- Tactical Agilite patch
- Silicone, Hook & Loop Tactical Agilite Logo Patches
- in Coyote Tan, Black, and Ranger Green
-
Not in stock - on order
-
Expand your tactical gear set with the Agilite Scorpion Patch. Agilite Scorpion patches are available in Ranger Green and Wolf Grey. -
The semi-rigid exterior of the pouch provides additional impact protection for rear accessories and has a central loop for ID patches. It also has a lower storage compartment for PTT cables when not in use. It's securely and securely connected and yet can be put on and off in about 60 seconds, so you can connect or unplug depending on your mission set.- Includes Rear pod + extended bungee cord
- The rear pocket integrates seamlessly with the Mohawk, Mohawk Air and Gen4 Lo-Pro helmet covers.
- Provides mission-specific customizability.
- Securely attached to the helmet with Velcro, Velcro under tabs and milspec bungee cord.
- Provides new advanced functionality and universal accessory management.
- Uses a new versatile rear flex cell that fits all common NVG battery packs and counterweights.
- Has strategically placed outputs for all cables.
- The semi-rigid exterior of the cell provides the rear accessories with additional protection against impact and has a central loop for ID patches.
-
Not in stock - on order
With the AMAP III Conversion Kit you can attach the Agilite AMAP III and other Agilite accessories directly to ANY plate carrier. Agilite-plate carriers are already equipped with the K-Series fastening system that allows you to attach assault packs directly. However, if your department or military unit requires a non-Agilite carrier, the conversion kit can be retrofitted in minutes and makes any plate carrier compatible with Agilite attack suits or hydration systems. After installation, you can put on and take off your Assault pack in seconds. The Conversion Kit is very unobtrusive, so it can be permanently applied to your back carrier or quickly removed when you are not using it. Why would I want to attach my attack pack directly to my plate carrier? By attaching your assault pack directly to your Plate Carrier, you'll be with one grip on your gear and survival system, whether it's out of your cage, your vehicle or from under your bed. When you need to get the HELO or when you're facing a bad guy, you have your Plate Carrier, armor, ammo, helmet, eye protection, supplies, etc. in one graspable unit, reducing your reaction time. It also means that in a firefight, you don't have shoulder pads on shoulder pads, all of which move independently of each other and unnecessarily swell your shoulders and forecloth. All your gear works as 1 unit, and does not hinder your rifle or head manipulation. Details- This allows you to attach the AMAPIII assault pack directly to ANY plate carrier with MOLLE (not just Agilite plate carriers), in seconds
- Consists of 1 central attachment and 2 connecting buckles
- Can be quickly and easily installed on or removed from any plate carrier
- Once installed, you can turn AMAP III on and off in seconds
- Equipped with loop/buckle attachment points to make the wearer Agilite-compatible
- 1 size
- Fits any plate carrier with at least 2 rows of 4 horizontal MOLLE loops (or more)
- Height: 30cm (11.8")
- Width: 15cm
- Depth: 8mm
- 500 Denier Mil Spec Tactical Nylon
- Mil Spec Plastic Hardware
- Fits any plate carrier with 6 horizontal MOLLE loops (or more)
-
**AGILITE JUMP RETENTION TABS™ COME IN A SET OF 3** Say goodbye to the threading/knots of bungee cords and pull tabs that then get in the way. Agilite Jump Retention Tabs™ can be immediately put on and taken off on the Pincer™ Placard and anywhere you have hook & loop. They provide additional rock-solid retention for warehouses or other items during air or other particularly turbulent operations. They incorporate Agilite's patented AG™ polymer pull tab technology so that, even when applied, you can access your magazines unhindered and with one hand. Details- Agilite Jump Retention Tabs™ provide immediate, rock-solid retention of magazines or other items without the need to string or tie bungee cords.
- Optimized for the Agilite Pincer™ Placard, but can also be used with other Placards or equipment with hook and loop
- Attach/remove to any tactical hook or loop equipment in seconds during air or other particularly turbulent operations, so you never lose a magazine.
- Built-in AG ™️ polymer pull tabs for unhindered, one-handed pulling/inserting magazines
- Weight: 0.05 kg
- Hook attachment external, loop attachment internal
-
Agilite AG Mag Pouches are bungee retention pouches that allow you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way. Bungee retention may pouches have been in use for over a decade because of how well they hold warehouses. but they have an inherent, annoying flaw. They make the removal or return of a mag a clumsy, two-convenient, two-motion process because the magazine sticks to the bungeelusjes. This is especially problematic with "tac reloads". AG pouches solve this age-old problem and go from HALO jump-level retention to safety, magazine pulling, magazine re-indexing and back without ever taking your dominant hand off your weapon. We don't believe in taking both hands off your weapon during a firefight, because we come from an environment where time outside the target and outside the weapon when the bullets fly around can easily cost you your life. Sometimes you can't miss that time to intervene again, because by grabbing you have to look down or take your second hand off your weapon. AG pouches use a combination of specially developed polymer pull tabs and various reinforced materials that work together to provide the retention level of closed-top pouches, but the fast pulling ability, without hooks, of open-top pouches. Your equipment should allow you to focus on the threat – it shouldn't bother or annoy you. The custom-made polymer pull tabs allow for both mechanical and friction grip for a perfect grip, with or without gloves. We don't believe in normal just because we've always done something a certain way doesn't mean we can't rethink it and evolve it to provide small but crucial benefits that improve your performance, comfort and safety. Whether you're defending your country on the tip of the spear or defending your family, AG pouches give you a head start. Details- Fits one 5.56 warehouse
- Makes it possible to easily pull and insert the magazine with one hand
- A patented polymer pull tab for exceptional grip
- Reliable retention to never lose a warehouse
- Built-in MOLLE rear mounting
- Tested in battle in Israel
- Smart retention tab meets military requirements without obstructing the entrance to the pouch
- 500D CORDURA® Mil Spec Tactical Nylon
- Laser cut Velcro MOLLE overlay
- Takes 3 MOLLE slots down and 2 MOLLE slots transversely
- Weight: 0.14lbs (0.06g)
- Suitable for one 5.56x45 AR or M4 rifle magazine
- Takes 3 MOLLE slots down and 2 MOLLE slots transversely
-
Not in stock - on order
The Agilite Pincer Pistol Pouch is a MOLLE backpack for a quick-to-pull, low-profile elastic pistol magazine for a single double-stacked 9mm pistol magazine (and other similarly sized items). The magwell's patented funnel-shaped design allows you to grab or re-index a magazine with one hand.- Open-top pistol bags are popular, but have inherent flaws. They are often clumsy, clumsy, noisy or impossible to re-index a warehouse with one hand.
- The Pincer Pouch is lightweight, has a low profile, is quiet and you can put a magazine in it without hitches.
- The Pincer pistol pouch is incredibly versatile, with double-cut laser-cut rear MOLLE to fit perfectly on all combat belts and plate carriers.
- Includes height-adjustable flap to secure smaller items like multi-tools, flashlights and more.
- Works perfectly in combination with the Pincer Placard 2n layer admin pouch
-
The Agilite Pincer Pouch is a MOLLE backed fast-draw low profile elastic mag pouch for a single 5.56 magazine. The patented funnel-shaped magnetic hole design makes it possible to grab or re-index a magazine with one hand. Open warehouse bags are popular, but have inherent flaws. They are often clumsy, clumsy, noisy or impossible to re-index a warehouse with one hand. The Pincer Pouch is lightweight, low profile, quiet and allows you to re-insert a magazine without a hitch. The Pincer Pouch is incredibly versatile, with a laser cut rear MOLLE to fit perfectly on all battle belts and plate carriers. The Pincer Pouch also has a loop on the inside so you can add Agilite Jump Retention tabs if your unit's regulations require it. They feature Agilite's patented AG™ polymer pull tab technology, so even when used, they give you unhindered one-handed access to your warehouses. Whether you're defending your country at the point of the spear, defending your family, or defending your home, Pincer Pouches will give you an edge. Sizing- ONE-SIZE-FITS-ALL
- Fits a 5.56x45 AR or M4 rifle magazine.
- Fits in: A single 5.56 warehouse
- Weight: 3oz (83g)
- Dimensions: 14cm*9.5cm*3cm
- Patented durable polymer magwells
- Laser cut Squadron mil-spec laminate fabric
- Suitable for a 5.56 warehouse
- MOLLE support
- Can be connected to all battle belts and plate carriers
- Quick-draw mag pouch with rock-solid retention
- Patented magnet holder funnels magazines in the pouch, snag-free
- Low profile elastic bag with superior durability and retention
- Proven in Israel
-
With the K19 Back Flap Cummerbund adapter you can attach the Warfighter Cummerbund or other cummerbunds with Velcro to the K19 Plate Carrier (versions 2.0 and 3.0). Attaches to the back of the K19 Plate Carrier via MOLLE. *Plate carrier for illustrative purposes only. -
The Mechanix M-PACT® Agilite Edition is the ultimate tactical glove. It was jointly developed by Agilite and Mechanix as a custom project for Tier 1 Special Forces who wanted the best of all worlds – the protection of a Mechanix M-Pact Covert glove but the tactile capabilities of a fingerless glove. Exclusive to Agilite, the MPACT Agilite Edition is the only glove like this in the world and has been tested and proven by the best of the best. The M-PACT Agilite Edition protects military personnel and law enforcement with EN 13594-rated impact protection. D3O® palm padding dissipates high-impact energy to reduce hand fatigue when fully engaged. The semi-fingerless design adapts to your hand like a full glove, still giving you the dexterity and control of bare hands where you need it most; for your trigger finger, finding a wrist, changing ammo belts, comfortably using smart devices, or other mission-critical tasks. Specs- EN 13594 nominal impact protection.
- Thermoplastic rubber (TPR) closure ensures a good fit on your wrist.
- D3O® palm filling absorbs shocks and vibrations.
- Breathable TrekDry® keeps your hands cool and comfortable.
- Armortex® palm reinforcement.
- Durable synthetic leather palm with touchscreen technology.
- Breathable TrekDry holds.
- Nylon carry loops.
- Co-developed by Agilite and Mechanixwear to meet the requirements of a particular Special Forces unit.
- Available exclusively at Agilite.
- Gives you the dexterity of a fingerless glove but the protection of the industry-leading Mechanix M-PACT® Covert glove.
- Tested and proven by Tier 1 and other agents.
- D3O® palm filling absorbs shock and vibration.
- Semi-fingerless design provides maximum dexterity.
- Breathable TrekDry® keeps your hands cool and comfortable.
- Armortex® palm reinforcement.
- Machine washable.
- Nylon carry loops for storage.
-
Not in stock - on order
- The original Israeli Mitznefet breaks the shape of a military helmet and makes it difficult for enemy snipers to recognize him.
- It is now available in Multicam for the first time.
- Mitznefets are used by the Israel Defense Forces (IDF) and other forces to break the shape of their helmets in the asymmetry of nature.
- The round, precisely cut nature of a military helmet is easily recognizable below range and the Mitznefet not only makes it much harder to identify, providing exceptional camouflage, but also delivers 360-degree shade from the sun.
- When worn without a helmet, the Mitznefet also provides airflow to the head and allows heat to escape, keeping you in the shade, camouflaged and cool in combat environments.
- The Agilite Mitznefet helmet cover is available for the first time in mil-spec Multicam and is equipped with a cord to attach it to your helmet so that it cannot be lost.
- It is fully adjustable to fit all types of helmets and heads and includes mil-spec plastic hardware from ITW Nexus.
- Mil-Spec Nylon Network
- Plastic Hardware by ITW Nexus
- Size: Adjustable - one size for all helmets
- Made in Israel
-
The Agilite Pincer Pistol Pouch is a MOLLE backpack for a quick-to-pull, low-profile elastic pistol magazine for a single double-stacked 9mm pistol magazine (and other similarly sized items). The magwell's patented funnel-shaped design allows you to grab or re-index a magazine with one hand.- Open-top pistol bags are popular, but have inherent flaws. They are often clumsy, clumsy, noisy or impossible to re-index a warehouse with one hand.
- The Pincer Pouch is lightweight, has a low profile, is quiet and you can put a magazine in it without hitches.
- The Pincer pistol pouch is incredibly versatile, with double-cut laser-cut rear MOLLE to fit perfectly on all combat belts and plate carriers.
- Includes height-adjustable flap to secure smaller items like multi-tools, flashlights and more.
- Laser cut Velcro overlapping panels
- Laser cut Squadron™ laminate
- 500D CORDURA® Mil Spec Tactical Nylon
-
- Low-profile general-purpose pouch to store and organize essential items without sagging or flapping
- MOLLE mount on the back (3 MOLLE slots on the front and 3 MOLLE slots on the bottom)
- Pass-through for attachment to all straps
- Built-in shock cord gives you the ability to tie items internally without wobbling or sagging.
- Shock cord also serves as an attachment point for a Tourniquet
- Built-in internal organization, including a loop for attaching velcro inserts.
- Proven in battle in Israel
- Fits in one size
- Can be attached to any MOLLE surface: Occupies 3 MOLLE slots at the bottom and across
- 500D CORDURA® Mil Spec Tactical Nylon
- Milspec WebbingYKK Zippers
- Drainage hole
-
Attaches quickly and easily to the front of the Agilite Pincer™ Placard, giving it a whole new level of organization, storage and capabilities in one compact package.- Features a low profile with easily accessible administration pocket with both internal organization and a loop area for attaching velcro inserts.
- Double side panels with laser-cut MOLLE, perfect for attaching Pincer™ Pistol Mag pouches or other single-column pouches of your choice.
- 2 internal elastic loops on the back, ideal for storing chemlights, trauma scissors, markers, pens and more.
- 500D CORDURA® Mil Spec Tactical Nylon
- Laser cut Squadron™ laminate
- Laser cut Velcro overlapping panels
-
The Agilite AG3 Placard is a bungee retention placard that allows you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way.- Suitable for three 5.56 magazines and can be attached to any plate holder with G-hooks or Placard buckles (both buckles and G-hooks included with the placard).
- Bungee retention warehouse bags have been used for more than a decade because they hold warehouses well, but they have an inherent, annoying flaw. They make removing or returning a warehouse inconvenient, with two hands and two movements, because the warehouse keeps hooking on the bungee tabs.
- AG pouches solve this age-old problem and go from HALO jump-level retention to safety off, mag draw, may re-index and back without ever taking your dominant hand off your weapon.
- The custom-polymer pull tabs also allow both mechanical and friction grip to get the perfect grip, with or without gloves.
- Whether you're defending your country at the tip of the spear or defending your family, AG pouches give you a head start.
- Fits three 5.56x45 AR or M4 rifle magazines.
- The AG3 Placard fits ANY plate carrier and is equipped with both G-hooks and MOLLE buckles.
- 500D CORDURA® Mil Spec Tactical Nylon |
- Laser cut Velcro MOLLE overlay
- Suitable for three 5.56 warehouses
- Height adjustable
- Weight: 0.16 kg
- Including mil-spec G-hooks
- Including mil-spec Polymer MOLLE Placard buckles
- Suitable for three 5.56 warehouses
- Makes it easy to pull or place a magazine with one hand
- Proprietary polymer pull tab for exceptional grip
- Reliable retention to never lose a warehouse
- With hook closure, to be attached to any plate carrier that Placard is capable.
- Proven in battle in Israel
- Smart retention lip meets military requirements without obstructing access to the bag
-
Agilite AG Mag Pouches are bungee retention pouches that allow you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way. Bungee retention may pouches have been in use for over a decade because of how well they hold warehouses. but they have an inherent, annoying flaw. They make the removal or return of a mag a clumsy, two-convenient, two-motion process because the magazine sticks to the bungeelusjes. This is especially problematic with "tac reloads". AG pouches solve this age-old problem and go from HALO jump-level retention to safety, magazine pulling, magazine re-indexing and back without ever taking your dominant hand off your weapon. We don't believe in taking both hands off your weapon during a firefight, because we come from an environment where time outside the target and outside the weapon when the bullets fly around can easily cost you your life. Sometimes you can't miss that time to intervene again, because by grabbing you have to look down or take your second hand off your weapon. AG pouches use a combination of specially developed polymer pull tabs and various reinforced materials that work together to provide the retention level of closed-top pouches, but the fast pulling ability, without hooks, of open-top pouches. Your equipment should allow you to focus on the threat – it shouldn't bother or annoy you. The custom-made polymer pull tabs allow for both mechanical and friction grip for a perfect grip, with or without gloves. We don't believe in normal just because we've always done something a certain way doesn't mean we can't rethink it and evolve it to provide small but crucial benefits that improve your performance, comfort and safety. Whether you're defending your country on the tip of the spear or defending your family, AG pouches give you a head start. Details- Suitable for three 5.56 warehouses
- Makes it possible to easily pull and insert the magazine with one hand
- A patented polymer pull tab for exceptional grip
- Reliable retention to never lose a warehouse
- Built-in MOLLE rear mounting
- Tested in battle in Israel
- Smart retention tab meets military requirements without obstructing the entrance to the pouch
- 500D CORDURA® Mil Spec Tactical Nylon
- Laser cut Velcro MOLLE overlay
- Takes 3 MOLLE slots down and 6 MOLLE slots transversely
- Weight: 0.35lbs (0.16kg)
- Suitable for three 5.56x45 AR or M4 rifle magazines
- Takes 3 MOLLE slots down and 6 MOLLE slots transversely