- Easy to use
- Cleans very effectively
- Fast results
- Safe for the drum steel
-
Fluna Gun Cleaner is a high-performance running cleaning paste. It removes gunpowder and metal such as lead, copper or Tombak from the barrel and can be used for smooth and drawn barrels of pistols or long weapons. Scopes For the fast, mechanical cleaning of drawn and smooth running of rifles, pistols and revolvers. Do not apply to polished or otherwise treated metal surfaces, on plastic or wood. Attributes -
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
SPECIAL DEGREASER & CLEANER Fluna GunDegreaser is a special cleaner and degreaser for removing oils, fats, waxes, but also pillows and other combustion residues. Fluna GunDegreaser can be used manually or in an ultrasonic bath. Attributes- Cleans without residue and degreases at the same time
- Easy to use, does not affect rubber and plastics
-
With Fluna Gun Oil we have developed a pistol oil that, as a CLP product, is a cost-effective alternative to the premium product Fluna Gun Coating. Fluna Gun Oil is a weapon oil of the latest generation and cleans, lubricates and maintains metal parts. Fluna Gun Oil is free of heavy metals and free of PCB, PCT and phenol. USE OF THE FLUNA PISTOL OIL Fluna Gun Oil should always be applied to the cleaned surface. It is not necessary to degrease the surface before application. For external application on pistols, the aerosol product is more suitable due to the spray pattern. For precise application, e.g. on sliding guides, use the liquid product with the practical dropper. Pistol oil is applied to the surfaces to be treated. PISTOL CLEANING WITH FLUNA TEC The constant and careful cleaning and care of all parts of the weapon guarantees the greatest pleasure and success in both the sport and the hunt. Fluna Tec offers a special product for every application. The Fluna Tec product family has been developed from practice and is used worldwide by professionals and ambitious amateurs. -
AEROSOL FOAM CLEANER Fluna TFT/optics foam cleaner is a special foam for cleaning all kinds of optics, binoculars, rifle scopes, spotting scopes. Fluna TFT/Optical Foam Cleaner also cleans flat screens such as TFT - LCD monitors, laptop screens, televisions, PDAs, navigation devices, glass and mirrors. Fluna TFT/optical foam cleaner can also be used on plastic and rubber surfaces. Fluna TFT/Optical Foam Cleaner removes all household dirt such as dust, nicotine, insects, grease stains, fingerprints, patina from hand sweat and dust. Attributes- Extremely high stability
- High cleaning power
- Does not penetrate the housing
- Cleans without leaving residue
- Contains no alcohol
- Simple application
-
Not in stock - on order
The CTB Dump Pouch QR is designed to store everything from used rifle magazines to evidence found in the field during amphibious operations. Once closed, it's small enough to be attached to a belt or tactical vest without adding much bulk. Once opened, it can house up to six AR-15 rifle magazines. The opening can be adjusted at will thanks to the elastic cord that runs along it. This pouch is equipped with the DUE EMME Quick Release buckle making it easy to open, especially useful when wearing thick gloves or during night or water operations. The MIL-C-8061 heavy mesh fabric construction effectively wicks away water and debris after a coastal insertia or any kind of water activity, keeping the user light and efficient. The FROG.PRO CTB (Cross The Border) line is specifically designed to provide amphibious special mission units with special equipment that, thanks to special fabrics and specific design choices, improves performance and survivability during operations involving working in wet environments, such as marine, fluvial, rainy or snowy areas. The LAHYCO composite fabric used for the main parts of the bag and flap is highly hydrophobic, which translates into greater mobility and lighter weight in wet environments. The LAHYCO fabric is also partially FR, and offers firmer protection against cutting, wear and tear. Our attention to detail, combined with a personalized design, offer a unique product that reflects our commitment to "state of the art" military equipment. Weight: 175 g Dimensions when closed: 14 x 8 x 5 cm Dimensions opened: 25 x 15 x 10 cm -
Not in stock - on order
The Micro Hand Cuff Key Retractor is the smallest Retractor we build. The Velcro attachment can be worn on a service belt or belt (under the service belt). The Velcro strap takes up minimal strap space. Keys can be put in the bag. -
Not in stock - on order
The GearKeeper RT4-5171 is an extendable safety system with retraction function for small devices up to 170 g, such as flashlights, laser pointers, cutters, scissors, mobile phones, GPS, etc. However, depending on the weight, the drawstring does not prevent the device from falling to the ground when you release it, but it does prevent it from being lost. At the end of the rope is a keychain, which is attached to the end of the rope with a quick release. The rope is made of extremely wear-resistant Spectra nylon. The GearKeeper RT4-5171 has two MOLLE brackets - a plastic MOLLE bracket that can be rotated 360° on the back of the case and a MOLLE-compatible Velcro mount. With the Velcro closure, the GearKeeper can also be attached to loops or straps. The unused mounting option can be removed. Material- Housing: polycarbonate;
- Rope: Spectra nylon,
- Keychain: stainless steel
- Robust polycarbonate housing.
- Extremely wear-resistant drawstring made of Spectra nylon.
- Screw-off plastic MOLLE bracket on the back.
- Removable MOLLE-compatible Velcro mounting loop.
- Stainless steel keychain with quick release.
- Saltwater resistant.
- Retraction force for objects up to approx. 170 g.
- Tensile strength drawstring: approx. 27 kg.
- Rope length: approx. 91 cm
- Housing dimensions: approx. 51 x 41 x 20 mm (H x W x D).
- Weight: approx. 65 g.
- Made in the US.
-
Extendable securing system with retraction function for equipment up to 85 grams, rope length approx. 91 cm, O-ring, removable. The GearKeeper RT2-5830 is ideal for storing keys. Of course, it can also hold other objects weighing up to approx. 85 grams, such as flashlights, laser pointers, scissors, mobile phones, GPS and other equipment with an O-ring. Depending on the weight, the drawstring doesn't prevent the gear from falling to the ground when you let go, but it does prevent loss. The safety lanyard is a nylon-coated stainless steel cable. This model has a detachable holder with O-ring. Predicted breaking point: at a load of about 27 kg. Retraction force: for objects up to approx. 0.085 kg. Rope length: approx. 91 cm Housing: approx. 5 x 3.8 x 1.4 cm (H x W x D) The Gearkeeper is part of the standard equipment of the US Navy Seals. Made in the US. -
Not in stock - on order
The GearKeeper RT4-5170 is a retractable safety system with retraction function for small work tools up to 85 g, such as compass, pocket knife, scissors, etc. However, depending on the weight, the pull rope does not prevent the equipment from falling to the ground if you let go, but loss is prevented. At the end of the rope is a key ring, which is attached to the end of the rope with a quick release. The rope is made of extremely durable Spectra Nylon. The GearKeeper RT4-5170 has two MOLLE holders - a 360° rotatable plastic MOLLE holder on the back of the case and a MOLLE-compatible Velcro option. With the Velcro option, the GearKeeper can also be attached to loops or straps. The mounting option that is not in use can be removed. Material Housing: Polycarbonate; rope: Spectra nylon, keychain: stainless steel Details:- Robust polycarbonate housing.
- Extremely wear-resistant Spectra Nylon drawstring.
- Removable plastic MOLLE attachment on the back.
- Detachable MOLLE-compatible Velcro fastening loop.
- Stainless steel key ring with quick release.
- Resistant to salt water.
- Retraction force for objects up to approx. 85 g.
- Pulling force of the drawstring: approx. 27 kg.
- Drawstring length: approx. 91 cm
- Housing dimensions: approx. 51 x 41 x 20 mm (H x W x D).
- Weight: approx. 64 g.
- Made in the US.
-
Retractable belt system with retraction function for equipment up to 255 grams, rope length approx. 81 cm, key ring. The 360° rotatable GearKeeper RT4-5174 is suitable for objects weighing up to approx. 255 grams, such as a flashlight, radio, mobile phone, GPS, rangefinder and other equipment. Depending on the weight, the tow rope does not prevent the equipment from falling to the ground when you let go, but the loss is prevented. With quick-release buckle at the end of the rope to quickly separate the object from the safety cord. The safety cord is a stainless steel cable sheathed with nylon. Material Case: Polycarbonate; Rope: Spectra Nylon, Keychain: Stainless Steel Breaking point: at approx. 27 kg load. Retraction force: for objects up to approx. 0.255 kg. Cable length: approx. 81 cm Housing: approx. 5 x 4 x 1.5 cm (HxW x D) The Gearkeeper is part of the standard equipment of the US Navy Seals. Made in the US. -
Not in stock - on order
This light everyday multi-tool for everyday use gets an unexpected upgrade with professional tools that are reliable. Made of stainless steel and available in multiple colors. This tool has a precise point tong and 8 other components that are attached in a handy butterfly style. Meet the tough but light Crucial. With professional components of a precise point tong and eight other carefully selected features, this everyday essential multitool is one of the always diverse, ever-popular Gerber multitools series. PREPARED FOR ACTION The Crucial steps straight forward to respond to the surprise obstacles that life so routinely unites. It offers the partially toothed blade and the Phillips and flat drivers, all of which are liner locking for safe application, to address the business end of everyday problems. Use the partially serrated knife to cut cables or open packages, and twist loose screws around the house, office or work location with the cross-head screwdrivers or flat head. COMPACT BUT NOT GRACEFUL In addition to the knife and screwdrivers, the Crucial contains a nice long tangentang, V-cutter cutters, a carbine hook and an ingenious pocket clip, making this tool the most convenient daily multitool. The tools' handles are ergonomically curved for a firm grip and a larger torque. The sleek, lean Crucial combines the precise range of tools with the unobtrusive 3.5-inch frame and ensures that you tackle problems without fear. -
Not in stock - on order
Designed to create a custom fit for a wide array of product combinations, the CustomFit Dual Sheath holds two items plus a pen. The patent-pending, richly featured sheath includes a quick access back panel that allows the user to customize it to perfectly fit the tools selected for the tasks of the day. Quiet Deploy™ technology is activated by simply pulling down the front tab for stealth-like access – they’ll never hear you coming. * Goods shown in the sheath not included. Shipping within 24 hours! -
Not in stock - on order
With no less than 9 functions, the new Gerber Devour multifunctional spork is the ultimate tool for cooking, eating and cleaning. The feather-light combination of fork and tool hook together for efficient carrying convenience and easy use. functions: Serrated package opener Can opener Bottle opener Crowbar Flat screwdriver [klein] Flat screwdriver [groot] Extra deeply shaped tablespoon Fork Flat edge for cutting/scraping Textured grip for optimal grip Specifications: Length: 17,78 cm Width: 2.54 cm Weight: 20.92 grams -
Not in stock - on order
The Dime multitool impresses with its small size and light weight. It can be easily attached to the key ring and offers many useful tools for everyday use. Details Small and easy to store with lots of tools. 1) Needle nose pliers 2) Spring pliers 3) Wire cutter 4) Tweezers 5) Bottle opener 6) 3.5 cm leaf 7) Package opener 8) Scissors 9) Slot screwdriver 10) File 11) Small screwdriver 12) Keychain Weight: 70 g -
Not in stock - on order
The Guardian Angel Elite® Series is designed for professionals who need visibility and versatility on the job. Developed with the latest LED technology, making all our GA Elite® Series personal safety aids visible up to more than 5 miles. Departments and organizations in the U.S. and around the world have made the Elite® device the standard equipment for their employees, so they can work more safely and productively. Our latest 2022 Elite device includes many new enhancements based on customer feedback.Elite® Flash Patterns
Flash patterns:- Constant on | LEDs front, rear or top
- Standard operation | Front on, back flashing
- Emergency lighting | Both sides and top flashing
- WigWag Left-right Alt. Flashing
- Blinking from right to left
- SOS | 3x short/long & 3x short flashing
- Battery Indicator | Continuous light indicator
Magnetic mounting system
Guardian Angel Devices & Mounting Options are equipped with our patented magnet mounting system. They both contain a built-in neodymium rare earth magnet. Put them together and you have a super-strong compound that can withstand a force of 20 pounds. The Guardian Angel is the most versatile safety equipment you can have. With the right accessories, you can take it with you wherever you go. With more than 24 different mounting accessories, you maximize your safety potential, maximize your light, maximize your capabilities.Battery & charging
How can I charge it? USB Type-A Charging Cable How long does it take to charge? About 50 minutes Where do you charge it? Charging port on the side of the device, allowing hard mounting on the bottom of the device How long does a charge last? 1-150 hours What is the battery life? Minimum 3000 cycles You determine your assets. Your charge varies depending on the brightness setting and the light mode used. GA Tip: Check battery life at any time by pressing and holding the "back" button.Buttons/Functions
- 360° lighting patterns - 4 individual lighting controls - 4 different brightness settings - (on selected models) Red work light function for low-light environments GA Tip: Press and hold the work light button 3s for "standard operating mode".IN STOCK, ONLY DELIVERY AFTER PROOF OF ACTIVE MEMBERSHIP AS A POLICE
-
Not in stock - on order
200 ml Gunex oil spray is very effective, universal and environmentally friendly. Gunex oil never hardens and is suitable for long-term storage. -
The 3M ™ PELTOR ™ SportTac ™ is an intelligent active hearing protection, specially developed for hunters and shooters. The soft adjustment of the level-dependent function of the hearing protection gives the user a particularly pleasant sound reproduction and less interference. The electronics react at light speed and protect the user's hearing against loud impulse noises.- Soft, level-dependent operation that eliminates sudden noise interruptions.
- Replaceable caps make it easy to change the color.
- Equipped with automatic switch-off function.
- Foldable headband for easy storage.
- Audio input for external radio
- Audio input for external radio
- Running time: approximately 600 hours
-
![Helikon-Tex E&E Pouch® [U.03]](https://shop.afullmetaljacket.com/wp-content/uploads/2023/04/MO-U03-CD-ee_pouch_u03_-_cordura-6-1000_1.jpg)
![Helikon-Tex E&E Pouch® [U.03]](https://shop.afullmetaljacket.com/wp-content/uploads/2023/04/mo-u03-cd-11_1.jpg)
A timeless classic based on a revised design by the British Special Forces. This large bag is suitable for survival and bushcraft equipment, water bottles, food rations and the like. At the back is a cover for a folding saw, knife and axe. MOLLE/PALS compatible. Features:- Integrated sleeve for knife/axe/folding saw at the back of the pouch
- Designed in collaboration with Survivaltech.pl
- with buckle
- Internal loop panel, 3 flat pockets and loop for small items with bottom hook &loop
- PALS webbing on front and sides
- Compatible with DUTY BELT/PALS/MOLLE
- Two d-rings for carrying strap (not included)
- Weight [g] 202
- Dimensions 19.5 x 15 x 7 cm / 7.7 x 5.9 x 2.8 in
- Contents [l]2
- Material 100% Nylon
- EUROPEAN PATENT No. 002994368-0001
-
Not in stock - on order
Hogue grip cover for semi-automatic pistols. Scientifically designed to ensure you have more control over your weapon. Made for larger firearms with a grip frame with a mainly straight back strap * = POSSIBLE TRIMMING REQUIRED • AK-47: Wooden handle without finger grooves • AMT: Automag II, Automag III, Automag IV, Automag V • AR-15: Handles without finger grooves • Beretta: 8000 Cougar, 8040 Cougar, 8040 Cougar F, 8045, 87 Target, 92 FS, 92 FS Inox, 92 Centennial, 92 FS Fusion, 92 G, M9A3, 96 A1, • Beretta: 92 G-SD, 92 Brigadier, 92 Brigadier INOX, 92 Vertec INOX, 92 A1, M9, M9A1, 92 Compact *, • Beretta: 92 Compact Inox *, PX4 Storm SD Type F • Bernadelli: P018S • Bersa: Thunder 9, Thunder 9 Pro, Thunder 40 Pro, BP40CC, BP9 • Browning: Hi-Power, Hi-Power Clones • Canik: TP9 • Caracal: CP660, CP661 * • Chiappa: M9-22 CZ: 75, B, BD, B-SA Variants, SP-01, SP-01 Tactical, 75 Shadow Tac II, 75 Shadow Target II, 75 Tactical Sport, 75 TS Czechmate, P-07*, • CZ: P-09, P-10, 85, 85 Combat, 2075 Rami *, 52, 2075 Rami BD *, 97, 97 BD, 100, 75 Compact *, 75 PCR Compact *, 75 P-01*, • CZ: Compact SDP *, P-06 * • Colt: 2000 • EAA: Witness, Gold Custom Xtreme *, Limited Custom Xtreme *, Stock II Xtreme, Stock III Xtreme, Match Xtreme, Elite Stock III, • EAA: Steel Full Size, Polymer Full Size, Polymer Carry, Elite Gold Team, Elite Limited, Elite Limited Pro, Elite Match, Elite Stock III, • EAA: Elite Stock I, Elite Stock II, Hunter, Match • FEG: P9M, Hi-Power Clones • FNH: FN9, FNS40, FNX40, FNX9, FNS-9, Hi-Power, MKIII also, FNX45, Forty-Nine, FAL, DSA Rifles • Heckler & Koch: VP9, VP40, P30, P30L • High standard: Victor, Olympic, Olympic Trophy, Supermatic Trophy, 10X-Victor, Supermatic Citation • Jericho: 9 mm, 941 • Kel-Tec: RDB, CMR-30, RFB, KSG • Lama: Omni Magnum Research: MR9 Eagle, MR40 Eagle, Baby Eagle III Polymer Pistols, Baby Desert Eagle III Steel Pistols Mossberg: 590 Shockwave (must be installed from the tip of the receiver's handle) • Remington: RP9 • Ruger: SR9, SR9E, SR40, SR45 • Sarsilmaz: K2P, B6, CM9, ST9, K2, K12, Kilinc 2000, P8, B6P * • SIG SAUER: P556XL Pistol, P522 Pistol, 556, 522, P250 Full Size, P320 Full Size, 228/229 *, P250C *, P320C *, M11-A1 *, SP2022 * • Smith & Wesson: 39, 52, 59, 410, 411, 439, 459, 539, 559, 639, 645, 745, 909, 910, 915, 952, 1006, 1026, 1046, 1066, 1076, 1086, 3904 , • Smith & Wesson: 3906, 4003, 4004, 4006, 4026, 4043, 4044, 4046, 4505, 4506, 4526, 4546, 4563, 4566, 4567, 4576, 4583, 4586, 5903, • Smith & Wesson: 5904, 5905, 5906, 5906 Super 9, 5924, 5926, 5943, 5944, 5946, 5967, 6904 *, 6906 *, 6926 *, 6944 *, 6946 *, SW40F, SW9 • Springfield: P9 • Steyr: Model 28, Model 30, Model 31, Firestar Model 40, Firestar model 43 Firestar Model 45 • Steyr: M40, M9, L-A1, M-A1, C-A1 • Stoeger: Cougar, Cougar (compact versions) * • Taurus: 92, 92C *, 99, 100, 101, PT957 • Tokarev: TT-30, TT-33 • Walther: P99, PPQ, PPX, CCP -
Not in stock - on order
Hogue grip cover for semi-automatic pistols. Scientifically designed to ensure you have more control over your weapon. Do not use grab-protection firearms, such as Colt .45 pistols or Para Ordnance frames. * = POSSIBLE TRIMMING REQUIRED Astra: A-100, Constable II * • Beretta: PX 4 Storm Full, PX4 Storm Inox, PX4 Storm Compact & Subcompact * • Browning: Buckmark, Challenger II, BDA * • Colt: Double Eagle • Daewoo: DP51 • FNH: FiveSeven, FNS-40C *, FNP-9, FNP-40, FNP-45 GLOCK: 17, 17L, 18, 19, 20, 21, 22, 23, 24, 25, 26*, 27*, 28*, 29*, 30*, 31, 32, 33*, 34, 35, 37, 38, 39*, 40, 41 Heckler & Koch: VP 70-Z, HK 45 / Tactical, HK 45 Compact / Tactical, Mark 23, P2000, USP, USP Compact * / Tactical • Intratec: TECDC9, TEC22 • KBI: BK, Compact GKK-92C • Kel-Tec: PLR-16, PLR-22, PMR-30, Sub-2000 • Magnum Research: Baby Desert Eagle II polymer pistols, Baby Desert Eagle II steel pistols, Makarov Ruger: P85, P89, P90, P91, P93, P94, P95, P97, P345 Smith & Wesson: M&P 45, M&P 9C *, M&P 40C *, M & P45C *, Sigma 9 mm, Sigma 40, SD9, SD40, SD9 VE, SD40 VE • Sarsilmaz: 136, ST10, K2-45 • SIG SAUER: P220, P225, P226, Mosquito, P227, MK25, P210, SP 2340 * • Steyr: GB • Taurus: 24/7 (and G2 variant) full size, 24/7 C*, 809C *, 840C *, 809, 840, 845, PT945 • Walther: P38, P88, P1 • Zastava: 99 -
Hogue grip cover for semi-automatic pistols. Scientifically designed to ensure you have more control over your weapon. Do not use grab-protection firearms, such as Colt .45 pistols or Para Ordnance frames. * = POSSIBLE TRIMMING REQUIRED Astra: A-100, Constable II * • Beretta: PX 4 Storm Full, PX4 Storm Inox, PX4 Storm Compact & Subcompact * • Browning: Buckmark, Challenger II, BDA * • Colt: Double Eagle • Daewoo: DP51 • FNH: FiveSeven, FNS-40C *, FNP-9, FNP-40, FNP-45 GLOCK: 17, 17L, 18, 19, 20, 21, 22, 23, 24, 25, 26*, 27*, 28*, 29*, 30*, 31, 32, 33*, 34, 35, 37, 38, 39*, 40, 41 Heckler & Koch: VP 70-Z, HK 45 / Tactical, HK 45 Compact / Tactical, Mark 23, P2000, USP, USP Compact * / Tactical • Intratec: TECDC9, TEC22 • KBI: BK, Compact GKK-92C • Kel-Tec: PLR-16, PLR-22, PMR-30, Sub-2000 • Magnum Research: Baby Desert Eagle II polymer pistols, Baby Desert Eagle II steel pistols, Makarov Ruger: P85, P89, P90, P91, P93, P94, P95, P97, P345 Smith & Wesson: M&P 45, M&P 9C *, M&P 40C *, M & P45C *, Sigma 9 mm, Sigma 40, SD9, SD40, SD9 VE, SD40 VE • Sarsilmaz: 136, ST10, K2-45 • SIG SAUER: P220, P225, P226, Mosquito, P227, MK25, P210, SP 2340 * • Steyr: GB • Taurus: 24/7 (and G2 variant) full size, 24/7 C*, 809C *, 840C *, 809, 840, 845, PT945 • Walther: P38, P88, P1 • Zastava: 99 -
Hogue grip cover for semi-automatic pistols. Scientifically designed to ensure you have more control over your weapon. Do not use grab-protection firearms, such as Colt .45 pistols or Para Ordnance frames. * = POSSIBLE TRIMMING REQUIRED Astra: A-100, Constable II * • Beretta: PX 4 Storm Full, PX4 Storm Inox, PX4 Storm Compact & Subcompact * • Browning: Buckmark, Challenger II, BDA * • Colt: Double Eagle • Daewoo: DP51 • FNH: FiveSeven, FNS-40C *, FNP-9, FNP-40, FNP-45 GLOCK: 17, 17L, 18, 19, 20, 21, 22, 23, 24, 25, 26*, 27*, 28*, 29*, 30*, 31, 32, 33*, 34, 35, 37, 38, 39*, 40, 41 Heckler & Koch: VP 70-Z, HK 45 / Tactical, HK 45 Compact / Tactical, Mark 23, P2000, USP, USP Compact * / Tactical • Intratec: TECDC9, TEC22 • KBI: BK, Compact GKK-92C • Kel-Tec: PLR-16, PLR-22, PMR-30, Sub-2000 • Magnum Research: Baby Desert Eagle II polymer pistols, Baby Desert Eagle II steel pistols, Makarov Ruger: P85, P89, P90, P91, P93, P94, P95, P97, P345 Smith & Wesson: M&P 45, M&P 9C *, M&P 40C *, M & P45C *, Sigma 9 mm, Sigma 40, SD9, SD40, SD9 VE, SD40 VE • Sarsilmaz: 136, ST10, K2-45 • SIG SAUER: P220, P225, P226, Mosquito, P227, MK25, P210, SP 2340 * • Steyr: GB • Taurus: 24/7 (and G2 variant) full size, 24/7 C*, 809C *, 840C *, 809, 840, 845, PT945 • Walther: P38, P88, P1 • Zastava: 99 -
A complete individual black first aid kit (IFAK). The content is packed with products certified in France. CHARACTERIZE:- YKK horseshoe zipper bag
- Velcro® panel for identification on the front
- Filled weight: 660 g
- Dimensions: 22 x 13 x 10 cm
- RMT ratchet turnstile 1.5 inch black (width 3.8 cm like C.A.T) with instructions for use in English.
- FTS Hydrogel Valve Dressing
- CWS-6 Waterproof hydrogel bandage 15 x 15 cm
- WOUNDCLOT 8 x 20 cm Last generation hemostatic bandage
- 10 cm emergency pressure bandage (expires in 8 years)
- Pair of black nitrile gloves for single use
- Pack vacuum pressed mesh
- Mini roll hypoallergenic plaster
- 3 sterile non-adhesive compresses 10 x 7 cm
- Pack of Urgo bandages in a ziplock (3 of fingers, 3 of 2.5 x 7.5 cm and 3 of 9.5 x 5 cm).
- Mylar survival blanket 137 x 213 cm
- Sterile 28Fr nasopharyngeal tube (7mm internal) supplied with lubricant
- Gesco scissors (black) that are autoclavable.
- In accordance with TCCC / compatible with COMBAT LIFEGUARD settled.
- CE marked / class IIB material
- Made in the USA
-
Not in stock - on order
JTG - Infidel Patch, swat color. "Ready to patch", JTG - Infidel Patch with velcro back. size: 50 x 28 mm Specially crafted, top-quality flexible PVC patch in 3D.- Cast contour for shape
- Velcro hook on the side is stitched on PVC for high durability and years of use
- Designed to be attached to nylon gear and clothing with Velcro tabs on the side
- Perfect to add an extra to your patrol cap, Asault Pack, Fleece - Softshell or other jacket and more!
-
5.56 Triple Direct Action Mag Pouch from Invader Gear in Wolf Grey. -
The Invader Gear Dump Pouch Foldable is a foldable multifunctional collection bag with cord closure and two cord stoppers. You attach the Invader Gear Dump Pouch Foldable with two MOLLE straps to your tactical vest or belt and thus have a handy baby carrier with you at all times to not only offer extra storage space, but also, for example, to temporarily clean up your waste. -
Lightweight and practical, the GrimLoc™ carabiner grafts onto a 25mm wide MOLLE strap or loop. With a force of 15 kg, you can easily hang small equipment with it. Compared to the classic carabiner, it is lighter, quieter, does not shine or scratch and is very easy to open with gloves. CHARACTERIZE:- Strong and lightweight polymer material
- Quiet and discreet to deal with
- Easy to use with gloves
- Can be used with one hand
- Self-cleaning mechanism
- Fits 2.54 cm wide straps.
- 15 Kg resistance
- Dimensions: 54 x 40 mm
- GhilieTEX™ treatment to reduce infrared signature (except black)
- Sun and water resistant
- Sold per piece
- * Do not use to rappellen
-
TW Nexus QASM Picatinny RAMP in black, the Quick Attach Surface Mount - Rail Accessory Mounting Platform. The Picatinny QASM-RAMP is designed to mount, hold and/or organize all your mountable Picatinny accessories. The new Picatinny QASM-RAMP can be used in a variety of scenarios, whether it's mounting your incident camera, flashlight, organizing your range bag, or storing your optics and other accessories. The Picatinny QASM-RAMP has a large base area for supporting heavy accessories and is designed to extend your mounting capabilities beyond your weapons and helmet rails. -
Blood Type O Negative Patch, Black with Velcro back. Size: 50 x 26mm Specially manufactured top quality flexible PVC patch in 3D. - Shaped contour for shape - The burdock hook side support is stitched on PVC for high durability and years of use - Designed to be attached to any nylon equipment and clothing with the side clips of the Burdock Loop - Perfect to add a little edge to your patrol cap, beanie hat, Attack Suit, Fleece - Softshell or other jacket, and more! This "Blood Type" patch adds an extra touch to the material you are using. -
Blood type O Negative Positive, Black with Velcro back. Size: 50 x 26mm Specially manufactured top quality flexible PVC patch in 3D. - Shaped contour for shape - The burdock hook side support is stitched on PVC for high durability and years of use - Designed to be attached to any nylon equipment and clothing with the side clips of the Burdock Loop - Perfect to add a little edge to your patrol cap, beanie hat, Attack Suit, Fleece - Softshell or other jacket, and more! This "Blood Type" patch adds an extra touch to the material you are using. -
Patch of Jackets To Go for the blood type A Negative. Velcro rear. Size: 52 x 27 mm Weight: 4 g Shipping Weight: 5g -
Patch from Jackets To Go for blood type A Positive. Velcro rear. Size: 52 x 27 mm Weight: 4 g Shipping Weight: 5g -
JTG blood group patch B NEG, blackops, 50x50mm A variety of details realized in 3D, typical of a JTG patch, the realization will inspire you. Specially manufactured high-quality and flexible rubber patch in 3D look, quality of JTG Contour in 3D look / On the back is a Velcro surface that is sewn to the patch. This means that the JTG patch can be easily attached to any Velcro surface. / Thanks to its compact size, the patch can be quickly and individually attached to surfaces such as baseball caps, backpacks, jackets, vests, helmets, etc. -
Patch of Jackets To Go for blood group B positive. Velcro rear. Size: 26 x 50 mm Weight: 4g -
JTG - Sleeve label - Austrian Armed Forces - Patch, olive drape full colour "Ready to patch", JTG - Sleeve badge - Austrian Armed Forces - Badge with Velcro back. Specially crafted high-quality and flexible rubber patch in 3D optics.- Contours in 3D optics
- At the back there is a hook Velcro area that is sewn to the patch so that the patch can be attached to any loop Velcro area.
- Especially for tactical vests, protective vests, uniform jackets, backpacks, tactical pockets and Velcro surfaces on the upper arm.
-
JTG - Sleeve label - Austrian Armed Forces - Patch, full colour "Ready to patch", JTG - Sleeve badge - Austrian Armed Forces - Badge with Velcro back. Specially crafted high-quality and flexible rubber patch in 3D optics.- Contours in 3D optics
- At the back there is a hook Velcro area that is sewn to the patch so that the patch can be attached to any loop Velcro area.
- Especially for tactical vests, protective vests, uniform jackets, backpacks, tactical pockets and Velcro surfaces on the upper arm.
-
I talk, I laugh, I laugh too, but be careful when I'm quiet. I talk, I laugh, I laugh too, but be careful, when I'm quiet is the pithy statement with the key phrase If I'm quiet, you have to be careful. This combined with a Half-Punisher logo, just a hammer patch, for any "silent" fighter or "silent" protector. Size: 88 x 62 mm Specially manufactured high-quality and flexible rubber patch in 3D look, quality of JTG Contour in 3D look / On the back is a Velcro surface that is sewn to the patch. This means that the JTG patch can be easily attached to any Velcro surface. Thanks to its compact size, the patch can be quickly and individually attached to surfaces such as baseball caps, backpacks, jackets, vests, helmets, etc. Translated with DeepL.com (free version) Length: 9 cm Width: 6.2 cm Height: 0.5 cm Weight: 0.02 kg -
- 1x Adaptive Rig System Split Rig setup with Tango modules
- 1x ARS butt pack
- 2x Grand GP
- 2x Double mag pouch
- 1x L4P x EURMED IFAK insert
-
IFAK edition of our big GP bag. Velcro on the front for an IFAK patch. Included TQ bag can be attached on both sides. Modular insert for attaching items on both sides with shock cord (supplied). 4 rows wide molle fastening. Inside lined with Velcro for different inserts. Since our L4P x EURMED IFAK Insert is made for self-help, the Large IFAK is intended for use as a buddy ifak. Also works as a general-purpose bag. No medications or TQ included. -
Not in stock - on order
Nalgene Bikini Pouch is designed for 1 liter / 32oz nalgene and water purifitaction tablets. The pouch has a detachable and stowable paracord strap and an elastic pocket for small items. Attachment to belt, molle or over the shoulder with paracord strap. The shoulder strap allows you to store nalgene next to your skin in winter to prevent frostbite. For extra protection against freezing, you can store the bottle upside down and run paracord into the pouch and shock cord from both sides (last photo). No nalgene bottle included. -
The PUZZLE is the most modular breast harness on the market. You can attach molle pouches together and customize the chest harness according to the mission needs. pouches can be attached on both sides. The included Adaptive Rig System Bravo module (yoke/harness) is highly adjustable and compatible with most aftermarket chest rigs, including our Adaptive Rig System and the PUZZLE series. This package contains all the parts needed for chest rig constructions from wide rigs to micro rigs and split front rigs. Just add pouches. 2024 Upgrade: Split Bar Tube Compatibility Popular add-ons for PUZZLE builds include Zipper modules and our Molle to Velcro Adapter which allows you to build placards and can be used to add dangler compatibility to a PUZZLE setup. -
Made of X-Pac - a high-quality light, durable, highly abrasion-resistant, tear-resistant, waterproof with aramid reinforced Cordura material. NIR compliant. DWR. Weight 313 g Ultra-light chest harness with fixed pocket. 4 double mag pouches for two each 5.56 or 7.62x39. Two large GP pockets and MBITR/nalgene pockets behind GP pockets. Upgrade your ULWCSIG with our Adaptive Rig System Bravo yoke, L4 x EURMED IFAK insert, TQ pocket and frag pockets. Content for illustrative purposes only, NOT included!
