-
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The Dynamic Combat System (DCS) is a lightweight, unobtrusive system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The DCS can contain large plates at the front and back and has the option to wear side plates "6 x 6" or "6 x 8". NEXUS N.I.J. Level 3a Front, Back and Side Armor can also be used with I.C.W. style plates and for additional protection against I.E.D.s armor carrier, with detachable sides. The shoulders are fully adjustable and have an emergency release on one side, which frees the left shoulder area and allows the operator to remove the rig without taking off his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D Spacer Mesh lining is used for comfort and allows body heat away from the body surface while helping with airflow to cool. The DCS is designed to be worn in conjunction with the Warrior Frag Belt (sold separately). -
Not in stock - on order
Men's elastic and water-repellent softshell material with BWR - Beretta Wind Resistant membrane, 4-fold elastic inserts at key points and microsuède reinforcements on the shoulders. The Windshield shooting jacket is made of Softshell, a fabric with a breathable BWR - Beretta Wind Resistant between the outer dust layer and the inner jersey layer. On the sides and under the sleeves, the fabric is 4-way elastic for maximum freedom of movement; A mesh insert has been found near the armpit to provide breathability. The details of microsuède on the shoulders help hold the gun better, and in the large, expandable double-entry pockets, you can bring all the patterns you need for your recording session. The jacket also has inner pockets for the "Beretta Recoil Reducer", the gel-tech bet that softens the recoil (not included as standard with the jacket). Features- Knitted bomber collar.
- Microsuède shooting plaster with Beretta stitching.
- YKK two-way zipper.
- Large front pockets with double input, expandable with push buttons, fold and reinforcements of microsuede.
- Beretta logo printed on the left pocket in contrasting colour.
- 4-fold elastic fabrics bet on the sides.
- Mesh insertion under the armpit.
- Beretta print on the right sleeve.
- Storm-resistant lycra cuffs.
- Rubber patch with Beretta logo in contrasting color on the back.
- Inner pockets for "Beretta Recoil Reducer", not included in the garment.
-
Not in stock - on order
The new Beretta lightweight goggles comes with the three interchangeable lenses you need most: Black for use in all weather conditions, yellow for fog and low light situations, red for bright days and accentuating clays. The enveloping lenses offer full coverage and are all 100% UVA and UVB certified. The adjustable nose piece ensures a full day of comfortable wearing. Hard clamshell case protects your glasses even at the bottom of your gearbag. Features:- Three interchangeable lenses
- Hard shell case
- Full coverage 100% UVA and UVB
- Adjustable nose piece.
- Beretta logo embossed.
-
Not in stock - on order
Heavy cotton baseball cap. The Beretta Patch Cap is a colorful addition to your shooting outfit. It is made of heavy cotton, with a rubber Beretta logo in contrasting color on the front and the "Beretta Since 1526" embroidery on the back. The brand DNA is highlighted by the presence of an adjustable strap at the back in iconic Beretta shoulder strap colors. Features- Beretta rubber logo
- one size fits all
-
Not in stock - on order
Men's polo of 160 grams comfort piquet cotton 160g with Beretta Competition print. The Beretta Victory Broken Clay Polo is a tribute to the Beretta Shooting Team. It is made of 160 grams of comfort cotton pipe and has several prints on the front, sleeves and back, related to the Beretta Competition World. Features Beretta brand, size and maintenance label in contrast colour printed on the inner collar strap. Polo and T - shirt A series of polo and jersey T-shirts designed on the shooter's movements. From classic materials such as jersey and piquet cotton to the latest Polartec® Delta ™ technology, the Beretta range of polo shirts and T-shirts completes the shooter's outfit. -
The Altama Aboottabad Trail Mid WP (Waterproof) is a rugged trailrunner with tactical properties, starting with the legendary Altama Panama Solen technology. The shape of the Rock 'n' Roll Plate ™ sole offers a pleasant light and effortless rolling, even over long distances. In addition, the cushioning EVA midsole reduces the load on tendons, ligaments and joints. Altama Panama brine technology. With the special SOFROC ™ rubber composition, it offers the best grip on wet and dry surfaces and optimal grip during abseiling. Fast-drying nylon mesh, microfibre PU top material and a membrane construction make the Aboottabad waterproof and breathable. Material Top material: polyamide, polyurethane; Inner lines; 100% polyester, insole: polyurethane; Sole: rubber Details:- Padded shaft and tongue.
- Panama brine technology with SOF ROC ™ rubber.
- Midsole made of two EVA layers.
- Rock 'n' Roll Plate ™ outsole shape for optimal rolling.
- Quick-drying upper of nylon mesh and microfibre PU.
- Cast external rubber nose.
- Preformed internal TPU heel cap.
- Removable Alta-lite ™ PU insole.
- Lacing metal and nylon.
- Waterproof and breathable membrane construction.
- Big pull pan.
- Height shaft: 14 cm.
- Weight: approx. 1024 g / pair (size 42).
-
Not in stock - on order
The Mil-Tec Plate Carrier Vest Gen. II is a ballistic protection plate insert with modular webbing on the front, back and side of the vest. With this plate carrier, the abdominal band can be omitted, resulting in a light and flexible plate carrier that is closed by a belt with a Fastex buckle. Material 100% polyester (Oxford) polyvinyl chloride coated shoulder straps: 100% thermoplastic elastomers Details:- Molle loop system on the front and back, as well as on the side straps
- 3 rubber loops on the front for attaching equipment
- Small pocket with Velcro at the front
- 3 Velcro strips on the front for attaching patches
- Full front opening of the vest with 3 large, strong Velcro closures
- Shoulder straps can be opened with Velcro
- The vest can be quickly put on and off thanks to the elastic band system on the back
- Front and rear plate ceramics level III and IV can be used
- Internal belt holder for ceramic plates 25 x 30 cm.
- Weight: about 930 grams
-
The Original® glove revolutionized the hand protection industry with its versatility and anatomical design. Robust 0.8mm synthetic leather infused with touchscreen technology ensures the perfect blend of agility and durability. Breathable TrekDry® with MultiCam® Black print keeps you cool and comfortable in the field. The Original offers an unparalleled fit, feel and functionality to protect your hands. Intended use- Maintenance & Repair
- Army
- Police
- Sports shooting
- Outdoor adventures
- cycle
- Form-fitting TrekDry® helps keep your hands cool and comfortable.
- Adjustable wrist fasteners made of thermoplastic rubber (TPR) ensure a safe fit.
- Reinforced thumb and index finger improve durability.
- Touchscreen suitable synthetic leather offers the perfect blend of agility and durability.
- Nylon carry loops.
- You can go in the washing machine.
-
A sense of precision and a high degree of agility stand for 0.5 mm palm protection. The Mechanix Specialty FastFit® 0.5mm shooting gloves offer a natural feel and light hand protection in an anatomical design. The 0.5mm AX-Suede™ synthetic leather provides the perfect blend of tactile control and protection in action or at the shooting range. Breathable TrekDry® material adapts to the back of the hand to reduce heat build-up, and expandable flexible joints improve trigger finger mobility for smooth manipulation. material- Synthetic leather palm: 80% polyester, 18% polyurethane, 2% fibers of different or new types of materials (carbon black);
- Hand back: 100% polyester: finger sides: 96% polyester 4% elastane (spandex);
- Thumb side: 100% polyester;
- Inner lining: 100% polyester
- Light TrekDry® adapts to the hand back to reduce heat build-up and sweating.
- Anatomically designed darts adapt to the natural shape of the hand for an accurate fit.
- The elastic cuff ensures a secure fit.
- Expandable flexible joints improve trigger finger mobility.
- 0.5 mm thick, flexible AX-Suede™ synthetic leather provides a sense of precision and optimal dexterity.
- Nylon straps.
- You can go in the washing machine.
-
Not in stock - on order
Condor cap with six panels designed for tactical use. Velcro surfaces for identification of friends and enemies on the front, back and on the top of the hat. Insensitive to creases and creases. Adjustable at the back. Material: 100% Cotton -
Not in stock - on order
The Beretta Trident Dry Cap is made of lightweight and breathable technical material. The cap is flexible and durable enough to be folded without losing shape. Multifield From the outside world to the different hunting environments such as Open Country, Forest, Mountain and Waterfowler, through the various shooting sports disciplines, a range of Multifield products to meet all requirements functions:- Arrangement on the back
- Sweat-absorbing inner tube
- Beretta logo printed on the front
- Composition: 88% polyester, 12% elastane
-
Beretta Stryker Combat Shirt The top and sleeves are made of nylon and cotton ripstop for maximum durability. The body is made of 159 g polartec® Power Grid™ for maximum breathability. The Stryker Combat Shirt can be combined with the BDU Field Pants and the BDU Field Shorts' Training Gear Uniform. The Training Gear Uniform is inspired by BDU's or 'Battle Dress Uniform' used by various armed forces and law enforcement agencies around the world. Details:- Half zipper with YKK zipper
- Pockets with zipper and Velcro on the sleeve
- Elbow pockets for Velcro on the wrist
- Embroidered Beretta logo
- Fit: Slim fit
-
Beretta BDU Field Jacket BDU Field Jacket Beretta "Battle Dress Uniform" made of lightweight and resistant nylon and cotton ripstop. ""Shock absorbing"" elbow protectors (not included) pockets, Canadian buttons, zippered pockets and Velcro closures guarantee maximum functionality. The jacket can be combined with the BDU Field Pants and BDU Field Shorts. Details:- Closure with Canadian knots
- Velcro patches
- Large front pockets with YKK zipper
- Elbow pockets with Velcro
- Velcro control on the wrist
- Embroidered Beretta logo
- Fit: normal fit
-
Beretta BDU Field Jacket BDU Field Jacket Beretta "Battle Dress Uniform" made of lightweight and resistant nylon and cotton ripstop. ""Shock absorbing"" elbow protectors (not included) pockets, Canadian buttons, zippered pockets and Velcro closures guarantee maximum functionality. The jacket can be combined with the BDU Field Pants and BDU Field Shorts. Details:- Closure with Canadian knots
- Velcro patches
- Large front pockets with YKK zipper
- Elbow pockets with Velcro
- Velcro control on the wrist
- Embroidered Beretta logo
- Fit: normal fit
-
Beretta BDU Field Jacket BDU Field Jacket Beretta "Battle Dress Uniform" made of lightweight and resistant nylon and cotton ripstop. ""Shock absorbing"" elbow protectors (not included) pockets, Canadian buttons, zippered pockets and Velcro closures guarantee maximum functionality. The jacket can be combined with the BDU Field Pants and BDU Field Shorts. Details:- Closure with Canadian knots
- Velcro patches
- Large front pockets with YKK zipper
- Elbow pockets with Velcro
- Velcro control on the wrist
- Embroidered Beretta logo
- Fit: normal fit
-
Pentagon Tactical Baseball Cap with velcro patches for friend-enemy identification on front, back and on cap. Six panel cap designed for tactical use. The fixed flap provides good sun protection and the size of the cap can be adjusted with a Velcro on the back. Details:- 6 panels construction.
- Embroidered ventilation holes.
- Preformed peak.
- Size adjustable with Velcro.
- Velcro surfaces for ID patches on the front, back and crown.
- Weight: about 85g
