- Includes Rear pod + extended bungee cord
- The rear pocket integrates seamlessly with the Mohawk, Mohawk Air and Gen4 Lo-Pro helmet covers.
- Provides mission-specific customizability.
- Securely attached to the helmet with Velcro, Velcro under tabs and milspec bungee cord.
- Provides new advanced functionality and universal accessory management.
- Uses a new versatile rear flex cell that fits all common NVG battery packs and counterweights.
- Has strategically placed outputs for all cables.
- The semi-rigid exterior of the cell provides the rear accessories with additional protection against impact and has a central loop for ID patches.
-
The semi-rigid exterior of the pouch provides additional impact protection for rear accessories and has a central loop for ID patches. It also has a lower storage compartment for PTT cables when not in use. It's securely and securely connected and yet can be put on and off in about 60 seconds, so you can connect or unplug depending on your mission set. -
The Agilite Pincer Placard™ is an elastic placard with hook backing that can hold three 5.56 magazines. Thanks to the revolutionary, patent-pending funnel-shaped magwell design, you can grab or re-index a warehouse with just one hand, while still maintaining a rock-solid retention so your magazines never fall out. Elastic warehouse bags are popular because of their easy access and low profile. However, they all have 1 of the 2 flaws: Either they are too closed, so it is almost impossible to re-enter a warehouse with 1 hand. Or they're too loose for you to reposition a magazine, but you have to worry about it falling out because of unreliable retention. The Pincer Placard™ solves both problems and gives you the best of all worlds. The patent-pending funnel-shaped magwells guide your magazines into the bags, so you can re-insert a warehouse with just one hand without any problems. Despite this possibility, the forceps pockets still hold the magazines tightly, so you never have to worry about losing them. The Pincer Placard™ comes standard with both MOLLE placard buckles and G hooks and has a built-in height adjustment capability so that it fits not only on Agilite plate carriers, but also on any placard-compatible plate carrier and instantly gets a perfect fit. It also has laser-cut loops on the side for attachment to common chest harness systems. The base of the Pincer placard is made of laser-cut Mil-Spec Squadron material that allows water drainage but covers the ends of your magazines to protect them from dust, dirt, and wear that can cause weapon failure. The Polymer magwells give elastic pouches long-lasting reliable retention and superior durability where they normally fall apart. While not required, the Placard also has a loop interior, so you can add Agilite Jump Retention tabs if your unit's regulations require for skydiving, rotating or maritime operations or if you just want to add an extra layer of retention. They include Agilite's patented AG™ technology with polymer pull tabs, so even when applied, they give you unhindered one-handed access to your magazines. Whether you're defending your country on the tip of the spear or defending your family, the Agilite Pincer Placard gives you an edge. Details:- Suitable for three 5.56 warehouses
- Magazine bag with brackets for plate carriers
- Patented funnel-shaped warehouse tubes guide the warehouse to the optimal insertion point, so the magazine doesn't get stuck and can be re-indexed quickly
- Polymer magwells give elastic pouches long-lasting reliable retention and superior durability
- Attaches to any Agilite or other plate carrier or backpack in seconds
- Built-in ability to adjust the height for perfect positioning of the plate carrier
- Compatible with both G Hook and Placard Buckle (both included with the product)
- Allows the warehouse to be quietly picked up or reinserted
- Designed, tested and tested in battle in Israel
- Suitable for three 5.56 warehouses
- Weight: 181 grams
- Dimensions: 25cm*9cm (9.8" x 3.5")
- Patent pending durable polymer magwells
- Patented mil-spec G hooks
- Including mil-spec polymer MOLLE Placard buckles
- Laser-cut Squadron mil-spec laminate fabric
-
The Agilite Modular Assault Pack III or "AMAP III" is the most versatile and universal military attack package on the market. Designed, battle-tested and proven in Israel and behind enemy lines with the IDF's most elite units. It has plenty of unique features and capabilities that no other attack package has. Decades of experience in Israeli combat has taught us that it is necessary to be able to carry a decent load on a platform that is not cumbersome, cannot move and that maintains a low profile during CQB, Rotary and Vehicle-based operations. The AMAP3 is an Assault/EDC Crossover pack that ranges from super low-profile for short raids (4 liters), to carrying significant payloads for longer missions or mid-mission changes (18 liters +8 liter Beavertail). We've all been in short raids that turned into multiple day operations without warning. The ability to carry extra gear comfortably and directly without bulky additional backpacks is critical. The AMAP III takes versatility and universality to a new level. It works with plate carriers, helmets, molle bags, Velcro bags, hydration radios and antennas, laptops, harnesses, sleeping bags, sniper mats. It attaches directly to Agilite plate carriers and other plate carriers (via conversion kit). It functions as an independent attack package, as well as a crossover EDC package. It's just as comfortable on the battlefield as it is for weekend trips. Thanks to the new clamshell opening and military-grade full loop interior, you can add countless Velcro bags, in any configuration that best suits your MOS or EDC needs, and can change constantly and indefinitely as your missions do. Additional features include a newly reworked beaver tail design that allows you to wear helmets, clothing, and other items. Multi-directional mounting options for sniper mats and additional equipment. Communication, hydration and antenna output ports and storage options, CCW trekking capability, three-density fusion foam comfort padding, detachable shoulder straps, and reinforced laser-cut molle and placard mounting capabilities. It also has secure admin space for small, easy-to-lose items. Part of the secret to the excessive comfort and versatility of the AMAP III is that this system has been refined and perfected through constant feedback from intense, daily real-world Israeli missions over so many years. The 3rd generation of AMAP, every feature in this package is based on accumulated experience, there are no shortcuts. The AMAP3 has an optional EDC insert kit that consists of a smartly lined laptop sleeve and an administrator dashboard. This allows you to run your AMAP III downrange and switch to a completely different configuration within seconds when you go on leave or for weekend trips. The AMAP III works as a premium attack package with fusion foam shoulder straps now standard, but in addition, it is the first Agilite Assault package that can be attached not only directly to Agilite plate carriers, but also to any plate carrier with Molle through a mounting kit. No MOLLE or other timely and clumsy fastening methods are needed. By attaching your AMAP III to your plate carrier, your entire gear and survival system is removed in an instant. whether you need to catch the HELO or when facing a villain, you have everything in one grip, reducing your reaction time. It also means that in a firefight, you don't have shoulder pads on shoulder pads, all of which move independently and unnecessarily accumulate and weld your shoulders. The AMAP III is lightweight yet built with the best mil-spec materials. It was built to survive more than a decade of non-stop use in extremely aggressive military environments. It has traveled many miles and crossed borders to some of the world's most dangerous places, to bring you the most intelligent and versatile attack pack on earth. Details:- Most versatile and universal attack package on the market
- Crossover EDC package for extra daily use
- Designed, tested and proven in battle in Israel
- Can be used with shoulder straps or attached directly to the Agilite K19 Plate Carrier and K5 Plate Carrier.
- Compatible with Swift Clip poster and chest rigs to add extra carrying capacity.
- Advanced new patented beaver tail design for wearing helmets, clothing and other equipment.
- Goes from flat and low profile (4 liters) to fully expanded (14 liters) capacity in seconds, with an additional 8 liter beaver tail space and other external carrying capabilities.
- Beavertail becomes extra administration compartment
- Detachable shoulder straps
- Attaches directly to non-Agilite plate trays using the AMAP III conversion kit (sold separately)
- Side and bottom extra carrying capacity for securely attaching clothes, sleeping bags, sniper mats etc.
- Low profile design for use in CQB, Rotary or vehicle-based operations
- Administration pocket with zipper for smaller items.
- Triple Layer Fusion Foam padding and rear airflow duct for extreme comfort
- Designated hydration compartment
- Optional EDC insert set for laptops and other EDC items.
- Full clamshell opening and full Velcro® interior to attach hook bags
- Built-in ports for hydration and communication tubes and cables
- Left and right output ports for radio antennas and longer items
- Compatible with Agilite K-Series™
- 500D CORDURA® brand Mil Spec. Nylon
- Mil Spec polymer buckles and hardware
- YKK Zips
- Velcro® Fire mounting platform
- Minus. volume 4 liters, max. volume 18 liters + additional 8 liter Beavertail compartment
- Laser cut Velcro MOLLE overlay panels
- Dimensions back panel with Velcro: 25cm*9cm (9.8" x 3.5")
- Triple Density Fusion Foam shoulder and back comfort pad
- Weight: 2.13 lbs (0.96 kg)
- Height: 15.7" (40cm)
- Width: 11" (28cm)
- Depth: 7.8" (20cm)
-
Version 3.0 The K19 is the ultimate modern plate carrier. Designed, tested and proven in battle in Israel and behind enemy lines with some of the IDF's most elite units. The K19 has many subtle but revolutionary features that no other plate carrier has. When it comes to the belly band, we have thought of everything. Many modern plate carriers now use quick release mechanisms, but they always come at the expense of not being able to easily adjust the fit. The K19 uses our Egress™ Quick-release system and patented Fast-Adjust™ Cummerbund that can be adjusted and refined by the wearer in real time. Getting the perfect fit can depend on your specific mission gear, what you're wearing underneath (which can change halfway through the mission), or even how much you ate for lunch. We know that the ability to customize it yourself, on-the-fly, is critical to avoid unnecessary fatigue and impaired combat awareness. The K19 has a one-size-fits-all belly band and multi-size plate bag, eliminating the need to make complicated and risky size choices when buying. You know it will always suit you or members of your team, regardless of your gear or mission set. This is also important for procurement professionals who can be sure that it is a good fit for all their boys (or girls). The quick-adjustable belly strap also has a built-in stretch element that allows the vest to be pulled nice and tight so it doesn't bounce when you run, but that gives you that inch or so of stretch needed when you fall on a knee so the wearer doesn't flatten their torso. The latest version of the K19 is also compatible with placard, with both upper attachment points and a new laser-cut loop overlay. This new layer gives you the best of all worlds. It allows you to either directly add velcro placards, or use the mil spec, bartacked molle underneath to attach ordinary molle bags. Unlike other carriers, the quick-release fasteners in the shoulder area are placed far back so they don't interfere with your rifle stock and are still easily accessible. When it comes to comfort, the K19 shares many of the comfort features of the battle-proven Agilite K5, which is considered the most comfortable plate carrier on the market. Such comfort features include a generous melting foam shoulder pad for extreme comfort even with prolonged use. Anyone who has spent time in the military knows that even the shortest missions can culminate in multiple day operations. Comfort is not a luxury, it is a necessity to stay alert and not be distracted in hostile environments where complacency can cost you your life. One of the secrets of the K19's comfort level is that the shoulder straps create a patented "V" shape for the mass that distributes the weight over the maximum surface and relieves the pressure points. The back of the K19 plate bags has a triple layer of low-profile fusion foam to stay comfortable even when using the K19 with hardened steel or ceramic armor plates. Steel or ceramic plates often have hard corners and edges that can dig into your hull when using regular plate carriers, but the K19 has inherent padding to prevent this. The K19 is also compatible with the Agilite K-series, which means it has the ability to attach the AMAP III Assault package directly to it within seconds. No getting MOLLE, no hassle. At the back, the belly strap has numerous attachment points for the mil-spec G hooks, allowing a perfect fit for everyone, from the largest to the smallest person, without making the plate carrier unnecessarily large or prohibitively small. The K19 has grown from the front lines of the Israeli Special Forces to one of the best-selling plate carriers in the US. It has traveled many miles and crossed borders to some of the most dangerous places in the world to bring you one of the most detailed and thoughtful plate carriers on earth. Details- Integrated Egress™ Quick-release system
- Patented one-size-fits-all Fast-Adjust™ Cumberband that can be adjusted by the wearer in real time.
- Shoulder exit buckle are positioned backwards so that they do not interfere with the placement of the rifle stock
- One-size plate bag with internal controller to fit perfectly on all common board sizes (SAPI S, M or L-see size chart for exact details).
- One-Size-fits-all belly band-no risks or size decisions to be made during purchase-fit for very small-very large people.
- Suitable for plates
- Administration pocket with zipper at the front
- Fusion foam shoulder pad for long-term comfort
- Patented "V" design distributes the weight over the maximum surface area of the shoulders to the center of the mass to avoid pressure points.
- Rear tow lever
- Skeletal shoulders for communication and drinking tubes
- Laser-cut Velcro panels front and rear
- Agilite K Series™ compatible
- Designed, tested and proven in battle in Israel
- 1000D CORDURA® Mil Spec Tactical Nylon
- Mil Spec polymer buckles and hardware
- Egress™ Quick-release system and patented Fast-Adjust™ Cumberband.
- Laser cut Velcro MOLLE overlay panels
- Fits any size S, M or L SAPI/ESAPI plates up to 1.5 inches thick
- Fits all 10" X12" plates
- Dimensions chest panel with Velcro: 25cm*9cm (9.8" x 3.5")
- Laser Engraved Mil Spec Polymer Cord Pullers
- Weight: 2.5 lbs (1.1 kg) including Fast-Adjust Cummerbund™