Accessories Archieven

Not in stock - on order
Agilite Pincer Placard

€83,90 – €97,95
The Agilite Pincer Placard™ is an elastic placard with hook backing that can hold three 5.56 magazines. Thanks to the revolutionary, patent-pending funnel-shaped magwell design, you can grab or re-index a warehouse with just one hand, while still maintaining a rock-solid retention so your magazines never fall out. Elastic warehouse bags are popular because of their easy access and low profile. However, they all have 1 of the 2 flaws: Either they are too closed, so it is almost impossible to re-enter a warehouse with 1 hand. Or they're too loose for you to reposition a magazine, but you have to worry about it falling out because of unreliable retention. The Pincer Placard™ solves both problems and gives you the best of all worlds. The patent-pending funnel-shaped magwells guide your magazines into the bags, so you can re-insert a warehouse with just one hand without any problems. Despite this possibility, the forceps pockets still hold the magazines tightly, so you never have to worry about losing them. The Pincer Placard™ comes standard with both MOLLE placard buckles and G hooks and has a built-in height adjustment capability so that it fits not only on Agilite plate carriers, but also on any placard-compatible plate carrier and instantly gets a perfect fit. It also has laser-cut loops on the side for attachment to common chest harness systems. The base of the Pincer placard is made of laser-cut Mil-Spec Squadron material that allows water drainage but covers the ends of your magazines to protect them from dust, dirt, and wear that can cause weapon failure. The Polymer magwells give elastic pouches long-lasting reliable retention and superior durability where they normally fall apart. While not required, the Placard also has a loop interior, so you can add Agilite Jump Retention tabs if your unit's regulations require for skydiving, rotating or maritime operations or if you just want to add an extra layer of retention. They include Agilite's patented AG™ technology with polymer pull tabs, so even when applied, they give you unhindered one-handed access to your magazines. Whether you're defending your country on the tip of the spear or defending your family, the Agilite Pincer Placard gives you an edge. Details:

Suitable for three 5.56 warehouses

Magazine bag with brackets for plate carriers

Patented funnel-shaped warehouse tubes guide the warehouse to the optimal insertion point, so the magazine doesn't get stuck and can be re-indexed quickly

Polymer magwells give elastic pouches long-lasting reliable retention and superior durability

Attaches to any Agilite or other plate carrier or backpack in seconds

Built-in ability to adjust the height for perfect positioning of the plate carrier

Compatible with both G Hook and Placard Buckle (both included with the product)

Allows the warehouse to be quietly picked up or reinserted

Designed, tested and tested in battle in Israel

Specifications:

Suitable for three 5.56 warehouses

Weight: 181 grams

Dimensions: 25cm*9cm (9.8" x 3.5")

Patent pending durable polymer magwells

Patented mil-spec G hooks

Including mil-spec polymer MOLLE Placard buckles

Laser-cut Squadron mil-spec laminate fabric

Size: The Pincer Placard fits on any plate carrier that is suitable for placards and is equipped with both G-Hooks and MOLLE placard buckles. The Pincer placard is built for three 5.56 warehouses and can also be used for similar or smaller items. Hook and loop chest pan dimensions: 25cm*9cm (9.8" x 3.5") FAQ: Q: Does this fit on my Plate Carrier ? A: The Pincer Placard can be attached to any Agilite or other plate carrier or backpack in seconds. Q: What caliber of magazines does the Pincer Placard fit on? A: The Pincer Placard™ only fits 5.56, AR-15 style magazines Q:Is this pouch also available in the singular? A: At the moment, the pincer placard is only available as a triple mag pouch Q:Do I need Jump Retention Tabs for the Pincer Placard? A:Only if your unit's regulations require them for skydiving, rotating or maritime operations or if you just want an extra layer of retention. If you put other items in the bag in addition to the 5.56 magazines, you can use them for additional retention. Q: Do items other than 5.56 warehouses fit in the pincer? A:Yes, it is intended for 5.56 magazines, but other objects of similar size can also fit in it, for example flashlights. For other items you can add the Agilite Jump Retention tabs
Details
Not in stock - on order

4Stable sticks spare parts KIT A

€13,95

Front upper support Bush Stick, Mountain Stick. Shipping within 24 hours.

Details
Not in stock - on order

4Stable sticks spare parts KIT B

€12,00

Upper end Bush Stick, Mountain Stick Shipping within 24 hours.

Details
Agilite AG3™ Placard Triple Mag Pouch

€62,95 – €71,45
The Agilite AG3 Placard is a bungee retention placard that allows you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way.

Suitable for three 5.56 magazines and can be attached to any plate holder with G-hooks or Placard buckles (both buckles and G-hooks included with the placard).

Bungee retention warehouse bags have been used for more than a decade because they hold warehouses well, but they have an inherent, annoying flaw. They make removing or returning a warehouse inconvenient, with two hands and two movements, because the warehouse keeps hooking on the bungee tabs.

AG pouches solve this age-old problem and go from HALO jump-level retention to safety off, mag draw, may re-index and back without ever taking your dominant hand off your weapon.

The custom-polymer pull tabs also allow both mechanical and friction grip to get the perfect grip, with or without gloves.

Whether you're defending your country at the tip of the spear or defending your family, AG pouches give you a head start.

Sizes

Fits three 5.56x45 AR or M4 rifle magazines.

The AG3 Placard fits ANY plate carrier and is equipped with both G-hooks and MOLLE buckles.

Specifications

500D CORDURA® Mil Spec Tactical Nylon |

Laser cut Velcro MOLLE overlay

Suitable for three 5.56 warehouses

Height adjustable

Weight: 0.16 kg

Including mil-spec G-hooks

Including mil-spec Polymer MOLLE Placard buckles

Details

Suitable for three 5.56 warehouses

Makes it easy to pull or place a magazine with one hand

Proprietary polymer pull tab for exceptional grip

Reliable retention to never lose a warehouse

With hook closure, to be attached to any plate carrier that Placard is capable.

Proven in battle in Israel

Smart retention lip meets military requirements without obstructing access to the bag
Select options Details
Agilite Six Pack™ Hanger Pouch

€74,95 – €82,95
The Agilite Six pack is designed to be the best hanger bag on the market. Validated in months of real missions, our goal was to eliminate all problems with existing hangers. Most hangers are too long, flapping and dangling under your belt line and hindering your movement. The geometry of the Six pack has been optimized to have the same storage capacity, but to be much more compact and not get in the way. Plate carrier hanger pouches make sense because they sit in a very accessible place on your kit, but many have top zippers that make it difficult to see what's inside. The Six Pack pendant seamlessly integrates with the rest of your gear, giving you both quick one-handed access and a view of the contents of your pouch. Many drop pouches also have external turnstile sleeves where the turnstile can fall out unless the pouch is full. The Six Pack has a built-in flap that holds the turnstile even when the bag isn't full, and has a protective cordura exterior. It also has designated spots for chemlights, markers and other essential items. The flap can be executed completely smooth just as easily, if you prefer. On the inside, you have more versatility than regular dangling bags, because you have internal elastic and a loop for attaching inserts with Velcro. It comes with an optional fanny pack conversion kit, so you can convert it in seconds for everyday use. For the organization you have 2 separate zip pockets with different tactile zipper heads, so you can distinguish them by feel, without having to look down. Operating in high-threat environments, our customers need to keep their eyes on the target and not have to constantly mess with their gear. Whether you're defending your country at the cutting edge, defending your community, or defending your home, the Six Pack gives you an edge. Details

Gives you extra, easily accessible storage space under your plate holder

Ergonomic shape is not too low so that it does not hinder your movements

Multiple internal and external fastening methods

Large capacity but more compact than traditional pendant bags

Built to make the contents of the pouch visible

Integrated lower flap gives quick access and protection to turnstiles

Can be converted into a fanny pack in seconds using a conversion belt (not included)

Proven in battle in Israel

Specifications

500D CORDURA® Mil Spec Tactical Nylon.

Milspec Webing

YKK Zippers

Drain hole

Dimensions: 9.6" x4.3" x2.7"

Weight: 154.5g

Storage capacity: 1.8 litres

Sizing

One size fits all

Can be attached via the loop of the front plate carrier or via the cover of the front plate bag

Content not included. Comes with a Fanny Pack conversion belt!
Select options Details
Not in stock - on order

Hogue handALL Tactical Grip Sleeve (Large) – Black

€18,90

Hogue grip cover for semi-automatic pistols. Scientifically designed to ensure you have more control over your weapon. Made for larger firearms with a grip frame with a mainly straight back strap * = POSSIBLE TRIMMING REQUIRED • AK-47: Wooden handle without finger grooves • AMT: Automag II, Automag III, Automag IV, Automag V • AR-15: Handles without finger grooves • Beretta: 8000 Cougar, 8040 Cougar, 8040 Cougar F, 8045, 87 Target, 92 FS, 92 FS Inox, 92 Centennial, 92 FS Fusion, 92 G, M9A3, 96 A1, • Beretta: 92 G-SD, 92 Brigadier, 92 Brigadier INOX, 92 Vertec INOX, 92 A1, M9, M9A1, 92 Compact *, • Beretta: 92 Compact Inox *, PX4 Storm SD Type F • Bernadelli: P018S • Bersa: Thunder 9, Thunder 9 Pro, Thunder 40 Pro, BP40CC, BP9 • Browning: Hi-Power, Hi-Power Clones • Canik: TP9 • Caracal: CP660, CP661 * • Chiappa: M9-22 CZ: 75, B, BD, B-SA Variants, SP-01, SP-01 Tactical, 75 Shadow Tac II, 75 Shadow Target II, 75 Tactical Sport, 75 TS Czechmate, P-07*, • CZ: P-09, P-10, 85, 85 Combat, 2075 Rami *, 52, 2075 Rami BD *, 97, 97 BD, 100, 75 Compact *, 75 PCR Compact *, 75 P-01*, • CZ: Compact SDP *, P-06 * • Colt: 2000 • EAA: Witness, Gold Custom Xtreme *, Limited Custom Xtreme *, Stock II Xtreme, Stock III Xtreme, Match Xtreme, Elite Stock III, • EAA: Steel Full Size, Polymer Full Size, Polymer Carry, Elite Gold Team, Elite Limited, Elite Limited Pro, Elite Match, Elite Stock III, • EAA: Elite Stock I, Elite Stock II, Hunter, Match • FEG: P9M, Hi-Power Clones • FNH: FN9, FNS40, FNX40, FNX9, FNS-9, Hi-Power, MKIII also, FNX45, Forty-Nine, FAL, DSA Rifles • Heckler & Koch: VP9, VP40, P30, P30L • High standard: Victor, Olympic, Olympic Trophy, Supermatic Trophy, 10X-Victor, Supermatic Citation • Jericho: 9 mm, 941 • Kel-Tec: RDB, CMR-30, RFB, KSG • Lama: Omni Magnum Research: MR9 Eagle, MR40 Eagle, Baby Eagle III Polymer Pistols, Baby Desert Eagle III Steel Pistols Mossberg: 590 Shockwave (must be installed from the tip of the receiver's handle) • Remington: RP9 • Ruger: SR9, SR9E, SR40, SR45 • Sarsilmaz: K2P, B6, CM9, ST9, K2, K12, Kilinc 2000, P8, B6P * • SIG SAUER: P556XL Pistol, P522 Pistol, 556, 522, P250 Full Size, P320 Full Size, 228/229 *, P250C *, P320C *, M11-A1 *, SP2022 * • Smith & Wesson: 39, 52, 59, 410, 411, 439, 459, 539, 559, 639, 645, 745, 909, 910, 915, 952, 1006, 1026, 1046, 1066, 1076, 1086, 3904 , • Smith & Wesson: 3906, 4003, 4004, 4006, 4026, 4043, 4044, 4046, 4505, 4506, 4526, 4546, 4563, 4566, 4567, 4576, 4583, 4586, 5903, • Smith & Wesson: 5904, 5905, 5906, 5906 Super 9, 5924, 5926, 5943, 5944, 5946, 5967, 6904 *, 6906 *, 6926 *, 6944 *, 6946 *, SW40F, SW9 • Springfield: P9 • Steyr: Model 28, Model 30, Model 31, Firestar Model 40, Firestar model 43 Firestar Model 45 • Steyr: M40, M9, L-A1, M-A1, C-A1 • Stoeger: Cougar, Cougar (compact versions) * • Taurus: 92, 92C *, 99, 100, 101, PT957 • Tokarev: TT-30, TT-33 • Walther: P99, PPQ, PPX, CCP

Details
Agilite Pincer™ Single 5.56 Mag Pouch |

€39,95 – €43,90
The Agilite Pincer Pouch is a MOLLE backed fast-draw low profile elastic mag pouch for a single 5.56 magazine. The patented funnel-shaped magnetic hole design makes it possible to grab or re-index a magazine with one hand. Open warehouse bags are popular, but have inherent flaws. They are often clumsy, clumsy, noisy or impossible to re-index a warehouse with one hand. The Pincer Pouch is lightweight, low profile, quiet and allows you to re-insert a magazine without a hitch. The Pincer Pouch is incredibly versatile, with a laser cut rear MOLLE to fit perfectly on all battle belts and plate carriers. The Pincer Pouch also has a loop on the inside so you can add Agilite Jump Retention tabs if your unit's regulations require it. They feature Agilite's patented AG™ polymer pull tab technology, so even when used, they give you unhindered one-handed access to your warehouses. Whether you're defending your country at the point of the spear, defending your family, or defending your home, Pincer Pouches will give you an edge. Sizing

ONE-SIZE-FITS-ALL

Fits a 5.56x45 AR or M4 rifle magazine.

Specifications

Fits in: A single 5.56 warehouse

Weight: 3oz (83g)

Dimensions: 14cm*9.5cm*3cm

Patented durable polymer magwells

Laser cut Squadron mil-spec laminate fabric

Details

Suitable for a 5.56 warehouse

MOLLE support

Can be connected to all battle belts and plate carriers

Quick-draw mag pouch with rock-solid retention

Patented magnet holder funnels magazines in the pouch, snag-free

Low profile elastic bag with superior durability and retention

Proven in Israel
Select options Details
Agilite AG1™ 5.56 Single Mag Pouch |

€29,95 – €34,95
Agilite AG Mag Pouches are bungee retention pouches that allow you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way. Bungee retention may pouches have been in use for over a decade because of how well they hold warehouses. but they have an inherent, annoying flaw. They make the removal or return of a mag a clumsy, two-convenient, two-motion process because the magazine sticks to the bungeelusjes. This is especially problematic with "tac reloads". AG pouches solve this age-old problem and go from HALO jump-level retention to safety, magazine pulling, magazine re-indexing and back without ever taking your dominant hand off your weapon. We don't believe in taking both hands off your weapon during a firefight, because we come from an environment where time outside the target and outside the weapon when the bullets fly around can easily cost you your life. Sometimes you can't miss that time to intervene again, because by grabbing you have to look down or take your second hand off your weapon. AG pouches use a combination of specially developed polymer pull tabs and various reinforced materials that work together to provide the retention level of closed-top pouches, but the fast pulling ability, without hooks, of open-top pouches. Your equipment should allow you to focus on the threat – it shouldn't bother or annoy you. The custom-made polymer pull tabs allow for both mechanical and friction grip for a perfect grip, with or without gloves. We don't believe in normal just because we've always done something a certain way doesn't mean we can't rethink it and evolve it to provide small but crucial benefits that improve your performance, comfort and safety. Whether you're defending your country on the tip of the spear or defending your family, AG pouches give you a head start. Details

Fits one 5.56 warehouse

Makes it possible to easily pull and insert the magazine with one hand

A patented polymer pull tab for exceptional grip

Reliable retention to never lose a warehouse

Built-in MOLLE rear mounting

Tested in battle in Israel

Smart retention tab meets military requirements without obstructing the entrance to the pouch

Specifications

500D CORDURA® Mil Spec Tactical Nylon

Laser cut Velcro MOLLE overlay

Takes 3 MOLLE slots down and 2 MOLLE slots transversely

Weight: 0.14lbs (0.06g)

Sizes

Suitable for one 5.56x45 AR or M4 rifle magazine

Takes 3 MOLLE slots down and 2 MOLLE slots transversely
Select options Details
Condor single kangaroo mag pouch gen II

€19,95
The Condor Single Kangaroo Mag Pouch Gen II magazine pouch offers space for an AR/M4 magazine and a pistol warehouse in a practical modular attachment. The simple, effective design includes an open bungee attachment and adjustable valve locks to ensure the warehouses stay securely stored inside and can be deployed in no time. Lasercut MOLLE is located at the back of the warehouse pocket to improve durability and weight. The Condor Kangaroo warehouse bag is compatible with the MOLLE webbing and can easily be attached to your plate carrier or chest rig in different places. Material 100% polyamide Details:

Detachable magazine holder with elastic cord.

Attached pistol magazine bag with removable and adjustable cover with Velcro.

Lasercut MOLLE on the back.

Detachable MOLLE / PALS fastening loops with push buttons.

Water drains on the floor.

Dimensions: approx. 12 x 7.5 x 2 cm (H / B/D).

Weight: about 120 grams.
Select options Details
Not in stock - on order

Hogue HandALL Universal Full Size Grip Sleeve – Black

€18,90

Hogue grip cover for semi-automatic pistols. Scientifically designed to ensure you have more control over your weapon. Do not use grab-protection firearms, such as Colt .45 pistols or Para Ordnance frames. * = POSSIBLE TRIMMING REQUIRED Astra: A-100, Constable II * • Beretta: PX 4 Storm Full, PX4 Storm Inox, PX4 Storm Compact & Subcompact * • Browning: Buckmark, Challenger II, BDA * • Colt: Double Eagle • Daewoo: DP51 • FNH: FiveSeven, FNS-40C *, FNP-9, FNP-40, FNP-45 GLOCK: 17, 17L, 18, 19, 20, 21, 22, 23, 24, 25, 26*, 27*, 28*, 29*, 30*, 31, 32, 33*, 34, 35, 37, 38, 39*, 40, 41 Heckler & Koch: VP 70-Z, HK 45 / Tactical, HK 45 Compact / Tactical, Mark 23, P2000, USP, USP Compact * / Tactical • Intratec: TECDC9, TEC22 • KBI: BK, Compact GKK-92C • Kel-Tec: PLR-16, PLR-22, PMR-30, Sub-2000 • Magnum Research: Baby Desert Eagle II polymer pistols, Baby Desert Eagle II steel pistols, Makarov Ruger: P85, P89, P90, P91, P93, P94, P95, P97, P345 Smith & Wesson: M&P 45, M&P 9C *, M&P 40C *, M & P45C *, Sigma 9 mm, Sigma 40, SD9, SD40, SD9 VE, SD40 VE • Sarsilmaz: 136, ST10, K2-45 • SIG SAUER: P220, P225, P226, Mosquito, P227, MK25, P210, SP 2340 * • Steyr: GB • Taurus: 24/7 (and G2 variant) full size, 24/7 C*, 809C *, 840C *, 809, 840, 845, PT945 • Walther: P38, P88, P1 • Zastava: 99

Details
Agilite AG3™ 5.56 Triple Mag Pouch |

€63,95 – €64,95
Agilite AG Mag Pouches are bungee retention pouches that allow you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way. Bungee retention may pouches have been in use for over a decade because of how well they hold warehouses. but they have an inherent, annoying flaw. They make the removal or return of a mag a clumsy, two-convenient, two-motion process because the magazine sticks to the bungeelusjes. This is especially problematic with "tac reloads". AG pouches solve this age-old problem and go from HALO jump-level retention to safety, magazine pulling, magazine re-indexing and back without ever taking your dominant hand off your weapon. We don't believe in taking both hands off your weapon during a firefight, because we come from an environment where time outside the target and outside the weapon when the bullets fly around can easily cost you your life. Sometimes you can't miss that time to intervene again, because by grabbing you have to look down or take your second hand off your weapon. AG pouches use a combination of specially developed polymer pull tabs and various reinforced materials that work together to provide the retention level of closed-top pouches, but the fast pulling ability, without hooks, of open-top pouches. Your equipment should allow you to focus on the threat – it shouldn't bother or annoy you. The custom-made polymer pull tabs allow for both mechanical and friction grip for a perfect grip, with or without gloves. We don't believe in normal just because we've always done something a certain way doesn't mean we can't rethink it and evolve it to provide small but crucial benefits that improve your performance, comfort and safety. Whether you're defending your country on the tip of the spear or defending your family, AG pouches give you a head start. Details

Suitable for three 5.56 warehouses

Makes it possible to easily pull and insert the magazine with one hand

A patented polymer pull tab for exceptional grip

Reliable retention to never lose a warehouse

Built-in MOLLE rear mounting

Tested in battle in Israel

Smart retention tab meets military requirements without obstructing the entrance to the pouch

Specifications

500D CORDURA® Mil Spec Tactical Nylon

Laser cut Velcro MOLLE overlay

Takes 3 MOLLE slots down and 6 MOLLE slots transversely

Weight: 0.35lbs (0.16kg)

Sizes

Suitable for three 5.56x45 AR or M4 rifle magazines

Takes 3 MOLLE slots down and 6 MOLLE slots transversely
Select options Details
5.11 Tactical Light Marker 2

€14,95
The 5.11 Tactical Light Marker 2 adds a light marker to any MOLLE, Web, Hexgrid® or lanyard attached platform. It uses the eco-friendly 5.11 Firefly Glow Technology that absorbs and emits light, making it easy to find your backpack, bag or other gear in the dark. A battery-free, maintenance-free, carefree light. Sold in sets of 2 of the same color. Features

Luminous photo marker

Compatible writing

5.11 Firefly technology

MOLLE loop hooks

Hook and loop back

Cord holes

TPU body

Visible light dimensions: 7.62 x 1.27 cm.

Sold by 2 of a kind.
Select options Details
Not in stock - on order

Snigel explosives patch with velcro

€5,95

An explosion symbol to mark your competence with explosives EOD etc. on the bag or pouch Velcro on the back Attached to the outside of the bag with Velcro patches 60 mm

Details
Not in stock - on order

SnigelDesign IEDD patch, Small -12

€8,95

A gray and black patch with the text IEDD.

Details
SnigelDesign 7.62 Elastic pouch 1.0

€29,95 – €32,45
A low profile, safe and versatile elastic pouch for all kinds of equipment that is to be carried on a trouser belt or tightly fit on an equipment vest.

Two outside compartments for pistol or SMG magazines, OC spray or any other smaller gear.

A full width inner compartment for a radio, 7,62 or 5,56 mm magazine or similar.

The pouch is made in an elastic fabric to stay as flat as possible and keep the content rattle free and secure.

Weight: 50 gr Dimensions: 8x15x2 cm
Select options Details
Agilite General Purpose Pouch

€53,95
Low-profile general-purpose pouch to store and organize essential items without sagging or flapping

MOLLE mount on the back (3 MOLLE slots on the front and 3 MOLLE slots on the bottom)

Pass-through for attachment to all straps

Built-in shock cord gives you the ability to tie items internally without wobbling or sagging.

Shock cord also serves as an attachment point for a Tourniquet

Built-in internal organization, including a loop for attaching velcro inserts.

Proven in battle in Israel

Sizing

Fits in one size

Can be attached to any MOLLE surface: Occupies 3 MOLLE slots at the bottom and across

Specs

500D CORDURA® Mil Spec Tactical Nylon

Milspec WebbingYKK Zippers

Drainage hole

*Content not included, for illustrative purposes only.
Select options Details

Title