-
The long curved spoon connects the spoon garage on the belt to the backpack. This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. The garage is attached to the combat belt. The outer compartment connects to the backpack. The outer compartment of the double spoon garage 2.0 connects to the backpack with the curved long spoon, which is placed in the adjustable spoon cover. The curved spoon moves with your hips to allow the legs to move freely through the backpack, minimizing energy consumption in your body. -
The webbing sleeve that attaches in the Squeeze vest/plate carrier to connect the long spoon to the spoon garage on the combat belt. Weight:30 g Dimensions: 22 x 5 x 1 cm *Additional equipment for illustrative purposes only. Not included. -
Kenmerken: The I-Bar is mounted where you want to attach your backpack, bag or Specialist backpack small. It can be mounted on any backpack, vest or sternum.How to assemble:
- Thread the strap under the strap on the platform where you want it to be.
- The strap should be laced in the direction the buckle should be pointing when attached.
- Pull the strap through the front hole of the buckle
- Pull the strap through the rear hole of the buckle
- Adjust the length of the belt
- Fasten the Velcro
- Pull the buckle to make sure it's secure
- Attach the other buckles you need
- Attach the bag/backpack etc and make sure the buckles are placed in the correct positions
-
The long spoon that connects the spoon garage on the belt to the spoon sleeve in the pinch vest/plate carrier. *Accessories and images for illustration purposes only. Not included. -
This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. It also has a quick-release buckle so you can quickly shed your backpack if you need to. The garage attaches to the combat belt to connect to the Squeeze plate carrier or vest in the inner pocket. The outer compartment connects to the backpack. The connecting piece is the long spoon or/and the curved long spoon. The long and long curved spoons are not included in the double spoon garage 2.0. *Atmospheric images and additional material for illustrative purposes only. -
The tie-down strap that attaches to our 90-130 liter backpacks and connects the long spoon to the double spoon garage on the combat belt. This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. The outer compartment of the double spoon garage 2.0 connects to the backpack with the curved long spoon, which is placed in the adjustable spoon sleeve. *Atmospheric photos and additional material for illustrative purposes only. Not included in the package. -
Two different mechanisms for attaching paper to our sleeves. Both have Velcro at the back. FBM-10B= Is an international 2-hole mechanism. 85 mm between the rings and the rings have a diameter of 40 mm. 50-00019-01-000= Is a Swedish standard mechanism with 4 holes. Color: Olive -
Attach the pouches to the Velcro panel or in the organized bag 4 color-coded zippered pouches to keep medical or technical equipment organized. Small bags: 18x16x7 cm and large bags: 32x15x7 cm 7 cm high sides Velcro on the back to attach the pockets to the Velcro panel in the Specialist backpack small Color-coded to make it easier to find what you're looking for Fits: Anything – medical equipment, technical equipment, or personal items Beware: In the backpack, specialist, small *Content for illustrative purposes only. -
The perfect pouch to quickly put your empty magazines in during a firefight. Also useful for storing gloves, hearing protection, etc. Use it to put evidence or other important things in during a raid Basically, the pouch is designed to temporarily carry things you don't want in your hands Is worn rolled up in the bottom of the vest Pull the large D-ring when needed The drawstring with drawstring closure at the top can be tightened to tighten the opening of the pouch Capacity: 10L Suitable for: 8-10 x 5.56 magazines, earmuffs, gloves etc. Beware: Equipment vest, belt etc. -
The size is easily changed with the elastic cord. Low profile to make it easier to work in an open hatch or in a car. The elastic cord with heat shrink closure at the top is quick and easy to open Low cut for faster removal of the magazine. 25 mm MOLLE straps on the outside so you can attach other magazine bags to the outside. Two or more warehouse bags can be attached outside each other. Eyelet in the soil to let water through. The Tuck in attachment system makes it possible to attach the pouch to any vest or belt. The mounting system is easy to use on standard 25 mm MOLLE/PALS system. Storage compartments: 1 x 7.62 or 1 x 5.56 magazine or radio, pistol etc. Weight:95 g Dimensions: 8 x 11 x 3 cm -
An evolution of the classic balaclava, with a strong mesh over mouth and nostrils, allowing you to breathe freely - even during strenuous tasks - while still providing protection. Lightweight and thin enough to wear under a helmet, as protection from wind and cold, but airy enough to wear in warm weather. The Annaclava is cut long to cover the entire neck well. Flatlock seams for more durability and comfort. Use it as a hat by putting the excess material in the hat. Material: 59% Modacrylic/29% FR Polyester/9% Cotton/3% Elastane -
Not in stock - on order
Mechanism for attaching paper in our sleeves. Have velcro at the back. FBM-10B= Is an international 2-hole mechanism. 85 mm between the rings and the rings have a diameter of 40 mm. Color: Olive -
A strong steel hook for a 40 mm wide belt. -
A lightweight bag for your large handcuffs, which keeps them quiet and secure, easy to use and attaches to the equipment belt. The pouch is securely attached to the belt or vest Suitable for normal and large handcuffs Snap fastener with Velcro The Velcro closure makes it possible to close the pouch quickly and easily. The pouch is fully padded to reduce the rattling of the handcuffs and make the pouch as strong as possible The pouch does not absorb water, does not rot and does not soften in the rain The foldable fastening system makes it possible to attach the pouch to any vest or belt. The pouch can be attached to the belt without removing what is already on the belt. Open the fastening straps on the back of the case. Place the pouch on the outer belt. Thread the fastening strap under the horizontal strap on the pouch and close the fastening straps. Fits in: Handcuffs Beware: Service belt, Leg Platform, Equipment Vest and on the belt Weight: 60 g Dimensions: 11 x 11 x 4 cm -
Not in stock - on order
A padded pouch with drawstring closure. Thick fleece on the inside for protection. Can be used to store sensitive equipment such as night vision goggles. Fits in our Small Oyster pouch.- Weight: 38 g
- Dimensions: 23 x 17 x 2 cm
-
The perfect little bag to dump your empty magazines into during a firefight. Also useful for storing gloves, hearing protection, etc. Use it to store evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things that you don't want in your hands. You wear it rolled up in the bottom of the equipment vest. Pull the square D-ring if you want to open the pouch. Zipper at the top. Accommodates 4 warehouses. Attributes- Article number: 22-00301-56-000
- Weight:160 g
- Dimensions: 24 × 16 × 9 cm
