Airsoft Archieven

Savotta Helmet Camo Scrim

€19,90 – €22,90

While natural foliage is the ultimate helmet camouflage, a bushy cover with a 3D effect might be the next best thing. Quick and easy to use, easy to customize. They effectively break up helmet silhouettes and provide quick camouflage adjustment to suit different environments. The design is very simple, a single flat piece of 500D Cordura with alternating zigzag shapes cut into it. The zigzag pattern is positioned in such a way that it creates an opening for NVG mounts on the front. Small slits have been cut around the edges for the elastic cord. Thread the elastic cord through the slits, tie it at the back, and pull it over your helmet like a shower cap. Finish it off by pulling back any excess material and rolling it underneath yourself to tighten the cover. If you want to adjust the fit, you can play around with threading the elastic cord through the slits and zigzag pattern in different ways. And if you get really wild and feel the need: you can even cut off excess material from the cover, but of course, such huge adjustments are at your own risk. KEY FEATURES

3D Effect Camouflage Plate for Helmets
One-size-fits-most, best suited for high-cut L and XL helmets
Lightweight Laser Cut 500D Cordura
Quick and easy to apply and remove
All color options offer good NIR performance
2-year material and product warranty
Gemaakt in Finland

TECHNICAL SPECIFICATIONS

Weight (in retail container): 65 g
Dimensions (in retail packaging): 10 x 15 x 4 cm (W x L x D)
Fabric: 500D Cordura (100% polyamide)

Select options Details

Agilite Rear Pouch

€19,95

The semi-rigid exterior of the pouch provides additional impact protection for rear accessories and has a central loop for ID patches. It also has a lower storage compartment for PTT cables when not in use. It's securely and securely connected and yet can be put on and off in about 60 seconds, so you can connect or unplug depending on your mission set.

Includes Rear pod + extended bungee cord
The rear pocket integrates seamlessly with the Mohawk, Mohawk Air and Gen4 Lo-Pro helmet covers.
Provides mission-specific customizability.
Securely attached to the helmet with Velcro, Velcro under tabs and milspec bungee cord.
Provides new advanced functionality and universal accessory management.
Uses a new versatile rear flex cell that fits all common NVG battery packs and counterweights.
Has strategically placed outputs for all cables.
The semi-rigid exterior of the cell provides the rear accessories with additional protection against impact and has a central loop for ID patches.

Select options Details

Invader Gear 5.56 Triple Direct Action Mag Pouch

€19,95

5.56 Triple Direct Action Mag Pouch from Invader Gear in Wolf Grey.

Select options Details

Not in stock - on order

Pachmayr Slip-On Grip Univ Pistol Black

€19,95

The Gripper Slip-On Grip from Pachmayr has a unique design and contour, allowing it to fit a wide range of popular medium to large pistols. The Gripper Slip-On has an attractive non-slip texture and palm bulges for better fit and control. The contoured cutting lines allow you to adjust the grip to fit your gun. Perfect for Glock and other polymer frame pistols. Caution: Do not use on handguns with a safety catch.

Optimal size for a wide variety of pistols.
Can be cut to size and has contoured cutting lines for a clean, even cut.
Comfortable finger grooves provide better control.
The back of the finger grooves is recessed so that they can be used on pistols with or without finger grooves.
Non-slip texture and bulges in the palm for perfect fit and control.
The Gripper is made of abrasion-resistant rubber and is insensitive to weather, sweat, oil and solvents.
Perfect for Glock and other polymer frame pistols.

This grip fits the following pistols (some models may need to be modified):

Glock 19, 23, 25, 32, 38, and 17, 20, 21, 22, 31, 34, 35, 37
S&W M&P Full Size & Compact, M&P M2.0 Full Size & Compact
S&W Sigma, SD, SD VE
Sig 226, 228, 229, P320 Full & Compact Ruger SR9, 22/45
Beretta 92, 96
CZ 75, P-07
Walther P99
Hi Point 380/9mm/40/45 Browning Hi-Power H&K USP

Details

Not in stock - on order

ASG – Dan Wesson handgun carry bag

€19,99

ASG Dan Wesson Soft Bag Grey A stylish bag for the Dan Wesson series! Details:

Made of 600D nylon
Fits all Dan Wesson replicas, even with optics!
Separate compartment for the replica, with Velcro closure
3 mesh bags for exra ammunition or CO2 cartridges
Elastic loops for 6 speedloaders
Foam padding protects the replica
Nice license on the front
Ultimate carrying bag for the Dan Wesson owners!

Note! Content not included!

Details

Snigel knee pads 2.0

€20,95

12 mm flexible, ergonomic polyethylene knee pads. The pair of knee pads sits in the pockets on the inside of the pants, with the ribbed side facing inwards, to protect the knees. The text "This side towards the enemy" is placed on the outside of the pants. Holes have been punched into the knee pads to increase ventilation, making them cooler in hot weather. The lower part of the pads can be cut off to adjust the height so that it ends up on the knee when you kneel. The knee pad can be used in the Snigel combat pants Article number: 00-201669A01-000 Weight: 40 grams Dimensions: 25 x 18 x 2 cm

Add to cart Details

Warrior Assault Systems Single Quick Mag 9mm

€21,90

The Single Quick Mag is a versatile multifunction charger bag that can hold a variety of 9 mm chargers. The size can be adjusted by means of a wired elastic cord that is wired through the side of the pouch.

Add to cart Details

Condor Micro dump pouch

€21,95

The Condor Micro Dump Pouch is a rollable universal pouch for empty mags, shotgun shells or other utensils. Suitable for 8 pieces of 5.56 NATO STANAG mags. Material 100% Polyester. data:

Small to fold.
Large opening with elastic drawstring and pull stoppers for adjusting the width.
Mesh bottom.
2 removable PALS fasteners for the MOLLE system (25 mm).
Dimensions folded: 10 x 10 x 4 cm.
Dimensions open: approx. 27 x 25 cm.
Weight: approx. 140 g.

Select options Details

Snigel GP Pouch 3 2.0

€21,95

The Snigel GP Pouch 3 2.0 has a removable elastic cord and a pull tab to facilitate use. A light pouch for general use to store small objects. The pouch is designed to be light and take up as little space as possible, while remaining strong enough for military use. Elastic band on the pouch to keep the contents safe even when the valve is open. Pull tab on the flap to open it easily, even with gloves on. Velcro flap and pull tab for easy opening The flap can be slid into the pouch and secured with Velcro, making it easier to access the items you carry in the case. Drain hole at the bottom. Thanks to the folding system, the pouch can be attached to any vest or belt. The bag has foldable Velcro straps at the back so that the bag can be worn horizontally on the belt. To wear it vertically, use the quiet and easy-to-use fold back system on the back of the case. This system makes it possible to attach the pouch without removing other pouches from the belt. Capacity: 0,2L Fits: Pepper spray short, short wide flash bulbs, distraction grenades, 40mm grenades, GPS, cell phone Fits: Equipment vest, belt, leg plate or leg mount.

Select options Details

Not in stock - on order

Warrior Assault Systems Single Open Mag Pouch 7.62mm

€22,95

The Warrior single 7.62 mm open shorts is a great universal Open Mag Pouch that can hold a single SCAR H (7.62 mm x 51 mm) Mag. It can also contain a warehouse for an SR25 G3 or M14. Each pouch has 2 MOLLE arms for attachment at the back and takes up 2 horizontal rows of MOLLE.

Details

Not in stock - on order

Agilite AMAP III Conversion Attachment Kit

€23,95

With the AMAP III Conversion Kit you can attach the Agilite AMAP III and other Agilite accessories directly to ANY plate carrier. Agilite-plate carriers are already equipped with the K-Series fastening system that allows you to attach assault packs directly. However, if your department or military unit requires a non-Agilite carrier, the conversion kit can be retrofitted in minutes and makes any plate carrier compatible with Agilite attack suits or hydration systems. After installation, you can put on and take off your Assault pack in seconds. The Conversion Kit is very unobtrusive, so it can be permanently applied to your back carrier or quickly removed when you are not using it. Why would I want to attach my attack pack directly to my plate carrier? By attaching your assault pack directly to your Plate Carrier, you'll be with one grip on your gear and survival system, whether it's out of your cage, your vehicle or from under your bed. When you need to get the HELO or when you're facing a bad guy, you have your Plate Carrier, armor, ammo, helmet, eye protection, supplies, etc. in one graspable unit, reducing your reaction time. It also means that in a firefight, you don't have shoulder pads on shoulder pads, all of which move independently of each other and unnecessarily swell your shoulders and forecloth. All your gear works as 1 unit, and does not hinder your rifle or head manipulation. Details

This allows you to attach the AMAPIII assault pack directly to ANY plate carrier with MOLLE (not just Agilite plate carriers), in seconds
Consists of 1 central attachment and 2 connecting buckles
Can be quickly and easily installed on or removed from any plate carrier
Once installed, you can turn AMAP III on and off in seconds
Equipped with loop/buckle attachment points to make the wearer Agilite-compatible

Sizing

1 size
Fits any plate carrier with at least 2 rows of 4 horizontal MOLLE loops (or more)

Dimensions

Height: 30cm (11.8")
Width: 15cm
Depth: 8mm

Specifications

500 Denier Mil Spec Tactical Nylon
Mil Spec Plastic Hardware
Fits any plate carrier with 6 horizontal MOLLE loops (or more)

Details

Warrior Assault Systems Utility/Multi Tool Pouch

€24,90

The Warrior Utility Tool Pouch is suitable for small to medium-sized tools such as Gerbers 400 compact. This bag can contain 1 row of MOLLE on any compatible carrying belt or bag.

Add to cart Details

Warrior Assault Systems Small Horizontal MOLLE Pouch Zipped

€24,90

Warrior's Small Horizontal Utility Pouch is another great multifunctional pouch that incorporates 4 rows of MOLLE on any compatible carrying belt or bag.

Add to cart Details

Warrior Assault Systems Single Covered Mag Pouch M4 5.56mm

€24,90

The 5.56mm M4 pouch contains 2 x M4 - SA80 style Mags (including P Mags) H&K 416 Diemaco Sig 516 etc... Has a rear cover that can be secured in open position in preparation for a rapid mag change. Each pouch has 2 MOLLE arms for attachment at the back and takes up 2 horizontal rows of MOLLE.

Add to cart Details

SwissEye Lancer Clear

€24,95

The Swiss Eye Lancer clear is a lovely seated pair of glasses suitable for activities such as airsoft. It protects the eyes has polycarbanate lenses with an anti-fog and anti-scratch coating and give 100% protection against UVA, UVB and UVC up to 400 nanometers. The glasses come in a microfibre bag. Optimal wearing comfort with ear protection due to the flat legs, equipped with rubber. Specifications of the Swiss Eye Lancer clear: * Adjustable legs * Anti-fog / anti-scratch coating * 100% UVA, UVB and UVC protection up to 400 nm (nanometer) * Microfibre carrier bag * EN 1836:2005 + A1:2007 * STANAG 4296

Add to cart Details

Mechanix Wear FastFit Covert D4-360

€24,95

The cut-resistant Mechanix FastFit Covert D4-360 gloves protect enforcers when used with cutting resistance according to EN 388:2016 level D and ANSI A4. The glove is anatomically designed to adapt to the natural shapes of the hand using the three-dimensional design, and fits closely to the hand. The FastFit Covert D4-360 is made of carbon-coated, touchscreen-compatible synthetic leather with a cut-resistant Armortex lining®. The FastFit Covert D4-360 offers an unmatched fit with evaporation cooling by TrekDry ™ and robust carrying straps for in-use storage. Details

The breathable TrekDry® keeps your hands pleasantly cool.
The Armortex® inner layer offers a 360° cutting resistance according to EN 388: 2016 level D and ANSI A4.
The elastic stretch cuffs ensure a secure fit.
The anatomically designed two-piece palm prevents folds.
The narrowed fingertips improve the strength and durability of the fingertip.
The 0.6 mm thick faux leather offers high mobility and has touchscreen technology.
Nylon carry loops for storage.
You can go in the washing machine.

Performance level according to CE EN 388 Wear resistance: 4 Performance level according to CE EN 388 Cutting resistance: X Performance level according to CE EN 388 tear resistance: 2 Performance level according to CE EN 388 perforation: 4 Performance level according to CE EN 388 perforation resistance: 3 Performance level according to EN ISO 13997 TDM cutting resistance: D Weight: approx. 215 g / pair (size M).

Select options Details