-
Not in stock - on order
No stock item. It is made to order and normally has a delivery time of 16 weeks. If you order 50 or more, the price drops, but the delivery time increases to about six months. Pieces can also be obtained separately. -
Not in stock - on order
An overjack designed for the operator with an emphasis on camouflage and camouflage. The use of this jacket will significantly reduce your visual and thermal signature Very good visual camouflage Limited thermal radiation camouflage (NIR) Front closed with push buttons Flame retardant A ghillie jacket designed for the operator to be used outside the normal jacket or in hot weather outside a shirt can be worn outside the vest of the equipment Material Flame retardant polyester mesh Beware: Outside the equipment vest -
Sale!
The A404 STEALTH jacket is a lightweight, compressible waterproof jacket made with Pertex® Shield 3-layer laminate. The A404 STEALTH jacket has been designed with the help of special forces around the world and is a three-layer exterior. The fabric is quiet and supple with impeccable performance in terms of breathability, waterproofing and windproofing. The design and fit are designed with the driver in mind, with the two large front pockets with two-way zippers for great flexibility. Internal slots make it easy to store mobile or communication equipment. The jacket has discreet adjustment points at the hood and waist for maximum comfort without restricting the user's movements. These adjustment points allow the large hood to be fine-tuned to cover the driver's head without obstructing peripheral vision. Breathability is further enhanced by two waterproof ventilation zippers under the arms, allowing operators to dissipate their heat while on the move, while remaining comfortable and focused. Features- Waterproof outer layer
- Windproof, waterproof and breathable
- Hidden adjustment points
- Arm pockets with hook-and-loop panels for unit/identification patches
- Large hood with fully adjustable visor
- YKK® aquaguard zippers under each arm for ventilation
- Large front pockets with internal phone pocket
- YKK® aquaguard zippers
- 3-layer Pertex® Shield laminate
- 20,000 mm HH (waterproofing) and 20,000 g/m² (breathable)
- Range: Arktis® Elite
- Color: black (BK)
-
Not in stock - on order
The Delta OL jacket protects you from all types of harmful cold during your activities in cold environments, provides you with the necessary stamina and - most importantly - the comfort so you can fully concentrate on your tasks. The Delta OL 3.0 jacket is windproof and water repellent thanks to the top material. This means that the two-layer ripstop laminate stops icy wind and also protects you from heavy snowand light drizzle. As with the fur of a polar bear, the thermal insulation of the Delta OL 3.0 jacket is based on a hollow fiber. This guarantees you excellent warmth in cold weather. The extraordinary thermal insulation of G-Loft creates a three-dimensional structure of the various hollow fiber polyester fibers, which can hold maximum dry air. This creates a warming, thermally insulated layer between you and the cold environment. And the fibers retain their structure, even when they are wet. Because of the so-called "memory effect" they always return to their original form - even after multiple washes and intensive use. Areas that are more sensitive to wear - such as the elbows and lower back - are extra reinforced with 500 Denier Cordura ® material. If you need to focus on your work, comfortable clothing is the most important thing - especially if you're operating outside and wearing full gear. Thanks to its anatomical cut, the Delta OL 3.0 jacket gives you full freedom of movement and stays tight enough to use additional equipment such as plate carriers or chest rigs. To keep your core warm and provide your extra mobility in the arm zone, the jacket has two degrees of protection from the cold. The hull section is lined with a G-Loft padding of 145 g / m², the sleeves with 110 g / m². The jacket has a total of eight pockets. This means you can keep most of the stuff you need at your fingertips. Smaller equipment can be stowed in one of the four sleeve pockets. For larger items, you can use one of the large front pockets or the two inner pockets. Details:- Upper and forearm pockets.
- Velcro on the upper arms for tactical badges.
- Water-repellent YKK® zippers.
- Side vents.
- 2 inner pockets.
- Wrist warmers.
- Adjustable cuffs.
- Detachable hood.
- Windproof, water repellent and breathable top material.
- G-Loft insulation filling.
- Cordura® reinforcements in the area of the elbows and lower back.
- Weight: approx. 1100 g (size L).
-
Not in stock - on order
Features:- This plate carrier sits very comfortable and tight on your body.
- Adjust it to your size, put on and pull the 4 strings to make it sit tight.
- Compartments for ceramic plates on the front, sides and back
- MOLLE webbing on the front and sides
- 9 tight pouches with elastic loop holder for all different 5,56 or 7,62 mm magazines or radios. Even your pistol with a lamp can be carried in them.
- Small compartments for cleaning kits, cyalumes etc. on the inside of the strap on.
- Padded shoulders with cable channels and elastic loops for antennas
-
Not in stock - on order
3M Peltor Tactical XP hearing protection
The 3M Peltor Tactical XP is an electronic, level-dependent hearing protection with a large number of setting options. Model TACXPF has a folding headband and a damping value of SNR = 31 dB. The Tactical XP headset combines comfort and safety with superior technology. For example, an innovative digital circuit enables individual adaptation of hearing protection to the relevant working environment, because, for example, the volume of the level-dependent function can be controlled. In addition, the headset has an equalizer, a balance control, an adjustable release time and a volume control for external input signals. A voice is particularly useful that easily guides the user through the menu. The extremely cushioning ear cups with soft, non-slip sealing rings ensure an optimal fit and high comfort. The padded, wide headband made of high-quality stainless steel makes the Tactical XP very comfortable even with prolonged use. The application areas of the 3M Peltor Tactical XP are everywhere where protection against harmful noise and at the same time communication is required, for example in industrial production, in construction and in the oil and gas industry. We order this product for you. Delivery time + - 2 weeks. -
Sale!
The Arktis B474 VULCAN jacket is an insulating, lightweight and easy to carry mid-layer with PrimaLoft® Gold insulation. It has a windproof and water-repellent Nylon MiniRip exterior. It offers exceptional thermal efficiency and breathability without being bulky, even when wet. The B474 VULCAN is part of the new Arktis Elite series and is the most advanced thermal garment. Between the windproof inner and outer layer, the jacket is filled with 100g of Primaloft® Gold on the body and 60g on the arms, which means excellent thermal properties without unwanted bulk. The design and fit are designed with the user in mind. The two large front pockets have two-way zippers for flexibility, and internal slots make it easy to store mobile phones or communication devices. The two front pockets have discreet internal adjustment points for ease of use without sacrificing armor. The spacious hood can be fully adjusted at three points and has a wired edge to effectively adjust the hood and prevent loss of peripheral vision. The jacket can be stored in its own pocket. Features- Down jacket
- Windproof double layer system
- Hidden adjustment points
- Internal storage with zipped pocket
- Arm pockets with hook-and-loop panels for unit/ID patches
- Large front pockets with internal phone pocket
- Large, fully adjustable hood
- Elasticated cuffs
- YKK Zippers
- MiniRip nylon exterior
- Water-repellent DWR finish
- PrimaLoft® Gold insulation
- Range: Arktis® Elite
- Color: Genuine MultiCam® Camouflage
-
5.11 Tactical has redesigned the tried and tested and popular 3-in-1 Parka ™ to achieve even better performance. The top material of the 3-in-1 parka 2.0 is made of mechanical stretch material, which offers enhanced flexibility and makes it 13% lighter. In addition, the 3-in-1 parka 2.0 is equipped with an improved waterproof and breathable material with DWR (sustainable water repellent) treatment and provides resistance to blood-borne pathogens*. The six-pocketed outer jacket features microphone loops, a camera loop kit, a hood that can be rolled into the collar or removed and stowed in the back pocket, hidden multifunction pockets and pull-out ID panels for easy identification. The Quixip®-locking system on the sides provides quick access to firearms and improved ventilation. The warm and breathable fleece lining with its five pockets can be used as a stand-alone tactical fleece jacket. Material Outer layer: 100% polyester; Inner lining: 100% nylon; Outer material fleece jacket: 100% polyester; Lining fleece jacket: 100% polyester; YKK® zippers; PRYM® buttons Top jacket details:- Breathable membrane and fully taped seams.
- Robust stretch top material.
- 2-way zipper in front with chin protection and wind flap.
- Detachable hood that can be stowed in the collar with a cover and volume control at the front and back for freedom of movement and visibility.
- Partially elastic cuffs adjustable with Velcro.
- Quixip®-locking system on the sides provides quick access to firearms and improved ventilation.
- Extended back section.
- 2 spacious ReadyPocket ™ velcro breast pockets.
- 2 spacious, fleece-lined zipper pockets.
- 1 pocket with Velcro.
- 1 zippered inner pocket.
- 2 microphone loops.
- 2 hidden, removable ID panels (chest, 12.5 x 12.5 cm).
- 1 hidden, removable ID panel (back, 30.5 x 21 cm).
- Upright collar.
- Reinforced shoulder and forearm areas.
- Elastic cuffs.
- 2 ReadyPocket ™ velcro breast pockets.
- 2 zippered pockets.
- 1 zippered inner pocket.
- 2 microphone loops.
- Lateral Quixip® locking system provides quick access to firearms.
- Water column: 10,000 mm.
- Breathability: 10,000 g/ m² / 24h.
- Weight: approx. 870 g (size L).
-
Not in stock - on order
The ultimate tactical shoe for the Special Forces, the Shadow Amphibian has been designed in collaboration with the Navy Seals to provide units with a versatile tactical shoe for use in the air, on land and at sea, including swimming. These shoes have a passive drainage system that is not designed to prevent the ingress of water, but to allow water to flow in and out of the shoe as needed. They are very comfortable and dry quickly. Recommended for work in wet environments where the user works around the water or in the water and on land. Features- Multifunctional intervention shoe
- Recommended for amphibious surgeries
- Two-way water drainage system
- KPU mesh to filter and prevent dirt from entering the shoe, while still breathing well
- Toe profile adapted to hold fins in place
- Slot for fin lock or IR Glint strap
- Reinforced toe for less fin wear
- Metal pins (non-magnetic) on the inside of the sole to control the smooth rope
- Pocket for storing and hiding laces
- Breathable, antimicrobial and water-repellent lining
- Non-slip rubber sole with injection molded grip
- Articulated heel and outsole shape for stealthy, silent foot unrolling
- Perforation-resistant composite plate with rotation for protection and reduced fatigue
- Multi-density EVA midsole designed to cushion foot impact and promote launch
- Lightweight, seamless construction for foot protection
- Nylon rip-stop liners
- Flexion footprint for Achilles heel
- Full grain leather upper and TEK-DRY™ lining.
- Average elevation
- Weight (43/9,5us): 555 g
- US size
- Color; Coyote
-
The ultimate tactical shoe for the Special Forces, the Shadow Amphibian has been designed in collaboration with the Navy Seals to provide units with a versatile tactical shoe for use in the air, on land and at sea, including swimming. These shoes have a passive drainage system that is not designed to prevent the ingress of water, but to allow water to flow in and out of the shoe as needed. They are very comfortable and dry quickly. Recommended for work in wet environments where the user works around the water or in the water and on land. Features- Multifunctional intervention shoe
- Recommended for amphibious surgeries
- Two-way water drainage system
- KPU mesh to filter and prevent dirt from entering the shoe, while still breathing well
- Toe profile adapted to hold fins in place
- Slot for fin lock or IR Glint strap
- Reinforced toe for less fin wear
- Metal pins (non-magnetic) on the inside of the sole to control the smooth rope
- Pocket for storing and hiding laces
- Breathable, antimicrobial and water-repellent lining
- Non-slip rubber sole with injection molded grip
- Articulated heel and outsole shape for stealthy, silent foot unrolling
- Perforation-resistant composite plate with rotation for protection and reduced fatigue
- Multi-density EVA midsole designed to cushion foot impact and promote launch
- Lightweight, seamless construction for foot protection
- Nylon rip-stop liners
- Flexion footprint for Achilles heel
- Full grain leather upper and TEK-DRY™ lining.
- Average elevation
- Weight (43/9,5us): 555 g
- US size
- Color; Black Ops (BKO)
-
Version 3.0 The K19 is the ultimate modern plate carrier. Designed, tested and proven in battle in Israel and behind enemy lines with some of the IDF's most elite units. The K19 has many subtle but revolutionary features that no other plate carrier has. When it comes to the belly band, we have thought of everything. Many modern plate carriers now use quick release mechanisms, but they always come at the expense of not being able to easily adjust the fit. The K19 uses our Egress™ Quick-release system and patented Fast-Adjust™ Cummerbund that can be adjusted and refined by the wearer in real time. Getting the perfect fit can depend on your specific mission gear, what you're wearing underneath (which can change halfway through the mission), or even how much you ate for lunch. We know that the ability to customize it yourself, on-the-fly, is critical to avoid unnecessary fatigue and impaired combat awareness. The K19 has a one-size-fits-all belly band and multi-size plate bag, eliminating the need to make complicated and risky size choices when buying. You know it will always suit you or members of your team, regardless of your gear or mission set. This is also important for procurement professionals who can be sure that it is a good fit for all their boys (or girls). The quick-adjustable belly strap also has a built-in stretch element that allows the vest to be pulled nice and tight so it doesn't bounce when you run, but that gives you that inch or so of stretch needed when you fall on a knee so the wearer doesn't flatten their torso. The latest version of the K19 is also compatible with placard, with both upper attachment points and a new laser-cut loop overlay. This new layer gives you the best of all worlds. It allows you to either directly add velcro placards, or use the mil spec, bartacked molle underneath to attach ordinary molle bags. Unlike other carriers, the quick-release fasteners in the shoulder area are placed far back so they don't interfere with your rifle stock and are still easily accessible. When it comes to comfort, the K19 shares many of the comfort features of the battle-proven Agilite K5, which is considered the most comfortable plate carrier on the market. Such comfort features include a generous melting foam shoulder pad for extreme comfort even with prolonged use. Anyone who has spent time in the military knows that even the shortest missions can culminate in multiple day operations. Comfort is not a luxury, it is a necessity to stay alert and not be distracted in hostile environments where complacency can cost you your life. One of the secrets of the K19's comfort level is that the shoulder straps create a patented "V" shape for the mass that distributes the weight over the maximum surface and relieves the pressure points. The back of the K19 plate bags has a triple layer of low-profile fusion foam to stay comfortable even when using the K19 with hardened steel or ceramic armor plates. Steel or ceramic plates often have hard corners and edges that can dig into your hull when using regular plate carriers, but the K19 has inherent padding to prevent this. The K19 is also compatible with the Agilite K-series, which means it has the ability to attach the AMAP III Assault package directly to it within seconds. No getting MOLLE, no hassle. At the back, the belly strap has numerous attachment points for the mil-spec G hooks, allowing a perfect fit for everyone, from the largest to the smallest person, without making the plate carrier unnecessarily large or prohibitively small. The K19 has grown from the front lines of the Israeli Special Forces to one of the best-selling plate carriers in the US. It has traveled many miles and crossed borders to some of the most dangerous places in the world to bring you one of the most detailed and thoughtful plate carriers on earth. Details- Integrated Egress™ Quick-release system
- Patented one-size-fits-all Fast-Adjust™ Cumberband that can be adjusted by the wearer in real time.
- Shoulder exit buckle are positioned backwards so that they do not interfere with the placement of the rifle stock
- One-size plate bag with internal controller to fit perfectly on all common board sizes (SAPI S, M or L-see size chart for exact details).
- One-Size-fits-all belly band-no risks or size decisions to be made during purchase-fit for very small-very large people.
- Suitable for plates
- Administration pocket with zipper at the front
- Fusion foam shoulder pad for long-term comfort
- Patented "V" design distributes the weight over the maximum surface area of the shoulders to the center of the mass to avoid pressure points.
- Rear tow lever
- Skeletal shoulders for communication and drinking tubes
- Laser-cut Velcro panels front and rear
- Agilite K Series™ compatible
- Designed, tested and proven in battle in Israel
- 1000D CORDURA® Mil Spec Tactical Nylon
- Mil Spec polymer buckles and hardware
- Egress™ Quick-release system and patented Fast-Adjust™ Cumberband.
- Laser cut Velcro MOLLE overlay panels
- Fits any size S, M or L SAPI/ESAPI plates up to 1.5 inches thick
- Fits all 10" X12" plates
- Dimensions chest panel with Velcro: 25cm*9cm (9.8" x 3.5")
- Laser Engraved Mil Spec Polymer Cord Pullers
- Weight: 2.5 lbs (1.1 kg) including Fast-Adjust Cummerbund™
-
Sale!
The Arktis B474 VULCAN jacket is an insulating, lightweight and easy to carry mid-layer with PrimaLoft® Gold insulation. It has a windproof and water-repellent Nylon MiniRip exterior. It offers exceptional thermal efficiency and breathability without being bulky, even when wet. The B474 VULCAN is part of the new Arktis Elite series and is the most advanced thermal garment. Between the windproof inner and outer layer, the jacket is filled with 100g of Primaloft® Gold on the body and 60g on the arms, which means excellent thermal properties without unwanted bulk. The design and fit are designed with the user in mind. The two large front pockets have two-way zippers for flexibility, and internal slots make it easy to store mobile phones or communication devices. The two front pockets have discreet internal adjustment points for ease of use without sacrificing armor. The spacious hood can be fully adjusted at three points and has a wired edge to effectively adjust the hood and prevent loss of peripheral vision. The jacket can be stored in its own pocket. Features- Down jacket
- Windproof double layer system
- Hidden adjustment points
- Internal storage with zipped pocket
- Arm pockets with hook-and-loop panels for unit/ID patches
- Large front pockets with internal phone pocket
- Large, fully adjustable hood
- Elasticated cuffs
- YKK Zippers
- MiniRip nylon exterior
- Water-repellent DWR finish
- PrimaLoft® Gold insulation
- Range: Arktis® Elite
- Color: Black
-
Not in stock - on order
Melierax Hardshell has been designed as a lightweight jacket for best possible protection against storms, rain and snow. The reduced infrared signature (NIR) makes this jacket applicable for special operations use. Material selection was focused on rugged, light weight performance materials with little pack size. The Pattern has been constructed for high mobility, to harmonise with body contours and to be worn over body armor. Durable nylon woven 3-layer fabric with rip stop structure features durable water repellent (DWR) coating, a wind blocking membrane with high waterproofness and breathability for optimal moisture management and a comfortable backer on the inner side. Fully seam sealed interior prevent intrusion of water and guarantee best possible protection during operations in demanding environments. All on the outer shell located zips are waterproof. The hood is fully adjustable and helmet compatible. Both sleeves feature a sleeve pocket and hook & loop mounting surface. Large front pockets allow easy access even when wearing chest rigs or backpacks. The Melierax also features pit zippers for easy venting and temperature regulation. - Durable nylon woven 3-layer fabric with reduced infrared signature (NIR) and durable water repellent coating - Waterproof memrane (10'000mm hydrostatic head) with excellent breathability (MVP 10'000g/m2/d) - Fully seam sealed interior for best possible weather protection - Pocket and hook & loop patches on both sleeves - Fully adjustable helmet compatible hood - Modern cut for great ease of movement - Adjustable sleeve ends - Roomy two way front pockets with good accessibility - Pit zippers for easy venting - Two-way front zip - Waterproof zippers on outer shell - Shock cord hem with concealed adjustment system -
A modular tactical combat vest that was originally developed and is currently used by the Finnish armed forces. Enough MOLLE fastening loops to carry some weight and the user an individual and functional placement of the bags, holsters, etc. Internal card pockets at the front for documents and a drinking compartment at the back. Available in two sizes and adjustable to wear over or without body armor. Perfect for members of the government, hunters and anyone who is just looking for a functional vest for outside. MAIN FEATURES:- MOLLE compatible lusystem
- Front opening, side adjustable
- Two internal card pockets at the front
- Internal hydration bag at the back
- Non-slip material on the shoulders
- Velcro on the shoulder for antennae or drinking hoses
- Glow-in-the-dark identification on the back
- Belt tabs on the inside
- Built-in handle for Medic &Rescue
- 5-year warranty on material and craftsmanship
- Sizes: S / M and L / XL
- Weight: 1.00 kg
- Main material: 1000D Cordura
-
Not in stock - on order
The K5 Plate Carrier is the most comfortable Plate Carrier on the market. Lightweight, durable and proven by SOF around the world, the K5 doesn't skimp on shoulder or bottom plate padding like many plate carriers, so it stays comfortable during prolonged use. We know that missions or training exercises are rarely "fast and dirty", which is why comfort throughout the days and nights in your board carrier is crucial. The K5 comes standard with the Agilite Stretch tummy strap so your vest can be pulled nice and tight so it doesn't bounce while running, but the stretch element gives you the inches or so you need when you fall on your knee. the carrier does not crush your torso. The K5 design is unique in that the shoulder straps create a conciliatory "V" shape relative to the mass, dividing the weight over the maximum surface and illuminating pressure points. The K5 has a number of subtle but crucial features that make it better than other providers, including the ability to connect the AMAP II or AMAP 30 Assault packs directly to it in seconds. No getting MOLLE, no hassle. • Now with wider velcro pattern • Own "V" design distributes the weight over the maximum surface from the shoulders to the mid-mass area to avoid pressure points. • Includes stretchy abdominal strap • Zippered administrator bag • Fusion foam shoulder padding for comfort during prolonged use • Drag handle at the back • Skeletal shoulders for communication and hydration hoses • Laser-cut Velcro panels front and rear • Compatible with Agilite K Series ™ • 1000D Mil Spec tactical nylon • Mil Spec polymer buckles and hardware • Laser-cut Velcro MOLLE overlay panels • Fits on SAPI /ESAPI plates up to 1" thick • Opt for 10 "X12" plate size Large • Made in Israel • Weight: 2.2 lbs (1 kg) including elastic abdominal band This plate carrier was replaced by the improved Agilite K19 plate carrier: https://shop.afullmetaljacket.com/product/agilite-k19-plate-carrier/ -
Not in stock - on order
FDF EQUIPMENT VEST
A modular carrier that was originally designed for and currently used by the Finnish Armed Forces. Enough PALS bands to carry a full combat load and enable the user's personal functional pouch placement. Internal card pockets at the front for documents and a drinking compartment at the back. Available in two sizes and adjustable to wear over or without body armor. KEY FEATURES- PALS-compatible fastening strap
- Front opening, side adjustable
- Two internal card pockets at the front
- Internal hydration bag at the back
- Friction material on the shoulders
- Velcro closure on the shoulder for antennas or drinking tubes
- Glow-in-the-dark identification on the back
- Belt tabs on the inside
- Built-in handle
- 2-year warranty on material and craftsmanship
- Finnish Key Flag product
-
Not in stock - on order
The UF PRO Delta AcE Plus Gen.2.5 is the most optimal tactical jacket for extreme physical activities in icy temperatures. The top material protects against snow, wind, cold and other elements thanks to a windproof and highly water-repellent outer shell. The sleeves of the Delta AcE Plus Gen.2.5 jacket are lined with a special blend of 37.5 ™ merino wool to improve the evaporation of bodily fluids, keeping the body dry longer so you can focus on the essentials. The arms are lined with G-LOFT®, a light thermal insulation that provides insulation properties similar to down, but which also remains functional in wet condition. Improving thermal insulation and fast drying time - the air/pac® inserts form an 8 mm thick air barrier between your skin and the outer fabric. This stops warm air, which provides the necessary heat and yet dries extremely quickly. Efficient weight distribution - Because the air/pac® inserts have a dampening effect, they help distribute the weight of heavy backpacks or plate carriers. Material Outer layer: 100% polyester; PU membrane; Filling arm: 100% polyester (80 g / m2 G-LOFT®); Sleeve filling: wool, polyester (130 g / m2 37.5TM of COCONA® Inc.); Inner lining: 56% polyester (180 g / m2), 44% polyester fiber (37.5 ™ COCONA® Inc.); air / pac® inserts in the shoulder and back area Reviews Details:- First-class thermal protection.
- Windproof and water repellent.
- Extremely efficient moisture regulation.
- With CORDURA® reinforced elbows.
- Removable air/pac® inserts in the shoulder and upper back.
- Two front pockets.
- Front zipper.
- Wrist warmer with openings for the wristwatch.
- Collar width adjustment.
- Weight: approximately 900 g (size M).
-
Not in stock - on order
The 5.11 Tactical All Missions-Plate carrier offers a high level of comfort, a secure fit and freedom of movement thanks to its flexible, customizable design. HYPALON® wide and padded shoulder straps ensure even weight distribution and removable chest and back cushions ensure optimal ventilation and thus prevent heat development. The front and back are equipped with laser-cut MOLLE-Velcro and HEXGRID® panel, providing individual equipment with MOLLE or Velcro-compatible equipment. The HEXGRID® panels are removable and can be replaced with 5.11 Gear Set ™-compatible equipment. The HEXGRID® mounting platform is MOLLE-compatible and offers vertical, horizontal and diagonal assembly capabilities thanks to its special honeycomb-like structure. The All Missions record carrier also offers three abdominal strap options: fast-circuit belts, elastic stretch with plug-in capability for radio, magazines or side plates, and a HEXGRID®-abdominal strap. The All Missions plate carrier is suitable for all common protective plates, such as SAPI and ESAPI. Material Main material: 100% nylon 500D; HEXGRID®: 420D / 1000D Cordura® nylon; Duraflex® hardware. Details:- 5.11 Gear Set ™ compatible.
- Padded and adjustable shoulder straps made of HYPALON®.
- Detachable bodypads (chest and back).
- 1 patented HEXGRID® assembly panel.
- 1 patented HEXGRID® kangaroo bag mounting panel.
- MOLLE Velcro surfaces at the front and back.
- Velcro loops for cable management.
- Extendable recovery and rescue lever.
- Suitable for all common protective plates, such as SAPI and ESAPI.
- Triple abdominal strap option (webbing, elastic waistband and HEXGRID®)
- Possibility of lateral insertion for eg. Radio, magazines and side protection plates.
- GSA/TAA compatible.
- Weight: approx. 1440 g (size S / M).
-
Not in stock - on order
The RUSH72 ™ is designed as a 72-hour bag with full functionality that provides plenty of room for equipment and accessories, while remaining robust and reliable enough for extended excursions or tactical deployments. Compatible with 5.11® Tier system and the Rush Tier Rifle Sleeve, the package offers unparalleled storage capacity, a wraparound MOLLE and SlickStick compatible web platform, adjustable shoulder and chest straps, a 60-oz. hydration bag and durable, water-resistant construction. It's a backpack built to be prepared for anything. Buy the Rush collection. Dimensions Main compartment - 23 "H x 13.5" L x 8.5" Front compartment - 15.5" x 11.5" x 2 " Hydration bag -21 "x 13.5" Left and right side pockets - 42.5 x 15 x 1.75" Total capacity - 3342 cubic inches / 55 liters Weight - 5.5 pounds DETAILS FEATURES Ideal for recreational use or as an operational bug-out bag Compatible with 5.11® Tier system Double zipper front and main compartments with preformed hand handles Multiple integrated storage compartments Made of very strong, water-repellent 1050D nylon (MultiCam®: 1000D nylon) Management bag to store maps, pens and documents Fleece-lined sunglasses bag Internal hydration compartment with hangers and toggles Cinch waistband and double compression belts Adjustable shoulder straps with double-density closed cell structure Contour bracket system with handle Robust, self-healing YKK® zipper Integrated drainage throughput 5.11's signature Centerline ™ design Imported Personalize your bag with purpose-built pouchesThis article was replaced by the 5.11 Tactical Rush 72 2.0 version. Discover it here. -
Not in stock - on order
The UF PRO® Combat Pants Striker XT Gen.2 not only offers all the necessary elements such as reliable knee protection and functional pocket configuration, but above all full freedom of movement and the highest level of comfort. To achieve this, the Schoeller® Dynamic Stretch material, the wear-resistant CORDURA® fabric and the polyester-cotton ripstop material were combined on specific parts of the body to achieve the best overall performance. The separately available Striker XT knee protection system provides reliable protection against bumps or sharp objects and is above all very comfortable to wear. Because of the anatomical cut, you don't have to tie anything around the knee to fix it in the correct position. The cushions are pushed into the compartments on the knee. The pads have a flexible structure and therefore form the knee ergonomically. The trousers can be equipped with three different types of knee pads that can be worn together or separately. The UF PRO® Flex SAS-TEC pads protect against shocks. The UF PRO® Flex-Soft Pads offer extra padding if you need to kneel frequently - especially with heavy equipment. If you need extra protection from sharp objects, the UF PRO® Solid Pads are the right choice. The Striker XT combat pants have a total of 13 pockets (excluding the inner pockets). They provide ample storage space for all important equipment and provide access to it at any time. The anatomical cut of the pants ensures that everything stays in place, even if you move and don't dangle. The Striker XT pants are designed as a team player with respect to the rest of your equipment. You can attach a belt (or even a combat belt) to the double belt loops or boots to the boot hooks. You can wear the Striker XT pants all year round. If it's too hot, you can easily open the knee pad pockets and feel an extra air circulation within seconds. You can also wear them during missions below zero degrees Celsius. The inner zipper allows a separately available WINDSTOPPER® lining to be attached to the trousers, providing comfortable protection against wind and cold. Material Upholstery: 80% cotton, 20% polyamide; Stretch inserts: Schoeller® dynamic: 92% polyamide 8% elastane: knee and hem reinforcements: 100% polyamide (CORDURA®) Reviews Details:- Double belt loops.
- Elastic waistband.
- The ergonomic UF PRO® 3-layer knee protection system.
- Width adjustment in the hem of the trouser legs.
- Fly with double slider.
- Zipper in the waistband for WINDSTOPPER® lining.
- CORDURA® reinforcements in the trouser legs, hem and knees.
- Shoe loop.
- IRR coating to reduce ir signature.
- 2 front pockets.
- 2 back pockets.
- 1 safety bag.
- 2 horizontally and vertically accessible side pockets with large storage space and inner pockets.
- 2 Attached equipment bag with removable safety valve and pen compartment.
- 2 warehouse/knife/marker bag.
- 2 large pockets on the lower leg.
-
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for special forces requirements, PSD operations as well as Police Tactical Operations/SWAT. The shoulders are fully adjustable and have an emergency release on one side, freeing the left shoulder area and allowing the operator to remove the rig without having to remove his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). The DCS DA 5.56 mm (Direct Action) comes standard with 5 x Open Mags for 5.56 mm Magazines and 2 x Small Utility/Medic Pouch. -
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The Dynamic Combat System (DCS) is a lightweight, unobtrusive system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The DCS can contain large plates at the front and back and has the option to wear side plates "6 x 6" or "6 x 8". NEXUS N.I.J. Level 3a Front, Back and Side Armor can also be used with I.C.W. style plates and for additional protection against I.E.D.s armor carrier, with detachable sides. The shoulders are fully adjustable and have an emergency release on one side, which frees the left shoulder area and allows the operator to remove the rig without taking off his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D Spacer Mesh lining is used for comfort and allows body heat away from the body surface while helping with airflow to cool. The DCS is designed to be worn in conjunction with the Warrior Frag Belt (sold separately). -
Not in stock - on order
New version of our popular Pintail Explorer Smock. The Smock is very light and has a new, better breathable membrane and a small design update! The Smock is also ideal as a backup in your backpack when the weather turns! Attributes- 100% waterproof and windproof
- Improved breathability
- Improved water column
- New design
- Lightweight
- Large chest pocket with magnetic closure
- Waterproof zippers
- Adjustable cuffs
- Size advice: falls normally
- Material: 100% polyester
-
Pintail Explorer Pants Teak The matching Outdoor pants for the Pintail Smock and the Torrent Euro II jacket. The pintail pants are waterproof, windproof and extremely quiet and breathable. DePintail pants have pockets with water-repellent zippers to 100% protect the valuable contents from wetness. The absolute highlight of the pants, however, is the protected Tri-Fit leg adjustment system. Many people have a big problem finding waterproof pants in the right leg length because the waist is too wide or too tight for the right length. As a rule, pants with a waterproof membrane can not be easily cut. The Pintail Explorer Pants has a smart system where the wearer can adjust the pants to the right leg length in just a few steps. The pants are sturdy and suitable for almost all conceivable conditions.- Bonded fleece
- Waterproof and windproof
- Light weight QUIET-TEX 5KTM fabric
- Membrane waterproof rating: 10,000mm H²0
- Breathability rating: 5,000 g/m²/24hrs
- Reinforced knees and butt
- Articulated knees
- Waterproof zips on thigh pockets
- Unique adjustable leg
- Waterproof zips on hip pockets
- Contrasting colours
- Elasticated waist with belt loops.
-
The Condor Vanquish RS plate carrier from the Vanquish Armor System (VAS) is made of a robust nylon construction and has fast-opening connectors that allow the user to quickly remove the carrier in an emergency. Compared to conventional MOLLE loops, the Lasercut MOLLE is lighter, more resistant to cracks and has a flat profile. The Vanquish RS Plate Carrier can be individually adapted to the missions, for example it has removable front/back cushions, laser-cut MOLLE and laser-cut MOLLE Velcro on the front and back. Suitable for Medium and Large Swimmer / ESAPI plates up to 25 x 30 cm. Material- 100% polyamide
- Inner lining: 100% polyester
- Quick release system with ROC buckles on the shoulders and sides.
- Laser-cut MOLLE laminate on the front, back and sides.
- Adjustable shoulder straps.
- Adjustable abdominal strap with Velcro pockets for ballistic inserts.
- Removable inner lining.
- Flat card/ document bag with Velcro closure.
- Easily accessible plate bags.
- Suitable for protective plates up to about 25 x 30 cm.
- Recovery handle.
- Velcro surfaces on the front and back for ID patches.
- Compatible with VAS accessories.
- Weight: about 1189 grams.
-
Not in stock - on order
The Lowa Zephyr MK2 GTX HI is a mission boot with the ideal balance of maneuverability, lightness and stability. The HI-CUT upper provides the support needed during skydiving and fast roping. The upper is made of a combination of water-repellent, tear-resistant suede and abrasion-resistant, breathable CORDURA® material. An innovative locking hook makes it possible to adjust the laces individually at the forefoot and ankle. The waterproof, highly breathable GORE-TEX Extended Comfort laminate is ideal for use in temperate or relatively wet environments. The double-layer PU midsole with a MONOWRAP® frame surrounds and supports the foot like an exoskeleton. The ZEPHYR MK2 GTX HI is certified as a work footwear according to EN ISO 20347:2012. It is antistatic and has a cold and heat-insulating sole. The outsole is not only non-slip - it is also resistant to oil, gasoline and contact heat. GUARANTEED PROTECTION AGAINST THE WEATHER - EVEN IN HOT TEMPERATURES. GORE-TEX Extended Comfort Footwear Guaranteed protection against the weather, even in hot temperatures: The ZEPHYR MK2 GTX HI is equipped with a GORE-TEX Extended Comfort footwear membrane. The innovative technology offers optimal waterproof protection and breathability. Permanently waterproof The membrane provides reliable waterproof protection. No matter what kind of activity you're planning, you can count on GORE-TEX technology to keep your feet pleasantly dry. High breathability GORE-TEX shoes are designed with optimal breathability in mind and are a joy to wear even in intense activities and hot weather. Water cannot enter the shoe, and moisture produced in the shoe escapes through billions of pores in the GORE-TEX membrane. Windproof The GORE-TEX membrane reliably repels wind and weather. This allows you to go on the road, regardless of the weather. LACING WITH TWO ZONES, SO THE SHOES FIT WELL Thanks to the two-zone lacing system used in the ZEPHYR MK2 GTX HI, the forefoot and upper have their own separately adjustable lacing zones. This allows the shoe to be individually adapted to the anatomy of the foot and strung in different ways for climbs and descents. DOUBLE INJECTION, UPPER AND SOLE BECOME A FIXED UNIT For effective cushioning and increased comfort, the sole of the ZEPHYR MK2 GTX HI is attached to the upper in a technically demanding injection process. The upper is placed in a specially designed mold. Then several layers of PU foam are poured into it. During this process, the sole and upper material are fastened together. Lightweight For this process, a plastic called polyurethane is used. It is a very light foam filling. Damping The plastic polyurethane is a foam filling with very good damping properties. The plastic retains its shape and bounces back to its original state, even when the millions of small bubbles are often pressed together. This, in turn, creates a good rebound effect. A wide range of design options Thanks to direct injection, the sole can be designed in a very large number of ways. Due to the versatile properties of the materials used, the shoes can be effective in a large number of areas. STABLE FRAME With the LOWA-MONOWRAP® frame, the midsole of the ZEPHYR MK2 GTX HI offers the very best comfort. This three-dimensional design of the midsole was developed by LOWA in 1995. The frame cradles the foot comfortably and supports it when the wearer of the shoe ventures over uneven surfaces. The sole design is slightly raised for shoes with a STABILITY FRAME. Good conductivity of the foot The foot fits optimally in the shoe thanks to the three-dimensional design of the frame. Increased comfort The special design of the midsole ensures that the foot fits well in the shoe. The foot is pleasantly cradled by the three-dimensional frame. Lightweight The LOWA-MONOWRAP® is made of a plastic called polyurethane. It is a very light material. -
The Lowa Zephyr MK2 GTX HI is a mission boot with the ideal balance of maneuverability, lightness and stability. The HI-CUT upper provides the support needed during skydiving and fast roping. The upper is made of a combination of water-repellent, tear-resistant suede and abrasion-resistant, breathable CORDURA® material. An innovative locking hook makes it possible to adjust the laces individually at the forefoot and ankle. The waterproof, highly breathable GORE-TEX Extended Comfort laminate is ideal for use in temperate or relatively wet environments. The double-layer PU midsole with a MONOWRAP® frame surrounds and supports the foot like an exoskeleton. The ZEPHYR MK2 GTX HI is certified as a work footwear according to EN ISO 20347:2012. It is antistatic and has a cold and heat-insulating sole. The outsole is not only non-slip - it is also resistant to oil, gasoline and contact heat. GUARANTEED PROTECTION AGAINST THE WEATHER - EVEN IN HOT TEMPERATURES. GORE-TEX Extended Comfort Footwear Guaranteed protection against the weather, even in hot temperatures: The ZEPHYR MK2 GTX HI is equipped with a GORE-TEX Extended Comfort footwear membrane. The innovative technology offers optimal waterproof protection and breathability. Permanently waterproof The membrane provides reliable waterproof protection. No matter what kind of activity you're planning, you can count on GORE-TEX technology to keep your feet pleasantly dry. High breathability GORE-TEX shoes are designed with optimal breathability in mind and are a joy to wear even in intense activities and hot weather. Water cannot enter the shoe, and moisture produced in the shoe escapes through billions of pores in the GORE-TEX membrane. Windproof The GORE-TEX membrane reliably repels wind and weather. This allows you to go on the road, regardless of the weather. LACING WITH TWO ZONES, SO THE SHOES FIT WELL Thanks to the two-zone lacing system used in the ZEPHYR MK2 GTX HI, the forefoot and upper have their own separately adjustable lacing zones. This allows the shoe to be individually adapted to the anatomy of the foot and strung in different ways for climbs and descents. DOUBLE INJECTION, UPPER AND SOLE BECOME A FIXED UNIT For effective cushioning and increased comfort, the sole of the ZEPHYR MK2 GTX HI is attached to the upper in a technically demanding injection process. The upper is placed in a specially designed mold. Then several layers of PU foam are poured into it. During this process, the sole and upper material are fastened together. Lightweight For this process, a plastic called polyurethane is used. It is a very light foam filling. Damping The plastic polyurethane is a foam filling with very good damping properties. The plastic retains its shape and bounces back to its original state, even when the millions of small bubbles are often pressed together. This, in turn, creates a good rebound effect. A wide range of design options Thanks to direct injection, the sole can be designed in a very large number of ways. Due to the versatile properties of the materials used, the shoes can be effective in a large number of areas. STABLE FRAME With the LOWA-MONOWRAP® frame, the midsole of the ZEPHYR MK2 GTX HI offers the very best comfort. This three-dimensional design of the midsole was developed by LOWA in 1995. The frame cradles the foot comfortably and supports it when the wearer of the shoe ventures over uneven surfaces. The sole design is slightly raised for shoes with a STABILITY FRAME. Good conductivity of the foot The foot fits optimally in the shoe thanks to the three-dimensional design of the frame. Increased comfort The special design of the midsole ensures that the foot fits well in the shoe. The foot is pleasantly cradled by the three-dimensional frame. Lightweight The LOWA-MONOWRAP® is made of a plastic called polyurethane. It is a very light material. -
New version of our popular Pintail Explorer Smock. The Smock is very light and has a new, better breathable membrane and a small design update! The Smock is also ideal as a backup in your backpack when the weather turns! Attributes- 100% waterproof and windproof
- Improved breathability
- Improved water column
- New design
- Lightweight
- Large chest pocket with magnetic closure
- Waterproof zippers
- Adjustable cuffs
- Size advice: falls normally
- Material: 100% polyester
-
Following in the footsteps of the original Ultra Light, launched 40 years ago, the new Aku Ultra Light Original GTX combines the comfort and softness of a modern high-speed walking shoe, with a timeless classic style. Suitable for daily treks on easy and medium terrain, the Ultra Light Original GTX is also ideal for lighter, more relaxing activities in the great outdoors. Made of selected and high-quality materials that are 100% traceable. Details- UPPER: suede 1,4 mm/air 8000®
- LAYOUT: gore-tex® performance comfort
- OUTSOLE: vibram® erica everest
- MIDSOLE: double density that cut eva
- DURABLE SHELF (STIFFNESS): 4-2 mm texon + tpu (extra flexible)
- FOOT BLADE: custom made
- WEIGHT (GR. 1/2 PAIR): 420
- SIZE RANGE (UK): 3 - 9
-
The All Hazards Prime is meaner than your average bag. Designed with input from MACTAC instructors, the bag's main compartment can contain 2 ammo mules or other equipment, while the front panel unzips 180 degrees for full access to a MOLLE and SlickStick-compatible medical compartment. The bag has an internal laptop case, a special compartment for hydration or armor and a universal storage bag for quickly storing a helmet or jacket. Also with a fleece-lined sunglasses pocket, side-mounted fasteners and a handle at the top. Each compartment is lined with highly visible orange to help in low light. Show up with the All Hazards Prime and watch them spread.Dimensions Main compartment - 11.5" x 7.5" x 20.5" Total capacity - capacity of 1,768 cubic inches Weight - 4.5 pounds Suitable for a 15" laptop DETAILS FEATURES Ripe medical bags Padded laptop case Hydration compartment Durable 1050D nylon Interior web platform Exterior web platform with three surfaces Retractable pocket for expandable storage Side-mounted catch lines Reinforced handles Adjustable compression straps Orange striking lining on the front panel Ammo Mule compatible (not included) Personalize your bag with purpose-built pouches Suitable for a 15" laptop 5.11's signature Centerline ™ design Imported -
The Aku Pilgrim DS Combat is a true multifunctional, highly breathable boot with a nitrile sole, excellent support, stability and shock absorption. The DS Combat features full-grain leather around the laces for added durability, an anti-static sole and heat resistance, and a new color compared to the original Pilgrim DS. Designed for the desert for carrying heavy loads or performing heavier tasks in rough terrain. Attributes Nitrile Vibram Foura The Vibram Foura mountain sole is designed to carry you through any terrain. From rugged trails to sensitive tactical environments, he's here for you. - The specially designed rubber compound is anti-static nitrile rubber, heat-resistant in accordance with EN ISO 20345 clause 6.4.4. (tested in accordance with ISO 20344 clause 8.7 level 300 °C) and POL Petrol Oil Lubrificant resistance in accordance with ISO 20345 5.8.7 (tested in accordance with ISO 20344 clause 8.6.1). AIR8000 With a focus on comfort and breathability, the AIR 8000 upper fabric provides extra breathability so you can stay hotspot-free all day long. Elica Natural Walking System The Elica Natural Stride System provides an anatomical fit for better stability and weight distribution across the sole of your shoe. This improved fit reduces pressure points and encourages better posture and form of movement, reducing fatigue and providing more comfort. Details- Lining Description: Breathable Woven Polyester
- Sole: Antistatic Nitrile Vibram Foura
- Footbed: AKU Custom Fit with IMS
- Stiffness: Medium
- Permanent shelf: 4-6mm Nylon + EVA
- Midsole: Die Cut EVA
- Upper: 1.8mm full-grain leather, Air8000 fabric & Bycast trim
- Equipped with new soles: Yes
- Shaft height: 130mm Size 9 (+/- 4mm per size)
- Weight: 628 grams per boot
- Handmade by AKU in Romania
-
5.11 Tactical® brings you the TacTec ™ Plate Carrier, which is designed to be the most lightweight and best-fitting plate carrier you can find and constructed to ensure high performance while remaining light and mobile. Dimensions Suitable for 24 mm wide medium (12.5" H x 9.5" L x 2 "B) and large (13.25" x 10.25 " x 2.25") SAPI plates Standard abdominal straps are suitable for a circumference of 52" with the elastic relaxed, and up to 57" when fully stretched DETAILS FEATURES Improved comfort and freedom of movement Suitable for medium or large ballistic plates Shoulder pads on the back yote evenly distribute the weight Hard-wearing 500D nylon Adjustable waist and tension bands (sizes XS-XL) Extendable GrabDrag handle for emergency exfiltration Quick-tensioner with one hand Water-repellent coating Extra-large airflow panels Durable Duraflex® hardware Web ID loop Suitable for Rogue® men's and women's weight vests -
Not in stock - on order
Unisex shooting vest with M.O.L.L.E system on the pockets, breathable inserts of 4-way stretch 3D mesh and slide at the front of eco-suede. With the experience gained in the military segment, Beretta has launched the first shooting vest equipped with the M.O.L.L.E system: thanks to this innovative technique, you can decide where to place the front pockets. The M.O.L.L.E. Shooting Vest is made of high-quality materials, such as the front in eco suede and breathable inserts in 4-way stretch 3D mesh. Shooting vest Whether you're a professional or an amateur, the shooting vest is the essential garment for a shooter. That's why the Beretta Shooting Vest line offers shooting vests designed and realized according to different needs, so you can choose the one that best suits you.- Elastische inzetstukken op de schouders.
- Slide in front in eco suede.
- Expandable front pockets with dual input with M.O.L.L.E system.
- Breathable inserts of 3D 4-way stretch mesh.
- Breast pocket with Velcro closure.
- Beretta Uniform Pro logo on the chest.
- Elastic adjustable strap on the back.
- Beretta logo on the back.
- Polyester and cotton fabric.
-
An extremely durable construction, unbeatable comfort, functional pocket configuration and reliable knee protection make the UF PRO P-40 All-Terrain tactical pants that give you a decisive advantage in any terrain or activity. Large Schoeller®-dynamic stretch inserts in the seating area and a special anatomical fit go hand in hand so you can enjoy unparalleled freedom of movement. Breathable, lightweight ripstop material and ventilation zippers on the knees make you feel comfortable all day or all night. The P-40 All-Terrain Gen.2 has a cut to keep the knee protection accessories in place and barely stand out. Instead, you'll see how well the knee pads work - they're always there when you kneel and they're always ready to give you the right protection. Best of all, no straps or straightening are needed to keep them in place. It is fully compatible with the separately available UF PRO 3D Tactical knee pads. These pads are available in two versions: CUSHION for extra cushioning for long knees and IMPACT for protection from the effects of foam-based force from sudden, hard shocks. The P-40 All-Terrain Gen. 2 tactical pants have nine spacious, functional pockets that allow you to store lots of personal gear and compact tools. The large side pockets contain inner pockets made of blade®-dynamic fabric. This allows you to store extra gear that stays in place (the design and construction of the inner pockets are designed so that the gear doesn't slide in when you move, making the pants perform better, and it also makes you more comfortable doing your job, so you don't have to worry about important things falling out). The P-40 All-Terrain is made of very breathable PolyCo ripstop material. Sweat or light rain dry very quickly in this fabric. When the temperature is below zero, the P-40 All-Terrain can easily be converted into thermopants. It is compatible with the windproof UF PRO WINDSTOPPER® interior lining. material Upholstery: 67% polyester, 33% cotton ripstop mix; Stretch inserts: 80% polyamide, 10% polyester, 10% elastane (Schoeller®-Dynamic); Reinforcements: 100% nylon (500D CORDURA®); YKK® zippers; YKK® button Details:- Breathable, light polyceny ripstop material.
- Raised waistband.
- Stretch inserts in the waistband.
- Schoeller®-dynamic stretch material in the seating area.
- Pull-Fly gulp with double zipper, button-up and clamp hook.
- 2 hand pockets with Cordura reinforcements for mesclips.
- 1 zippered safety bag in the left pocket.
- 2 zippered back pockets and CORDURA® reinforcement.
- 2 double-entry thigh pockets, large storage space, special inner pockets and a mounted CORDURA®-reinforced material pocket with safety valve.
- 2 knife bags with CORDURA® reinforcement.
- 5 double belt loops reinforced with CORDURA®.
- Knee pockets that are accessible from the outside for the easy insertion of the 3D Tactical knee pads (sold separately).
- Ventilation zips on the knees.
- With CORDURA® strengthened knee area.
- With CORDURA® strengthened instep and knee.
- D-ring on the belt loop at the front.
- Adjustable hem with boot hook.
- Inside zipper for removable WINDSTOPPER® lining (sold separately).
-
Weight: 690 g Dimensions: 2 sections of 21 x 34 cm. 6 rows of webbing Fits in: All pouches, holsters and many other things Fits on: On the upper body Features:Large, lightweightand comfortable modular carrier for the front of your body.Designed to sit comfortably on your body, under your backpack.Please note that pouches and holster are separate products, not included in this carrier.- Large area to attach pouches on
-
You can attach 6 magazine pouches, 3-4 grenade pouches, 2 GP pouches, 2 storage pouches and 1 GPS pouch on the carrier
-
Velcro opened pockets with inside elastic compartments in the front panels
-
Waist belt that allows the panels to slide back to leave the front flat. It gives you a lower profiule and it is easier to reach the pouches.
-
The waist belt has a channel for cable ties
-
Front opening to make it easier to put the carrier on
-
You can close the front and move the belt opening toi the side to get a traditionall chest rigg
-
Front closure with 2 adjustable side release buckles
-
H shaped harness to sit comfortably
-
Padded and comfortable shoulder bands with attachment bands on, so you can attach pouches there
- Velcro patch on the back of the harness to attach your name
-
Specially optimized for women's feet, the ZEPHYR MK2 GTX MID boot is the perfect combination of agility, lightness and stability. It is ideal for special, military, police and all armed forces. The mid-height shaft supports the foot during descents in free-rope and does not restrict movement during close combat. It has Velcro fasteners with a closed structure, which are especially useful for keeping laces in place and not snagging. It's made from a mix of water-repellent, tear-resistant suede and abrasion-resistant, breathable CORDURA® material. With a locking hook, the lacing can be perfectly adjusted at the forefoot and ankle. Lacing technology with two separate lacing zones on the forefoot and upper. This means that the shoe can be adjusted to the anatomy of the foot and laced differently for ascents and descents. Thanks to the waterproof and breathable GORE-TEX Extended Comfort Footwear membrane, this model is ideal for work in temperate or wet areas. The double-layer PU midsole is reinforced with a MONOWRAP® structure, which supports the foot like an exoskeleton. The ZEPHYR MK2 GTX MID is a certified professional boot. Features- Intervention shoe
- Waterproof and breathable properties
- GORE-TEX Extended Comfort waterproof/breathable lining
- Inner protection to prevent premature wear due to descent
- Good heel padding to minimize the impact of the landing
- Closed lace hooks to prevent accidental snagging during airborne activities
- 2 separate lacing zones on the forefoot and upper
- Comfort insole
- Midsole with LOWA MONOWRAP® structure to support the foot
- Slip-resistant "Lowa® X-Trac Military" outsole
- Optimal grip on smooth, wet and greasy surfaces.
- Non-slip, resistant to oil, gasoline and contact heat.
- The outsole is also antistatic and has a heat- and cold-insulating sole.
- Women's Size: UK 3 - 6.5
- Shaft Height: Medium
- Weight/pair (UK size 5) : 970 g
- Color : Drak Brown (493)
- Work shoe certified according to DIN EN ISO 20347:2012 / Code: O2 HI CI WR HRO FO SRC
- Direct injection molding of the sole
- Polyurethane foam
- Double-layer midsole injected directly into the shoe
- Midsole: 100% polyurethane (PU)
- Outsole: Special rubber compound
- Insole: approx. 9% polyamide / approx. 90% polyurethane (PU)
- Outer material: 80% suede leather, 20% textile
- Lining: 100% GORE-TEX Extended Comfort Footwear
-
The AKU Selvatica Tactical Mid GTX operational shoe is designed for the tactical area and use in various fields. A PU-treated skeleton in the upper and sole supports the shoe in a breathable and dynamic way and eliminates the need for seams. The exclusive AKU Elica Natural Stride System technology in the midsole optimizes biodynamic efficiency while running. The Vibram® Selvatica Megagrip outsole with an improved ground contact surface provides better all-round traction. Antimicrobial and breathable OrthoLite® insoles ensure optimal shock absorption. The upper material consists of highly resistant 3D nylon AIR 8000®. AIR 8000® is a materials technology developed by AKU that provides functional shoes with optimized breathability and fast-drying material properties. Thanks to the use of highly water-vapor-permeable functional fabrics, shoes with AIR 8000® have up to 11 times faster moisture regulation than comparable models made from fast-drying materials. The GORE-TEX® Insulated Comfort membrane also makes it waterproof. Material- Top material: AIR8000® + welded PU film;
- Interior: GORE-TEX® EXTENDED COMFORT;
- INNER SOLER (STIFFNESS): 2,0 MM POLYPROPILEEN + EVA MICROPOROSA;
- Sole: rubber (VIBRAM® SELVATICA MEGAGRIP)
- Light and comfortable.
- Waterproof and breathable.
- Seamless upper material by PU-treated skeleton.
- Lacing system with pull stopper.
- Toe and heel cap.
- Antimicrobial and breathable OrthoLite® insoles.
- Vibram® Selvatica Megagrip outsole for optimal all-round grip.
- Pull-on loop.
- Height shaft: 13 cm.
- Weight: approx. 460 g / shoe (size 42).
-
The AKU Selvatica Tactical Mid GTX operational shoe is designed for the tactical area and use in various fields. A PU-treated skeleton in the upper and sole supports the shoe in a breathable and dynamic way and eliminates the need for seams. The exclusive AKU Elica Natural Stride System technology in the midsole optimizes biodynamic efficiency while running. The Vibram® Selvatica Megagrip outsole with an improved ground contact surface provides better all-round traction. Antimicrobial and breathable OrthoLite® insoles ensure optimal shock absorption. The upper material consists of highly resistant 3D nylon AIR 8000®. AIR 8000® is a materials technology developed by AKU that provides functional shoes with optimized breathability and fast-drying material properties. Thanks to the use of highly water-vapor-permeable functional fabrics, shoes with AIR 8000® have up to 11 times faster moisture regulation than comparable models made from fast-drying materials. The GORE-TEX® Insulated Comfort membrane also makes it waterproof. Material- Top material: AIR8000® + welded PU film;
- Interior: GORE-TEX® EXTENDED COMFORT;
- INNER SOLER (STIFFNESS): 2,0 MM POLYPROPILEEN + EVA MICROPOROSA;
- Sole: rubber (VIBRAM® SELVATICA MEGAGRIP)
- Light and comfortable.
- Waterproof and breathable.
- Seamless upper material by PU-treated skeleton.
- Lacing system with pull stopper.
- Toe and heel cap.
- Antimicrobial and breathable OrthoLite® insoles.
- Vibram® Selvatica Megagrip outsole for optimal all-round grip.
- Pull-on loop.
- Height shaft: 13 cm.
- Weight: approx. 460 g / shoe (size 42).
-
Footwear designed for the emergency intervention forces and for multi-terrain activities, perfect for moving quickly in comfort. Super light, breathable and dynamic support in the upper and sole of the shoe, with the former featuring ridges pre-treated with PU protection, eliminating stitching. The profile of the sole has been developed with the exclusive AKU Elica Natural Stride System technology to optimize biodynamic efficiency. The tread pattern is Vibram® Selvatica Megagrip with an optimized surface in contact with the ground for better traction all around. OrthoLite® antimicrobe and breathable insole, with optimal shock absorption. Material- Top material: AIR8000® + welded PU film;
- Interior: GORE-TEX® EXTENDED COMFORT;
- INNER SOLER (STIFFNESS): 2,0 MM POLYPROPILEEN + EVA MICROPOROSA;
- Sole: rubber (VIBRAM® SELVATICA MEGAGRIP)
- Light and comfortable.
- Waterproof and breathable.
- Seamless upper material by PU-treated skeleton.
- Lacing system with pull stopper.
- Toe and heel cap.
- Antimicrobial and breathable OrthoLite® insoles.
- Vibram® Selvatica Megagrip outsole for optimal all-round grip.
- Pull-on loop.
- Weight: approx. 425 g / shoe (size 42).
-
An extremely durable construction, unbeatable comfort, functional pocket configuration and reliable knee protection make the UF PRO P-40 All-Terrain tactical pants that give you a decisive advantage in any terrain or activity. Large Schoeller®-dynamic stretch inserts in the seating area and a special anatomical fit go hand in hand so you can enjoy unparalleled freedom of movement. Breathable, lightweight ripstop material and ventilation zippers on the knees make you feel comfortable all day or all night. The P-40 All-Terrain Gen.2 has a cut to keep the knee protection accessories in place and barely stand out. Instead, you'll see how well the knee pads work - they're always there when you kneel and they're always ready to give you the right protection. Best of all, no straps or straightening are needed to keep them in place. It is fully compatible with the separately available UF PRO 3D Tactical knee pads. These pads are available in two versions: CUSHION for extra cushioning for long knees and IMPACT for protection from the effects of foam-based force from sudden, hard shocks. The P-40 All-Terrain Gen. 2 tactical pants have nine spacious, functional pockets that allow you to store lots of personal gear and compact tools. The large side pockets contain inner pockets made of blade®-dynamic fabric. This allows you to store extra gear that stays in place (the design and construction of the inner pockets are designed so that the gear doesn't slide in when you move, making the pants perform better, and it also makes you more comfortable doing your job, so you don't have to worry about important things falling out). The P-40 All-Terrain is made of very breathable PolyCo ripstop material. Sweat or light rain dry very quickly in this fabric. When the temperature is below zero, the P-40 All-Terrain can easily be converted into thermopants. It is compatible with the windproof UF PRO WINDSTOPPER® interior lining. Material Upholstery: 67% polyester, 33% cotton ripstop mix; Stretch inserts: 80% polyamide, 10% polyester, 10% elastane (Schoeller®-Dynamic); Reinforcements: 100% nylon (500D CORDURA®); YKK® zippers; YKK® button Details:- Breathable, light polyceny ripstop material.
- Raised waistband.
- Stretch inserts in the waistband.
- Schoeller®-dynamic stretch material in the seating area.
- Pull-Fly gulp with double zipper, button-up and clamp hook.
- 2 hand pockets with Cordura reinforcements for mesclips.
- 1 zippered safety bag in the left pocket.
- 2 zippered back pockets and CORDURA® reinforcement.
- 2 double-entry thigh pockets, large storage space, special inner pockets and a mounted CORDURA®-reinforced material pocket with safety valve.
- 2 knife bags with CORDURA® reinforcement.
- 5 double belt loops reinforced with CORDURA®.
- Knee pockets that are accessible from the outside for the easy insertion of the 3D Tactical knee pads (sold separately).
- Ventilation zips on the knees.
- With CORDURA® strengthened knee area.
- With CORDURA® strengthened instep and knee.
- D-ring on the belt loop at the front.
- Adjustable hem with boot hook.
- Inside zipper for removable WINDSTOPPER® lining (sold separately).
-
An extremely durable construction, unbeatable comfort, functional pocket configuration and reliable knee protection make the UF PRO P-40 All-Terrain tactical pants that give you a decisive advantage in any terrain or activity. Large Schoeller®-dynamic stretch inserts in the seating area and a special anatomical fit go hand in hand so you can enjoy unparalleled freedom of movement. Breathable, lightweight ripstop material and ventilation zippers on the knees make you feel comfortable all day or all night. The P-40 All-Terrain Gen.2 has a cut to keep the knee protection accessories in place and barely stand out. Instead, you'll see how well the knee pads work - they're always there when you kneel and they're always ready to give you the right protection. Best of all, no straps or straightening are needed to keep them in place. It is fully compatible with the separately available UF PRO 3D Tactical knee pads. These pads are available in two versions: CUSHION for extra cushioning for long knees and IMPACT for protection from the effects of foam-based force from sudden, hard shocks. The P-40 All-Terrain Gen. 2 tactical pants have nine spacious, functional pockets that allow you to store lots of personal gear and compact tools. The large side pockets contain inner pockets made of blade®-dynamic fabric. This allows you to store extra gear that stays in place (the design and construction of the inner pockets are designed so that the gear doesn't slide in when you move, making the pants perform better, and it also makes you more comfortable doing your job, so you don't have to worry about important things falling out). The P-40 All-Terrain is made of very breathable PolyCo ripstop material. Sweat or light rain dry very quickly in this fabric. When the temperature is below zero, the P-40 All-Terrain can easily be converted into thermopants. It is compatible with the windproof UF PRO WINDSTOPPER® interior lining. material Upholstery: 67% polyester, 33% cotton ripstop mix; Stretch inserts: 80% polyamide, 10% polyester, 10% elastane (Schoeller®-Dynamic); Reinforcements: 100% nylon (500D CORDURA®); YKK® zippers; YKK® button Details:- Breathable, light polyceny ripstop material.
- Raised waistband.
- Stretch inserts in the waistband.
- Schoeller®-dynamic stretch material in the seating area.
- Pull-Fly gulp with double zipper, button-up and clamp hook.
- 2 hand pockets with Cordura reinforcements for mesclips.
- 1 zippered safety bag in the left pocket.
- 2 zippered back pockets and CORDURA® reinforcement.
- 2 double-entry thigh pockets, large storage space, special inner pockets and a mounted CORDURA®-reinforced material pocket with safety valve.
- 2 knife bags with CORDURA® reinforcement.
- 5 double belt loops reinforced with CORDURA®.
- Knee pockets that are accessible from the outside for the easy insertion of the 3D Tactical knee pads (sold separately).
- Ventilation zips on the knees.
- With CORDURA® strengthened knee area.
- With CORDURA® strengthened instep and knee.
- D-ring on the belt loop at the front.
- Adjustable hem with boot hook.
- Inside zipper for removable WINDSTOPPER® lining (sold separately).
-
A light weight, easy to adjust and tight fitting equipment vest with many features. A 15-20 cm wide elastic size adjustment in the back. MOLLE webbing on the front, sides and back for pouches. 2 large front pockets with zipper closure. Padded adjustable shoulders. Cable routing from the back to the front. Elastic loops on the shoulders for hydration tube or radio wires. Hydration system compartment in the back pocket. Velcro patches on the front and back for name and unit patches. Four sizes: 1= 85-100 cm waist 2= 95-110 cm waist 3= 100-120 cm waist 4= 110-130 cm waist Weight Size 1: 470 g, Size 2: 500 g, Size 3: 530 g, Size 4: 640 g -
Fast walking shoe, dynamic and reliable, even on the most difficult trails. Aku Rocket DFS GTX uses the innovative Vibram Traction Lug technology that improves traction and grip by 25% thanks to its special design. The upper has a crossed rib structure and is protected by a 3D printing layer. With the exclusive AKU Dual Fit System (DFS) technology, realized here in the race walking version, you can vary the degree of precision of the fit by simply acting on the two different lacing systems. It is built with AKU Elica Natural Stride System technology to promote biodynamic efficiency. SO LIGHT IT FEELS LIKE FLYING This is the story of a dream that we have had since childhood and that AKU has fulfilled. As we climb the mountain, our eyes look up at the peaks where we can hear the ever-present coughs. When we reach the top, a light breeze makes us feel the altitude and invites us to imitate those alpine birds, so free in the air. They easily fly back to the valley. Thanks to the Rocket DFS GTX, you'll feel like you're flying even on the most challenging trails, but you'll always be firmly anchored to the ground thanks to the Vibram Traction Lug's grip. Details:- UPPER: fiber fabric + microfiber
- PROTECTION TOP: 3d print
- DESCRIPTION LINKS: gore-tex® performance comfort
- OUTSOLES: vibram rocket traction lug + vibram®® megagrip
- MIDSOLE: double density pu
- RUNNING BLADE (STIFFNESS): 2.0mm polypropylene + die cut eva
- BASE BLADE: ortholite® hybrid - partially recycled
- WEIGHT FOR MEN (GR. 1/2 PAIR): 370
- MEN'S SIZE (UK): 3 - 13
-
The Snugpak Softie 15 Intrepid was originally developed for people who work in Arctic conditions and place high demands on their performance. It offers maximum heat at extreme temperatures and is still relatively small and handy. The Softie® Premier filling combines the benefits of natural down with the insensitivity of synthetic fibres. It uses superfine yarns tied with special resins to create a luxurious down feel. As a result, the plastic fibre meets the highest requirements. Even in cold and wet weather, Softie® Premier insulation remains warm, light and breathable. The wind- and water-repellent Paratex Steelplate outdoor material and the Softie® Premier filling make the sleeping bag impervious to moisture. The mummy-like shape design provides extra warmth and comfort, and the form-fitting hood has an adjustable cord that guarantees comfortable sleep even as the temperature drops. A long-time favorite; This UK-made sleeping bag combines a small pack size with optimal performance for extraordinary expeditions. Temperature range comfort: -15°C. * Temperature range limit: -20°C. * material- Outer material: 100% polyamide (Paratex Steelplate);
- Inner material: 100% polyamide (Paratex Light);
- Filling: 100% polyester (Softie® Premier);
- YKK® zipper.
- Robust and windproof Paratex Steelplate outdoor material with high breathability (12 liters per m² per 24 hours).
- Soft and very light Paratex Light inner lining with high breathability (12 litres per m² per 24 hours).
- Reinforced foot section - so strong that you can even sleep with your boots on.
- Continuous 2-way zipper for optimal sleeping bag ventilation.
- Zipper on the inside filled with insulation material to prevent cold bridges along the zipper.
- Width adjustable thermal collar filled with Softie® Premier.
- Snugfit hood, pleated and equipped with a drawstring so that it has the shape of a jacket hood.
- Intake attachment and suspension belts.
- Includes compression bag.
- Length: 220 cm (suitable for a body length up to 205 cm).
- Width (chest): 80 cm.
- Width (foot area): 42 cm.
- Pack size: approx. 28 x 23 cm.
- Weight: approx. 2400 grams.
- Made in the UK.
-
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The shoulders are fully adjustable and have an emergency release on one side which frees the left shoulder area and allows the operator to remove the rig without having to remove the operator's helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). -
Not in stock - on order
Purpose Built The most populiar backpack of 5.11 Tactical is the RUSH24™ backpack. Thanks to its high quality and space, this backpack is ideal for wide use. Think of outdoor activities, tactical deployment, hunting, airsoft, but also very suitable for holidays. With 20 different compartments/ compartments, the backpack offers a huge amount of possibilities when it comes to storing your belongings. One of the unique features of the RUSH24™ backpack is that it has an integrated double admin panel for storing lots of small items like memory cards, pen, keys and other small accessories. The compartment for your camel tray/water bag offers space for a 2-litre water bag and the fleece-lined top pocket also makes it easy and well protected to bring your sunglasses or smartphone. The RUSH24™ also has a side compartment with rist in which you can easily store a bottle of water and thus remain easily accessible. Thanks to the MOLLE webbing / 5.11 SlickStick® System on the front and sides, you can also provide the backpack with several optional pouches/bags which give you even more possibilities to create more space. The RUSH backpack has an external compression strap on the left and right, easy-to-adjust shoulder straps and is made of waterproof (coating) 1050D nylon to keep your equipment dry. Please note that the zippers are NOT waterproof. Overview- The best-selling tactical backpack on the market
- High quality backpack for many purposes
- 20 Individual subjects
- 3 Mesh Admin Compartments
- 1 Side compartment with zipper for storage of eg. water bottle
- Main compartment offers a lot of space
- Integrated box for camel tray/water bag
- MOLLE webbing / 5.11 SlickStick® System on front and sides
- Grab-and-Go handle on top
- Admin box at the top of the bag is for seeing several small boxes
- Fleece padded compartment at top for sunglasses or smartphone
- Velco/Veltteband on the front for name ribbon and patches/emblems
- Waterproof 1050D nylon (in the color MultiCam® this is 1000D nylon)
- Main compartment of 50 x 31.5 x 20cm
- Front compartment of 31.5 x 28 x 5cm
- Suitable for water bags up to 2 litres
- Total backpack capacity is 37 litres
- Adjustable shoulder straps
- Two compression bands on the outside
- Shaped shoulder straps for even greater wearing comfort and good weight distribution
- Self-healing YKK® zippers
- Glove-friendly pullers on the zippers
- Possibility for attaching waistband (not included)
-
Sale!
The AKU Selvatica Tactical Mid GTX operational shoe is designed for the tactical area and use in various fields. A PU-treated skeleton in the upper and sole supports the shoe in a breathable and dynamic way and eliminates the need for seams. The exclusive AKU Elica Natural Stride System technology in the midsole optimizes biodynamic efficiency while running. The Vibram® Selvatica Megagrip outsole with an improved ground contact surface provides better all-round traction. Antimicrobial and breathable OrthoLite® insoles ensure optimal shock absorption. The upper material consists of highly resistant 3D nylon AIR 8000®. AIR 8000® is a materials technology developed by AKU that provides functional shoes with optimized breathability and fast-drying material properties. Thanks to the use of highly water-vapor-permeable functional fabrics, shoes with AIR 8000® have up to 11 times faster moisture regulation than comparable models made from fast-drying materials. The GORE-TEX® Insulated Comfort membrane also makes it waterproof. Material- Top material: AIR8000® + welded PU film;
- Interior: GORE-TEX® EXTENDED COMFORT;
- INNER SOLER (STIFFNESS): 2,0 MM POLYPROPILEEN + EVA MICROPOROSA;
- Sole: rubber (VIBRAM® SELVATICA MEGAGRIP)
- Light and comfortable.
- Waterproof and breathable.
- Seamless upper material by PU-treated skeleton.
- Lacing system with pull stopper.
- Toe and heel cap.
- Antimicrobial and breathable OrthoLite® insoles.
- Vibram® Selvatica Megagrip outsole for optimal all-round grip.
- Pull-on loop.
- Height shaft: 13 cm.
- Weight: approx. 460 g / shoe (size 42).
-
Sale!Not in stock - on order
The AMAP II is the first assault pack in the Agilite K Series with interchangeable lightweight gear. The AMAP II can function as an independent backpack using a K-series shoulder strap set or directly to the Agilite K5 Plate Carrier. Bad in seconds. This intelligent system is used by the Israeli SF and Infantry and now includes molle sides, an internal zippered compartment, an internal drinking system cover and a support system at the back of the helmet. Details • Compatible with Agilite K Series ™ • Becomes a stand-alone backpack • Dual output gates for cables, antennas and hydration • New modular sides and support bracket • External helmet wearer. • MOLLE upholstery Specs • 14 litres (854,3 cu. In.) Capacity and extra volume helmet carrier • Mil-Spec materials and polymer hardware • Made in Israel -- > Without brackets (ordered separately)This product was replaced by the Agilite AMAP III --> https://shop.afullmetaljacket.com/product/agilite-amap-iii-assault-pack/
