- Thumb-activated level 2 retention
- Sound-absorbing lining for stealth pulling and holstering
- Durable material provides protection with a sleek design for minimal size
- User-adjustable passive retention
- Low-friction internal material for smooth and effortless pulling
- Includes Jacket Slot Belt Loop attached to holster.
-
Not in stock - on order
The T-Series L2D is our main thumb-activated holster intended for service use with its full slide protection and our Jacket Slot Belt Loop. With its streamlined thumb-activated retention, the T-Series keeps your firearm at the ready while maintaining total safety. Thanks to a pulling movement that works according to the Master Grip principle, you can fight even under the most stressful conditions. A combination of reinforced outer polymer and smooth, sound-absorbing, hydrophobic lining ensures that your T-Series will perform regardless of the elements and the situation. As an extra safety measure, the L3D also has a strap over the back of the weapon. Includes Jacket Slot Belt Loop attached to the holster. Quick Dual Release (QDR) belt loop and 2-slot belt loop are sold separately. -
Not in stock - on order
Our laser-cut IFAK bag is designed to store an operator's personal medical kit, including combat mesh, CAT and/or trauma bandage. They are all safely stored in a removable cover that fits into the outer cover. The cover and medkit are held securely in place by elastic sides and Velcro. A large tab with non-slip Hypalon coating is attached to the inner cover and if you pull it with force, the inner cover comes loose from the otter pouch, allowing you to open it quickly and easily with one hand. The Laser Cut IFAK is designed to be attached horizontally to one of our Warrior straps, by means of 4 MOLLE arms. It can also be mounted vertically using our Warrior 90-degree adapter. Please note, content is not included and for illustrative purposes only. -
The Warfighter™ Cummerbund is the most advanced semi-rigid cummerbund plate carrier on the market. It was designed in collaboration with both Israeli and U.S. Special Forces to solve all comfort and functionality issues with load-bearing cummerbunds. Compatible with any plate carrier with hook and loop surfaces, including the K-Zero Plate Carrier and the K19 Plate Carrier (2.0 and 3.0 versions) with the Cummerbund MOLLE back flap adapter. Most stretch cummerbunds sag under the weight when wearing heavy gear such as radios and sideways armor. The Warfighter Cummerbund is semi-reinforced to support heavy loads, stretches for comfort and maneuverability, but will never sag, even under heavy loads. Allows you to quickly and easily switch between Velcro flaps, quick-release fasteners or FirstSpear Tubes®, on both sides, so you can adjust your cummerbund exactly the way you want it. Equipped with three rows of MOLLE, for maximum mounting possibilities, both internally and externally. Despite this, it retains a lightweight, skeletal design that ensures maximum airflow and keeps you cool under fire. The Warfighter Cummerbund is compatible with the K-Zero Plate Carrier without the need for accessories or modifications. It is also compatible with the K19 Plate Carrier by adding only the modular MOLLE flap on the back. It is compatible with Agilite Flank™ hard sideways armor carriers and all other common sideways armor, radios, pouches and more. Whether you're defending your country on the tip of the spear, defending your community, or defending your home, the Warfighter cummerbund will give you an edge.
*Compatible with K19 Plate Carrier by adding Cummerbund Backflap Adapter.
Specs
Compatible with FirstSpear Tubes® and other quick-release fasteners
Dimensions:
M: 57*14*1cm(22.5*5.5*0.5 inches)
L: 25*5.5*0.5 inches (64*14*1cm)
XL: 28*5.5*0.5 inch(72*14*1cm)
Weight:
M: 126gr
L: 140gr
XL: 152gr
Materials:
- Laser cut Velcro overlay panels
- Laser cut Squadron™ laminate
- 500D CORDURA® Mil Spec Tactical Nylon
- CURV® thermoplastic composite material
-
Not in stock - on order
With the K19 Back Flap Cummerbund adapter you can attach the Warfighter Cummerbund or other cummerbunds with Velcro to the K19 Plate Carrier (versions 2.0 and 3.0). Attaches to the back of the K19 Plate Carrier via MOLLE. *Plate carrier for illustrative purposes only. -
Warrior's Medium Horizontal MOLLE Pouch is ideal for carrying a variety of accessories or Medic Kit, etc. This bag takes up 5 rows of MOLLE on each compatible chest strap or bag. SIZE High - 5.5 in (14cm) Wide - 8.6in (22cm) Deep - 3in (7.5cm) -
Not in stock - on order
Side plates are vital to staying alive in a gunfight, but are often bulky and clunky. The Agilite Flank™ side plate carriers ensure that your side plates have a low profile, are comfortable and integrate seamlessly with your Plate Carrier. - Incredibly low profile and lightweight for maneuvering in tight CQB environments - Fits 6"X6" or 6"X8" side plates - Can be mounted both internally and externally via MOLLE low-profile mounting - Integrated low profile rib cage to prevent chafing - Compatible with all MOLLE Cummerbunds including the K-Zero Plate Carrier (internal mount), K19 Plate Carrier (external mount) and WarFighter™ Cummerbund. Sizing - Fits 6"X6" or 6"X8" side plates (including Blindside™ side plates) - Compatible with the following Agilite platforms: K-Zero plate carrier (internally mounted) K19 plate carrier (externally mounted) Warfighter™ garter (internally mounted) **FLANK™ SIDE PLATE CARRIERS ARE SUPPLIED IN PAIRS** Dimensions: 7*6.5*8 inch(18*17*20cm) Weight: 90gr Materials: - Laser cut Velcro overlay panels - 500D CORDURA ® Mil Spec Tactical Nylon *plate carrier not included, for illustrative purposes only. -
The Snigel GP Pouch 3 2.0 has a removable elastic cord and a pull tab to facilitate use. A light pouch for general use to store small objects. The pouch is designed to be light and take up as little space as possible, while remaining strong enough for military use. Elastic band on the pouch to keep the contents safe even when the valve is open. Pull tab on the flap to open it easily, even with gloves on. Velcro flap and pull tab for easy opening The flap can be slid into the pouch and secured with Velcro, making it easier to access the items you carry in the case. Drain hole at the bottom. Thanks to the folding system, the pouch can be attached to any vest or belt. The bag has foldable Velcro straps at the back so that the bag can be worn horizontally on the belt. To wear it vertically, use the quiet and easy-to-use fold back system on the back of the case. This system makes it possible to attach the pouch without removing other pouches from the belt. Capacity: 0,2L Fits: Pepper spray short, short wide flash bulbs, distraction grenades, 40mm grenades, GPS, cell phone Fits: Equipment vest, belt, leg plate or leg mount. -
The Lowa Zephyr MK2 GTX HI is a mission boot with the ideal balance of maneuverability, lightness and stability. The HI-CUT upper provides the support needed during skydiving and fast roping. The upper is made of a combination of water-repellent, tear-resistant suede and abrasion-resistant, breathable CORDURA® material. An innovative locking hook makes it possible to adjust the laces individually at the forefoot and ankle. The waterproof, highly breathable GORE-TEX Extended Comfort laminate is ideal for use in temperate or relatively wet environments. The double-layer PU midsole with a MONOWRAP® frame surrounds and supports the foot like an exoskeleton. The ZEPHYR MK2 GTX HI is certified as a work footwear according to EN ISO 20347:2012. It is antistatic and has a cold and heat-insulating sole. The outsole is not only non-slip - it is also resistant to oil, gasoline and contact heat. GUARANTEED PROTECTION AGAINST THE WEATHER - EVEN IN HOT TEMPERATURES. GORE-TEX Extended Comfort Footwear Guaranteed protection against the weather, even in hot temperatures: The ZEPHYR MK2 GTX HI is equipped with a GORE-TEX Extended Comfort footwear membrane. The innovative technology offers optimal waterproof protection and breathability. Permanently waterproof The membrane provides reliable waterproof protection. No matter what kind of activity you're planning, you can count on GORE-TEX technology to keep your feet pleasantly dry. High breathability GORE-TEX shoes are designed with optimal breathability in mind and are a joy to wear even in intense activities and hot weather. Water cannot enter the shoe, and moisture produced in the shoe escapes through billions of pores in the GORE-TEX membrane. Windproof The GORE-TEX membrane reliably repels wind and weather. This allows you to go on the road, regardless of the weather. LACING WITH TWO ZONES, SO THE SHOES FIT WELL Thanks to the two-zone lacing system used in the ZEPHYR MK2 GTX HI, the forefoot and upper have their own separately adjustable lacing zones. This allows the shoe to be individually adapted to the anatomy of the foot and strung in different ways for climbs and descents. DOUBLE INJECTION, UPPER AND SOLE BECOME A FIXED UNIT For effective cushioning and increased comfort, the sole of the ZEPHYR MK2 GTX HI is attached to the upper in a technically demanding injection process. The upper is placed in a specially designed mold. Then several layers of PU foam are poured into it. During this process, the sole and upper material are fastened together. Lightweight For this process, a plastic called polyurethane is used. It is a very light foam filling. Damping The plastic polyurethane is a foam filling with very good damping properties. The plastic retains its shape and bounces back to its original state, even when the millions of small bubbles are often pressed together. This, in turn, creates a good rebound effect. A wide range of design options Thanks to direct injection, the sole can be designed in a very large number of ways. Due to the versatile properties of the materials used, the shoes can be effective in a large number of areas. STABLE FRAME With the LOWA-MONOWRAP® frame, the midsole of the ZEPHYR MK2 GTX HI offers the very best comfort. This three-dimensional design of the midsole was developed by LOWA in 1995. The frame cradles the foot comfortably and supports it when the wearer of the shoe ventures over uneven surfaces. The sole design is slightly raised for shoes with a STABILITY FRAME. Good conductivity of the foot The foot fits optimally in the shoe thanks to the three-dimensional design of the frame. Increased comfort The special design of the midsole ensures that the foot fits well in the shoe. The foot is pleasantly cradled by the three-dimensional frame. Lightweight The LOWA-MONOWRAP® is made of a plastic called polyurethane. It is a very light material. -
Not in stock - on order
Quiet Warrior USA Patch. The 5.11 moral patches are the perfect way to have a little fun without compromising your professional awareness or tactical skills. Features- Velcro fastening
- Made of TPU
- Diameter approx. 7.5 cm
- Color: 019
-
Axe And Blade Crest Patch. The 5.11 moral patches are the perfect way to have a little fun without compromising your professional awareness or tactical skills. Features- Velcro fastening
- Made of TPU
- Color: multicolor (999)
-
High all-round desert boot
Dune is a comfortable and robust shoe that is an essential part of the uniform of active duty soldiers. Dune adapts seamlessly to the natural shape of your feet and keeps you feeling fresh and comfortable even after a long march. The sole guarantees a firm grip on surfaces such as sand, stones, snow or mud. This keeps your feet pleasantly cool on long working days.Product description
- Inner lining: Mesh
- Footbed SJ foam sole
- Upper material: Textile
- Standardization: ASTM F3445:2021, EN ISO 20347:2012
- Standards: OB
Breathable upper Increased humidity and temperature control for longer wearing comfort.Antistatic Antistatic shoes prevent static electrical charges from being developed and ensure that they are discharged effectively. Volume resistance between 100 KiloOhm and 1 GigaOhm.SRC Non-slip soles are one of the most important features of safety and work shoes. SRC non-slip soles pass both SRA and SRB slip tests, they are tested on both steel and ceramic surfaces. -
Our Tactic model is a high-cut leather boot that is perfectly suited for all-round tactical activities. The Tactical boot has a strong shaft which makes this boot lightweight and still offers torsion control when walking around. This boot has an outsole that is oil resistant and can also withstand temperatures up to 300 °C. With the heel anchor, ladder grip and SRA anti-slip, this boot also offers good grip even when walking over a ceramic tile moistened with a diluted soap solution.
Product description
- Upper material: Nappa Action leather, Textile
- Inner lining: Mesh
- Footbed: SJ foam sole
- Outsole: Rubber
- Safety standard: OB/FO, HRO, SRA
- Size range: EU 35-48 / UK 3.0-13.0 / US 3.0-13.5 / PN 21.5-31.5 / KOR 230-315
- Steel weight: 0.632 kg
- Standard: EN ISO 20347:2012
- ASTM: F3445:2021
Oil & fuel resistant The outsole is resistant to oil and fuel.Heat-resistant outsole The outsole can withstand high temperatures up to 300°CBreathable leather upper Natural leather offers high wearing comfort combined with durability in versatile applications.SRA The slip resistance is one of the most important features of safety and work shoes. SRA non-slip soles are tested on a ceramic tile with diluted soap solution. -
The Covert Flex Double Pistol Pouch allows you to carry more ammo in your gear. The Covert Flex Double Pistol Pouch is designed to store 2 PA magazines or equivalent magazines. The flap of the bag can be attached to the front of the bag so you can attach a bungee kit to it (sold separately). The shorter pocket height with retention insert makes it easier to change chargers. Attach the bag to any MOLLE or HEXGRID® platform with the FLEX-HT™️ mounting system. Features- Double pocket for 2 magazines
- Suitable for PA or equivalent warehouses
- The flap of the bag can be attached to the front of the bag so that a bungee kit can be added (sold separately)
- FLEX-HT™ mounting system
- Mounting on any MOLLE or Hexgrid® platform
- Short pocket height with internal PC compression
- Webbing reinforcement for wear and durability
- Drain hole
- 500D nylon, Duraflex® snaps
- Dimensions: 12,7 x 9,5 x 3,2 cm
-
Attaches quickly and easily to the front of the Agilite Pincer™ Placard, giving it a whole new level of organization, storage and capabilities in one compact package.- Features a low profile with easily accessible administration pocket with both internal organization and a loop area for attaching velcro inserts.
- Double side panels with laser-cut MOLLE, perfect for attaching Pincer™ Pistol Mag pouches or other single-column pouches of your choice.
- 2 internal elastic loops on the back, ideal for storing chemlights, trauma scissors, markers, pens and more.
- 500D CORDURA® Mil Spec Tactical Nylon
- Laser cut Squadron™ laminate
- Laser cut Velcro overlapping panels
-
Not in stock - on order
The Agilite Pincer Pistol Pouch is a MOLLE backpack for a quick-to-pull, low-profile elastic pistol magazine for a single double-stacked 9mm pistol magazine (and other similarly sized items). The magwell's patented funnel-shaped design allows you to grab or re-index a magazine with one hand.- Open-top pistol bags are popular, but have inherent flaws. They are often clumsy, clumsy, noisy or impossible to re-index a warehouse with one hand.
- The Pincer Pouch is lightweight, has a low profile, is quiet and you can put a magazine in it without hitches.
- The Pincer pistol pouch is incredibly versatile, with double-cut laser-cut rear MOLLE to fit perfectly on all combat belts and plate carriers.
- Includes height-adjustable flap to secure smaller items like multi-tools, flashlights and more.
- Works perfectly in combination with the Pincer Placard 2n layer admin pouch
-
The Agilite Pincer Pistol Pouch is a MOLLE backpack for a quick-to-pull, low-profile elastic pistol magazine for a single double-stacked 9mm pistol magazine (and other similarly sized items). The magwell's patented funnel-shaped design allows you to grab or re-index a magazine with one hand.- Open-top pistol bags are popular, but have inherent flaws. They are often clumsy, clumsy, noisy or impossible to re-index a warehouse with one hand.
- The Pincer Pouch is lightweight, has a low profile, is quiet and you can put a magazine in it without hitches.
- The Pincer pistol pouch is incredibly versatile, with double-cut laser-cut rear MOLLE to fit perfectly on all combat belts and plate carriers.
- Includes height-adjustable flap to secure smaller items like multi-tools, flashlights and more.
- Laser cut Velcro overlapping panels
- Laser cut Squadron™ laminate
- 500D CORDURA® Mil Spec Tactical Nylon
-
The Agilite Team Wendy Helmet BUMP Cover protects the integrity and painted surface of your Team Wendy BUMP helmet, extends its life and gives you full accessory management. It fits like a glove on the Exfil shell and is suitable for both the Exfil Carbon and the Exfil LTP helmets, so you have a perfect fit for both. Unique features of the cover include the left and right cable routing channels, smooth, zipper-free sides and an upper bungee accessory management area for IR flashes, cameras, etc.dat features mil-spec polymer holders with laser-engraved Agilite scorpions. The mesh portion of the cover is strategically placed to allow free airflow into the helmet's ventilation holes and keep you cool within range. The cover also has an exit at the back, so the Team Wendy Exfil rear 'V' shaped shock cord can be removed and used even when the cover is on. The cover also extends over and protects the front lip of the helmet, which is a vulnerable spot and usually the first spot where the paint peels off. The Agilite Team Wendy Exfil BUMP cover is easy to apply or remove in seconds. It is made from durable mil-spec materials and is designed, tested and manufactured in Israel. A Berry-compliant version is also available for bulk orders on request. Sizing - Team Wendy EXFIL Bump LTP/Carbon helmet cover available in 2 sizes: M/L and L/XL - Fits all Team Wendy Bump Helmets Including: - Team Wendy Exfil Carbon (Rails 2.0 & 3.0) - Team Wendy Exfil LTP Helmet ((Rails 2.0 & 3.0) Specs Weight: 5oz (143g) - 1000D tactical nylon - Flat Polyester Mesh 380g/m2 - Laser engraved polymer bungee channels - Back loops for AA and CR123 NVG batteries - Made in Israel Details - Fits all Team Wendy Bump Helmets Including: - Team Wendy Exfil Carbon (Rails 2.0 & 3.0) - Team Wendy Exfil LTP Helmet (Rails 2.0 & 3.0) - Agilite precise fit - Next generation lower profile central bungee retention for IR flashes, cameras etc. - Integrated cable management channels - Full spectrum, rock-solid accessory platform - Easy installation - can be mounted on the helmet in seconds ATTENTION: Rear pouch not included. You can order it separately here. -
The perfect little bag to dump your empty magazines into during a firefight. Also useful for storing gloves, hearing protection, etc. Use it to store evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things that you don't want in your hands. You wear it rolled up in the bottom of the equipment vest. Pull the square D-ring if you want to open the pouch. Zipper at the top. Accommodates 4 warehouses. Attributes- Article number: 22-00301-56-000
- Weight:160 g
- Dimensions: 24 × 16 × 9 cm
-
The MoG Abseil/Rappel gloves have been developed in collaboration with various dedicated users and specialists in tactical rope training and altitude work instructors. The result is a slim fit abseil/rappel glove that allows the user to walk smoothly on the rope thanks to a number of distinctive features:- Palm made of soft goatskin and durable split leather, with a very high abrasion resistance (level 4, or more than 8000 cycles according to the Martindale test!) and excellent dexterity (level 5).
- The glove offers basic protection against heat and is certified according to EN407 - Contact heat. (level 1).
- Slim finger design for good control when rigging and to enable activities such as rigging, climbing structures and ladders, vertical movements, etc.
- The fingertips of the index finger and thumb are touch-sensitive to the manipulation of touch-screen devices.
- The reinforced zones provide an extra layer of protection against abrasion and perforations.
- The back of the hand is made of a 4-way stretch fabric that is breathable and comfortable.
- Part of the knuckle area is provided with a neoprene patch to protect the knuckles from accidental bumps during ropes or climbing.
- Comfortable neoprene cuff that gives the wrist freedom of movement and basic protection against bumps.
- Integrated leather-reinforced hole in cuff for easy attachment of carabiners or gloves to belts, plate racks or bags, or to facilitate donning and doffing.
- Strong Velcro closure with large flap for adjustable fit and easy on and off.
- An ID label is sewn into the glove for easy personal identification of the glove for safety and hygiene purposes.
- The MoG Abseil/Rappel 9162 is currently available in full black (in stock) and Coyote Brown (on request).
- Unisex model available in sizes 6 (XS) to 13 (3XL)
- The glove is certified according to EN 388 and EN 407 standards for mechanical protection and for protection against contact heat respectively.
-
Cut protection cover, designed to protect the upper arm and forearms from cuts. Equipped with a soft and ergonomically designed hand attachment part that keeps the sleeve firmly in place. Knitted in 13gg para-aramid. Cut protection level C. Approved for contact heat level 1. Ambidextrous. Oeko-tex approved. Approved for food- Cut protection level C
- Ergonomically designed hand attachment section
- Contact heat level 1
- Ambidextrous
- Sizes M, L, XL
- Oeko-tex approved
- Approved for food
- Single knitted
- Steel fibres
- Para-Aramid
- Elastane
- HPPE
- Arm protectionCut protection level C (ISO 13997)
- Contact heat protection level 1 (100°C, EN 407)
- Fiberglass-free
- REACH compliant
- Oeko-Tex Confidence in textiles
- Approved for food contact - All types of foods
- Regular fit
- Ambidextrous
- Ventilating
- Elastic at wrist
-
- Low-profile general-purpose pouch to store and organize essential items without sagging or flapping
- MOLLE mount on the back (3 MOLLE slots on the front and 3 MOLLE slots on the bottom)
- Pass-through for attachment to all straps
- Built-in shock cord gives you the ability to tie items internally without wobbling or sagging.
- Shock cord also serves as an attachment point for a Tourniquet
- Built-in internal organization, including a loop for attaching velcro inserts.
- Proven in battle in Israel
- Fits in one size
- Can be attached to any MOLLE surface: Occupies 3 MOLLE slots at the bottom and across
- 500D CORDURA® Mil Spec Tactical Nylon
- Milspec WebbingYKK Zippers
- Drainage hole
-
Pentagon Ranger 2.0 Pants newly designed 65% Polyester 35% Cotton Rip-stop fabric 215gsm. with an all-new specially developed mechanical stretch fabric. Perfect for Tactical, Medics, Range or casual Outdoor use. Specifications- 65% Polyester 35% Cotton
- 225gsm
- Mechanical 2-way stretch fabric
- YKK® main zipper
- Internal button
- Prym® snap button
- Teflon™ stain-resistant treated by Dupont®
- Tunnel tube waistband
- Stuffed bag
- Internal knee pads pockets
- Multifunctional groin pocket
- Convenient flap on Cargo bag
- Reinforced seat
- Dart pattern waistband
- 2 back pockets
- Document bag on cargo bag
- Internal pockets in the cargo bag
- Diamond cross for more freedom of movement
-
The radio is an essential part of your gear and the new Radio 2.0 Flex pouch ensures it's safely accessible and held in place during your dynamic activities. It is equipped with a Fidlock® magnetic adjustment system and the MOLLE and Hexgrid® compatible FLEX-HT™ mounting system. It also has non-slip internal straps to reduce movement and the extendable half side panels are suitable for microphone mounts. Features- Improved radio bag 2.0
- Elastic drawstring
- Fidlock® magnetic adjustment
- Stretchy side panels
- Internal anti-slip webbing reinforcement
- FLEX-HT™ mounting system
- Hypalon® pull tab with buckle at the back
- Drainage hole at the bottom of the bag
- 500D Nylon, Duraflex® G.C. snap fastener
- Internal dimensions: 14.6 x 7.6 x 3.8 cm
- Weight: 60 g
- Colors: Black (019), Coyote (134), Ranger Green (186), Dark Navy Blue (724)
-
5.11 Tactical woodland camo patch. 5.11 Moral Patches are the perfect way to have a little fun without compromising your rigor or tactical ability. Features- Velcro fastening
- Made of fabric
- Dimensions approx: 7 x 3 cm
-
K9 Hex. The 5.11 moral patches are the perfect way to have a little fun without compromising your rigor or tactical ability. Features- 3 small hexagonal patches
- Velcro fastening
- Made of rubber
- Approx. dimensions : 2,5 x 2,5 cm
-
Not in stock - on order
5.11 Tactical Hello Darkness patch. Moral patches 5.11 are the perfect way to have a little fun without compromising your rigor or tactical ability. Features- Velcro fastening
- Made from chewing gum
- Dimensions: 7 x 7 cm
-
With the Original Magpul® 5.56 NATO, you can get your warehouse out of the warehouse holder very quickly, allowing you to switch warehouses tactically more efficiently. It also reduces the noise of magazines clattering against each other when you're on the go. This is an essential accessory to avoid missing your warehouse in stressful situations and to increase your speed. These extractors are designed to replace the tape + paracord system that special forces used to make it easier to pull magazines out of their pockets. CHARACTERIZE:- Compatible with 5.56mm NATO magazines: FAMAS, M16, M4 or other magazines of the same caliber.
- Suitable for aluminium or polymer warehouses
- Made of highly resistant thermoplastic rubber with a rough, non-slip surface
- Very easy to use even with gloves on
- Easy to remove and install
- Weight: 14 g
- Sold per piece
-
A marker-sized camouflage paint used to paint airsoft replicas, firearms, and equipment. The marker is equipped with a sponge that efficiently covers painted surfaces. With this technique, it is easy to create simple layers and advanced camouflage patterns by novice painters and experienced users. The paint itself is non-toxic, water and scratch resistant. The paint dries after 10 minutes, but you get the best result after 48 hours. The matte tint of the paint negates light reflections and increases camouflage properties. It is easy to apply to polymers, ceramics, metals and textiles. -
A marker-sized camouflage paint used to paint airsoft replicas, firearms, and equipment. The marker is equipped with a sponge that efficiently covers painted surfaces. With this technique, it is easy to create simple layers and advanced camouflage patterns by novice painters and experienced users. The paint itself is non-toxic, water and scratch resistant. The paint dries after 10 minutes, but you get the best result after 48 hours. The matte tint of the paint negates light reflections and increases camouflage properties. It is easy to apply to polymers, ceramics, metals and textiles. -
The Agilite Micro MAP is a rear attack panel that attaches to any plate carrier and gives it a compact, extremely versatile, extra layer of storage and capabilities without extra bulk. It has been developed for units that carry out short missions, often in small spaces, and that require a high level of performance and diverse capabilities in an exceptionally compact package. Attaches to ANY plate carrier with MOLLE on the back and does not require its own zippers or other mounting systems (including the Agilite K-Zero and K19 plate carriers). Unlike other back panels that can only hold 1.5 liters of water, the Micro MAP can carry a full 3 liter hydration layer. Optimized for the Agilite 3 Liter SAPI Hydration Bladder - the first tactical hydration bladder designed specifically for SAPI Plate Carriers. The unique shape of the bladder maximizes the space available for carrying 3 liters of water, while still keeping the bladder in a low profile and non-intrusive. The Micro MAP features a stowable beavertail that expands the carrying capacity and can accommodate a wide range of additional gear, including helmets, clothing, and more. The beavertail has a fold-down flap for additional tools, such as a bolt cutter, rifle, and other items. Includes a full pass-through function for even longer items. Two built-in administration pockets for convenient storage of smaller items. Integrated cable management channels for organizing all your cables, without snagging. Whether you're on a mission or responding to a threat, the Micro MAP ensures that your entire gear and support system is at your fingertips. Sizing The Micro MAP fits ANY Plate Carrier with MOLLE on the back. Specs- 500D & 1000D CORDURA® Mil Spec Tactical Nylon
- Mil Spec tyres
- YKK Zippers
- Main compartment volume - 3 liters
- Max. volume beavertail - 8 liters
- Weight: 0.6 kg
- Dimensions: 35cm*28cm (13.7" x 11")
-
Phosphorescent PVC patch with Arktis logo and GhostFace from the movie Scream. At night, all cats are grey, or almost. "Darkness descends on the land, with All Hallows' Eve fast approaching. But you don't have to be afraid of ghosts and spirits, the real monsters have always been there. While unholy creatures can be terrifying, it's the Operators who really stand out in the night." CHARACTERIZE: Phosphorescent PVC patch Dimensions: 45 x 60 mm -
Handy Condor Ifak Patch to stick on any velcro surface. Perfect for providing your pouches with the IFAK identification.- Velcro strap for attachment to any loop surface
- Woven patch
- Size: 2"H x 4"W
- Size: 5.08cm H x 10.16cm W
- Imported
-
Clean, simple dump bag for empty magazines and other clutter. Attachment system compatible with PALS and strap. Main features:- Suitable for 4-5 rifle magazines
- Top edge bound with webbing to maintain shape
- Inner collar with adjustable elastic cord
- Folds into a very compact bundle
- SR buckle for attachment when folded
- Attachment system compatible with PALS and belt
- Water drainage at the bottom
- All color options offer good NIR performance (read more)
- NSN: 1005-58-001-8495
- 5-year material and product warranty
- Made in Finland/Estonia
- Weight: 150 g
- Dimensions: 13 x 30 x 13 cm (W x L x D)
- Main fabric: 500D Cordura (100% Polyamide)
- Strap: 100% polyester
-
Add effective camouflage to your gear with these serrated laser-cut camouflage strips. Quick and easy to apply, remove and reuse. KEY FEATURES- 3D effect camouflage for gear
- Kit contains five approx. 145 cm long scrim strips
- Lightweight Laser Cut 500D Cordura
- Easy to apply, remove and reuse
- All color options offer good NIR performance
- 2-year material and product warranty
- Gemaakt in Finland
- Weight (in retail box): 110 g
- Fabric: 500D Cordura (100% polyamide)
-
A larger counterweight bag for Finnish Senop lead weights and 10 x 10 cm identification plates. Designed to work with the usual Ops Core FAST XP high cut helmet and our High cut helmet cover V1. KEY FEATURES- Internal elastic compartments for lead weights
- Designed for six weight discs of 45 x 60 x 5 mm
- Can also carry weights of other shapes and sizes
- Attaches to helmet rail with screws and loop
- Upper fastening straps for our High cut helmet cover V1
- External elastic loops for cord management etc.
- Also functions as a holder for spectacle straps
- 10 x 12 cm loop on the outside for patches
- All color options offer good NIR performance (read more)
- 5-year material and product warranty
- Gemaakt in Finland
- Weight: 60 g
- Fabric: 500D Cordura (100% polyamide)
- Webbing: 100% polyester
- Buckles: steel
-
A compact counterweight bag, attaches with Velcro and via webbing loops to screws/rails. Designed for 45 x 60 x 5 mm Finnish Senop lead weight discs. KEY FEATURES- Designed to fit up to six 45 x 60 x 5 mm weight plates
- Two compartments for weight discs
- One large compartment for random items
- Attaches with Velcro and girth loops with screw adapters
- External elastic loops for cord management etc
- Also functions as a holder for spectacle straps
- 5 x 15 cm loop on the outside for patches
- All color options offer good NIR performance
- 5-year material and product warranty
- Gemaakt in Finland
- Weight: 50 g
- Fabric: 500D Cordura (100% polyamide)
- Strap: 100% polyester
- Buckles: steel
-
Magazine pouch for two regular AK/RK 30 round magazines. Tuck tab and Velcro closure, PALS and strap-compatible attachment system. KEY FEATURES- Suitable for two AK/RK 30rd magazines
- Protective lid with insert tab and Velcro closure
- Built-in Velcro "damper" in the lid
- Circumference and retention adjustable via elastic cord
- Reinforced bottom
- PALS and belt-compatible attachment system
- Water drainage tulip at the bottom
- All color options offer good NIR performance
- NSN: 1005-58-001-8494
- 5-year material and manufacturing warranty
- Made in Finland/Estonia
- Weight: 115 grams
- Dimensions: 8 x 23 x 5 cm (W x L x D)
- Main fabric: 1000D Cordura (100% Polyamide)
- Band: 100% polyester
- RK 30e plastic magazine, 2 pcs
- AK-47 30e steel magazine, 2 pieces
- AK-74 30th magazine, 2 pieces
- AR15 30e PMAG with Ranger Plate, Pack of 2
- IFAK insert
- 0.5 litre bottle
- Radio
-
Magazine holder for two AR15 magazines of 30 cartridges. Tuck tab and Velcro lid closure, PALS and strap compatible fastener. KEY FEATURES- Suitable for two AR15 30 rd magazines
- Protective lid with pleated tab and hook-and-loop closure
- Built-in hook-and-loop "silencer" in the lid
- Circumference and retention adjustable via elastic cord
- Reinforced bottom
- Attachment system compatible with PALS and belt
- Water drainage transit at the bottom
- All color options offer good NIR performance
- 5-year material and product warranty
- Made in Finland/Estonia
- Weight: 100 g
- Dimensions: 8 x 19 x 5 cm (W x L x D)
- Main fabric: 1000D Cordura (100% Polyamide)
- Strap: 100% polyester
- AR15 30 rd PMAG without Ranger Plate, 2 Pack
- AR10 20 rd magazine, 1 pcs
- HK417 20 rd magazine, 1 pcs
- IFAK insert
- Flashbang / smoke grenade
- Radio
-
Designed to integrate seamlessly with webbing/MOLLE systems on plate carriers, bags, belts, and more, the MoG glove holder offers unparalleled versatility. Keep your gloves securely in place with the choice of a reliable hook-and-loop closure or a sturdy key ring. This pouch is not only for gloves, but also a true multi-purpose holder, perfect for organizing and carrying ropes, keys, a flashlight, or other essential accessories. Upgrade your gear with the MoG Glove Holder - your solution for convenience and functionality. Main features :- Durable webbing with adjustable hook-and-loop fasteners for both belt and glove holders, keeping out dirt and sand
- Easy-to-open glove holder thanks to the additional pull strip
- Universal hook and loop system, perfect for easy attachment to plate carriers, backpacks and all belt systems
- Strong and durable steel carabiners - multifunctional system for gloves, keys and other equipment
- All black
- Coyote Brown
-
For more than a decade, Beretta and its Research and Development department have continuously invested in designing technologically advanced accessories and apparel solutions for the Armed Forces. This experience of comparing and field-testing products together with military experts has led to the Training Gear collection for civilians - for both enthusiasts and professionals. Items from the Training Gear clothing and accessory collection are distinguished by their extensively researched high-quality materials, applied technologies and attention to detail. The range of tactical accessories is characterized by products designed for training activities at the shooting range and beyond. Features- Made of durable, water-repellent material
- Velcro fastening
- Foldable
- Inner cord
- 100.0% polyester
-
Not in stock - on order
- Tactical Agilite patch
- Silicone, Hook & Loop Tactical Agilite Logo Patches
- in Coyote Tan, Black, and Ranger Green
-
Not in stock - on order
The Lowa Zephyr MK2 GTX MID intervention shoe is a perfect blend of maneuverability, lightness and stability, making it ideal for special military or police units, as well as all armed forces. The mid-height upper supports the foot during descents in free-rope and does not restrict movement during close combat. It features a closed structure with Velcro closure, which is particularly useful for keeping laces in place and preventing knots. It is lined with a mixture of water-repellent, tear-resistant suede and abrasion-resistant, breathable CORDURA® fabric. Thanks to a locking hook, the lacing can be perfectly adjusted at the forefoot and ankle. Lacing technology with two separate lacing zones on the forefoot and upper. This means that the shoe can be adapted to the anatomy of the foot and can be strung differently for climbs and descents. Thanks to the waterproof and breathable GORE-TEX Extended Comfort Footwear membrane, this model is ideal for work in temperate or wet areas. Its double-layer PU midsole is reinforced with a MONOWRAP® structure, which supports the foot like a kind of exoskeleton. The ZEPHYR MK2 GTX MID is a certified professional boot. Features- Intervention shoe
- Waterproof and breathable properties
- GORE-TEX Extended Comfort waterproof/breathable lining
- Inner protection to prevent premature wear due to descent
- Good holding damping to minimize the impact of landing
- Closed lace hooks to prevent them from accidentally snagging during airborne activities
- 2 separate lacing zones on the forefoot and upper
- Comfort insole
- Midsole with LOWA MONOWRAP® structure to support the foot
- Non-slip "Lowa® X-Trac Military" outsole
- Optimal grip on smooth, wet and greasy surfaces.
- Non-slip, resistant to oil, gasoline and contact heat.
- The outsole is also antistatic and has a heat- and cold-insulating sole.
- Size UK 6.5 - 12 - 13
- Shaft height: Medium
- Weight/pair (UK size 8) : 1140 g
- Color : Coyote OP(731)
- Work shoe certified according to DIN EN ISO 20347:2012 / Code: O2 HI CI WR HRO FO SRC
- Direct injection molded upper sole
- Polyurethane foam
- Double-layer midsole sprayed directly onto the shoe
- Midsole: 100% Polyurethane (PU)
- Outsole: Special rubber compound
- Insole: approx. 9% Polyamide / approx. 90% Polyurethane (PU)
- Outer material: 80% suede leather, 20% textile
- Lining: 100% GORE-TEX Extended Comfort Footwear
-
The MoG 'Target shooting glove series' has been developed in collaboration with a variety of dedicated and heavy users within Special Forces and law enforcement during extensive training sessions in a variety of environments. The Target Trivium 8114 is a semi-fingerless and slim fit tactical glove equipped with the MoG ArmaSuede and ErgoShield technologies. Combining extreme durability with an ergonomic impact design, the glove offers a snug fit, yet the dexterity and precision of bare fingers for optimal control and versatility in a variety of tasks. FYI : Trivium is Latin for 'triple' and refers to the 3 open fingers. Main features :- Palm material made of ArmaSuede - synthetic suede that combines high dexterity with extremely high abrasion resistance.
- ArmaSuede also protects the user from contact heat of 100 degrees for 10 seconds.
- Semi-fingerless model with full dexterity for perfect weapon control (sniper, ...) or for operating radio and sensitive equipment. You don't have to cut off the index finger of your glove.
- The C-Grip construction improves the durability of your glove.
- Back hand made of 4-way stretch, durable, breathable and quick-drying fabric.
- ErgoShield - 3D molded and low profile TPR design, such as on the knuckles and back of the fingers, that protects you from shocks, bumps or pinch hazards. It's barely perceptible protection against impacts.
- Comfortable neoprene cuff provides excellent freedom of movement at the wrists and basic impact protection.
- High-quality Velcro fastener, double stitched, prevents dust or sand trapping.
- Mixed silicone print for excellent grip on weapons, ropes, etc., but also on textiles, sweaty skin, ...
- Reinforced opening that doubles as a sturdy pull tab as an attachment point to a belt or carabiner
- All black
- Coyote Brown
- Wolf Grey (only on order in larger quantities)
-
The updated Condor Gen III Draw Down Waist Pack features a slimmer design and more storage capacity in a more streamlined profile. Perfect as a standalone fanny pack or seamlessly attached under compatible plate carriers. Thanks to its narrower width, the Draw Down sits perfectly under standard plates without restricting freedom of movement during dynamic situations. This covert support pack offers space for everyday essentials or tactical items. The loop-lined main compartment accommodates leashed accessories such as holsters, mag pouches and admin organizers. With its discreet weapon portability, the updated Draw Down is the perfect partner for your adventures at the shooting range and in the city.- Redesigned to optimize capacity while maintaining a compact size
- Wider zipper opening for easier access
- Interchangeable strap system
- Can be used as a fanny pack or attached to a plate carrier
- Loop-lined interior for hooked accessories
- Zippered back pocket for valuables
- Volume: 2.5L // 152.5 cu in
- Size: 7"H x 10"W x 2.5"D
- Size: 17.78 cm×25.4 cm×6.35 cm
- Imported
-
Pair of gloves for tactical operations, very comfortable with a perfect ergonomic fit for the hand. They have an anatomically designed knuckle protection against impact and are compatible with touch screens.- Glove for tactical use with high wearing comfort
- Ergonomic cut perfectly adapted to the hand
- Good grip thanks to synthetic leather on the palm
- Digital leather reinforcements in the palm
- Touchscreen compatible
- Anatomically pre-shaped soft protector on the back of the hand
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Touchscreen compatible
- Anatomical soft protector to protect the knuckles
- Digital leather reinforcement on the palm
- Secure fit thanks to Velcro fastener
- Also available in black and camouflage
- Back hand material: Main material: 94% Polyamide, 6% Elastane; Reinforcement: 60% polyamide, 38% polyurethane, 2% carbon
- Palm material: main material: 60% polyamide, 38% polyurethane, 2% carbon; Reinforcement: 100% leather
- Material: Digital Leather, Synthetic Fibers
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical fit, Touchscreen compatible
- Area of use: Tactical use, combat use
- Areas of use: Military Special Forces, S.W.A.T. / SEK, general policing, urban and off-road operations
- Colours: black
- Closure: Velcro
-
Pair of gloves for tactical operations, very comfortable with a perfect ergonomic fit for the hand. They have an anatomically designed knuckle protection against impact and are compatible with touch screens.- Glove for tactical use with high wearing comfort
- Ergonomic cut perfectly adapted to the hand
- Good grip thanks to synthetic leather on the palm
- Digital leather reinforcements in the palm
- Touchscreen compatible
- Anatomically pre-shaped soft protector on the back of the hand
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Touchscreen compatible
- Anatomical soft protector to protect the knuckles
- Digital leather reinforcement on the palm
- Secure fit thanks to Velcro fastener
- Also available in black and camouflage
- Back hand material: Main material: 94% Polyamide, 6% Elastane; Reinforcement: 60% polyamide, 38% polyurethane, 2% carbon
- Palm material: main material: 60% polyamide, 38% polyurethane, 2% carbon; Reinforcement: 100% leather
- Material: Digital Leather, Synthetic Fibers
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical fit, Touchscreen compatible
- Area of use: Tactical use, combat use
- Areas of use: Military Special Forces, S.W.A.T. / SEK, general policing, urban and off-road operations
- Colors: Camo
- Closure: Velcro
-
Pair of gloves for tactical operations, very comfortable with a perfect ergonomic fit for the hand. They have an anatomically designed knuckle protection against impact and are compatible with touch screens.- Glove for tactical use with high wearing comfort
- Ergonomic cut perfectly adapted to the hand
- Good grip thanks to synthetic leather on the palm
- Digital leather reinforcements in the palm
- Touchscreen compatible
- Anatomically pre-shaped soft protector on the back of the hand
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Touchscreen compatible
- Anatomical soft protector to protect the knuckles
- Digital leather reinforcement on the palm
- Secure fit thanks to Velcro fastener
- Also available in black and camouflage
- Back hand material: Main material: 94% Polyamide, 6% Elastane; Reinforcement: 60% polyamide, 38% polyurethane, 2% carbon
- Palm material: main material: 60% polyamide, 38% polyurethane, 2% carbon; Reinforcement: 100% leather
- Material: Digital Leather, Synthetic Fibers
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical fit, Touchscreen compatible
- Area of use: Tactical use, combat use
- Areas of use: Military Special Forces, S.W.A.T. / SEK, general policing, urban and off-road operations
- Colours: Black
- Closure: Velcro
-
Pair of black tactical gloves, lightweight and very comfortable, with an ergonomic fit that fits perfectly in the hand. They have an excellent feel and are touchscreen compatible. Product information- Lightweight glove with high wearing comfort
- Extremely tangible
- Ergonomic cut perfectly adapted to the hand
- Synthetic leather reinforcements on the palm
- Breathable
- Touchscreen compatible
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Highly tactical glove
- High wearing comfort thanks to anatomical fit
- Touchscreen compatible - easy operation of smartphone or tablet
- Secure fit thanks to Velcro fastener
- Also available in coyote and camouflage
- Back hand material: 100% aramid; Reinforcement: 60% polyamide, 38% polyurethane, 2% other fibres
- Palm material: 60% polyamide, 38% polyurethane, 2% other fibres
- Material: synthetic fibers, leather
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical Fit, Breathable, Touchscreen Compatible
- Scope of application: Searches, Tactical use
- Areas of application: S.W.A.T. / SEK, General policing
- Colours: black
- Closure: Velcro