-
Large, multifunctional waist bag suitable for various specialized activities and tasks. Versatile internal organization and numerous external attachment points. Quickly attaches to backpacks in a variety of ways, allowing you to use the Askare as part of a modular, scalable backpack system. "Askare" is Finnish for "task" or "chore", it's as simple as that. This backpack was originally designed for sniper teams to carry various shooter/spotter-related gear, but has proven to be a great asset for all kinds of tasks both inside and outside of military origins during development. The large seven-litre capacity plus numerous external mounting options make this a very versatile general-purpose bag. On the inside, the bag has a number of options for organizing your belongings: elastic webbing loops of different sizes, flat pockets, attachment loops, and a loop surface for attaching organizers with hooks. On the back wall, two rows of 50 mm elastic webbing are sewn, forming loops of different sizes. The bottom row is sewn in two large, approx. 17 cm wide loops (designed for .50 cal Barrett magazines). The top row is sewn in three smaller, approx. 12 cm wide loops (designed for HK417 magazines). Each end of the bag has an elastic loop for smaller items. The front wall has two flat compartments with attachment loops at the top. A loop area of 35 x 10 cm on the inside of the front makes it possible to attach all kinds of organizers with hooks, etc. A large, open compartment on the back of the backpack has a removable closed cell foam pad on the inside and allows you to store the waist belt if needed. This open compartment can also be used as a huge belt loop if you want to carry the Askare on a belt or the waist belt of a backpack. The PALS webbing on the sides allows you to attach small pockets and accessories to the outside of the backpack. The horizontal webbing on the front of the backpack can be used to attach small pouches such as our Multitool pouch, Tourniquet pouch and Zipped GP pouch 2x2, or elastic drawstring loops. The many loops on the sides of the backpack can be used to attach elastic cord to carry all kinds of items on the bottom and front of the bag, turnstiles, ponchos, tarps, whatever. WEARING OPTIONS Due to its large size, the Askare carries the best on your lower back, rotate it forward for easy access. The strap is also long enough to carry the bag on your back like a sling pack. The strap is attached to large triangular wings for stability. For longer backpack movements, you can quickly attach the Askare to the compression straps on the side of your backpack. To do this, you'll need to add suitable buckles (2M PALS mount or split-bar female buckles) or use G-hooks. No quick-release buckles are included with the bag. You can also quickly attach the Askare to the side of your backpack by threading the compression straps on the side of the backpack through the large belt loops on the front of the bag. The strap can be stored in the open compartment on the side of the bag when you carry it on your backpack. Lower your backpack, detach the Askare, take out the strap, put on the packed bag and you're ready to get to work. KEY FEATURES
- Capacity approx. 7 litres
- 40 mm SR belt (max. circumference approx. 145 cm) attached to stabilizing wings
- Flat open pocket on the body side for storing the belt
- Thin, closed-cell foam padding on the torso side for shape retention and comfort
- One large zippered compartment
- Two small flat internal compartments
- Numerous elastic loops for internal organization
- Two attachment points on the inside for dummy cords and carabiners
- 35 x 10 cm loop area on the inside for organizers with hooks
- 2 x 2 PALS weaving tapes on both sides
- Numerous 25 mm webbing loops for elastic cords and backpack attachment buckles
- 15 x 10 cm loop surface on the outside for patches and identification plates
- Water drainage at the bottom
- All color options offer good NIR performance
- 5-year material and product warranty
- Made in Finland/Estonia
- Weight: 445 g
- Dimensions: 35 x 20 x 9 cm (W x H x D)
- Main fabric: 500D Cordura (100% Polyamide)
- Strap: 100% polyester
-
Compact waist bag with versatile internal organization and external attachment points. Waist bags are already very versatile, but the Kukkaro is even more so thanks to the many ways you can customize it to suit your specific needs. On the inside, the bag has a number of options for organizing your belongings: elastic webbing loops of different sizes, flat pockets, tie-down loops and a loop surface for attaching organizers with hooks. The back wall has a large flat compartment for larger items. On top of the compartment is sewn a single row of 50 mm elastic webbing, which contains two smaller approx. 4 cm wide loops and a larger approx. 9 cm wide loop, suitable for small items such as multi-tools, lighters etc. The front wall has two small flat compartments with attachment loops at the top. An 18 x 10 cm loop area on the inside of the front makes it possible to attach all kinds of organisers with hooks, etc. A large, open flat pocket on the back of the backpack allows you to store the waist belt if needed and it can be used as a large belt loop if you want to carry the Kukkaro on a belt or the hip belt of a backpack. The PALS webbing on the side wings and bottom allows you to attach small pockets, elastic cords and accessories. The straps on the side wings can also be used to quickly attach the backpack to the compression straps on the side of a backpack using additional SR buckles or G-hooks. Such buckles or G-hooks are not included with the backpack. Learn Finnish with Savotta: "Kukkaro" is Finnish for a bag or pouch that is a type of handbag, but not a handbag, nor just any small bag. The free Finnish online dictionary www.sanakirja.org defines "kukkaro" as "a small, usually leather pouch or bag, in which one carries small necessities and accessories, such as money, tobacco, etc. By definition, such a small fanny pack is really the ultimate "kukkaro". KEY FEATURES
- Capacity approx. 1.5 litres
- 25 mm SR buckle strap (max. circumference approx. 145 cm) attached to stabilizing wingsFlat open pocket on the body side for storing the belt
- Large main compartment with zipper
- One large and two small flat inner compartments
- One large and two small elastic loops for organization on the inside
- Two attachment points on the inside for dummy cords and carabiners
- 18 x 10 cm loop area on the inside for organizers with hooks
- 1 x 2 PALS weaving straps on both side wings
- 1 x 3 PALS weaving tapes at the bottom
- 15 x 5 cm loop surface on the outside for patches and identifiers
- Water drain grommets at the bottom
- All color options offer good NIR performance
- 5-year material and product warranty
- Made in Finland/Estonia
- Weight: 215 g
- Dimensions: 20 x 12 x 5 cm (W x H x D)
- Main fabric: 500D Cordura (100% Polyamide)
- Strap: 100% polyester
-
This kit includes everything you need to make all kinds of elastic cord things like zigzag attachment things for backpacks etc. KEY FEATURES
- 400 cm elastic cord
- 4 strong drawstring closures
- Think, cut, burn, baste, and you're done
- 2-year material and product warranty
- Made in Finland/Estonia
- Weight: 45 g
- Dimensions: 11 x 15 x 2 cm (W x L x D) (in packaging)
- Elastic cord: polyester/rubber
- Drawstring closures: polyamide
- An elastic zigzag or similar attachment thing on the outside of a backpack.
- And probably a lot of other things.
- Most people will probably use these for all kinds of attachment things. The included 400cm cord and four drawstring closures should be enough for a pair or even four of these things, depending on the size and design of the thingy.
-
While natural foliage is the ultimate helmet camouflage, a bushy cover with a 3D effect might be the next best thing. Quick and easy to use, easy to customize. They effectively break up helmet silhouettes and provide quick camouflage adjustment to suit different environments. The design is very simple, a single flat piece of 500D Cordura with alternating zigzag shapes cut into it. The zigzag pattern is positioned in such a way that it creates an opening for NVG mounts on the front. Small slits have been cut around the edges for the elastic cord. Thread the elastic cord through the slits, tie it at the back, and pull it over your helmet like a shower cap. Finish it off by pulling back any excess material and rolling it underneath yourself to tighten the cover. If you want to adjust the fit, you can play around with threading the elastic cord through the slits and zigzag pattern in different ways. And if you get really wild and feel the need: you can even cut off excess material from the cover, but of course, such huge adjustments are at your own risk. KEY FEATURES
- 3D Effect Camouflage Plate for Helmets
- One-size-fits-most, best suited for high-cut L and XL helmets
- Lightweight Laser Cut 500D Cordura
- Quick and easy to apply and remove
- All color options offer good NIR performance
- 2-year material and product warranty
- Gemaakt in Finland
- Weight (in retail container): 65 g
- Dimensions (in retail packaging): 10 x 15 x 4 cm (W x L x D)
- Fabric: 500D Cordura (100% polyamide)
-
This simple kit allows you to create different markers by combining the different patches or using them as is. The kit includes two 25 x 25 mm squares, two 20 x 50 mm lines and a 50 x 50 mm square. This allows you to make a number of different combinations, or just highlight a lot of different things with separate patches. They are made of fairly high-quality photoluminescent material, the same material that we have been using for decades in various military applications. This stuff is quite effective and lasts a very long time. We examined 10+ year old material we had in stock and it performed with around 90% the same efficiency as its brand new counterpart. Since the material itself has a very long lifespan, we decided not to rely solely on lamination/gluing to hold the photoluminescent material to the hook band. These are therefore also sewn for the longest possible lifespan. This significantly increases the cost of production, but now we can be sure that these will not delaminate after a few winter/summer use cycles. KEY FEATURES
- Bracket-attached glow-in-the-dark patches
- Kit includes two lines, one large and two small squares
- High quality and high performance photoluminescent material
- Not only laminated, but also sewn to prevent delamination
- 2-year material and product warranty
- Gemaakt in Finland
- Weight: 6 g
- Material: Photoluminescent material (phosphor-free, non-radioactive, non-toxic)
- Brightness, mCd/m2: 150/22 (10/60 min after light failure)
- Expiry time: about 35 hours
-
The Savotta Utility Pouch Mini can be attached to backpacks, tactical belts and the like using the Pals/Molle loops. It offers you space for the little things of everyday life or for a smartphone, compass, weapon cleaning kit, spare batteries or a first aid kit. The bag can be opened quickly and easily with the zipper. - Made in Finland - NSN 8465-58-000-3652 - Universal bag -Zipper - Drainage eye at the bottom - PALS / Molle loops Material: - Backpack: 100% Polyamide, Cordura 1000 den - Webbing: 100% Polyester - Dimensions: 12 x 10 x 6 cm
-
A medium-sized pouch for general use. KEY FEATURES
- Designed for general use
- Two-way zipper
- Internal divider and loops for organization
- PALS weaving tapes on the outside
- Drainage feed-through at the bottom
- PALS-compatible mounting system
- 5-year material and product warranty
- Made in Finland/Estonia
-
At first glance, the Hatka 12L may seem like just a roller bag with shoulder straps, but when you look closer, you'll see that there's actually a lot going on. This design was conceived as part of a special military carrying system, which required a small daypack that could be easily attached to a larger backpack. On the outside are four rows of PALS weaving tapes. These can be used for attaching pouches, bungee cords, and buckles to quickly attach or detach the Hatka to a larger backpack. The four webbing loops at the bottom can be used for elastic cords, so you can carry items under the backpack. Two long internal compartments are there to organize smaller items, and the D-ring provides a point to store small valuables. The large external pocket against your back is large enough for a hydration reservoir or tarp. The simple 25mm webbing shoulder straps are attached to D-rings and completely removable, and therefore also replaceable with padded shoulder straps if you wish. These can also be set as a single diagonal shoulder strap. They are designed to be lightweight, easy to carry and store so you can attach the Hatka to larger packs. KEY FEATURES
- Capacity approx. 12 litres
- Quick and secure roll-top closure with SR buckle
- Simple, detachable 25mm low-profile shoulder straps
- PALS webbing on the outside
- Loop for identification and patches on the outside
- Four loops at the bottom
- One large external back compartment
- Two long internal compartments
- D-ring attachment point on the inside
- All color options offer good NIR performance
- 5-year material and product warranty
- Made in Finland/Estonia/Poland
- Weight: 480 g
- Dimensions: 25 x 40 x 15 cm (W x L x D)
- Main material: 500D Cordura (100% polyamide)
- Strap: 100% polyester
-
A versatile helmet cover with the right camouflage attachment cords throughout. Designed around the geometry of the Ops Core FAST XP high cut helmet shell, but also fits many other high cut helmets. The world is full of covers for high-cut helmets, but since 99% of these covers don't offer a real way to properly camouflage the helmet with foliage etc., we decided to unleash our offer on those as well. Made of 500D Cordura instead of regular garment fabric for high abrasion resistance. Unlike most high-cut helmet covers, which only have that zigzag cord at the top, our cover has elastic cord attachment points around the helmet shell. This allows you to camouflage your helmet well with foliage and the like. Because the elastic cord is not sewn to the cover, you can choose not to use it at all or to adjust or replace it as needed. The back of the case features a piece of 25mm webbing, with bartacked mounting points for IR strobes and the like. Then we have the standard loops on the sides, top and back for identifiers, patches, cameras, pockets for counterweight etc. The cover is attached via six pieces of one-wrap to pieces of hook on the inside of the helmet shell. If your specific helmet doesn't have pieces of hook exactly where it needs to: that's why we supply a piece of self-adhesive hook of 50 x 150 mm with every cover! Cut and paste it wherever you need it. KEY FEATURES
- Designed for Ops-Core FAST XP scale geometry
- Also fits many other high-cut helmets
- Abrasion resistant 500D Cordura
- Elastic cord for foliage and all-round cable routing
- 25mm webbing on the back for IR flashes etc.
- 50mm loop on the sides and top
- 100 x 100 mm loop on the back
- One-Wrap attachment in the helmet shell
- Comes with a 50 x 100 mm piece of self-adhesive hook
- All color options offer good NIR performance
- 5-year material and manufacturer's warranty
- Gemaakt in Finland
- Weight: L: 100 g, XL: 105 g
- Fabric: 500D Cordura (100% polyamide)
- Strap: 100% polyester
- Ops-Core FAST SF (super high cut): fits pretty nicely after some tweaking
- UaRms TOR-D (slightly thicker helmet shell than Ops-Core): fits very well
- Galvion Caiman ballistic (very different shape): fits quite well after some adjustments
- PGD ARCH (old generation, Ops-Core XP shell geometry): fits very nicely
- PGD ARCH/MICH (current (2023) gen): Fits, but NVD bungees and rear rail screws end up under the cover*.
-
Magazine holder for two AR15 magazines of 30 cartridges. Tuck tab and Velcro lid closure, PALS and strap compatible fastener. KEY FEATURES
- Suitable for two AR15 30 rd magazines
- Protective lid with pleated tab and hook-and-loop closure
- Built-in hook-and-loop "silencer" in the lid
- Circumference and retention adjustable via elastic cord
- Reinforced bottom
- Attachment system compatible with PALS and belt
- Water drainage transit at the bottom
- All color options offer good NIR performance
- 5-year material and product warranty
- Made in Finland/Estonia
- Weight: 100 g
- Dimensions: 8 x 19 x 5 cm (W x L x D)
- Main fabric: 1000D Cordura (100% Polyamide)
- Strap: 100% polyester
- AR15 30 rd PMAG without Ranger Plate, 2 Pack
- AR10 20 rd magazine, 1 pcs
- HK417 20 rd magazine, 1 pcs
- IFAK insert
- Flashbang / smoke grenade
- Radio
-
Magazine pouch for two regular AK/RK 30 round magazines. Tuck tab and Velcro closure, PALS and strap-compatible attachment system. KEY FEATURES
- Suitable for two AK/RK 30rd magazines
- Protective lid with insert tab and Velcro closure
- Built-in Velcro "damper" in the lid
- Circumference and retention adjustable via elastic cord
- Reinforced bottom
- PALS and belt-compatible attachment system
- Water drainage tulip at the bottom
- All color options offer good NIR performance
- NSN: 1005-58-001-8494
- 5-year material and manufacturing warranty
- Made in Finland/Estonia
- Weight: 115 grams
- Dimensions: 8 x 23 x 5 cm (W x L x D)
- Main fabric: 1000D Cordura (100% Polyamide)
- Band: 100% polyester
- RK 30e plastic magazine, 2 pcs
- AK-47 30e steel magazine, 2 pieces
- AK-74 30th magazine, 2 pieces
- AR15 30e PMAG with Ranger Plate, Pack of 2
- IFAK insert
- 0.5 litre bottle
- Radio
-
A compact counterweight bag, attaches with Velcro and via webbing loops to screws/rails. Designed for 45 x 60 x 5 mm Finnish Senop lead weight discs. KEY FEATURES
- Designed to fit up to six 45 x 60 x 5 mm weight plates
- Two compartments for weight discs
- One large compartment for random items
- Attaches with Velcro and girth loops with screw adapters
- External elastic loops for cord management etc
- Also functions as a holder for spectacle straps
- 5 x 15 cm loop on the outside for patches
- All color options offer good NIR performance
- 5-year material and product warranty
- Gemaakt in Finland
- Weight: 50 g
- Fabric: 500D Cordura (100% polyamide)
- Strap: 100% polyester
- Buckles: steel
-
A larger counterweight bag for Finnish Senop lead weights and 10 x 10 cm identification plates. Designed to work with the usual Ops Core FAST XP high cut helmet and our High cut helmet cover V1. KEY FEATURES
- Internal elastic compartments for lead weights
- Designed for six weight discs of 45 x 60 x 5 mm
- Can also carry weights of other shapes and sizes
- Attaches to helmet rail with screws and loop
- Upper fastening straps for our High cut helmet cover V1
- External elastic loops for cord management etc.
- Also functions as a holder for spectacle straps
- 10 x 12 cm loop on the outside for patches
- All color options offer good NIR performance (read more)
- 5-year material and product warranty
- Gemaakt in Finland
- Weight: 60 g
- Fabric: 500D Cordura (100% polyamide)
- Webbing: 100% polyester
- Buckles: steel
-
Add effective camouflage to your gear with these serrated laser-cut camouflage strips. Quick and easy to apply, remove and reuse. KEY FEATURES
- 3D effect camouflage for gear
- Kit contains five approx. 145 cm long scrim strips
- Lightweight Laser Cut 500D Cordura
- Easy to apply, remove and reuse
- All color options offer good NIR performance
- 2-year material and product warranty
- Gemaakt in Finland
- Weight (in retail box): 110 g
- Fabric: 500D Cordura (100% polyamide)
-
Fits the most common tourniquets from SOFTT-W to CAT Gen 7. Vertical PALS and strap and horizontal strap attachment options. KEY FEATURES
- Fits most tourniquets, including SOF, CAT Gen 7, SAM-XT
- Flap with Velcro closure
- Elastic compartment for slimmer and thicker tourniquets
- Elastic pen/glow stick loops on the sides
- Attachment system compatible with PALS and belt
- One-Wrap for horizontal belt attachment
- All color options offer good NIR performance (read more)
- NSN: 6510-58-001-8496
- 5-year material and product warranty
- Made in Finland/Estonia
- Weight: 65 g
- Dimensions: 5 x 15 x 4 cm (W x L x D)
- Strap: 100% polyester
-
Clean, simple dump bag for empty magazines and other clutter. Attachment system compatible with PALS and strap. Main features:
- Suitable for 4-5 rifle magazines
- Top edge bound with webbing to maintain shape
- Inner collar with adjustable elastic cord
- Folds into a very compact bundle
- SR buckle for attachment when folded
- Attachment system compatible with PALS and belt
- Water drainage at the bottom
- All color options offer good NIR performance (read more)
- NSN: 1005-58-001-8495
- 5-year material and product warranty
- Made in Finland/Estonia
- Weight: 150 g
- Dimensions: 13 x 30 x 13 cm (W x L x D)
- Main fabric: 500D Cordura (100% Polyamide)
- Strap: 100% polyester