-
A light weight, easy to adjust and tight fitting equipment vest with many features. A 15-20 cm wide elastic size adjustment in the back. MOLLE webbing on the front, sides and back for pouches. 2 large front pockets with zipper closure. Padded adjustable shoulders. Cable routing from the back to the front. Elastic loops on the shoulders for hydration tube or radio wires. Hydration system compartment in the back pocket. Velcro patches on the front and back for name and unit patches. Four sizes: 1= 85-100 cm waist 2= 95-110 cm waist 3= 100-120 cm waist 4= 110-130 cm waist Weight Size 1: 470 g, Size 2: 500 g, Size 3: 530 g, Size 4: 640 g -
An ergonomically designed belt to improve your comfort when you carry a heavy load Weight: 450 g Fits: All pouches and holders Fits on: Everybody Features:-
Inner and outer belt construction
-
Ergonomically shaped to fit around the body and hips
-
Non slip inside to minimize the pressure required to keep the belt up
-
Padded inside belt for comfort
-
Three point security buckle, prevents unwanted opening
-
Outer safety strap for added security and to hold gloves
-
Channel for cable ties
-
Velcro to attch on your current pouches and holsters is supplied with the belt
-
XSmall: 65-93 cm
-
Small: 75-103 cm
-
Medium: 85-113 cm
-
Large: 95-123 cm
-
XLarge: 105-133 cm
-
XXLarge: 120-148 cm
-
-
An evolution of the classic balaclava, with a strong mesh over mouth and nostrils, allowing you to breathe freely - even during strenuous tasks - while still providing protection. Lightweight and thin enough to wear under a helmet, as protection from wind and cold, but airy enough to wear in warm weather. The Annaclava is cut long to cover the entire neck well. Flatlock seams for more durability and comfort. Use it as a hat by putting the excess material in the hat. Material: 59% Modacrylic/29% FR Polyester/9% Cotton/3% Elastane -
Not in stock - on order
A padded pouch with drawstring closure. Thick fleece on the inside for protection. Can be used to store sensitive equipment such as night vision goggles. Fits in our Small Oyster pouch.- Weight: 38 g
- Dimensions: 23 x 17 x 2 cm
-
Not in stock - on order
A very light and tight harness for minimal wearing of secret equipment For 1 radio, 1 CS spray can and a telescopic batong The harness is small and thin and is worn in such a way that it is not visible when using an open jacket or shirt The harness is comfortable despite the narrow shoulder straps. The back strap and straps relieve your neck. You can put all your gear in the harness instead of in your trouser and jacket pockets. All your equipment is stored in one place and is easily accessible. The harness is easy to put on and take off The back strap prevents the harness from sliding forward A microphone can be attached to the shoulder strap Fits in: Radio, OCspray and telescopic baton Beware: One size fits all -
A grey and black patch with the dog's head and the text K9. 70 mm. Velcro on the back so that the patch can be attached to Velcro surfaces of bags and pouches. -
Has a removable elastic cord and a pull tab to facilitate the use of the pouch- A tight general pocket to store small objects.
- The pouch is designed to be as lightweight and space-free as possible, while remaining strong enough for military use.
- Velcro closed flap with pull tab on the flap for easy opening even with gloves on.
- The flap can be pushed into the pocket for easier access to the thing you're carrying in the pouch.
- Elastic cord, on the pouch to secure the contents, even when the valve is open. The cord can be removed.
- Bottom drain hole.
- Fold back fastening system makes it possible to attach the bag to any equipment, vest or belt.
- It has Velcro straps on the back so that it can be worn horizontally on the belt.
- It fits: Pistol magazine, multitool, flash light or other similar objects.
-
The adjuster makes it easy to adjust the size of the equipment strap when changing from heavy winter clothing to light summer clothing Attach it to the right side of the belt and then thread it through the buckle The buckle is still on the left side and you use the belt as you are used to The safety belt is used as usual on top of the adjuster Dimensions: 22 x 5 Beware: 50 mm equipment straps -
The Snigel light combat belt is a lightweight, comfortable and slim strap for your first gear. Features- Padded belt with 2 MOLLE webbing sewn on the outside for a comfortable wearing of any type of pocket or holster.
- The MOLLE webbings are sewn on 8 cm wide MOLLE panels, with slots between the panels so that: the inner tube can be woven on the inside; or outdoors, depending on whether you want MOLLE mounting or belt mounting for holsters and other accessories.
- Remove the inner tube and use the riggers strap to combine the functions of both straps.
- On the inside of the belt, Velcro loop stripes are sewn to match/connect with a belt with Velcro on the outside.
- Four loops are sewn into the top of the belt so you can attach a harness or suspenders if necessary.
- The foam/1mm HDPE padding can be removed if you want an even slimmer strap.
- 100% polyamide PU-coated fabric.
- 100% polyester webbing
- 100% polyethylene foam and plastic plate.
- 13-01897A09-001 - 0H-J (XS/S): 82-120 cm
- 13-01897A09-002 - K-M (M/L): 94-132 cm
- 13-01897A09-003 -N-P (XL / XXL): 106-148 cm
-
A 50 mm wide belt that can be used in many ways. To wear any pouch around your shoulders or waist. Like a hip belt on backpacks. As a light combat belt. A 40 mm garter oiler. 50 mm band and 25 mm tyres with 40 mm wide MOLLE openings, vertically on one side of the 50 mm band and horizontal on the other. A double adjustable buckle on the side closes the sling. -
Weight: 1900 grams Dimensions: B = 39 cm, H = 58 cm, D = 23 cm. Capacity = 40 litres Suitable for: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, insert optics or personal equipment for 24-48 hours Beware: Can be carried in the hand, over the shoulder or on the back. Suitable for tactical and ballistic vests. Features: A solid, reliable and versatile backpack for storing and transporting sensitive/vulnerable equipment. The backpack can be custom-made by the user for radio, first aid, photo kit/ surveillance or technical equipment. The bag has a ventilated back with a plastic plate and an aluminum support at the back to make it sturdy but customizable. Shoulder pads are made of plastic foam for comfort and an even balance of weight. They have a chest strap and attachment for handset/microphone. The shoulder pads can be stowed behind the back plate and you can then use the backpack as a shoulder bag and a compression strap on the side can then be used as a shoulder strap. The bag is made of hard-wearing coated polyamide fabric and has a sturdy zipper. Long solid zipper with long drawstrings. The zippers are long so that the backpack can be fully opened. On the backpack are 4 compression straps sewn on the side. The loose ends of the compression straps on the side roll up and are fastened with Velcro. The bag has two carrier handles, one on the side and one on the top. Main compartment has 2 inner pockets with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment. The outer pockets have a zipper and they each have an elastic mesh pocket with zipper on the inside for the different things you might need to store. The bottom box is suitable for 15" field laptop/computer or supplementation/replacement clothing. Modular tires to pouches/bags for first aid equipment, holders for radios etc. To be attached are placed on the outside of the outer pockets. An optional medical wall can be attached with straps in the middle of the backpack. The wall remains vertical when the backpack is open. A manpack radio can be fastened with two bands close to your back for the best weight distribution and balance. At the top of the backpack are two holes for cables or a tube for the drinking system. Access openings for radio or computer cables are placed on each side at the bottom of the backpack. The cable for the wireless microphone is guided through the access hole in the lower part of the backpack and then the microphone is attached to the shoulder piece. The identification of the owner can be written on the Velcro. The backpack is suitable for carry-on dimensions. -
This insert fits in the Snigel Trauma Pouch -17 and facilitates keeping all contents in order. Three 5 cm wide elastic attachments, a net pocket and two plastic covers for e.g. trauma cards (TCCC) or instructions. By pulling the Velcro, the insert is detached in one operation and ready for use. Please note that medical equipment is sold separately. -
A small, lightweight, safe and flexible pouch for your first aid kit- The bag is closed with Velcro. Pull the strap to open the pouch (can be used with gloves).
- You can attach the pouch to all our carriers. It can be attached with the flap up or down.
- The bag does not absorb water and does not gain weight in rain
- The eye in the bottom of the bag may oms water
- The fastening system with snaps makes it possible to attach the pocket to any equipment vest or belt
-
Weight: 10 g Dimensions: L= 7 & W= 2,5 Fits in: Gloves Fits on: The equipment belt Features:An elastic glove keeper to carry gloves on the belt-
Fits most gloves
-
Threads onto the equipment belt
-
Velcro closure
-
Light weight
-
-
This telescopic baton holder can be attached vertically or horizontally to our equipment belt or equipment vest. It can also be worn hidden on your belt. Fits most telescopic batons. Large opening in the top for easy insertion of the baton after use. Elastic loop to secure the baton. The bottom has an opening to insert an extended baton. The opening can be closed with a flap with push button. Fold-back fastening system makes it possible to attach the pouch to any equipment vest or belt. Dimensions: L= 20, B= 5 & D= 6 Fits in: Telescopic baton Beware: Equipment vest, belt, leg plate or leg attachment -
A padded belt with 2 MOLLE bands sewn on the outside for a comfortable carrying of any type of pouch or holster. The MOLLE bands are sewn on 8 cm wide panels with slots between the panels. The inner belt can be placed on the outside of one or more panels so a pistol holster can be worn. An inside 25 mm band is sewn under the panels, use it to attach a leg panel if you need to. It prevents the band from the leg panel from blocking other pouches on the belt itself. On the inside of the belts foam ridges are sewn to improve ventilation and comfort. They also make the belt fit snugly on the body. In the top of the belt, loops are sewn so you can attach a harness or similar. Ballistic panels can be inserted inside the belt. Remove the waist band and use the riggers belt to combine the features of both belts. A 3 point security buckle, prevents unwanted opening. The belt adjuster can be used on this belt.- Weight: 500 g
- Small: 76-105cm
- Medium: 85-115 cm
- Large: 95 -125 cm
- XLarge: 105-135 cm
-
Not in stock - on order
Mechanism for attaching paper in our sleeves. Have velcro at the back. FBM-10B= Is an international 2-hole mechanism. 85 mm between the rings and the rings have a diameter of 40 mm. Color: Olive -
A cool T-shirt with our logo on the chest and on the left sleeve. Grey= 60% Cotton/40% Polyester Olive= 100% Cotton *Note: Images are T-Shirts in Navy and Grey. -
Not in stock - on order
A very light and tight belt with integrated compartments for secretly carrying equipment. Two layers of elastic keep your equipment safe and tight against the body. Stores communications equipment, baton, tear gas spray, pistol magazines, 5.56 magazines, a flashlight and other supplies for surveillance and security operations in 12 compartments. The bottom of each compartment can be opened with Velcro. Detachable plastic gun holster makes it easy to holster your gun. Velcro closed front. Adjustable elastic cord at the back. One size fits all Black only Weight: 400 grams Dimensions: 125 x 12 x 3 cm *No strap capacity included. -
A grey and black Snigel patch with the text POLICE. 250 x 50 mm. Velcro on the back, so that the patch can be attached to Velcro surfaces of bags and bags. -
Not in stock - on order
This is a shorter replacement version, 75 cm long, of the regular backpack strap. (The regular belt is 83 cm long). The belt can also be used for our specialist backpacks. Attributes- Article number: 26-00910-09-001
- Weight: 500 g
- Dimensions: 100 x 14 x 2 cm
-
12 mm flexible, ergonomic polyethylene knee pads. The pair of knee pads sits in the pockets on the inside of the pants, with the ribbed side facing inwards, to protect the knees. The text "This side towards the enemy" is placed on the outside of the pants. Holes have been punched into the knee pads to increase ventilation, making them cooler in hot weather. The lower part of the pads can be cut off to adjust the height so that it ends up on the knee when you kneel. The knee pad can be used in the Snigel combat pants Article number: 00-201669A01-000 Weight: 40 grams Dimensions: 25 x 18 x 2 cm -
An A4 paper storage and carrying case. Internal compartments for pencils, papers and other administrative items. Internal window box for cards or paper. Water repellent and strong to protect the content. MOLLE tires and Velcro at the front. Handle at the top. Size: A4+. Internal compartments for laptop charger and mouse. Internal compartment for a laptop. Outer compartment with zipper at the back. -
Not in stock - on order
A tarpaulin, fully waterproof and breathable with a taped hood Hood with elastic cord and cord lock, Loops to attach a string when used as a personal tent/tarp. Perfect to make a shelter for one or two people. Also good to experience observation posts. Dimensions: 200 x 300 cm Suitable for: 1 person with backpack EAN: 7332673303076 Weight: 740 grams Dimensions: 10 x 10 x 10 cm Category Miscellaneous products Color: Swecam -
This is a perfectly hidden holster, adjustable for both gun and gun with a lamp. It's worn in your belt. It can also be used if you normally carry a gun in the equipment vest or on the belt. There are often situations where you have to take them off, where do you put your gun? Our solution is this holster that is small and quite soft. When you need to reduce your profile, or e.g. walk around the camp, but don't wear the standard holster, this holster is a natural way to carry a gun. The holster is semi-soft and can be worn without a gun, without discomfort under the equipment vest or belt. Works for both right- and left-handed shooters. The height of the gun is adjusted with a belt to adjust the length, allowing you to get it exactly the way you want it. Seat belt for thumb unlocking. Sig226, Glock 18/17 or similar pistols with or without flashlight fit in. -
Not in stock - on order
A minimalist solution with a lot of functionality per gram! An innovation by Anton Matsson. The harness is easily attached to the object you want to wear and is usually used in two different types of configurations. To adjust the length of the strap, the line is simply tied off. In the backpack configuration, an object is attached at two points, this could be a second weapon system or a chainsaw for example. In this configuration, a jacket or sweater may have been changed to a temporary backpack. In the suspender configuration, the lines are interwoven and placed on your back. In this configuration, an object is attached by a point in the top, this can be a pair of gas canisters or water jugs, ammunition holders or a stretcher. For most applications, the lines are usually directly connected to the object. To the pendulum points of the weapons system, for example. Fix it, wear it or drag it! -
Weight: 3300 g Dimensions: W=25, L=50 & H=35 cm Volume: 45L Fits inside: Most things, CSI equipment, Technical equipment, Medical equipment or all the equipment an investigator needs to carry, including ballistic vest. Fits on: Can be carried in the hand, over the shoulder or on your back. Features:The bag you use to keep all your tools in a good order, ready to use directly.-
One large compartment with Velcro stripes to attach moveable walls.
-
One large top compartment with elastic bands.
-
Two side pockets with inside compartments that can be removed or carried on a belt.
-
One large front pocket with inside compartments that can be removed or carried on a belt.
- Holder for the outside pockets on the top of the bag.
- Padded shoulder straps that can be used to carry the bag as a backpack or as a shoulder bag.
-
Removable walls that can be configured to suit your equipment.
- Hard plastic and soft foam in all sides of the insert to protect the sensitive equipment inside.
- Padded handles.
- Light colored inside to make it easier to find what is in the bag.
- Velcro stripes inside the bag and flap so you can attach our insert pouches.
- Velcro patches on the outside for your unit and personal patches.
-
-
Weight: 150 g Fits out: Most machine guns in 7.62 or 5.56mm Looks up: On the body Features: A quickly adjustable and comfortable strap for the machine gun Ergonomic shape. Is attached to the machine gun with two carbine hooks. A padded strap with mesh for more comfort. Quickly switch between marcheer mode with a short band or shooting mode with a long band with a jerk on the tow lip on the buckle. -
Adhesive patch with the flag of Sweden. -
Not in stock - on order
A traditional backpack with flap.- Zipper compartment in the valve.
- Elastic cord on top of the flap.
- Shoulder pads are made of foam plastic for comfort and even weight balance. They have a chest strap and attachment for handset/microphone.
- The shoulder pads can be removed.
- A ballistic plate or hydration bladder can be worn in the compartment in the back compartment.
- Run-up / closure in the main compartment keeps snow and dirt out.
- 2 removable MOLLE straps on the back of the backpack, where more bags can be attached.
- Velcro for identification patch.
- Band and elastic band for microphone for the section radio.
- The backpack can be attached to the back/top of our vests and board carriers.
- Roll up the ends of all the straps to keep them tight.
- Size: 30L.
- Dimensions: B = 27, H = 46 & D = 16 cm.
- Weight: 1100 grams
-
Not in stock - on order
A classic backpack with flap. The flap has a zippered box and an elastic cord at the top. The bag has a back with a plastic plate and an aluminum support at the back to make it sturdy but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. It has a chest strap and attachment for handset/microphone. Inner compartment with emergency insulation pad. Short, padded lap belt. Run-up / closure in the main compartment keeps snow and dirt out. 4 MOLLE straps at the back of the package, where more bags can be attached. Velcro for identification patch. Band and elastic band for microphone for the section radio. Roll up the ends of all the straps to keep them tight.- Updated version 2020: Shoulder pads and lap belt are sewn on the backpack.
- Content: 50L.
- Dimensions: B = 34, H = 62, D = 22 cm.
- Weight: 1850 grams.
-
The small bag to store your short rifle or submachine gun. Padded and reinforced to protect the contents. The bag can be carried in the handles, over your shoulder and as a backpack. Two zippers opens the top completely. Inside compartments for magazines and maintenance equipment. Weight: 1,5 kg Dimensions: L= 60 cm, H= 30 cm, W= 7 cm Fitts inside: G36C, MP5, pistol, radio, magasin, batong och a weapon cleaning kit. -
Weight: 510 g Dimensions: H= 25, W=21, D=8 cm Volume: 3L Fits in: Medical supplies or technical equipment Fits on: The equipment vest, the specialist backpack or directly on the leg Features:The bag for the section. Adequate size for what you need but not too bulky on your leg.A well protected, versatile, light and flexible bag for first-aid, technical or other equipment that you want to keep in order. The bag is easy to fit on your belt or around your leg-
Just sufficient for the groups immediate needs
-
The bag is closed with a protected zip so the the contens won't fall out
-
While mounted on your leg the compartments in the bag are designed to work when standing or kneeling, to be as easy to work with as possible
-
There are compartments designed for first-aid kit or technical equipment
-
Outer compartment for scissors, surgical gloves and other equipment which first is used in an emergency. Sold without content
-
Other pouches can be attached on the outside of the bag
-
The bands can easily be mounted on your belt without opening your belt
-
The leg band is elastic and is closed with velcro to make sure the bag sits securly around your leg
-
Remove the leg band, the buckles and the attachment bands
-
Now you can weave it onto your vest
-
-
Features:The bag for shotgun ammunition-
Carried on your leg for easy access to a bag full of shotgun cartriges
-
Elastic mesh top for easy access and semi secure storage
-
Flap opens up out so it won´t block the access to the ammunition
-
Flap with velcro closure to really secure the contents of the bag
-
Velcro attachment system makes it possible to attach the holder on any equipment vest, leg atatchment or belt.
-
-
The perfect little bag to put your empty magazines in during a firefight. Also good for storing gloves, hearing protectors, etc. Use it to preserve evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things you don't want in your hands. Rolled up in the bottom of the vest. Pull the square ring down, naturally, when you want to open the pouch. Zipper closed top. The flap can be opened on the inside of the pouch. Accommodates 4 magazines. Attributes Weight: 160 g Dimensions:24 × 16 × 9 cm Color: Grey -
- The size is easily changed with the elastic cord. Low profile to make it easier to work in an open hatch or in a car. The elastic string closure in the top is fast and easy to open. It is threaded through an eye let further down than normal, this makes it easier to fold the elastic string to the side when you want to remove the magazine fast.
- The pull tab is designed to work with magazines with an angled bottom.
- The universal flap, 25-00007-00-000 can be attached on the magazine pouch. The flap has a silent hook opening that is easy and fast to use. Low cut to make it faster to remove the magazine. Inside Velcro patches were small holders for pistol magazines or grenades can be attached 25 mm MOLLE bands on the outside so you can attach other pouches on the outside. Two or more magazine pouches can be attached outside each other. Eyelet in the bottom to let water out. Tuck in attachment system makes it possible to attach the pouch on any equipment vest or belt.
- The attachment systems is easy to use both on standard 25 mm MOLLE systems as well as on the Swedish 20 mm system or on 50 or 60 mm belts.
- The dual holder insert -12, 25-00307-09-000 can be used to hold smaller magazines inside the short speed magazine pouch -12. The insert has 2 elastic holders with adjustable length bottom.
- Stores: 1 x G36 or other 1 x 5,56 or 1 x HK417 magazine or radio, pistol etc.
- Dimensions: W=8 x H=11 x D=3 cm.
-
Weight: 100 g Dimensions: L= 25, W= 7 & D= 7 cm Fits in: Large spary cans Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for your large spay canister that keeps it secure, which is easy to use and attach on the equipment belt-
The pouch is securely attached to the belt or vest
-
elcro closed flap.
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
Material: Polyurethane coated polyamide Weight: 50 g Dimensions: L= 13, W= 8 & D= 3 Fits in: Garmin GPS 60Map or Colorado Fits on: Equipment vest, belt or similar:A light weight and protective pouch that easily and quietly makes it possible to look at your GPS while walking-
In the folded position the padded front of the pouch protects the GPS from shocks
-
The open mode makes it possible to walk and look at you GPS without removing it from the pouch
-
An elastic band around the antenna keeps the pouch folded up during transport/protected mode. Pull the tab on the elastic band and the bag folds out to marching mode
-
On the back is our tuck in attachment system for quick and easy attachment on our equipment vest or similar
-
There are also Velcro straps for attaching the pouch on a carrier strap
-
Pouch weighs only 120 grams. It does not absorb water so it does not get any heavier in rain
-
-
A lightweight general purpose pouch with a wide opening top zipper. It opens on 3 sides for an easy access to the contents of the pouch. The zipper is semi stiffened to be easier to open and close. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can also be attached horizontally with the Velcro attachment bands. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits inside: Your night vision device, binocular, gloves or all the other small things you need to carry. Measurements: L= 19, W= 12 & D= 8. Weight: 105 g. Volume: 1,8L Note: The grey pouch does not have any MOLLE bands on the outside. -
Weight: 50 g Dimensions: L= 14, W= 11 & D= 4 Fits in: Handcuffs Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for two handcuffs, that keeps them silent and secure, which is easy to use and attach on the equipment belt-
The pouch is securely attached to the belt or vest
-
Fits normal and large handcuffs
-
Press button closure with Velcro patch
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch is fully padded to reduce the rattling of the handcuffs and to make the pouch as strong as possible
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
Weight: 200 g Dimensions: L= 17 & W= 17 Fits on it: All types of pouches Fits on: Trouser belts and equipment belts Features:A safe, easy, smooth and breathable attachment plate for the leg that is easy to use, mount and remove from the leg-
It fits securely on your belt. Double layers of modular webbing where pouches can be securely attached
-
The leg attachment plate is soft and can hardly be felt when worn
-
It weighs only 200 g
-
The leg straps are elastic to sit tight and comfortably
-
It is suitable for most pouches and holders in our system
-
It does not soak up water and will not be heavier when wet
-
-
A safe, easy, smooth and breathable leg mounting plate that is easy to use, attach and remove from the leg. It fits securely to your belt. A firm and ventilated place on your leg for one to four pouches. Mesh, perforated plastic sheet and foam keep the leg panel comfortable and ventilated. Elastic bands with Velcro closure keep the leg plate on your leg. The quick release with swivel function attaches the leg plate to your belt. The leg plate is soft and barely noticeable when wearing. The leg straps are elastic so that they are tight and comfortable. It is suitable for most pockets and holders in our system. It does not absorb water and does not gain weight when wet. One size fits all. Fits: Pistol holster and all types of pouches Beware: Belts and equipment belts -
Not in stock - on order
A safe, easy, smooth and breathable attachment plate for the leg that is easy to use, mount and remove from the leg It fits well on your belt. A firm and ventilated spot on your leg for one to four pouches. Mesh, perforated plastic film and foam keep the leg panel comfortable and ventilated. Elastic bands with Velcro closure attach the leg plate to your leg. Quick release buckle with swivel function attaches the leg plate to your belt. The leg attachment plate is soft and barely palpable while wearing. The leg straps are elastic to sit tight and comfortable. It is suitable for most pouches and holders in our system. It does not absorb water and does not gain heavier when wet. One size fits everyone. Fits: Pistol holster and all kinds of pouches Beware: Belts and equipment belts Weight: 300g -
Not in stock - on order
A pouch for large leg cuffs. Velcro tabs for fast closure of the flap. Press button for added security. Bottom drain hole. The pouch is padded to protect the cuffs. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. This system makes it possible to attach the pouch without removing other pouches from the belt. Weight: 70 g Dimensions: L= 16, W= 15 & D= 2,5 -
Not in stock - on order
The SnigleDesign is a must have cap for fans who like to cover their heads at the shooting range or want to protect themselves in the winter. Available in size Large and Medium. -
The long curved spoon connects the spoon garage on the belt to the backpack. This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. The garage is attached to the combat belt. The outer compartment connects to the backpack. The outer compartment of the double spoon garage 2.0 connects to the backpack with the curved long spoon, which is placed in the adjustable spoon cover. The curved spoon moves with your hips to allow the legs to move freely through the backpack, minimizing energy consumption in your body. -
The webbing sleeve that attaches in the Squeeze vest/plate carrier to connect the long spoon to the spoon garage on the combat belt. Weight:30 g Dimensions: 22 x 5 x 1 cm *Additional equipment for illustrative purposes only. Not included. -
Kenmerken: The I-Bar is mounted where you want to attach your backpack, bag or Specialist backpack small. It can be mounted on any backpack, vest or sternum.How to assemble:
- Thread the strap under the strap on the platform where you want it to be.
- The strap should be laced in the direction the buckle should be pointing when attached.
- Pull the strap through the front hole of the buckle
- Pull the strap through the rear hole of the buckle
- Adjust the length of the belt
- Fasten the Velcro
- Pull the buckle to make sure it's secure
- Attach the other buckles you need
- Attach the bag/backpack etc and make sure the buckles are placed in the correct positions
