachment points around the helmet shell. This allows you to camouflage your helmet well with foliage and the like. Because the elastic cord is not sewn to the cover, you can choose not to use it at all or to adjust or replace it as needed. The back of the case features a piece of 25mm webbing, with bartacked mounting points for IR strobes and the like. Then we have the standard loops on the sides, top and back for identifiers, patches, cameras, pockets for counterweight etc. The cover is attached via six pieces of one-wrap to pieces of hook on the inside of the helmet shell. If your specific helmet doesn't have pieces of hook exactly where it needs to: that's why we supply a piece of self-adhesive hook of 50 x 150 mm with every cover! Cut and paste it wherever you need it. KEY FEATURES
    • Designed for Ops-Core FAST XP scale geometry
    • Also fits many other high-cut helmets
    • Abrasion resistant 500D Cordura
    • Elastic cord for foliage and all-round cable routing
    • 25mm webbing on the back for IR flashes etc.
    • 50mm loop on the sides and top
    • 100 x 100 mm loop on the back
    • One-Wrap attachment in the helmet shell
    • Comes with a 50 x 100 mm piece of self-adhesive hook
    • All color options offer good NIR performance
    • 5-year material and manufacturer's warranty
    • Gemaakt in Finland
    TECHNICAL SPECIFICATIONS
    • Weight: L: 100 g, XL: 105 g
    • Fabric: 500D Cordura (100% polyamide)
    • Strap: 100% polyester
    SIZE, FIT AND COMPATIBILITY The sizes are matched to the Ops-Core FAST helmet sizes. A cover in size L fits a helmet in size L, a cover in size XL fits on a helmet shell in size XL. At the moment we don't offer M or XXL size covers, but L size covers fit M size shells (and XL size covers also fit L size shells) with the elastic cord as a kind of size adjustment system. Don't forget that each cover comes with a piece of adhesive hook tape, use this to create suitable attachment points in your helmet for the attachment straps! With the elastic cord that surrounds the helmet, you can tighten and shape the case to better fit the contours of helmet shells of different shapes and sizes. In addition to the perfect match, the Ops-Core FAST XP, we also tested the fit on a number of other common helmet designs:
    • Ops-Core FAST SF (super high cut): fits pretty nicely after some tweaking
    • UaRms TOR-D (slightly thicker helmet shell than Ops-Core): fits very well
    • Galvion Caiman ballistic (very different shape): fits quite well after some adjustments
    • PGD ARCH (old generation, Ops-Core XP shell geometry): fits very nicely
    • PGD ARCH/MICH (current (2023) gen): Fits, but NVD bungees and rear rail screws end up under the cover*.
    *The current-generation PGD ARCH/MICH helmet rails are covered by the visor at the front and rear. This blocks access to the rear rail screws (NVD ballast bag attachment) and the NVD bungee cords at the front of the rails. You can easily customize the cover by carefully cutting small holes (and burning them gently to avoid fraying) for the bungees and screws. Changes to the cover are of course at your own risk!
  • Savotta 2-Mag Pouch AR15

    34,9036,90
    Magazine holder for two AR15 magazines of 30 cartridges. Tuck tab and Velcro lid closure, PALS and strap compatible fastener. KEY FEATURES
    • Suitable for two AR15 30 rd magazines
    • Protective lid with pleated tab and hook-and-loop closure
    • Built-in hook-and-loop "silencer" in the lid
    • Circumference and retention adjustable via elastic cord
    • Reinforced bottom
    • Attachment system compatible with PALS and belt
    • Water drainage transit at the bottom
    • All color options offer good NIR performance
    • 5-year material and product warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • Weight: 100 g
    • Dimensions: 8 x 19 x 5 cm (W x L x D)
    • Main fabric: 1000D Cordura (100% Polyamide)
    • Strap: 100% polyester
    Our storage bags with lids are designed to transport your magazines reliably and well protected in all conditions and to open them easily, even with thick winter gloves on. The lid keeps the worst mud, sand and snow out of the bag. External reinforcement along the bottom ensures a longer lifespan, as this is where these types of cases wear out first. At the very bottom is a drainage passage to let water out. The back features our standard PALS fastening webbing system with pleated tabs. The fastening straps can also be woven into belt loops for 45-50 mm wide belts. An elastic cord with a loop around the pouch offers adjustable retention and circumference adjustment. This is not only useful for loose magazines, but also to adjust the pouch for radios, IFAK inserts etc. LID CLOSURE SYSTEM The lid of this case closes with a polyethylene reinforced pressure tab and Velcro. A pleated tab is mechanically very simple, but extremely reliable compared to plastic buckles, snaps, or regular hook-and-loop work. Indeed, this is almost identical to the way the attachment straps on all of our PALS hold-down bags are secured, only shorter and with a quick-access tab. Thanks to the Velcro strap, the bag stays tightly closed even when half empty and can be closed quickly without the need to tuck in the tab. The hook section can be covered with a sewn-in piece of loop for quiet operation. Pro tip: If you're using a brand new case for the first time, press the tab with your fingers to give it a C-bend. This makes it much easier to use, as its claw-like shape finds its way better into the small pocket of webbing that locks it in. Don't worry, polyethylene (in all its boring low-tech glory) is highly crush resistant and won't crack or break, which is why we use it. IT FITS ALL KINDS OF THINGS Although they are designed for two AR15 30 rd magazines, they also fit all kinds of other types of magazines and gear. Here are some examples:
    • AR15 30 rd PMAG without Ranger Plate, 2 Pack
    • AR10 20 rd magazine, 1 pcs
    • HK417 20 rd magazine, 1 pcs
    • IFAK insert
    • Flashbang / smoke grenade
    • Radio
  • Savotta 2-Mag Pouch AK

    34,9036,90
    Magazine pouch for two regular AK/RK 30 round magazines. Tuck tab and Velcro closure, PALS and strap-compatible attachment system. KEY FEATURES
    • Suitable for two AK/RK 30rd magazines
    • Protective lid with insert tab and Velcro closure
    • Built-in Velcro "damper" in the lid
    • Circumference and retention adjustable via elastic cord
    • Reinforced bottom
    • PALS and belt-compatible attachment system
    • Water drainage tulip at the bottom
    • All color options offer good NIR performance
    • NSN: 1005-58-001-8494
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • Weight: 115 grams
    • Dimensions: 8 x 23 x 5 cm (W x L x D)
    • Main fabric: 1000D Cordura (100% Polyamide)
    • Band: 100% polyester
    Our magzijnpouches with lids are designed to transport your warehouses reliably, well protected in all conditions and to be easy to open even with thick winter gloves on. The lid keeps the worst mud, sand and snow out of the pouch. External reinforcement bands along the bottom ensure a longer lifespan, as these types of pouches are usually the first to wear out. At the very bottom is a drain grommet to drain the water. The back features our standard PALS attachment system with plug-in tabs. The fastening straps can also be woven into belt loops for belts 45-50 mm wide. A piece of elastic cord looped around the pouch provides adjustable retention and circumference adjustment. Not only ideal for loose pouches, but also for adjusting the bag for radios, IFAK inserts, etc. LID CLOSURE SYSTEM The lid of this pouch is closed with a polyethylene-reinforced tab and Velcro. A tuck-in loop is mechanically very simple, but extremely reliable compared to plastic buckles, press studs or simply with Velcro. This is virtually identical to the way the attachment straps on all of our PALS attachable pouches lock into place, only shorter and with a grip tab for quick opening. Thanks to the Velcro closure, the pouch remains securely closed even when half empty and can be closed quickly without putting the tab inside. The hook piece can be covered with a sewn-in loop piece for quiet operation. Pro tip: When using a brand new pouch for the first time, press down on the tab with your fingers to give it a C-bend. This makes it much easier to use, as its claw-like shape finds its way better into the small pouch with strap that locks it in. Don't worry, polyethylene (in all its boring low-tech glory) is highly wrinkle-resistant and won't crack or break, which is why we use it. FITS ALL TYPES OF Although designed for two Finnish RK 30 rd magisnes, these also fit in all kinds of other magzijns and such. Here are some examples:
    • RK 30e plastic magazine, 2 pcs
    • AK-47 30e steel magazine, 2 pieces
    • AK-74 30th magazine, 2 pieces
    • AR15 30e PMAG with Ranger Plate, Pack of 2
    • IFAK insert
    • 0.5 litre bottle
    • Radio
  • A compact counterweight bag, attaches with Velcro and via webbing loops to screws/rails. Designed for 45 x 60 x 5 mm Finnish Senop lead weight discs. KEY FEATURES
    • Designed to fit up to six 45 x 60 x 5 mm weight plates
    • Two compartments for weight discs
    • One large compartment for random items
    • Attaches with Velcro and girth loops with screw adapters
    • External elastic loops for cord management etc
    • Also functions as a holder for spectacle straps
    • 5 x 15 cm loop on the outside for patches
    • All color options offer good NIR performance
    • 5-year material and product warranty
    • Gemaakt in Finland
    TECHNICAL SPECIFICATIONS
    • Weight: 50 g
    • Fabric: 500D Cordura (100% polyamide)
    • Strap: 100% polyester
    • Buckles: steel
    DESCRIPTION The internal elastic webbing compartments are designed for our locally common Senop lead discs (45 x 60 x 5 mm), as used by the Finnish Defence Force, but they can also fit various other gear. In the large space under the elastic bands, a block of max. 100 x 60 x 20 mm, the two smaller weight compartments each fit a block of max. 45 x 60 x 15 mm. The pouch can be attached to the back of your helmet/cover with Velcro and two adjustable straps. The straps come with screw buckles, attach these to the rear chin strap/rail screws on your helmet, place the pouch where you want it and thread the two straps through the screw buckles. If you fasten the straps properly, they will ensure that the pouch does not lie around when you weigh it down. If your helmet has rails with suitable attachment points, then you may not need to use the buckles. Because the pouch is open on the sides, you can guide the elastic of your goggles through it and the pouch will stay firmly in place on the helmet no matter what. The elastic loops on the outside allow you to guide and tidy up cords, attach glow sticks, etc. Even if the straps are attached to the inside of the back wall, there's still some loop surface you can use to store small patches when you're not using them. No weight plates included, these are sold separately: NVD counterweight kit.
  • A larger counterweight bag for Finnish Senop lead weights and 10 x 10 cm identification plates. Designed to work with the usual Ops Core FAST XP high cut helmet and our High cut helmet cover V1. KEY FEATURES
    • Internal elastic compartments for lead weights
    • Designed for six weight discs of 45 x 60 x 5 mm
    • Can also carry weights of other shapes and sizes
    • Attaches to helmet rail with screws and loop
    • Upper fastening straps for our High cut helmet cover V1
    • External elastic loops for cord management etc.
    • Also functions as a holder for spectacle straps
    • 10 x 12 cm loop on the outside for patches
    • All color options offer good NIR performance (read more)
    • 5-year material and product warranty
    • Gemaakt in Finland
    TECHNICAL SPECIFICATIONS
    • Weight: 60 g
    • Fabric: 500D Cordura (100% polyamide)
    • Webbing: 100% polyester
    • Buckles: steel
    DESCRIPTION The internal elastic webbing compartments are designed for our locally common Senop lead discs (45 x 60 x 5 mm), as used by the Finnish Defence Force, but they can also fit various other gear. In the large space under the elastic bands, a block of max. 100 x 80 x 20 mm, the two smaller weight compartments each fit a block of max. 45 x 80 x 15 mm. Because the pocket is open on the sides, you can guide the elastic of your goggles through it and it will stay firmly in place on the helmet no matter what. The elastic loops on the outside allow you to guide and tidy up cords, attach glow sticks, etc. The included screw buckles allow you to attach the case very securely to the back of your helmet, so that it does not move when it is weighted. The fastening buckles work with Ops-Core, Galvion and similar rail screws. The upper attachment straps attach to the 25mm webbing on our High cut helmet cover V1. No weight discs included, these are sold separately.
  • Savotta Camo Scrim Kit

    19,9022,90
    Add effective camouflage to your gear with these serrated laser-cut camouflage strips. Quick and easy to apply, remove and reuse. KEY FEATURES
    • 3D effect camouflage for gear
    • Kit contains five approx. 145 cm long scrim strips
    • Lightweight Laser Cut 500D Cordura
    • Easy to apply, remove and reuse
    • All color options offer good NIR performance
    • 2-year material and product warranty
    • Gemaakt in Finland
    TECHNICAL SPECIFICATIONS
    • Weight (in retail box): 110 g
    • Fabric: 500D Cordura (100% polyamide)
    DESCRIPTION With this simple kit, you can quickly match the camouflage effect of your gear to your surroundings. Each kit contains five approx. 145 cm long strips of the same colour. We recommend that you use elastic cord, thread, or tape to securely fasten the tarp if necessary. The design is very simple, a kind of large zigzag shape with smaller jagged zigzag patterns cut out along the edges. Notches have been made at regular intervals in the middle, so that you can tie the strip together by passing one end through the notch. And yes, you can cut and customize them however you want!
  • Savotta Tourniquet Pouch

    25,9026,90
    Fits the most common tourniquets from SOFTT-W to CAT Gen 7. Vertical PALS and strap and horizontal strap attachment options. KEY FEATURES
    • Fits most tourniquets, including SOF, CAT Gen 7, SAM-XT
    • Flap with Velcro closure
    • Elastic compartment for slimmer and thicker tourniquets
    • Elastic pen/glow stick loops on the sides
    • Attachment system compatible with PALS and belt
    • One-Wrap for horizontal belt attachment
    • All color options offer good NIR performance (read more)
    • NSN: 6510-58-001-8496
    • 5-year material and product warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • Weight: 65 g
    • Dimensions: 5 x 15 x 4 cm (W x L x D)
    • Strap: 100% polyester
  • Savotta Dump Pouch

    34,9036,90
    Clean, simple dump bag for empty magazines and other clutter. Attachment system compatible with PALS and strap. Main features:
    • Suitable for 4-5 rifle magazines
    • Top edge bound with webbing to maintain shape
    • Inner collar with adjustable elastic cord
    • Folds into a very compact bundle
    • SR buckle for attachment when folded
    • Attachment system compatible with PALS and belt
    • Water drainage at the bottom
    • All color options offer good NIR performance (read more)
    • NSN: 1005-58-001-8495
    • 5-year material and product warranty
    • Made in Finland/Estonia
    Technical specifications:
    • Weight: 150 g
    • Dimensions: 13 x 30 x 13 cm (W x L x D)
    • Main fabric: 500D Cordura (100% Polyamide)
    • Strap: 100% polyester
  • The most basic accessory of any backpack is a pair of reliable packing straps, we offer a few different styles to meet your specific needs and preferences. The fast and light plastic buckle with side release (SR) is a sure choice for most applications. BUCKLE AND LENGTH OPTIONS To meet specific needs and preferences, we offer a few different buckle options: 1) SR buckle: For most applications, the fast and light plastic buckle with side release (SR) is more than sufficient. No wonder this is the "standard" buckle for this type of belt worldwide. 2) CAM buckle: For really heavy use, a heavier metal cam buckle is a solid choice. There is a reason why the Finnish Defense gives each soldier a pack of belts that are virtually identical to this one. Length options, indicated as the maximum circumference of the object around which the belt can be looped, are 80 cm and 120 cm. The shorter 80 cm is sufficient for most of the stuff you want to attach to the outside of a backpack, sleeping bags and sleeping pillows etc. The 120cm is great for all kinds of bulk goods, field camp tent rollers, firewood etc, it's enough for pretty much anything you'll ever need it for. And hey, if the length is not enough you can always put it on a chain! KEY FEATURES
    • Fast and light SR buckle
    • 25 mm (1") wide strap
    • Two length options: 80 cm and 120 cm
    • Package includes two straps
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • 80 cm: weight 40 g each
    • 120 cm: weight 50 g each
    • Main material: 100% polyester band
  • The most basic accessory of any backpack is a pair of reliable packing straps, we offer a few different styles to meet your specific needs and preferences. The fast and light plastic buckle with side release (SR) is a sure choice for most applications. BUCKLE AND LENGTH OPTIONS To meet specific needs and preferences, we offer a few different buckle options: 1) SR buckle: For most applications, the fast and light plastic buckle with side release (SR) is more than sufficient. No wonder this is the "standard" buckle for this type of belt worldwide. 2) CAM buckle: For really heavy use, a heavier metal cam buckle is a solid choice. There is a reason why the Finnish Defense gives each soldier a pack of belts that are virtually identical to this one. Length options, indicated as the maximum circumference of the object around which the belt can be looped, are 80 cm and 120 cm. The shorter 80 cm is sufficient for most of the stuff you want to attach to the outside of a backpack, sleeping bags and sleeping pillows etc. The 120cm is great for all kinds of bulk goods, field camp tent rollers, firewood etc, it's enough for pretty much anything you'll ever need it for. And hey, if the length is not enough you can always put it on a chain! KEY FEATURES
    • Fast and light SR buckle
    • 25 mm (1") wide strap
    • Two length options: 80 cm and 120 cm
    • Package includes two straps
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • 80 cm: weight 40 g each
    • 120 cm: weight 50 g each
    • Main material: 100% polyester band

Title

Go to Top