- Fast, ambidextrous deployment.
- Integrated External Combat Turnstile Holder
- External 6" trauma scissor holder.
- Micro MOLLE attachment optimized for combat belts.
- Optional mounting for plate carrier (sold separately).
- Internal organization with 4 pockets and space for a decompression needle or marker.
-
Not in stock - on order
The Agilite MD2™ is a smart, compact trauma kit designed for superior uptime and performance. It contains essential life-saving medical supplies and has an exceptionally low profile. -
The Gen4 is a next-generation helmet cover that fits like a glove, giving the helmet new advanced functionality and universal accessory management. The Gen 4 helmet cover provides color or camouflage uniformity, protects the painted ballistic surface of the helmet, and serves as a rock-solid platform that secures all accessories, preventing loss or damage. This super-high cut helmet cover protects the ballistic and painted surface of your Ops Core FAST SF/MT and extends its life and gives you full management of accessories. Features include cable channels on the left and right sides, smooth sides without hooks, and an upper bungee accessory management area for IR flashes, cameras, and more with mil-spec polymer holders with laser-engraved Agilite scorpions. Optional universal rear bag The case features an optional detachable universal rear bag that fits all common NVG batteries, counterweights and strategically placed output holes for all cables. The semi-rigid exterior of the pouch gives accessories on the back extra protection against bumps and has a central loop for ID patches. It also has a lower storage compartment for PTT communication cables when not in use. The rear bag integrates seamlessly with the OPS-CORE FAST SF or MT SUPER HIGH CUT HELMET cover, and is securely and securely connected and yet it can be put on and taken off in about 60 seconds, allowing you to plug in or disconnect depending on your mission set. The Agilite Gen4 Ops Core helmet cover is easy to apply or remove in seconds. It is made from durable mil-spec materials and is designed, tested and manufactured in Israel. • Fits the Ops Core FAST SF & Ops Core Ops Core FAST MT (also known as "Maritime" or "Super high cut") • Agilite precise fit • Optional universal rear cell fits all common batteries/counterweights • Patented rear pod provides impact protection for batteries. • Output openings for all common NVG Battery box cables/switches • Next-generation central bungee retention with lower profile for IR flashes, cameras, etc. • Integrated cable management channels • Full spectrum, rock-solid accessory platform • Easy installation - can be mounted on the helmet in seconds Specs • Weight: 5oz (143g) • 1000D tactical nylon • Flat polyester mesh 380g/m2 • Laser engraved polymer bungee channels • Rear loops for AA and CR123 NVG batteries • Made in Israel ! ATTENTION! REAR POUCH NOT INCLUDED ! Sizing This helmet cover fits the following helmets:Helmet | Helmet Size What Helmet Cover Size Do I Need? Ops-Core FAST SF Super High Cut Helmet Medium or S/M Medium Ops-Core FAST SF Super High Cut Helmet Large or M/L Large Ops-Core FAST SF Super High Cut Helmet XL or L/XL XL Ops-Core FAST MT Super High Cut Helmet Medium or S/M Medium Ops-Core FAST MT Super High Cut Helmet Large or M/L Large Ops-Core FAST MT Super High Cut Helmet XL or L/XL XL Ops-Core FAST Maritime Super High Cut Helmet Medium or S/M Medium Ops-Core FAST Maritime Super High Cut Helmet Large or M/L Large Ops-Core FAST Maritime Super High Cut Helmet XL or L/XL XL FMA Maritime M/L Medium FMA Maritime L/XL Large -
The Agilite Gen4 is a new generation helmet cover that fits like a glove and gives the helmet new cutting edge functionality and universal accessory management. The Gen 4 Ops-Core helmet cover provides color or camo uniformity, protects the helmet painted ballistic surface and serves as a rock solid platform that secures all accessories, preventing loss or damage. This high cut helmet cover protects the ballistics and painted surface of your Ops Core FAST ST/XP and extends its life as well as gives you full accessory management. Features include left and right cable management channels, smooth, snag-free sides and an upper bungee accessory management area for IR flashes, cameras and more that mil-spec polymer holders with laser-engraved Agilite scorpion features. Optional universal back pocket The Helmet Cover features an optional detachable universal back pocket that fits all common NVG batteries, counterweights and has strategically placed output holes for all cables. The semi-rigid pouch exterior gives rear accessories extra protection against bumps and has a central loop area for ID patches. The bag also has a lower storage compartment for communication PTT cables when not in use. The back pouch integrates seamlessly with the OPS-CORE FAST ST/XP HIGH CUT HELMET cover, and is securely and securely connected and yet, it can be put on and off in about 60 seconds, allowing you to plug in or unplug depending on your mission set. The Agilite Gen4 Ops Core helmet cover is easy to apply or remove in seconds. It is made from durable mil-spec materials and is designed, battle-tested and produced in Israel.- This Ops-Core Helmet Cover fits the OPS-CORE FAST Ballistic ST and the OPS-CORE FAST Ballistic XP
- Agilite precise fit
- Optional universal rear cell fits all common Battery Packs/Counterweights
- The patented rear cell provides impact protection for battery packs.
- Output holes for all common NVG Battery box cables/switches
- Central bungee retention for IR flashes, cameras etc.
- Integrated cable management channels
- Full spectrum, rock-solid accessories platform
- Easy installation - can be mounted on the helmet in seconds
- Weight: 5oz (143g)
- 1000D Tactical Nylon
- Polyester mesh 380g/m2
- Laser-engraved polymer bungee channels
- Rear loops for AA and CR123 NVG Batteries
- Made in Israel
Helmet | Helmet Size What Helmet Cover Size Do I Need? Ops-Core FAST XP High Cut Ballistic Helmet Medium or S/M Medium Ops-Core FAST XP High Cut Ballistic Helmet Large or M/L Large Ops-Core FAST XP High Cut Ballistic Helmet XL or L/XL XL Ops-Core FAST ST High Cut Ballistic Helmet Medium or S/M Medium Ops-Core FAST ST High Cut Ballistic Helmet Large or M/L Large Ops-Core FAST ST High Cut Ballistic Helmet XL or L/XL XL FMA Ballistic High Cut XP Helmet Medium or S/M Large FMA Ballistic High Cut XP Helmet Large or M/L XL -
Not in stock - on order
The Agilite Gen4 MTEK Version is a new generation helmet cover that fits the MTEK FLUX helmet like a glove and offers it new, advanced functionality and universal accessory management. It uses a new versatile rear flex cell that fits all common NVG battery packs, counterweights and has strategically placed output holes for all cables. The semi-rigid exterior of the cell provides additional protection against impact rear accessories and has a central loop for ID patches. The Gen 4 helmet cover ensures uniformity in color or camo, protects the painted ballistic surface of the helmet and serves as a rock-solid platform that secures all accessories, preventing loss or damage. Details- Fits the MTEK FLUX Ballistic, MTEK FLUX Carbon
- Agilite precise fit
- Patented rear cell provides impact protection for battery packs.
- Output holes for all common NVG battery cables/switches
- New generation central bungee mount for IR flashes, cameras etc.
- Integrated cable management channels
- Full spectrum, rock-solid accessory platform
- Easy installation - can be mounted on the helmet in seconds
- Weight: 5oz (143g)
- 1000D Tactical Nylon
- Flat Polyester Mesh 380g/m2
- Laser-engraved polymer bungee channels
- Rear loops for AA and CR123 NVG batteries
- Made in Israel
-
The Agilite Bridge is the most advanced and versatile helmet accessory system on the market. It is a one-size, fits-all tactical helmet accessories platform that is designed to fit almost all common tactical helmets and almost all common helmet accessories, including NVG battery packs, counterweights, IR strobes, cables, flags and more. The Bridge uses the existing Velcro layout on modern military helmets to create a rock-solid accessory platform to prevent loss or damage. It comes with two wing size options to get the perfect fit on any tactical helmet, regardless of shape or size. The Bridge has a new generation central bungee retention for the same ability to clamp accessories, but with a new design with Mil-Spec, laser engraved polymer channels for zero hooks, a lower profile and improved retention. The back of the bridge is incredibly unique. It features a universal pod that expands and shrinks both vertically and horizontally to perfectly accommodate all common NVG battery packs, including those of the GPNVG-18, AN/PVS-31, AN/PVS-23, F5050, AVS-6 and ANVIS9. The pod has strategically placed outputs for all cable outputs and power switches. The exterior features semi-rigid polymer protection to prevent damage to the battery holders when the helmets fall or are bumped. The universal rear pod can also be squashed when not in use. The rear pod is so versatile that it can accommodate all common counterweights and battery boxes, but also offers the possibility to use undesignated objects that you already carry with you, such as radio batteries, as a counterweight. The rear pod also has elastic loops for storing AA or CR123 NVG batteries and the ability to store Comms PTT and other cables when not in use. The bottom has shock cord loops that make it possible to store the PTT cables when not in use so that they do not dangle. Unlike other helmet mounts that are only on the outside of the helmet, the back of the Bridge has loop lips that grip into the helmet's internal Velcro loop, greatly strengthening it at the back. The front "wings" lock the front of the bridge, creating a rock-solid platform. The bridge is manufactured in Israel and is designed based on input from our own team and SOF Operators in Israel, the US and other countries. Attributes- One Size System - fits all common tactical helmets
- Universal rear pod for all common battery packs/counterweights
- Patented rear pod provides impact protection for battery packs.
- Output holes for all common NVG battery cables/switches
- New generation central bungee mount for IR flashes, cameras etc.
- Integrated cable management channels
- Velcro pattern inside and outside the helmet for a rock-solid accessory platform
- Easy installation - can be applied to the helmet in seconds
- Available in Coyote Tan, Ranger Green, Black and other colors on request.
- Weight: 5.34oz (152g)
- Supplied with 2 wing sizes as standard for a perfect fit.
- Mil Spec materials and polymer hardware
- Laser-engraved polymer bungee channels
- Own universal rear pod and next gen central retention
- Rear loops for AA and CR123 NVG batteries
- Made in Israel
-
The Agilite Team Wendy Helmet BUMP Cover protects the integrity and painted surface of your Team Wendy BUMP helmet, extends its life and gives you full accessory management. It fits like a glove on the Exfil shell and is suitable for both the Exfil Carbon and the Exfil LTP helmets, so you have a perfect fit for both. Unique features of the cover include the left and right cable routing channels, smooth, zipper-free sides and an upper bungee accessory management area for IR flashes, cameras, etc.dat features mil-spec polymer holders with laser-engraved Agilite scorpions. The mesh portion of the cover is strategically placed to allow free airflow into the helmet's ventilation holes and keep you cool within range. The cover also has an exit at the back, so the Team Wendy Exfil rear 'V' shaped shock cord can be removed and used even when the cover is on. The cover also extends over and protects the front lip of the helmet, which is a vulnerable spot and usually the first spot where the paint peels off. The Agilite Team Wendy Exfil BUMP cover is easy to apply or remove in seconds. It is made from durable mil-spec materials and is designed, tested and manufactured in Israel. A Berry-compliant version is also available for bulk orders on request. Sizing - Team Wendy EXFIL Bump LTP/Carbon helmet cover available in 2 sizes: M/L and L/XL - Fits all Team Wendy Bump Helmets Including: - Team Wendy Exfil Carbon (Rails 2.0 & 3.0) - Team Wendy Exfil LTP Helmet ((Rails 2.0 & 3.0) Specs Weight: 5oz (143g) - 1000D tactical nylon - Flat Polyester Mesh 380g/m2 - Laser engraved polymer bungee channels - Back loops for AA and CR123 NVG batteries - Made in Israel Details - Fits all Team Wendy Bump Helmets Including: - Team Wendy Exfil Carbon (Rails 2.0 & 3.0) - Team Wendy Exfil LTP Helmet (Rails 2.0 & 3.0) - Agilite precise fit - Next generation lower profile central bungee retention for IR flashes, cameras etc. - Integrated cable management channels - Full spectrum, rock-solid accessory platform - Easy installation - can be mounted on the helmet in seconds ATTENTION: Rear pouch not included. You can order it separately here. -
The Agilite Team Wendy Helmet Cover protects the ballistics and lacquered surface of your Team Wendy Exfil helmet, extends its life and gives you full accessory management. It fits the Exfil shell like a glove and is suitable for all rail types (both rail 2.0 and Rail 3.0). Two foldable tabs on the side fold in for the Rail 2.0 and out for the Rail 3.0, so that both fit perfectly. Unique features of the cover include the left and right cable management channels, smooth, snag-free sides and an upper bungee accessory management area for IR flashes, cameras and more that features mil-spec polymer holders with laser-engraved Agilite scorpions. The Agilite Team Wendy Exfil Ballistic cover is easy to apply or remove in seconds. It is made from durable mil-spec materials and is designed, tested and manufactured in Israel. A Berry Compliant version is also available for bulk orders on demand - For details, email us. Details Fits all Team Wendy Exfil Ballistic helmets, including:- Team Wendy Exfil Ballistic with Rails 2.0 or 3.0.
- Team Wendy Exfil Ballistic SL with Rails 2.0 or 3.0.
- Next generation lower profile central bungee retention for IR flashes, cameras etc.
- Integrated cable management channels
- Full spectrum, rock-solid accessory platform
- Easy installation - can be mounted on the helmet in seconds
- Weight: 5oz (143g)
- 1000D Tactical Nylon
- Flat Polyester Mesh 380g/m2
- Laser-engraved polymer bungee channels
- Rear loops for AA and CR123 NVG batteries
- Made in Israel
-
Not in stock - on order
Side plates are vital to staying alive in a gunfight, but are often bulky and clunky. The Agilite Flank™ side plate carriers ensure that your side plates have a low profile, are comfortable and integrate seamlessly with your Plate Carrier. - Incredibly low profile and lightweight for maneuvering in tight CQB environments - Fits 6"X6" or 6"X8" side plates - Can be mounted both internally and externally via MOLLE low-profile mounting - Integrated low profile rib cage to prevent chafing - Compatible with all MOLLE Cummerbunds including the K-Zero Plate Carrier (internal mount), K19 Plate Carrier (external mount) and WarFighter™ Cummerbund. Sizing - Fits 6"X6" or 6"X8" side plates (including Blindside™ side plates) - Compatible with the following Agilite platforms: K-Zero plate carrier (internally mounted) K19 plate carrier (externally mounted) Warfighter™ garter (internally mounted) **FLANK™ SIDE PLATE CARRIERS ARE SUPPLIED IN PAIRS** Dimensions: 7*6.5*8 inch(18*17*20cm) Weight: 90gr Materials: - Laser cut Velcro overlay panels - 500D CORDURA ® Mil Spec Tactical Nylon *plate carrier not included, for illustrative purposes only. -
Agilite Retractor ballistic side plate carriers allow you to add additional ballistic protection to your installation to give you extra vital organ protection when used in high threat environments. They can be connected to ANY MOLLE Cummerbund or other MOLLE platform, not just Agilite platforms, and are lightweight, wear-resistant and intelligently designed to be the only side plate carriers you will ever need. The unique Israeli design ensures that a standard Special Forces 6 "X6" plate fits perfectly, but also expands directly to fit a 6"X8" Infantry issued plate, just a sine if you have missions that require extra coverage or if that's all you have access to during a deployment. Designed, tested and manufactured in Israel, they fit into SAPI. ESAPI or other common ballistic side plates up to 1 inch thick. Retractor side plate carriers can also be used to hold non-ballistic training plates to prepare you for the front lines and make your Crossfit or other training session more serious and challenging. Note: Side plate carriers with retractor are non-ballistic and are not export restricted - they are only a carrier platform for ballistic side plates. Specs:- Mil Spec 1000d tactical nylon
- Includes Agilite polymer handle
- Made in Israel
-
The Agilite Pincer Placard™ is an elastic placard with hook backing that can hold three 5.56 magazines. Thanks to the revolutionary, patent-pending funnel-shaped magwell design, you can grab or re-index a warehouse with just one hand, while still maintaining a rock-solid retention so your magazines never fall out. Elastic warehouse bags are popular because of their easy access and low profile. However, they all have 1 of the 2 flaws: Either they are too closed, so it is almost impossible to re-enter a warehouse with 1 hand. Or they're too loose for you to reposition a magazine, but you have to worry about it falling out because of unreliable retention. The Pincer Placard™ solves both problems and gives you the best of all worlds. The patent-pending funnel-shaped magwells guide your magazines into the bags, so you can re-insert a warehouse with just one hand without any problems. Despite this possibility, the forceps pockets still hold the magazines tightly, so you never have to worry about losing them. The Pincer Placard™ comes standard with both MOLLE placard buckles and G hooks and has a built-in height adjustment capability so that it fits not only on Agilite plate carriers, but also on any placard-compatible plate carrier and instantly gets a perfect fit. It also has laser-cut loops on the side for attachment to common chest harness systems. The base of the Pincer placard is made of laser-cut Mil-Spec Squadron material that allows water drainage but covers the ends of your magazines to protect them from dust, dirt, and wear that can cause weapon failure. The Polymer magwells give elastic pouches long-lasting reliable retention and superior durability where they normally fall apart. While not required, the Placard also has a loop interior, so you can add Agilite Jump Retention tabs if your unit's regulations require for skydiving, rotating or maritime operations or if you just want to add an extra layer of retention. They include Agilite's patented AG™ technology with polymer pull tabs, so even when applied, they give you unhindered one-handed access to your magazines. Whether you're defending your country on the tip of the spear or defending your family, the Agilite Pincer Placard gives you an edge. Details:- Suitable for three 5.56 warehouses
- Magazine bag with brackets for plate carriers
- Patented funnel-shaped warehouse tubes guide the warehouse to the optimal insertion point, so the magazine doesn't get stuck and can be re-indexed quickly
- Polymer magwells give elastic pouches long-lasting reliable retention and superior durability
- Attaches to any Agilite or other plate carrier or backpack in seconds
- Built-in ability to adjust the height for perfect positioning of the plate carrier
- Compatible with both G Hook and Placard Buckle (both included with the product)
- Allows the warehouse to be quietly picked up or reinserted
- Designed, tested and tested in battle in Israel
- Suitable for three 5.56 warehouses
- Weight: 181 grams
- Dimensions: 25cm*9cm (9.8" x 3.5")
- Patent pending durable polymer magwells
- Patented mil-spec G hooks
- Including mil-spec polymer MOLLE Placard buckles
- Laser-cut Squadron mil-spec laminate fabric
-
The Agilite BuddyStrap™ is a life-saving emergency aid device that allows you to carry an injured person easily and hands-free. It was originally designed for tier 1 special forces units that go deep behind enemy lines in small teams and cannot carry bulky rescue equipment. Although the demand came from the army, the BuddyStrap™ has numerous civilian applications. It is the only efficient way to carry an injured hiker, a person with mobility problems or a large child alone. No responsible person should go into nature without a plan to bring an injured friend or family member to safety without help. It is an essential part of any gear, hiking backpack or bug out bag. Traditional medevac equipment takes at least 2 to 4 rifles. The fireman's carry takes one rifle out of the fight, but the BuddyStrap™ takes zero rifles out of the fight. Nowadays, most people wear a medkit for the first treatment, but those who wear a BuddyStrap™ also have the option to bring their buddy home. Size One size fits all- Including Plate Carry Attachment Kit for connection to plate carriers
- Fits in any backpack
- Dimensions (packed): 3.9"x10"x3.5"
- 500D CORDURA® Mil Spec Tactical Nylon.
- Mil Spec buckles and straps
- Dimensions (packed): 3.9"x10"x3.5"
- Weight: 588 grams
- Hikers and search and rescue volunteers
- Parents
- Carrying people with mobility problems
- Military, law enforcement and vigilant civilians
- Essential part for every hiking backpack, bug out bag, equipment.
- Includes free mounting kit for plate holder and 2 MOLLE mounting buckles
- Allows you to carry an injured person hands-free and more comfortable
- Tried and tested and used by Special Forces worldwide.
- Compact, lightweight but can save lives
- Designed and proven in Israel
-
Attacks usually don't happen if you have your full gear on hand. The Agilite Laptop Carrier gives you the ability to take a hidden emergency system with you wherever you go. The Agilite Laptop Carrier™ was initially designed for Israeli secret security services to blend into civilian environments, but always maintain emergency protection, equipment and a minimalist platform from which to fight. It fits soft or hard armor inserts and can go from laptop bag to plate carrier in seconds, so you can attack a shooter quickly and hands-free. As professionals who carry laptops every day, it was just as important to us that the day-to-day functions were as well thought out as the emergency functions. It fits all common laptop sizes, including 15.6". It also has storage compartments for a computer charger, mouse, headphones, tablets, notebooks, keys and other essentials. It's also designed for rifle and pistol magazines, turnstiles and knives, and more. It has a special Loop CCW area for attaching holsters. The included Gray man cover can be removed in seconds to reveal a loop area for ID patches. If bullets are flying around, it is important that you are recognizable to friendly troops as an aid worker and not as a threat. The Laptop Carrier will not look out of place in a coffee shop, a university campus, a business meeting or with executive security staff. Details- Suitable for all common laptop sizes, including up to 16".
- Storage compartment for computer charger, headphones and more
- Also serves as a 100% concealable plate carrier for emergencies
- Goes from shoulder carrier to plate carrier in seconds
- Fits soft or hard armor plates up to 11"x14"
- Quick access to CCW bag for pistols, magazines, turnstiles and more
- MOLLE loop area for ID patches with removable 'Grey Man,' cover
- Passage for rear luggage handles
- 500D CORDURA® Mil Spec Tactical Nylon.
- Dimensions: 12.9"x17.7"x2.3"
- Weight: 624g
- Main compartment for hard or soft armor plates 11"x14" or smaller
- Special compartment for soft armor plates of 9"x14" or smaller
- Suitable for all common laptop sizes up to 16".
- One size fits all body types
- Main compartment for hard armor and/or Soft Armor plates 11"x14" or smaller
- Special compartment for soft armor plates of 9"x14" or smaller
- Suitable for all common laptop sizes up to 16".
-
The Warfighter™ Cummerbund is the most advanced semi-rigid cummerbund plate carrier on the market. It was designed in collaboration with both Israeli and U.S. Special Forces to solve all comfort and functionality issues with load-bearing cummerbunds. Compatible with any plate carrier with hook and loop surfaces, including the K-Zero Plate Carrier and the K19 Plate Carrier (2.0 and 3.0 versions) with the Cummerbund MOLLE back flap adapter. Most stretch cummerbunds sag under the weight when wearing heavy gear such as radios and sideways armor. The Warfighter Cummerbund is semi-reinforced to support heavy loads, stretches for comfort and maneuverability, but will never sag, even under heavy loads. Allows you to quickly and easily switch between Velcro flaps, quick-release fasteners or FirstSpear Tubes®, on both sides, so you can adjust your cummerbund exactly the way you want it. Equipped with three rows of MOLLE, for maximum mounting possibilities, both internally and externally. Despite this, it retains a lightweight, skeletal design that ensures maximum airflow and keeps you cool under fire. The Warfighter Cummerbund is compatible with the K-Zero Plate Carrier without the need for accessories or modifications. It is also compatible with the K19 Plate Carrier by adding only the modular MOLLE flap on the back. It is compatible with Agilite Flank™ hard sideways armor carriers and all other common sideways armor, radios, pouches and more. Whether you're defending your country on the tip of the spear, defending your community, or defending your home, the Warfighter cummerbund will give you an edge.
*Compatible with K19 Plate Carrier by adding Cummerbund Backflap Adapter.
Specs
Compatible with FirstSpear Tubes® and other quick-release fasteners
Dimensions:
M: 57*14*1cm(22.5*5.5*0.5 inches)
L: 25*5.5*0.5 inches (64*14*1cm)
XL: 28*5.5*0.5 inch(72*14*1cm)
Weight:
M: 126gr
L: 140gr
XL: 152gr
Materials:
- Laser cut Velcro overlay panels
- Laser cut Squadron™ laminate
- 500D CORDURA® Mil Spec Tactical Nylon
- CURV® thermoplastic composite material
-
Sale!Not in stock - on order
The AMAP II is the first assault pack in the Agilite K Series with interchangeable lightweight gear. The AMAP II can function as an independent backpack using a K-series shoulder strap set or directly to the Agilite K5 Plate Carrier. Bad in seconds. This intelligent system is used by the Israeli SF and Infantry and now includes molle sides, an internal zippered compartment, an internal drinking system cover and a support system at the back of the helmet. Details • Compatible with Agilite K Series ™ • Becomes a stand-alone backpack • Dual output gates for cables, antennas and hydration • New modular sides and support bracket • External helmet wearer. • MOLLE upholstery Specs • 14 litres (854,3 cu. In.) Capacity and extra volume helmet carrier • Mil-Spec materials and polymer hardware • Made in Israel -- > Without brackets (ordered separately)This product was replaced by the Agilite AMAP III --> https://shop.afullmetaljacket.com/product/agilite-amap-iii-assault-pack/
-
The Agilite Micro MAP is a rear attack panel that attaches to any plate carrier and gives it a compact, extremely versatile, extra layer of storage and capabilities without extra bulk. It has been developed for units that carry out short missions, often in small spaces, and that require a high level of performance and diverse capabilities in an exceptionally compact package. Attaches to ANY plate carrier with MOLLE on the back and does not require its own zippers or other mounting systems (including the Agilite K-Zero and K19 plate carriers). Unlike other back panels that can only hold 1.5 liters of water, the Micro MAP can carry a full 3 liter hydration layer. Optimized for the Agilite 3 Liter SAPI Hydration Bladder - the first tactical hydration bladder designed specifically for SAPI Plate Carriers. The unique shape of the bladder maximizes the space available for carrying 3 liters of water, while still keeping the bladder in a low profile and non-intrusive. The Micro MAP features a stowable beavertail that expands the carrying capacity and can accommodate a wide range of additional gear, including helmets, clothing, and more. The beavertail has a fold-down flap for additional tools, such as a bolt cutter, rifle, and other items. Includes a full pass-through function for even longer items. Two built-in administration pockets for convenient storage of smaller items. Integrated cable management channels for organizing all your cables, without snagging. Whether you're on a mission or responding to a threat, the Micro MAP ensures that your entire gear and support system is at your fingertips. Sizing The Micro MAP fits ANY Plate Carrier with MOLLE on the back. Specs- 500D & 1000D CORDURA® Mil Spec Tactical Nylon
- Mil Spec tyres
- YKK Zippers
- Main compartment volume - 3 liters
- Max. volume beavertail - 8 liters
- Weight: 0.6 kg
- Dimensions: 35cm*28cm (13.7" x 11")
-
The Agilite Modular Assault Pack III or "AMAP III" is the most versatile and universal military attack package on the market. Designed, battle-tested and proven in Israel and behind enemy lines with the IDF's most elite units. It has plenty of unique features and capabilities that no other attack package has. Decades of experience in Israeli combat has taught us that it is necessary to be able to carry a decent load on a platform that is not cumbersome, cannot move and that maintains a low profile during CQB, Rotary and Vehicle-based operations. The AMAP3 is an Assault/EDC Crossover pack that ranges from super low-profile for short raids (4 liters), to carrying significant payloads for longer missions or mid-mission changes (18 liters +8 liter Beavertail). We've all been in short raids that turned into multiple day operations without warning. The ability to carry extra gear comfortably and directly without bulky additional backpacks is critical. The AMAP III takes versatility and universality to a new level. It works with plate carriers, helmets, molle bags, Velcro bags, hydration radios and antennas, laptops, harnesses, sleeping bags, sniper mats. It attaches directly to Agilite plate carriers and other plate carriers (via conversion kit). It functions as an independent attack package, as well as a crossover EDC package. It's just as comfortable on the battlefield as it is for weekend trips. Thanks to the new clamshell opening and military-grade full loop interior, you can add countless Velcro bags, in any configuration that best suits your MOS or EDC needs, and can change constantly and indefinitely as your missions do. Additional features include a newly reworked beaver tail design that allows you to wear helmets, clothing, and other items. Multi-directional mounting options for sniper mats and additional equipment. Communication, hydration and antenna output ports and storage options, CCW trekking capability, three-density fusion foam comfort padding, detachable shoulder straps, and reinforced laser-cut molle and placard mounting capabilities. It also has secure admin space for small, easy-to-lose items. Part of the secret to the excessive comfort and versatility of the AMAP III is that this system has been refined and perfected through constant feedback from intense, daily real-world Israeli missions over so many years. The 3rd generation of AMAP, every feature in this package is based on accumulated experience, there are no shortcuts. The AMAP3 has an optional EDC insert kit that consists of a smartly lined laptop sleeve and an administrator dashboard. This allows you to run your AMAP III downrange and switch to a completely different configuration within seconds when you go on leave or for weekend trips. The AMAP III works as a premium attack package with fusion foam shoulder straps now standard, but in addition, it is the first Agilite Assault package that can be attached not only directly to Agilite plate carriers, but also to any plate carrier with Molle through a mounting kit. No MOLLE or other timely and clumsy fastening methods are needed. By attaching your AMAP III to your plate carrier, your entire gear and survival system is removed in an instant. whether you need to catch the HELO or when facing a villain, you have everything in one grip, reducing your reaction time. It also means that in a firefight, you don't have shoulder pads on shoulder pads, all of which move independently and unnecessarily accumulate and weld your shoulders. The AMAP III is lightweight yet built with the best mil-spec materials. It was built to survive more than a decade of non-stop use in extremely aggressive military environments. It has traveled many miles and crossed borders to some of the world's most dangerous places, to bring you the most intelligent and versatile attack pack on earth. Details:- Most versatile and universal attack package on the market
- Crossover EDC package for extra daily use
- Designed, tested and proven in battle in Israel
- Can be used with shoulder straps or attached directly to the Agilite K19 Plate Carrier and K5 Plate Carrier.
- Compatible with Swift Clip poster and chest rigs to add extra carrying capacity.
- Advanced new patented beaver tail design for wearing helmets, clothing and other equipment.
- Goes from flat and low profile (4 liters) to fully expanded (14 liters) capacity in seconds, with an additional 8 liter beaver tail space and other external carrying capabilities.
- Beavertail becomes extra administration compartment
- Detachable shoulder straps
- Attaches directly to non-Agilite plate trays using the AMAP III conversion kit (sold separately)
- Side and bottom extra carrying capacity for securely attaching clothes, sleeping bags, sniper mats etc.
- Low profile design for use in CQB, Rotary or vehicle-based operations
- Administration pocket with zipper for smaller items.
- Triple Layer Fusion Foam padding and rear airflow duct for extreme comfort
- Designated hydration compartment
- Optional EDC insert set for laptops and other EDC items.
- Full clamshell opening and full Velcro® interior to attach hook bags
- Built-in ports for hydration and communication tubes and cables
- Left and right output ports for radio antennas and longer items
- Compatible with Agilite K-Series™
- 500D CORDURA® brand Mil Spec. Nylon
- Mil Spec polymer buckles and hardware
- YKK Zips
- Velcro® Fire mounting platform
- Minus. volume 4 liters, max. volume 18 liters + additional 8 liter Beavertail compartment
- Laser cut Velcro MOLLE overlay panels
- Dimensions back panel with Velcro: 25cm*9cm (9.8" x 3.5")
- Triple Density Fusion Foam shoulder and back comfort pad
- Weight: 2.13 lbs (0.96 kg)
- Height: 15.7" (40cm)
- Width: 11" (28cm)
- Depth: 7.8" (20cm)