- Open-top pistol bags are popular, but have inherent flaws. They are often clumsy, clumsy, noisy or impossible to re-index a warehouse with one hand.
- The Pincer Pouch is lightweight, has a low profile, is quiet and you can put a magazine in it without hitches.
- The Pincer pistol pouch is incredibly versatile, with double-cut laser-cut rear MOLLE to fit perfectly on all combat belts and plate carriers.
- Includes height-adjustable flap to secure smaller items like multi-tools, flashlights and more.
- Works perfectly in combination with the Pincer Placard 2n layer admin pouch
-
Not in stock - on order
The Agilite Pincer Pistol Pouch is a MOLLE backpack for a quick-to-pull, low-profile elastic pistol magazine for a single double-stacked 9mm pistol magazine (and other similarly sized items). The magwell's patented funnel-shaped design allows you to grab or re-index a magazine with one hand. -
- Low-profile general-purpose pouch to store and organize essential items without sagging or flapping
- MOLLE mount on the back (3 MOLLE slots on the front and 3 MOLLE slots on the bottom)
- Pass-through for attachment to all straps
- Built-in shock cord gives you the ability to tie items internally without wobbling or sagging.
- Shock cord also serves as an attachment point for a Tourniquet
- Built-in internal organization, including a loop for attaching velcro inserts.
- Proven in battle in Israel
- Fits in one size
- Can be attached to any MOLLE surface: Occupies 3 MOLLE slots at the bottom and across
- 500D CORDURA® Mil Spec Tactical Nylon
- Milspec WebbingYKK Zippers
- Drainage hole
-
The Agilite Magnetix™ battle belt is designed to be the best combat belt system on the market, validated downrange in intense combat. Our goal was to eliminate all problems with existing combat belts. One of the biggest problems with combat belts is that it is difficult to align the upper and lower belts, especially under pressure. It can take multiple attempts to get a correct and comfortable fit, wasting valuable time. The Magnetix Battle Belt uses a patent-pending magnetic alignment system to ensure a perfect fit every time. Another big problem with combat belts is that you don't have a MOLLE right where you need it most, close to the buckle. The Magnetix™ Battle Belt has a full field from MOLLE to the buckle, regardless of your size. Many other combat belts sag, especially at the front of the belt. The unique design of the Magnetix™ Battle Belt ensures that the belt does not sag, even under heavy loads. One of the biggest problems with 2-piece combat belts is that the inner belt is always an afterthought. The Magnetix™ inner belt is designed to be the best inner belt on the market, to solve additional problems and to be a great everyday belt in its own right. The inner strap is optimized for CCW with a unique smart stiffening system that ensures the belt does not bend or wobble while carrying a firearm, but still bends when needed, for ultimate comfort. Many stiffened belts can be too stiff and uncomfortable. The Magnetix™ inner strap uses a range of composite materials that mold to your exact body shape over time. Most two-piece Battle Belt systems use safety buckles, but these are attached to materials with no safety rating or constructed in such a way that the belt is not given a safety rating. This means that the strap can never be safely used to be attached to an airframe. The Magnetix™ Battle Belt system is constructed to be fully ratification capable, and a classified version is available upon request. Every detail of the Magnetix™ Battle Belt system is designed to deliver two belts that give you an unparalleled advantage, whether you're defending your country at the tip of the spear, defending your community, or defending your home. Size chart
Specifications
- Magnetic alignment system for inner and outer belts
- 1000D CORDURA® Mil-Spec Tactical Nylon
- CURV® thermoplastic composite material
- Laser cut Squadron™ laminate
- COBRA® quick release buckle with D-ring
- Proven in battle in Israel
- 2 Harness system
- Tubular webbing
- 2 Inch Outer Strap
- 1.75 inch inner strap
- Full field from MOLLE to the buckle, no matter your size
- Fully customisable
- Molds to your exact body shape - Nominal version available upon request
- Magnetic alignment system for inner and outer belts
-
The K-Zero Plate Carrier is the most comfortable low plate carrier on the market. It is the only plate carrier designed directly in collaboration with both the Israeli and American Special Forces to solve all the problems with comfort and functionality of modern plate carriers. In the last decade, the desire to give plate carriers a lower profile has made them increasingly uncomfortable. The K-Zero has just as little profile, but is built to be significantly more comfortable, whether worn fully armored or for days. The Agilite own V design divides the weight over 8 different suspension points so that there are no hot spots. Strategically placed low profile closed cell padding gives you an unprecedented amount of comfort, without adding bulk or interfering with your stock weld. The K-Zero comes with a one-size fits all low profile cummerbund, so you can guarantee a perfect fit and adjust it yourself even while wearing it. It's incredibly versatile. On the front, you can switch between Velcro or quick releases, depending on your mission. It has both internal and external mounting options and stretch that doesn't detract from the space on your rear plate bag. For even heavier loads, the K-Zero is compatible with the Agilite Warfighter Cummerbund or another hook and loop-based cummerbund. With other plate carriers, cable management is at best an afterthought. With the K-Zero, it has been incorporated into everything from the start. It comes with an included cable management kit. This gives you complete versatility and the ability to set up your cables, ptts and hydration tubes exactly the way you want. The K-Zero gives you the kind of benefits that can only be gleaned through experience in the highest levels of combat in an area of the world that still performs operations every night. Whether you're defending your country on the cutting edge, defending your community, or defending your home, the K-Zero gives you an unparalleled edge. Sizing: The K-Zero has a one-size fits all cummerbund and fits perfectly to all body types and sizes. All you need to adjust is the plate pocket so that it fits the armor plates you want to put in it. Size Medium: This size fits most plates including 10x12, SAPI Medium or smaller. Size Large: This is for SAPI Large plates or other large plates up to 10.30"x13.25". *Plate bags fit all plate cutouts including: SAPI, ESAPI, Shooters Cut and Swimmers Cut. Specifications:- 500D CORDURA ® Mil Spec Tactical Nylon
- Own Mil Spec hardware
- Kevlar® coated neoprene
- Laser cut Squadron™ laminate
- Laser cut Velcro ® MOLLE overlay panels
- Integral comfort foam with closed cells
- Weight: 0.79 kg
- Most comfortable low plate carrier on the market
- Suitable for placards
- Patented "V" design distributes weight over a maximum surface area from the shoulders to the center of the mass to avoid pressure points.
- Strategically placed low profile with closed cells gives you an unprecedented amount of comfort, without adding bulk.
- One-size fits all low profile cummerbund included, so you can guarantee a perfect fit and customize it yourself while wearing it.
- Cummerbund allows you to switch between Velcro flaps or quick release buckles (quick release buckles not included).
- Looped tailgate is compatible with the Agilite Warfighter Cummerbund or any other Velcro-based cummerbund.
- Built-in cable management elements in shoulders and front and back plate pocket.
- Free cable management kit included.
- Compatible with AMAP III Assault Pack.
-
Attaches quickly and easily to the front of the Agilite Pincer™ Placard, giving it a whole new level of organization, storage and capabilities in one compact package.- Features a low profile with easily accessible administration pocket with both internal organization and a loop area for attaching velcro inserts.
- Double side panels with laser-cut MOLLE, perfect for attaching Pincer™ Pistol Mag pouches or other single-column pouches of your choice.
- 2 internal elastic loops on the back, ideal for storing chemlights, trauma scissors, markers, pens and more.
- 500D CORDURA® Mil Spec Tactical Nylon
- Laser cut Squadron™ laminate
- Laser cut Velcro overlapping panels
-
Agilite AG Mag Pouches are bungee retention pouches that allow you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way. Bungee retention may pouches have been in use for over a decade because of how well they hold warehouses. but they have an inherent, annoying flaw. They make the removal or return of a mag a clumsy, two-convenient, two-motion process because the magazine sticks to the bungeelusjes. This is especially problematic with "tac reloads". AG pouches solve this age-old problem and go from HALO jump-level retention to safety, magazine pulling, magazine re-indexing and back without ever taking your dominant hand off your weapon. We don't believe in taking both hands off your weapon during a firefight, because we come from an environment where time outside the target and outside the weapon when the bullets fly around can easily cost you your life. Sometimes you can't miss that time to intervene again, because by grabbing you have to look down or take your second hand off your weapon. AG pouches use a combination of specially developed polymer pull tabs and various reinforced materials that work together to provide the retention level of closed-top pouches, but the fast pulling ability, without hooks, of open-top pouches. Your equipment should allow you to focus on the threat – it shouldn't bother or annoy you. The custom-made polymer pull tabs allow for both mechanical and friction grip for a perfect grip, with or without gloves. We don't believe in normal just because we've always done something a certain way doesn't mean we can't rethink it and evolve it to provide small but crucial benefits that improve your performance, comfort and safety. Whether you're defending your country on the tip of the spear or defending your family, AG pouches give you a head start. Details- Suitable for three 5.56 warehouses
- Makes it possible to easily pull and insert the magazine with one hand
- A patented polymer pull tab for exceptional grip
- Reliable retention to never lose a warehouse
- Built-in MOLLE rear mounting
- Tested in battle in Israel
- Smart retention tab meets military requirements without obstructing the entrance to the pouch
- 500D CORDURA® Mil Spec Tactical Nylon
- Laser cut Velcro MOLLE overlay
- Takes 3 MOLLE slots down and 6 MOLLE slots transversely
- Weight: 0.35lbs (0.16kg)
- Suitable for three 5.56x45 AR or M4 rifle magazines
- Takes 3 MOLLE slots down and 6 MOLLE slots transversely
-
Agilite AG Mag Pouches are bungee retention pouches that allow you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way. Bungee retention may pouches have been in use for over a decade because of how well they hold warehouses. but they have an inherent, annoying flaw. They make the removal or return of a mag a clumsy, two-convenient, two-motion process because the magazine sticks to the bungeelusjes. This is especially problematic with "tac reloads". AG pouches solve this age-old problem and go from HALO jump-level retention to safety, magazine pulling, magazine re-indexing and back without ever taking your dominant hand off your weapon. We don't believe in taking both hands off your weapon during a firefight, because we come from an environment where time outside the target and outside the weapon when the bullets fly around can easily cost you your life. Sometimes you can't miss that time to intervene again, because by grabbing you have to look down or take your second hand off your weapon. AG pouches use a combination of specially developed polymer pull tabs and various reinforced materials that work together to provide the retention level of closed-top pouches, but the fast pulling ability, without hooks, of open-top pouches. Your equipment should allow you to focus on the threat – it shouldn't bother or annoy you. The custom-made polymer pull tabs allow for both mechanical and friction grip for a perfect grip, with or without gloves. We don't believe in normal just because we've always done something a certain way doesn't mean we can't rethink it and evolve it to provide small but crucial benefits that improve your performance, comfort and safety. Whether you're defending your country on the tip of the spear or defending your family, AG pouches give you a head start. Details- Fits one 5.56 warehouse
- Makes it possible to easily pull and insert the magazine with one hand
- A patented polymer pull tab for exceptional grip
- Reliable retention to never lose a warehouse
- Built-in MOLLE rear mounting
- Tested in battle in Israel
- Smart retention tab meets military requirements without obstructing the entrance to the pouch
- 500D CORDURA® Mil Spec Tactical Nylon
- Laser cut Velcro MOLLE overlay
- Takes 3 MOLLE slots down and 2 MOLLE slots transversely
- Weight: 0.14lbs (0.06g)
- Suitable for one 5.56x45 AR or M4 rifle magazine
- Takes 3 MOLLE slots down and 2 MOLLE slots transversely
-
The Agilite Pincer Pouch is a MOLLE backed fast-draw low profile elastic mag pouch for a single 5.56 magazine. The patented funnel-shaped magnetic hole design makes it possible to grab or re-index a magazine with one hand. Open warehouse bags are popular, but have inherent flaws. They are often clumsy, clumsy, noisy or impossible to re-index a warehouse with one hand. The Pincer Pouch is lightweight, low profile, quiet and allows you to re-insert a magazine without a hitch. The Pincer Pouch is incredibly versatile, with a laser cut rear MOLLE to fit perfectly on all battle belts and plate carriers. The Pincer Pouch also has a loop on the inside so you can add Agilite Jump Retention tabs if your unit's regulations require it. They feature Agilite's patented AG™ polymer pull tab technology, so even when used, they give you unhindered one-handed access to your warehouses. Whether you're defending your country at the point of the spear, defending your family, or defending your home, Pincer Pouches will give you an edge. Sizing- ONE-SIZE-FITS-ALL
- Fits a 5.56x45 AR or M4 rifle magazine.
- Fits in: A single 5.56 warehouse
- Weight: 3oz (83g)
- Dimensions: 14cm*9.5cm*3cm
- Patented durable polymer magwells
- Laser cut Squadron mil-spec laminate fabric
- Suitable for a 5.56 warehouse
- MOLLE support
- Can be connected to all battle belts and plate carriers
- Quick-draw mag pouch with rock-solid retention
- Patented magnet holder funnels magazines in the pouch, snag-free
- Low profile elastic bag with superior durability and retention
- Proven in Israel
-
Agilite Retractor ballistic side plate carriers allow you to add additional ballistic protection to your installation to give you extra vital organ protection when used in high threat environments. They can be connected to ANY MOLLE Cummerbund or other MOLLE platform, not just Agilite platforms, and are lightweight, wear-resistant and intelligently designed to be the only side plate carriers you will ever need. The unique Israeli design ensures that a standard Special Forces 6 "X6" plate fits perfectly, but also expands directly to fit a 6"X8" Infantry issued plate, just a sine if you have missions that require extra coverage or if that's all you have access to during a deployment. Designed, tested and manufactured in Israel, they fit into SAPI. ESAPI or other common ballistic side plates up to 1 inch thick. Retractor side plate carriers can also be used to hold non-ballistic training plates to prepare you for the front lines and make your Crossfit or other training session more serious and challenging. Note: Side plate carriers with retractor are non-ballistic and are not export restricted - they are only a carrier platform for ballistic side plates. Specs:- Mil Spec 1000d tactical nylon
- Includes Agilite polymer handle
- Made in Israel
-
The Gen4 is a next-generation helmet cover that fits like a glove, giving the helmet new advanced functionality and universal accessory management. The Gen 4 helmet cover provides color or camouflage uniformity, protects the painted ballistic surface of the helmet, and serves as a rock-solid platform that secures all accessories, preventing loss or damage. This super-high cut helmet cover protects the ballistic and painted surface of your Ops Core FAST SF/MT and extends its life and gives you full management of accessories. Features include cable channels on the left and right sides, smooth sides without hooks, and an upper bungee accessory management area for IR flashes, cameras, and more with mil-spec polymer holders with laser-engraved Agilite scorpions. Optional universal rear bag The case features an optional detachable universal rear bag that fits all common NVG batteries, counterweights and strategically placed output holes for all cables. The semi-rigid exterior of the pouch gives accessories on the back extra protection against bumps and has a central loop for ID patches. It also has a lower storage compartment for PTT communication cables when not in use. The rear bag integrates seamlessly with the OPS-CORE FAST SF or MT SUPER HIGH CUT HELMET cover, and is securely and securely connected and yet it can be put on and taken off in about 60 seconds, allowing you to plug in or disconnect depending on your mission set. The Agilite Gen4 Ops Core helmet cover is easy to apply or remove in seconds. It is made from durable mil-spec materials and is designed, tested and manufactured in Israel. • Fits the Ops Core FAST SF & Ops Core Ops Core FAST MT (also known as "Maritime" or "Super high cut") • Agilite precise fit • Optional universal rear cell fits all common batteries/counterweights • Patented rear pod provides impact protection for batteries. • Output openings for all common NVG Battery box cables/switches • Next-generation central bungee retention with lower profile for IR flashes, cameras, etc. • Integrated cable management channels • Full spectrum, rock-solid accessory platform • Easy installation - can be mounted on the helmet in seconds Specs • Weight: 5oz (143g) • 1000D tactical nylon • Flat polyester mesh 380g/m2 • Laser engraved polymer bungee channels • Rear loops for AA and CR123 NVG batteries • Made in Israel ! ATTENTION! REAR POUCH NOT INCLUDED ! Sizing This helmet cover fits the following helmets:Helmet | Helmet Size What Helmet Cover Size Do I Need? Ops-Core FAST SF Super High Cut Helmet Medium or S/M Medium Ops-Core FAST SF Super High Cut Helmet Large or M/L Large Ops-Core FAST SF Super High Cut Helmet XL or L/XL XL Ops-Core FAST MT Super High Cut Helmet Medium or S/M Medium Ops-Core FAST MT Super High Cut Helmet Large or M/L Large Ops-Core FAST MT Super High Cut Helmet XL or L/XL XL Ops-Core FAST Maritime Super High Cut Helmet Medium or S/M Medium Ops-Core FAST Maritime Super High Cut Helmet Large or M/L Large Ops-Core FAST Maritime Super High Cut Helmet XL or L/XL XL FMA Maritime M/L Medium FMA Maritime L/XL Large -
Not in stock - on order
The Agilite Gen4 MTEK Version is a new generation helmet cover that fits the MTEK FLUX helmet like a glove and offers it new, advanced functionality and universal accessory management. It uses a new versatile rear flex cell that fits all common NVG battery packs, counterweights and has strategically placed output holes for all cables. The semi-rigid exterior of the cell provides additional protection against impact rear accessories and has a central loop for ID patches. The Gen 4 helmet cover ensures uniformity in color or camo, protects the painted ballistic surface of the helmet and serves as a rock-solid platform that secures all accessories, preventing loss or damage. Details- Fits the MTEK FLUX Ballistic, MTEK FLUX Carbon
- Agilite precise fit
- Patented rear cell provides impact protection for battery packs.
- Output holes for all common NVG battery cables/switches
- New generation central bungee mount for IR flashes, cameras etc.
- Integrated cable management channels
- Full spectrum, rock-solid accessory platform
- Easy installation - can be mounted on the helmet in seconds
- Weight: 5oz (143g)
- 1000D Tactical Nylon
- Flat Polyester Mesh 380g/m2
- Laser-engraved polymer bungee channels
- Rear loops for AA and CR123 NVG batteries
- Made in Israel
-
The Agilite AG3 Placard is a bungee retention placard that allows you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way.- Suitable for three 5.56 magazines and can be attached to any plate holder with G-hooks or Placard buckles (both buckles and G-hooks included with the placard).
- Bungee retention warehouse bags have been used for more than a decade because they hold warehouses well, but they have an inherent, annoying flaw. They make removing or returning a warehouse inconvenient, with two hands and two movements, because the warehouse keeps hooking on the bungee tabs.
- AG pouches solve this age-old problem and go from HALO jump-level retention to safety off, mag draw, may re-index and back without ever taking your dominant hand off your weapon.
- The custom-polymer pull tabs also allow both mechanical and friction grip to get the perfect grip, with or without gloves.
- Whether you're defending your country at the tip of the spear or defending your family, AG pouches give you a head start.
- Fits three 5.56x45 AR or M4 rifle magazines.
- The AG3 Placard fits ANY plate carrier and is equipped with both G-hooks and MOLLE buckles.
- 500D CORDURA® Mil Spec Tactical Nylon |
- Laser cut Velcro MOLLE overlay
- Suitable for three 5.56 warehouses
- Height adjustable
- Weight: 0.16 kg
- Including mil-spec G-hooks
- Including mil-spec Polymer MOLLE Placard buckles
- Suitable for three 5.56 warehouses
- Makes it easy to pull or place a magazine with one hand
- Proprietary polymer pull tab for exceptional grip
- Reliable retention to never lose a warehouse
- With hook closure, to be attached to any plate carrier that Placard is capable.
- Proven in battle in Israel
- Smart retention lip meets military requirements without obstructing access to the bag
-
The Agilite Six pack is designed to be the best hanger bag on the market. Validated in months of real missions, our goal was to eliminate all problems with existing hangers. Most hangers are too long, flapping and dangling under your belt line and hindering your movement. The geometry of the Six pack has been optimized to have the same storage capacity, but to be much more compact and not get in the way. Plate carrier hanger pouches make sense because they sit in a very accessible place on your kit, but many have top zippers that make it difficult to see what's inside. The Six Pack pendant seamlessly integrates with the rest of your gear, giving you both quick one-handed access and a view of the contents of your pouch. Many drop pouches also have external turnstile sleeves where the turnstile can fall out unless the pouch is full. The Six Pack has a built-in flap that holds the turnstile even when the bag isn't full, and has a protective cordura exterior. It also has designated spots for chemlights, markers and other essential items. The flap can be executed completely smooth just as easily, if you prefer. On the inside, you have more versatility than regular dangling bags, because you have internal elastic and a loop for attaching inserts with Velcro. It comes with an optional fanny pack conversion kit, so you can convert it in seconds for everyday use. For the organization you have 2 separate zip pockets with different tactile zipper heads, so you can distinguish them by feel, without having to look down. Operating in high-threat environments, our customers need to keep their eyes on the target and not have to constantly mess with their gear. Whether you're defending your country at the cutting edge, defending your community, or defending your home, the Six Pack gives you an edge. Details- Gives you extra, easily accessible storage space under your plate holder
- Ergonomic shape is not too low so that it does not hinder your movements
- Multiple internal and external fastening methods
- Large capacity but more compact than traditional pendant bags
- Built to make the contents of the pouch visible
- Integrated lower flap gives quick access and protection to turnstiles
- Can be converted into a fanny pack in seconds using a conversion belt (not included)
- Proven in battle in Israel
- 500D CORDURA® Mil Spec Tactical Nylon.
- Milspec Webing
- YKK Zippers
- Drain hole
- Dimensions: 9.6" x4.3" x2.7"
- Weight: 154.5g
- Storage capacity: 1.8 litres
- One size fits all
- Can be attached via the loop of the front plate carrier or via the cover of the front plate bag
-
The Agilite Gen4 is a new generation helmet cover that fits like a glove and gives the helmet new cutting edge functionality and universal accessory management. The Gen 4 Ops-Core helmet cover provides color or camo uniformity, protects the helmet painted ballistic surface and serves as a rock solid platform that secures all accessories, preventing loss or damage. This high cut helmet cover protects the ballistics and painted surface of your Ops Core FAST ST/XP and extends its life as well as gives you full accessory management. Features include left and right cable management channels, smooth, snag-free sides and an upper bungee accessory management area for IR flashes, cameras and more that mil-spec polymer holders with laser-engraved Agilite scorpion features. Optional universal back pocket The Helmet Cover features an optional detachable universal back pocket that fits all common NVG batteries, counterweights and has strategically placed output holes for all cables. The semi-rigid pouch exterior gives rear accessories extra protection against bumps and has a central loop area for ID patches. The bag also has a lower storage compartment for communication PTT cables when not in use. The back pouch integrates seamlessly with the OPS-CORE FAST ST/XP HIGH CUT HELMET cover, and is securely and securely connected and yet, it can be put on and off in about 60 seconds, allowing you to plug in or unplug depending on your mission set. The Agilite Gen4 Ops Core helmet cover is easy to apply or remove in seconds. It is made from durable mil-spec materials and is designed, battle-tested and produced in Israel.- This Ops-Core Helmet Cover fits the OPS-CORE FAST Ballistic ST and the OPS-CORE FAST Ballistic XP
- Agilite precise fit
- Optional universal rear cell fits all common Battery Packs/Counterweights
- The patented rear cell provides impact protection for battery packs.
- Output holes for all common NVG Battery box cables/switches
- Central bungee retention for IR flashes, cameras etc.
- Integrated cable management channels
- Full spectrum, rock-solid accessories platform
- Easy installation - can be mounted on the helmet in seconds
- Weight: 5oz (143g)
- 1000D Tactical Nylon
- Polyester mesh 380g/m2
- Laser-engraved polymer bungee channels
- Rear loops for AA and CR123 NVG Batteries
- Made in Israel
Helmet | Helmet Size What Helmet Cover Size Do I Need? Ops-Core FAST XP High Cut Ballistic Helmet Medium or S/M Medium Ops-Core FAST XP High Cut Ballistic Helmet Large or M/L Large Ops-Core FAST XP High Cut Ballistic Helmet XL or L/XL XL Ops-Core FAST ST High Cut Ballistic Helmet Medium or S/M Medium Ops-Core FAST ST High Cut Ballistic Helmet Large or M/L Large Ops-Core FAST ST High Cut Ballistic Helmet XL or L/XL XL FMA Ballistic High Cut XP Helmet Medium or S/M Large FMA Ballistic High Cut XP Helmet Large or M/L XL -
The Agilite SF Balaclava is worn by Israeli and other special operators who have to hide their identity even during operations in the fierce Middle East heat and extreme physical exertion. It's made from our ultra-thin Combat Cool™ moisture-wicking fabric so it doesn't interfere with breathing or talking through communication. ` The SF Balaclava has a versatile positioning for coverage of the whole face, half the face or just the neck, depending on your mission. The patented Combat Cool™ fabric uses advanced moisture-regulating technology to lower body temperature and prevent fatigue. It has also been treated antibacterially to prevent microbe-induced odors. One size fits everyone. Details:- Combat Cool™ moisture wicking technology
- Antibacterial Treated to prevent microbe-induced odors
- Used by Israeli military special operators for hiding and protecting the face
- Versatile positioning for coverage of the whole face, half face and only the neck, depending on the needs of your mission
- Extends below the neckline for extended coverage
- Ultra-thin material for use with Comms and maximum breathability
-
The semi-rigid exterior of the pouch provides additional impact protection for rear accessories and has a central loop for ID patches. It also has a lower storage compartment for PTT cables when not in use. It's securely and securely connected and yet can be put on and off in about 60 seconds, so you can connect or unplug depending on your mission set.- Includes Rear pod + extended bungee cord
- The rear pocket integrates seamlessly with the Mohawk, Mohawk Air and Gen4 Lo-Pro helmet covers.
- Provides mission-specific customizability.
- Securely attached to the helmet with Velcro, Velcro under tabs and milspec bungee cord.
- Provides new advanced functionality and universal accessory management.
- Uses a new versatile rear flex cell that fits all common NVG battery packs and counterweights.
- Has strategically placed outputs for all cables.
- The semi-rigid exterior of the cell provides the rear accessories with additional protection against impact and has a central loop for ID patches.