Haven't found what you were looking for ? Mail us !|info@afullmetaljacket.com
  • Padded, quick-to-attach backpack with shoulder harness for the Keikka duffel bags. Steel-bearing hardware for maximum strength and service life, just like the Keikka duffel bags, they can carry more weight than you ever should.
    • Quick attachment with buckle
    • Steel load-bearing hardware
    • Double D-ring adjustment
    • Removable vertically adjustable chest strap
    • Foam filling with closed cells
    • 5-year material and manufacturing warranty (read more)
    • Made in Finland/Estonia
    • Weight: 270 g
    • Length: 40 – 90 cm (min – max)
    • Main material: 1000D Cordura (100% polyamide)
    • Webbing: 100% polyester
    • Buckles: steel
    • Filling: foam with closed cells
       
  • Not in stock - on order
    KEVYT RAJAPARTIO The daypack, originally designed for the Finnish Border Guard and also known as the Kevyt Rajapartio, is compact, simple and very versatile. Due to its slim shape, the backpack does not stand in the way even in tight spaces and is ideal for skiing and hunting. In its size category, the Kevyt Rajapartio is an unusually sturdy backpack to carry. The aluminium-reinforced internal support frame keeps the backpack in strong shape even when heavy loads. With the compression straps of the bag, even a backpack that is not full can be put on so that it sits firmly and does not rock. Compartments The bag (approximately 50 x 25 x 10-20 cm dimensions) is closed by tightening the drawstring opening secured with a waterproof protective collar that also allows overfrapping. The opening is covered with a flap that encloses the top of the backpack and is fastened with straps. The generous length of the tyres offers a lot of space under the flap for overpackaging. The contents of the upper compartment can also be accessed quickly from the right side via a vertical zipper that runs over the full height of the backpack. Against the back in the bag is a pocket the size of the entire back for the supporting frame of the backpack. The compartment is also ideal for carrying, for example, a drinking bag or other flat items. In the bag is a holder for a thermos so you can always find it where it belongs. With the four compression straps on the sides of the backpack, the bag can be tightened compactly even when it is not full. The flap of the bag has a flat pocket with zipper for small items (size about 20 x 20 cm). OTHER ANCHORAGES On the flap at the back of the backpack and at the bottom of the bag you will find attachment loops to carry a rifle. The loops are also equally suitable for transporting other exceptionally long devices. The load is secured by donting a strap that circles the entire backpack. It is also possible to attach items that would not otherwise fit in the backpack behind the compression straps of the bag. The bottom of the backpack has four fastening loops for detachable straps. Binding to the bottom is an excellent method of wearing for, for example, coiled sleeping mats. On both sides of the lap belt there are fastening loops to attach small items. SUPPORT SYSTEM The wide, anatomically shaped, sturdy shoulder straps and the well-padded hip belt ensure supported and comfortable wearing. The hip belt buckle can be quickly detached with one hand, which is a very valuable feature in a possible emergency. The buckle collar provides extra comfort and support when wearing. With the support on the top, the backpack is also easy to carry by hand. The back is reinforced with a very durable frame of plastic plate to which two vertical aluminum rods with rivets are attached. This lightweight frame keeps the backpack upright and can also be carried comfortably with a heavier load. The support frame can also be removed from the backpack if desired. The generous and sturdy cushions against the back are a rarity in a backpack of this size category and make the Kevyt Rajapartio a surprisingly comfortable small backpack to carry. TECHNICAL SPECIFICATIONS:
    • External dimensions: height 50 cm, width 25 cm, depth 20 cm.
    • Content: 25 l.
    • Weight: 1.75 kg.
    • Materials: 1000D Cordura, metal buckles and 8 mm spiral zippers.
    • Frame: DUR aluminium.
    • Colour: olive green.
    Warranty: The product has a 5-year warranty for material and manufacturing defects. KEY FLAG PRODUCT: This Finnish Key Flag product is partly manufactured at our factory in Estonia, but more than 50% of the work is made in Finland.
  • Not in stock - on order
    LIGHT BORDER PATROL Known in Finnish as the Kevyt Rajapartio, originally designed for the Finnish border guard. Capacity approx. 25 l. Compact, simple and versatile. Due to its slim shape, the backpack will not get in the way even in tight spaces and is ideal for skiing and hunting. In its size category, the Kevyt Rajapartio is an unusually sturdy backpack to carry. The internal support frame reinforced with aluminum keeps the backpack firmly in shape, even with a heavy load. With the compression straps of the bag, even a pack that is not full can be fastened so that it sits firmly and does not move back and forth. Compartments The bag (dimensions approximately 50 x 25 x 10–20 cm) is closed by tightening the opening of the drawstring, which is secured with a waterproof protective collar that also allows overpackaging. The opening is covered with a flap that encloses the top of the backpack and is fastened with straps. The generous length of the straps offers plenty of space under the flap to overpack. The contents of the upper compartment are also quickly accessed from the right side via a vertical zipper that runs over the full height of the backpack. Against the back in the bag is a pocket the size of the entire back for the supporting frame of the backpack. The compartment is also ideal for carrying, for example, a water bag or other flat stuff. There's a holder for a thermos bottle in the bag, so you can always find him where it should be. With the four compression straps on the sides of the backpack, the bag can be pulled compactly, even if it is not full. The flap of the bag has a flat zippered compartment for small items (dimensions approximately 20 x 20 cm). OTHER ANCHORAGES On the flap at the back of the backpack and at the bottom of the bag you will find fastening loops to carry a rifle. The loops are also equally suitable for carrying other exceptionally long devices. The load is secured by tightening a belt that encloses the entire backpack. It is also possible to attach items that would not otherwise fit in the backpack behind the compression straps of the bag. The bottom of the backpack has four fastening loops for detachable straps. Tying to the bottom is an excellent method of wearing for, for example, rolled-up sleeping mats. On both sides of the hip belt are fastening loops for dangling small objects. SUPPORT SYSTEM The wide, anatomically shaped, sturdy shoulder straps and the well-padded hip belt ensure supported and comfortable wearing. The hip belt buckle can be quickly detached with one hand, which is a very valuable feature in a possible emergency. The nodded chest strap provides extra comfort and support when wearing. With the support handle on the top, the backpack is also easy to carry by hand. The back is reinforced with a very durable plastic plate frame on which two vertical aluminum rods are attached with rivets. This lightweight frame keeps the backpack upright and is comfortable to carry, even with a slightly heavier load. The support frame can also be removed from the backpack if desired. The generously sized and sturdy cushions against the back are a rarity in a backpack of this category and make the Kevyt Rajapartio a surprisingly comfortable little backpack to carry. TECHNICAL SPECIFICATIONS: External dimensions: height 50 cm, width 25 cm, depth 20 cm. Content: 25 l. Weight: 1.75 kg. Materiaal: 1000D Cordura Frame: DUR aluminium. Colour: olive green. WARRANTY AND WARRANTY: The product has a 5-year warranty against material and manufacturing defects. KEY FLAG PRODUCT: This Finnish Key Flag product is partially manufactured at our factory in Estonia, but more than 50 of its work is made in Finland. Shipping within 24 hours!
  • Not in stock - on order

    Savotta LJK

    545,00
    LJK This heavy backpack with external frame was originally designed for paratroopers of the Finnish army in the early 1980s. Capacity approx. 80 l. This backpack, designed for heavy military use, can be used more heavily than most users, such as a free fall of an aircraft. Given its properties, LJK is also suitable for average users and it is an excellent choice for those looking for a lifetime collaboration. The LJK backpack was launched in 1985. Originally designed for military use, the backpack was also warmly welcomed by civilian users. The special features of the model are a frame without the upper curve, which makes moving easier because it does not get in the way of the head. There are no pockets on the sides of the backpack in the lower section, which makes cross-country skiing with the backpack more comfortable. The LJK backpack is still used in the Finnish Armed Forces and is just as popular with recreational users. A traditional backpack with external frame is at its best with a heavy load, but is also suitable for lighter trips. The external tube frame ensures air circulation between the user's pocket and back, significantly reducing the heat load. Although anatomical backpacks have taken over some grass in the backpack market, there are still situations where nothing is better than an external frame backpack. Compartments The upper compartment of the bag (dimensions about 45 x 40 x 20 cm) is closed by attaching the opening of the drawstring, which is secured with a waterproof protective collar that also allows overpackaging. The opening is covered with a generous flap that is secured with straps. The straps are long enough to wear, for example, a sleeping bag or mat under the flap. If necessary, the straps can be easily extended with the included detachable straps. The top and lower pockets of the bag are separated by a built-in distributor. The valve of the upper compartment has a flat compartment for small objects (dimensions about 25 x 45 cm), which are also suitable for larger objects that need to be easily accessible. The exterior of the upper compartment is equipped with a flat card pocket with zipper (dimensions approximately 30 x 30 cm). The lower compartment of the bag (dimensions about 35 x 35 x 20 cm) opens on both vertical sides with a zipper. The zippers are protected with a button closure. The flaps should always be gently fastened, as they take away some of the weight and strain the zippers. The side pockets (dimensions approximately 40 x 10 x 7 cm) are closed by attracting the waterproof protective collar, which is covered with a flap that can be secured with straps. The left side pocket is divided into two compartments with a built-in distributor. The lower compartment is accessible via the zipper on the side. In the lower back there is a large outer compartment (dimensions approximately 32 x 25 x 10 cm) that is closed by tightening the protective collar. The bag is covered with a valve that is fastened with two straps. This bag is ideal for packing items that should be easily accessible during the walk, such as a camping stove and food. OTHER ANCHORAGES There is a generous number of fastening loops on top of the valve and in the main compartment. This makes it possible to secure even large loads (such as the beloved Sissi tent) on or under the valve by means of detachable tires. The loops on the inside of the flap are perfect for attaching a sleeping mat. Especially a military-style tent mattress can be attached to this by means of the elastic bands. Axes or other long, narrow stocks can be transported behind the tunnel-shaped side pockets. The fasteners with straps above the side compartments ensure the attachment of the supplies. The lower corners of the shoulder straps have loops that serve as attachment points for small objects, such as water bottles. SUPPORT SYSTEM The frame of the support system is the strong aluminium tube frame of the LJK model. Unlike civilian backpacks, LJK does not have an upper bend because the bend easily sits in the head when it is necessary to move on rough terrain. Furthermore, the frame of LJK has been reinforced with additional support blocks. The shoulder straps and waistband are firmly padded and anatomically shaped. The buckle of the hip belt can be detached very quickly with one hand. It is a very valuable feature in a possible emergency. The nodded chest strap provides extra comfort and support when wearing. The stepless adjustable (length) support support system and lap belt of the backpack can be adapted to users of all different heights and sizes. It is possible to adjust the center of gravity of the shoulder straps even while walking by tightening and loosening the straps attached to the top of the frame. The centre of gravity of the backpack itself between the shoulders and the hips is adjusted by loosening and tightening the shoulder straps and hip belt. TECHNICAL SPECIFICATIONS: External dimensions: height 85 cm, width 55 cm, depth 30 cm. Content: 80 l. Weight: 3.70 kg. Materials: fabric 1000D Cordura, polyester bands, metal buckles and Kroko zippers. Frame: DUR aluminium. Colour: olive green. WARRANTY AND WARRANTY: The product has a 10-year warranty against material and manufacturing defects. KEY FLAG PRODUCT: This Finnish Key Flag product is partially manufactured at our factory in Estonia, but more than 50 of its work is made in Finland. This product is no longer made by Savotta. The Savotta Jääkäri XL replaces this article.
  • Not in stock - on order
    LJK MODULAR A modular, heavy-duty backpack with external frame, designed for the Finnish Armed Forces in 2008. Capacity approx. 80 l. The modular LJK is designed to meet the needs of the armed forces for a modern military backpack. The characteristics and details are well thought out according to the needs of the 21st century without compromising durability and reliability in extremely heavy military use. The backpack can be customized to your needs with separate pockets and numerous attachment points. There's not much left of the old LJK backpack, except for the name, external frame design and a construction that can withstand pretty much anything. The compartments and structure of the entire backpack have been completely redesigned. The end result is more practical than before and considerably more versatile. The modular LJK has also proved to be a functional and reliable carrier when used by the Finnish armed forces and the Finnish border guard. A traditional backpack with external frame is at its best with a heavy load, but is also suitable for lighter trips. The external tube frame ensures air circulation between the pocket itself and the user's back, significantly reducing the heat load. Although anatomical backpacks have taken over some grass in the backpack market, there are still situations where nothing is better than an external frame backpack. Compartments The upper compartment of the bag (dimensions about 50 x 35 x 25 cm) is closed by attaching the opening of the drawstring, which is secured with a waterproof protective collar that also allows overpackaging. The opening is first covered with a attached straps and is then covered with a generous flap that is secured with buckle closures. The straps are long enough to wear, for example, a sleeping bag or mat under the flap. In addition to the buckles on the straps, there are spare metal buckles under the valve in the event of a worst case scenario. The top and lower compartments of the bag are separated by an intermediate shot that can open, allowing the whole bag to be changed to one large compartment if desired. In the upper compartment there is a mesh bag for small items. The pouch can also contain a wide hydration bladder and on each top corner of the backpack are exhausts for the hoses. The bottom compartment of the bag (dimensions approximately 35 x 35 x 25 cm) is closed with a two-way zipper that is secured with two buckles. The buckles should always be fastened because they take away some of the weight and strain the zippers. The side pockets (dimensions approximately 30 x 17 x 11 cm) open from the top with long zippers. The side compartments are removable and can be attached to the sides or back of the backpack at the necessary height. They can also be completely omitted if desired. The bags are attached to the backpack with MOLLE girders used in military equipment. It is a very simple, durable and reliable attachment method. OTHER ANCHORAGES There is a generous number of fastening loops on top of the valve and in the main compartment. This makes it possible to secure even large loads (such as the beloved Sissi tent) on or under the valve by means of detachable tires. The loops on the inside of the flap are perfect for attaching a sleeping mat. Especially a military-style tent mattress can be attached to this by means of the elastic bands. There are several belt loops on the sides and back of the backpack that can be attached to various essentials with detachable straps. The backpack comes with four two-piece buckles that can be moved freely between the backpack's attachment points. By default, they are used to strengthen the attachment of the side boxes. There is a lot of MOLLE webbing on top of the flap, on the sides, back and bottom of the bag and in the lower compartment for attaching additional pockets. You can also easily tie supplies to the girth using detachable straps. The lower corners of the bag have open pockets to attach long devices, e.g. an axe handle, to the side of the backpack. The lower corners of the shoulder straps have loops that serve as attachment points for small objects, such as water bottles. SUPPORT SYSTEM The frame of the support system is the strong aluminium tube frame of the LJK model. Unlike civilian backpacks, it has no upper bend because the bend easily sits in the head's way when it is necessary to move on rough terrain. Furthermore, the frame is reinforced with additional support blocks. The shoulder straps and waistband are firmly padded and anatomically shaped. In addition, the lower back is supported by a separate thick pillow. The buckle of the hip belt is a special plastic buckle that can be pulled in both directions and can be opened by pressing on the middle. The nodded chest strap provides extra comfort and support when wearing. The stepless adjustable (in length and width) supporting support support system and hip belt of the backpack can be adapted to users of all different heights and sizes. It is possible to adjust the center of gravity of the shoulder straps even while walking by tightening and loosening the straps attached to the top of the frame. The centre of gravity of the backpack itself between the shoulders and the hips is adjusted by loosening and tightening the shoulder straps and hip belt. TECHNICAL SPECIFICATIONS: External dimensions: height 80 cm, width 35 cm, depth 30 cm. Content: 80 l. Weight: 3.90 kg. Materials: 1000D Cordura, polyester band, special Delrin plastic buckles and Kroko zippers. Frame: DUR aluminium. Colour: olive green. WARRANTY AND WARRANTY: The product has a 10-year warranty against material and manufacturing defects. KEY FLAG PRODUCT: The product has a 10-year warranty against material and manufacturing defects. This product is no longer made by Savotta. The Savotta Jääkäri XL replaces this article.
  • The most basic accessory of any backpack is a pair of reliable packing straps, we offer a few different styles to meet your specific needs and preferences. The heavy, spring-loaded metal cam buckle is almost indestructible and allows you to use it in situations and tasks where a plastic buckle just isn't strong enough. BUCKLE AND LENGTH OPTIONS To meet specific needs and preferences, we offer a few different buckle options: 1) SR buckle: For most applications, the fast and light plastic buckle with side release (SR) is more than sufficient. No wonder this is the "standard" buckle for this type of belt worldwide. 2) CAM buckle: For really heavy use, a heavier metal cam buckle is a solid choice. There is a reason why the Finnish Defense gives each soldier a pack of belts that are virtually identical to this one. Length options, indicated as the maximum circumference of the object around which the belt can be looped, are 80 cm and 120 cm. The shorter 80 cm is sufficient for most of the stuff you want to attach to the outside of a backpack, sleeping bags and sleeping pillows etc. The 120cm is great for all kinds of bulk goods, field camp tent rollers, firewood etc, it's enough for pretty much anything you'll ever need it for. And hey, if the length is not enough you can always put it on a chain! KEY FEATURES
    • Suspension metal buckle
    • 25 mm (1") wide strap
    • Two length options: 80 cm and 120 cm
    • Package includes two straps
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • 80 cm: weight 52 g each
    • 120 cm: weight 62 g each
    • Main material: 100% polyester band
  • The most basic accessory of any backpack is a pair of reliable packing straps, we offer a few different styles to meet your specific needs and preferences. The heavy, spring-loaded metal cam buckle is almost indestructible and allows you to use it in situations and tasks where a plastic buckle just isn't strong enough. BUCKLE AND LENGTH OPTIONS To meet specific needs and preferences, we offer a few different buckle options: 1) SR buckle: For most applications, the fast and light plastic buckle with side release (SR) is more than sufficient. No wonder this is the "standard" buckle for this type of belt worldwide. 2) CAM buckle: For really heavy use, a heavier metal cam buckle is a solid choice. There is a reason why the Finnish Defense gives each soldier a pack of belts that are virtually identical to this one. Length options, indicated as the maximum circumference of the object around which the belt can be looped, are 80 cm and 120 cm. The shorter 80 cm is sufficient for most of the stuff you want to attach to the outside of a backpack, sleeping bags and sleeping pillows etc. The 120cm is great for all kinds of bulk goods, field camp tent rollers, firewood etc, it's enough for pretty much anything you'll ever need it for. And hey, if the length is not enough you can always put it on a chain! KEY FEATURES
    • Suspension metal buckle
    • 25 mm (1") wide strap
    • Two length options: 80 cm and 120 cm
    • Package includes two straps
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • 80 cm: weight 52 g each
    • 120 cm: weight 62 g each
    • Main material: 100% polyester band
  • The most basic accessory of any backpack is a pair of reliable packing straps, we offer a few different styles to meet your specific needs and preferences. The fast and light plastic buckle with side release (SR) is a sure choice for most applications. BUCKLE AND LENGTH OPTIONS To meet specific needs and preferences, we offer a few different buckle options: 1) SR buckle: For most applications, the fast and light plastic buckle with side release (SR) is more than sufficient. No wonder this is the "standard" buckle for this type of belt worldwide. 2) CAM buckle: For really heavy use, a heavier metal cam buckle is a solid choice. There is a reason why the Finnish Defense gives each soldier a pack of belts that are virtually identical to this one. Length options, indicated as the maximum circumference of the object around which the belt can be looped, are 80 cm and 120 cm. The shorter 80 cm is sufficient for most of the stuff you want to attach to the outside of a backpack, sleeping bags and sleeping pillows etc. The 120cm is great for all kinds of bulk goods, field camp tent rollers, firewood etc, it's enough for pretty much anything you'll ever need it for. And hey, if the length is not enough you can always put it on a chain! KEY FEATURES
    • Fast and light SR buckle
    • 25 mm (1") wide strap
    • Two length options: 80 cm and 120 cm
    • Package includes two straps
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • 80 cm: weight 40 g each
    • 120 cm: weight 50 g each
    • Main material: 100% polyester band
  • The most basic accessory of any backpack is a pair of reliable packing straps, we offer a few different styles to meet your specific needs and preferences. The fast and light plastic buckle with side release (SR) is a sure choice for most applications. BUCKLE AND LENGTH OPTIONS To meet specific needs and preferences, we offer a few different buckle options: 1) SR buckle: For most applications, the fast and light plastic buckle with side release (SR) is more than sufficient. No wonder this is the "standard" buckle for this type of belt worldwide. 2) CAM buckle: For really heavy use, a heavier metal cam buckle is a solid choice. There is a reason why the Finnish Defense gives each soldier a pack of belts that are virtually identical to this one. Length options, indicated as the maximum circumference of the object around which the belt can be looped, are 80 cm and 120 cm. The shorter 80 cm is sufficient for most of the stuff you want to attach to the outside of a backpack, sleeping bags and sleeping pillows etc. The 120cm is great for all kinds of bulk goods, field camp tent rollers, firewood etc, it's enough for pretty much anything you'll ever need it for. And hey, if the length is not enough you can always put it on a chain! KEY FEATURES
    • Fast and light SR buckle
    • 25 mm (1") wide strap
    • Two length options: 80 cm and 120 cm
    • Package includes two straps
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • 80 cm: weight 40 g each
    • 120 cm: weight 50 g each
    • Main material: 100% polyester band
  • Not in stock - on order
    RAIN COVER L A good waterproof rain cover for larger backpacks (approx. 60-70 liters), such as the Jääkäri L. Made of strong and waterproof PU-coated 70D polyamide ripstop material. A strong, adjustable elastic cord runs along the edge of the cover and ensures a good fit over packages of different sizes. The elastic cord can also be used to store the cover when not in use - simply roll up the cover into a tight beam and use the cord loop to secure it. For larger backpacks with added side pockets, we recommend the larger Rain Cover XL. TECHNICAL DETAILS: Material: 70D polyamide ripstop, with PU coating Colour: olive green Weight: 120 grams Compatible with: Jääkäri L and similar backpacks of 60-70 liters WARRANTY AND WARRANTY: The product has a 1-year warranty for material and manufacturing defects. FINNISH KEY FLAG PRODUCT: All our tents and backpack frames are made in Karstula, Finland. Textile sewing is done in both our factories in Finland and Estonia. All our products have been awarded the Finnish Key Flag symbol, a feature of Finnish production.
  • RAIN COVER M A good waterproof rain cover for medium day backpacks (approx. 30-40 liters), such as the Jääkäri M. Made of strong and waterproof PU-coated 70D polyamide ripstop material. A strong, adjustable elastic cord runs along the edge of the cover and ensures a good fit over packages of different sizes. The elastic cord can also be used to store the cover when not in use - simply roll up the cover into a tight beam and use the cord loop to secure it. For medium-sized backpacks with added side pockets, we recommend the larger rain cover L. TECHNICAL DETAILS: Material: 70D polyamide ripstop, with PU coating Colour: olive green Weight: 90 grams Compatible with: Jääkäri M and similar backpacks of 30-40 liters WARRANTY AND WARRANTY: The product has a 1-year warranty for material and manufacturing defects. FINNISH KEY FLAG PRODUCT: All our tents and backpack frames are made in Karstula, Finland. Textile sewing is done in both our factories in Finland and Estonia. All our products have been awarded the Finnish Key Flag symbol, a feature of Finnish production.
  • RAIN COVER S A good waterproof rain cover for smaller day backpacks (up to about 20 liters), such as the Jääkäri S. Made of strong and waterproof PU-coated 70D polyamide ripstop material. A strong, adjustable elastic cord runs along the edge of the cover and ensures a good fit over packages of different sizes. The elastic cord can also be used to store the cover when not in use - simply roll up the cover into a tight beam and use the cord loop to secure it. For small backpacks with added side pockets we recommend the larger rain cover M. TECHNICAL DETAILS: Material: 70D polyamide ripstop, with PU coating Colour: olive green Weight: 80 grams Compatible with: Jääkäri S and similar backpacks of 15-20 liters WARRANTY AND WARRANTY: The product has a 1-year warranty for material and manufacturing defects. FINNISH KEY FLAG PRODUCT: All our tents and backpack frames are made in Karstula, Finland. Textile sewing is done in both our factories in Finland and Estonia. All our products have been awarded the Finnish Key Flag symbol, a feature of Finnish production.
  • RAIN COVER XL A good waterproof rain cover for larger backpacks (approx. 80-100 liters), such as the Jääkäri XL. Made from strong and waterproof PU-coated 70D polyamide ripstop material. A strong, adjustable elastic cord runs along the edge of the cover and ensures a good fit over packages of different sizes. The elastic cord can also be used to store the cover when not in use - simply roll up the cover into a tight beam and use the cord loop to secure it. This rain cover is widely designed for extra equipment such as sleeping mats and extra side pockets. TECHNICAL DETAILS: Material: 70D polyamide ripstop, with PU coating Colour: olive green Weight: 180 grams Compatible with: Jääkäri XL and similar backpacks of 80-100 liters WARRANTY AND WARRANTY: The product has a 1-year warranty for material and manufacturing defects. FINNISH KEY FLAG PRODUCT: All our tents and backpack frames are made in Karstula, Finland. Textile sewing is done in both our factories in Finland and Estonia. All our products have been awarded the Finnish Key Flag symbol, a feature of Finnish production.
  • Not in stock - on order
    Border controls A classic from 1989, known in Finnish as the Rajapartio, originally designed for the Finnish border guard. An internal tubular aluminium frame helps to carry unwieldy and heavy loads. What is special is that the Rajapartio backpack has attachment points for a rifle on the outside. Originally designed to carry an assault rifle, the attachment points can also be used very well to attach, for example, a camera tripod or other long special supplies. Compartments The upper main compartment (dimensions approximately 45 x 35 x 22 cm) is closed by attaching the opening of the drawstring, which is secured with a waterproof protective collar that also allows overpackaging. The opening is covered with a large flap that is secured with straps. The generous length of the straps offers plenty of space under the flap to overpack. In the flap is a large, open pouch. When the valve is closed, the opening of the bag is facing upwards and closes so that the contents do not fall. Against the back in the bag is a pocket the size of the entire back for the supporting frame of the backpack. The compartment is also ideal for carrying, for example, a water bag or other flat stuff. The lower compartment of the bag (dimensions about 15 x 35 x 20 cm) is closed with a two-way zipper and fastened with the same straps used to close the flap of the backpack itself. The side compartments (dimensions approximately 30 x 15 x 6 cm) are sealed with waterproof protective collars and covered with flaps that can be secured with straps. The side pocket on the left also has a vertical zipper which makes the contents of the box quickly accessible. OTHER ANCHORAGES On the flap at the back of the backpack and at the bottom of the bag you will find fastening loops to carry a rifle. The loops are also equally suitable for carrying other exceptionally long devices. The load is secured by tightening a belt that encloses the entire backpack. There are attachment points for detachable straps on top of the flap. Large essentials that otherwise do not fit in the backpack can be fastened on top of the flap. The side compartment on the right is tunnel-shaped and there is a mounting point above for a detachable belt. For example, it can easily hold an axe. SUPPORT SYSTEM The wide, anatomically shaped, sturdy shoulder straps and the well-padded hip belt ensure supported and comfortable wearing. The buckle of the hip belt can be detached very quickly with one hand. A very valuable function in a possible emergency. With the support handle on the top, the backpack is also easy to carry by hand. The back is reinforced with an internal, square tube frame made of DUR aluminum. This lightweight frame keeps the backpack upright and is comfortable to carry, even with a slightly heavier load. The support frame can also be removed from the backpack if desired. TECHNICAL SPECIFICATIONS: External dimensions: height 65 cm, width 50 cm, depth 25 cm. Content: approximately 60 l. Weight: about 2.00 kg. Materiaal: 1000D Cordura Frame: DUR aluminium. Colour: olive green. WARRANTY AND WARRANTY: The product has a 5-year warranty against material and manufacturing defects. KEY FLAG PRODUCT: This Finnish Key Flag product is partially manufactured at our factory in Estonia, but more than 50 of its work is made in Finland.
  • Savotta Rolltop Stuffsack mesh

    20,9034,90
    Somewhat transparent, totally non-waterproof and just neat in many ways, these packing bags are made of a strong mesh fabric. Designed to store, transport and organize all kinds of equipment and items. Because they are made of a mesh fabric, they work very differently from most packaging bags and offer very different functions. There are things in this world that you don't want to pack, transport or store tightly in water or air, mesh does just that. As a bonus mesh, you can see through it, which helps identify the contents of each bag if you have a bunch of these with different gears. Use cases: - By putting wet equipment in it, the mesh allows the contents to dry out. - Clear color coding of your spare clothing in your bag or backpack. - Storage of equipment that you want to "breathe". Attributes
    • Clear mesh construction
    • Rolltop closure with SR buckle
    • Available in a range of sizes from 5 to 40 litres
    • 5-year material and manufacturing warranty
    • Made in Finland &Estonia
    Technical specifications
    • 5L: weight 100 g, flat dimensions 22 x 41 cm (W x L)
    • 10L: weight 140 g, flat dimensions 30 x 52 cm (W x L)
    • 20L: weight 195 g, flat dimensions 37 x 63 cm (W x L)
    • 40L: weight 320 g, flat dimensions 51 x 87 cm (W x L)
    • Materials: Mesh: 100% polyester Webbing: 100% polyester
  • Not in stock - on order

    FDF DROP LEG PANEL

    Can be attached to a belt or carrying vest, originally designed for and currently in use by the Finnish Armed Forces. SR buckles for quick fast fast attachment and decoupling allow the user to easily scale their worn equipment up or down, quite commonly used as a support platform for gas masks. The internal padding and friction material against the leg guarantee a level of comfort and prevent the platform from moving too much. KEY FEATURES
    • PALS-compatible fastening strap
    • Attached via adjustable belt loops with SR buckles
    • Partially elastic thigh band with SR buckle
    • Internal padding for comfort
    • Friction material on the inside
    • 2-year warranty on material and craftsmanship
    • Finnish Key Flag product
    TECHNICAL SPECIFICATIONS Weight: 230 grams Main material: 1000D Cordura
  • Not in stock - on order
    A classic retro backpack for a hunter; the design has remained unchanged since the 1950s. After making something that works once, why fix the design if it is not broken! Just as great for hunting, camping and the city today as it was 60 years ago.
    Due to its size, the 323 saddle sack is ideal for one or two day hunting trips: the backpack holds the necessary overnight equipment, provisions and other useful gadgets and tools comfortably. Once upon a time when men were made of steel and women as tough as nails, you could survive for weeks just with the saddle sack (or months, if you ask remote patrollers who served in wars), sleeping in the wilderness and eating what nature has to offer. Although the needs of a modern camper are different, a good backpack design is still a good backpack design. The traditional saddle sack is as fine a carrying device as it ever was, and it has the sort of a romantic retro vibe that you just cannot find in contemporary backpacks.

    COMPARTMENTS

    The main compartment of the bag (dimensions approximately 45 x 35 x 25 cm) is closed by tightening the opening which is covered with a flap that can be secured with leather straps. The straps are long enough to attach, for example, a rolled sleeping mat or blanket under the flap. If necessary, additional detachable straps can be used to lengthen the straps. The size of the main compartment of the backpack is large enough to fit even a heavy winter sleeping bag inside. The side pockets (dimensions approximately 33 x 10 x 6 cm) are closed with fitted flaps with good coverage and secured with leather straps. The side pockets are ideal for packing large Thermos flasks and other cumbersome, long supplies. The back pocket (dimensions approximately 20 x 30 x 6 cm) is closed with a flap equipped with two leather straps. You can pack plenty of small supplies into the generously sized outer pocket for quick and easy Access.

    OTHER ATTACHMENT POINTS

    There are attachment loops on the sides of the opening for detachable straps. By using straps, it is possible to attach long rolls, such as a blanket or a sleeping mat, securely on top of the bag. Ensure sturdy attachment by closing the flap of the bag over the roll.

    CARRYING SYSTEM

    A special feature of the saddle sack is its steel pipe frame which enables steady and comfortable carrying. The sturdy frame holds the bag firmly in shape and the horizontal leather strap stretched across the lower part of the frame sits comfortably against your lower back, keeping the bag itself from touching your back. The shoulder straps are wide leather straps, the length of which can be adjusted with buckles. Because of the steel pipe frame, it is much more comfortable to carry the saddle sack than a frameless backpack, particularly over long distances and with a heavy load.

    TECHNICAL SPECIFICATIONS:

    External dimensions: height 45 cm, width 45 cm, depth 25 cm. Capacity: approximately 50 l. Weight: approximately 1.40 kg. Materials: paraffin-treated cotton, vegetable-tanned leather and steel buckles. Frame: steel pipe. Colour: olive green with black leather parts.

    WARRANTY AND GUARANTEE:

    The product has a 5-year guarantee against material and manufacturing defects.

    KEY FLAG PRODUCT:

    This Finnish Key Flag product is partly manufactured on our factory in Estonia, however more than 50 % of its work is made in Finland.
  • Savotta Side pouch 12L

    54,9064,90
    Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. The two vertical fastening straps leave an approx. 9 cm wide gap, so you can carry items such as axes, fishing sticks, etc. behind the pouch. Optimal attachment requires a width of four channels and a height of six (min. five) rows of PALS webbing. The compression straps on the side of the backpack, when put on, will prevent any movement of the backpack and its contents. Of our own packs, we recommend the 12L side bag only for the Jääkäri XL. While this is not recommended, you can also make the bag suitable for smaller bags with an absolute minimum of six rows of PALS webbing on the sides, by attaching the bag a step higher and accepting that the bottom becomes a little limp. Examples of use With a capacity of twelve liters, this is a very large side bag, the PALS attachment is five channels wide. Best used on large and high backpacks of 70-100+ liters. Here are some examples of what will fit in such a bag:
    • A tarp, hammock, duvet and accessories.
    • A lightweight puff coat, pants and rainwear
    • A Trangia 27 series stove, fuel, water and lots of stuff to cook.
    • A Jetboil cooker, a few gas cartridges, water and lots of cooking utensils.
    • A few days of rations and snacks
    • A week of spare underwear, intermediate layers and socks.
    • All kinds of big special stuff that you need to take with you.
    Key features
    • Capacity approx. 12 litres
    • Covered zipper
    • Front vertical loops for compression straps
    • Internal D-ring for attaching small items
    • Internal flat rear compartment
    • Reinforced bottom and sides
    • PALS-compatible mounting system
    • Water drainage opening at the bottom
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    Technical specifications
    • Weight: 320 g
    • Dimensions: 21 x 45 x 12 cm (W x L x D)
    • Main material: 500D Cordura (100% polyamide)
    • Lining: 210D polyamide
    • Webbing: 100% polyester
  • Savotta Side pouch 4L

    44,9548,95
    Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. Examples of use As a fairly small pouch with only four liters of capacity, no big things fit in here, but this also makes them very suitable for use on small backpacks with limited height / width on the sides. Here are some examples of what will fit in such a bag:
    • A medium-sized tarp and accessories
    • A lightweight puffy jacket, rain suit or poncho
    • A regular 1.5 liter bottle, and some other stuff
    • An isolated food pot of 0.7 liters
    • A Jetboil burner and a gas cartridge
    Key features
    • Capacity approx. 4 litres
    • Covered zipper
    • Vertical front signalling loops for compression straps
    • Internal D-ring for securing small items
    • Internal flat rear compartment
    • Reinforced bottom and sides
    • PALS-compatible mounting system
    • Water drainage tulip at the bottom
    • 5-year warranty on material and craftsmanship
    • Made in Finland/Estonia
    Technical specifications
    • Weight: 200 g
    • Dimensions: 13 x 30 x 9 cm (W x L x D)
    • Main material: 500D Cordura (100% polyamide)
    • Lining: 210D polyamide
    • Webbing: 100% polyester
  • Savotta Side Pouch 6L

    44,9052,90
    Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. The two vertical fastening straps leave an approx. 9 cm wide gap, so you can carry items such as axes, fishing sticks, etc. behind the pouch. Optimal attachment requires a width of four channels and a height of six (min. five) rows of PALS webbing. The compression straps on the side of the backpack, when put on, will prevent any movement of the backpack and its contents. The 6-litre side bag fits all our Jääkäri backpacks. For backpacks with less than six rows of PALS webbing on the sides, the bottom of the bag "hangs". You can have this absorbed by the compression straps on the sides, or you can choose to attach the pouch one step higher to the side of the backpack. Examples of use With a capacity of six liters, this is a medium-sized bag, not small, not large. Something you would expect with a backpack of 30-80 liters. Here are some examples of what will fit in such a bag:
    • A large tarp and accessories
    • A hammock and duvet
    • A lightweight puff jacket and pants or rain gear
    • Two regular 1.5 litre drink bottles
    • A Trangia 27 Series stove, fuel and some stuff to cook
    • A Jetboil stove, a gas cartridge, water and some stuff to cook
    • 24 hour rations and snacks
    Key features
    • Capacity approx. 6 litres
    • Covered zipper
    • Front vertical loops for compression straps
    • Internal D-ring for attaching small items
    • Internal flat rear compartment
    • Reinforced bottom and sides
    • PALS-compatible mounting system
    • Water drainage opening at the bottom
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    Technical specifications
    • Weight: 240 g
    • Dimensions: 17 x 35 x 9 cm (W x L x D)
    • Main material: 500D Cordura (100% polyamide)
    • Lining: 210D polyamide
    • Webbing: 100% polyester
  • Savotta Side pouch 8L

    49,9059,90
    Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. The two vertical fastening straps leave an approx. 9 cm wide gap, so you can carry items such as axes, fishing sticks, etc. behind the pouch. Optimal attachment requires a width of four channels and a height of six (min. five) rows of PALS webbing. The compression straps on the side of the backpack, when put on, will prevent any movement of the backpack and its contents. The 6-litre side bag fits all our Jääkäri backpacks. For backpacks with less than six rows of PALS webbing on the sides, the bottom of the bag "hangs". You can have this absorbed by the compression straps on the sides, or you can choose to attach the pouch one step higher to the side of the backpack. Examples of use With an eight-liter capacity, this is clearly a larger side bag, which is perhaps best used on large and high backpacks of 60-100+ liters. Here are some examples of what will fit in such a bag:
    • A large tarp, hammock and accessories
    • A hammock and duvet
    • A lightweight puff jacket and pants or rain gear
    • A Trangia 27 series stove, fuel, water and lots of stuff to cook
    • A Jetboil cooker, a gas cartridge, water and lots of cooking utensils
    • More than 24 hours of rations and snacks
    • Almost a week's worth of spare underwear, interlayers and socks.
    Key features
    • Capacity approx. 8 litres
    • Covered zipper
    • Front vertical loops for compression straps
    • Internal D-ring for attaching small items
    • Internal flat rear compartment
    • Reinforced bottom and sides
    • PALS-compatible mounting system
    • Water drainage opening at the bottom
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    Technical specifications
    • Weight: 270 g
    • Dimensions: 17 x 40 x 11 cm (W x L x D)
    • Main material: 500D Cordura (100% polyamide)
    • Lining: 210D polyamide
    • Webbing: 100% polyester
  • Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties
    • Three sizes: 10×15, 15×20 and 20×30 cm
    • Translucent mesh material
    • Zipper from corner to corner
    • Two 25 mm wide webbing loops in the corners
    • Color options for easy recognition
    • Velcro fastener (hook back) or plain (stand-alone)
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    Technical characteristics
    • Weight: - Hook back 10×15 cm: 37 g - Hook back 15×20 cm: 64 g - Hook back 20×30 cm: 90 g
    • Main material: 100% polyester
    • Webbing: 100% polyester
  • Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties
    • Three sizes: 10×15, 15×20 and 20×30 cm
    • Translucent mesh material
    • Zipper from corner to corner
    • Two 25 mm wide webbing loops in the corners
    • Color options for easy recognition
    • Velcro fastener (hook back) or plain (stand-alone)
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    Technical characteristics
    • Weight: - Standalone 10×15 cm: 32 g - Standalone 15×20 cm: 54 g - Standalone 20×30 cm: 76 g
    • Main material: 100% polyester
    • Webbing: 100% polyester
  • Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties
    • Three sizes: 10×15, 15×20 and 20×30 cm
    • Translucent mesh material
    • Zipper from corner to corner
    • Two 25 mm wide webbing loops in the corners
    • Color options for easy recognition
    • Velcro fastener (hook back) or plain (stand-alone)
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    Technical characteristics
    • Weight: - Hook back 10×15 cm: 37 g - Hook back 15×20 cm: 64 g - Hook back 20×30 cm: 90 g
    • Main material: 100% polyester
    • Webbing: 100% polyester
  • Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties
    • Three sizes: 10×15, 15×20 and 20×30 cm
    • Translucent mesh material
    • Zipper from corner to corner
    • Two 25 mm wide webbing loops in the corners
    • Color options for easy recognition
    • Velcro fastener (hook back) or plain (stand-alone)
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    Technical characteristics
    • Weight: - Standalone 10×15 cm: 32 g - Standalone 15×20 cm: 54 g - Standalone 20×30 cm: 76 g
    • Main material: 100% polyester
    • Webbing: 100% polyester
  • Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties
    • Three sizes: 10×15, 15×20 and 20×30 cm
    • Translucent mesh material
    • Zipper from corner to corner
    • Two 25 mm wide webbing loops in the corners
    • Color options for easy recognition
    • Velcro fastener (hook back) or plain (stand-alone)
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    Technical characteristics
    • Weight: - Hook back 10×15 cm: 37 g - Hook back 15×20 cm: 64 g - Hook back 20×30 cm: 90 g
    • Main material: 100% polyester
    • Webbing: 100% polyester
  • Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties
    • Three sizes: 10×15, 15×20 and 20×30 cm
    • Translucent mesh material
    • Zipper from corner to corner
    • Two 25 mm wide webbing loops in the corners
    • Color options for easy recognition
    • Velcro fastener (hook back) or plain (stand-alone)
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    Technical characteristics
    • Weight: - Standalone 10×15 cm: 32 g - Standalone 15×20 cm: 54 g - Standalone 20×30 cm: 76 g
    • Main material: 100% polyester
    • Webbing: 100% polyester
  • The Savotta Utility Pouch Mini can be attached to backpacks, tactical belts and the like using the Pals/Molle loops. It offers you space for the little things of everyday life or for a smartphone, compass, weapon cleaning kit, spare batteries or a first aid kit. The bag can be opened quickly and easily with the zipper. - Made in Finland - NSN 8465-58-000-3652 - Universal bag -Zipper - Drainage eye at the bottom - PALS / Molle loops Material: - Backpack: 100% Polyamide, Cordura 1000 den - Webbing: 100% Polyester - Dimensions: 12 x 10 x 6 cm
  • Savotta Vertical pocket L

    42,9049,00

    VERTICAL POUCH L

    6 l multifunctional zippered bag. PALS-compatible attachment, designed for use with backpacks. TECHNICAL SPECIFICATIONS:
    • External dimensions: height 30 cm, width 17 cm, depth 12 cm.
    • Capacity bag closed: 6 liters.
    • Materials: 1000D Cordura (M05: Foxdura) PUR coating.
    • PALS attachment: height 3, width 4, two attachments 28 cm
    • Weight: 165 grams
    Warranty: The product has a 2-year warranty for material and manufacturing defects.
  • VERTICAL POUCH S

    2 l multifunction bag with zipper. PALS-compatible attachment, designed for use with backpacks. TECHNICAL SPECIFICATIONS: External dimensions: Height: 24 cm, width: 14 cm, depth: 6 cm Pocket contents closed: 2 l Material: PUR-coated 1000D Cordura PALS fastening: height 3, width 3, fasteners 2 pieces 30 cm Weight: 120 grams Colour: olive green and black Warranty: The product has a 2-year warranty for material and manufacturing defects. KEY FLAG PRODUCT: This is a Finnish Key Flag product, which means that more than 50% of the production work is carried out in Finland. Some of the work is outsourced from our factory in Estonia.
  • VERTICAL POUCH M

    4 l multifunctional zippered bag. PALS-compatible attachment, designed for use with backpacks. TECHNICAL SPECIFICATIONS:
    • External dimensions: Height: 26 cm, width: 17 cm, depth: 9 cm
    • Bag content closed: 4 l
    • Material: PUR-coated 1000D Cordura
    • PALS attachment: height 3, width 4, fastenings 2 pieces 30 cm
    • Weight: 150 grams
    • Colour: olive green and black
    WARRANTY AND WARRANTY: The product has a 2-year warranty for material and manufacturing defects. KEY FLAG PRODUCT: This Finnish Key Flag product is partly manufactured at our factory in Estonia, but more than 50% of the work is made in Finland.
  • 30 years of experience in building large military backpacks. The main upgrade is the new "Herma" buckle, a buckle that is both brand and female in one buckle. That makes it possible to attach it wherever you want. No more searching for the right buckle to connect with. The depth of the backpack is small, but the width and lengths are long to carry what you need, but to be as close to your body as possible makes it easier to carry it. Shaped to sit nice and tight along the back. Stiff head hole and cut out in the lid so you can lean your head back when carrying the backpack. Shoulder pads are made of foam plastic and 1mm hard plastic for comfort and an even balance of weight. They have a chest strap and handset/microphone attachment. The main compartment has a large U-shaped opening with zipper to access the upper part of the backpack. The opening is covered with PALS on the outside. The sleeping bag compartment in the bottom of the backpack is also accessible through a U-shaped opening in the bottom of the backpack. This compartment is made variable in size so that a large sleeping bag fits in it. Two removable 11-litre side pockets with zippered opening on both sides that are accessible when you're on the backpack or in the tent. The side pockets can be connected as a backpack or worn separately. Top cover that can also be worn as a hip bag or small backpack. The top cover is designed to carry a spare sweater, mines, a drinking system, your administration book or something similar. 3L Zippered lid pocket for flashlights, spare batteries, insect repellent etc. Holder for a helmet, your poncho or something similar on top of the lid. Hip belt with plastic layer and sturdy foam for comfort and stability. It has steel O-rings so that a sled can be attached to it. The hip belt is attached in the middle, allowing you to move freely. Sled attachment points on the hip belt. Velcro patch for marking the owner. Roll up the ends of all the tires. The frame has been enhanced with a stiffer construction to make carrying the backpack even more comfortable. Size 100L Model: 29-01161C09-100 Weight: 5000 g Dimensions: 85 × 36 × 20 cm Color: Grey  
  • The Snigel Snigel 15-20L all pack is a lightweight backpack that can be used in many different ways. In fact, it's a simple package with a semi-covered zippered opening. It has MOLLE/PALS tires at the front. The inside is covered with Velcro, so our pockets can be attached there (pockets not included). Elastic cord compression on the sides Outside Velcro stripes so you can attach your markings. The package can be attached to our large backs, on our ballistic and non-equipment vests. It can also be worn alone. Fits inside: All types of equipment; radio, medical supplies or personal equipment. It may be:
    • Worn as a shoulder bag.
    • Worn as a backpack.
    • Wear around your waist.
    • Attached to an equipment vest or a plate carrier with I-bars.
    • Attached to a large backpack
    Specifications:
    • Weight: 860 grams
    • Volume: 10-20L
    • Dimensions: 45 x 30 x 10 cm
    • Colors: Gray, Multicam
  • Not in stock - on order
    The new Velcro insert panel with much improved ways to be used. This panel makes it possible to attach the insert pockets in the Specialist backpack. Two sizes, one for the 30L and one for the 40L Specialist backpack. Attaches to the Specialist backpack with press studs Surface covered with Velcro loops Holes are punched into the panel, and the elastic cord that comes with the panels can be threaded through the holes to secure the equipment. Attach only one long side and reach the pockets under the panel Fits in: Anything – medical equipment, technical equipment, or personal items Beware: In the Specialist backpack Weight: 80 g Dimensions: 43 × 28 × 1 cm Contents and backpack not included. Just for illustrative purposes.
  • A very light and waterproof backpack. Packed, it takes up only 2 liters of space. It is completely waterproof with taped seams and a roll closure at the top. Two flat 50 mm wide shoulder straps and one chest strap. Rolled ends on all tires to keep them tight. M7810-116011 KOMBI RYGGBRÄDA T, Kolli 2 Size: 30L. Dimensions: W=27, H=50 & D=18 cm. Weight: 340 g
  • The updated version of our 50L Mission backpack. The main upgrade is the new "Herma" buckle, a buckle that is both brand and female in one buckle. That makes it possible to attach it wherever you want. No more trying to find the right buckle to connect with. The interior is colored light gray to make it easier to find what you're looking for without becoming a beacon, visible to the enemy. A classic backpack with a lid. Designed to match the natural shape of your spine. The lid can be removed and used as a hip bag. It has an outer and inner zippered pocket and an elastic shock cord at the top. Roll top opening/closing in the main compartment keeps snow and dirt out. The bag has a frame with a plastic plate and aluminum bars on the back to make it sturdy, but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. They have a chest strap. Inner pocket and hanger for a drinking system. MOLLE strap on the sides of the backpack, to which more pockets can be attached. Two side pockets (26-02140A0-000) can be attached to the backpack with zippers (not included). On the back of the backpack, we added a holder that can be hidden inside the backpack or exposed to a helmet or other large piece of equipment. Padded hip belt with MOLLE strap to attach pockets. The belt can also be used as a lightweight combat belt. The hip belt is adjustable in height. Roll up the ends of all the straps to keep them tight. The Spoon sleeve, Double spoon garage and Curved Spoon are not included in the backpack. The pair of side pockets is not included in the backpack. Content: 50L. Article number: 29-00160B09-000 Weight: 2200 g Dimensions: 70 × 35 × 20 cm Color: Grey All fabrics, buckles and straps are IRR compatible!
  • Not in stock - on order
    Capacity = 50 litres Fits: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, plug-in optics or personal equipment for 24-48 hours Beware: Can be worn in the hand, over the shoulder or on the back. functions: A sturdy, reliable and versatile backpack for storing and transporting sensitive/sensitive equipment. The backpack can be custom made by the user for radio, first aid, photo kit/surveillance or technical equipment. The bag has a ventilated back with a plastic plate and an aluminum support on the back to make it sturdy but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. They have a chest strap and handset/microphone attachment. Thick padded waistband. The bag is made of wear-resistant coated polyamide and has a sturdy zipper. Long heavy zipper with long drawstrings. The zippers are long so that the backpack can be fully opened. 4 compression straps on the side are sewn to the backpack. The loose ends of the side compression straps roll up and are fastened with Velcro. The bag has one carrying handle on the top. Main compartment has 2 inner pockets with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment. The outer pockets have a zipper and they each have an elastic mesh pocket with zipper on the inside for the different things you need to store. The lower compartment is suitable for 15" field laptop/computer or supplement/replacement clothing. MOLLE webbing to attach bags/bags for first aid equipment, holders for radios etc. are placed on the outside of the outer pockets. An optional medical wall can be mounted with straps in the middle of the backpack. The wall remains vertical when the backpack is open. A man pack radio can be secured with two straps close to your back for the best weight distribution and balance. Two holes for cables or a tube are placed at the top of the backpack in front of the drinking system. Optional set of plug-in bags (65-01290A00-888) is ideal for organizing in the backpack for medical equipment. Optional rain cover in grey (65-01736A09-000) Optional snow cover in white (65-01736A26-000)
  • The tie-down strap that attaches to our 90-130 liter backpacks and connects the long spoon to the double spoon garage on the combat belt. This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. The outer compartment of the double spoon garage 2.0 connects to the backpack with the curved long spoon, which is placed in the adjustable spoon sleeve. *Atmospheric photos and additional material for illustrative purposes only. Not included in the package.
  • An A4 paper storage and carrying case. Internal compartments for pencils, papers and other administrative items. Internal window box for cards or paper. Water repellent and strong to protect the content. MOLLE tires and Velcro at the front. Handle at the top. Size: A4+. Internal compartments for laptop charger and mouse. Internal compartment for a laptop. Outer compartment with zipper at the back.
  • The adjuster makes it easy to adjust the size of the equipment strap when changing from heavy winter clothing to light summer clothing Attach it to the right side of the belt and then thread it through the buckle The buckle is still on the left side and you use the belt as you are used to The safety belt is used as usual on top of the adjuster Dimensions: 22 x 5 Beware: 50 mm equipment straps
  • Snigel Combat Belt-12

    106,99124,95
    A padded belt with 2 MOLLE bands sewn on the outside for a comfortable carrying of any type of pouch or holster. The MOLLE bands are sewn on 8 cm wide panels with slots between the panels. The inner belt can be placed on the outside of one or more panels so a pistol holster can be worn. An inside 25 mm band is sewn under the panels, use it to attach a leg panel if you need to. It prevents the band from the leg panel from blocking other pouches on the belt itself. On the inside of the belts foam ridges are sewn to improve ventilation and comfort. They also make the belt fit snugly on the body. In the top of the belt, loops are sewn so you can attach a harness or similar. Ballistic panels can be inserted inside the belt. Remove the waist band and use the riggers belt to combine the features of both belts. A 3 point security buckle, prevents unwanted opening. The belt adjuster can be used on this belt.
    • Weight: 500 g
    • Small: 76-105cm
    • Medium: 85-115 cm
    • Large: 95 -125 cm
    • XLarge: 105-135 cm
  • An equipment belt system with an inner and an outer belt. The 38 mm wide inner belt is carried in the trousers and the outer 38 mm wide belt is attached on the inner belt with velcro. The equipment pouches are attached on the outer belt. Sizes: S= 73-98 cm, M= 81-106 cm, L= 89-114 cm, XL= 97-122 cm, XXL= 105-120 cm, XXXL= 113-138 cm
  • The long curved spoon connects the spoon garage on the belt to the backpack. This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. The garage is attached to the combat belt. The outer compartment connects to the backpack. The outer compartment of the double spoon garage 2.0 connects to the backpack with the curved long spoon, which is placed in the adjustable spoon cover. The curved spoon moves with your hips to allow the legs to move freely through the backpack, minimizing energy consumption in your body.
  • This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. It also has a quick-release buckle so you can quickly shed your backpack if you need to. The garage attaches to the combat belt to connect to the Squeeze plate carrier or vest in the inner pocket. The outer compartment connects to the backpack. The connecting piece is the long spoon or/and the curved long spoon. The long and long curved spoons are not included in the double spoon garage 2.0. *Atmospheric images and additional material for illustrative purposes only.
  • Not in stock - on order
    keeps your personal belongings dry in the backpack.
    • 100% waterproof.
    • Roll up the ends with a buckle on the side.
    • Velcro patch that can be removed to mark the contents of the bag.
    • Three bags in the set, small, medium and large for different items.
    • Store and protect all your belongings in the backpack.
    • Better than one big waterproof bag for backpacks with zipper openings and outer pockets.
    • The largest bag contains your sleeping bag or spare clothing and is 70 cm high and 36 cm wide.
    • The middle bag is 52 cm long and 26 cm wide.
    • The smallest bag is 42 cm high and flat 20 cm wide.
    Specifications:
    • Article number: 26-01082A09-000
    • Weight: 200g
    • Dimensions: 30 x 5 x 5 cm
    • Colour: Grey
  • The Snigel GP Pouch 3 2.0 has a removable elastic cord and a pull tab to facilitate use. A light pouch for general use to store small objects. The pouch is designed to be light and take up as little space as possible, while remaining strong enough for military use. Elastic band on the pouch to keep the contents safe even when the valve is open. Pull tab on the flap to open it easily, even with gloves on. Velcro flap and pull tab for easy opening The flap can be slid into the pouch and secured with Velcro, making it easier to access the items you carry in the case. Drain hole at the bottom. Thanks to the folding system, the pouch can be attached to any vest or belt. The bag has foldable Velcro straps at the back so that the bag can be worn horizontally on the belt. To wear it vertically, use the quiet and easy-to-use fold back system on the back of the case. This system makes it possible to attach the pouch without removing other pouches from the belt. Capacity: 0,2L Fits: Pepper spray short, short wide flash bulbs, distraction grenades, 40mm grenades, GPS, cell phone Fits: Equipment vest, belt, leg plate or leg mount.
  • Snigel GP pouch 3 long 2.0

    24,9529,95
    KEY FEATURES
    • The case is designed to be as lightweight and take up as little space as possible, while remaining strong enough for military use.
    • Velcro closed flap with pull tab on the flap for easy opening even with gloves on.
    • Velcro loop on the lid for a small patch.
    • The flap can be pushed into the pocket for easier access to the thing you're carrying in the pouch.
    • Elastic cord, on the pouch to hold the contents even when the valve is open. The cord can be removed.
    • Bottom drain hole.
    • Fold back fastening system makes it possible to attach the bag to any equipment, vest or belt.
    • It has Velcro straps on the back so that it can be worn horizontally on the belt.
    FITS IN
    • CAT turnstile
    • long 40 mm grenades
    • Pepper spray
    • Mobile phone
    • Lamps
    • Multi-tool
    • Other objects of similar size
    VERSIONS
    • 21-01855A01-013 Black
    • 21-01855A09-013 Grey
    material
    • 100% Nylon -FR PU coated
    • All fabrics and webbings are IRR compliant.
    Dimensions H=15, W=4, D=4 cm WEIGHT 50 g
  • Kenmerken: The I-Bar is mounted where you want to attach your backpack, bag or Specialist backpack small. It can be mounted on any backpack, vest or sternum.

    How to assemble:

    1. Thread the strap under the strap on the platform where you want it to be.
    2. The strap should be laced in the direction the buckle should be pointing when attached.
    3. Pull the strap through the front hole of the buckle
    4. Pull the strap through the rear hole of the buckle
    5. Adjust the length of the belt
    6. Fasten the Velcro
    7. Pull the buckle to make sure it's secure
    8. Attach the other buckles you need
    9. Attach the bag/backpack etc and make sure the buckles are placed in the correct positions
Go to Top