- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes -
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes- Suitable for knives and all types of firearms
- Can be applied to any surface
- Transparent, residue-free, non-greasy coating
- Very good sliding properties, long-lasting effect
- Salt and freshwater resistant, economical in use
- High temperature resistance from -40°C to +750°C
- Does not shear, does not stick, is colorless and odorless
- Cleaning the weapon is made easier
-
Fluna Gun Cleaner is a high-performance running cleaning paste. It removes gunpowder and metal such as lead, copper or Tombak from the barrel and can be used for smooth and drawn barrels of pistols or long weapons. Scopes For the fast, mechanical cleaning of drawn and smooth running of rifles, pistols and revolvers. Do not apply to polished or otherwise treated metal surfaces, on plastic or wood. Attributes- Easy to use
- Cleans very effectively
- Fast results
- Safe for the drum steel
-
PISTOL MAINTENANCE FOR BEGINNERS AND SWITCHERS With the Fluna Gun Care Set 2 you can say goodbye to conventional gun oil with all the known drawbacks. From now on, you too can benefit from modern and effective pistol cleaning and Gun Care with a resistant, high-quality ceramic coating for your technically demanding weapons. Do it the same way professional teams do: use weapon maintenance that is economical, easy to use, odor-free, and with a long-lasting effect. With just two products from the Fluna Tec family of maintenance products, you can clean and maintain your firearms and knives in just a few steps. Get to know Fluna Tec weapon maintenance with the practical starter set, experience it for yourself and use other products as desired in the future, making the tedious weapon maintenance a time-saving pleasure. CONTENTS OF FLUNA GUN CARE SET 1 Fluna Gun Coating Aerosol 100 ml Fluna Gun Degreaser 100 ml Microfibre cloth 30 x 30 cm 1 / FLUNA GUN COATING AEROSOL In the future, use Fluna Tec's high-quality ceramic coating for weapon maintenance. Firearms and knives are protected by the sparsely applied film; Moving parts permanently run as if lubricated - dry and without the disadvantages of conventional gun oil. 2 / FLUNA GUN DEGREASER Cleaning guns is so easy: with the special cleaner and degreaser, oils and greases, waxes, as well as gunpowder smoke and combustion residues are quickly and completely removed. Fluna Gun Degreaser in the practical bottle is suitable for cleaning by hand and in an ultrasonic bath. 3 / LINT-FREE MICROFIBER CLOTH Use the microfiber cloth from the kit to clean all parts of your gun and get a streak-free, shiny result. After use, simply wash the microfibre cloth in the washing machine at 60 °C without fabric softener. INTRODUCING FLUNA TEC GUN MAINTENANCE By choosing Fluna gun care set 2, you have taken the first step towards an oil-free future for your gun. You are in the best company, because professional athletes, hunters and special forces in many countries have already opted for Fluna Tec's economical, clean and effective weapon maintenance. -
With the Fluna Gun Care Set 1, cleaning weapons has never been easier. With three Fluna Tec main products and matching microfiber cloth, you can clean your entire weapon without oil. From now on, you can rely on clean, economical and odorless gun cleaning and maintenance with ceramic coating. Cleaning firearms is usually not the most popular activity, but it is an extremely necessary one to ensure the desired features and smooth operation of firearms. The good news is that the products in Fluna Gun Care Set 1 are enough to completely clean and maintain your technically advanced firearms - without oil! - to clean and maintain them completely. Discover the time-saving and effective Fluna Tec system: clean all parts of the weapon, free the barrel from metal contamination and protect your weapon with the high-quality ceramic coating that professionals rely on. CONTENTS OF FLUNA GUN CARE SET 2- Fluna Gun Coating Aerosol 100 ml
- Fluna Gun Degreaser 100 ml
- Fluna Gun Cleaner 50 g
- Microfibre cloth 40×40 cm
-
FAST BLUES - COLD BLUES Fluna Gun Black is a quick tan (cold browning) for repairing tanning on rifle and pistol barrels. It is also suitable for blackening small metal parts such as screw heads etc. Attributes- Easy to use
- Good degree of blacking
- Fast results
-
Use Fluna Gun Degreaser to clean the vessel from coarse dirt such as powder smoke, etc. Bring Fluna BORE PRO into the vessel, e.g. with a soaked felt pad or with a wet metal brush. Use a brushing stick guide. Make sure that the running steel is completely and evenly moistened. After the exposure time of approx. 15 minutes. moisten a metal brush (copper or brass) again with Fluna BORE PRO and push it in the barrel towards the bulkhead. Pay attention to caliber-precise brushes! With about 10 back and forth movements you brush away the metal deposits. Finally, wipe the barrel several times with clean felt pads or plasters and remove the deposit from the barrel. At the same time, the barrel is preserved by the remaining amount of Fluna BORE PRO, neutralization is not necessary. Alternatively, you can completely wipe the Fluna BORE PRO out of the barrel with Fluna Gun Degreaser and then preserve it as usual with Fluna Gun Coating. Attributes- Cleans and preserves
- Very effective and fast results
- Harmless to running steel
-
Not in stock - on order
THE FLUNA TEC OPTIC CARE SET For anyone who wants to clean and care optimally for hunting and sports optics. With this set, you get all the products you need for professional cleaning of the optics, including anticondens for all lenses. The set contains the following individual products:- Fluna TFT / optic cleaner 100ml (RETFT00701)
- Fluna isopropanol 50ml (RIS0050120)
- Fluna Anti Fog 50ml (ABG0050120)
- Microfibre cloth 40 / 40cm
- Glass polish 20/20 each packed
- On the back of the inlet is a detailed product description.
- The product description of the individual products in the set can be found in the relevant item.
- First, remove loose dust from the optics – preferably by "blowing out" with a jet of compressed air.
- Clean the optics with the Fluna TFT/optic foam cleaner. Turn off electrical appliances for cleaning. Apply foam cleaner evenly thin (leave briefly inactive in case of strong pollution). Dry brush with the clean microfibre cloth.
- After cleaning, spray the glass of the optics with the isopropanol alcohol, to defropher the surface. Divide the alcohol with the included glass cloth and wipe away the excess liquid. Let the surface dry for a few seconds.
- Then spray the product Fluna spray against covering evenly thin on the glass surface and let the flow substance in for about 2 minutes. Then take the glass polish cloth and brush the glass surface evenly for as long until there is no more liquid to be seen and the glass surface is evenly covered and streakless. Allow the coating to dry for at least 30 minutes. To you can breathe against the glass. If the coating is applied correctly, the mist should dissolve immediately.
-
The FAB Defense Scorpus PG-9 double magazine bag, with its slim and compact design, provides a perfect fit for double-row Glock magazines. It features an innovative 8-step manually adjustable tensile resistance. This innovative system is specially designed for fast pulling and safe carrying. Details:- Provides excellent protection for warehouses
- Slim and compact design.
- Innovative, manually adjustable tensile resistance in 8 steps.
- Pressure tab for tight and secure fit.
- Paddle with 35-degree angle adjustment.
- Durable glass fiber reinforced polymer composite construction.
- Includes belt clip and paddle.
- Suitable for 9mm and .40 GLOCK 17/19/22/23/25/26/27/31/32/33/34/35/37/38/39 magazines.
- Weight: about 121 g.
-
With this patented combination lock you can secure your belongings in the suitcases of Explorer Cases. Due to the close fit of the locks, they stay in place and do not come out of the case. -
The ESS Tactical XT™ is an affordable, high-quality pair of glasses with all the key performance features of the ESS Striker™ Series, without the accessories. The 40mm strap has sliders to easily adjust the strap. The 2.6mm Polycarbonate lens provides essential ballistic protection with distortion-free optical clarity. Specifications- Spacious frame fits over most prescription glasses
- Advanced ESS ClearZoneTM FlowCoat lenses eliminate fog inside and prevent scratches outside
- Full circumference ventilation & filtration system minimizes lens fogging & filters particles in the air
- High-impact 2.6mm polycarbonate lens
- Distortion-free optics & 100% UVA/UVB protection
-
Not in stock - on order
The TITANSKIN™ series consists of different types of anti-stitch panels. The NIJ-0115.00 Level 1 Blade/Spike type panel protects the wearer against all common stabbing hazards such as knives, spikes and needles. The NIJ-0115.00 Level 1 Spike type panel is a 2.5 mm penitentiary harness that provides protection against penetration of prison sticks and spikes (Level 1 Spike). Specifications- Ballistic Possibilities: Not Applicable Anti-Stab capabilities: NIJ-0115.00 Level 1 Knife and/or NIJ-0115.00 Level 1 Spike Armor material: Teijin Aramid Areal density: 5.5 kg/m2 (Knife + Spike) - 2 kg/m2 (spike only) Thinness: 7.7mm (blade + spike) - 2.5mm (spike only) Warranty: 5 years
-
Not in stock - on order
The PRO-PLUS™ series ballistic panels have been tested according to the new NIJ Standard-0101.06 protocol and offer Level IIIA protection. The panel has a robust and durable ballistic design with layers of Dyneema®, combined with the latest Twaron Trauma Reduction Technology. This unique combination of technologies results in very low trauma values for the PRO-PLUS™ series compared to other ballistic packages on the market. The PRO-PLUS™ is designed for professionals, who are looking for highly protective armor panels that can take a beating. The durability of the PRO-PLUS™ series allows us to give a ten-year guarantee on the ballistic performance of this model. Specifications Ballistic Possibilities: NIJ level IIIA according to STD 0101.06 Protection against knives: NIJ 0115.00 P1 knife (15 Joules < 20.4 mm) - NIJ 0115.00 S1 knife (25 joules < 9 mm) V50 - .357 SIG FMJ: 575 mps Armor material: DSM Dyneema® / Teijin Aramid Areal density: 6 kg/m2 Thinness: 8.2 mm Warranty: 10 years -
Not in stock - on order
The MT-PRO™ panel offers a new level of protection and performance with the addition of stitch protection. This panel offers true multi-threat protection while maintaining the high standard of comfort that our customers have come to expect. Our MT-PRO™ meets the strict standards of NIJ .04 Level IIIA, but we went even further by testing the MT-PRO™ on eight different types of ammunition! The MT-PRO™ delivers excellent performance against shots close to the edge. By integrating DSM's Dyneema® fabrics with our proven TitanSkin™ anti-stab technology, we were able to develop a panel that offers both superior ballistic performance and stitch protection. The MT-PRO™ is one of the few products that stops the HOSDB P1 blade at 15 Joules (<20mm) and a hypodermic needle at 5 Joules, according to VPAM KDIW 2004. Specifications- Ballistic Capabilities: NIJ Level IIIA according to STD 0101.04* + 7.62x25 Tokarev FMJ S&B (Brass Jacket) @1800 ft/s SK1 certified according to TR03/2008
- Needle protection: VPAM KDIW 2004 (5 joules)
- Knife protection: HOSDB P1 knife (15 Joules < 20mm)
- V50 - 9MM Luger DM41: 516 mps
- Armor material: DSM Dyneema® / Aramid
- Areale Density 5.4 kg/m2
- Thinness: 8 mm
- Warranty: 7 years
-
Not in stock - on order
The FLEX-PRO-IIIA™ is the lightest and most advanced ballistic package in the EnGarde® line of soft armor panels. It is an ideal choice for customers who are looking for an extremely discreet solution with the highest level of protection. For this flexible panel we used Dyneema® Force Multiplier Technology. The result is a soft armor panel that is one of the world's lightest NIJ Level IIIA solutions. In addition to excellent protection against small arms bullets, the FLEX-PRO-IIIA ™ has one of the best V50 (fragmentation) performance in its class. As an added bonus, the FLEX-PRO-IIIA offers™ stab protection against ordinary knives. The FLEX-PRO-IIIA™ exceeds the latest NIJ standards for strength and durability, while keeping weight to a minimum and maximizing flexibility and comfort. Uncompromising quality and advanced engineering is why the FLEX-PRO-IIIA™ is our flagship. Specifications- Ballistic Capabilities: NIJ Level IIIA according to STD 0101.06 + 7.62x25 Tokarev FMJ S&B (Brass Jacket) @1800 ft/s + 7.62x25 85gr Romanian Tokarev FMJ @1530 ft/s
- Protection against knives: NIJ 0115.00 P1 knife (15 Joules < 20mm) NIJ 0115.00 S1 knife (25 Joules < 20mm)
- V50 - .357 SIG FMJ: 554 mps
- V50 - STANAG 2920 17gr. FSP: 645 m/s
- Armor material: DSM Dyneema® / Teijin Aramid
- Areal density: 4,5 kg/m2
- Thinness: 6 mm
- Warranty: 7 years