Pouches - A FULL METAL JACKET SHOP

Not in stock - on order
Agilite Pincer Placard

€83,90 – €97,95
The Agilite Pincer Placard™ is an elastic placard with hook backing that can hold three 5.56 magazines. Thanks to the revolutionary, patent-pending funnel-shaped magwell design, you can grab or re-index a warehouse with just one hand, while still maintaining a rock-solid retention so your magazines never fall out. Elastic warehouse bags are popular because of their easy access and low profile. However, they all have 1 of the 2 flaws: Either they are too closed, so it is almost impossible to re-enter a warehouse with 1 hand. Or they're too loose for you to reposition a magazine, but you have to worry about it falling out because of unreliable retention. The Pincer Placard™ solves both problems and gives you the best of all worlds. The patent-pending funnel-shaped magwells guide your magazines into the bags, so you can re-insert a warehouse with just one hand without any problems. Despite this possibility, the forceps pockets still hold the magazines tightly, so you never have to worry about losing them. The Pincer Placard™ comes standard with both MOLLE placard buckles and G hooks and has a built-in height adjustment capability so that it fits not only on Agilite plate carriers, but also on any placard-compatible plate carrier and instantly gets a perfect fit. It also has laser-cut loops on the side for attachment to common chest harness systems. The base of the Pincer placard is made of laser-cut Mil-Spec Squadron material that allows water drainage but covers the ends of your magazines to protect them from dust, dirt, and wear that can cause weapon failure. The Polymer magwells give elastic pouches long-lasting reliable retention and superior durability where they normally fall apart. While not required, the Placard also has a loop interior, so you can add Agilite Jump Retention tabs if your unit's regulations require for skydiving, rotating or maritime operations or if you just want to add an extra layer of retention. They include Agilite's patented AG™ technology with polymer pull tabs, so even when applied, they give you unhindered one-handed access to your magazines. Whether you're defending your country on the tip of the spear or defending your family, the Agilite Pincer Placard gives you an edge. Details:

Suitable for three 5.56 warehouses

Magazine bag with brackets for plate carriers

Patented funnel-shaped warehouse tubes guide the warehouse to the optimal insertion point, so the magazine doesn't get stuck and can be re-indexed quickly

Polymer magwells give elastic pouches long-lasting reliable retention and superior durability

Attaches to any Agilite or other plate carrier or backpack in seconds

Built-in ability to adjust the height for perfect positioning of the plate carrier

Compatible with both G Hook and Placard Buckle (both included with the product)

Allows the warehouse to be quietly picked up or reinserted

Designed, tested and tested in battle in Israel

Specifications:

Suitable for three 5.56 warehouses

Weight: 181 grams

Dimensions: 25cm*9cm (9.8" x 3.5")

Patent pending durable polymer magwells

Patented mil-spec G hooks

Including mil-spec polymer MOLLE Placard buckles

Laser-cut Squadron mil-spec laminate fabric

Size: The Pincer Placard fits on any plate carrier that is suitable for placards and is equipped with both G-Hooks and MOLLE placard buckles. The Pincer placard is built for three 5.56 warehouses and can also be used for similar or smaller items. Hook and loop chest pan dimensions: 25cm*9cm (9.8" x 3.5") FAQ: Q: Does this fit on my Plate Carrier ? A: The Pincer Placard can be attached to any Agilite or other plate carrier or backpack in seconds. Q: What caliber of magazines does the Pincer Placard fit on? A: The Pincer Placard™ only fits 5.56, AR-15 style magazines Q:Is this pouch also available in the singular? A: At the moment, the pincer placard is only available as a triple mag pouch Q:Do I need Jump Retention Tabs for the Pincer Placard? A:Only if your unit's regulations require them for skydiving, rotating or maritime operations or if you just want an extra layer of retention. If you put other items in the bag in addition to the 5.56 magazines, you can use them for additional retention. Q: Do items other than 5.56 warehouses fit in the pincer? A:Yes, it is intended for 5.56 magazines, but other objects of similar size can also fit in it, for example flashlights. For other items you can add the Agilite Jump Retention tabs
Details
Agilite Six Pack™ Hanger Pouch

€74,95 – €82,95
The Agilite Six pack is designed to be the best hanger bag on the market. Validated in months of real missions, our goal was to eliminate all problems with existing hangers. Most hangers are too long, flapping and dangling under your belt line and hindering your movement. The geometry of the Six pack has been optimized to have the same storage capacity, but to be much more compact and not get in the way. Plate carrier hanger pouches make sense because they sit in a very accessible place on your kit, but many have top zippers that make it difficult to see what's inside. The Six Pack pendant seamlessly integrates with the rest of your gear, giving you both quick one-handed access and a view of the contents of your pouch. Many drop pouches also have external turnstile sleeves where the turnstile can fall out unless the pouch is full. The Six Pack has a built-in flap that holds the turnstile even when the bag isn't full, and has a protective cordura exterior. It also has designated spots for chemlights, markers and other essential items. The flap can be executed completely smooth just as easily, if you prefer. On the inside, you have more versatility than regular dangling bags, because you have internal elastic and a loop for attaching inserts with Velcro. It comes with an optional fanny pack conversion kit, so you can convert it in seconds for everyday use. For the organization you have 2 separate zip pockets with different tactile zipper heads, so you can distinguish them by feel, without having to look down. Operating in high-threat environments, our customers need to keep their eyes on the target and not have to constantly mess with their gear. Whether you're defending your country at the cutting edge, defending your community, or defending your home, the Six Pack gives you an edge. Details

Gives you extra, easily accessible storage space under your plate holder

Ergonomic shape is not too low so that it does not hinder your movements

Multiple internal and external fastening methods

Large capacity but more compact than traditional pendant bags

Built to make the contents of the pouch visible

Integrated lower flap gives quick access and protection to turnstiles

Can be converted into a fanny pack in seconds using a conversion belt (not included)

Proven in battle in Israel

Specifications

500D CORDURA® Mil Spec Tactical Nylon.

Milspec Webing

YKK Zippers

Drain hole

Dimensions: 9.6" x4.3" x2.7"

Weight: 154.5g

Storage capacity: 1.8 litres

Sizing

One size fits all

Can be attached via the loop of the front plate carrier or via the cover of the front plate bag

Content not included. Comes with a Fanny Pack conversion belt!
Select options Details
Agilite AG3™ Placard Triple Mag Pouch

€62,95 – €71,45
The Agilite AG3 Placard is a bungee retention placard that allows you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way.

Suitable for three 5.56 magazines and can be attached to any plate holder with G-hooks or Placard buckles (both buckles and G-hooks included with the placard).

Bungee retention warehouse bags have been used for more than a decade because they hold warehouses well, but they have an inherent, annoying flaw. They make removing or returning a warehouse inconvenient, with two hands and two movements, because the warehouse keeps hooking on the bungee tabs.

AG pouches solve this age-old problem and go from HALO jump-level retention to safety off, mag draw, may re-index and back without ever taking your dominant hand off your weapon.

The custom-polymer pull tabs also allow both mechanical and friction grip to get the perfect grip, with or without gloves.

Whether you're defending your country at the tip of the spear or defending your family, AG pouches give you a head start.

Sizes

Fits three 5.56x45 AR or M4 rifle magazines.

The AG3 Placard fits ANY plate carrier and is equipped with both G-hooks and MOLLE buckles.

Specifications

500D CORDURA® Mil Spec Tactical Nylon |

Laser cut Velcro MOLLE overlay

Suitable for three 5.56 warehouses

Height adjustable

Weight: 0.16 kg

Including mil-spec G-hooks

Including mil-spec Polymer MOLLE Placard buckles

Details

Suitable for three 5.56 warehouses

Makes it easy to pull or place a magazine with one hand

Proprietary polymer pull tab for exceptional grip

Reliable retention to never lose a warehouse

With hook closure, to be attached to any plate carrier that Placard is capable.

Proven in battle in Israel

Smart retention lip meets military requirements without obstructing access to the bag
Select options Details
Agilite Pincer™ Single 5.56 Mag Pouch |

€39,95 – €43,90
The Agilite Pincer Pouch is a MOLLE backed fast-draw low profile elastic mag pouch for a single 5.56 magazine. The patented funnel-shaped magnetic hole design makes it possible to grab or re-index a magazine with one hand. Open warehouse bags are popular, but have inherent flaws. They are often clumsy, clumsy, noisy or impossible to re-index a warehouse with one hand. The Pincer Pouch is lightweight, low profile, quiet and allows you to re-insert a magazine without a hitch. The Pincer Pouch is incredibly versatile, with a laser cut rear MOLLE to fit perfectly on all battle belts and plate carriers. The Pincer Pouch also has a loop on the inside so you can add Agilite Jump Retention tabs if your unit's regulations require it. They feature Agilite's patented AG™ polymer pull tab technology, so even when used, they give you unhindered one-handed access to your warehouses. Whether you're defending your country at the point of the spear, defending your family, or defending your home, Pincer Pouches will give you an edge. Sizing

ONE-SIZE-FITS-ALL

Fits a 5.56x45 AR or M4 rifle magazine.

Specifications

Fits in: A single 5.56 warehouse

Weight: 3oz (83g)

Dimensions: 14cm*9.5cm*3cm

Patented durable polymer magwells

Laser cut Squadron mil-spec laminate fabric

Details

Suitable for a 5.56 warehouse

MOLLE support

Can be connected to all battle belts and plate carriers

Quick-draw mag pouch with rock-solid retention

Patented magnet holder funnels magazines in the pouch, snag-free

Low profile elastic bag with superior durability and retention

Proven in Israel
Select options Details
Agilite AG1™ 5.56 Single Mag Pouch |

€29,95 – €34,95
Agilite AG Mag Pouches are bungee retention pouches that allow you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way. Bungee retention may pouches have been in use for over a decade because of how well they hold warehouses. but they have an inherent, annoying flaw. They make the removal or return of a mag a clumsy, two-convenient, two-motion process because the magazine sticks to the bungeelusjes. This is especially problematic with "tac reloads". AG pouches solve this age-old problem and go from HALO jump-level retention to safety, magazine pulling, magazine re-indexing and back without ever taking your dominant hand off your weapon. We don't believe in taking both hands off your weapon during a firefight, because we come from an environment where time outside the target and outside the weapon when the bullets fly around can easily cost you your life. Sometimes you can't miss that time to intervene again, because by grabbing you have to look down or take your second hand off your weapon. AG pouches use a combination of specially developed polymer pull tabs and various reinforced materials that work together to provide the retention level of closed-top pouches, but the fast pulling ability, without hooks, of open-top pouches. Your equipment should allow you to focus on the threat – it shouldn't bother or annoy you. The custom-made polymer pull tabs allow for both mechanical and friction grip for a perfect grip, with or without gloves. We don't believe in normal just because we've always done something a certain way doesn't mean we can't rethink it and evolve it to provide small but crucial benefits that improve your performance, comfort and safety. Whether you're defending your country on the tip of the spear or defending your family, AG pouches give you a head start. Details

Fits one 5.56 warehouse

Makes it possible to easily pull and insert the magazine with one hand

A patented polymer pull tab for exceptional grip

Reliable retention to never lose a warehouse

Built-in MOLLE rear mounting

Tested in battle in Israel

Smart retention tab meets military requirements without obstructing the entrance to the pouch

Specifications

500D CORDURA® Mil Spec Tactical Nylon

Laser cut Velcro MOLLE overlay

Takes 3 MOLLE slots down and 2 MOLLE slots transversely

Weight: 0.14lbs (0.06g)

Sizes

Suitable for one 5.56x45 AR or M4 rifle magazine

Takes 3 MOLLE slots down and 2 MOLLE slots transversely
Select options Details
Condor single kangaroo mag pouch gen II

€19,95
The Condor Single Kangaroo Mag Pouch Gen II magazine pouch offers space for an AR/M4 magazine and a pistol warehouse in a practical modular attachment. The simple, effective design includes an open bungee attachment and adjustable valve locks to ensure the warehouses stay securely stored inside and can be deployed in no time. Lasercut MOLLE is located at the back of the warehouse pocket to improve durability and weight. The Condor Kangaroo warehouse bag is compatible with the MOLLE webbing and can easily be attached to your plate carrier or chest rig in different places. Material 100% polyamide Details:

Detachable magazine holder with elastic cord.

Attached pistol magazine bag with removable and adjustable cover with Velcro.

Lasercut MOLLE on the back.

Detachable MOLLE / PALS fastening loops with push buttons.

Water drains on the floor.

Dimensions: approx. 12 x 7.5 x 2 cm (H / B/D).

Weight: about 120 grams.
Select options Details
Agilite AG3™ 5.56 Triple Mag Pouch |

€63,95 – €64,95
Agilite AG Mag Pouches are bungee retention pouches that allow you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way. Bungee retention may pouches have been in use for over a decade because of how well they hold warehouses. but they have an inherent, annoying flaw. They make the removal or return of a mag a clumsy, two-convenient, two-motion process because the magazine sticks to the bungeelusjes. This is especially problematic with "tac reloads". AG pouches solve this age-old problem and go from HALO jump-level retention to safety, magazine pulling, magazine re-indexing and back without ever taking your dominant hand off your weapon. We don't believe in taking both hands off your weapon during a firefight, because we come from an environment where time outside the target and outside the weapon when the bullets fly around can easily cost you your life. Sometimes you can't miss that time to intervene again, because by grabbing you have to look down or take your second hand off your weapon. AG pouches use a combination of specially developed polymer pull tabs and various reinforced materials that work together to provide the retention level of closed-top pouches, but the fast pulling ability, without hooks, of open-top pouches. Your equipment should allow you to focus on the threat – it shouldn't bother or annoy you. The custom-made polymer pull tabs allow for both mechanical and friction grip for a perfect grip, with or without gloves. We don't believe in normal just because we've always done something a certain way doesn't mean we can't rethink it and evolve it to provide small but crucial benefits that improve your performance, comfort and safety. Whether you're defending your country on the tip of the spear or defending your family, AG pouches give you a head start. Details

Suitable for three 5.56 warehouses

Makes it possible to easily pull and insert the magazine with one hand

A patented polymer pull tab for exceptional grip

Reliable retention to never lose a warehouse

Built-in MOLLE rear mounting

Tested in battle in Israel

Smart retention tab meets military requirements without obstructing the entrance to the pouch

Specifications

500D CORDURA® Mil Spec Tactical Nylon

Laser cut Velcro MOLLE overlay

Takes 3 MOLLE slots down and 6 MOLLE slots transversely

Weight: 0.35lbs (0.16kg)

Sizes

Suitable for three 5.56x45 AR or M4 rifle magazines

Takes 3 MOLLE slots down and 6 MOLLE slots transversely
Select options Details
Savotta Side Pouch 6L

€44,90 – €52,90
Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. The two vertical fastening straps leave an approx. 9 cm wide gap, so you can carry items such as axes, fishing sticks, etc. behind the pouch. Optimal attachment requires a width of four channels and a height of six (min. five) rows of PALS webbing. The compression straps on the side of the backpack, when put on, will prevent any movement of the backpack and its contents. The 6-litre side bag fits all our Jääkäri backpacks. For backpacks with less than six rows of PALS webbing on the sides, the bottom of the bag "hangs". You can have this absorbed by the compression straps on the sides, or you can choose to attach the pouch one step higher to the side of the backpack. Examples of use With a capacity of six liters, this is a medium-sized bag, not small, not large. Something you would expect with a backpack of 30-80 liters. Here are some examples of what will fit in such a bag:

A large tarp and accessories

A hammock and duvet

A lightweight puff jacket and pants or rain gear

Two regular 1.5 litre drink bottles

A Trangia 27 Series stove, fuel and some stuff to cook

A Jetboil stove, a gas cartridge, water and some stuff to cook

24 hour rations and snacks

Key features

Capacity approx. 6 litres

Covered zipper

Front vertical loops for compression straps

Internal D-ring for attaching small items

Internal flat rear compartment

Reinforced bottom and sides

PALS-compatible mounting system

Water drainage opening at the bottom

5-year material and manufacturer's warranty

Made in Finland/Estonia

Technical specifications

Weight: 240 g

Dimensions: 17 x 35 x 9 cm (W x L x D)

Main material: 500D Cordura (100% polyamide)

Lining: 210D polyamide

Webbing: 100% polyester
Select options Details
Agilite General Purpose Pouch

€53,95
Low-profile general-purpose pouch to store and organize essential items without sagging or flapping

MOLLE mount on the back (3 MOLLE slots on the front and 3 MOLLE slots on the bottom)

Pass-through for attachment to all straps

Built-in shock cord gives you the ability to tie items internally without wobbling or sagging.

Shock cord also serves as an attachment point for a Tourniquet

Built-in internal organization, including a loop for attaching velcro inserts.

Proven in battle in Israel

Sizing

Fits in one size

Can be attached to any MOLLE surface: Occupies 3 MOLLE slots at the bottom and across

Specs

500D CORDURA® Mil Spec Tactical Nylon

Milspec WebbingYKK Zippers

Drainage hole

*Content not included, for illustrative purposes only.
Select options Details
SnigelDesign 7.62 Elastic pouch 1.0

€29,95 – €32,45
A low profile, safe and versatile elastic pouch for all kinds of equipment that is to be carried on a trouser belt or tightly fit on an equipment vest.

Two outside compartments for pistol or SMG magazines, OC spray or any other smaller gear.

A full width inner compartment for a radio, 7,62 or 5,56 mm magazine or similar.

The pouch is made in an elastic fabric to stay as flat as possible and keep the content rattle free and secure.

Weight: 50 gr Dimensions: 8x15x2 cm
Select options Details
Not in stock - on order
Agilite Pincer™ Pistol Single Pouch

€35,90
The Agilite Pincer Pistol Pouch is a MOLLE backpack for a quick-to-pull, low-profile elastic pistol magazine for a single double-stacked 9mm pistol magazine (and other similarly sized items). The magwell's patented funnel-shaped design allows you to grab or re-index a magazine with one hand.

Open-top pistol bags are popular, but have inherent flaws. They are often clumsy, clumsy, noisy or impossible to re-index a warehouse with one hand.

The Pincer Pouch is lightweight, has a low profile, is quiet and you can put a magazine in it without hitches.

The Pincer pistol pouch is incredibly versatile, with double-cut laser-cut rear MOLLE to fit perfectly on all combat belts and plate carriers.

Includes height-adjustable flap to secure smaller items like multi-tools, flashlights and more.

Works perfectly in combination with the Pincer Placard 2n layer admin pouch

Sizing Fits any single double stacked 9mm pistol magazine Also fits multi-tools and small flashlights up to 14*5.5*4cm (5.5*2.2*1.6 inch) Specs Size: 14*5.5*4cm(5.5*2.2*1.6inch) Weight: 28g Materials: - Laser cut Velcro overlay panels - Laser cut Squadron™ laminate - 500D CORDURA® Mil Spec Tactical Nylo
Details
Agilite Pincer™ 2nd Layer Admin Pouch

€59,90 – €69,90
Attaches quickly and easily to the front of the Agilite Pincer™ Placard, giving it a whole new level of organization, storage and capabilities in one compact package.

Features a low profile with easily accessible administration pocket with both internal organization and a loop area for attaching velcro inserts.

Double side panels with laser-cut MOLLE, perfect for attaching Pincer™ Pistol Mag pouches or other single-column pouches of your choice.

2 internal elastic loops on the back, ideal for storing chemlights, trauma scissors, markers, pens and more.

Fits directly on the Agilite Pincer Placard* *This does NOT fit on any other placard system than the Agilite Pincer Placard. Dimensions: 47*13*3cm(18.5*5.1*1.1 inch) Weight: 0.3lbs (132g) Material:

500D CORDURA® Mil Spec Tactical Nylon

Laser cut Squadron™ laminate

Laser cut Velcro overlapping panels

*Pincer Placard™ is not included
Select options Details
Snigel Oyster Pouch 1.0

€37,95 – €55,95
The next generation of user-friendly Snigel zippered pouches. CHARACTERISTICS:

A lightweight general purpose pouch with a wide opening top zipper.

It opens on 3 sides for easy access to the contents of the pouch.

The zipper is half stiffened and placed at an angle to make it easier to open and close.

Soil drain.

Foldable fastening system makes it possible to attach the bag to any equipment vest or belt. MOLLE / PALS band on the outside.

Three rows of tires are covered with Velcro so that patches can be attached.

FITS INSIDE: Your night vision goggles, binoculars, gloves, medical supplies or any other little things you need to wear. Weight:

Small: 100 g

Medium: 130 g

Large: 160 g

Dimensions:

Small: L = 19, B = 8 & D = 6 cm.

Medium: L = 19, B = 12 & D = 8 cm.

Large: L = 19, B = 16 & D = 9 cm.

Materials:

100% polyamide PU-coated fabric.

100% polyester band
Select options Details
Savotta Vertical pocket L

€42,90 – €49,00
VERTICAL POUCH L
6 l multifunctional zippered bag. PALS-compatible attachment, designed for use with backpacks. TECHNICAL SPECIFICATIONS:

External dimensions: height 30 cm, width 17 cm, depth 12 cm.

Capacity bag closed: 6 liters.

Materials: 1000D Cordura (M05: Foxdura) PUR coating.

PALS attachment: height 3, width 4, two attachments 28 cm

Weight: 165 grams

Warranty: The product has a 2-year warranty for material and manufacturing defects.
Select options Details
Agilite Hook-Backed EDC Organizer Panel

€49,95
The Agilite EDC Organizer panel can be configured for numerous different equipment setups. The multi-functional storage areas work with everything from rifle ammunition, pistol ammunition and turnstiles, to laptop chargers, headphones, mouse and cables. It has two zipper pockets to store valuable or smaller items and compartments for pens, multitools, flashlights, survival gear, documents and electronics, and a mil-spec metal keychain. Details

The organizer panel provides the AMAP III user with a variety of storage options of different sizes, including elastic open pockets for magazines, mobile phones and other devices

Storage compartment for turnstiles, pens, multitools, flashlights, documents, rifle and pistol magazines

Large zipper pocket for laptop or phone chargers

Second zipped pocket for storing small, easy-to-lose items

Metal keychain

Specifications

500/1000 Denier CORDURA® Mil Spec Tactical Nylon

Laser cut fabrics & loop

Mil Spec Polymer & Metal Hardware

Agilite polymer grip-puller

Dimensions Organizer Panel Height: 24.1cm 9.5" Width: 25.5cm 10"
Select options Details
Savotta Vertical pouch M

€34,90
VERTICAL POUCH M
4 l multifunctional zippered bag. PALS-compatible attachment, designed for use with backpacks. TECHNICAL SPECIFICATIONS:

External dimensions: Height: 26 cm, width: 17 cm, depth: 9 cm

Bag content closed: 4 l

Material: PUR-coated 1000D Cordura

PALS attachment: height 3, width 4, fastenings 2 pieces 30 cm

Weight: 150 grams

Colour: olive green and black

WARRANTY AND WARRANTY: The product has a 2-year warranty for material and manufacturing defects. KEY FLAG PRODUCT: This Finnish Key Flag product is partly manufactured at our factory in Estonia, but more than 50% of the work is made in Finland.
Select options Details
Not in stock - on order
Agilite AMAP III Conversion Attachment Kit

€23,95
With the AMAP III Conversion Kit you can attach the Agilite AMAP III and other Agilite accessories directly to ANY plate carrier. Agilite-plate carriers are already equipped with the K-Series fastening system that allows you to attach assault packs directly. However, if your department or military unit requires a non-Agilite carrier, the conversion kit can be retrofitted in minutes and makes any plate carrier compatible with Agilite attack suits or hydration systems. After installation, you can put on and take off your Assault pack in seconds. The Conversion Kit is very unobtrusive, so it can be permanently applied to your back carrier or quickly removed when you are not using it. Why would I want to attach my attack pack directly to my plate carrier? By attaching your assault pack directly to your Plate Carrier, you'll be with one grip on your gear and survival system, whether it's out of your cage, your vehicle or from under your bed. When you need to get the HELO or when you're facing a bad guy, you have your Plate Carrier, armor, ammo, helmet, eye protection, supplies, etc. in one graspable unit, reducing your reaction time. It also means that in a firefight, you don't have shoulder pads on shoulder pads, all of which move independently of each other and unnecessarily swell your shoulders and forecloth. All your gear works as 1 unit, and does not hinder your rifle or head manipulation. Details

This allows you to attach the AMAPIII assault pack directly to ANY plate carrier with MOLLE (not just Agilite plate carriers), in seconds

Consists of 1 central attachment and 2 connecting buckles

Can be quickly and easily installed on or removed from any plate carrier

Once installed, you can turn AMAP III on and off in seconds

Equipped with loop/buckle attachment points to make the wearer Agilite-compatible

Sizing

1 size

Fits any plate carrier with at least 2 rows of 4 horizontal MOLLE loops (or more)

Dimensions

Height: 30cm (11.8")

Width: 15cm

Depth: 8mm

Specifications

500 Denier Mil Spec Tactical Nylon

Mil Spec Plastic Hardware

Fits any plate carrier with 6 horizontal MOLLE loops (or more)
Details
Savotta Horizontal pouch M

€29,90
Savotta Horizontal pouch M Universal bag of 3 l. MOLLE-compatible mounting system, for example for use with backpacks TECHNICAL SPECIFICATIONS:

External dimensions: height: 15 cm, width: 25 cm, depth: 8 cm

Capacity bag closed: 3 l

Materials: PUR-coated 1000D Cordura

MOLLE attachment: height 2, width 4, attachment 2 pieces. 24 cm

Weight: 130 grams

Colour: olive green and black

Warranty: The product has a 2-year warranty for material and manufacturing defects.
Select options Details
Warrior Assault Systems Single Pistol Mag Pouch 9mm

€19,90

Warriors-Single pistol mag pouch is suitable for a standard 9 mm magazine True MultiCam US tyre (with a breaking strength of 1200 lbs) US Thread treated against mold and UV light

Add to cart Details
Savotta Vertical pocket S

€29,90

VERTICAL POUCH S
2 l multifunction bag with zipper. PALS-compatible attachment, designed for use with backpacks. TECHNICAL SPECIFICATIONS: External dimensions: Height: 24 cm, width: 14 cm, depth: 6 cm Pocket contents closed: 2 l Material: PUR-coated 1000D Cordura PALS fastening: height 3, width 3, fasteners 2 pieces 30 cm Weight: 120 grams Colour: olive green and black Warranty: The product has a 2-year warranty for material and manufacturing defects. KEY FLAG PRODUCT: This is a Finnish Key Flag product, which means that more than 50% of the production work is carried out in Finland. Some of the work is outsourced from our factory in Estonia.

Select options Details
5.11 Tactical Flex Cuff Pouch

€29,45
The Flex Handcuff Holder is designed to carry 2 pairs of conventional or hinged handcuffs. It is equipped with the FLEX-HT™ mounting system for easy mounting on MOLLE or Hexgrid® platforms. The Velcro closure and the elastic side compression keep the handcuffs firmly in place. Easy-to-grip tabs give quick and easy access to the handcuffs when the situation required. Features

Handcuff case

Designed for 2 standard or hinged handcuffs

FLEX-HT™ mounting system

Velcro flap for quick access

Elastic side compression

500D Nylon |500D

Dimensions: 10.16 x 8.9 x 4.12 cm

Weight: 90 g

Colors: Black (019), Coyote (134), Ranger green (186)

* Secondary photos with accessories are not contractual
Select options Details
5.11 Tactical 21″ baton pouch

€24,95
Tactical pouch with flap for a 21" baton with the ability to store the ejected baton. Depending on the context, the top flap of the pouch may be placed differently. CHARACTERIZE:

Top holding flap with loop to grip

Small flap at the bottom for storing the opened baton

MOLLE fastening system

Stackable bag with MOLLE loops at the top

Fastening strap to secure the stick

500D nylon

Dimensions: 21.6 x 3.8 x 2.5 cm

Weight: 70 g

Color: black (019)
Add to cart Details
Agilite Jump Retention Tabs |™

€27,95
**AGILITE JUMP RETENTION TABS™ COME IN A SET OF 3** Say goodbye to the threading/knots of bungee cords and pull tabs that then get in the way. Agilite Jump Retention Tabs™ can be immediately put on and taken off on the Pincer™ Placard and anywhere you have hook & loop. They provide additional rock-solid retention for warehouses or other items during air or other particularly turbulent operations. They incorporate Agilite's patented AG™ polymer pull tab technology so that, even when applied, you can access your magazines unhindered and with one hand. Details

Agilite Jump Retention Tabs™ provide immediate, rock-solid retention of magazines or other items without the need to string or tie bungee cords.

Optimized for the Agilite Pincer™ Placard, but can also be used with other Placards or equipment with hook and loop

Attach/remove to any tactical hook or loop equipment in seconds during air or other particularly turbulent operations, so you never lose a magazine.

Built-in AG ™️ polymer pull tabs for unhindered, one-handed pulling/inserting magazines

Specifications

Weight: 0.05 kg

Hook attachment external, loop attachment internal

Sizing Optimized for the Agilite Pincer™ Placard, but can also be used with other Placards or warehouse bags with a hook and loop on the inside.
Select options Details
Not in stock - on order
Agilite Edge 3L Hydration Pack

€64,95
The Edge is a 3-liter tactical hydration carrier. It can be attached directly to the K5 Plate Carrier or any other modular plate carrier using the K Series MOLLE Hydration Attach Straps. It can also be worn independently using the K Series Shoulder straps. The Edge accommodates the Hydrapak Tactical Hydration Reservoir selected by Agilite for its excellent durability and ease of use or other 3L hydration bladders of the same size. The sleek design is built to be extremely unobtrusive for use during urban battles in close-quarter. The opening is shaped so that the hydration resevior can easily slide in and out, even when it's full, without disconnecting the Edge from your rig. Equipped with external Molle loops for attaching extra pouches. Specifications

1000D Mil-Spec Tactical Nylon

Mil Spec Plastic Hardware

Available in Multicam, Black & OD Green

Made in Israel

ATTENTION: EXCLUDING SHOULDER STRAPS *EXCLUDING RESERVOIR* ATTACHMENT STRAPS INCLUDED
Details
Savotta Trinket Pouch 15x20cm, hook back

€17,90
Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties

Three sizes: 10×15, 15×20 and 20×30 cm

Translucent mesh material

Zipper from corner to corner

Two 25 mm wide webbing loops in the corners

Color options for easy recognition

Velcro fastener (hook back) or plain (stand-alone)

5-year material and manufacturing warranty

Made in Finland/Estonia

Technical characteristics

Weight: - Hook back 10×15 cm: 37 g - Hook back 15×20 cm: 64 g - Hook back 20×30 cm: 90 g

Main material: 100% polyester

Webbing: 100% polyester
Select options Details
Savotta Horizontal pouch S

€26,90

HORIZONTAL POUCH S
The Savotta Horizontal Pocket S is a simple and practical pocket with a capacity of one litre. The bag is sealed with a two-way spray water-resistant reverse zipper with tractors at each end to facilitate the use of the bag. The pocket is durable thanks to the durable PUR-coated 1000d Cordura material and the bottom of the pocket is equipped with a metal drain ring. The interior of the horizontal pocket is undivided, which means that larger devices fit in easily and is easily accessible from outside the backpack. The horizontal compartment in S-size can be used as an extra compartment for small Jääkäri products, but thanks to its compact size can also be attached to the back of a backpack. The smallest horizontal compartment is an ideal choice if you need a simple and compact compartment for supplies. TECHNICAL SPECIFICATIONS: External dimensions: Height: 11 cm, width: 20 cm, depth: 5 cm Bag content closed: 1 l Material: PUR-coated 1000D Cordura PALS attachment: height 2, width 4, fastenings 2 pieces 24 cm Weight: 100 grams Colour: olive green and black Warranty: The product has a 2-year warranty for material and manufacturing defects. KEY FLAG PRODUCT: This is a Finnish Key Flag product, which means that more than 50% of the production work is carried out in Finland. Some of the work is outsourced from our factory in Estonia.

Select options Details
Agilite Micro Map

€165,95 – €177,95
The Agilite Micro MAP is a rear attack panel that attaches to any plate carrier and gives it a compact, extremely versatile, extra layer of storage and capabilities without extra bulk. It has been developed for units that carry out short missions, often in small spaces, and that require a high level of performance and diverse capabilities in an exceptionally compact package. Attaches to ANY plate carrier with MOLLE on the back and does not require its own zippers or other mounting systems (including the Agilite K-Zero and K19 plate carriers). Unlike other back panels that can only hold 1.5 liters of water, the Micro MAP can carry a full 3 liter hydration layer. Optimized for the Agilite 3 Liter SAPI Hydration Bladder - the first tactical hydration bladder designed specifically for SAPI Plate Carriers. The unique shape of the bladder maximizes the space available for carrying 3 liters of water, while still keeping the bladder in a low profile and non-intrusive. The Micro MAP features a stowable beavertail that expands the carrying capacity and can accommodate a wide range of additional gear, including helmets, clothing, and more. The beavertail has a fold-down flap for additional tools, such as a bolt cutter, rifle, and other items. Includes a full pass-through function for even longer items. Two built-in administration pockets for convenient storage of smaller items. Integrated cable management channels for organizing all your cables, without snagging. Whether you're on a mission or responding to a threat, the Micro MAP ensures that your entire gear and support system is at your fingertips. Sizing The Micro MAP fits ANY Plate Carrier with MOLLE on the back. Specs

500D & 1000D CORDURA® Mil Spec Tactical Nylon

Mil Spec tyres

YKK Zippers

Main compartment volume - 3 liters

Max. volume beavertail - 8 liters

Weight: 0.6 kg

Dimensions: 35cm*28cm (13.7" x 11")

*Plate carrier, contents and hydration blatter for illustrative purposes only. Sold separately.
Select options Details
Not in stock - on order

Warrior Assault Systems Single Open Mag Pouch M4 5.56mm

€24,95

The Warrior Assault System Single 5.56mm Open Mag Pouch is designed to be able to change magazines quickly, the plastic material inside also prevents the magazine from falling out, This allows the pouch to be used with or without elastic safety, 2 Molleband loops allow the attachment of an extra bag, for the following magazines: 5.56 mm M4, SA80 (not for G36). Dimensions: approx. 7 x 2 x 13.5 cm (LxWxH), Weight approx. 90 g. The WAS equipment bags are equipped with a Molle locking system, i.e.dat the bags can be attached very flexibly to vests, chest harness, backpacks and belts. Made of water repellent 1000D Cordura, all webbing according to US Mil Spec, the materials used have the lowest infrared values (99.8%) and are manufactured to military specifications.

Details
Not in stock - on order

SnigelDesign 1L Bottle pouch -18

€44,95

A sturdy pouch for a 1 liter bottle or for general purposes. The lid opens outwards for quick and secure access. Double zipper pullers. Drain hole at the bottom. Folding closure fastening system makes it possible to attach the pouch vertically or horizontally to any modern vest or belt. Front covered with MOLLE. Bottle not included. Dimensions: H=23, W=12 & D=9 cm. Weight: 100 g.

Details
SnigelDesign Radio pouch -06/15

€27,90
Weight: 80 g Dimensions: L= 17, W= 6, D= 3 cm Fits in: Most handheld radios Fits on: Duty belt, leg platform, specialist backpack the equipment vest and on the trouser belt. Features:
The pouch for many different radios

Low cut construction to leave the speaker free

Padded to protect your radio

Elastic cord with Velcro closure to fit most radios on the market

Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt.

The -15 model has an opening in the bottom for a connector.
Select options Details
SnigelDesign Glove holder -05

€11,95
Weight: 15 g Dimensions: L= 9 & W= 2,5 Fits in: Gloves Fits on: The equipment belt Features:
A simple glove keeper to carry gloves on the belt

Fits most gloves

3 press button adjustment for different sized gloves

Velcro attachment system makes it possible to attach the keeper on any equipment vest or belt

Light weight
Add to cart Details
Agilite Pincer™ Pistol Double Pouch

€52,45
The Agilite Pincer Pistol Pouch is a MOLLE backpack for a quick-to-pull, low-profile elastic pistol magazine for a single double-stacked 9mm pistol magazine (and other similarly sized items). The magwell's patented funnel-shaped design allows you to grab or re-index a magazine with one hand.

Open-top pistol bags are popular, but have inherent flaws. They are often clumsy, clumsy, noisy or impossible to re-index a warehouse with one hand.

The Pincer Pouch is lightweight, has a low profile, is quiet and you can put a magazine in it without hitches.

The Pincer pistol pouch is incredibly versatile, with double-cut laser-cut rear MOLLE to fit perfectly on all combat belts and plate carriers.

Includes height-adjustable flap to secure smaller items like multi-tools, flashlights and more.

Sizing Fits any single double stacked 9mm pistol magazine Also fits multi-tools and small flashlights up to 14*5.5*4cm (5.5*2.2*1.6 inch) Specs Materials:

Laser cut Velcro overlapping panels

Laser cut Squadron™ laminate

500D CORDURA® Mil Spec Tactical Nylon
Select options Details
Warrior Assault Systems Single Open Mag Pouch 7.62mm

€22,95

The Warrior single 7.62 mm open shorts is a great universal Open Mag Pouch that can hold a single SCAR H (7.62 mm x 51 mm) Mag. It can also contain a warehouse for an SR25 G3 or M14. Each pouch has 2 MOLLE arms for attachment at the back and takes up 2 horizontal rows of MOLLE.

Add to cart Details
Masters of Gloves Glove Holder

€18,95
Designed to integrate seamlessly with webbing/MOLLE systems on plate carriers, bags, belts, and more, the MoG glove holder offers unparalleled versatility. Keep your gloves securely in place with the choice of a reliable hook-and-loop closure or a sturdy key ring. This pouch is not only for gloves, but also a true multi-purpose holder, perfect for organizing and carrying ropes, keys, a flashlight, or other essential accessories. Upgrade your gear with the MoG Glove Holder - your solution for convenience and functionality. Main features :

Durable webbing with adjustable hook-and-loop fasteners for both belt and glove holders, keeping out dirt and sand

Easy-to-open glove holder thanks to the additional pull strip

Universal hook and loop system, perfect for easy attachment to plate carriers, backpacks and all belt systems

Strong and durable steel carabiners - multifunctional system for gloves, keys and other equipment

The MoG Glove Holder is available in two eye-catching colors:

All black

Coyote Brown

Unisize model
Select options Details
Agilite Tourniquet Holder

€21,90
The Agilite Tourniquet Holder is an elastic TQ holder that attaches to your Plate Carrier, Battle Belt or other equipment via hook and loop. It has inner mil-specification elastic to hold a turnstile tightly while at hand. An additional Cordura outer layer protects it from abrasion and the elements in demanding environments. The TQ holder has a laser cut loop for ID Patches with the IDF "O" symbol for fast turnstile identification. It also has an eyelet to fasten your turnstile so you never lose it. Sizing The Agilite TQ holder can be attached to any surface with loop, including: Plate carriers, combat straps and chest harnesses. Specs

500D Cordura Mil Spec Elastic webbing

Width: 4.9" Height: 4.5"

Weight: 0.6 oz

Attention! Tourniquet for illustration purposes only, not included.
Select options Details
Snigel Medium Admin Pouch -18

€64,95

A case to store your documentation equipment, maps, pens, etc. in a place where you can reach and see them when you move. Attach it to the front of the vest or chest. Attach your normal pouches to the outside of this case. Compartment for cards, pens and paper. Includes ring binder mechanism with Velcro that can be easily removed. Cords to secure the pins. Half-covered holder for a cyalume, so you can see what you're looking at in the dark with minimal exposure. Water repellent and strong to protect the content. Fold-back mounting system makes it possible to attach the pouch to any equipment or ballistic vest with MOLLE straps. Cable openings in the bottom. Fits: A5 paper and block, pens, rubber, small ruler, small tablet computer (e.g. iPad™ or Panasonic Toughpad FZ-M1™), cards, light sticks and memo cards. Beware: On the equipment vest Weight: 370 g Dimensions: 21 × 27 × 4 cm *Contents in the pouches are purely illustrative. No content included.

Select options Details
Savotta Side pouch 12L

€54,90 – €64,90
Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. The two vertical fastening straps leave an approx. 9 cm wide gap, so you can carry items such as axes, fishing sticks, etc. behind the pouch. Optimal attachment requires a width of four channels and a height of six (min. five) rows of PALS webbing. The compression straps on the side of the backpack, when put on, will prevent any movement of the backpack and its contents. Of our own packs, we recommend the 12L side bag only for the Jääkäri XL. While this is not recommended, you can also make the bag suitable for smaller bags with an absolute minimum of six rows of PALS webbing on the sides, by attaching the bag a step higher and accepting that the bottom becomes a little limp. Examples of use With a capacity of twelve liters, this is a very large side bag, the PALS attachment is five channels wide. Best used on large and high backpacks of 70-100+ liters. Here are some examples of what will fit in such a bag:

A tarp, hammock, duvet and accessories.

A lightweight puff coat, pants and rainwear

A Trangia 27 series stove, fuel, water and lots of stuff to cook.

A Jetboil cooker, a few gas cartridges, water and lots of cooking utensils.

A few days of rations and snacks

A week of spare underwear, intermediate layers and socks.

All kinds of big special stuff that you need to take with you.

Key features

Capacity approx. 12 litres

Covered zipper

Front vertical loops for compression straps

Internal D-ring for attaching small items

Internal flat rear compartment

Reinforced bottom and sides

PALS-compatible mounting system

Water drainage opening at the bottom

5-year material and manufacturer's warranty

Made in Finland/Estonia

Technical specifications

Weight: 320 g

Dimensions: 21 x 45 x 12 cm (W x L x D)

Main material: 500D Cordura (100% polyamide)

Lining: 210D polyamide

Webbing: 100% polyester
Select options Details
Savotta Side pouch 4L

€39,90 – €45,90
Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. Examples of use As a fairly small pouch with only four liters of capacity, no big things fit in here, but this also makes them very suitable for use on small backpacks with limited height / width on the sides. Here are some examples of what will fit in such a bag:

A medium-sized tarp and accessories

A lightweight puffy jacket, rain suit or poncho

A regular 1.5 liter bottle, and some other stuff

An isolated food pot of 0.7 liters

A Jetboil burner and a gas cartridge

Key features

Capacity approx. 4 litres

Covered zipper

Vertical front signalling loops for compression straps

Internal D-ring for securing small items

Internal flat rear compartment

Reinforced bottom and sides

PALS-compatible mounting system

Water drainage tulip at the bottom

5-year warranty on material and craftsmanship

Made in Finland/Estonia

Technical specifications

Weight: 200 g

Dimensions: 13 x 30 x 9 cm (W x L x D)

Main material: 500D Cordura (100% polyamide)

Lining: 210D polyamide

Webbing: 100% polyester
Select options Details
Savotta Trinket Pouch 15x20cm, standalone

€15,90
Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties

Three sizes: 10×15, 15×20 and 20×30 cm

Translucent mesh material

Zipper from corner to corner

Two 25 mm wide webbing loops in the corners

Color options for easy recognition

Velcro fastener (hook back) or plain (stand-alone)

5-year material and manufacturing warranty

Made in Finland/Estonia

Technical characteristics

Weight: - Standalone 10×15 cm: 32 g - Standalone 15×20 cm: 54 g - Standalone 20×30 cm: 76 g

Main material: 100% polyester

Webbing: 100% polyester
Select options Details
Savotta Trinket Pouch 10x15cm, standalone

€12,90
Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties

Three sizes: 10×15, 15×20 and 20×30 cm

Translucent mesh material

Zipper from corner to corner

Two 25 mm wide webbing loops in the corners

Color options for easy recognition

Velcro fastener (hook back) or plain (stand-alone)

5-year material and manufacturing warranty

Made in Finland/Estonia

Technical characteristics

Weight: - Standalone 10×15 cm: 32 g - Standalone 15×20 cm: 54 g - Standalone 20×30 cm: 76 g

Main material: 100% polyester

Webbing: 100% polyester
Select options Details
Warrior Assault Systems Single Quick Mag

€29,90

The Single Quick Mag is a versatile multifunction loader bag that can hold a variety of 5.56mm warehouses, including P-Mags. The Quick Mag Pouch from Warrior Assault Systems can also contain 7.62 mm x 39 mm AK mags M14 FAL etc. The size can be adjusted by means of a laced elastic cord that is strung through the side of the bag. Comes with optional bungee retention tabs as seen on the Warrior Assault Systems Open Mag bags for operators who need extra security from their warehouses.

Add to cart Details
SnigelDesign Grenade pouch -10

€34,95 – €39,95
A versatile, light and easy to use pouch for different kinds of grenades which is simple, quiet and easy to access. tab to open the lid. You can now easily grab a grenade
Weight: 90 g Dimensions: L= 14, W= 9 & D=7 Volum= 0,6L Fits in: Grenades, smoke grenade, 2x40 mm grenades, field dressing, GPS, compass or other small items Features:

Attaches with the tuck back system to the equipment vest

Pull the large tab to open the flap

The tab is designed to be easy to use with gloves on

The grenade pouch attaches safely on both belt and vest. A grenade sits safely in the pouch with the lid closed

The lid closes securely with two press buttons for double safety. An elastic band keeps the grenade in place while the lid is open

There are three positions for the press buttons to accommodate small or large grenades

The elastic holds any possible movable parts of the grenade in place so that they do not make any noise or rattle
Select options Details
SnigelDesign SMG Magazine pouch -00/14

€32,00
Weight: 100 g Dimensions: L= 23, W= 9 & D= 4 Fits in: 1 MP5 magazine or telescopic baton Fits on: Duty belt, leg platform, specialist backpack the equipment vest and on the trouser belt. Features:
Very fast access to your submachine gun magazine

Stores one magazine or telescopic baton

Store the magazine with the top up, pull it and insert it with one smooth movement- It can't be done faster

Elastic band keeps the content secure when the flap is open

Flap for added security when fast roping or similar

Velcro Vertical/Horizontal attachment system makes it possible to attach the pouch on any equipment vest or belt.

22-00245-01-000, SMG magazine pouch -14is an upgarded version of the -00 pouch which takes less space and is lighter, but otherwise has teh same functions as before.
Select options Details
SnigelDesign 5.56 Elastic pouch 1.0

€32,45
A low profile, safe and versatile elastic pouch for all kinds of equipment that is to be carried on a trouser belt or tightly fit on an equipment vest.

Two outside compartments for pistol or SMG magazines, OC spray or any other smaller gear.

A full width inner compartment for a radio, 7,62 or 5,56 mm magazine or similar.

The pouch is made in an elastic fabric to stay as flat as possible and keep the content rattle free and secure.

Weight: 50 gr Dimensions: 8x15x2 cm
Select options Details
5.11 Tactical Flex Admin Pouch

€39,95
With the smart features of the 5.11 Tactical Flex Admin Pouch, you can store your tools organized and safely. In addition, it can be attached to all platforms with the Flex-HT™ Mounting System's 1/2" webbing ladder and 3/4" TPU coated straps. Dimensions 11.4 x 15.8 x 2.5 cm Attributes

Minimalistic, low profile and lightweight admin pouch

Horizontally oriented laser cut MOLLE loop platform

Main compartment with zipper and shock cord for adjustable opening factor up to 180 degrees

Drawstring with heat shrink tubing and a paracord loop trigger holder

2 small and 1 large mud bag on the back panel with elastic bands

Adjustable bungee cord on front panel for phone or other accessories

Extra slip bag behind front panel

Flex-HT™ 1/2" webbing ladder for more weaving possibilities

Flex-HT™ 3/4" TPU coated strap for flexibility on all weaving platforms

Pull tab for quick detachment of Flex-HT™ straps

Flex Hook Adaptors convert the bag to a hook/loop attachment (2 included)

Double layer water resistant 500D Nyl
Select options Details
Agilite Six Pack Fanny Pack Conversion Strap

€19,95

The Fanny Pack Conversion Strap connects to the Agilite Six Pack™ in seconds and turns it into a tactical fanny pack for everyday use. *Fanny Pack not included, images only as an example.

Select options Details
Not in stock - on order
Savotta Elastic organizer X3

€8,90
Savotta organizer inserts with hook back and elastic loops for stuff and things in different shapes and sizes. Provides quick on-off attachment to all loop surfaces in bags, packages, pouches etc. DESCRIPTION Hook to any loop surface to add a versatile organization for a variety of equipment, such as first aid supplies, pens, tools, etc. that you want to keep neatly and quickly accessible in your backpack or purse. Each organizer has two small pin loops and a varying number of large and flat loops. The large loops are 40 mm wide and 20 mm high, giving them a circumference of 120 mm. This is sufficient for a lot of ordinary items such as first aid supplies (bandages, turnstiles etc.), tools, battery cases, headlights, large chocolate bars etc. Under each large loop is a flat loop to hold smaller items such as pens, lighters, small chocolate bars etc. firmly in place. These also work when the outer large loops are full, leaving there are two levels to organize on. The pen loops at the ends are just that, ideal for pens, glowsticks etc. Beware: although the elastic band stretches a lot, it can be stretched by putting too large things in a too small loop. This is how elastic webbing is, now you know, so pay attention. Attributes

Velcro fastener

Organizes all kinds of small things

Two small pen loops

2-4 large and flat loops, depending on the variant

25 mm (1") wide elastic band

50 mm webbing with hook backing

5-year material and manufacturing warranty

Made in Finland &Estonia

Technical specifications

X2: weight 16 g, dimensions 11 x 5 cm (L x W)

X3: weight 22 g, dimensions 16 x 5 cm (L x W)

X4: weight 28 g, dimensions 20 x 5 cm (L x W)

Elastic band: 74% polyester and 26% rubber

Webbing: 100% polyester
Details
Not in stock - on order
Savotta Elastic organizer X2

€7,90
Savotta organizer inserts with hook back and elastic loops for stuff and things in different shapes and sizes. Provides quick on-off attachment to all loop surfaces in bags, packages, pouches etc. DESCRIPTION Hook to any loop surface to add a versatile organization for a variety of equipment, such as first aid supplies, pens, tools, etc. that you want to keep neatly and quickly accessible in your backpack or purse. Each organizer has two small pin loops and a varying number of large and flat loops. The large loops are 40 mm wide and 20 mm high, giving them a circumference of 120 mm. This is sufficient for a lot of ordinary items such as first aid supplies (bandages, turnstiles etc.), tools, battery cases, headlights, large chocolate bars etc. Under each large loop is a flat loop to hold smaller items such as pens, lighters, small chocolate bars etc. firmly in place. These also work when the outer large loops are full, leaving there are two levels to organize on. The pen loops at the ends are just that, ideal for pens, glowsticks etc. Beware: although the elastic band stretches a lot, it can be stretched by putting too large things in a too small loop. This is how elastic webbing is, now you know, so pay attention. Attributes

Velcro fastener

Organizes all kinds of small things

Two small pen loops

2-4 large and flat loops, depending on the variant

25 mm (1") wide elastic band

50 mm webbing with hook backing

5-year material and manufacturing warranty

Made in Finland &Estonia

Technical specifications

X2: weight 16 g, dimensions 11 x 5 cm (L x W)

X3: weight 22 g, dimensions 16 x 5 cm (L x W)

X4: weight 28 g, dimensions 20 x 5 cm (L x W)

Elastic band: 74% polyester and 26% rubber

Webbing: 100% polyester
Details

Title