• Not in stock - on order
    Savotta water bag The Savotta water bag is an extremely practical product to bring water from a lake into the Savotta sauna tent or into your camp, for example. Packed, the bag takes up almost no space, but filled it can hold up to ten liters of water. The bag is made of durable polyester and therefore practically unbreakable. An important tool for your tours. TECHNICAL SPECIFICATIONS: Colour: olive green Material: 70 D PU polyamide Capacity: 10 litres Warranty The product has a 1-year warranty for material and manufacturing defects. KEY FLAG PRODUCT This Finnish flag product is partly made in our factory in Estonia, but more than 50% of the work is done here in Karstula, Finland.
  • VERTICAL POUCH M

    4 l multifunctional zippered bag. PALS-compatible attachment, designed for use with backpacks. TECHNICAL SPECIFICATIONS:
    • External dimensions: Height: 26 cm, width: 17 cm, depth: 9 cm
    • Bag content closed: 4 l
    • Material: PUR-coated 1000D Cordura
    • PALS attachment: height 3, width 4, fastenings 2 pieces 30 cm
    • Weight: 150 grams
    • Colour: olive green and black
    WARRANTY AND WARRANTY: The product has a 2-year warranty for material and manufacturing defects. KEY FLAG PRODUCT: This Finnish Key Flag product is partly manufactured at our factory in Estonia, but more than 50% of the work is made in Finland.
  • VERTICAL POUCH S

    2 l multifunction bag with zipper. PALS-compatible attachment, designed for use with backpacks. TECHNICAL SPECIFICATIONS: External dimensions: Height: 24 cm, width: 14 cm, depth: 6 cm Pocket contents closed: 2 l Material: PUR-coated 1000D Cordura PALS fastening: height 3, width 3, fasteners 2 pieces 30 cm Weight: 120 grams Colour: olive green and black Warranty: The product has a 2-year warranty for material and manufacturing defects. KEY FLAG PRODUCT: This is a Finnish Key Flag product, which means that more than 50% of the production work is carried out in Finland. Some of the work is outsourced from our factory in Estonia.
  • Savotta Vertical pocket L

    42,9049,00

    VERTICAL POUCH L

    6 l multifunctional zippered bag. PALS-compatible attachment, designed for use with backpacks. TECHNICAL SPECIFICATIONS:
    • External dimensions: height 30 cm, width 17 cm, depth 12 cm.
    • Capacity bag closed: 6 liters.
    • Materials: 1000D Cordura (M05: Foxdura) PUR coating.
    • PALS attachment: height 3, width 4, two attachments 28 cm
    • Weight: 165 grams
    Warranty: The product has a 2-year warranty for material and manufacturing defects.
  • Savotta Utility Pouch Small

    52,9058,90
    A medium-sized pouch for general use. KEY FEATURES
    • Designed for general use
    • Two-way zipper
    • Internal divider and loops for organization
    • PALS weaving tapes on the outside
    • Drainage feed-through at the bottom
    • PALS-compatible mounting system
    • 5-year material and product warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS Weight: 170 g Dimensions: 21 x 13 x 7 cm (H x W x D) Main Material: 1000D Cordura (100% polyamide) Oar: 100% polyester NSN 8465-58-000-3653
  • The Savotta Utility Pouch Mini can be attached to backpacks, tactical belts and the like using the Pals/Molle loops. It offers you space for the little things of everyday life or for a smartphone, compass, weapon cleaning kit, spare batteries or a first aid kit. The bag can be opened quickly and easily with the zipper. - Made in Finland - NSN 8465-58-000-3652 - Universal bag -Zipper - Drainage eye at the bottom - PALS / Molle loops Material: - Backpack: 100% Polyamide, Cordura 1000 den - Webbing: 100% Polyester - Dimensions: 12 x 10 x 6 cm
  • Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties
    • Three sizes: 10×15, 15×20 and 20×30 cm
    • Translucent mesh material
    • Zipper from corner to corner
    • Two 25 mm wide webbing loops in the corners
    • Color options for easy recognition
    • Velcro fastener (hook back) or plain (stand-alone)
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    Technical characteristics
    • Weight: - Standalone 10×15 cm: 32 g - Standalone 15×20 cm: 54 g - Standalone 20×30 cm: 76 g
    • Main material: 100% polyester
    • Webbing: 100% polyester
  • Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties
    • Three sizes: 10×15, 15×20 and 20×30 cm
    • Translucent mesh material
    • Zipper from corner to corner
    • Two 25 mm wide webbing loops in the corners
    • Color options for easy recognition
    • Velcro fastener (hook back) or plain (stand-alone)
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    Technical characteristics
    • Weight: - Hook back 10×15 cm: 37 g - Hook back 15×20 cm: 64 g - Hook back 20×30 cm: 90 g
    • Main material: 100% polyester
    • Webbing: 100% polyester
  • Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties
    • Three sizes: 10×15, 15×20 and 20×30 cm
    • Translucent mesh material
    • Zipper from corner to corner
    • Two 25 mm wide webbing loops in the corners
    • Color options for easy recognition
    • Velcro fastener (hook back) or plain (stand-alone)
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    Technical characteristics
    • Weight: - Standalone 10×15 cm: 32 g - Standalone 15×20 cm: 54 g - Standalone 20×30 cm: 76 g
    • Main material: 100% polyester
    • Webbing: 100% polyester
  • Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties
    • Three sizes: 10×15, 15×20 and 20×30 cm
    • Translucent mesh material
    • Zipper from corner to corner
    • Two 25 mm wide webbing loops in the corners
    • Color options for easy recognition
    • Velcro fastener (hook back) or plain (stand-alone)
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    Technical characteristics
    • Weight: - Hook back 10×15 cm: 37 g - Hook back 15×20 cm: 64 g - Hook back 20×30 cm: 90 g
    • Main material: 100% polyester
    • Webbing: 100% polyester
  • Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties
    • Three sizes: 10×15, 15×20 and 20×30 cm
    • Translucent mesh material
    • Zipper from corner to corner
    • Two 25 mm wide webbing loops in the corners
    • Color options for easy recognition
    • Velcro fastener (hook back) or plain (stand-alone)
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    Technical characteristics
    • Weight: - Standalone 10×15 cm: 32 g - Standalone 15×20 cm: 54 g - Standalone 20×30 cm: 76 g
    • Main material: 100% polyester
    • Webbing: 100% polyester
  • Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties
    • Three sizes: 10×15, 15×20 and 20×30 cm
    • Translucent mesh material
    • Zipper from corner to corner
    • Two 25 mm wide webbing loops in the corners
    • Color options for easy recognition
    • Velcro fastener (hook back) or plain (stand-alone)
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    Technical characteristics
    • Weight: - Hook back 10×15 cm: 37 g - Hook back 15×20 cm: 64 g - Hook back 20×30 cm: 90 g
    • Main material: 100% polyester
    • Webbing: 100% polyester
  • Savotta Tourniquet Pouch

    25,9026,90
    Fits the most common tourniquets from SOFTT-W to CAT Gen 7. Vertical PALS and strap and horizontal strap attachment options. KEY FEATURES
    • Fits most tourniquets, including SOF, CAT Gen 7, SAM-XT
    • Flap with Velcro closure
    • Elastic compartment for slimmer and thicker tourniquets
    • Elastic pen/glow stick loops on the sides
    • Attachment system compatible with PALS and belt
    • One-Wrap for horizontal belt attachment
    • All color options offer good NIR performance (read more)
    • NSN: 6510-58-001-8496
    • 5-year material and product warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • Weight: 65 g
    • Dimensions: 5 x 15 x 4 cm (W x L x D)
    • Strap: 100% polyester
  • Not in stock - on order

    Savotta TORRAKKO

    165,00189,00
    A rifle backpack for a hunter which also meets the requirements for the transport of a firearm thanks to a new rain cover. It works both while hunting and on the way there. The robust and padded rifle compartment can accommodate a rifle with a larger scope as well. The whole package can be tightened sturdily with the compression straps of the bag, making carrying a firearm both comfortable and safe in any terrain. The slim design of Torrakko facilitates moving around in off-road conditions. The thinly padded shoulder straps make shooting while the backpack is on your back easy. The streamlined package has been designed to be as practical as possible. Torrakko has no extra protruding or entangling parts.

    COMPARTMENTS

    The bag (dimensions approximately 45 x 25 x 15 cm) is closed by tightening the drawstring opening which is covered with a protective flap that is secured with buckled straps. The main compartment opens also with two zippers spanning the full length the sides. If these are opened, the entire back of the backpack opens up, making all contents of the backpack very conveniently accessible. The bag can be tightened into a snug package by using the compression straps on the sides. There is a flat, zippered mesh pocket (dimensions approximately 20 x 20 cm) inside the flap where the game pouch of Torrakko is kept by default. The pocket is also ideal for other small items. The bottom of the backpack has a flat pocket which closes with Velcro (dimensions approximately 12 x 20 cm) where the rain cover of Torrakko is kept by default. The game pouch (dimensions approximately 35 x 35 cm) is a bag made of netted fabric with an opening that can be tightened using a drawstring. The game pouch is attached to the back of the backpack with four strap loops which are attached to the compression straps of the backpack. The rifle compartment of Torrakko (dimensions approximately 85 x 25 x 9 cm) is located between the bag and your back. It is open at the top and tapers towards the bottom for the barrel. The rifle can be secured tightly for carrying by using the compression straps of the backpack. The new rain cover covers the entire backpack and also the butt of the firearm which would otherwise remain exposed from the rifle compartment. The rain cover is fastened around the firearm with a zipper and a buckle. So with the rain cover in place, Torrakko is a legal firearm carrying case also in public places as well as in the car. You will no longer have to transport your firearm in a separate bag from which it is then transferred into a backpack. Your rifle can ride from home into the forest, during hunting and back again inside Torrakko.

    OTHER ATTACHMENT POINTS

    Extra supplies that would not otherwise fit inside the backpack can be tied conveniently to the buckled compression straps on the sides. Rain capes and break clothing, for example, travel with you conveniently and readily available on the sides of the backpack.

    CARRYING SYSTEM

    The back, shoulder straps and hip belt of the rifle carrying device are all lightly padded. There is plenty of room for adjustment in both the shoulder straps and the hip belt. The back of backpack has been reinforced with an internal plastic sheet. The padding pillows galore on the back make carrying comfortable.

    TECHNICAL SPECIFICATIONS:

    External dimensions: height 45 cm, width 35 cm, depth 30 cm. Capacity: 30 l. Weight: 1.65 kg. Materials: Polyester (M05: 500D Foxdura), polyester straps and plastic buckles. Colour: M05, black and brown.

    WARRANTY AND GUARANTEE:

    The product has a 2-year guarantee against material and manufacturing defects.

    KEY FLAG PRODUCT:

    This Finnish Key Flag product is partly manufactured on our factory in Estonia, however more than 50 % of its work is made in Finland.
  • Not in stock - on order
    TENT REPAIR KIT The tent repair kit is suitable for repairing tents made of both cotton and cotton mix. The repair patches are fireproof pieces of cotton mix. The kit contains approximately 90 round spots for tents with a diameter of 5 cm and 6 cm, 2 pieces of 40 × 50 cm, 35 ml repair glue and instructions. The patches are intended for cotton mix fire-resistant tents, but they can also be used to repair non-fire-resistant tents. Perform repairs in a well-ventilated area. The glue irritates eyes and skin. The damaged area must be dry and clean from grease or dirt. Divide the glue on to the damaged area and the patch with a brush or spatula. Allow the glue to dry for 5-15 minutes, depending on the air temperature and relative humidity. Press the patch on the damaged area. Squeeze with your hands into the repaired area and make sure that the patch is securely secured by, for example, lightly beating with a rubber hammer. Note! The patch cannot be moved after repair. The glue is immediately firmly secured and the final fixation is reached after 7 days. Beware of glue stains, as the glue can only be removed after drying with acetone or a similar solvent. You should observe the effect of the solvent on the substance when using solvents. If you get glue on your skin, wash it off with soap and hot water. If you get glue in your eye, rinse immediately with plenty of hot water and seek medical attention. Seek medical attention immediately if you have swallowed the substance. Keep the glue out of reach of children. KEY FLAG PRODUCT This product is manufactured at our factory in Karstula, Finland.
  • Key features Spare spark arrester for the Savotta stove 2-year material and manufacturer's warranty Made in Estonia Technical specifications Weight: 430 g Dimensions: 40 x 8.5 cm (L x D) Main material: Steel
  • Spare pipe piece for the Savotta stove 2-year material and manufacturer's warranty Made in Estonia TECHNICAL SPECIFICATIONS Weight: 420 g Dimensions: 40 x 8.5 cm (L x D) Main material: Steel
  • Not in stock - on order

    Savotta Stove

    297,90

    SAVOTTA STOVE

    Savotta stove & stone rack warm Savotta's tents easily and with the stone rack the stove can also be used as a sauna stove in Savotta's Small sauna tent. The stove is also perfect for cooking. This way you can make coffee quickly and easily. At the stove comes a 7-piece smoke tube, which runs smoothly in the stove. Savotta stove and stone rack are sold separately.

    TECHNICAL INFORMATION:

    Weight: approximately 18 kg Height: 31 cm (+ 5 cm chimney slit) Width: 32 cm Depth: 42 cm Material: steel Country of origin : Estonia Height with legs about 55 cm. Size of hair: Fireplace opening: width 23cm, height 10cm Fireplace: height 17cm, width 27cm and depth 41cm The length of the pipes that come with the stove is sufficient for the SA-20 tent. In the case of an elevated tent model, consider the need for additional pipes. Optional stone lattice. (sold separately) The product has a 1-year warranty for material and manufacturing defects.
  • Not in stock - on order
    Compatible with the Savotta tent heater (140154005) Makes it possible to use your tent heater as a sauna heater Stones not included, only use the right sauna stones 2-year material and manufacturer's warranty Made in Estonia TECHNICAL SPECIFICATIONS Weight: 1.4 kg (pair) Dimensions: 40 x 20 x 8 cm (W x L x D) Main material: Steel DESCRIPTION Is attached to the sides of the tent heater with hooks. Make sure the racks are securely secured before loading and warming the stove with stones. Before use, consult the instructions for use of the stove. After each use, clean and dry, store lightly oiled (we recommend flaxseed oil) in a dry place.
  • Savotta Side pouch 8L

    49,9059,90
    Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. The two vertical fastening straps leave an approx. 9 cm wide gap, so you can carry items such as axes, fishing sticks, etc. behind the pouch. Optimal attachment requires a width of four channels and a height of six (min. five) rows of PALS webbing. The compression straps on the side of the backpack, when put on, will prevent any movement of the backpack and its contents. The 6-litre side bag fits all our Jääkäri backpacks. For backpacks with less than six rows of PALS webbing on the sides, the bottom of the bag "hangs". You can have this absorbed by the compression straps on the sides, or you can choose to attach the pouch one step higher to the side of the backpack. Examples of use With an eight-liter capacity, this is clearly a larger side bag, which is perhaps best used on large and high backpacks of 60-100+ liters. Here are some examples of what will fit in such a bag:
    • A large tarp, hammock and accessories
    • A hammock and duvet
    • A lightweight puff jacket and pants or rain gear
    • A Trangia 27 series stove, fuel, water and lots of stuff to cook
    • A Jetboil cooker, a gas cartridge, water and lots of cooking utensils
    • More than 24 hours of rations and snacks
    • Almost a week's worth of spare underwear, interlayers and socks.
    Key features
    • Capacity approx. 8 litres
    • Covered zipper
    • Front vertical loops for compression straps
    • Internal D-ring for attaching small items
    • Internal flat rear compartment
    • Reinforced bottom and sides
    • PALS-compatible mounting system
    • Water drainage opening at the bottom
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    Technical specifications
    • Weight: 270 g
    • Dimensions: 17 x 40 x 11 cm (W x L x D)
    • Main material: 500D Cordura (100% polyamide)
    • Lining: 210D polyamide
    • Webbing: 100% polyester
  • Savotta Side Pouch 6L

    44,9052,90
    Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. The two vertical fastening straps leave an approx. 9 cm wide gap, so you can carry items such as axes, fishing sticks, etc. behind the pouch. Optimal attachment requires a width of four channels and a height of six (min. five) rows of PALS webbing. The compression straps on the side of the backpack, when put on, will prevent any movement of the backpack and its contents. The 6-litre side bag fits all our Jääkäri backpacks. For backpacks with less than six rows of PALS webbing on the sides, the bottom of the bag "hangs". You can have this absorbed by the compression straps on the sides, or you can choose to attach the pouch one step higher to the side of the backpack. Examples of use With a capacity of six liters, this is a medium-sized bag, not small, not large. Something you would expect with a backpack of 30-80 liters. Here are some examples of what will fit in such a bag:
    • A large tarp and accessories
    • A hammock and duvet
    • A lightweight puff jacket and pants or rain gear
    • Two regular 1.5 litre drink bottles
    • A Trangia 27 Series stove, fuel and some stuff to cook
    • A Jetboil stove, a gas cartridge, water and some stuff to cook
    • 24 hour rations and snacks
    Key features
    • Capacity approx. 6 litres
    • Covered zipper
    • Front vertical loops for compression straps
    • Internal D-ring for attaching small items
    • Internal flat rear compartment
    • Reinforced bottom and sides
    • PALS-compatible mounting system
    • Water drainage opening at the bottom
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    Technical specifications
    • Weight: 240 g
    • Dimensions: 17 x 35 x 9 cm (W x L x D)
    • Main material: 500D Cordura (100% polyamide)
    • Lining: 210D polyamide
    • Webbing: 100% polyester
  • Savotta Side pouch 4L

    39,9045,90
    Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. Examples of use As a fairly small pouch with only four liters of capacity, no big things fit in here, but this also makes them very suitable for use on small backpacks with limited height / width on the sides. Here are some examples of what will fit in such a bag:
    • A medium-sized tarp and accessories
    • A lightweight puffy jacket, rain suit or poncho
    • A regular 1.5 liter bottle, and some other stuff
    • An isolated food pot of 0.7 liters
    • A Jetboil burner and a gas cartridge
    Key features
    • Capacity approx. 4 litres
    • Covered zipper
    • Vertical front signalling loops for compression straps
    • Internal D-ring for securing small items
    • Internal flat rear compartment
    • Reinforced bottom and sides
    • PALS-compatible mounting system
    • Water drainage tulip at the bottom
    • 5-year warranty on material and craftsmanship
    • Made in Finland/Estonia
    Technical specifications
    • Weight: 200 g
    • Dimensions: 13 x 30 x 9 cm (W x L x D)
    • Main material: 500D Cordura (100% polyamide)
    • Lining: 210D polyamide
    • Webbing: 100% polyester
  • Savotta Side pouch 12L

    54,9064,90
    Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. The two vertical fastening straps leave an approx. 9 cm wide gap, so you can carry items such as axes, fishing sticks, etc. behind the pouch. Optimal attachment requires a width of four channels and a height of six (min. five) rows of PALS webbing. The compression straps on the side of the backpack, when put on, will prevent any movement of the backpack and its contents. Of our own packs, we recommend the 12L side bag only for the Jääkäri XL. While this is not recommended, you can also make the bag suitable for smaller bags with an absolute minimum of six rows of PALS webbing on the sides, by attaching the bag a step higher and accepting that the bottom becomes a little limp. Examples of use With a capacity of twelve liters, this is a very large side bag, the PALS attachment is five channels wide. Best used on large and high backpacks of 70-100+ liters. Here are some examples of what will fit in such a bag:
    • A tarp, hammock, duvet and accessories.
    • A lightweight puff coat, pants and rainwear
    • A Trangia 27 series stove, fuel, water and lots of stuff to cook.
    • A Jetboil cooker, a few gas cartridges, water and lots of cooking utensils.
    • A few days of rations and snacks
    • A week of spare underwear, intermediate layers and socks.
    • All kinds of big special stuff that you need to take with you.
    Key features
    • Capacity approx. 12 litres
    • Covered zipper
    • Front vertical loops for compression straps
    • Internal D-ring for attaching small items
    • Internal flat rear compartment
    • Reinforced bottom and sides
    • PALS-compatible mounting system
    • Water drainage opening at the bottom
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    Technical specifications
    • Weight: 320 g
    • Dimensions: 21 x 45 x 12 cm (W x L x D)
    • Main material: 500D Cordura (100% polyamide)
    • Lining: 210D polyamide
    • Webbing: 100% polyester
  • Not in stock - on order
    A classic retro backpack for a hunter; the design has remained unchanged since the 1950s. After making something that works once, why fix the design if it is not broken! Just as great for hunting, camping and the city today as it was 60 years ago.
    Due to its size, the 323 saddle sack is ideal for one or two day hunting trips: the backpack holds the necessary overnight equipment, provisions and other useful gadgets and tools comfortably. Once upon a time when men were made of steel and women as tough as nails, you could survive for weeks just with the saddle sack (or months, if you ask remote patrollers who served in wars), sleeping in the wilderness and eating what nature has to offer. Although the needs of a modern camper are different, a good backpack design is still a good backpack design. The traditional saddle sack is as fine a carrying device as it ever was, and it has the sort of a romantic retro vibe that you just cannot find in contemporary backpacks.

    COMPARTMENTS

    The main compartment of the bag (dimensions approximately 45 x 35 x 25 cm) is closed by tightening the opening which is covered with a flap that can be secured with leather straps. The straps are long enough to attach, for example, a rolled sleeping mat or blanket under the flap. If necessary, additional detachable straps can be used to lengthen the straps. The size of the main compartment of the backpack is large enough to fit even a heavy winter sleeping bag inside. The side pockets (dimensions approximately 33 x 10 x 6 cm) are closed with fitted flaps with good coverage and secured with leather straps. The side pockets are ideal for packing large Thermos flasks and other cumbersome, long supplies. The back pocket (dimensions approximately 20 x 30 x 6 cm) is closed with a flap equipped with two leather straps. You can pack plenty of small supplies into the generously sized outer pocket for quick and easy Access.

    OTHER ATTACHMENT POINTS

    There are attachment loops on the sides of the opening for detachable straps. By using straps, it is possible to attach long rolls, such as a blanket or a sleeping mat, securely on top of the bag. Ensure sturdy attachment by closing the flap of the bag over the roll.

    CARRYING SYSTEM

    A special feature of the saddle sack is its steel pipe frame which enables steady and comfortable carrying. The sturdy frame holds the bag firmly in shape and the horizontal leather strap stretched across the lower part of the frame sits comfortably against your lower back, keeping the bag itself from touching your back. The shoulder straps are wide leather straps, the length of which can be adjusted with buckles. Because of the steel pipe frame, it is much more comfortable to carry the saddle sack than a frameless backpack, particularly over long distances and with a heavy load.

    TECHNICAL SPECIFICATIONS:

    External dimensions: height 45 cm, width 45 cm, depth 25 cm. Capacity: approximately 50 l. Weight: approximately 1.40 kg. Materials: paraffin-treated cotton, vegetable-tanned leather and steel buckles. Frame: steel pipe. Colour: olive green with black leather parts.

    WARRANTY AND GUARANTEE:

    The product has a 5-year guarantee against material and manufacturing defects.

    KEY FLAG PRODUCT:

    This Finnish Key Flag product is partly manufactured on our factory in Estonia, however more than 50 % of its work is made in Finland.
  • Not in stock - on order

    FDF DROP LEG PANEL

    Can be attached to a belt or carrying vest, originally designed for and currently in use by the Finnish Armed Forces. SR buckles for quick fast fast attachment and decoupling allow the user to easily scale their worn equipment up or down, quite commonly used as a support platform for gas masks. The internal padding and friction material against the leg guarantee a level of comfort and prevent the platform from moving too much. KEY FEATURES
    • PALS-compatible fastening strap
    • Attached via adjustable belt loops with SR buckles
    • Partially elastic thigh band with SR buckle
    • Internal padding for comfort
    • Friction material on the inside
    • 2-year warranty on material and craftsmanship
    • Finnish Key Flag product
    TECHNICAL SPECIFICATIONS Weight: 230 grams Main material: 1000D Cordura
  • Savotta Rolltop Stuffsack mesh

    20,9034,90
    Somewhat transparent, totally non-waterproof and just neat in many ways, these packing bags are made of a strong mesh fabric. Designed to store, transport and organize all kinds of equipment and items. Because they are made of a mesh fabric, they work very differently from most packaging bags and offer very different functions. There are things in this world that you don't want to pack, transport or store tightly in water or air, mesh does just that. As a bonus mesh, you can see through it, which helps identify the contents of each bag if you have a bunch of these with different gears. Use cases: - By putting wet equipment in it, the mesh allows the contents to dry out. - Clear color coding of your spare clothing in your bag or backpack. - Storage of equipment that you want to "breathe". Attributes
    • Clear mesh construction
    • Rolltop closure with SR buckle
    • Available in a range of sizes from 5 to 40 litres
    • 5-year material and manufacturing warranty
    • Made in Finland &Estonia
    Technical specifications
    • 5L: weight 100 g, flat dimensions 22 x 41 cm (W x L)
    • 10L: weight 140 g, flat dimensions 30 x 52 cm (W x L)
    • 20L: weight 195 g, flat dimensions 37 x 63 cm (W x L)
    • 40L: weight 320 g, flat dimensions 51 x 87 cm (W x L)
    • Materials: Mesh: 100% polyester Webbing: 100% polyester
  • Not in stock - on order
    Border controls A classic from 1989, known in Finnish as the Rajapartio, originally designed for the Finnish border guard. An internal tubular aluminium frame helps to carry unwieldy and heavy loads. What is special is that the Rajapartio backpack has attachment points for a rifle on the outside. Originally designed to carry an assault rifle, the attachment points can also be used very well to attach, for example, a camera tripod or other long special supplies. Compartments The upper main compartment (dimensions approximately 45 x 35 x 22 cm) is closed by attaching the opening of the drawstring, which is secured with a waterproof protective collar that also allows overpackaging. The opening is covered with a large flap that is secured with straps. The generous length of the straps offers plenty of space under the flap to overpack. In the flap is a large, open pouch. When the valve is closed, the opening of the bag is facing upwards and closes so that the contents do not fall. Against the back in the bag is a pocket the size of the entire back for the supporting frame of the backpack. The compartment is also ideal for carrying, for example, a water bag or other flat stuff. The lower compartment of the bag (dimensions about 15 x 35 x 20 cm) is closed with a two-way zipper and fastened with the same straps used to close the flap of the backpack itself. The side compartments (dimensions approximately 30 x 15 x 6 cm) are sealed with waterproof protective collars and covered with flaps that can be secured with straps. The side pocket on the left also has a vertical zipper which makes the contents of the box quickly accessible. OTHER ANCHORAGES On the flap at the back of the backpack and at the bottom of the bag you will find fastening loops to carry a rifle. The loops are also equally suitable for carrying other exceptionally long devices. The load is secured by tightening a belt that encloses the entire backpack. There are attachment points for detachable straps on top of the flap. Large essentials that otherwise do not fit in the backpack can be fastened on top of the flap. The side compartment on the right is tunnel-shaped and there is a mounting point above for a detachable belt. For example, it can easily hold an axe. SUPPORT SYSTEM The wide, anatomically shaped, sturdy shoulder straps and the well-padded hip belt ensure supported and comfortable wearing. The buckle of the hip belt can be detached very quickly with one hand. A very valuable function in a possible emergency. With the support handle on the top, the backpack is also easy to carry by hand. The back is reinforced with an internal, square tube frame made of DUR aluminum. This lightweight frame keeps the backpack upright and is comfortable to carry, even with a slightly heavier load. The support frame can also be removed from the backpack if desired. TECHNICAL SPECIFICATIONS: External dimensions: height 65 cm, width 50 cm, depth 25 cm. Content: approximately 60 l. Weight: about 2.00 kg. Materiaal: 1000D Cordura Frame: DUR aluminium. Colour: olive green. WARRANTY AND WARRANTY: The product has a 5-year warranty against material and manufacturing defects. KEY FLAG PRODUCT: This Finnish Key Flag product is partially manufactured at our factory in Estonia, but more than 50 of its work is made in Finland.
  • Not in stock - on order
    A traditional hooded rain poncho, very multifunctional in all its simplicity, with push buttons along the sides for closure. The rear half is longer than the front to better protect the wearer when worn over a backpack. The poncho can easily be turned into a makeshift shelter by using the binding points, loops and transit tutorials, which can be found in the corners and on the long sides. The Savotta rain poncho is available in two sizes, M for users up to 180 cm and XL for larger than that. Technical characteristics:
    • Sizes: M: width 139cm, back 130cm, front 120cm and XL: width 139cm, back 150cm, front 130cm
    • Weights: M: 397g and XL: 490g
    • Material: 70D polyamide ripstop with PU coating
    • Colour: olive green
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
  • RAIN COVER XL A good waterproof rain cover for larger backpacks (approx. 80-100 liters), such as the Jääkäri XL. Made from strong and waterproof PU-coated 70D polyamide ripstop material. A strong, adjustable elastic cord runs along the edge of the cover and ensures a good fit over packages of different sizes. The elastic cord can also be used to store the cover when not in use - simply roll up the cover into a tight beam and use the cord loop to secure it. This rain cover is widely designed for extra equipment such as sleeping mats and extra side pockets. TECHNICAL DETAILS: Material: 70D polyamide ripstop, with PU coating Colour: olive green Weight: 180 grams Compatible with: Jääkäri XL and similar backpacks of 80-100 liters WARRANTY AND WARRANTY: The product has a 1-year warranty for material and manufacturing defects. FINNISH KEY FLAG PRODUCT: All our tents and backpack frames are made in Karstula, Finland. Textile sewing is done in both our factories in Finland and Estonia. All our products have been awarded the Finnish Key Flag symbol, a feature of Finnish production.
  • RAIN COVER S A good waterproof rain cover for smaller day backpacks (up to about 20 liters), such as the Jääkäri S. Made of strong and waterproof PU-coated 70D polyamide ripstop material. A strong, adjustable elastic cord runs along the edge of the cover and ensures a good fit over packages of different sizes. The elastic cord can also be used to store the cover when not in use - simply roll up the cover into a tight beam and use the cord loop to secure it. For small backpacks with added side pockets we recommend the larger rain cover M. TECHNICAL DETAILS: Material: 70D polyamide ripstop, with PU coating Colour: olive green Weight: 80 grams Compatible with: Jääkäri S and similar backpacks of 15-20 liters WARRANTY AND WARRANTY: The product has a 1-year warranty for material and manufacturing defects. FINNISH KEY FLAG PRODUCT: All our tents and backpack frames are made in Karstula, Finland. Textile sewing is done in both our factories in Finland and Estonia. All our products have been awarded the Finnish Key Flag symbol, a feature of Finnish production.
  • Not in stock - on order
    RAIN COVER M A good waterproof rain cover for medium day backpacks (approx. 30-40 liters), such as the Jääkäri M. Made of strong and waterproof PU-coated 70D polyamide ripstop material. A strong, adjustable elastic cord runs along the edge of the cover and ensures a good fit over packages of different sizes. The elastic cord can also be used to store the cover when not in use - simply roll up the cover into a tight beam and use the cord loop to secure it. For medium-sized backpacks with added side pockets, we recommend the larger rain cover L. TECHNICAL DETAILS: Material: 70D polyamide ripstop, with PU coating Colour: olive green Weight: 90 grams Compatible with: Jääkäri M and similar backpacks of 30-40 liters WARRANTY AND WARRANTY: The product has a 1-year warranty for material and manufacturing defects. FINNISH KEY FLAG PRODUCT: All our tents and backpack frames are made in Karstula, Finland. Textile sewing is done in both our factories in Finland and Estonia. All our products have been awarded the Finnish Key Flag symbol, a feature of Finnish production.
  • Not in stock - on order
    RAIN COVER L A good waterproof rain cover for larger backpacks (approx. 60-70 liters), such as the Jääkäri L. Made of strong and waterproof PU-coated 70D polyamide ripstop material. A strong, adjustable elastic cord runs along the edge of the cover and ensures a good fit over packages of different sizes. The elastic cord can also be used to store the cover when not in use - simply roll up the cover into a tight beam and use the cord loop to secure it. For larger backpacks with added side pockets, we recommend the larger Rain Cover XL. TECHNICAL DETAILS: Material: 70D polyamide ripstop, with PU coating Colour: olive green Weight: 120 grams Compatible with: Jääkäri L and similar backpacks of 60-70 liters WARRANTY AND WARRANTY: The product has a 1-year warranty for material and manufacturing defects. FINNISH KEY FLAG PRODUCT: All our tents and backpack frames are made in Karstula, Finland. Textile sewing is done in both our factories in Finland and Estonia. All our products have been awarded the Finnish Key Flag symbol, a feature of Finnish production.
  • Product description
    SA-20 set of poles (8poles +1 middlepole) for SA-20 tent.
    Weight
    4.5 kg Country of origin Finland
  • Product description
    SA-10 set of poles (8poles +1 middlepole) for Guerilla tent.
    Weight
    3.5 kg Country of origin Finland
  • Product description
    Poleset for JSP tent.
    Weight
    4.5 kg Country of origin Finland
  • POCKET SAW In the wild, you often need strong and sharp tools to cut wood to the desired length and build a fire or shelter. A pocket saw with durable handles is a compact and lightweight product for the job. In practice, the pocket saw is a chainsaw chain that is equipped with sturdy and durable belt handles. When the saw is not used, it is in a practical bag without ringing or rattling. The bag is made of durable 1000D Cordura. With the help of your muscle strength, the pocket saw will bite your teeth into the wood and give you the desired result. If necessary, sticks can also be inserted into the handles for even better handling. Of course, all saws become blunt by use, but the chainsaw will serve you for a long time. The 11 cutting knives can be sharpened with a chainsaw file. TECHNICAL SPECIFICATIONS:
    • Length: 108 cm (chain 65 cm)
    • Chain: tool swatch
    • Handles: polyester tape
    • Bag: polyamide (1000D Cordura)
    • Weight: 150 g (saw 120 g)
    • Colour bag and handles: olive green
    WARRANTY AND WARRANTY: The product has a 1-year warranty for material and manufacturing defects.
  • The most basic accessory of any backpack is a pair of reliable packing straps, we offer a few different styles to meet your specific needs and preferences. The fast and light plastic buckle with side release (SR) is a sure choice for most applications. BUCKLE AND LENGTH OPTIONS To meet specific needs and preferences, we offer a few different buckle options: 1) SR buckle: For most applications, the fast and light plastic buckle with side release (SR) is more than sufficient. No wonder this is the "standard" buckle for this type of belt worldwide. 2) CAM buckle: For really heavy use, a heavier metal cam buckle is a solid choice. There is a reason why the Finnish Defense gives each soldier a pack of belts that are virtually identical to this one. Length options, indicated as the maximum circumference of the object around which the belt can be looped, are 80 cm and 120 cm. The shorter 80 cm is sufficient for most of the stuff you want to attach to the outside of a backpack, sleeping bags and sleeping pillows etc. The 120cm is great for all kinds of bulk goods, field camp tent rollers, firewood etc, it's enough for pretty much anything you'll ever need it for. And hey, if the length is not enough you can always put it on a chain! KEY FEATURES
    • Fast and light SR buckle
    • 25 mm (1") wide strap
    • Two length options: 80 cm and 120 cm
    • Package includes two straps
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • 80 cm: weight 40 g each
    • 120 cm: weight 50 g each
    • Main material: 100% polyester band
  • The most basic accessory of any backpack is a pair of reliable packing straps, we offer a few different styles to meet your specific needs and preferences. The fast and light plastic buckle with side release (SR) is a sure choice for most applications. BUCKLE AND LENGTH OPTIONS To meet specific needs and preferences, we offer a few different buckle options: 1) SR buckle: For most applications, the fast and light plastic buckle with side release (SR) is more than sufficient. No wonder this is the "standard" buckle for this type of belt worldwide. 2) CAM buckle: For really heavy use, a heavier metal cam buckle is a solid choice. There is a reason why the Finnish Defense gives each soldier a pack of belts that are virtually identical to this one. Length options, indicated as the maximum circumference of the object around which the belt can be looped, are 80 cm and 120 cm. The shorter 80 cm is sufficient for most of the stuff you want to attach to the outside of a backpack, sleeping bags and sleeping pillows etc. The 120cm is great for all kinds of bulk goods, field camp tent rollers, firewood etc, it's enough for pretty much anything you'll ever need it for. And hey, if the length is not enough you can always put it on a chain! KEY FEATURES
    • Fast and light SR buckle
    • 25 mm (1") wide strap
    • Two length options: 80 cm and 120 cm
    • Package includes two straps
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • 80 cm: weight 40 g each
    • 120 cm: weight 50 g each
    • Main material: 100% polyester band
  • The most basic accessory of any backpack is a pair of reliable packing straps, we offer a few different styles to meet your specific needs and preferences. The heavy, spring-loaded metal cam buckle is almost indestructible and allows you to use it in situations and tasks where a plastic buckle just isn't strong enough. BUCKLE AND LENGTH OPTIONS To meet specific needs and preferences, we offer a few different buckle options: 1) SR buckle: For most applications, the fast and light plastic buckle with side release (SR) is more than sufficient. No wonder this is the "standard" buckle for this type of belt worldwide. 2) CAM buckle: For really heavy use, a heavier metal cam buckle is a solid choice. There is a reason why the Finnish Defense gives each soldier a pack of belts that are virtually identical to this one. Length options, indicated as the maximum circumference of the object around which the belt can be looped, are 80 cm and 120 cm. The shorter 80 cm is sufficient for most of the stuff you want to attach to the outside of a backpack, sleeping bags and sleeping pillows etc. The 120cm is great for all kinds of bulk goods, field camp tent rollers, firewood etc, it's enough for pretty much anything you'll ever need it for. And hey, if the length is not enough you can always put it on a chain! KEY FEATURES
    • Suspension metal buckle
    • 25 mm (1") wide strap
    • Two length options: 80 cm and 120 cm
    • Package includes two straps
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • 80 cm: weight 52 g each
    • 120 cm: weight 62 g each
    • Main material: 100% polyester band
  • The most basic accessory of any backpack is a pair of reliable packing straps, we offer a few different styles to meet your specific needs and preferences. The heavy, spring-loaded metal cam buckle is almost indestructible and allows you to use it in situations and tasks where a plastic buckle just isn't strong enough. BUCKLE AND LENGTH OPTIONS To meet specific needs and preferences, we offer a few different buckle options: 1) SR buckle: For most applications, the fast and light plastic buckle with side release (SR) is more than sufficient. No wonder this is the "standard" buckle for this type of belt worldwide. 2) CAM buckle: For really heavy use, a heavier metal cam buckle is a solid choice. There is a reason why the Finnish Defense gives each soldier a pack of belts that are virtually identical to this one. Length options, indicated as the maximum circumference of the object around which the belt can be looped, are 80 cm and 120 cm. The shorter 80 cm is sufficient for most of the stuff you want to attach to the outside of a backpack, sleeping bags and sleeping pillows etc. The 120cm is great for all kinds of bulk goods, field camp tent rollers, firewood etc, it's enough for pretty much anything you'll ever need it for. And hey, if the length is not enough you can always put it on a chain! KEY FEATURES
    • Suspension metal buckle
    • 25 mm (1") wide strap
    • Two length options: 80 cm and 120 cm
    • Package includes two straps
    • 5-year material and manufacturer's warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • 80 cm: weight 52 g each
    • 120 cm: weight 62 g each
    • Main material: 100% polyester band
  • A larger counterweight bag for Finnish Senop lead weights and 10 x 10 cm identification plates. Designed to work with the usual Ops Core FAST XP high cut helmet and our High cut helmet cover V1. KEY FEATURES
    • Internal elastic compartments for lead weights
    • Designed for six weight discs of 45 x 60 x 5 mm
    • Can also carry weights of other shapes and sizes
    • Attaches to helmet rail with screws and loop
    • Upper fastening straps for our High cut helmet cover V1
    • External elastic loops for cord management etc.
    • Also functions as a holder for spectacle straps
    • 10 x 12 cm loop on the outside for patches
    • All color options offer good NIR performance (read more)
    • 5-year material and product warranty
    • Gemaakt in Finland
    TECHNICAL SPECIFICATIONS
    • Weight: 60 g
    • Fabric: 500D Cordura (100% polyamide)
    • Webbing: 100% polyester
    • Buckles: steel
    DESCRIPTION The internal elastic webbing compartments are designed for our locally common Senop lead discs (45 x 60 x 5 mm), as used by the Finnish Defence Force, but they can also fit various other gear. In the large space under the elastic bands, a block of max. 100 x 80 x 20 mm, the two smaller weight compartments each fit a block of max. 45 x 80 x 15 mm. Because the pocket is open on the sides, you can guide the elastic of your goggles through it and it will stay firmly in place on the helmet no matter what. The elastic loops on the outside allow you to guide and tidy up cords, attach glow sticks, etc. The included screw buckles allow you to attach the case very securely to the back of your helmet, so that it does not move when it is weighted. The fastening buckles work with Ops-Core, Galvion and similar rail screws. The upper attachment straps attach to the 25mm webbing on our High cut helmet cover V1. No weight discs included, these are sold separately.
  • A compact counterweight bag, attaches with Velcro and via webbing loops to screws/rails. Designed for 45 x 60 x 5 mm Finnish Senop lead weight discs. KEY FEATURES
    • Designed to fit up to six 45 x 60 x 5 mm weight plates
    • Two compartments for weight discs
    • One large compartment for random items
    • Attaches with Velcro and girth loops with screw adapters
    • External elastic loops for cord management etc
    • Also functions as a holder for spectacle straps
    • 5 x 15 cm loop on the outside for patches
    • All color options offer good NIR performance
    • 5-year material and product warranty
    • Gemaakt in Finland
    TECHNICAL SPECIFICATIONS
    • Weight: 50 g
    • Fabric: 500D Cordura (100% polyamide)
    • Strap: 100% polyester
    • Buckles: steel
    DESCRIPTION The internal elastic webbing compartments are designed for our locally common Senop lead discs (45 x 60 x 5 mm), as used by the Finnish Defence Force, but they can also fit various other gear. In the large space under the elastic bands, a block of max. 100 x 60 x 20 mm, the two smaller weight compartments each fit a block of max. 45 x 60 x 15 mm. The pouch can be attached to the back of your helmet/cover with Velcro and two adjustable straps. The straps come with screw buckles, attach these to the rear chin strap/rail screws on your helmet, place the pouch where you want it and thread the two straps through the screw buckles. If you fasten the straps properly, they will ensure that the pouch does not lie around when you weigh it down. If your helmet has rails with suitable attachment points, then you may not need to use the buckles. Because the pouch is open on the sides, you can guide the elastic of your goggles through it and the pouch will stay firmly in place on the helmet no matter what. The elastic loops on the outside allow you to guide and tidy up cords, attach glow sticks, etc. Even if the straps are attached to the inside of the back wall, there's still some loop surface you can use to store small patches when you're not using them. No weight plates included, these are sold separately: NVD counterweight kit.
  • Not in stock - on order
    As the name implies, the Multi-PurPose Foam Mat is very versatile. Designed to fit in the pocket of the Jääkäri S drinking bladder, where it provides extra wearing comfort and support. The bottom of the mat has an extremely water-resistant rubber coating that holds it firmly in place on any surface. The forest is never completely dry, so there is rarely an abundance of places where you can sit or put your things. The MPP Foam Mat solves this problem for good, and ensures that you always have a dry spot by the late campfire.
    • A simple multipurpose padded mat
    • Sit on it
    • Kneel on it
    • Put it in your backpack
    • Use it as a mouse pad
    • 5-year material and manufacturing warranty
    • Made in Finland/Estonia
    Technical characteristics Weight: 165 grams Dimensions: 25 x 25 x 0.6 cm (W x L x H) Materials Main material: 1000D Cordura Filling: 6 mm foam with closed cells Bottom: 600D polyester with rubber coating
  • Not in stock - on order
    LJK MODULAR A modular, heavy-duty backpack with external frame, designed for the Finnish Armed Forces in 2008. Capacity approx. 80 l. The modular LJK is designed to meet the needs of the armed forces for a modern military backpack. The characteristics and details are well thought out according to the needs of the 21st century without compromising durability and reliability in extremely heavy military use. The backpack can be customized to your needs with separate pockets and numerous attachment points. There's not much left of the old LJK backpack, except for the name, external frame design and a construction that can withstand pretty much anything. The compartments and structure of the entire backpack have been completely redesigned. The end result is more practical than before and considerably more versatile. The modular LJK has also proved to be a functional and reliable carrier when used by the Finnish armed forces and the Finnish border guard. A traditional backpack with external frame is at its best with a heavy load, but is also suitable for lighter trips. The external tube frame ensures air circulation between the pocket itself and the user's back, significantly reducing the heat load. Although anatomical backpacks have taken over some grass in the backpack market, there are still situations where nothing is better than an external frame backpack. Compartments The upper compartment of the bag (dimensions about 50 x 35 x 25 cm) is closed by attaching the opening of the drawstring, which is secured with a waterproof protective collar that also allows overpackaging. The opening is first covered with a attached straps and is then covered with a generous flap that is secured with buckle closures. The straps are long enough to wear, for example, a sleeping bag or mat under the flap. In addition to the buckles on the straps, there are spare metal buckles under the valve in the event of a worst case scenario. The top and lower compartments of the bag are separated by an intermediate shot that can open, allowing the whole bag to be changed to one large compartment if desired. In the upper compartment there is a mesh bag for small items. The pouch can also contain a wide hydration bladder and on each top corner of the backpack are exhausts for the hoses. The bottom compartment of the bag (dimensions approximately 35 x 35 x 25 cm) is closed with a two-way zipper that is secured with two buckles. The buckles should always be fastened because they take away some of the weight and strain the zippers. The side pockets (dimensions approximately 30 x 17 x 11 cm) open from the top with long zippers. The side compartments are removable and can be attached to the sides or back of the backpack at the necessary height. They can also be completely omitted if desired. The bags are attached to the backpack with MOLLE girders used in military equipment. It is a very simple, durable and reliable attachment method. OTHER ANCHORAGES There is a generous number of fastening loops on top of the valve and in the main compartment. This makes it possible to secure even large loads (such as the beloved Sissi tent) on or under the valve by means of detachable tires. The loops on the inside of the flap are perfect for attaching a sleeping mat. Especially a military-style tent mattress can be attached to this by means of the elastic bands. There are several belt loops on the sides and back of the backpack that can be attached to various essentials with detachable straps. The backpack comes with four two-piece buckles that can be moved freely between the backpack's attachment points. By default, they are used to strengthen the attachment of the side boxes. There is a lot of MOLLE webbing on top of the flap, on the sides, back and bottom of the bag and in the lower compartment for attaching additional pockets. You can also easily tie supplies to the girth using detachable straps. The lower corners of the bag have open pockets to attach long devices, e.g. an axe handle, to the side of the backpack. The lower corners of the shoulder straps have loops that serve as attachment points for small objects, such as water bottles. SUPPORT SYSTEM The frame of the support system is the strong aluminium tube frame of the LJK model. Unlike civilian backpacks, it has no upper bend because the bend easily sits in the head's way when it is necessary to move on rough terrain. Furthermore, the frame is reinforced with additional support blocks. The shoulder straps and waistband are firmly padded and anatomically shaped. In addition, the lower back is supported by a separate thick pillow. The buckle of the hip belt is a special plastic buckle that can be pulled in both directions and can be opened by pressing on the middle. The nodded chest strap provides extra comfort and support when wearing. The stepless adjustable (in length and width) supporting support support system and hip belt of the backpack can be adapted to users of all different heights and sizes. It is possible to adjust the center of gravity of the shoulder straps even while walking by tightening and loosening the straps attached to the top of the frame. The centre of gravity of the backpack itself between the shoulders and the hips is adjusted by loosening and tightening the shoulder straps and hip belt. TECHNICAL SPECIFICATIONS: External dimensions: height 80 cm, width 35 cm, depth 30 cm. Content: 80 l. Weight: 3.90 kg. Materials: 1000D Cordura, polyester band, special Delrin plastic buckles and Kroko zippers. Frame: DUR aluminium. Colour: olive green. WARRANTY AND WARRANTY: The product has a 10-year warranty against material and manufacturing defects. KEY FLAG PRODUCT: The product has a 10-year warranty against material and manufacturing defects. This product is no longer made by Savotta. The Savotta Jääkäri XL replaces this article.
  • Not in stock - on order

    Savotta LJK

    545,00
    LJK This heavy backpack with external frame was originally designed for paratroopers of the Finnish army in the early 1980s. Capacity approx. 80 l. This backpack, designed for heavy military use, can be used more heavily than most users, such as a free fall of an aircraft. Given its properties, LJK is also suitable for average users and it is an excellent choice for those looking for a lifetime collaboration. The LJK backpack was launched in 1985. Originally designed for military use, the backpack was also warmly welcomed by civilian users. The special features of the model are a frame without the upper curve, which makes moving easier because it does not get in the way of the head. There are no pockets on the sides of the backpack in the lower section, which makes cross-country skiing with the backpack more comfortable. The LJK backpack is still used in the Finnish Armed Forces and is just as popular with recreational users. A traditional backpack with external frame is at its best with a heavy load, but is also suitable for lighter trips. The external tube frame ensures air circulation between the user's pocket and back, significantly reducing the heat load. Although anatomical backpacks have taken over some grass in the backpack market, there are still situations where nothing is better than an external frame backpack. Compartments The upper compartment of the bag (dimensions about 45 x 40 x 20 cm) is closed by attaching the opening of the drawstring, which is secured with a waterproof protective collar that also allows overpackaging. The opening is covered with a generous flap that is secured with straps. The straps are long enough to wear, for example, a sleeping bag or mat under the flap. If necessary, the straps can be easily extended with the included detachable straps. The top and lower pockets of the bag are separated by a built-in distributor. The valve of the upper compartment has a flat compartment for small objects (dimensions about 25 x 45 cm), which are also suitable for larger objects that need to be easily accessible. The exterior of the upper compartment is equipped with a flat card pocket with zipper (dimensions approximately 30 x 30 cm). The lower compartment of the bag (dimensions about 35 x 35 x 20 cm) opens on both vertical sides with a zipper. The zippers are protected with a button closure. The flaps should always be gently fastened, as they take away some of the weight and strain the zippers. The side pockets (dimensions approximately 40 x 10 x 7 cm) are closed by attracting the waterproof protective collar, which is covered with a flap that can be secured with straps. The left side pocket is divided into two compartments with a built-in distributor. The lower compartment is accessible via the zipper on the side. In the lower back there is a large outer compartment (dimensions approximately 32 x 25 x 10 cm) that is closed by tightening the protective collar. The bag is covered with a valve that is fastened with two straps. This bag is ideal for packing items that should be easily accessible during the walk, such as a camping stove and food. OTHER ANCHORAGES There is a generous number of fastening loops on top of the valve and in the main compartment. This makes it possible to secure even large loads (such as the beloved Sissi tent) on or under the valve by means of detachable tires. The loops on the inside of the flap are perfect for attaching a sleeping mat. Especially a military-style tent mattress can be attached to this by means of the elastic bands. Axes or other long, narrow stocks can be transported behind the tunnel-shaped side pockets. The fasteners with straps above the side compartments ensure the attachment of the supplies. The lower corners of the shoulder straps have loops that serve as attachment points for small objects, such as water bottles. SUPPORT SYSTEM The frame of the support system is the strong aluminium tube frame of the LJK model. Unlike civilian backpacks, LJK does not have an upper bend because the bend easily sits in the head when it is necessary to move on rough terrain. Furthermore, the frame of LJK has been reinforced with additional support blocks. The shoulder straps and waistband are firmly padded and anatomically shaped. The buckle of the hip belt can be detached very quickly with one hand. It is a very valuable feature in a possible emergency. The nodded chest strap provides extra comfort and support when wearing. The stepless adjustable (length) support support system and lap belt of the backpack can be adapted to users of all different heights and sizes. It is possible to adjust the center of gravity of the shoulder straps even while walking by tightening and loosening the straps attached to the top of the frame. The centre of gravity of the backpack itself between the shoulders and the hips is adjusted by loosening and tightening the shoulder straps and hip belt. TECHNICAL SPECIFICATIONS: External dimensions: height 85 cm, width 55 cm, depth 30 cm. Content: 80 l. Weight: 3.70 kg. Materials: fabric 1000D Cordura, polyester bands, metal buckles and Kroko zippers. Frame: DUR aluminium. Colour: olive green. WARRANTY AND WARRANTY: The product has a 10-year warranty against material and manufacturing defects. KEY FLAG PRODUCT: This Finnish Key Flag product is partially manufactured at our factory in Estonia, but more than 50 of its work is made in Finland. This product is no longer made by Savotta. The Savotta Jääkäri XL replaces this article.
  • Savotta Kukkaro hip pack

    66,4569,45
    Compact waist bag with versatile internal organization and external attachment points. Waist bags are already very versatile, but the Kukkaro is even more so thanks to the many ways you can customize it to suit your specific needs. On the inside, the bag has a number of options for organizing your belongings: elastic webbing loops of different sizes, flat pockets, tie-down loops and a loop surface for attaching organizers with hooks. The back wall has a large flat compartment for larger items. On top of the compartment is sewn a single row of 50 mm elastic webbing, which contains two smaller approx. 4 cm wide loops and a larger approx. 9 cm wide loop, suitable for small items such as multi-tools, lighters etc. The front wall has two small flat compartments with attachment loops at the top. An 18 x 10 cm loop area on the inside of the front makes it possible to attach all kinds of organisers with hooks, etc. A large, open flat pocket on the back of the backpack allows you to store the waist belt if needed and it can be used as a large belt loop if you want to carry the Kukkaro on a belt or the hip belt of a backpack. The PALS webbing on the side wings and bottom allows you to attach small pockets, elastic cords and accessories. The straps on the side wings can also be used to quickly attach the backpack to the compression straps on the side of a backpack using additional SR buckles or G-hooks. Such buckles or G-hooks are not included with the backpack. Learn Finnish with Savotta: "Kukkaro" is Finnish for a bag or pouch that is a type of handbag, but not a handbag, nor just any small bag. The free Finnish online dictionary www.sanakirja.org defines "kukkaro" as "a small, usually leather pouch or bag, in which one carries small necessities and accessories, such as money, tobacco, etc. By definition, such a small fanny pack is really the ultimate "kukkaro". KEY FEATURES
    • Capacity approx. 1.5 litres
    • 25 mm SR buckle strap (max. circumference approx. 145 cm) attached to stabilizing wingsFlat open pocket on the body side for storing the belt
    • Large main compartment with zipper
    • One large and two small flat inner compartments
    • One large and two small elastic loops for organization on the inside
    • Two attachment points on the inside for dummy cords and carabiners
    • 18 x 10 cm loop area on the inside for organizers with hooks
    • 1 x 2 PALS weaving straps on both side wings
    • 1 x 3 PALS weaving tapes at the bottom
    • 15 x 5 cm loop surface on the outside for patches and identifiers
    • Water drain grommets at the bottom
    • All color options offer good NIR performance
    • 5-year material and product warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • Weight: 215 g
    • Dimensions: 20 x 12 x 5 cm (W x H x D)
    • Main fabric: 500D Cordura (100% Polyamide)
    • Strap: 100% polyester
  • Not in stock - on order
    LIGHT BORDER PATROL Known in Finnish as the Kevyt Rajapartio, originally designed for the Finnish border guard. Capacity approx. 25 l. Compact, simple and versatile. Due to its slim shape, the backpack will not get in the way even in tight spaces and is ideal for skiing and hunting. In its size category, the Kevyt Rajapartio is an unusually sturdy backpack to carry. The internal support frame reinforced with aluminum keeps the backpack firmly in shape, even with a heavy load. With the compression straps of the bag, even a pack that is not full can be fastened so that it sits firmly and does not move back and forth. Compartments The bag (dimensions approximately 50 x 25 x 10–20 cm) is closed by tightening the opening of the drawstring, which is secured with a waterproof protective collar that also allows overpackaging. The opening is covered with a flap that encloses the top of the backpack and is fastened with straps. The generous length of the straps offers plenty of space under the flap to overpack. The contents of the upper compartment are also quickly accessed from the right side via a vertical zipper that runs over the full height of the backpack. Against the back in the bag is a pocket the size of the entire back for the supporting frame of the backpack. The compartment is also ideal for carrying, for example, a water bag or other flat stuff. There's a holder for a thermos bottle in the bag, so you can always find him where it should be. With the four compression straps on the sides of the backpack, the bag can be pulled compactly, even if it is not full. The flap of the bag has a flat zippered compartment for small items (dimensions approximately 20 x 20 cm). OTHER ANCHORAGES On the flap at the back of the backpack and at the bottom of the bag you will find fastening loops to carry a rifle. The loops are also equally suitable for carrying other exceptionally long devices. The load is secured by tightening a belt that encloses the entire backpack. It is also possible to attach items that would not otherwise fit in the backpack behind the compression straps of the bag. The bottom of the backpack has four fastening loops for detachable straps. Tying to the bottom is an excellent method of wearing for, for example, rolled-up sleeping mats. On both sides of the hip belt are fastening loops for dangling small objects. SUPPORT SYSTEM The wide, anatomically shaped, sturdy shoulder straps and the well-padded hip belt ensure supported and comfortable wearing. The hip belt buckle can be quickly detached with one hand, which is a very valuable feature in a possible emergency. The nodded chest strap provides extra comfort and support when wearing. With the support handle on the top, the backpack is also easy to carry by hand. The back is reinforced with a very durable plastic plate frame on which two vertical aluminum rods are attached with rivets. This lightweight frame keeps the backpack upright and is comfortable to carry, even with a slightly heavier load. The support frame can also be removed from the backpack if desired. The generously sized and sturdy cushions against the back are a rarity in a backpack of this category and make the Kevyt Rajapartio a surprisingly comfortable little backpack to carry. TECHNICAL SPECIFICATIONS: External dimensions: height 50 cm, width 25 cm, depth 20 cm. Content: 25 l. Weight: 1.75 kg. Materiaal: 1000D Cordura Frame: DUR aluminium. Colour: olive green. WARRANTY AND WARRANTY: The product has a 5-year warranty against material and manufacturing defects. KEY FLAG PRODUCT: This Finnish Key Flag product is partially manufactured at our factory in Estonia, but more than 50 of its work is made in Finland. Shipping within 24 hours!
  • Not in stock - on order
    KEVYT RAJAPARTIO The daypack, originally designed for the Finnish Border Guard and also known as the Kevyt Rajapartio, is compact, simple and very versatile. Due to its slim shape, the backpack does not stand in the way even in tight spaces and is ideal for skiing and hunting. In its size category, the Kevyt Rajapartio is an unusually sturdy backpack to carry. The aluminium-reinforced internal support frame keeps the backpack in strong shape even when heavy loads. With the compression straps of the bag, even a backpack that is not full can be put on so that it sits firmly and does not rock. Compartments The bag (approximately 50 x 25 x 10-20 cm dimensions) is closed by tightening the drawstring opening secured with a waterproof protective collar that also allows overfrapping. The opening is covered with a flap that encloses the top of the backpack and is fastened with straps. The generous length of the tyres offers a lot of space under the flap for overpackaging. The contents of the upper compartment can also be accessed quickly from the right side via a vertical zipper that runs over the full height of the backpack. Against the back in the bag is a pocket the size of the entire back for the supporting frame of the backpack. The compartment is also ideal for carrying, for example, a drinking bag or other flat items. In the bag is a holder for a thermos so you can always find it where it belongs. With the four compression straps on the sides of the backpack, the bag can be tightened compactly even when it is not full. The flap of the bag has a flat pocket with zipper for small items (size about 20 x 20 cm). OTHER ANCHORAGES On the flap at the back of the backpack and at the bottom of the bag you will find attachment loops to carry a rifle. The loops are also equally suitable for transporting other exceptionally long devices. The load is secured by donting a strap that circles the entire backpack. It is also possible to attach items that would not otherwise fit in the backpack behind the compression straps of the bag. The bottom of the backpack has four fastening loops for detachable straps. Binding to the bottom is an excellent method of wearing for, for example, coiled sleeping mats. On both sides of the lap belt there are fastening loops to attach small items. SUPPORT SYSTEM The wide, anatomically shaped, sturdy shoulder straps and the well-padded hip belt ensure supported and comfortable wearing. The hip belt buckle can be quickly detached with one hand, which is a very valuable feature in a possible emergency. The buckle collar provides extra comfort and support when wearing. With the support on the top, the backpack is also easy to carry by hand. The back is reinforced with a very durable frame of plastic plate to which two vertical aluminum rods with rivets are attached. This lightweight frame keeps the backpack upright and can also be carried comfortably with a heavier load. The support frame can also be removed from the backpack if desired. The generous and sturdy cushions against the back are a rarity in a backpack of this size category and make the Kevyt Rajapartio a surprisingly comfortable small backpack to carry. TECHNICAL SPECIFICATIONS:
    • External dimensions: height 50 cm, width 25 cm, depth 20 cm.
    • Content: 25 l.
    • Weight: 1.75 kg.
    • Materials: 1000D Cordura, metal buckles and 8 mm spiral zippers.
    • Frame: DUR aluminium.
    • Colour: olive green.
    Warranty: The product has a 5-year warranty for material and manufacturing defects. KEY FLAG PRODUCT: This Finnish Key Flag product is partly manufactured at our factory in Estonia, but more than 50% of the work is made in Finland.

Title

Go to Top