- Minimalistic, low profile and lightweight admin pouch
- Horizontally oriented laser cut MOLLE loop platform
- Main compartment with zipper and shock cord for adjustable opening factor up to 180 degrees
- Drawstring with heat shrink tubing and a paracord loop trigger holder
- 2 small and 1 large mud bag on the back panel with elastic bands
- Adjustable bungee cord on front panel for phone or other accessories
- Extra slip bag behind front panel
- Flex-HT™ 1/2" webbing ladder for more weaving possibilities
- Flex-HT™ 3/4" TPU coated strap for flexibility on all weaving platforms
- Pull tab for quick detachment of Flex-HT™ straps
- Flex Hook Adaptors convert the bag to a hook/loop attachment (2 included)
- Double layer water resistant 500D Nyl
-
With the smart features of the 5.11 Tactical Flex Admin Pouch, you can store your tools organized and safely. In addition, it can be attached to all platforms with the Flex-HT™ Mounting System's 1/2" webbing ladder and 3/4" TPU coated straps. Dimensions 11.4 x 15.8 x 2.5 cm Attributes -
If you're traveling light, it pays to have all your essentials in one place and the handy Responsepak WGTE has a place for just about everything. With multiple interior and exterior pockets, including the main compartment and two side pockets, you can store everything from cameras to first aid kits. You can easily fit all your essentials in it, and you'll always be ready when you are. The Responsepak WGTE can be used as a 'quick grab' bag with the heavy-duty handle on the top, or it can be worn as a waist bag via the 46-inch waist belt. CHARACTERIZE:- Robust and water-resistant
- Multiple compartments
- Carry handle
- Maximum strap adjustment: 116 cm
- Soft belt loops
- Zipper pulls easily accessible with gloves
- Dimensions: 36 x 16 x 14 cm
- Main compartment: 22 x 10 x 14 cm
- Front pocket: 16 x 6 x 12 cm
- Side pockets: 7 x 5 x 14 cm
- Colors: Black (BK), Olive Green (OG), Coyote Tan (CT)
- Made of 100% 600D nylon
- Weight: 400 g
-
The updated Condor Gen III Draw Down Waist Pack features a slimmer design and more storage capacity in a more streamlined profile. Perfect as a standalone fanny pack or seamlessly attached under compatible plate carriers. Thanks to its narrower width, the Draw Down sits perfectly under standard plates without restricting freedom of movement during dynamic situations. This covert support pack offers space for everyday essentials or tactical items. The loop-lined main compartment accommodates leashed accessories such as holsters, mag pouches and admin organizers. With its discreet weapon portability, the updated Draw Down is the perfect partner for your adventures at the shooting range and in the city.- Redesigned to optimize capacity while maintaining a compact size
- Wider zipper opening for easier access
- Interchangeable strap system
- Can be used as a fanny pack or attached to a plate carrier
- Loop-lined interior for hooked accessories
- Zippered back pocket for valuables
- Volume: 2.5L // 152.5 cu in
- Size: 7"H x 10"W x 2.5"D
- Size: 17.78 cm×25.4 cm×6.35 cm
- Imported
-
On the modern battlefield, communication is key, just as important as your firepower or ballistic protection. The Skeletonized Comms Wings Set is a set of two plate carrier side wings that can accommodate most individual radios, including AN/PRC-148 or AN/PRC-152. Each wing is adjustable in height for different radio configurations (with or without battery etc.). More so – the wings also accommodate 2 AR-style magazines. The laser-cut holes on the front have been carefully designed to work with the side buckles of the Front Flap Rig Interface.- RAW MATERIAL: Cordura® 500D and Nylon 210D laminate
- Size: one-size-fits-all
- WEIGHT [LB]: 0.18
- WEIGHT [G]: 80
- DIMENSIONS [IN] : reed 8.85'', height 6.5'' (dimensions single piece)
- DIMENSIONS [CM]: width 22.5cm, height 16.5cm (dimensions per piece)
- SKU: PO-SKCW-CD5
-
Not in stock - on order
Designed for extendable batswoman poles, the Baton Holder Model 35 has three different sizes for 16-inch, 21-inch and 26-inch sticks. Thanks to a hole on the back of the device, the user can put the baton back into the holster, even if it is fully extended. The 35 is also available with a tactical version that can be mounted on two hole attachment points. Features- Designed for extendable baton
- Extended baton can be re-holed
- Fits 26" (66 cm) length batons
- Part of the 6004/6005 tactical system
- No call loop
- stx tactical
- MODEL: 35
- SKU: 1099198
- PART: 35-F26-23
-
The size is easily changed with the elastic cord. Low profile to make it easier to work in an open hatch or in a car. The elastic cord with heat shrink closure at the top is quick and easy to open Low cut for faster removal of the magazine. 25 mm MOLLE straps on the outside so you can attach other magazine bags to the outside. Two or more warehouse bags can be attached outside each other. Eyelet in the soil to let water through. The Tuck in attachment system makes it possible to attach the pouch to any vest or belt. The mounting system is easy to use on standard 25 mm MOLLE/PALS system. Storage compartments: 1 x 7.62 or 1 x 5.56 magazine or radio, pistol etc. Weight:95 g Dimensions: 8 x 11 x 3 cm -
The Model 38 OC/Mace Holder gives quick and easy access to a spray in the blink of an eye, but with the protection provided by a closure at the top. This holder is made of durable SafariLaminate material and is designed for the 6004/6005 tactical system. -
Not in stock - on order
The Model 38 OC/Mace Holder gives quick and easy access to a spray in the blink of an eye, but with the protection provided by a closure at the top. This holder is made of durable SafariLaminate material and is designed for the 6004/6005 tactical system. -
A lightweight general purpose pouch with a wide opening top zipper. It opens on 3 sides for an easy access to the contents of the pouch. The zipper is semi stiffened to be easier to open and close. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can also be attached horizontally with the Velcro attachment bands. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits inside: Your night vision device, binocular, gloves or all the other small things you need to carry. Measurements: L= 19, W= 12 & D= 8. Weight: 105 g. Volume: 1,8L Note: The grey pouch does not have any MOLLE bands on the outside. -
Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. The two vertical fastening straps leave an approx. 9 cm wide gap, so you can carry items such as axes, fishing sticks, etc. behind the pouch. Optimal attachment requires a width of four channels and a height of six (min. five) rows of PALS webbing. The compression straps on the side of the backpack, when put on, will prevent any movement of the backpack and its contents. The 6-litre side bag fits all our Jääkäri backpacks. For backpacks with less than six rows of PALS webbing on the sides, the bottom of the bag "hangs". You can have this absorbed by the compression straps on the sides, or you can choose to attach the pouch one step higher to the side of the backpack. Examples of use With a capacity of six liters, this is a medium-sized bag, not small, not large. Something you would expect with a backpack of 30-80 liters. Here are some examples of what will fit in such a bag:- A large tarp and accessories
- A hammock and duvet
- A lightweight puff jacket and pants or rain gear
- Two regular 1.5 litre drink bottles
- A Trangia 27 Series stove, fuel and some stuff to cook
- A Jetboil stove, a gas cartridge, water and some stuff to cook
- 24 hour rations and snacks
- Capacity approx. 6 litres
- Covered zipper
- Front vertical loops for compression straps
- Internal D-ring for attaching small items
- Internal flat rear compartment
- Reinforced bottom and sides
- PALS-compatible mounting system
- Water drainage opening at the bottom
- 5-year material and manufacturer's warranty
- Made in Finland/Estonia
- Weight: 240 g
- Dimensions: 17 x 35 x 9 cm (W x L x D)
- Main material: 500D Cordura (100% polyamide)
- Lining: 210D polyamide
- Webbing: 100% polyester
-
Not in stock - on order
A sturdy pouch for a 1 liter bottle or for general purposes. The lid opens outwards for quick and secure access. Double zipper pullers. Drain hole at the bottom. Folding closure fastening system makes it possible to attach the pouch vertically or horizontally to any modern vest or belt. Front covered with MOLLE. Bottle not included. Dimensions: H=23, W=12 & D=9 cm. Weight: 100 g. -
Not in stock - on order
Designed for extendable batswoman poles, the Baton Holder Model 35 has three different sizes for 16-inch, 21-inch and 26-inch sticks. Thanks to a hole on the back of the device, the user can put the baton back into the holster, even if it is fully extended. The 35 is also available with a tactical version that can be mounted on two hole attachment points. Features- Designed for extendable baton
- Extended baton can be re-holed
- Fits 21" (53 cm) length batons
- Part of the 6004/6005 tactical system
- ELS 34/35 Combo
- stx tactical
- MODEL: 35
- SKU: 1155790
- PART: 35-F21-23-MS36
-
Our Rapid Waist Pack is versatile and fast. This backpack is ideal for grabbing essential and critical equipment when time is of the essence. The backpack can also be attached to our other Rapid Packs and other MOLLE platforms by simply removing the back panel and exposing the SlickStick® system. The main zipper is located on the front and another zipper on the inside provides a mesh pocket. An internal loop panel makes it possible to wear accessories hidden or attach them with Velcro. Imported. Details- Dimensions: 16.5 x 24.7 x 7.6 cm
- 183 cubic inches / 3-liter total capacity
- Detachable fastener belt to wear at the waist or crosswise
- External front pocket with zipper
- Removable back panel reveals 5.11 SlickStick® and MOLLE web gear compatible
- Attachable to Rapid Packs and Rapid Sling Pack or other MOLLE web platforms
- Internal loop panel for CCW carry
- Internal mesh pockets with zipper and elastic bands
- 270° opening with double zippers
- Front panel with web MOLLE and 6x1 name band
-
Soft polymer magazine holder with MOLLE attachment for a 5.56 magazine. Can be attached to a belt or to the MOLLE loops on a patrol vest or combat bag. The holder can be attached both up and down. Compatible with FAMAS, HK416 and AR15 magazines. -
A larger counterweight bag for Finnish Senop lead weights and 10 x 10 cm identification plates. Designed to work with the usual Ops Core FAST XP high cut helmet and our High cut helmet cover V1. KEY FEATURES- Internal elastic compartments for lead weights
- Designed for six weight discs of 45 x 60 x 5 mm
- Can also carry weights of other shapes and sizes
- Attaches to helmet rail with screws and loop
- Upper fastening straps for our High cut helmet cover V1
- External elastic loops for cord management etc.
- Also functions as a holder for spectacle straps
- 10 x 12 cm loop on the outside for patches
- All color options offer good NIR performance (read more)
- 5-year material and product warranty
- Gemaakt in Finland
- Weight: 60 g
- Fabric: 500D Cordura (100% polyamide)
- Webbing: 100% polyester
- Buckles: steel
-
Not in stock - on order
The Med Pouch Gear Set™ seamlessly connects to 5.11® bags, packs and duffels, providing a fast and efficient first aid solution for any application or environment. Features- Part of Gear Set™ system that can be placed on any Gear Set™ compatible product
- 3-layer fold-out configuration for organization
- Fold-out top flap with elastic and zipped pocket on the back
- Transparent vinyl bag with elastic for two-sided access
- Large clear vinyl main pocket with zipper
- Loop strip for nameband
- Velcro flap and two main opening zippers
- Reflection
- G-hooks, split S/R buckles and hook supports for compatibility with Gear Set™ products
- Included on ALS/BLS duffel
-
With the Agilite Molle Placard you can easily expand your plate carrier with molle rows. The back of the placard consists of velcro and 2 G-hooks. -
VERTICAL POUCH L
6 l multifunctional zippered bag. PALS-compatible attachment, designed for use with backpacks. TECHNICAL SPECIFICATIONS:- External dimensions: height 30 cm, width 17 cm, depth 12 cm.
- Capacity bag closed: 6 liters.
- Materials: 1000D Cordura (M05: Foxdura) PUR coating.
- PALS attachment: height 3, width 4, two attachments 28 cm
- Weight: 165 grams
-
The perfect little bag to put your empty magazines in during a firefight. Also good for storing gloves, hearing protectors, etc. Use it to preserve evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things you don't want in your hands. Rolled up in the bottom of the vest. Pull the square ring down, naturally, when you want to open the pouch. Zipper closed top. The flap can be opened on the inside of the pouch. Accommodates 4 magazines. Attributes Weight: 160 g Dimensions:24 × 16 × 9 cm Color: Grey -
Back-worn/vest-loaded modes: Quick release shoulder straps that can be used to attach the system to MOLLE straps on your vest. The Low profile drinking backpack, specially designed for ballistic vest integration. Maximum use of our low-profile technology reduces the depth of the wearer, making it a truly unobtrusive drinking system. External filling port - Quick and easy refilling without spilling. MOLLE strap on the outside. NOTE: Only the cover is included with the product, not the bladder, hose or mouthpiece. Weight: 50 grams Dimensions: 35 × 28 × 1 cm CategorySource®: hydration Color: Black, Grey -
The Warrior Assault System Personal Medic Rip Off Pouch to store the first aid kit, the pouch can be separated from a platform by means of Velcro and Velcro straps, the platform stays on the vest /chest harness, wide opening 2-way zipper, inside elastic loops to attach the first aid kit. Dimensions: approx. 13.5 x 7.5 x 20 cm (LxWxH), weight approx. 325 g. The WAS equipment bags are equipped with a Molle fastening system, i.e.dat the bags can be attached very flexibly to vests, chest harness, backpacks and belts. Made of water repellent 1000D Cordura, all webbing according to US Mil Spec, the materials used have the lowest infrared values (99.8%) and are manufactured to military specifications. The filling material (Medic equipment) is not included. -
Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. The two vertical fastening straps leave an approx. 9 cm wide gap, so you can carry items such as axes, fishing sticks, etc. behind the pouch. Optimal attachment requires a width of four channels and a height of six (min. five) rows of PALS webbing. The compression straps on the side of the backpack, when put on, will prevent any movement of the backpack and its contents. The 6-litre side bag fits all our Jääkäri backpacks. For backpacks with less than six rows of PALS webbing on the sides, the bottom of the bag "hangs". You can have this absorbed by the compression straps on the sides, or you can choose to attach the pouch one step higher to the side of the backpack. Examples of use With an eight-liter capacity, this is clearly a larger side bag, which is perhaps best used on large and high backpacks of 60-100+ liters. Here are some examples of what will fit in such a bag:- A large tarp, hammock and accessories
- A hammock and duvet
- A lightweight puff jacket and pants or rain gear
- A Trangia 27 series stove, fuel, water and lots of stuff to cook
- A Jetboil cooker, a gas cartridge, water and lots of cooking utensils
- More than 24 hours of rations and snacks
- Almost a week's worth of spare underwear, interlayers and socks.
- Capacity approx. 8 litres
- Covered zipper
- Front vertical loops for compression straps
- Internal D-ring for attaching small items
- Internal flat rear compartment
- Reinforced bottom and sides
- PALS-compatible mounting system
- Water drainage opening at the bottom
- 5-year material and manufacturer's warranty
- Made in Finland/Estonia
- Weight: 270 g
- Dimensions: 17 x 40 x 11 cm (W x L x D)
- Main material: 500D Cordura (100% polyamide)
- Lining: 210D polyamide
- Webbing: 100% polyester
-
Not in stock - on order
The Agilite EDC Organizer panel can be configured for numerous different equipment setups. The multi-functional storage areas work with everything from rifle ammunition, pistol ammunition and turnstiles, to laptop chargers, headphones, mouse and cables. It has two zipper pockets to store valuable or smaller items and compartments for pens, multitools, flashlights, survival gear, documents and electronics, and a mil-spec metal keychain. Details- The organizer panel provides the AMAP III user with a variety of storage options of different sizes, including elastic open pockets for magazines, mobile phones and other devices
- Storage compartment for turnstiles, pens, multitools, flashlights, documents, rifle and pistol magazines
- Large zipper pocket for laptop or phone chargers
- Second zipped pocket for storing small, easy-to-lose items
- Metal keychain
- 500/1000 Denier CORDURA® Mil Spec Tactical Nylon
- Laser cut fabrics & loop
- Mil Spec Polymer & Metal Hardware
- Agilite polymer grip-puller
-
Be ready for anything with the 5.11 Tactical Skyweight Chest Pack. Weighing less than a kilo, this 2-litre bag keeps essential gear within reach. The main compartment is easily accessible thanks to the side gusset opening. The front has a MOLLE loop for attaching additional pockets. The quick-release harness system is adjustable and versatile. When the bag is removed, it can be used alone or as a fanny pack. Pull tabs provide quick access to the ambidextrous CCW pocket, designed for compact pistols. An internal hook-and-loop panel provides an attachment platform, while elastic straps are available to secure items. The breathable back panel keeps you comfortable, and the padded grommet is compatible with standard straps, RUSH® 100 backpack hip belts, or the Skyweight hip belt (sold separately). Gear loops, 1x1 side buckles and lower belt loops allow for maximum carrying options. No matter what you need to do, you can rely on the Skyweight Survival Chest Pack. Features- Breast pocket
- Lightweight, adjustable quick-release harness system
- Detachable harness for stand-alone or beltpack configuration
- Ambidextrous CCW compartment with internal hook-and-loop panel
- Elastic straps to secure magazines
- Pull tabs for quick access to CCW compartment
- Suitable for compact pistols
- Breathable chest panel at the back
- Padded rear pass-through compatible with Skyweight lap belt, RUSH® 100 back belt or other standard belt (sold separately)
- External MOLLE panel on the front in laser-cut laminate for attaching a pouch
- Bottom strap loops
- Loops for equipment
- 1x1 buckle
- 330D ripstop nylon
- Suitable for breasts from 86 to 127 cm
- Dimensions: 15.2 x 25.4 x 6.3 cm
- Weight: 0.45 kg
- Capacity: 2 litres
-
Not in stock - on order
The new Velcro insert panel with much improved ways to be used. This panel makes it possible to attach the insert pockets in the Specialist backpack. Two sizes, one for the 30L and one for the 40L Specialist backpack. Attaches to the Specialist backpack with press studs Surface covered with Velcro loops Holes are punched into the panel, and the elastic cord that comes with the panels can be threaded through the holes to secure the equipment. Attach only one long side and reach the pockets under the panel Fits in: Anything – medical equipment, technical equipment, or personal items Beware: In the Specialist backpack Weight: 80 g Dimensions: 43 × 28 × 1 cm Contents and backpack not included. Just for illustrative purposes. -
The Agilite Pincer Pistol Pouch is a MOLLE backpack for a quick-to-pull, low-profile elastic pistol magazine for a single double-stacked 9mm pistol magazine (and other similarly sized items). The magwell's patented funnel-shaped design allows you to grab or re-index a magazine with one hand.- Open-top pistol bags are popular, but have inherent flaws. They are often clumsy, clumsy, noisy or impossible to re-index a warehouse with one hand.
- The Pincer Pouch is lightweight, has a low profile, is quiet and you can put a magazine in it without hitches.
- The Pincer pistol pouch is incredibly versatile, with double-cut laser-cut rear MOLLE to fit perfectly on all combat belts and plate carriers.
- Includes height-adjustable flap to secure smaller items like multi-tools, flashlights and more.
- Laser cut Velcro overlapping panels
- Laser cut Squadron™ laminate
- 500D CORDURA® Mil Spec Tactical Nylon
-
A medium-sized pouch for general use. KEY FEATURES- Designed for general use
- Two-way zipper
- Internal divider and loops for organization
- PALS weaving tapes on the outside
- Drainage feed-through at the bottom
- PALS-compatible mounting system
- 5-year material and product warranty
- Made in Finland/Estonia
-
- Low-profile general-purpose pouch to store and organize essential items without sagging or flapping
- MOLLE mount on the back (3 MOLLE slots on the front and 3 MOLLE slots on the bottom)
- Pass-through for attachment to all straps
- Built-in shock cord gives you the ability to tie items internally without wobbling or sagging.
- Shock cord also serves as an attachment point for a Tourniquet
- Built-in internal organization, including a loop for attaching velcro inserts.
- Proven in battle in Israel
- Fits in one size
- Can be attached to any MOLLE surface: Occupies 3 MOLLE slots at the bottom and across
- 500D CORDURA® Mil Spec Tactical Nylon
- Milspec WebbingYKK Zippers
- Drainage hole
-
Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. The two vertical fastening straps leave an approx. 9 cm wide gap, so you can carry items such as axes, fishing sticks, etc. behind the pouch. Optimal attachment requires a width of four channels and a height of six (min. five) rows of PALS webbing. The compression straps on the side of the backpack, when put on, will prevent any movement of the backpack and its contents. Of our own packs, we recommend the 12L side bag only for the Jääkäri XL. While this is not recommended, you can also make the bag suitable for smaller bags with an absolute minimum of six rows of PALS webbing on the sides, by attaching the bag a step higher and accepting that the bottom becomes a little limp. Examples of use With a capacity of twelve liters, this is a very large side bag, the PALS attachment is five channels wide. Best used on large and high backpacks of 70-100+ liters. Here are some examples of what will fit in such a bag:- A tarp, hammock, duvet and accessories.
- A lightweight puff coat, pants and rainwear
- A Trangia 27 series stove, fuel, water and lots of stuff to cook.
- A Jetboil cooker, a few gas cartridges, water and lots of cooking utensils.
- A few days of rations and snacks
- A week of spare underwear, intermediate layers and socks.
- All kinds of big special stuff that you need to take with you.
- Capacity approx. 12 litres
- Covered zipper
- Front vertical loops for compression straps
- Internal D-ring for attaching small items
- Internal flat rear compartment
- Reinforced bottom and sides
- PALS-compatible mounting system
- Water drainage opening at the bottom
- 5-year material and manufacturer's warranty
- Made in Finland/Estonia
- Weight: 320 g
- Dimensions: 21 x 45 x 12 cm (W x L x D)
- Main material: 500D Cordura (100% polyamide)
- Lining: 210D polyamide
- Webbing: 100% polyester
-
Weight: 100 g Dimensions: L= 25, W= 7 & D= 7 cm Fits in: Large spary cans Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for your large spay canister that keeps it secure, which is easy to use and attach on the equipment belt-
The pouch is securely attached to the belt or vest
-
elcro closed flap.
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
The FAB Defense Scorpus PG-9 double magazine bag, with its slim and compact design, provides a perfect fit for double-row Glock magazines. It features an innovative 8-step manually adjustable tensile resistance. This innovative system is specially designed for fast pulling and safe carrying. Details:- Provides excellent protection for warehouses
- Slim and compact design.
- Innovative, manually adjustable tensile resistance in 8 steps.
- Pressure tab for tight and secure fit.
- Paddle with 35-degree angle adjustment.
- Durable glass fiber reinforced polymer composite construction.
- Includes belt clip and paddle.
- Suitable for 9mm and .40 GLOCK 17/19/22/23/25/26/27/31/32/33/34/35/37/38/39 magazines.
- Weight: about 121 g.
-
The perfect little bag to dump your empty magazines into during a firefight. Also useful for storing gloves, hearing protection, etc. Use it to store evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things that you don't want in your hands. You wear it rolled up in the bottom of the equipment vest. Pull the square D-ring if you want to open the pouch. Zipper at the top. Accommodates 4 warehouses. Attributes- Article number: 22-00301-56-000
- Weight:160 g
- Dimensions: 24 × 16 × 9 cm
-
The Condor Tactical Response Bag is a great way to get organized for any emergency. With a large amount of pre-divided compartments, you can quickly store your essentials. The bag comes with a hidden all-purpose pistol holster in a hidden pocket with Velcro.- Main compartment with removable divider
- Two adjustable side pockets
- Two pen compartments
- A tactical pocket for flashlight
- Four accessory pockets with hook-and-loop closure
- Two zippered compartments
- Detachable padded shoulder strap
- Concealed carrying pocket
- Volume: 494 Cu In // 8 L
- Overall size: 9.5"H x 13"W x 4"D
- Overall size: 4.13 cm x 33.02 cm x 10.16 cm.
- Imported
-
Not in stock - on order
The perfect pouch to quickly put your empty magazines in during a firefight. Also useful for storing gloves, hearing protection, etc. Use it to put evidence or other important things in during a raid Basically, the pouch is designed to temporarily carry things you don't want in your hands Is worn rolled up in the bottom of the vest Pull the large D-ring when needed The drawstring with drawstring closure at the top can be tightened to tighten the opening of the pouch Capacity: 10L Suitable for: 8-10 x 5.56 magazines, earmuffs, gloves etc. Beware: Equipment vest, belt etc. -
Features:The bag for shotgun ammunition-
Carried on your leg for easy access to a bag full of shotgun cartriges
-
Elastic mesh top for easy access and semi secure storage
-
Flap opens up out so it won´t block the access to the ammunition
-
Flap with velcro closure to really secure the contents of the bag
-
Velcro attachment system makes it possible to attach the holder on any equipment vest, leg atatchment or belt.
-
-
The patent-pending Warrior's Medic Rip Off Pouch fits a wide variety of medical equipment. Elastic compartments and tabs organize the kit in order of use. Space for 2 x C.A.Ts 2 x compression bandages 2 x Quick Clot Combat Gauze Bolin Chest Seal Airway Scissors The pouch is held firmly in place by Velcro and supported by webbing. Pull back the Velcro and use the pouch in the traditional shape or pull the pouch to tear the pouch off the panel. Thus, it can be immediately passed on to another user or injured person, and the owner can continue with the mission or go to the target. The Medic Rip Off pouch takes up 4 rows of MOLLE on any compatible chest strap or bag. *Content not included, for illustrative purposes only. -
High speed is lifesaving when a team member goes down. Our 5.11 Tactical Flex TacMed Pouch brings resistance back into your first aid action with a quick-to-pull, drop-down opening at the front where bungee cords, pockets and elastics keep life-saving supplies in front and ready to go. However, rapid deployment is just the beginning. An additional compartment at the back, with a bungee retention belt, can store a few AR magazines or other equipment. The N500D construction means that the Flex TACMED Pouch can survive years of abuse, while our FLEX-HT™️ Fastening System keeps everything in place. The laser-cut MOLLE platform on the front is ideal for accessories and patches and the lower elastic band is perfect for a turnstile. Dimensions 8"H x 7.0"L x 2.0"D Weight 0.27kg Attributes- Carrying TacMed supplies and double AR magazines
- FLEX-HT™️ Mounting System
- Front laser cut platform for accessories or patches
- Quick pull drop front opening for access
- Bungee compression fastening system
- Elastic bands and organization pockets
- Magazines compartment with compression belt
- Elastic band and drain holes on bottom panel
- 500D Nylon |500D
-
Attaches quickly and easily to the front of the Agilite Pincer™ Placard, giving it a whole new level of organization, storage and capabilities in one compact package.- Features a low profile with easily accessible administration pocket with both internal organization and a loop area for attaching velcro inserts.
- Double side panels with laser-cut MOLLE, perfect for attaching Pincer™ Pistol Mag pouches or other single-column pouches of your choice.
- 2 internal elastic loops on the back, ideal for storing chemlights, trauma scissors, markers, pens and more.
- 500D CORDURA® Mil Spec Tactical Nylon
- Laser cut Squadron™ laminate
- Laser cut Velcro overlapping panels
-
Weight: 50 g Dimensions: L= 14, W= 11 & D= 4 Fits in: Handcuffs Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for two handcuffs, that keeps them silent and secure, which is easy to use and attach on the equipment belt-
The pouch is securely attached to the belt or vest
-
Fits normal and large handcuffs
-
Press button closure with Velcro patch
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch is fully padded to reduce the rattling of the handcuffs and to make the pouch as strong as possible
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
MG AMMUNITION BAG -09 Fits in it: 200 x 5.56 mm or 200 x 7.62 mm or 200 cassette Beware: In your hand, over your shoulder or on the equipment vest functions:- The perfect case to carry ammunition for the SAW/Minimi machine gun
- For 200 rounds coupled 5.56 ammunition free of charge or in a cassette
- Also suitable for 7.62 coupled ammunition
- Can be used for 2 Cal 50 warehouses
- Webbing on both sides for attaching small bags
- The pouch can be attached to the vest or worn in a shoulder strap (not included)
- Article number: 22-00511-09-000
- EAN: 7332673301539
- Weight: 300 grams
- Dimensions: 18 x 19 x 8 cm
- Category: Holders & bags
- Color: Grey
-
A lightweight bag for your large handcuffs, which keeps them quiet and secure, easy to use and attaches to the equipment belt. The pouch is securely attached to the belt or vest Suitable for normal and large handcuffs Snap fastener with Velcro The Velcro closure makes it possible to close the pouch quickly and easily. The pouch is fully padded to reduce the rattling of the handcuffs and make the pouch as strong as possible The pouch does not absorb water, does not rot and does not soften in the rain The foldable fastening system makes it possible to attach the pouch to any vest or belt. The pouch can be attached to the belt without removing what is already on the belt. Open the fastening straps on the back of the case. Place the pouch on the outer belt. Thread the fastening strap under the horizontal strap on the pouch and close the fastening straps. Fits in: Handcuffs Beware: Service belt, Leg Platform, Equipment Vest and on the belt Weight: 60 g Dimensions: 11 x 11 x 4 cm -
The Agilite AG3 Placard is a bungee retention placard that allows you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way.- Suitable for three 5.56 magazines and can be attached to any plate holder with G-hooks or Placard buckles (both buckles and G-hooks included with the placard).
- Bungee retention warehouse bags have been used for more than a decade because they hold warehouses well, but they have an inherent, annoying flaw. They make removing or returning a warehouse inconvenient, with two hands and two movements, because the warehouse keeps hooking on the bungee tabs.
- AG pouches solve this age-old problem and go from HALO jump-level retention to safety off, mag draw, may re-index and back without ever taking your dominant hand off your weapon.
- The custom-polymer pull tabs also allow both mechanical and friction grip to get the perfect grip, with or without gloves.
- Whether you're defending your country at the tip of the spear or defending your family, AG pouches give you a head start.
- Fits three 5.56x45 AR or M4 rifle magazines.
- The AG3 Placard fits ANY plate carrier and is equipped with both G-hooks and MOLLE buckles.
- 500D CORDURA® Mil Spec Tactical Nylon |
- Laser cut Velcro MOLLE overlay
- Suitable for three 5.56 warehouses
- Height adjustable
- Weight: 0.16 kg
- Including mil-spec G-hooks
- Including mil-spec Polymer MOLLE Placard buckles
- Suitable for three 5.56 warehouses
- Makes it easy to pull or place a magazine with one hand
- Proprietary polymer pull tab for exceptional grip
- Reliable retention to never lose a warehouse
- With hook closure, to be attached to any plate carrier that Placard is capable.
- Proven in battle in Israel
- Smart retention lip meets military requirements without obstructing access to the bag
-
Agilite AG Mag Pouches are bungee retention pouches that allow you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way. Bungee retention may pouches have been in use for over a decade because of how well they hold warehouses. but they have an inherent, annoying flaw. They make the removal or return of a mag a clumsy, two-convenient, two-motion process because the magazine sticks to the bungeelusjes. This is especially problematic with "tac reloads". AG pouches solve this age-old problem and go from HALO jump-level retention to safety, magazine pulling, magazine re-indexing and back without ever taking your dominant hand off your weapon. We don't believe in taking both hands off your weapon during a firefight, because we come from an environment where time outside the target and outside the weapon when the bullets fly around can easily cost you your life. Sometimes you can't miss that time to intervene again, because by grabbing you have to look down or take your second hand off your weapon. AG pouches use a combination of specially developed polymer pull tabs and various reinforced materials that work together to provide the retention level of closed-top pouches, but the fast pulling ability, without hooks, of open-top pouches. Your equipment should allow you to focus on the threat – it shouldn't bother or annoy you. The custom-made polymer pull tabs allow for both mechanical and friction grip for a perfect grip, with or without gloves. We don't believe in normal just because we've always done something a certain way doesn't mean we can't rethink it and evolve it to provide small but crucial benefits that improve your performance, comfort and safety. Whether you're defending your country on the tip of the spear or defending your family, AG pouches give you a head start. Details- Suitable for three 5.56 warehouses
- Makes it possible to easily pull and insert the magazine with one hand
- A patented polymer pull tab for exceptional grip
- Reliable retention to never lose a warehouse
- Built-in MOLLE rear mounting
- Tested in battle in Israel
- Smart retention tab meets military requirements without obstructing the entrance to the pouch
- 500D CORDURA® Mil Spec Tactical Nylon
- Laser cut Velcro MOLLE overlay
- Takes 3 MOLLE slots down and 6 MOLLE slots transversely
- Weight: 0.35lbs (0.16kg)
- Suitable for three 5.56x45 AR or M4 rifle magazines
- Takes 3 MOLLE slots down and 6 MOLLE slots transversely
-
Attach the pouches to the Velcro panel or in the organized bag 4 color-coded zippered pouches to keep medical or technical equipment organized. Small bags: 18x16x7 cm and large bags: 32x15x7 cm 7 cm high sides Velcro on the back to attach the pockets to the Velcro panel in the Specialist backpack small Color-coded to make it easier to find what you're looking for Fits: Anything – medical equipment, technical equipment, or personal items Beware: In the backpack, specialist, small *Content for illustrative purposes only. -
Not in stock - on order
The Edge is a 3-liter tactical hydration carrier. It can be attached directly to the K5 Plate Carrier or any other modular plate carrier using the K Series MOLLE Hydration Attach Straps. It can also be worn independently using the K Series Shoulder straps. The Edge accommodates the Hydrapak Tactical Hydration Reservoir selected by Agilite for its excellent durability and ease of use or other 3L hydration bladders of the same size. The sleek design is built to be extremely unobtrusive for use during urban battles in close-quarter. The opening is shaped so that the hydration resevior can easily slide in and out, even when it's full, without disconnecting the Edge from your rig. Equipped with external Molle loops for attaching extra pouches. Specifications- 1000D Mil-Spec Tactical Nylon
- Mil Spec Plastic Hardware
- Available in Multicam, Black & OD Green
- Made in Israel
-
A case to store your documentation equipment, maps, pens, etc. in a place where you can reach and see them when you move. Attach it to the front of the vest or chest. Attach your normal pouches to the outside of this case. Compartment for cards, pens and paper. Includes ring binder mechanism with Velcro that can be easily removed. Cords to secure the pins. Half-covered holder for a cyalume, so you can see what you're looking at in the dark with minimal exposure. Water repellent and strong to protect the content. Fold-back mounting system makes it possible to attach the pouch to any equipment or ballistic vest with MOLLE straps. Cable openings in the bottom. Fits: A5 paper and block, pens, rubber, small ruler, small tablet computer (e.g. iPad™ or Panasonic Toughpad FZ-M1™), cards, light sticks and memo cards. Beware: On the equipment vest Weight: 370 g Dimensions: 21 × 27 × 4 cm *Contents in the pouches are purely illustrative. No content included. -
Compact waist bag with versatile internal organization and external attachment points. Waist bags are already very versatile, but the Kukkaro is even more so thanks to the many ways you can customize it to suit your specific needs. On the inside, the bag has a number of options for organizing your belongings: elastic webbing loops of different sizes, flat pockets, tie-down loops and a loop surface for attaching organizers with hooks. The back wall has a large flat compartment for larger items. On top of the compartment is sewn a single row of 50 mm elastic webbing, which contains two smaller approx. 4 cm wide loops and a larger approx. 9 cm wide loop, suitable for small items such as multi-tools, lighters etc. The front wall has two small flat compartments with attachment loops at the top. An 18 x 10 cm loop area on the inside of the front makes it possible to attach all kinds of organisers with hooks, etc. A large, open flat pocket on the back of the backpack allows you to store the waist belt if needed and it can be used as a large belt loop if you want to carry the Kukkaro on a belt or the hip belt of a backpack. The PALS webbing on the side wings and bottom allows you to attach small pockets, elastic cords and accessories. The straps on the side wings can also be used to quickly attach the backpack to the compression straps on the side of a backpack using additional SR buckles or G-hooks. Such buckles or G-hooks are not included with the backpack. Learn Finnish with Savotta: "Kukkaro" is Finnish for a bag or pouch that is a type of handbag, but not a handbag, nor just any small bag. The free Finnish online dictionary www.sanakirja.org defines "kukkaro" as "a small, usually leather pouch or bag, in which one carries small necessities and accessories, such as money, tobacco, etc. By definition, such a small fanny pack is really the ultimate "kukkaro". KEY FEATURES- Capacity approx. 1.5 litres
- 25 mm SR buckle strap (max. circumference approx. 145 cm) attached to stabilizing wingsFlat open pocket on the body side for storing the belt
- Large main compartment with zipper
- One large and two small flat inner compartments
- One large and two small elastic loops for organization on the inside
- Two attachment points on the inside for dummy cords and carabiners
- 18 x 10 cm loop area on the inside for organizers with hooks
- 1 x 2 PALS weaving straps on both side wings
- 1 x 3 PALS weaving tapes at the bottom
- 15 x 5 cm loop surface on the outside for patches and identifiers
- Water drain grommets at the bottom
- All color options offer good NIR performance
- 5-year material and product warranty
- Made in Finland/Estonia
- Weight: 215 g
- Dimensions: 20 x 12 x 5 cm (W x H x D)
- Main fabric: 500D Cordura (100% Polyamide)
- Strap: 100% polyester
-
Be prepared for anything with the Skyweight Utility Chest Pack. Weighing less than a pound, this two-liter utility pack keeps essential tools at your fingertips. The main compartment is packed with EDC organization and is easily accessible thanks to the side fold opening. A zippered pocket and stretch woven front pockets keep high-priority items stored. The quick-release carrying system is adjustable and versatile. After removal, the backpack can be used as a standalone or as a waist bag. Hot pulls make access to the ambidextrous CCW compartment - suitable for compact pistols - FAST. An internal loop panel provides a fastening platform, while elastic bands are available to secure items. The breathable back panel keeps you comfortable and the padded feedthrough is compatible with standard straps, RUSH® 100 backpack lap belts or the Skyweight lap belt (sold separately). Gear loops, 1x1 side loops and bottom loops maximize carrying options. Whatever awaits you, you can rely on the Skyweight Utility Chest Pack. Details- Dimensions - 6"H x 10"W x 2.5"D
- Weight - .45kg / 1 lb
- Capacity - 120 cubic inches / 2-liter total capacity
- Lightweight, adjustable and quickly removable harness system
- Detachable harness for stand-alone bag or waist bag configuration
- Ambidextrous rear CCW compartment with internal loop panel and elastics for mags
- Hot pulls for quick access to CCW compartment
- Suitable for compact pistols
- Main compartment with plenty of storage compartments
- Main compartment with side folding opening
- Breathable back panel against chest
- Padded back feedthrough, compatible with the Skyweight waist belt, RUSH® 100 backpack strap or a standard strap (sold separately)
- Zipped front pocket
- Stretch woven front pockets
- Loops for belt at bottom
- Loops for equipment
- 1x1 loop
- 330D Nylon Ripstop