- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
FAST BLUES - COLD BLUES Fluna Gun Black is a quick tan (cold browning) for repairing tanning on rifle and pistol barrels. It is also suitable for blackening small metal parts such as screw heads etc. Attributes
- Easy to use
- Good degree of blacking
- Fast results
-
Use Fluna Gun Degreaser to clean the vessel from coarse dirt such as powder smoke, etc. Bring Fluna BORE PRO into the vessel, e.g. with a soaked felt pad or with a wet metal brush. Use a brushing stick guide. Make sure that the running steel is completely and evenly moistened. After the exposure time of approx. 15 minutes. moisten a metal brush (copper or brass) again with Fluna BORE PRO and push it in the barrel towards the bulkhead. Pay attention to caliber-precise brushes! With about 10 back and forth movements you brush away the metal deposits. Finally, wipe the barrel several times with clean felt pads or plasters and remove the deposit from the barrel. At the same time, the barrel is preserved by the remaining amount of Fluna BORE PRO, neutralization is not necessary. Alternatively, you can completely wipe the Fluna BORE PRO out of the barrel with Fluna Gun Degreaser and then preserve it as usual with Fluna Gun Coating. Attributes
- Cleans and preserves
- Very effective and fast results
- Harmless to running steel
-
Not in stock - on orderTHE FLUNA TEC OPTIC CARE SET For anyone who wants to clean and care optimally for hunting and sports optics. With this set, you get all the products you need for professional cleaning of the optics, including anticondens for all lenses. The set contains the following individual products:
- Fluna TFT / optic cleaner 100ml (RETFT00701)
- Fluna isopropanol 50ml (RIS0050120)
- Fluna Anti Fog 50ml (ABG0050120)
- Microfibre cloth 40 / 40cm
- Glass polish 20/20 each packed
- On the back of the inlet is a detailed product description.
- The product description of the individual products in the set can be found in the relevant item.
- First, remove loose dust from the optics – preferably by "blowing out" with a jet of compressed air.
- Clean the optics with the Fluna TFT/optic foam cleaner. Turn off electrical appliances for cleaning. Apply foam cleaner evenly thin (leave briefly inactive in case of strong pollution). Dry brush with the clean microfibre cloth.
- After cleaning, spray the glass of the optics with the isopropanol alcohol, to defropher the surface. Divide the alcohol with the included glass cloth and wipe away the excess liquid. Let the surface dry for a few seconds.
- Then spray the product Fluna spray against covering evenly thin on the glass surface and let the flow substance in for about 2 minutes. Then take the glass polish cloth and brush the glass surface evenly for as long until there is no more liquid to be seen and the glass surface is evenly covered and streakless. Allow the coating to dry for at least 30 minutes. To you can breathe against the glass. If the coating is applied correctly, the mist should dissolve immediately.
-
The FAB Defense Scorpus PG-9 double magazine bag, with its slim and compact design, provides a perfect fit for double-row Glock magazines. It features an innovative 8-step manually adjustable tensile resistance. This innovative system is specially designed for fast pulling and safe carrying. Details:
- Provides excellent protection for warehouses
- Slim and compact design.
- Innovative, manually adjustable tensile resistance in 8 steps.
- Pressure tab for tight and secure fit.
- Paddle with 35-degree angle adjustment.
- Durable glass fiber reinforced polymer composite construction.
- Includes belt clip and paddle.
- Suitable for 9mm and .40 GLOCK 17/19/22/23/25/26/27/31/32/33/34/35/37/38/39 magazines.
- Weight: about 121 g.
-
The ESS Tactical XT™ is an affordable, high-quality pair of glasses with all the key performance features of the ESS Striker™ Series, without the accessories. The 40mm strap has sliders to easily adjust the strap. The 2.6mm Polycarbonate lens provides essential ballistic protection with distortion-free optical clarity. Specifications
- Spacious frame fits over most prescription glasses
- Advanced ESS ClearZoneTM FlowCoat lenses eliminate fog inside and prevent scratches outside
- Full circumference ventilation & filtration system minimizes lens fogging & filters particles in the air
- High-impact 2.6mm polycarbonate lens
- Distortion-free optics & 100% UVA/UVB protection
-
Not in stock - on orderThe TITANSKIN™ series consists of different types of anti-stitch panels. The NIJ-0115.00 Level 1 Blade/Spike type panel protects the wearer against all common stabbing hazards such as knives, spikes and needles. The NIJ-0115.00 Level 1 Spike type panel is a 2.5 mm penitentiary harness that provides protection against penetration of prison sticks and spikes (Level 1 Spike). Specifications
- Ballistic Possibilities: Not Applicable Anti-Stab capabilities: NIJ-0115.00 Level 1 Knife and/or NIJ-0115.00 Level 1 Spike Armor material: Teijin Aramid Areal density: 5.5 kg/m2 (Knife + Spike) - 2 kg/m2 (spike only) Thinness: 7.7mm (blade + spike) - 2.5mm (spike only) Warranty: 5 years
-
Not in stock - on orderThe PRO-PLUS™ series ballistic panels have been tested according to the new NIJ Standard-0101.06 protocol and offer Level IIIA protection. The panel has a robust and durable ballistic design with layers of Dyneema®, combined with the latest Twaron Trauma Reduction Technology. This unique combination of technologies results in very low trauma values for the PRO-PLUS™ series compared to other ballistic packages on the market. The PRO-PLUS™ is designed for professionals, who are looking for highly protective armor panels that can take a beating. The durability of the PRO-PLUS™ series allows us to give a ten-year guarantee on the ballistic performance of this model. Specifications Ballistic Possibilities: NIJ level IIIA according to STD 0101.06 Protection against knives: NIJ 0115.00 P1 knife (15 Joules < 20.4 mm) - NIJ 0115.00 S1 knife (25 joules < 9 mm) V50 - .357 SIG FMJ: 575 mps Armor material: DSM Dyneema® / Teijin Aramid Areal density: 6 kg/m2 Thinness: 8.2 mm Warranty: 10 years
-
Not in stock - on orderThe MT-PRO™ panel offers a new level of protection and performance with the addition of stitch protection. This panel offers true multi-threat protection while maintaining the high standard of comfort that our customers have come to expect. Our MT-PRO™ meets the strict standards of NIJ .04 Level IIIA, but we went even further by testing the MT-PRO™ on eight different types of ammunition! The MT-PRO™ delivers excellent performance against shots close to the edge. By integrating DSM's Dyneema® fabrics with our proven TitanSkin™ anti-stab technology, we were able to develop a panel that offers both superior ballistic performance and stitch protection. The MT-PRO™ is one of the few products that stops the HOSDB P1 blade at 15 Joules (<20mm) and a hypodermic needle at 5 Joules, according to VPAM KDIW 2004. Specifications
- Ballistic Capabilities: NIJ Level IIIA according to STD 0101.04* + 7.62x25 Tokarev FMJ S&B (Brass Jacket) @1800 ft/s SK1 certified according to TR03/2008
- Needle protection: VPAM KDIW 2004 (5 joules)
- Knife protection: HOSDB P1 knife (15 Joules < 20mm)
- V50 - 9MM Luger DM41: 516 mps
- Armor material: DSM Dyneema® / Aramid
- Areale Density 5.4 kg/m2
- Thinness: 8 mm
- Warranty: 7 years
-
Not in stock - on orderThe FLEX-PRO-IIIA™ is the lightest and most advanced ballistic package in the EnGarde® line of soft armor panels. It is an ideal choice for customers who are looking for an extremely discreet solution with the highest level of protection. For this flexible panel we used Dyneema® Force Multiplier Technology. The result is a soft armor panel that is one of the world's lightest NIJ Level IIIA solutions. In addition to excellent protection against small arms bullets, the FLEX-PRO-IIIA ™ has one of the best V50 (fragmentation) performance in its class. As an added bonus, the FLEX-PRO-IIIA offers™ stab protection against ordinary knives. The FLEX-PRO-IIIA™ exceeds the latest NIJ standards for strength and durability, while keeping weight to a minimum and maximizing flexibility and comfort. Uncompromising quality and advanced engineering is why the FLEX-PRO-IIIA™ is our flagship. Specifications
- Ballistic Capabilities: NIJ Level IIIA according to STD 0101.06 + 7.62x25 Tokarev FMJ S&B (Brass Jacket) @1800 ft/s + 7.62x25 85gr Romanian Tokarev FMJ @1530 ft/s
- Protection against knives: NIJ 0115.00 P1 knife (15 Joules < 20mm) NIJ 0115.00 S1 knife (25 Joules < 20mm)
- V50 - .357 SIG FMJ: 554 mps
- V50 - STANAG 2920 17gr. FSP: 645 m/s
- Armor material: DSM Dyneema® / Teijin Aramid
- Areal density: 4,5 kg/m2
- Thinness: 6 mm
- Warranty: 7 years