-
The webbing sleeve that attaches in the Squeeze vest/plate carrier to connect the long spoon to the spoon garage on the combat belt. Weight:30 g Dimensions: 22 x 5 x 1 cm *Additional equipment for illustrative purposes only. Not included. -
Kenmerken: The I-Bar is mounted where you want to attach your backpack, bag or Specialist backpack small. It can be mounted on any backpack, vest or sternum.How to assemble:
- Thread the strap under the strap on the platform where you want it to be.
- The strap should be laced in the direction the buckle should be pointing when attached.
- Pull the strap through the front hole of the buckle
- Pull the strap through the rear hole of the buckle
- Adjust the length of the belt
- Fasten the Velcro
- Pull the buckle to make sure it's secure
- Attach the other buckles you need
- Attach the bag/backpack etc and make sure the buckles are placed in the correct positions
-
The long spoon that connects the spoon garage on the belt to the spoon sleeve in the pinch vest/plate carrier. *Accessories and images for illustration purposes only. Not included. -
This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. It also has a quick-release buckle so you can quickly shed your backpack if you need to. The garage attaches to the combat belt to connect to the Squeeze plate carrier or vest in the inner pocket. The outer compartment connects to the backpack. The connecting piece is the long spoon or/and the curved long spoon. The long and long curved spoons are not included in the double spoon garage 2.0. *Atmospheric images and additional material for illustrative purposes only. -
The tie-down strap that attaches to our 90-130 liter backpacks and connects the long spoon to the double spoon garage on the combat belt. This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. The outer compartment of the double spoon garage 2.0 connects to the backpack with the curved long spoon, which is placed in the adjustable spoon sleeve. *Atmospheric photos and additional material for illustrative purposes only. Not included in the package. -
Two different mechanisms for attaching paper to our sleeves. Both have Velcro at the back. FBM-10B= Is an international 2-hole mechanism. 85 mm between the rings and the rings have a diameter of 40 mm. 50-00019-01-000= Is a Swedish standard mechanism with 4 holes. Color: Olive -
Attach the pouches to the Velcro panel or in the organized bag 4 color-coded zippered pouches to keep medical or technical equipment organized. Small bags: 18x16x7 cm and large bags: 32x15x7 cm 7 cm high sides Velcro on the back to attach the pockets to the Velcro panel in the Specialist backpack small Color-coded to make it easier to find what you're looking for Fits: Anything – medical equipment, technical equipment, or personal items Beware: In the backpack, specialist, small *Content for illustrative purposes only. -
Not in stock - on order
The perfect pouch to quickly put your empty magazines in during a firefight. Also useful for storing gloves, hearing protection, etc. Use it to put evidence or other important things in during a raid Basically, the pouch is designed to temporarily carry things you don't want in your hands Is worn rolled up in the bottom of the vest Pull the large D-ring when needed The drawstring with drawstring closure at the top can be tightened to tighten the opening of the pouch Capacity: 10L Suitable for: 8-10 x 5.56 magazines, earmuffs, gloves etc. Beware: Equipment vest, belt etc. -
The size is easily changed with the elastic cord. Low profile to make it easier to work in an open hatch or in a car. The elastic cord with heat shrink closure at the top is quick and easy to open Low cut for faster removal of the magazine. 25 mm MOLLE straps on the outside so you can attach other magazine bags to the outside. Two or more warehouse bags can be attached outside each other. Eyelet in the soil to let water through. The Tuck in attachment system makes it possible to attach the pouch to any vest or belt. The mounting system is easy to use on standard 25 mm MOLLE/PALS system. Storage compartments: 1 x 7.62 or 1 x 5.56 magazine or radio, pistol etc. Weight:95 g Dimensions: 8 x 11 x 3 cm -
A strong steel hook for a 40 mm wide belt. -
A lightweight bag for your large handcuffs, which keeps them quiet and secure, easy to use and attaches to the equipment belt. The pouch is securely attached to the belt or vest Suitable for normal and large handcuffs Snap fastener with Velcro The Velcro closure makes it possible to close the pouch quickly and easily. The pouch is fully padded to reduce the rattling of the handcuffs and make the pouch as strong as possible The pouch does not absorb water, does not rot and does not soften in the rain The foldable fastening system makes it possible to attach the pouch to any vest or belt. The pouch can be attached to the belt without removing what is already on the belt. Open the fastening straps on the back of the case. Place the pouch on the outer belt. Thread the fastening strap under the horizontal strap on the pouch and close the fastening straps. Fits in: Handcuffs Beware: Service belt, Leg Platform, Equipment Vest and on the belt Weight: 60 g Dimensions: 11 x 11 x 4 cm -
The perfect little bag to dump your empty magazines into during a firefight. Also useful for storing gloves, hearing protection, etc. Use it to store evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things that you don't want in your hands. You wear it rolled up in the bottom of the equipment vest. Pull the square D-ring if you want to open the pouch. Zipper at the top. Accommodates 4 warehouses. Attributes- Article number: 22-00301-56-000
- Weight:160 g
- Dimensions: 24 × 16 × 9 cm
-
The Snigel GP Pouch 3 2.0 has a removable elastic cord and a pull tab to facilitate use. A light pouch for general use to store small objects. The pouch is designed to be light and take up as little space as possible, while remaining strong enough for military use. Elastic band on the pouch to keep the contents safe even when the valve is open. Pull tab on the flap to open it easily, even with gloves on. Velcro flap and pull tab for easy opening The flap can be slid into the pouch and secured with Velcro, making it easier to access the items you carry in the case. Drain hole at the bottom. Thanks to the folding system, the pouch can be attached to any vest or belt. The bag has foldable Velcro straps at the back so that the bag can be worn horizontally on the belt. To wear it vertically, use the quiet and easy-to-use fold back system on the back of the case. This system makes it possible to attach the pouch without removing other pouches from the belt. Capacity: 0,2L Fits: Pepper spray short, short wide flash bulbs, distraction grenades, 40mm grenades, GPS, cell phone Fits: Equipment vest, belt, leg plate or leg mount. -
A very light and waterproof backpack. Packed, it takes up only 2 liters of space. It is completely waterproof with taped seams and a roll closure at the top. Two flat 50 mm wide shoulder straps and one chest strap. Rolled ends on all tires to keep them tight. M7810-116011 KOMBI RYGGBRÄDA T, Kolli 2 Size: 30L. Dimensions: W=27, H=50 & D=18 cm. Weight: 340 g -
A grey and black Snigel patch with the text POLICE. 90 X 25 mm. Velcro on the back, so that the patch can be attached to Velcro surfaces of bags and bags. *Image with stylo illustrating size. -
A grey and black patch with the text PRESS. 260 x 50 mm. Velcro on the back so that the patch can be attached to loop-shaped Velcro surfaces on bags and pouches. -
A grey and black patch with the text MOE for Method Of Entry. 50 x 25 mm. Velcro on the back, so that the patch can be attached to Velcro surfaces of bags and bags. -
The perfect little bag to put your empty magazines in during a firefight. Also good for storing gloves, hearing protectors, etc. Use it to preserve evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things you don't want in your hands. Rolled up in the bottom of the equipment vest, under another pouch it does not take up any space.... Pull the square ring down, naturally, when you want to open the case. Suitable for 4 warehouses. Attributes Weight:100 g Dimensions:4 x 12 x 35 cm Color: Black or Grey -
Not in stock - on order
No stock item. It is made to order and normally has a delivery time of 16 weeks. If you order 50 or more, the price drops, but the delivery time increases to about six months. Pieces can also be obtained separately. -
KEY FEATURES- The case is designed to be as lightweight and take up as little space as possible, while remaining strong enough for military use.
- Velcro closed flap with pull tab on the flap for easy opening even with gloves on.
- Velcro loop on the lid for a small patch.
- The flap can be pushed into the pocket for easier access to the thing you're carrying in the pouch.
- Elastic cord, on the pouch to hold the contents even when the valve is open. The cord can be removed.
- Bottom drain hole.
- Fold back fastening system makes it possible to attach the bag to any equipment, vest or belt.
- It has Velcro straps on the back so that it can be worn horizontally on the belt.
- CAT turnstile
- long 40 mm grenades
- Pepper spray
- Mobile phone
- Lamps
- Multi-tool
- Other objects of similar size
- 21-01855A01-013 Black
- 21-01855A09-013 Grey
- 100% Nylon -FR PU coated
- All fabrics and webbings are IRR compliant.
-
Not in stock - on order
It is designed to carry and protect the Multipurpose pouch medium 10, Olive, but can also be used to wear and protect large lenses or other technical equipment. It has a stiff plastic layer around the sides to protect the contents of the bag. Shoulder strap MOLLE band on the sides Material: Polyurethane coated polyamide fabric Fits in it: NVG, large lens, camera, medical equipment or technical equipment Beware: Over your shoulder or around your waist functions: A simple bag with flap with zipper. Article number: ONVGP-10C Weight: 400 grams Dimensions: 14 × 18 × 23 cm Colors: Coyote Only available in color Coyote. Other colors are to illustrate the model. -
Not in stock - on order
Capacity = 50 litres Fits: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, plug-in optics or personal equipment for 24-48 hours Beware: Can be worn in the hand, over the shoulder or on the back. functions: A sturdy, reliable and versatile backpack for storing and transporting sensitive/sensitive equipment. The backpack can be custom made by the user for radio, first aid, photo kit/surveillance or technical equipment. The bag has a ventilated back with a plastic plate and an aluminum support on the back to make it sturdy but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. They have a chest strap and handset/microphone attachment. Thick padded waistband. The bag is made of wear-resistant coated polyamide and has a sturdy zipper. Long heavy zipper with long drawstrings. The zippers are long so that the backpack can be fully opened. 4 compression straps on the side are sewn to the backpack. The loose ends of the side compression straps roll up and are fastened with Velcro. The bag has one carrying handle on the top. Main compartment has 2 inner pockets with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment. The outer pockets have a zipper and they each have an elastic mesh pocket with zipper on the inside for the different things you need to store. The lower compartment is suitable for 15" field laptop/computer or supplement/replacement clothing. MOLLE webbing to attach bags/bags for first aid equipment, holders for radios etc. are placed on the outside of the outer pockets. An optional medical wall can be mounted with straps in the middle of the backpack. The wall remains vertical when the backpack is open. A man pack radio can be secured with two straps close to your back for the best weight distribution and balance. Two holes for cables or a tube are placed at the top of the backpack in front of the drinking system. Optional set of plug-in bags (65-01290A00-888) is ideal for organizing in the backpack for medical equipment. Optional rain cover in grey (65-01736A09-000) Optional snow cover in white (65-01736A26-000) -
Not in stock - on order
SPEED MAGAZINE POUCH 2.0 The size is easy to change with the elastic cord. Low profile to make working in an open hatch or in a car easier. The elastic cord closure in the top is quick and easy to open Low cut out to remove the warehouse faster. 25 mm MOLLE tires on the outside so you can attach other bags to the outside. Two or more warehouse bags can be attached outside each other. Eyelet at the bottom to leave out water. Tuck-in mounting system makes it possible to attach the pouch to any equipment vest or strap. The mounting system is easy to use on both the standard 25mm MOLLE/PALS system. Storage capacity: 1 x 7.62 or 1 x 5.56 magazine or radio, pistol etc. -
Our latest low profile design, designed for integration of ballistic vest, includes 2 liters in a ballistic vest and 3 liters in a package. Maximum use of low-profile technology reduces the depth of the wearer, making it a truly unobtrusive drinking system. Features- Hi-Flow Storm-Valve: No-bite push-pull valve with integrated shut-off mechanism; easy disassembly for cleaning
- Low Profile: maximum use of low-profile technology reduces the depth of the wearer
- The horizontal blow connector allows the drinks hose to be routed out of the ballistic plate bag without kinking the hose
- Angled valve: rotates 360 degrees for perfect valve/mouth orientation; let the tube become 25 cm shorter; less excess tube bouncing around the chest
- Dirt shield valve cover to protect the nozzle from dirt
- Cool Weave Cover Tube: isolates and blocks UV light; water stays cool and inhibits the growth of bacteria
- Taste-free system: co-extruded PE film retains the pure liquid taste without plastic taste; BPA and phthalate free
- Glassy film with Grunge-Guard technology: Inhibits the growth of bacteria on the surfaces of reservoirs and drinking tubes
- Care-Free: cleaning by simply rinsing the system and hanging it dry (if used with water)
- Widepac closure: patented sliding closure for easy tapping and cleaning; airtight seal
- QMT hose/reservoir connector with seal ensures quick and leak-proof removal of the bladder to refill it
-
Modular drinking system, works where rear mounted systems often do not. Exclusive 3-layer constructed polyethylene construction with Taste-Free ™, low-maintenance Glass-Like ™ lining. Integrated antimicrobial Grunge-Guard ™. Features- Foldable canteen, empty foldable, filled upright
- Hi-Flow Storm-Valve: No-bite push-pull valve with integrated shut-off mechanism; easy disassembly for cleaning
- Angled valve: rotates 360 degrees for perfect valve/mouth orientation; 25 cm shorter tube and less excess tube bouncing around the chest
- Dirt shield valve cover to protect the nozzle from dirt
- Cool Weave Cover Tube: isolates and blocks UV light; water stays cool and inhibits the growth of bacteria
- Taste-free system: co-extruded PE film retains the pure liquid taste without plastic taste; BPA and phthalate free
- Glassy film with Grunge-Guard technology: Inhibits the growth of bacteria on the surfaces of reservoirs and drinking tubes
- Care-Free: cleaning by simply rinsing the system and hanging it open until dry (if used with water)
- Widepac closure: patented sliding closure for easy tapping and cleaning; the airtight seal
- Gray snake.
-
Back-worn/vest-loaded modes: Quick release shoulder straps that can be used to attach the system to MOLLE straps on your vest. The Low profile drinking backpack, specially designed for ballistic vest integration. Maximum use of our low-profile technology reduces the depth of the wearer, making it a truly unobtrusive drinking system. External filling port - Quick and easy refilling without spilling. MOLLE strap on the outside. NOTE: Only the cover is included with the product, not the bladder, hose or mouthpiece. Weight: 50 grams Dimensions: 35 × 28 × 1 cm CategorySource®: hydration Color: Black, Grey -
Not in stock - on order
An overjack designed for the operator with an emphasis on camouflage and camouflage. The use of this jacket will significantly reduce your visual and thermal signature Very good visual camouflage Limited thermal radiation camouflage (NIR) Front closed with push buttons Flame retardant A ghillie jacket designed for the operator to be used outside the normal jacket or in hot weather outside a shirt can be worn outside the vest of the equipment Material Flame retardant polyester mesh Beware: Outside the equipment vest -
Snigel GHILLIE CLOAK -14 A lightweight camouflage net that works well with your wearer and reduces your visual and to some extent your thermal signature. To be used as a jacket or as a camouflage net. If you move, you wear it like a jacket and if you go static, you can use it as a camouflage net. The garnish (leafy patches) is sewn so that they do not get stuck in the vegetation when you move with the mantle on. At the edge of the mantle, loops are sewn flat to minimize the risk of them sticking in branches. The back of the cloak is printed in a dessert/mountain colors. Packed the volume is only 2 liters. The mantle is made of a flame retardant polyester mesh that does not suck up water and therefore does not get heavier in the rain. Dimensions: 120 x 150 cm -
Suitable for: MP5 or something. Shotgun. Also carbines like M4 or something like that Beware: The kit vest or belt Features:- The holder keeps an extra weapon tight and at your fingertips
- Attached to the side of our equipment vest
- The weapon is fastened with the semi-rigid strap and Velcro that sits tightly around it
- It is normally used to attach a shotgun to open the door
- A shotgun, MP5, other machine guns and carbines can be secured with it
- Must be used together with a sling
-
Not in stock - on order
- If you really want to carry your little gun hidden, this is a good option.
- Works for right- or left-handed users.
- Suitable for a small gun.
- Padded with 3D spacer lining to be as comfortable as possible.
- Wear it under your pants.
- Elastic waistband with Velcro closure.
- Holder for a spare warehouse.
-
Material: Polyamide and steel Applications: People in handcuffs who are not allowed to run away Beware: Most pouches, but the best in the carrier bag Features:- A sling to prevent apprehended people from running away
- Strong tires and buckle
- The buckle opens the "wrong" way to make it harder for the prisoner to open it
- Used in combination with handcuffs
- Easy and quick to attract
-
Fits: Most weapons in 9 mm, 7.62 or 5.56 mm Beware: On the body or on the equipment vest Features:- A very comfortable, flexible, quickly accessible and safe carrying system for your weapon
- With vest fastening to the weapon can be worn to the vest. You avoid the uncomfortable strain on your neck that you get from a regular gun belt
- The long pendulum like an ordinary weaponling
- The long pendulum is attached to the vest
- The weapon is firmly stuck in the pendulum
- The standard hooks on your weapon are used
-
The Duffel Bag from SnigelDesign is a carrying case and backpack in one. The padded handles also serve as shoulder straps so that the duffel can also be worn on the back. The main compartment has a wide opening and a light coloured inner coating so you can look closely at the inside of the bag. The two zippered side pockets are designed so that you can store a helmet in them. If you don't use it, it can be folded up to save space. The 55L duffel bag is generally accepted as hand luggage. Material 100% polyamide 600D; No.10 YKK® zippers; Duraflex® closures and buckles. Details:- Padded shoulder straps with fast-circuiting.
- Reinforced handles at the ends.
- Large main compartment with 2-zipper, zippered inner pocket and 2 Velcro surfaces for attaching additional equipment.
- Very large opening and bright inner coating making it easy to see the inside of the bag.
- Two side pockets with 2-way zipper that are large enough for a helmet.
- No.10 YKK® zippers with zipper aids that can be easily grabbed even with gloves.
- Three clear ID slots.
- Velcro surface for ID patches.
- IRR coating to reduce ir signature (stone grey olive green).
- Flame retardant supermaterial according to the specifications of the Swedish Armed Forces (stone grey olive).
- Capacity: 55 litres.
- Dimensions: ong. 28 x 31 x 65 cm.
- Weight: about 795 grams.
-
A very comfortable, flexible, quickly accessible and safe carrying system for your weapon With vest attachment on the vest, the weapon can be worn on the vest with this single point attachment. You avoid the uncomfortable load of your neck that you get from a regular rifle slinger. Weight: 90g Dimensions: 4 x 40 cm Fits in: Most weapons in 7.62 or 5.56 mm Beware: In the vest attachment (RSWA-09) -
Weight: 100 g Dimensions: 25 x 25 x 25 cm Fits in: All rifles Fits on: Hang it in a carbine in the loop Features:A light weight and stable pillow that gives good support when shooting indoor or outdoor-
It only weighs 100 g
-
The pillow, which is filled with foam beads gives very good support for the lower arm
-
A big loop is sewn on one side of the bag for attaching to the outside of a vest or pack
-
Perfect to use a field support for photography
-
-
Not in stock - on order
A string with emergency release buckle in the back to carry a identity card or similar. Our wallet can also be carried in it. Dimensions: L=80 cm. -
Not in stock - on order
- A versatile support pillow for snipers.
- You can shoot in all directions.
- Soft in the top and solid in the bottom.
- Friction fabric on the top that keeps the gun in place.
- Tension straps hold the cover in place around poles and on other surfaces.
-
A gray and black patch with the text MOE for Method Of Entry. 50 x 25 mm. Hook Velcro at the back so that the patch can be attached to bags and pouches on Velcro surfaces. -
Not in stock - on order
Duffel bag and backpack in one. The padded handles work as shoulder straps as well. A very large, zippered opening for easy access and overview of the main compartment. Two side compartments in the ends makes it easy to organize the packing, and are large enough for your helmet. One zippered smaller compartment inside the flap for equipment that you wish to tuck away. One grab handle in each end. Three windows and one large Velcropatch for patches. Loop Velcro fabric on parts of the interior where you can attach our insert pockets to get extra organized. Weight: 1000g Dimensions: H= 32 W=43 & L= 87cm Volume: 120L -
Not in stock - on order
A very, very large roller bag for all your gear and some more.
One large side pocket with inside compartments. Expandable with 50 extra liters in the top, making into a 230L black hole for storage. A pull handle in each end to make it easy to pull it out of a car or other storage place. Large heavy duty wheels that can be changed if they are broken. Three windows for owner information, Velcro patch for unit patches. Large U-shaped flap that can be opened and all the inside is exposed. The flap can be used to stand on, to protect your feet when changing clothes. The flap can be fully opened so you can stand on it when you change clothes. Hole bands on the outside where you can attach our Duffel straps, so extra equipment can be lashed on the outside. The inside is covered with Velcro fabric so insert pouches can be attached. Two inside zippered compartment. The inside is supported by a plastic frame to permanently keep the bag upright, so it is easier to work with. Reinforced bottom with plastic skids and feet. Size: 180L, expanded 230L. Dimensions: L=85, H=45 & H=45 cm. Weight: 5800 g -
Weight: 3300 g Dimensions: W=25, L=50 & H=35 cm Volume: 45L Fits inside: Most things, CSI equipment, Technical equipment, Medical equipment or all the equipment an investigator needs to carry, including ballistic vest. Fits on: Can be carried in the hand, over the shoulder or on your back. Features:The bag you use to keep all your tools in a good order, ready to use directly.-
One large compartment with Velcro stripes to attach moveable walls.
-
One large top compartment with elastic bands.
-
Two side pockets with inside compartments that can be removed or carried on a belt.
-
One large front pocket with inside compartments that can be removed or carried on a belt.
- Holder for the outside pockets on the top of the bag.
- Padded shoulder straps that can be used to carry the bag as a backpack or as a shoulder bag.
-
Removable walls that can be configured to suit your equipment.
- Hard plastic and soft foam in all sides of the insert to protect the sensitive equipment inside.
- Padded handles.
- Light colored inside to make it easier to find what is in the bag.
- Velcro stripes inside the bag and flap so you can attach our insert pouches.
- Velcro patches on the outside for your unit and personal patches.
-
-
Weight: 3 kg Dimensions: L= 62 cm, H= 35 cm, W= 20 cm Fits in: G36, M4, C8, AK5, HK53, pistol, radio,magazine/clip, weapons cleaning material Fits on: Can be carried in the hand, over the shoulder or on the back Features:A covert, light, safe and flexible bag for storage and transport of sensetive personal equipment.The idea is that all sensetive equipment is stored in the bag and that it can be locked away as one piece of luggage. This gives you full controll over your sensetive equipment- Does not absorb water so does not get any heavier in rain
- The bag is made from hard wearing/durable polyamide coated fabric and is padded with 20 mm plastic foam and protected with 1 mm rigid plastic. The bag is lined with a light coloured material on the inside which makes it easy to clean and to find things inside as most weapons and accessories are black
- The opening is zipped and with velcro band so that the bag is well sealed when closed
- There are two windows for owner identification on the bag, one each on the top and one of the ends
- The bag has two carrying handles and one shoulder strap with padding. A concealed backpack carrying system is behind the back plate for when you need to use both your hands
- The bag is descreet as it does not resemble a weapons bag
- Under the back panel there is a concealed backpack carrying system when you want to use the bag as a backpack
- The bag has two main compartments that each can accommodate one weapon - MP5 or Automatic Carbine
- Many internal compartments for magazines/gun clips, radio, pistol, accessories etc.
- The partitioning wall that divides the main compartments has several receptacles for magazines/gun clips, weapons cleaning kit and other accessories. The wall is secured with velcro bands and can be removed from the bag to make space for larger items
- Large outside pocket with inner compartment for pistol and radio with accessories is padded with 5 mm foam to protect its contents
- The lid can be opened all the way with two parallel zippers. This makes it easy to get to the contents of the bag
- The handles can be connected with a padded piece of fabric and velcro
- The shoulder strap is detachable
-
Weight: 4,6 kg Dimensions: L= 98 cm, H= 36 cm, W= 20cm Fits in: HK416, G36, M4, MP5, pistol, radio,magazine/clip, weapons cleaning material Fits on: Can be carried in the hand, over the shoulder or on the back Features:A covert, light, safe and flexible bag for storage and transport of sensetive personal equipment.The idea is that all sensetive equipment is stored in the bag and that it can be locked away as one piece of luggage. This gives you full controll over your sensetive equipment.- Does not absorb water so does not get any heavier in rain
- The bag is made from hard wearing/durable polyamide coated fabric and is padded with 20 mm plastic foam and protected with 1 mm rigid plastic. The bag is lined with a light coloured material on the inside which makes it easy to clean and to find things inside as most weapons and accessories are black.
- The opening is zipped and with velcro band so that the bag is well sealed when closed.
- There are two windows for owner identification on the bag, one each on the top and one of the ends.
- The bag has two carrying handles and one shoulder strap with padding. A concealed backpack carrying system is behind the back plate for when you need to use both your hands.
- The bag is descreet as it does not resemble a weapons bag.
- Under the back panel there is a concealed backpack carrying system when you want to use the bag as a backpack.
- The bag has two main compartments that each can accommodate one weapon - MP5 or Automatic Carbine
- Many internal compartments for magazines/gun clips, radio, pistol, accessories etc.
- The partitioning wall that divides the main compartments has several compartments for magazines/gun clips, weapons cleaning kit and other accessories. The wall is secured with velcro bands and can be removed from the bag to make space for larger items.
- Large outside pocket that can be folded out and used as a ground cloth when you clean your weapon. It has inside compartments for pistol and radio with accessories is padded with 5 mm foam to protect it's contents.
- The lid can be opened all the way with two parallel zippers. This makes it easy to get to the contents of the bag.
- The handles can be connected with a padded piece of fabric and velcro.
- The shoulder strap is detachable.
-
Weight: 1,2 kg Dimensions: 54 x 34 x 11 cm Fits: Cameras, video cameras, lenses, memory cards, accessories, charger, batteries, pencil, paper etc. Fits on: Can be carried in the hand, over the shoulder or inside the specialist backpack medium/40L Features:An insert for the cameras, video recorders and other optical or sensitive equipment that can be carried on its own or in the Specialist Backpack-medium- Removable walls that can be configured to suit your equipment
- Hard plastic and soft foam in all sides of the insert to protect the sensitive equipment inside
- The outside has a zipped compartment for papers and pens and can be used as a "table" in a surveillance operation
- The flap can be removed and attached to the Specialist Backpack-medium for easier access
- 6 zipped compartments for memory cards, cleaning equipment etc are placed on the inside of the flap
- Padded shoulder strap with snap hooks
- 2 handles
-
Not in stock - on order
Weight: 700 grams Dimensions: 32 x 28 x 8 cm Fits on: cameras, video cameras, lenses, memory cards, accessories, charger, batteries, pencil, paper etc. Fits on: Can be carried in the hand, over the shoulder or in the multifunctional bag Features: An insert for the cameras, VCR's and other optical or sensitive equipment that can be carried alone or in the Specialist Backpack-small / 25L. Removable walls that can be customized to your equipment. Hard plastic and soft foam on all sides of the insert to protect the sensitive equipment inside. On the inside of the valve are 4 zippered pockets for memory cards, cleaning supplies etc. 2 handles. -
Weight: 900 grams Dimensions: 43x 28 x 10 cm Fits on: cameras, video cameras, lenses, memory cards, accessories, charger, batteries, pencil, paper etc. Fits on: Can be carried in the hand, over the shoulder or in the multifunctional bag Features:- An insert for the cameras, VCR's and other optical or sensitive equipment that can be carried alone or in the Specialist Backpack-small / 25L.
- Removable walls that can be customized to your equipment.
- Hard plastic and soft foam on all sides of the insert to protect the sensitive equipment inside.
- On the inside of the valve are three zippered pockets for memory cards, cleaning supplies etc.
- A handle.
-
Military Trauma and Blood-Clotting Wound Dressing- The EB is based on the traditional 4-inch military personal field bandage and is designed to treat a variety of wounds, from small to life-threatening wounds.
- The built-in, patented pressure applyer can apply more than 30 pounds of pressure directly to a wound.
- The locking rod, which secures the Wrapping Leader in a simple, quick and familiar movement, can also be used to apply extra pressure to a site of the wound.
- Other unique features include the Stop & Go detachment, which allows the bandage to be applied in a controlled manner without risking it unraveling, and the Handle Loop, a wrapping leader fold next to the bandage pad that allows the dressing pad to be properly opened and positioned at the site of the wound.
- When installing yourself, the grip loop facilitates correct bandaging - even with one hand.
- The bandage is double vacuum packed to ensure integrity and sterility, while opposing tear notches on the outer packaging facilitate opening.
- Article: 26-00143-09-000
- Weight: 90 g
- Dimensions: 10 x 6 x 4 cm
-
Not in stock - on order
For 2x 9 mm magazines or flashlights or similar objects. The holder has an open able bottom so objects with different lengths can be carried. The holder has hook Velcro on the back that attaches to the loop Velcro in the magazine pouches of the Plate carrier, Strap on DF -12/13 or the dual or triple- magazine pouch. It can also be attached on our other products with a Velcro loop panel. Dimensions: H=10, W=7 & D=1 cm. Weight: 18 g
