-
A gray and black patch with the text INSTRUCTOR. 100 x 25 mm. Velcro at the back so that the patch can be attached to Velcro surfaces on bags and pouches. -
12 mm flexible, ergonomic polyethylene knee pads. The pair of knee pads sits in the pockets on the inside of the pants, with the ribbed side facing inwards, to protect the knees. The text "This side towards the enemy" is placed on the outside of the pants. Holes have been punched into the knee pads to increase ventilation, making them cooler in hot weather. The lower part of the pads can be cut off to adjust the height so that it ends up on the knee when you kneel. The knee pad can be used in the Snigel combat pants Article number: 00-201669A01-000 Weight: 40 grams Dimensions: 25 x 18 x 2 cm -
A lightweight bag for your large handcuffs, which keeps them quiet and secure, easy to use and attaches to the equipment belt. The pouch is securely attached to the belt or vest Suitable for normal and large handcuffs Snap fastener with Velcro The Velcro closure makes it possible to close the pouch quickly and easily. The pouch is fully padded to reduce the rattling of the handcuffs and make the pouch as strong as possible The pouch does not absorb water, does not rot and does not soften in the rain The foldable fastening system makes it possible to attach the pouch to any vest or belt. The pouch can be attached to the belt without removing what is already on the belt. Open the fastening straps on the back of the case. Place the pouch on the outer belt. Thread the fastening strap under the horizontal strap on the pouch and close the fastening straps. Fits in: Handcuffs Beware: Service belt, Leg Platform, Equipment Vest and on the belt Weight: 60 g Dimensions: 11 x 11 x 4 cm -
A safe, easy, smooth and breathable leg mounting plate that is easy to use, attach and remove from the leg. It fits securely to your belt. A firm and ventilated place on your leg for one to four pouches. Mesh, perforated plastic sheet and foam keep the leg panel comfortable and ventilated. Elastic bands with Velcro closure keep the leg plate on your leg. The quick release with swivel function attaches the leg plate to your belt. The leg plate is soft and barely noticeable when wearing. The leg straps are elastic so that they are tight and comfortable. It is suitable for most pockets and holders in our system. It does not absorb water and does not gain weight when wet. One size fits all. Fits: Pistol holster and all types of pouches Beware: Belts and equipment belts -
A grey and black patch with the text PRESS. 260 x 50 mm. Velcro on the back so that the patch can be attached to loop-shaped Velcro surfaces on bags and pouches. -
Not in stock - on order
A pouch for large leg cuffs. Velcro tabs for fast closure of the flap. Press button for added security. Bottom drain hole. The pouch is padded to protect the cuffs. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. This system makes it possible to attach the pouch without removing other pouches from the belt. Weight: 70 g Dimensions: L= 16, W= 15 & D= 2,5 -
The Snigel light combat belt is a lightweight, comfortable and slim strap for your first gear. Features- Padded belt with 2 MOLLE webbing sewn on the outside for a comfortable wearing of any type of pocket or holster.
- The MOLLE webbings are sewn on 8 cm wide MOLLE panels, with slots between the panels so that: the inner tube can be woven on the inside; or outdoors, depending on whether you want MOLLE mounting or belt mounting for holsters and other accessories.
- Remove the inner tube and use the riggers strap to combine the functions of both straps.
- On the inside of the belt, Velcro loop stripes are sewn to match/connect with a belt with Velcro on the outside.
- Four loops are sewn into the top of the belt so you can attach a harness or suspenders if necessary.
- The foam/1mm HDPE padding can be removed if you want an even slimmer strap.
- 100% polyamide PU-coated fabric.
- 100% polyester webbing
- 100% polyethylene foam and plastic plate.
- 13-01897A09-001 - 0H-J (XS/S): 82-120 cm
- 13-01897A09-002 - K-M (M/L): 94-132 cm
- 13-01897A09-003 -N-P (XL / XXL): 106-148 cm
-
Not in stock - on order
The blanket has a fleece construction with a high loft in combination with a waterproof and breathable outer fabric. The blanket has two functions: a traditional blanket and an insulated poncho worn over the shoulders. The blanket fits in its own compact bag measuring 19x13x24 cm. Laid flat, the blanket is 145 cm long, 80 cm wide at the foot and 110 cm at the top. The blanket is ideal for 24-48 hour missions and effectively repels the cold during rest or guard duty. The blanket can be easily attached around your shoulders with five press studs.- The blanket is made of fleece with a waterproof/breathable outer fabric.
- It can be used as a blanket or as a poncho over the shoulders.
- Perfect for a 24-48 hour mission.
- Keeps the cold away when you're asleep or on watch.
- With a push button, you can attach it over your shoulders.
- Packed in its own small bag, 17x12x23 cm.
-
Not in stock - on order
A minimalist solution with a lot of functionality per gram! An innovation by Anton Matsson. The harness is easily attached to the object you want to wear and is usually used in two different types of configurations. To adjust the length of the strap, the line is simply tied off. In the backpack configuration, an object is attached at two points, this could be a second weapon system or a chainsaw for example. In this configuration, a jacket or sweater may have been changed to a temporary backpack. In the suspender configuration, the lines are interwoven and placed on your back. In this configuration, an object is attached by a point in the top, this can be a pair of gas canisters or water jugs, ammunition holders or a stretcher. For most applications, the lines are usually directly connected to the object. To the pendulum points of the weapons system, for example. Fix it, wear it or drag it! -
The long spoon that connects the spoon garage on the belt to the spoon sleeve in the pinch vest/plate carrier. *Accessories and images for illustration purposes only. Not included. -
Our latest low profile design, designed for integration of ballistic vest, includes 2 liters in a ballistic vest and 3 liters in a package. Maximum use of low-profile technology reduces the depth of the wearer, making it a truly unobtrusive drinking system. Features- Hi-Flow Storm-Valve: No-bite push-pull valve with integrated shut-off mechanism; easy disassembly for cleaning
- Low Profile: maximum use of low-profile technology reduces the depth of the wearer
- The horizontal blow connector allows the drinks hose to be routed out of the ballistic plate bag without kinking the hose
- Angled valve: rotates 360 degrees for perfect valve/mouth orientation; let the tube become 25 cm shorter; less excess tube bouncing around the chest
- Dirt shield valve cover to protect the nozzle from dirt
- Cool Weave Cover Tube: isolates and blocks UV light; water stays cool and inhibits the growth of bacteria
- Taste-free system: co-extruded PE film retains the pure liquid taste without plastic taste; BPA and phthalate free
- Glassy film with Grunge-Guard technology: Inhibits the growth of bacteria on the surfaces of reservoirs and drinking tubes
- Care-Free: cleaning by simply rinsing the system and hanging it dry (if used with water)
- Widepac closure: patented sliding closure for easy tapping and cleaning; airtight seal
- QMT hose/reservoir connector with seal ensures quick and leak-proof removal of the bladder to refill it
-
A case to store your documentation equipment, maps, pens, etc. in a place where you can reach and see them when you move. Attach it to the front of the vest or chest. Attach your normal pouches to the outside of this case. Compartment for cards, pens and paper. Includes ring binder mechanism with Velcro that can be easily removed. Cords to secure the pins. Half-covered holder for a cyalume, so you can see what you're looking at in the dark with minimal exposure. Water repellent and strong to protect the content. Fold-back mounting system makes it possible to attach the pouch to any equipment or ballistic vest with MOLLE straps. Cable openings in the bottom. Fits: A5 paper and block, pens, rubber, small ruler, small tablet computer (e.g. iPad™ or Panasonic Toughpad FZ-M1™), cards, light sticks and memo cards. Beware: On the equipment vest Weight: 370 g Dimensions: 21 × 27 × 4 cm *Contents in the pouches are purely illustrative. No content included. -
We have removed the MOLLE from the front of the bag in this new version. A handy shoulder bag for all those things that end up in your arms when you least wish for it. Easy to carry and keeps everything you wear at your fingertips. A grab bag with six inner compartments for warehouses, radios and all kinds of tactical or outdoor equipment during your hikes. Two compartments are equipped with a zipper to further secure the contents. Opening with zipper to the main compartment and a drawstring closure inside. Removable shoulder strap with buckle. Removable waistband with buckle. Eyelet in the soil to let water through. Also very useful for walks with your dog to bring the necessary things.- Weight: 450 g
- Dimensions:30 × 30 × 17 cm
- Volume: 10L
-
MG AMMUNITION BAG -09 Fits in it: 200 x 5.56 mm or 200 x 7.62 mm or 200 cassette Beware: In your hand, over your shoulder or on the equipment vest functions:- The perfect case to carry ammunition for the SAW/Minimi machine gun
- For 200 rounds coupled 5.56 ammunition free of charge or in a cassette
- Also suitable for 7.62 coupled ammunition
- Can be used for 2 Cal 50 warehouses
- Webbing on both sides for attaching small bags
- The pouch can be attached to the vest or worn in a shoulder strap (not included)
- Article number: 22-00511-09-000
- EAN: 7332673301539
- Weight: 300 grams
- Dimensions: 18 x 19 x 8 cm
- Category: Holders & bags
- Color: Grey
-
The perfect little bag to put your empty magazines in during a firefight. Also good for storing gloves, hearing protectors, etc. Use it to preserve evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things you don't want in your hands. Rolled up in the bottom of the equipment vest, under another pouch it does not take up any space.... Pull the square ring down, naturally, when you want to open the case. Suitable for 4 warehouses. Attributes Weight:100 g Dimensions:4 x 12 x 35 cm Color: Black or Grey -
- A small wallet for coins and notes with an identity card holder.
- Closure with Velcro.
- Inner compartments for credit cards and driver's license.
- Outdoor compartment with zipper for coin.
- Holder for a neck cord.
- Dimensions: 10 x 9 x 1 cm
- Weight: 40gram
- Part number: 52-00090-01-000
-
A grey and black patch with the text MOE for Method Of Entry. 50 x 25 mm. Velcro on the back, so that the patch can be attached to Velcro surfaces of bags and bags. -
Not in stock - on order
An overjack designed for the operator with an emphasis on camouflage and camouflage. The use of this jacket will significantly reduce your visual and thermal signature Very good visual camouflage Limited thermal radiation camouflage (NIR) Front closed with push buttons Flame retardant A ghillie jacket designed for the operator to be used outside the normal jacket or in hot weather outside a shirt can be worn outside the vest of the equipment Material Flame retardant polyester mesh Beware: Outside the equipment vest -
The next generation of user-friendly Snigel zippered pouches. CHARACTERISTICS:- A lightweight general purpose pouch with a wide opening top zipper.
- It opens on 3 sides for easy access to the contents of the pouch.
- The zipper is half stiffened and placed at an angle to make it easier to open and close.
- Soil drain.
- Foldable fastening system makes it possible to attach the bag to any equipment vest or belt. MOLLE / PALS band on the outside.
- Three rows of tires are covered with Velcro so that patches can be attached.
- Small: 100 g
- Medium: 130 g
- Large: 160 g
- Small: L = 19, B = 8 & D = 6 cm.
- Medium: L = 19, B = 12 & D = 8 cm.
- Large: L = 19, B = 16 & D = 9 cm.
- 100% polyamide PU-coated fabric.
- 100% polyester band
-
Not in stock - on order
A padded pouch with drawstring closure. Thick fleece on the inside for protection. Can be used to store sensitive equipment such as night vision goggles. Fits in our Small Oyster pouch.- Weight: 38 g
- Dimensions: 23 x 17 x 2 cm
-
This is a perfectly hidden holster, adjustable for both gun and gun with a lamp. It's worn in your belt. It can also be used if you normally carry a gun in the equipment vest or on the belt. There are often situations where you have to take them off, where do you put your gun? Our solution is this holster that is small and quite soft. When you need to reduce your profile, or e.g. walk around the camp, but don't wear the standard holster, this holster is a natural way to carry a gun. The holster is semi-soft and can be worn without a gun, without discomfort under the equipment vest or belt. Works for both right- and left-handed shooters. The height of the gun is adjusted with a belt to adjust the length, allowing you to get it exactly the way you want it. Seat belt for thumb unlocking. Sig226, Glock 18/17 or similar pistols with or without flashlight fit in. -
The new Snigel logo. Velcro on the back. Is attached to the outside of a bag, cover or similar with Velcro patches. -
A grey and black Snigel patch with the text POLICE. 250 x 50 mm. Velcro on the back, so that the patch can be attached to Velcro surfaces of bags and bags. -
A grey and black Snigel patch with the text POLICE. 90 X 25 mm. Velcro on the back, so that the patch can be attached to Velcro surfaces of bags and bags. *Image with stylo illustrating size. -
Quickly connect/ disconnect the bladder tube Convenience with push button Integrated locking mechanism Fully compatible with Tactical Gear QMT -
Material: Polyamide and steel Applications: People in handcuffs who are not allowed to run away Beware: Most pouches, but the best in the carrier bag Features:- A sling to prevent apprehended people from running away
- Strong tires and buckle
- The buckle opens the "wrong" way to make it harder for the prisoner to open it
- Used in combination with handcuffs
- Easy and quick to attract
-
Fits: Most weapons in 9 mm, 7.62 or 5.56 mm Beware: On the body or on the equipment vest Features:- A very comfortable, flexible, quickly accessible and safe carrying system for your weapon
- With vest fastening to the weapon can be worn to the vest. You avoid the uncomfortable strain on your neck that you get from a regular gun belt
- The long pendulum like an ordinary weaponling
- The long pendulum is attached to the vest
- The weapon is firmly stuck in the pendulum
- The standard hooks on your weapon are used
-
Not in stock - on order
This is a shorter replacement version, 75 cm long, of the regular backpack strap. (The regular belt is 83 cm long). The belt can also be used for our specialist backpacks. Attributes- Article number: 26-00910-09-001
- Weight: 500 g
- Dimensions: 100 x 14 x 2 cm
-
Not in stock - on order
KEY FEATURES- Two full-length zipped side pockets in each side
- Attaches to the 50L Mission backpack 2.0 with zippers
- Can be worn together as a backpack or individually over the back.
- Can be worn individually around the waist.
- 6 webbing loops on the outside.
- 100% Nylon -PU coated
- All fabrics, buckles and belts are IRR compliant.
- The substance is FR.
- 2x11L
- H= 48, W= 21 & D=13 cm
-
Not in stock - on order
A very light and tight harness for minimal wearing of secret equipment For 1 radio, 1 CS spray can and a telescopic batong The harness is small and thin and is worn in such a way that it is not visible when using an open jacket or shirt The harness is comfortable despite the narrow shoulder straps. The back strap and straps relieve your neck. You can put all your gear in the harness instead of in your trouser and jacket pockets. All your equipment is stored in one place and is easily accessible. The harness is easy to put on and take off The back strap prevents the harness from sliding forward A microphone can be attached to the shoulder strap Fits in: Radio, OCspray and telescopic baton Beware: One size fits all -
The perfect little bag to dump your empty magazines into during a firefight. Also useful for storing gloves, hearing protection, etc. Use it to store evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things that you don't want in your hands. You wear it rolled up in the bottom of the equipment vest. Pull the square D-ring if you want to open the pouch. Zipper at the top. Accommodates 4 warehouses. Attributes- Article number: 22-00301-56-000
- Weight:160 g
- Dimensions: 24 × 16 × 9 cm
-
The perfect little bag to put your empty magazines in during a firefight. Also good for storing gloves, hearing protectors, etc. Use it to preserve evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things you don't want in your hands. Rolled up in the bottom of the vest. Pull the square ring down, naturally, when you want to open the pouch. Zipper closed top. The flap can be opened on the inside of the pouch. Accommodates 4 magazines. Attributes Weight: 160 g Dimensions:24 × 16 × 9 cm Color: Grey
