-
Not in stock - on order
The new Velcro insert panel with much improved ways to be used. This panel makes it possible to attach the insert pockets in the Specialist backpack. Two sizes, one for the 30L and one for the 40L Specialist backpack. Attaches to the Specialist backpack with press studs Surface covered with Velcro loops Holes are punched into the panel, and the elastic cord that comes with the panels can be threaded through the holes to secure the equipment. Attach only one long side and reach the pockets under the panel Fits in: Anything – medical equipment, technical equipment, or personal items Beware: In the Specialist backpack Weight: 80 g Dimensions: 43 × 28 × 1 cm Contents and backpack not included. Just for illustrative purposes. -
The long curved spoon connects the spoon garage on the belt to the backpack. This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. The garage is attached to the combat belt. The outer compartment connects to the backpack. The outer compartment of the double spoon garage 2.0 connects to the backpack with the curved long spoon, which is placed in the adjustable spoon cover. The curved spoon moves with your hips to allow the legs to move freely through the backpack, minimizing energy consumption in your body. -
The webbing sleeve that attaches in the Squeeze vest/plate carrier to connect the long spoon to the spoon garage on the combat belt. Weight:30 g Dimensions: 22 x 5 x 1 cm *Additional equipment for illustrative purposes only. Not included. -
Kenmerken: The I-Bar is mounted where you want to attach your backpack, bag or Specialist backpack small. It can be mounted on any backpack, vest or sternum.How to assemble:
- Thread the strap under the strap on the platform where you want it to be.
- The strap should be laced in the direction the buckle should be pointing when attached.
- Pull the strap through the front hole of the buckle
- Pull the strap through the rear hole of the buckle
- Adjust the length of the belt
- Fasten the Velcro
- Pull the buckle to make sure it's secure
- Attach the other buckles you need
- Attach the bag/backpack etc and make sure the buckles are placed in the correct positions
-
The long spoon that connects the spoon garage on the belt to the spoon sleeve in the pinch vest/plate carrier. *Accessories and images for illustration purposes only. Not included. -
This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. It also has a quick-release buckle so you can quickly shed your backpack if you need to. The garage attaches to the combat belt to connect to the Squeeze plate carrier or vest in the inner pocket. The outer compartment connects to the backpack. The connecting piece is the long spoon or/and the curved long spoon. The long and long curved spoons are not included in the double spoon garage 2.0. *Atmospheric images and additional material for illustrative purposes only. -
The tie-down strap that attaches to our 90-130 liter backpacks and connects the long spoon to the double spoon garage on the combat belt. This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. The outer compartment of the double spoon garage 2.0 connects to the backpack with the curved long spoon, which is placed in the adjustable spoon sleeve. *Atmospheric photos and additional material for illustrative purposes only. Not included in the package. -
Two different mechanisms for attaching paper to our sleeves. Both have Velcro at the back. FBM-10B= Is an international 2-hole mechanism. 85 mm between the rings and the rings have a diameter of 40 mm. 50-00019-01-000= Is a Swedish standard mechanism with 4 holes. Color: Olive -
Attach the pouches to the Velcro panel or in the organized bag 4 color-coded zippered pouches to keep medical or technical equipment organized. Small bags: 18x16x7 cm and large bags: 32x15x7 cm 7 cm high sides Velcro on the back to attach the pockets to the Velcro panel in the Specialist backpack small Color-coded to make it easier to find what you're looking for Fits: Anything – medical equipment, technical equipment, or personal items Beware: In the backpack, specialist, small *Content for illustrative purposes only. -
Not in stock - on order
The perfect pouch to quickly put your empty magazines in during a firefight. Also useful for storing gloves, hearing protection, etc. Use it to put evidence or other important things in during a raid Basically, the pouch is designed to temporarily carry things you don't want in your hands Is worn rolled up in the bottom of the vest Pull the large D-ring when needed The drawstring with drawstring closure at the top can be tightened to tighten the opening of the pouch Capacity: 10L Suitable for: 8-10 x 5.56 magazines, earmuffs, gloves etc. Beware: Equipment vest, belt etc. -
The size is easily changed with the elastic cord. Low profile to make it easier to work in an open hatch or in a car. The elastic cord with heat shrink closure at the top is quick and easy to open Low cut for faster removal of the magazine. 25 mm MOLLE straps on the outside so you can attach other magazine bags to the outside. Two or more warehouse bags can be attached outside each other. Eyelet in the soil to let water through. The Tuck in attachment system makes it possible to attach the pouch to any vest or belt. The mounting system is easy to use on standard 25 mm MOLLE/PALS system. Storage compartments: 1 x 7.62 or 1 x 5.56 magazine or radio, pistol etc. Weight:95 g Dimensions: 8 x 11 x 3 cm -
An evolution of the classic balaclava, with a strong mesh over mouth and nostrils, allowing you to breathe freely - even during strenuous tasks - while still providing protection. Lightweight and thin enough to wear under a helmet, as protection from wind and cold, but airy enough to wear in warm weather. The Annaclava is cut long to cover the entire neck well. Flatlock seams for more durability and comfort. Use it as a hat by putting the excess material in the hat. Material: 59% Modacrylic/29% FR Polyester/9% Cotton/3% Elastane -
Not in stock - on order
Mechanism for attaching paper in our sleeves. Have velcro at the back. FBM-10B= Is an international 2-hole mechanism. 85 mm between the rings and the rings have a diameter of 40 mm. Color: Olive -
A strong steel hook for a 40 mm wide belt. -
A lightweight bag for your large handcuffs, which keeps them quiet and secure, easy to use and attaches to the equipment belt. The pouch is securely attached to the belt or vest Suitable for normal and large handcuffs Snap fastener with Velcro The Velcro closure makes it possible to close the pouch quickly and easily. The pouch is fully padded to reduce the rattling of the handcuffs and make the pouch as strong as possible The pouch does not absorb water, does not rot and does not soften in the rain The foldable fastening system makes it possible to attach the pouch to any vest or belt. The pouch can be attached to the belt without removing what is already on the belt. Open the fastening straps on the back of the case. Place the pouch on the outer belt. Thread the fastening strap under the horizontal strap on the pouch and close the fastening straps. Fits in: Handcuffs Beware: Service belt, Leg Platform, Equipment Vest and on the belt Weight: 60 g Dimensions: 11 x 11 x 4 cm -
Not in stock - on order
A padded pouch with drawstring closure. Thick fleece on the inside for protection. Can be used to store sensitive equipment such as night vision goggles. Fits in our Small Oyster pouch.- Weight: 38 g
- Dimensions: 23 x 17 x 2 cm
-
The perfect little bag to dump your empty magazines into during a firefight. Also useful for storing gloves, hearing protection, etc. Use it to store evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things that you don't want in your hands. You wear it rolled up in the bottom of the equipment vest. Pull the square D-ring if you want to open the pouch. Zipper at the top. Accommodates 4 warehouses. Attributes- Article number: 22-00301-56-000
- Weight:160 g
- Dimensions: 24 × 16 × 9 cm
-
A cool T-shirt with our logo on the chest and on the left sleeve. Grey= 60% Cotton/40% Polyester Olive= 100% Cotton *Note: Images are T-Shirts in Navy and Grey. -
The Snigel GP Pouch 3 2.0 has a removable elastic cord and a pull tab to facilitate use. A light pouch for general use to store small objects. The pouch is designed to be light and take up as little space as possible, while remaining strong enough for military use. Elastic band on the pouch to keep the contents safe even when the valve is open. Pull tab on the flap to open it easily, even with gloves on. Velcro flap and pull tab for easy opening The flap can be slid into the pouch and secured with Velcro, making it easier to access the items you carry in the case. Drain hole at the bottom. Thanks to the folding system, the pouch can be attached to any vest or belt. The bag has foldable Velcro straps at the back so that the bag can be worn horizontally on the belt. To wear it vertically, use the quiet and easy-to-use fold back system on the back of the case. This system makes it possible to attach the pouch without removing other pouches from the belt. Capacity: 0,2L Fits: Pepper spray short, short wide flash bulbs, distraction grenades, 40mm grenades, GPS, cell phone Fits: Equipment vest, belt, leg plate or leg mount. -
Not in stock - on order
A very light and tight belt with integrated compartments for secretly carrying equipment. Two layers of elastic keep your equipment safe and tight against the body. Stores communications equipment, baton, tear gas spray, pistol magazines, 5.56 magazines, a flashlight and other supplies for surveillance and security operations in 12 compartments. The bottom of each compartment can be opened with Velcro. Detachable plastic gun holster makes it easy to holster your gun. Velcro closed front. Adjustable elastic cord at the back. One size fits all Black only Weight: 400 grams Dimensions: 125 x 12 x 3 cm *No strap capacity included. -
A very light and waterproof backpack. Packed, it takes up only 2 liters of space. It is completely waterproof with taped seams and a roll closure at the top. Two flat 50 mm wide shoulder straps and one chest strap. Rolled ends on all tires to keep them tight. M7810-116011 KOMBI RYGGBRÄDA T, Kolli 2 Size: 30L. Dimensions: W=27, H=50 & D=18 cm. Weight: 340 g -
A practical model that has been used and refined for a long time, the product of years of development. A practical outer pocket with Velcro closure, to have ID:s or similar cards at hand. Two loops for a string (not included) in the top edge of the wallet, making it possible to carry the wallet around the neck with an ID card visible. On the inside a Velcro closed compartment for coins, two windows for ID cards and 4 pockets for credit or parking cards etc. There is also a box for membership cards etc. On the inside there is a full-width compartment for banknotes with a partition for storing foreign notes separately. Smaller pockets are sewn on the back of the inside to store business cards etc. Fits: Money, credit card, ID card etc. Beware: In your hand, around your neck or in your pocket -
A grey and black Snigel patch with the text POLICE. 90 X 25 mm. Velcro on the back, so that the patch can be attached to Velcro surfaces of bags and bags. *Image with stylo illustrating size. -
A grey and black Snigel patch with the text POLICE. 250 x 50 mm. Velcro on the back, so that the patch can be attached to Velcro surfaces of bags and bags. -
A case to store your documentation equipment, maps, pens, etc. in a place where you can reach and see them when you move. Attach it to the front of the vest or chest. Attach your normal pouches to the outside of this case. Compartment for cards, pens and paper. Includes ring binder mechanism with Velcro that can be easily removed. Cords to secure the pins. Half-covered holder for a cyalume, so you can see what you're looking at in the dark with minimal exposure. Water repellent and strong to protect the content. Fold-back mounting system makes it possible to attach the pouch to any equipment or ballistic vest with MOLLE straps. Cable openings in the bottom. Fits: A5 paper and block, pens, rubber, small ruler, small tablet computer (e.g. iPad™ or Panasonic Toughpad FZ-M1™), cards, light sticks and memo cards. Beware: On the equipment vest Weight: 370 g Dimensions: 21 × 27 × 4 cm *Contents in the pouches are purely illustrative. No content included. -
A grey and black patch with the text PRESS. 260 x 50 mm. Velcro on the back so that the patch can be attached to loop-shaped Velcro surfaces on bags and pouches. -
A grey and black patch with the dog's head and the text K9. 70 mm. Velcro on the back so that the patch can be attached to Velcro surfaces of bags and pouches. -
A grey and black patch with the text MOE for Method Of Entry. 50 x 25 mm. Velcro on the back, so that the patch can be attached to Velcro surfaces of bags and bags. -
The perfect little bag to put your empty magazines in during a firefight. Also good for storing gloves, hearing protectors, etc. Use it to preserve evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things you don't want in your hands. Rolled up in the bottom of the equipment vest, under another pouch it does not take up any space.... Pull the square ring down, naturally, when you want to open the case. Suitable for 4 warehouses. Attributes Weight:100 g Dimensions:4 x 12 x 35 cm Color: Black or Grey -
Has a removable elastic cord and a pull tab to facilitate the use of the pouch- A tight general pocket to store small objects.
- The pouch is designed to be as lightweight and space-free as possible, while remaining strong enough for military use.
- Velcro closed flap with pull tab on the flap for easy opening even with gloves on.
- The flap can be pushed into the pocket for easier access to the thing you're carrying in the pouch.
- Elastic cord, on the pouch to secure the contents, even when the valve is open. The cord can be removed.
- Bottom drain hole.
- Fold back fastening system makes it possible to attach the bag to any equipment, vest or belt.
- It has Velcro straps on the back so that it can be worn horizontally on the belt.
- It fits: Pistol magazine, multitool, flash light or other similar objects.
-
Not in stock - on order
This is a shorter replacement version, 75 cm long, of the regular backpack strap. (The regular belt is 83 cm long). The belt can also be used for our specialist backpacks. Attributes- Article number: 26-00910-09-001
- Weight: 500 g
- Dimensions: 100 x 14 x 2 cm
-
Not in stock - on order
No stock item. It is made to order and normally has a delivery time of 16 weeks. If you order 50 or more, the price drops, but the delivery time increases to about six months. Pieces can also be obtained separately.
