-
Not in stock - on order
Our Laser Cut Compact Dump Pouch can be attached to the belt or to any Warrior Series carrier. Made from a combination of Mil-Spec elastic and nylon for an ultra-compact design. To open, simply release the outer Hypalon safety tab, then pull the inner tab to fully open the bag. To repack, place the bag section back into the pocket and reattach the safety tab. This is attached with 2 MOLLE arms. Made from our high-quality composite laminate material and fabricated using our advanced laser cutting machines. Dimensions & Weight Length: 13 cm Width: 8.5 cm Height: 4 cm Weight: 0.083 kg -
Warrior's Large Admin Panel is ideal to keep important paper/personal IDs safe. It has two pockets covered with a Velcro flap, a 9 mm pistol magazine and Velcro at the front for attaching a wide range of patches, eg blood type nationality flags etc. The large control panel takes up 4 rows of MOLLE on any compatible luggage carrier or bag. -
The Warrior Assault System Standard Grab Bag can be used as an E&E bag and has the following details: Main compartment with zipper and 3 dividers and Velcro opening for the cable channel: 1. Shallow compartment with 3 wide rubber belt loops, 2. Wide middle compartment with pocket for mobile phone or radio and loops for rubber straps for pens or glowsticks, 3. Shallow outer compartment with fully fleece-lined walls, including pistol holster with Velcro and single magazine pocket. The main compartment is well protected by a detachable lid with transparent card compartment (27x36 cm), this is secured with a Fastex closure.- The external Molle section is equipped with 3 modular M4 warehouse bags,
- side pocket for mobile phone with Velcro closure
- on the other side is a modular 9mm double magazine bag,
- on the back there is a pocket for the hose with Velcro where the hip belt can be stored,
- adjustable shoulder strap with Velcro and modular pocket for tools or magazines.
-
Not in stock - on order
Double 5.56mm Magazine from Warrior. Suitable for M4 and SA80 magazines. The Double 5.56mm Open occupies 4 horizontal rows of MOLLE on compatible carry straps and bags. -
EMP pouches are designed to enable an unobtrusive solution that provides retention with the benefit of quick access for quick reloading. Designed for M4- and AK-style metal and P-Mags and offered in single dual and triple configurations to meet your operational requirements. -
The Warrior Assault System Triple 9mm Direct Action Mag Pouch can be used with or without the magazine protection, the internal plastic material combined with the elastic band on the side prevents the magazines from falling out. The magazine catcher can be opened with Velcro and Velcro. Suitable for calibers 9mm, .40 and .45 double row pistol magazines. Material- 100% polyamide (500D Cordura® Performance)
- US MIL-Spec webbing (with a tear strength of 1200 pounds)
- US MIL-Spec stitching, treated against mold.
- magazine holders with Velcro closure, can be folded forward when not in use.
- Elastic sides.
- PALS mounting loops for MOLLE system (25 mm).
- Water drainage eyes at the bottom.
- Dimensions: approx. 12.5 x 2.5 x 11 cm.
- Weight: approx. 150 g.
-
Warriors Elite Ops Single 9 mm Direct Action Mag Pouch is compact and allows the cover to roll down and secure with Velcro to allow quick access to chargers. The bag can contain 1 horizontal row of MOLLE on any compatible carrying belt or bag. -
The Warrior Assault System Double 9mm Direct Action Mag Pouch can be used with and without a magazine lock, the plastic material on the inside in combination with the elastic band on the side prevents the warehouses from falling out, the warehouse safety can be opened with Velcro and fleece tape.- Dimensions: approx. 10 x 2.5 x 11 cm (LxBxH),
- Weight about 120 grams.
-
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The shoulders are fully adjustable and have an emergency release on one side which frees the left shoulder area and allows the operator to remove the rig without having to remove the operator's helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). -
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for special forces requirements, PSD operations as well as Police Tactical Operations/SWAT. The shoulders are fully adjustable and have an emergency release on one side, freeing the left shoulder area and allowing the operator to remove the rig without having to remove his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). The DCS DA 5.56 mm (Direct Action) comes standard with 5 x Open Mags for 5.56 mm Magazines and 2 x Small Utility/Medic Pouch. -
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The Dynamic Combat System (DCS) is a lightweight, unobtrusive system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The DCS can contain large plates at the front and back and has the option to wear side plates "6 x 6" or "6 x 8". NEXUS N.I.J. Level 3a Front, Back and Side Armor can also be used with I.C.W. style plates and for additional protection against I.E.D.s armor carrier, with detachable sides. The shoulders are fully adjustable and have an emergency release on one side, which frees the left shoulder area and allows the operator to remove the rig without taking off his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D Spacer Mesh lining is used for comfort and allows body heat away from the body surface while helping with airflow to cool. The DCS is designed to be worn in conjunction with the Warrior Frag Belt (sold separately). -
- The Warrior Assault Cargo Pack is a small backpack that can be attached to a ballistic vest or worn with the detachable shoulder straps, emergency shoulder straps,
- integrated 3-litre blowing compartment (bladder not included),
- large main compartment with zipper,
- small patched zip pocket with subdivision,
- Compression straps,
- 4 loops of Molleband each on 2 levels to attach additional bags,
- 2 Velcro closures for the drinks hose.
- Dimensions: approx. 18 x 18 x 38.5 cm (LxBxH),
- Weight: about 730 grams.
- Made from water-repellent 1000D Cordura, all tires according to US Mil Spec, the materials used have the lowest infrared values (99.8%) and are produced according to military specifications.
-
Designed for 1 x 0.338 Lapua 8.6 mm x 70 mm mag for the L115A1 / 3 AW and AWM. This Warrior case also comes with black PosiGrip lining. It can also contain 1 x .300 Win Mag (7.62 mm x 67 mm) Mag bag or 1 x standard 7.62 mm x 51 mm. The .338 single mag takes 3 horizontal rows of MOLLE on compatible carrier rigs and bags. -
Vortex Red Dot Rifle Scope Spitfire HD Gen II 5x
The updated Vortex Red Dot Rifle Scope Spitfire HD Gen II 5x offers ultra-fast playback even without lighting. The prism design and etched reticle solve the distortion problems for users plagued by astigmatism. The optics provide better sharpness and reduce chromatic aberration. In addition, the renewed Spitfire HD Gen II 5x with the layer of built-in turrets has a streamlined appearance and is lighter in weight and optically smaller. With the new mounting system, you are no longer limited to one mounting height.Application Vortex Red Dot Rifle Scope Spitfire HD Gen II 5x
The Vortex Red Dot Rifle Scope Spitfire HD Gen II 5x can be used on the shooting range but also works perfectly for hunting at the medium distance. It features new AR-BDC4 reticle design with bright red illumination for quick fixation at known distances. The Vortex Spitfire HD Gen II is also equipped with two night vision settings and the Red Dot can also be used when there is hardly any ambient light.Properties of the lenses
- HD Optical System; Optimized with selected glass elements for exceptional resolution, reduced chance of chromatic aberration, excellent color fidelity and optimal light transmission. The Spitffire HD is sharp from edge to edge.
- Fully multi-coated: Increase light transmission with multiple anti-reflective coatings on all air glass surfaces.
Housing features
- Ultra compact and lightweight design; Robust construction that is still compact and lightweight.
- Waterproof O-ring seals prevent moisture, dust and dirt from entering. This way you are guaranteed reliable performance in all circumstances.
- Shockproof, the robust construction is resistant to bumps and even drops.
- Fog-free Argon gas cleaning prevents internal fogging of the binoculars over a wide temperature range.
- Matte black low gloss finish; Corrosion and wear-resistant anodization creates a matte surface with little glare and helps camouflage the shooter's position.
Features of the reticle
- AR-BDC4 Reticle; Purpose-built for the most popular 5.56 patterns.
- Illuminated reticle; 12 brightness levels improve low-light accuracy.
- Night vision compatible; make it possible to aim accurately even in the dark.
Spitfire 5x SPR-500 Enlargement 
5x Ø Objective in mm 25 Reticle AR-BDC4 Reticle color Red Field of view at 100m in m 7,7 Eye distance in mm 69 Battery Type CR2032 Length in mm 92 Weight in grams Incl. battery and mounting 306 Lifetime warranty
VIP stands for a Very Important Promise to you, our customer. We will repair your Vortex® product in case it fails. If we are unable to repair your product, we will replace it with a product that is in perfect working condition and in an equal or better physical condition. The VIP warranty does not cover loss, theft, intentional damage or cosmetic damage that does not interfere with the performance of the product.Delivery:
- 1x Vortex Red Dot Rifle Scope Spitfire HD Gen II 5x
- 1x Rubber Lens Covers
- 1x Multi-Height Mount System - Lower 1/3 Co-Witness Height & Low Mount Height
- 1x Lens Cloth
- 1x CR2032 Battery
-
Vortex Red Dot Rifle Scope Spitfire HD Gen II 3x
The updated Vortex Red Dot Rifle Scope Spitfire HD Gen II 3x offers ultra-fast playback even without lighting. The prism design and etched reticle solve the distortion problems for users plagued by astigmatism. The optics provide better sharpness and reduce chromatic aberration. In addition, the renewed Spitfire HD Gen II 3x with the layer of built-in turrets has a streamlined appearance and is lighter in weight and optically smaller. With the new mounting system, you are no longer limited to one mounting height.Application Vortex Red Dot Rifle Scope Spitfire HD Gen II 3x
The Vortex Red Dot Rifle Scope Spitfire HD Gen II 3x can be used on the shooting range but also works perfectly for hunting at the medium distance. It features new AR-BDC4 reticle design with bright red illumination for quick fixation at known distances. The Vortex Spitfire HD Gen II is also equipped with two night vision settings and the Red Dot can also be used when there is hardly any ambient light.Properties of the lenses
- HD Optical System; Optimized with selected glass elements for exceptional resolution, reduced chance of chromatic aberration, excellent color fidelity and optimal light transmission. The Spitffire HD is sharp from edge to edge.
- Fully Multi-Coated; For increased light transmission with multiple anti-reflective coatings on all air/glass surfaces.
Housing features
- Ultra compact and lightweight design; Robust construction that is still compact and lightweight.
- Waterproof O-ring seals prevent moisture, dust and dirt from entering. This way you are guaranteed reliable performance in all circumstances.
- Shockproof, the robust construction is resistant to bumps and even drops.
- Fog-free Argon gas cleaning prevents internal fogging of the binoculars over a wide temperature range.
- Matte black low gloss finish; Corrosion and wear-resistant anodization creates a matte surface with little glare and helps camouflage the shooter's position.
Features of the reticle
- AR-BDC4 Reticle; Purpose-built for the most popular 5.56 patterns.
- Illuminated reticle; 12 brightness levels improve low-light accuracy.
- Night vision compatible; make it possible to aim accurately even in the dark.
Spitfire 3x SPR-300 Enlargement 3x Ø Objective in mm 21 Reticle AR-BDC4 Reticle color Red Field of view at 100m in m 12,6 Eye distance in mm 67 Battery Type CR2032 Length in mm 76 Weight in grams Incl. battery and mounting 263 Lifetime warranty
VIP stands for a Very Important Promise to you, our customer. We will repair your Vortex® product in case it fails. If we are unable to repair your product, we will replace it with a product that is in perfect working condition and in an equal or better physical condition. The VIP warranty does not cover loss, theft, intentional damage or cosmetic damage that does not interfere with the performance of the product.Delivery:
- 1x Vortex Red Dot Rifle Scope Spitfire HD Gen II 3x
- 1x Rubber Lens Covers
- 1x Multi-Height Mount System - Lower 1/3 Co-Witness Height & Low Mount Height
- 1x Lens Cloth
- 1x CR2032 Battery
-
The SPARC AR2 has a robust construction which is compact and lightweight. The 2 MOA dot is as easy to aim as it is to shoot - it's easy to spot and fine enough for exact accuracy. The battery has a lifespan of 50,000 hours and is visible even at night at the two lowest intensities. With the included mountings, the SPARC AR2 can be mounted at various heights on a picatinny /weaver rail. Application Vortex Red Dot SPARC AR2 For anyone who wants reliable performance in any environment combined with easy operation, the Vortex Red Dot SPARC AR2 is the Red Dot of choice. Optical properties- Fully Multi-Coated; Increases light transmission with multiple anti-reflective coatings on all air/glass surfaces.
- Brightness Levels; 12 levels.
- Unlimited Eye-relief; for fast target tracking.
- Parallax Free; Ensures that you do not have to keep your eye in the same place to be able to see through it properly and focus on your target.
- Night-Vision Compatible; The lowest two intensities are suitable for use at night.
- One-piece frame; Compact and lightweight.
- Waterproof; O-ring seals prevent the ingress of moisture, dust and dirt for reliable performance in all conditions.
- Shockproof; The robust construction is resistant to recoil and bumps.
- Matt anodized finish; Corrosion and wear-resistant anodization provide a matte glossy surface and help camouflage the shooter's position.
- The Red Dot is easy to see and finds the target with simplicity, regardless of the lighting conditions or background.
- Article number: 42300010
- Brand: Vortex
- Weight: 213 grams
- Lens diameter: 22 mm
- Magnification: 1x
- Dot size: 2 MOA
- Dot color: Bright Red
- Intensity levels dot: 12
- Max. Width adjustment: 90 MOA
- Max. Height adjustment: 90 MOA
- Click value at 100m (in mm): 1 MOA
- Parallax Setting: Parallax free
- Warranty: Lifetime
Delivery:
- 1x Red Dot SPARC AR2
- 1x Rubber housing with Flip Cap
- 1x Standard mounting
- 1x Low 1/3 mounting
- 1x T-10 Torx key
- 1x AAA battery
- 1x Lens cloth
- 1x Manual (English)
-
Not in stock - on order
The Vortex Red Dot Rifle Scope Venom is a visor built for extremely high performance and incredible versatility. The body is made of aluminum that is also used for aircraft and consists of one part. This makes the rifle scope very strong and can handle heavy recoil very well. The XR full multi-coated lenses improve light transmission for maximum light and clear images. The ArmorTek coating on the lenses ensures that they are protected against scratches and dirt. The nitrogen filling and O-ring seal ensure a complete water, mist and dust resistance. The lightweight Red Dot is full of beautiful features and lends itself to many weapons such as automatic rifles, pistols and rifles. The mounting fits on a standard picatinny rail.Features of the Vortex Red Dot Rifle Scope Venom:
- XR full multi-coated lenses
- ArmorTek coating on the lenses
- Tube in one part
- Mist-free, water- and dust-proof
- Shock-free
- Parallax free
- Bright Red Dot (extremely visible in daylight)
Lifetime warranty
Vortex unconditionally guarantees a well-functioning product, for life. You can count on the best quality products, with a very detailed finish. In the unlikely event that a defect occurs, you are covered by the VIP guarantee.Delivery:
- 1x Vortex Red Dot Rifle Scope Venom Top Load 3 MOA
- 1x Picatinny mount
- 1x T-15 Torx key
- 1x CR1632 battery
Specifications:
- Article number: 42300040
- Brand: Vortex
- Tube length: 4.8 cm
- Weight: 31 g
- Magnification: 1x
- Dot size: 3 MOA
- Dot color: Bright Red
- Max. Width adjustment: 100 MOA
- Max. Height adjustment: 130 MOA
- Parallax Setting: Parallax free
- Warranty: Lifetime
-
Vortex Diamondback Tactical 6-24x50 FFP Rifle Scope, EBR-2C Reticle (MRAD)
The Vortex Diamondback Tactical 6-24x50 Rifle Scope is specially designed for demanding hunters and shooters. Vortex built these viewers to meet the needs of tactical professionals, but with a high user-friendliness and therefore also very suitable for hunters. These rifle scopes offer the highest levels of performance and reliability. The Vortex Diamondback Tactical 6-24x50 Rifle Scope is built from a 30 mm aluminum tube of the highest quality. The rifle scope is made of one piece of aluminum which is also used in aircraft construction. Optically, the Tactical rifle scopes have impressive image quality, the XD™ lens elements are of high quality and offer an incredible resolution and crystal clear image. The lenses are XR™ fully coated which increases the light transition for optimal brightness. This rifle scope has a lens of 50 mm and therefore also has a high light output.Application Vortex Diamondback Tactical 6-24x50 FFP Rifle Scope
The Vortex Tactical Diamondback 6-24x50 Rifle Scope is ideal for hunting big game, but also for shooting pests and long range shooting (on the shooting range). With the 6-24x magnification you reach the target close to be able to shoot as targeted as possible. This rifle scope is a First Focal Plane rifle scope, this means that the reticle also zooms in. So the reticle gets bigger when you zoom in and smaller when you zoom out again. This is different with a rifle scope with Second Focal Plane, with these rifle scopes the reticle remains the same size when you zoom in. The reticle used in the Tactical Rifle Scope is an EBR-2C MRAD reticle, which offers extensive possibilities to make the right corrections during shooting.Lifetime Warranty
Vortex unconditionally guarantees a good working product for life. You can count on the best quality products, with a very detailed finish. In the unlikely event that a defect occurs, you are covered by the VIP guarantee.Features of the Vortex Diamondback Tactical 6-24x50 FFP Rifle Scope are:
- XD extra low dispertion glass
- XR full multi-coated lenses
- First Focal Plane Reticle
- Tube construction in one part
- Precision Glide Erector system for a smooth zoom mechanism
- Fast focus eyepiece
- Reset turrets, re-indexing the "zero" on the turrets without using tools
- Mist-free, water- and dust-proof
- Highly shockproof
Delivery:
- 1x Vortex Diamondback Tactical 6-24x50 Rifle Scope
- 1x Lens cover
- 1x Lens hood
- 1x Lens cloth
- 1x Manual (English)
- 1x Full-color packaging
Specifications
- Article number: 42234248
- Brand: Vortex
- Magnification: 6-24x
- Eye relief (eye distance): 9.9 cm
- Field of view at 100m: 5.49-1.37m
- Tube thickness: 30 mm
- Lens coating: Full multicoating
- Weight: 697 g
- Color: Black
- Mounting length (mm): 368 mm
- Gas filled: Yes
- Mounting included: No
- Reticle type: EBR-2C
- Reticle Lighting: No
- Parallax setting: 9.1 m (10 yards) to infinity
- Max. Width Adjustment: 19 MRAD
- Max. Height adjustment: 19 MRAD
- Click value at 100m (in mm): 0.1
- MRADFocal Plane: First Focal Plane (FFP)
- Warranty: Lifetime
-
This is a versatile and very practical universal turnstile holder. In addition to the turnstile, you can bring Gesco scissors and a marker. On the front, the Velcro fastener allows you to attach other identification patches, while hiding the bright red embroidered TQ for added discretion. Features- Universal holder
- Gesco scissor slot
- 2 elastic loops for 1 highlighter
- Patch lock with red embroidered TQ
- 2 Velcro fasteners to keep it in place
- Small mounting loop on top
- MOLLE mounting tab with snap button
- Vertical loop on the back
- 100% nylon
- Weight: 46 g
-
Equip yourself with the 2" tactical belt set with its 1.5" self-grasping bottom strap, it allows you to take off your gear and without taking everything off or putting it back on, quickly and easily. It's stiff enough for maximum comfort and stability with plenty of equipment. It has a secure metal quick release and numerous MOLLE loops all around. Features- Combat belt for equipment
- Inner/outer tyre combination
- High density nylon hook and loop bottom strap
- Metal buckle with quick release
- MOLLE buckles for carrying extra equipment
- Belt height: 5 cm
- Lower belt height: 3.8 cm.
- 100% Nylon
- Total weight: 375 g (size XS/S)
- available sizes: XS/S and M/L
- Available colors: Black and coyote
-
The F7 tactical LED light has been developed specifically for the needs of law enforcement agencies. This lamp has up to 4 white lighting modes and 4 different light intensities (1600 lumens, 600 lumens, 250 lumens and 10 lumens). The lamp can be used for a wide range of tasks, including nighttime roadside checks, professional interventions, remote person identification, and forensic and technical operations. The lamp is switched on by pressing the main switch on the back of the lamp. In the event of an emergency, to blind an attacker, the 1000 lumens high-intensity strobe light mode can be activated. If necessary, the F7 tactical lamp can be used to emit a distress signal in Morse code. TECHNICAL SPECIFICATIONS- White LED
- Battery Charge Indicator: Green +50% / Solid Red 50% to 30% / Flashing Red -30
- Turbo high intensity*: 1600 l / 2.25 h
- High intensity: 600 l / 4.5 h
- Medium intensity: 250 l / 6.5 h
- Low intensity: 10 l / 200 h
- Stroboscopic and SOS: 1000 l / 2.5 h
- Power supply: Rechargeable lithium battery (included) or 2 CR 123 lithium batteries
- Aluminium
- Rechargeable via USB-C
- 2 year warranty with normal use
- High-intensity lighting is the first in the cycle of available modes, so it can detect or blind a person at long range if law enforcement needs to respond and use their light in an emergency situation.
- Press the main switch. When the button is pressed lightly, the lamp turns on and off briefly when the button is released.
- To lock the light continuously, press the button until it clicks into place.
- The lamp will stay on, even if you let go of the button.
- To turn off the light, press the button again until it clicks into place.
- Once the lamp is turned on Turbo very high intensity, short press the footswitch next to the central button to access the other intensities.
- Each time you press the footswitch, you will activate the 600 lumens high-intensity mode, then the 250-lumen medium-intensity mode, then the 10-lumen low-intensity mode.
- Release the button when you're in the desired lighting mode.
- To do this, activate the lamp in continuous lighting mode, then press the pedal on the side of the main contact button for 2 seconds in a row.
- The strobe mode will be activated as described above, but after the two seconds of consecutive pressing, you can release the button and the lamp will keep its strobe illumination with the Morse SOS code.
- To turn off the lamp, short press the foot pedal to return to the previously selected continuous lighting mode, or directly press the main ignition button to turn off the lamp.
- F7 Tactical Flashlight
- 2600mAh Rechargeable Battery (1)
- Battery charger (USB cable, AC adapter)
- Cigarette Lighter Adapter
- Black Cordura Nylon Belt Pouch
- Spare belt and O-rings
-
The compact and minimalist Vigilant Chest Rig allows the wearer to carry the equipment needed to enter the field. It can be worn directly on the combat suit using the H-bands or directly on the plategilet, it has 2 T-adapters to fit into the MOLLE loops of the waistcoat. It can hold 4 AR long gun magazines (FAMAS, AR15, HK 416, G36, AR10 and AK 47) and 2 PA handgun magazines. It has a multi-pen admin compartment, a combat notebook, and a sturdy phone. There is also a small zippered pocket for a grenade. The abdominal pocket is attached to the chest with a Velcro strap and can be used for abdominal protection or as a MEDIC, EOD or other bag. Two Cyalume glowsticks can be worn on the sides of the box. This compact and versatile Chest Rig is suitable for indoor, outdoor and training missions. It allows you to make the same gesture to grab these immediate tools, regardless of your configuration (in plainclothes or equipped with your plategilet). Features- Compact, minimalistic and very versatile chest gutter
- Compatible with regular (H-bands) or MOLLE-waistcoat (T-adapters)
- Detachable H-shaped adjustable shoulder straps with female clips and equipped with a hook and loop square on the back for the identification of the back.
- Middle part with plate width (SAPI) with 4 male clamps
- The velcro middle section is compatible with sheet holders with a Velcro surface.
- 2 Female clips with T-adapters for the MOLLE loops of a plate holder combat gister
- 4 rear magazine slots with elastic fastening straps
- 2 pockets for PA magazines, knife or lamp with Velcro closure
- 1 carrying case with two-way zipper (suitable for grenades)
- 1 administrative bag with a transparent panel for reading route sketches or vital reminders, inside it has elastics for various pens, knives, combat notebook and phone
- 2 elastic bands on each side of the chest for wearing 2 glowsticks.
- Zipper with pull tabs for gloved hands
- Place 3 patch on the front of the pockets for identification
- Made of nylon with waterproof inside
- Available colors: Black and coyote
-
Lightweight 40-liter carrying case, ideal for business trips or to the gym. The bag can be carried by hand or over the shoulder with the detachable shoulder strap. The bag has a compartment to keep shoes, sneakers, food or dirty laundry separate from the rest of the contents of the bag. Features- Lightweight carrying case
- Main Compartment
- 2 side pockets
- Zippered shoe compartment
- Handles with Velcro fastener
- Removable shoulder strap
- Administrative pocket on the front
- Semi-rigid panel at the bottom of the bag
- Anti-abrasion pads under the bag
- 100% nylon
- Dimensions: 51 x 30 x 25 cm
- Total volume : 40 liters
- Weight : 1 kg
- Color : Coyote (CB) and Black
-
This Venatorix cap is an indispensable gadget in hunting. Especially for those who sit down in the evening, this cap can be essential, when searching or grazing. With 1 press of the button you activate the five-part LED lighting on the cap. A big plus also remains that the cap is waterproof.- Waterproof
- 5 LEDs
- Technological camo pattern
-
Nylon backpack, internal padding, back reinforcement, aluminum rod. Hidden back pocket. Locking straps on the sides and upper part. Padded shoulder and lower back straps. High capacity bag. Medium capacity bag. Modular system on sides and on front flap. Can be used with drinking system. Lower mounting system for use during airdrop. Reinforced handle. Side pockets and large flap at the front to wear helmet/kit. Size: cm 22 x 30 x h 50 -
Padded gun case. An external large zip pocket. External molle system. Double carrying handles. Two inner pockets. Dimensions: 32x23x7 cm -
Lower strap suitable for police, military or tactical use, in nylon. Inside padded and thermoformed for more ventilation and comfort. Easy attachment with adjustable Velcro loops. -
Lead the way in the XTU Rapid Long Sleeve Shirt. We have partnered with top teams from all over the world to develop the XTU line of tactical apparel. XTU shirts and pants are designed and made to equip operators with the most functional, robust, and comfortable uniforms available. The hybrid construction of the XTU Rapid Long Sleeve Shirt offers versatility and speed. The No Melt No Drip stretch fabric construction keeps you moving and cool under pressure. The shoulders and sleeves of this shirt are made of 58 percent cotton and 39 percent nylon Cordura® with elastane ripstop for a long life under heavy loads. A Teflon™ coating on the shoulders and sleeves protects against spills and stains. The lower body is made of 60 percent cotton and 40 percent Nylon 66 Cordura® jersey reinforced with a sweat-wicking, deodorizing finish. The knit fabric, gussets under the arms, adjustable cuffs and quarter-zip design help you maintain comfort in fast-changing conditions. Flat seams prevent chafing, while reinforced elbows and stitching at stress points resist frontline wear. Double sleeve pockets with loop patches at the biceps provide carrying options for electronics and more. The XTU Rapid Long Sleeve Shirt will help you stay in the fight.- NO melt, NO drip fabrics
- 1/4 center front zipper
- - Double top sleeve pockets with pen slots and loop patch platform
- Adjustable cuffs
- Gusseted construction with knit fabric for breathability
- Reinforced elbows
- Flat lock seams for comfort
- Bar tacking at key stress points
- Upper shoulders and sleeves: 58% cotton/ 39% nylon Cordura/ 3% elastane ripstop, 5.7 oz., Teflon™ finish
- Lower body: 60% cotton/ 40% Nylon66 Cordura single jersey, 5.0-oz., wicking and odor-odor finish
-
Lead the way in the XTU Rapid Long Sleeve Shirt. We have partnered with top teams from all over the world to develop the XTU line of tactical apparel. XTU shirts and pants are designed and made to equip operators with the most functional, robust, and comfortable uniforms available. The hybrid construction of the XTU Rapid Long Sleeve Shirt offers versatility and speed. The No Melt No Drip stretch fabric construction keeps you moving and cool under pressure. The shoulders and sleeves of this shirt are made of 58 percent cotton and 39 percent nylon Cordura® with elastane ripstop for a long life under heavy loads. A Teflon™ coating on the shoulders and sleeves protects against spills and stains. The lower body is made of 60 percent cotton and 40 percent Nylon 66 Cordura® jersey reinforced with a sweat-wicking, deodorizing finish. The knit fabric, gussets under the arms, adjustable cuffs and quarter-zip design help you maintain comfort in fast-changing conditions. Flat seams prevent chafing, while reinforced elbows and stitching at stress points resist frontline wear. Double sleeve pockets with loop patches at the biceps provide carrying options for electronics and more. The XTU Rapid Long Sleeve Shirt will help you stay in the fight.- NO melt, NO drip fabrics
- 1/4 center front zipper
- - Double top sleeve pockets with pen slots and loop patch platform
- Adjustable cuffs
- Gusseted construction with knit fabric for breathability
- Reinforced elbows
- Flat lock seams for comfort
- Bar tacking at key stress points
- Upper shoulders and sleeves: 58% cotton/ 39% nylon Cordura/ 3% elastane ripstop, 5.7 oz., Teflon™ finish
- Lower body: 60% cotton/ 40% Nylon66 Cordura single jersey, 5.0-oz., wicking and odor-odor finish
-
Not in stock - on order
UTG Metal Foregrip Low Profile Quick Detach Lever Mount. Solid and convenient vertical grip for mounting on a Picatinny/Weaver rail. Equipped with a QD lever for fast and solid assembly.- Unique jagged surface for the most solid grip
- Smart posi-lock cross bolt and spring-stretched lock plate with steel insert for the most secure installation
- Fully adjustable fast detachable lever that fits on any Picatinny/Weaver rail
- Smart hood with waterproof O-ring for hassle-free storage
- Precision manufactured from aircraft-quality aluminum
- Optimal low profile and reduced weight for extra comfort and control
- Manufacturer: UTG
- Metal Foregrip Low Profile 4.1"
- Item Number: MNT-GRP001SQ
- Height: 10.4 inches / 4.1 inches
-
Not in stock - on order
UTG 14 3/4" X 52", 3mm Thick Universal Weapon Cleaning Mat, Polyester Surface with Rubberized and Textured Anti-Slip Back, Durable Edge Seam, Easy to Maintain, Includes 4" Wide Hidden Bag for Cleaning Tools, Roll and Bind with Included Strap for Easy Carrying & Convenient Storage - Black.- UTG 14.75" x 52", 3mm Thick Universal Firearm Cleaning Mat, Roll and Tie up with Side Straps for Easy Carry and Suitable Storage.
- Large surface area adjusts cleaning multiple firearms simultaneously, Anti-slip Rubber-coated Support for Safe Placement on Flat Surfaces Perfect maintenance accessory for all firearms, from pocket pistols to 50 caliber rifles.
- Durable construction with resistance to solvents and chemicals for long-lasting performance.
- Includes a 4" wide zippered side pocket for organizing small parts and tools during cleaning.
-
Uphillsport Recon is designed for high performance requirements. Overnight stays can range from hot to freezing cold. Recon is inspired by multi-day treks and changing conditions. The multi-layer structure wicks moisture away from the skin and keeps your feet warm and dry. The special combination in our multilayer with coolmax and merino wool performs perfectly and adapts to changing conditions. Coolmax and merino wool keep air in for ventilation and insulation for a Drytech solution. The Drytech sock is designed to dry quickly at night and does not absorb sweat and odor. Our Merino wool is always mouse-free and adds warmth and breathability. Uphillsport Recon socks are made with a 4-layer structure. This ensures perfect warmth, moisture regulation and breathability, but the sock is medium in thickness. Recon has level 5 thermal degree. The foot section of the Recon Sock has a fitted heel and elastane grip on the arch of the foot. This provides good support halfway up the foot and adds comfort by keeping the sock wrinkle-free in place. No more blisters with Recon socks. Merino is knitted as terry cloth on the sole; this increases softness and comfort with every step, whether you're going uphill or downhill. Recon is made at calf length to rise well above the boot. This prevents your boot from rubbing over your skin. The Recon sock is available in khaki, green and black in all sizes. Ball points:- Recon is perfect for longer missions in medium to harsh conditions. Recon has a calf length that is well above the shoe - this sock is available in khaki, green and black in all sizes
- Recon Trekking Socks are made with a 4-layer Drytech structure - Several layers wick away moisture and keep the feet warm - This guarantees great breathability and moisture regulation.
- Uphillsport's unique multi-layer structure ensures that the sock is very warm, but of medium thickness - No need for more spacious shoes for cold conditions The foot section of the Recon Sock features a heel and elastane grip on the arch of the foot - This improves support in the middle of the foot, and adds comfort by holding the sock in place, wrinkle-free.
- The heat class is 5, ideal for medium and cold seasons - Merino is knitted as terry on the sole; this increases softness and comfort with every step. Merino also adds breathability
- 4-layer Drytech moisture transfer - keeps feet warm and dry
- Fitted heel and grip on the arch of the foot - improves midfoot support
- Merino on sole - improves breathability, softness and warmth
- Average thickness
- Thermal degree: 5
- Calf length
