- The use of thin goatskin and the specific construction of the fingers provides maximum mobility. The leather is liquid repellent so that blood, sweat, urine, etc. cannot infiltrate the glove.
- Strengthening the zone between the index and the thumb makes the glove more durable when handling (e.g. reloading) weapons.
- The specific design of the index finger allows perfect control of the weapon and ensures very high precision when frisking.
- In addition, this glove has a cutting protection level 4 in the palm, and the heat-resistant and fire retardant lining prevents burns in the event that the barrel of the weapon is held.
- A neoprene knuckle guard and a short cuff with cutout for watches increase wearing comfort.
-
2ndSkin - MoG 8108B 2ndSkin is mog's most versatile glove, deployable for police, security, customs, defense and more... This tactical glove feels like a second skin due to its slim fit. What's interesting about this 2ndSkin? -
Commando - MoG 9102B This durable tactical army glove was designed together with the Belgian army from the ground up. This resulted in the following distinctive features:- The very thin suede on the palm allows the operator to wield a weapon, ensuring a maximum tactical level. The heat-resistant substance prevents burns in the event that the barrel of the weapon is held after prolonged shooting.
- In addition, the touch function on all fingers allows the use of touchscreen devices.
- Very good and snug fit
- Reinforcements on the palm, especially on the crucial parts, make this glove a lot more durable.
- Specially designed air holes for breathability
- Use of quick-drying substances
- Strong and lightweight knuckle protection for general protection and breaching operations, with foam padding for a comfortable fit.
Be sure to check the size chart with the images so that you can make the right choice regarding the size of your gloves! -
Not in stock - on order
Waterproof backpack made of sturdy PVC material with roll closure, which protects the contents from splashing water and from short immersion in water. The closure should be rolled up 3 times for optimal protection. material 70% polyvinyl chloride, 30% polyester (250D); Filling: 100% polyethylene foam (270 g / m²) data:- Ergonomically shaped shoulder straps with D-ring.
- Height adjustable chest strap with fast-circuiting.
- Lap belt with quick release.
- Mesh lined back.
- Main compartment with roll closure.
- Two compression bands on each side.
- MOLLE lu system on the front and sides.
- Velcro for ID patches.
- Includes Mil-Tec rubber patch.
- Capacity: approx. 35 liters.
- Dimensions: approx. 57 x 29 x 20 cm.
- Weight: 1180 grams.
-
A stylishly adjustable ergonomic design, with ventilation in frame and nose bridge, that provides comfortable protection with full peripheral vision. Bright lens for general applications that require protection against impacts. They are CE certified, your guarantee for safe, reliable protection. functions:- Stylish, ergonomic frame combined with slim polycarbonate lenses for the ultimate in protection and style.
- The newly designed ventilated nose piece is soft and adjustable, allowing heat to be dissipated from the nose bridge and reducing fogging.
- Perfectly balanced from sleep tips to the back of the nose, for the best possible fit.
- High-quality optics offer extreme clarity and no distortion.
- Soft, double-injected rubber legs combined with fully adjustable, straight legs enhance the highest level of comfort and fit.
- The top of the frame is ventilated so that air can circulate and fog up is prevented.
- Curved lens with 9.75 base provides excellent lateral protection against wind and particles in the air.
- Provides protection against excessive glare.
- Provides 99% protection against harmful UVA and UV-B rays.
- Ansi Z87.1-2003 exceeds high impact requirements.
- CAN/CSA Z94.3-07.
- CE EN166 certified.
-
Not in stock - on order
A well-constructed enveloping design that provides comfortable protection with full peripheral vision. Tight-fitting sleeping arms with strong hinges, hold them well on your head during vigorous activities. Bright lens. They are CE certified, your guarantee for safe, reliable protection. functions:- Straight sleep and integrated nosepiece fit all face sizes.
- General purposes for indoor applications that require impact protection.
- Provides protection against excessive glare
- Provides 99% protection against harmful UVA and UV-B rays.
- Scratch-resistant lenses made of 100% polycarbonate
- Exceeds ANSI Z87.1-2003 high impact requirements
- CE EN166 certified
-
The ULTRAIR Power Gas from ActionSportGames A/S offers high performance within a wide temperature range. The filling valves are specially designed and manufactured in aluminum, creating a strong filling valve that does not break or kink when used. The filling valve leaks very rarely when filling Airsoft pistols, this ensures a very low waste of gas. All ULTRAIR cans are correctly marked according to EU standards. Content: 570ml. -
12 mm flexible, ergonomic polyethylene knee pads. The pair of knee pads sits in the pockets on the inside of the pants, with the ribbed side facing inwards, to protect the knees. The text "This side towards the enemy" is placed on the outside of the pants. Holes have been punched into the knee pads to increase ventilation, making them cooler in hot weather. The lower part of the pads can be cut off to adjust the height so that it ends up on the knee when you kneel. The knee pad can be used in the Snigel combat pants Article number: 00-201669A01-000 Weight: 40 grams Dimensions: 25 x 18 x 2 cm -
Version 3.0 The K19 is the ultimate modern plate carrier. Designed, tested and proven in battle in Israel and behind enemy lines with some of the IDF's most elite units. The K19 has many subtle but revolutionary features that no other plate carrier has. When it comes to the belly band, we have thought of everything. Many modern plate carriers now use quick release mechanisms, but they always come at the expense of not being able to easily adjust the fit. The K19 uses our Egress™ Quick-release system and patented Fast-Adjust™ Cummerbund that can be adjusted and refined by the wearer in real time. Getting the perfect fit can depend on your specific mission gear, what you're wearing underneath (which can change halfway through the mission), or even how much you ate for lunch. We know that the ability to customize it yourself, on-the-fly, is critical to avoid unnecessary fatigue and impaired combat awareness. The K19 has a one-size-fits-all belly band and multi-size plate bag, eliminating the need to make complicated and risky size choices when buying. You know it will always suit you or members of your team, regardless of your gear or mission set. This is also important for procurement professionals who can be sure that it is a good fit for all their boys (or girls). The quick-adjustable belly strap also has a built-in stretch element that allows the vest to be pulled nice and tight so it doesn't bounce when you run, but that gives you that inch or so of stretch needed when you fall on a knee so the wearer doesn't flatten their torso. The latest version of the K19 is also compatible with placard, with both upper attachment points and a new laser-cut loop overlay. This new layer gives you the best of all worlds. It allows you to either directly add velcro placards, or use the mil spec, bartacked molle underneath to attach ordinary molle bags. Unlike other carriers, the quick-release fasteners in the shoulder area are placed far back so they don't interfere with your rifle stock and are still easily accessible. When it comes to comfort, the K19 shares many of the comfort features of the battle-proven Agilite K5, which is considered the most comfortable plate carrier on the market. Such comfort features include a generous melting foam shoulder pad for extreme comfort even with prolonged use. Anyone who has spent time in the military knows that even the shortest missions can culminate in multiple day operations. Comfort is not a luxury, it is a necessity to stay alert and not be distracted in hostile environments where complacency can cost you your life. One of the secrets of the K19's comfort level is that the shoulder straps create a patented "V" shape for the mass that distributes the weight over the maximum surface and relieves the pressure points. The back of the K19 plate bags has a triple layer of low-profile fusion foam to stay comfortable even when using the K19 with hardened steel or ceramic armor plates. Steel or ceramic plates often have hard corners and edges that can dig into your hull when using regular plate carriers, but the K19 has inherent padding to prevent this. The K19 is also compatible with the Agilite K-series, which means it has the ability to attach the AMAP III Assault package directly to it within seconds. No getting MOLLE, no hassle. At the back, the belly strap has numerous attachment points for the mil-spec G hooks, allowing a perfect fit for everyone, from the largest to the smallest person, without making the plate carrier unnecessarily large or prohibitively small. The K19 has grown from the front lines of the Israeli Special Forces to one of the best-selling plate carriers in the US. It has traveled many miles and crossed borders to some of the most dangerous places in the world to bring you one of the most detailed and thoughtful plate carriers on earth. Details- Integrated Egress™ Quick-release system
- Patented one-size-fits-all Fast-Adjust™ Cumberband that can be adjusted by the wearer in real time.
- Shoulder exit buckle are positioned backwards so that they do not interfere with the placement of the rifle stock
- One-size plate bag with internal controller to fit perfectly on all common board sizes (SAPI S, M or L-see size chart for exact details).
- One-Size-fits-all belly band-no risks or size decisions to be made during purchase-fit for very small-very large people.
- Suitable for plates
- Administration pocket with zipper at the front
- Fusion foam shoulder pad for long-term comfort
- Patented "V" design distributes the weight over the maximum surface area of the shoulders to the center of the mass to avoid pressure points.
- Rear tow lever
- Skeletal shoulders for communication and drinking tubes
- Laser-cut Velcro panels front and rear
- Agilite K Series™ compatible
- Designed, tested and proven in battle in Israel
- 1000D CORDURA® Mil Spec Tactical Nylon
- Mil Spec polymer buckles and hardware
- Egress™ Quick-release system and patented Fast-Adjust™ Cumberband.
- Laser cut Velcro MOLLE overlay panels
- Fits any size S, M or L SAPI/ESAPI plates up to 1.5 inches thick
- Fits all 10" X12" plates
- Dimensions chest panel with Velcro: 25cm*9cm (9.8" x 3.5")
- Laser Engraved Mil Spec Polymer Cord Pullers
- Weight: 2.5 lbs (1.1 kg) including Fast-Adjust Cummerbund™
-
Agilite Retractor ballistic side plate carriers allow you to add additional ballistic protection to your installation to give you extra vital organ protection when used in high threat environments. They can be connected to ANY MOLLE Cummerbund or other MOLLE platform, not just Agilite platforms, and are lightweight, wear-resistant and intelligently designed to be the only side plate carriers you will ever need. The unique Israeli design ensures that a standard Special Forces 6 "X6" plate fits perfectly, but also expands directly to fit a 6"X8" Infantry issued plate, just a sine if you have missions that require extra coverage or if that's all you have access to during a deployment. Designed, tested and manufactured in Israel, they fit into SAPI. ESAPI or other common ballistic side plates up to 1 inch thick. Retractor side plate carriers can also be used to hold non-ballistic training plates to prepare you for the front lines and make your Crossfit or other training session more serious and challenging. Note: Side plate carriers with retractor are non-ballistic and are not export restricted - they are only a carrier platform for ballistic side plates. Specs:- Mil Spec 1000d tactical nylon
- Includes Agilite polymer handle
- Made in Israel
-
The blanket has a fleece construction with a high loft in combination with a waterproof and breathable outer fabric. The blanket has two functions: a traditional blanket and an insulated poncho worn over the shoulders. The blanket fits in its own compact bag measuring 19x13x24 cm. Laid flat, the blanket is 145 cm long, 80 cm wide at the foot and 110 cm at the top. The blanket is ideal for 24-48 hour missions and effectively repels the cold during rest or guard duty. The blanket can be easily attached around your shoulders with five press studs.- The blanket is made of fleece with a waterproof/breathable outer fabric.
- It can be used as a blanket or as a poncho over the shoulders.
- Perfect for a 24-48 hour mission.
- Keeps the cold away when you're asleep or on watch.
- With a push button, you can attach it over your shoulders.
- Packed in its own small bag, 17x12x23 cm.
-
Fast Rope - MoG 9163 This glove was developed in collaboration with experts from the Dutch Defence. The goal was to develop a glove that provides both maximum protection during fast roping exercises and high tactility for handling weapons in case of interventions. Where most fast roping gloves do not meet both conditions, we designed a unique solution in the world of fast roping. The split leather palm provides excellent grip on both dry and wet ropes and is a great buffer against heat accumulation during fast roping. In addition, handling weapons with these gloves is no longer a theme. Applications- for fast rope work
- tested positive for descents up to 90 ft
- Split leather palm provides excellent grip on both dry and wet ropes and is a great buffer against heat accumulation during fast rope work.
- Slim Fit finger construction provides extremely high dexterity for handling ropes, weapons, radio and equipment, and prevents the risk of twisted fingers.
- Cutout in crucial places on index finger and thumb for extra flexibility.
- Highly durable top layer in split leather that provides safe cut protection and extra padding in the palm of the palm guarantees high protection against friction and heat generation, allowing rope work up to 90 Ft.
- Opening for attachment to carabiner.
- Stitching at strategic points ensures very high flexibility of the glove.
- Extra wide cuff with Velcro closure and reinforcement of the wrist.
- Back of the hand in elastic and quick-drying fabric for a breathable, comfortable fit.
- Reinforcement of critical areas on/between thumbs and forefinger, for extra protection
- Defense
- Police units (SRT, DSI, DSU, AT, ...)
- Bailouts
- 7 - 13
-
MG AMMUNITION BAG -09 Fits in it: 200 x 5.56 mm or 200 x 7.62 mm or 200 cassette Beware: In your hand, over your shoulder or on the equipment vest functions:- The perfect case to carry ammunition for the SAW/Minimi machine gun
- For 200 rounds coupled 5.56 ammunition free of charge or in a cassette
- Also suitable for 7.62 coupled ammunition
- Can be used for 2 Cal 50 warehouses
- Webbing on both sides for attaching small bags
- The pouch can be attached to the vest or worn in a shoulder strap (not included)
- Article number: 22-00511-09-000
- EAN: 7332673301539
- Weight: 300 grams
- Dimensions: 18 x 19 x 8 cm
- Category: Holders & bags
- Color: Grey
-
Pentagon Tactical Baseball Cap with velcro patches for friend-enemy identification on front, back and on cap. Six panel cap designed for tactical use. The fixed flap provides good sun protection and the size of the cap can be adjusted with a Velcro on the back. Details:- 6 panels construction.
- Embroidered ventilation holes.
- Preformed peak.
- Size adjustable with Velcro.
- Velcro surfaces for ID patches on the front, back and crown.
- Weight: about 85g
-
The Agilite Pincer Placard™ is an elastic placard with hook backing that can hold three 5.56 magazines. Thanks to the revolutionary, patent-pending funnel-shaped magwell design, you can grab or re-index a warehouse with just one hand, while still maintaining a rock-solid retention so your magazines never fall out. Elastic warehouse bags are popular because of their easy access and low profile. However, they all have 1 of the 2 flaws: Either they are too closed, so it is almost impossible to re-enter a warehouse with 1 hand. Or they're too loose for you to reposition a magazine, but you have to worry about it falling out because of unreliable retention. The Pincer Placard™ solves both problems and gives you the best of all worlds. The patent-pending funnel-shaped magwells guide your magazines into the bags, so you can re-insert a warehouse with just one hand without any problems. Despite this possibility, the forceps pockets still hold the magazines tightly, so you never have to worry about losing them. The Pincer Placard™ comes standard with both MOLLE placard buckles and G hooks and has a built-in height adjustment capability so that it fits not only on Agilite plate carriers, but also on any placard-compatible plate carrier and instantly gets a perfect fit. It also has laser-cut loops on the side for attachment to common chest harness systems. The base of the Pincer placard is made of laser-cut Mil-Spec Squadron material that allows water drainage but covers the ends of your magazines to protect them from dust, dirt, and wear that can cause weapon failure. The Polymer magwells give elastic pouches long-lasting reliable retention and superior durability where they normally fall apart. While not required, the Placard also has a loop interior, so you can add Agilite Jump Retention tabs if your unit's regulations require for skydiving, rotating or maritime operations or if you just want to add an extra layer of retention. They include Agilite's patented AG™ technology with polymer pull tabs, so even when applied, they give you unhindered one-handed access to your magazines. Whether you're defending your country on the tip of the spear or defending your family, the Agilite Pincer Placard gives you an edge. Details:- Suitable for three 5.56 warehouses
- Magazine bag with brackets for plate carriers
- Patented funnel-shaped warehouse tubes guide the warehouse to the optimal insertion point, so the magazine doesn't get stuck and can be re-indexed quickly
- Polymer magwells give elastic pouches long-lasting reliable retention and superior durability
- Attaches to any Agilite or other plate carrier or backpack in seconds
- Built-in ability to adjust the height for perfect positioning of the plate carrier
- Compatible with both G Hook and Placard Buckle (both included with the product)
- Allows the warehouse to be quietly picked up or reinserted
- Designed, tested and tested in battle in Israel
- Suitable for three 5.56 warehouses
- Weight: 181 grams
- Dimensions: 25cm*9cm (9.8" x 3.5")
- Patent pending durable polymer magwells
- Patented mil-spec G hooks
- Including mil-spec polymer MOLLE Placard buckles
- Laser-cut Squadron mil-spec laminate fabric
-
Not in stock - on order
Many fans of the 5.11 Tactical Trousers do not know that there is a vertical slot for neoprene cushions on the inside of the trouser legs at the level of the knees. The knee pads fit perfectly into the pants to provide the necessary protection. material Material: 90% rubber foam bonded with 10% nylon fabric, thickness 6 mm. -
The XPD pads are extremely light and supple, they adapt to the shape of the body and are therefore extremely comfortable to wear. They offer first-class protection and shock absorption. The cushions consist of a 1000D nylon-coated core of shock-absorbing EVA special foam and a protective plate made of hard plastic. The inside is extra lined with Cool Max, which increases the wearing comfort even more. The Rapid Deployment Clips is based on a hook-and-eye principle, so the protectors can be removed or fastened in no time. The two fastening straps can be adjusted lengthwise by means of Velcro and are made of a highly elastic material that adapts to the movements. material Upper material: 1000D Nylon; Lining: 100% Polyester Weight: approx. 200 g/pair.