- A small wallet for coins and notes with an identity card holder.
- Closure with Velcro.
- Inner compartments for credit cards and driver's license.
- Outdoor compartment with zipper for coin.
- Holder for a neck cord.
- Dimensions: 10 x 9 x 1 cm
- Weight: 40gram
- Part number: 52-00090-01-000
-
-
A very comfortable, flexible, fast, accessible and safe way to carry a weapon. With a vest strap attached to the vest, the weapon can be attached to the vest. This removes the uncomfortable strain of the neck that is common with regular arms trops. The strap is adjustable at both ends. The system contains two vest straps, which can be attached to each shoulder. The weapon can then be worn hanging in the middle or on one shoulder, right or left. The weapon system offers several ways to carry a weapon. 1. As a standard rifle belt, with the shoulder cushion and the two fastening straps, mounted in the front and rear of the weapon. 2. With a vest strap on the right or left shoulder on the vest. A fastening strap mounted at the back of the weapon and then attached to the vest strap. 3. With vest strap on the right and left shoulder of the vest. Both fastening straps are mounted on the back of the weapon and then fastened in the vest straps. Now the weapon is centered on the chest. 4. Fastening straps mounted in the shoulder cushion and then both fastened in the rear part of the weapon; Now the gun is in a loop around the neck. The weapon can be folded up and the elastic wire can be pulled around the barrel or any other part of the weapon to secure it while skiing or shooting with a section weapon. Be careful when the barrel is hot, it can melt the elastic wire. The system can be fixed in two different ways: A. Silent, in the weapon with the sewn loops. B. Flexible with carbine hooks. -
A gray and black patch with the text K9. 35x 25 mm. Hook Velcro at the back so that the patch can be attached to bags on Velcro surfaces. -
A gray and black patch with the text SNIPER. -
Not in stock - on order
Weight: 60 g Dimensions: L= 9, W= 8 & D= 3 cm Fits in: 1x Accuracy International L96A1 AW magazine Fits on: Equipment vest, leg platform and the specialist backpack Features:Safe storage, fast access and light weight-
Stores 1 x 9 round, 7,62magazine for the Accuracy International L96A1 AW rifle
-
Low cut front for fast access
-
Flap for dirt protection
-
2 press buttons to close the flap
-
Tuck in attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
A small zippered pocket on the front for papers, pens etc.- MOLLE tires at the front.
- Velcro-covered exterior where you can attach a patch.
- Window on the inside for cards or notes.
- Inside elastic compartments for pens or papers.
- Tuck in fastening system makes it possible to attach the bag to any equipment vest or belt.
- The new version, 21-00309B is 4 cm wider and has a compass compartment on the back.
- Weight:110 g
- Dimensions:16 × 14 × 1 cm
-
Not in stock - on order
A tighter General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. Velcro openable bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy fold back system on the back of the pouch. This makes it possible to attach the pouch without removing other pouches from the belt. Weight: 40 g Dimensions: H = 13 cm, W = 4 cm, D = 3 cm Fits: Pistol magazine, short flash lights, multi tools etc. Fits on: Equipment vest, belt, leg plate or leg attachment -
Weight: 50 g Dimensions: L= 13, W= 7 & D= 2 Fits in: Keys Fits on: The equipment belt Features:Protects a bunch of keys and keeps them from rattling-
Press button closure for the key ring (included)
-
Padded cover with Velcro closure
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
-
A band with a good and secure hook to keep your keys at hand any where on your belt or equipment vest * One hand open hook, to make it easy to get the keys * Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt- Measurements: L== 12, W= 2,5 & D= 2
- Weight: 30 g
-
A harness to support the combat belt. Distributes some weight from your hips to the upper body. One size fits all, adjustable in length in the front and in the back. Elastic string in the back for increased comfort and mobility. Attaches in the front and back at four points on the top of the belt with a buckle. Weight: 50 g -
A tight fitting FR neck gaiter that can be used to protect your neck, as adust cover for your mouth or as a beanie. Light weight and thin to be comfortable in most situations. Material: 63% Lenzing FR/ 29% Conex/ 5% Twaron/ 2% Elastane/ 1% Belltron Hat and equipment not included, for illustrative purposes only. -
A practical model that has been used and refined for a long time, the product of years of development. A practical outer pocket with Velcro closure, to have ID:s or similar cards at hand. Two loops for a string (not included) in the top edge of the wallet, making it possible to carry the wallet around the neck with an ID card visible. On the inside a Velcro closed compartment for coins, two windows for ID cards and 4 pockets for credit or parking cards etc. There is also a box for membership cards etc. On the inside there is a full-width compartment for banknotes with a partition for storing foreign notes separately. Smaller pockets are sewn on the back of the inside to store business cards etc. Fits: Money, credit card, ID card etc. Beware: In your hand, around your neck or in your pocket -
keeps your personal belongings dry in the backpack.- 100% waterproof.
- Roll up the ends with a buckle on the side.
- Velcro patch that can be removed to mark the contents of the bag.
- Three bags in the set, small, medium and large for different items.
- Store and protect all your belongings in the backpack.
- Better than one big waterproof bag for backpacks with zipper openings and outer pockets.
- The largest bag contains your sleeping bag or spare clothing and is 70 cm high and 36 cm wide.
- The middle bag is 52 cm long and 26 cm wide.
- The smallest bag is 42 cm high and flat 20 cm wide.
- Article number: 26-01082A09-000
- Weight: 200g
- Dimensions: 30 x 5 x 5 cm
- Colour: Grey
-
For the group medic or the technician etc. who wants to carry the required equipment on the equipment vest, around the waist, on the back, over the shoulder or attached to the back pack Large compartment with Velcro flap inside the bag Four small and zipped compartments in clear plastic inside the main compartment. Four elasticized compartments with Velcro closure on top of the main compartment One large and two small inside pouches in different colors are attached with Velcro to the bottom of the bag. Zipped closure with emergency closure buckle on the top. Two padded shoulder straps with chest strap to be used when carrying the bag as a backpack. Two long straps to attach it to the back of the equipment vest or to connect and use as a shoulder strap. Roll up ends with Velcro to keep the bands neat. Two short straps to secure it to the equipment vest or to secure it around the leg. Handle in the top to carry the bag in your hand. Outside Velcro stripes so you can attach your markings. Fits: Medical supplies or technical equipment Fits on: The equipment vest back, over your shoulder or around your waist Dimensions: H=33, W=30 & D=10 cm. Volume: 10L Weight: 1200 g -
Not in stock - on order
Weight: 40 g Dimensions: L= 11, W= 9 & D= 2 Fits in: Handcuffs - only classic model with chain ! Fits on: Equipment vest, belt, leg plate or leg attachment Features:A light weight pouch for handcuffs which is are flexible and can be used on the duty belt or covertly. The pouch is designed to be small, lightweight, flexible and to comfortably hold your handcuffs-
Open top for lowest weight
-
The pouch can easily be opened with one hand
-
It sits comfortably mounted on the belt and can be closed with the press button
-
The weight is only 15 grams. The material does not retain water so is no heavier if wet
-
Can be attached without removing items from the duty belt
-
Use the velcro strap on the back to attach the holder to the duty belt. You can open and attach it to the outer belt without removing other pouches
- Open the straps and thread them around the belt and close it with the velcro straps.
-
-
Weight: 50 g Dimensions: L= 14, W= 11 & D= 2,5 Fits in: Handcuffs Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for your handcuffs, that keeps them silent and secure, which is easy to use and attach on the equipment belt-
The pouch is securely attached to the belt or vest
-
Fits normal and large handcuffs
-
Press button closure with Velcro patch
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch is fully padded to reduce the rattling of the handcuffs and to make the pouch as strong as possible
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
A light weight, easy to adjust and tight fitting equipment vest with many features. A 15-20 cm wide elastic size adjustment in the back. MOLLE webbing on the front, sides and back for pouches. 2 large front pockets with zipper closure. Padded adjustable shoulders. Cable routing from the back to the front. Elastic loops on the shoulders for hydration tube or radio wires. Hydration system compartment in the back pocket. Velcro patches on the front and back for name and unit patches. Four sizes: 1= 85-100 cm waist 2= 95-110 cm waist 3= 100-120 cm waist 4= 110-130 cm waist Weight Size 1: 470 g, Size 2: 500 g, Size 3: 530 g, Size 4: 640 g -
An ergonomically designed belt to improve your comfort when you carry a heavy load Weight: 450 g Fits: All pouches and holders Fits on: Everybody Features:-
Inner and outer belt construction
-
Ergonomically shaped to fit around the body and hips
-
Non slip inside to minimize the pressure required to keep the belt up
-
Padded inside belt for comfort
-
Three point security buckle, prevents unwanted opening
-
Outer safety strap for added security and to hold gloves
-
Channel for cable ties
-
Velcro to attch on your current pouches and holsters is supplied with the belt
-
XSmall: 65-93 cm
-
Small: 75-103 cm
-
Medium: 85-113 cm
-
Large: 95-123 cm
-
XLarge: 105-133 cm
-
XXLarge: 120-148 cm
-
-
An evolution of the classic balaclava, with a strong mesh over mouth and nostrils, allowing you to breathe freely - even during strenuous tasks - while still providing protection. Lightweight and thin enough to wear under a helmet, as protection from wind and cold, but airy enough to wear in warm weather. The Annaclava is cut long to cover the entire neck well. Flatlock seams for more durability and comfort. Use it as a hat by putting the excess material in the hat. Material: 59% Modacrylic/29% FR Polyester/9% Cotton/3% Elastane -
Not in stock - on order
A padded pouch with drawstring closure. Thick fleece on the inside for protection. Can be used to store sensitive equipment such as night vision goggles. Fits in our Small Oyster pouch.- Weight: 38 g
- Dimensions: 23 x 17 x 2 cm
-
Not in stock - on order
A very light and tight harness for minimal wearing of secret equipment For 1 radio, 1 CS spray can and a telescopic batong The harness is small and thin and is worn in such a way that it is not visible when using an open jacket or shirt The harness is comfortable despite the narrow shoulder straps. The back strap and straps relieve your neck. You can put all your gear in the harness instead of in your trouser and jacket pockets. All your equipment is stored in one place and is easily accessible. The harness is easy to put on and take off The back strap prevents the harness from sliding forward A microphone can be attached to the shoulder strap Fits in: Radio, OCspray and telescopic baton Beware: One size fits all -
A grey and black patch with the dog's head and the text K9. 70 mm. Velcro on the back so that the patch can be attached to Velcro surfaces of bags and pouches. -
Has a removable elastic cord and a pull tab to facilitate the use of the pouch- A tight general pocket to store small objects.
- The pouch is designed to be as lightweight and space-free as possible, while remaining strong enough for military use.
- Velcro closed flap with pull tab on the flap for easy opening even with gloves on.
- The flap can be pushed into the pocket for easier access to the thing you're carrying in the pouch.
- Elastic cord, on the pouch to secure the contents, even when the valve is open. The cord can be removed.
- Bottom drain hole.
- Fold back fastening system makes it possible to attach the bag to any equipment, vest or belt.
- It has Velcro straps on the back so that it can be worn horizontally on the belt.
- It fits: Pistol magazine, multitool, flash light or other similar objects.
-
The adjuster makes it easy to adjust the size of the equipment strap when changing from heavy winter clothing to light summer clothing Attach it to the right side of the belt and then thread it through the buckle The buckle is still on the left side and you use the belt as you are used to The safety belt is used as usual on top of the adjuster Dimensions: 22 x 5 Beware: 50 mm equipment straps -
The Snigel light combat belt is a lightweight, comfortable and slim strap for your first gear. Features- Padded belt with 2 MOLLE webbing sewn on the outside for a comfortable wearing of any type of pocket or holster.
- The MOLLE webbings are sewn on 8 cm wide MOLLE panels, with slots between the panels so that: the inner tube can be woven on the inside; or outdoors, depending on whether you want MOLLE mounting or belt mounting for holsters and other accessories.
- Remove the inner tube and use the riggers strap to combine the functions of both straps.
- On the inside of the belt, Velcro loop stripes are sewn to match/connect with a belt with Velcro on the outside.
- Four loops are sewn into the top of the belt so you can attach a harness or suspenders if necessary.
- The foam/1mm HDPE padding can be removed if you want an even slimmer strap.
- 100% polyamide PU-coated fabric.
- 100% polyester webbing
- 100% polyethylene foam and plastic plate.
- 13-01897A09-001 - 0H-J (XS/S): 82-120 cm
- 13-01897A09-002 - K-M (M/L): 94-132 cm
- 13-01897A09-003 -N-P (XL / XXL): 106-148 cm
-
A 50 mm wide belt that can be used in many ways. To wear any pouch around your shoulders or waist. Like a hip belt on backpacks. As a light combat belt. A 40 mm garter oiler. 50 mm band and 25 mm tyres with 40 mm wide MOLLE openings, vertically on one side of the 50 mm band and horizontal on the other. A double adjustable buckle on the side closes the sling. -
Weight: 1900 grams Dimensions: B = 39 cm, H = 58 cm, D = 23 cm. Capacity = 40 litres Suitable for: Man pack radios, HARRIS Falcon, field computer, administration equipment, medical equipment, insert optics or personal equipment for 24-48 hours Beware: Can be carried in the hand, over the shoulder or on the back. Suitable for tactical and ballistic vests. Features: A solid, reliable and versatile backpack for storing and transporting sensitive/vulnerable equipment. The backpack can be custom-made by the user for radio, first aid, photo kit/ surveillance or technical equipment. The bag has a ventilated back with a plastic plate and an aluminum support at the back to make it sturdy but customizable. Shoulder pads are made of plastic foam for comfort and an even balance of weight. They have a chest strap and attachment for handset/microphone. The shoulder pads can be stowed behind the back plate and you can then use the backpack as a shoulder bag and a compression strap on the side can then be used as a shoulder strap. The bag is made of hard-wearing coated polyamide fabric and has a sturdy zipper. Long solid zipper with long drawstrings. The zippers are long so that the backpack can be fully opened. On the backpack are 4 compression straps sewn on the side. The loose ends of the compression straps on the side roll up and are fastened with Velcro. The bag has two carrier handles, one on the side and one on the top. Main compartment has 2 inner pockets with zippers that are good for first aid equipment, fieldwork equipment or other technical equipment. The outer pockets have a zipper and they each have an elastic mesh pocket with zipper on the inside for the different things you might need to store. The bottom box is suitable for 15" field laptop/computer or supplementation/replacement clothing. Modular tires to pouches/bags for first aid equipment, holders for radios etc. To be attached are placed on the outside of the outer pockets. An optional medical wall can be attached with straps in the middle of the backpack. The wall remains vertical when the backpack is open. A manpack radio can be fastened with two bands close to your back for the best weight distribution and balance. At the top of the backpack are two holes for cables or a tube for the drinking system. Access openings for radio or computer cables are placed on each side at the bottom of the backpack. The cable for the wireless microphone is guided through the access hole in the lower part of the backpack and then the microphone is attached to the shoulder piece. The identification of the owner can be written on the Velcro. The backpack is suitable for carry-on dimensions. -
This insert fits in the Snigel Trauma Pouch -17 and facilitates keeping all contents in order. Three 5 cm wide elastic attachments, a net pocket and two plastic covers for e.g. trauma cards (TCCC) or instructions. By pulling the Velcro, the insert is detached in one operation and ready for use. Please note that medical equipment is sold separately. -
A small, lightweight, safe and flexible pouch for your first aid kit- The bag is closed with Velcro. Pull the strap to open the pouch (can be used with gloves).
- You can attach the pouch to all our carriers. It can be attached with the flap up or down.
- The bag does not absorb water and does not gain weight in rain
- The eye in the bottom of the bag may oms water
- The fastening system with snaps makes it possible to attach the pocket to any equipment vest or belt
-
Weight: 10 g Dimensions: L= 7 & W= 2,5 Fits in: Gloves Fits on: The equipment belt Features:An elastic glove keeper to carry gloves on the belt-
Fits most gloves
-
Threads onto the equipment belt
-
Velcro closure
-
Light weight
-
-
This telescopic baton holder can be attached vertically or horizontally to our equipment belt or equipment vest. It can also be worn hidden on your belt. Fits most telescopic batons. Large opening in the top for easy insertion of the baton after use. Elastic loop to secure the baton. The bottom has an opening to insert an extended baton. The opening can be closed with a flap with push button. Fold-back fastening system makes it possible to attach the pouch to any equipment vest or belt. Dimensions: L= 20, B= 5 & D= 6 Fits in: Telescopic baton Beware: Equipment vest, belt, leg plate or leg attachment -
A padded belt with 2 MOLLE bands sewn on the outside for a comfortable carrying of any type of pouch or holster. The MOLLE bands are sewn on 8 cm wide panels with slots between the panels. The inner belt can be placed on the outside of one or more panels so a pistol holster can be worn. An inside 25 mm band is sewn under the panels, use it to attach a leg panel if you need to. It prevents the band from the leg panel from blocking other pouches on the belt itself. On the inside of the belts foam ridges are sewn to improve ventilation and comfort. They also make the belt fit snugly on the body. In the top of the belt, loops are sewn so you can attach a harness or similar. Ballistic panels can be inserted inside the belt. Remove the waist band and use the riggers belt to combine the features of both belts. A 3 point security buckle, prevents unwanted opening. The belt adjuster can be used on this belt.- Weight: 500 g
- Small: 76-105cm
- Medium: 85-115 cm
- Large: 95 -125 cm
- XLarge: 105-135 cm