• Not in stock - on order

    Savotta LJK

    545,00
    LJK This heavy backpack with external frame was originally designed for paratroopers of the Finnish army in the early 1980s. Capacity approx. 80 l. This backpack, designed for heavy military use, can be used more heavily than most users, such as a free fall of an aircraft. Given its properties, LJK is also suitable for average users and it is an excellent choice for those looking for a lifetime collaboration. The LJK backpack was launched in 1985. Originally designed for military use, the backpack was also warmly welcomed by civilian users. The special features of the model are a frame without the upper curve, which makes moving easier because it does not get in the way of the head. There are no pockets on the sides of the backpack in the lower section, which makes cross-country skiing with the backpack more comfortable. The LJK backpack is still used in the Finnish Armed Forces and is just as popular with recreational users. A traditional backpack with external frame is at its best with a heavy load, but is also suitable for lighter trips. The external tube frame ensures air circulation between the user's pocket and back, significantly reducing the heat load. Although anatomical backpacks have taken over some grass in the backpack market, there are still situations where nothing is better than an external frame backpack. Compartments The upper compartment of the bag (dimensions about 45 x 40 x 20 cm) is closed by attaching the opening of the drawstring, which is secured with a waterproof protective collar that also allows overpackaging. The opening is covered with a generous flap that is secured with straps. The straps are long enough to wear, for example, a sleeping bag or mat under the flap. If necessary, the straps can be easily extended with the included detachable straps. The top and lower pockets of the bag are separated by a built-in distributor. The valve of the upper compartment has a flat compartment for small objects (dimensions about 25 x 45 cm), which are also suitable for larger objects that need to be easily accessible. The exterior of the upper compartment is equipped with a flat card pocket with zipper (dimensions approximately 30 x 30 cm). The lower compartment of the bag (dimensions about 35 x 35 x 20 cm) opens on both vertical sides with a zipper. The zippers are protected with a button closure. The flaps should always be gently fastened, as they take away some of the weight and strain the zippers. The side pockets (dimensions approximately 40 x 10 x 7 cm) are closed by attracting the waterproof protective collar, which is covered with a flap that can be secured with straps. The left side pocket is divided into two compartments with a built-in distributor. The lower compartment is accessible via the zipper on the side. In the lower back there is a large outer compartment (dimensions approximately 32 x 25 x 10 cm) that is closed by tightening the protective collar. The bag is covered with a valve that is fastened with two straps. This bag is ideal for packing items that should be easily accessible during the walk, such as a camping stove and food. OTHER ANCHORAGES There is a generous number of fastening loops on top of the valve and in the main compartment. This makes it possible to secure even large loads (such as the beloved Sissi tent) on or under the valve by means of detachable tires. The loops on the inside of the flap are perfect for attaching a sleeping mat. Especially a military-style tent mattress can be attached to this by means of the elastic bands. Axes or other long, narrow stocks can be transported behind the tunnel-shaped side pockets. The fasteners with straps above the side compartments ensure the attachment of the supplies. The lower corners of the shoulder straps have loops that serve as attachment points for small objects, such as water bottles. SUPPORT SYSTEM The frame of the support system is the strong aluminium tube frame of the LJK model. Unlike civilian backpacks, LJK does not have an upper bend because the bend easily sits in the head when it is necessary to move on rough terrain. Furthermore, the frame of LJK has been reinforced with additional support blocks. The shoulder straps and waistband are firmly padded and anatomically shaped. The buckle of the hip belt can be detached very quickly with one hand. It is a very valuable feature in a possible emergency. The nodded chest strap provides extra comfort and support when wearing. The stepless adjustable (length) support support system and lap belt of the backpack can be adapted to users of all different heights and sizes. It is possible to adjust the center of gravity of the shoulder straps even while walking by tightening and loosening the straps attached to the top of the frame. The centre of gravity of the backpack itself between the shoulders and the hips is adjusted by loosening and tightening the shoulder straps and hip belt. TECHNICAL SPECIFICATIONS: External dimensions: height 85 cm, width 55 cm, depth 30 cm. Content: 80 l. Weight: 3.70 kg. Materials: fabric 1000D Cordura, polyester bands, metal buckles and Kroko zippers. Frame: DUR aluminium. Colour: olive green. WARRANTY AND WARRANTY: The product has a 10-year warranty against material and manufacturing defects. KEY FLAG PRODUCT: This Finnish Key Flag product is partially manufactured at our factory in Estonia, but more than 50 of its work is made in Finland. This product is no longer made by Savotta. The Savotta Jääkäri XL replaces this article.
  • Not in stock - on order

    Engarde COMFORT™ series

    550,00735,00
    The COMFORT™ is the most flexible ballistic package in the EnGarde® soft armor panel product line. The COMFORT™ is an ideal choice for customers who are looking for an extremely concealable and comfortable solution. Although all our armor products can be worn by men or women, the COMFORT ™ panel is particularly popular with our female customers. Thanks to its extreme flexibility, the COMFORT™ panel is easy to hide, even for people with a smaller stature. The new Dyneema® material that we use in our COMFORT™ soft armor panel allows for a ballistic panel that is four times more flexible than our previous NIJ Level II product. This full-wrap design provides NIJ Level II protection and has been tested according to the Swedish RPS 1 standard, including 9 x 19 DM11 A1B2, .357 Magnum JSP and 9×19 FEB clean range ammunition. Specifications
    • Ballistic capacities: NIJ level II according to STD 0101.04 RPS 1 PVS/P 036/08
    • Armor material: DSM Dyneema®
    • Areale Density: 4 kg/m2
    • Thinness: 4.9 mm
    • Warranty: 10 years
    Included in the package: Ballistic plates + Deluxe carrier + Baby carrier.
  • Not in stock - on order

    Engarde PRO-PLUSIIIA™series

    590,00787,00
    The PRO-PLUS™ series ballistic panels have been tested according to the new NIJ Standard-0101.06 protocol and offer Level IIIA protection. The panel has a robust and durable ballistic design with layers of Dyneema®, combined with the latest Twaron Trauma Reduction Technology. This unique combination of technologies results in very low trauma values for the PRO-PLUS™ series compared to other ballistic packages on the market. The PRO-PLUS™ is designed for professionals, who are looking for highly protective armor panels that can take a beating. The durability of the PRO-PLUS™ series allows us to give a ten-year guarantee on the ballistic performance of this model. Specifications Ballistic Possibilities: NIJ level IIIA according to STD 0101.06 Protection against knives: NIJ 0115.00 P1 knife (15 Joules < 20.4 mm) - NIJ 0115.00 S1 knife (25 joules < 9 mm) V50 - .357 SIG FMJ: 575 mps Armor material: DSM Dyneema® / Teijin Aramid Areal density: 6 kg/m2 Thinness: 8.2 mm Warranty: 10 years
  • Not in stock - on order

    GECO 3-9X40I

    595,00
    Like the GECO 3-9x42, this rifle scope also has an objective lens diameter of 40 mm. The GECO 3-9x40i comes without a rail. Proven for decades, this all rounder is particularly compact and easy-to-handle, and is perfect for stalking and high-seating. The illuminated reticle and large lens diameter make it equally ideal for hunting in twilight.

    PRODUCT FEATURES

    Diameter (mm) 25,4
    Length (mm) 317
    Weight (g) 428
    Field ov view (m/100) 12,0-4,0
    Reticle 4
    GECO optical sights are unique in both the optical and mechanical quality and performance that they offer in this price class. The riflescopes catch the eye with their slender and extremely compact length and low weight. The excellent optical quality is reflected in the very good fields of view and high transmission values. Large lens diameters ensure sufficient light reserves that extend deep into twilight. The fine, illuminated GECOdot with automatic shutoff (automatic reflex sight) and the integrated target turret (sight tower) GECOtrac are unique features in this class. All products have a 5-year warranty.
  • Not in stock - on order

    GECO 3-12X56

    595,00
    The classic all-rounder for hunting from a blind and nighttime hunting. Its 56 mm diameter lens, high transmission, and illuminated reticle offer increased reliability, even in extremely unfavorable lighting.
    GECO optical sights are unique in both the optical and mechanical quality and performance that they offer in this price class. The riflescopes catch the eye with their slender and extremely compact length and low weight. The excellent optical quality is reflected in the very good fields of view and high transmission values. Large lens diameters ensure sufficient light reserves that extend deep into twilight. The fine, illuminated GECOdot with automatic shutoff (automatic reflex sight) and the integrated target turret (sight tower) GECOtrac are unique features in this class. All products have a 5-year warranty.

    PRODUCT FEATURES

    Diameter (mm) 30
    Length (mm) 340
    Weight (g) 674
    Field ov view (m/100) 12,5-3,0
    Reticle 4
     
  • Not in stock - on order
    Here in the cold north, we have always relied on heated shelters and tents to keep us alive and head out into the wilderness. The HAWU tents are the latest step in the long evolutionary line of heated Finnish oven tents. What really sets the HAWU apart from its predecessors is the modular structure, which makes it possible to split it up for transport, to lay tree trunks, to expand, to house people, material and much more. Due to its robust construction and functionality, the HAWU has built a solid reputation among both professional and recreational users, including a number of military organizations. MAIN FEATURES:
    • Designed for four people, expandable to six people with an optional centre section
    • Oven compatible for year-round use in any climate thanks to a lockable opening in the oven pipe
    • Durable and fire retardant for continuous use
    • Split in two for transport and use
    • When setting up around a tree trunk, no sticks are required, HAWU tent poles are optionally available
    • Easy to set up by one person
    • 2-year warranty on material and craftsmanship
    • Finnish Key Flag product
    TECHNICAL SPECIFICATIONS: Weight
    • Doorpiece: 4.50 kg
    • Wall piece: 3.50 kg
    • Extension: 3.80 kg
    Dimensions
    • Door + wall parts: 3.50 x 3.50 x 1.60 m (L x W x H)
    • Door + extension + wall parts: 5.00 x 3.50 x 1.60 m (L x W x H)
    Floor space
    • Door + wall parts: 10.00 m2
    • Door + extension + wall parts: 15.25 m2
    • Material: Breathable, rainproof, antifungal and fire retardant special fabric
    HAWU 4 SYSTEM COMPONENTS
    Door piece The front half of the tent with zipper and flue pipe connection can be used as a loose tarpaulin in Loue style Wall piece: The sturdy rear part of the tent can be used as a freestanding Loue-style tarpaulin Expansion: A separate middle section with which the HAWU 4 can be extended to a maximum of six people DETAILED DESCRIPTION
    The HAWU is a highly customizable security system designed for long-term use. It is perfect for the most demanding environments, also for military use all year round. Designed for versatility and adaptability, the HAWU is highly flexible when it comes to finding a suitable place to set up. This requires very few accessories. The core of its flexibility are the zippers that connect the tent parts together and allow them to be distributed and placed around tree trunks.
    The door is designed so that you step into the tent instead of crawling under a low side entrance. A freely hanging inner wall prevents the warm air from escaping from the tent when the zippered door is opened. A useful function if someone has to keep watch at the same time and look at the lit heater.
    There is a steel oven tube opening with a hinged lid between the door and the top of the front part. This design provides safety when using an oven for heating. If no oven is used, the folding cover closes the connection from the outside.
    The side zippers provide a quick way out, especially during military operations or in case of emergency. The zippers and their rolled-up outer cover allow for a very fast emergency exit - open the zipper a little from top to bottom and just push yourself through!
    The top of the tent is made of excess fabric that can be used to cover the top when a center stick is used. The tip can be left completely open or left open only on one side, depending on the wind direction, which regulates the ventilation and evaporation of moisture, depending on the conditions. When using an oven, it is advisable to keep the tip open so that the warm air can drain moisture.
    HAWU tents are standard made of a naturally fire retardant and breathable fabric that has been treated against mold resistance. The fibers in the fabric swell when wet to ensure effective sealing against rain without the need for waterproof and poorly breathable coatings. For large orders, such as procurement by the military and government agencies, we can, and we have done so in the past, make the HAWU from other substances specified by the customer. CONSTRUCTION POSSIBILITIES
    The split design offers flexibility in both transport and assembly. Thanks to the numerous mounting methods, the HAWU can be set up practically anywhere, which minimizes the time and effort required to find the perfect location. Around a tree: The halves can be mounted around a tree trunk, so there is no need to wear or manufacture separate center posts on site. Another advantage of this method is camouflage, where the treetops provide excellent camouflage for aerial exploration. Hanging: Instead of using a central support, trunk or pole, the HAWU can be hung on a rope between two trees. This creates space in the tent for more people or to set up equipment for maintenance and work. With a central pole: the usual old-fashioned way also works with the HAWU. For this we offer specially made telescopic mid-sticks. Side parts: The two halves of the HAWU can be used separately as smaller open protective sails. This allows a larger team to split up and take half the tent with them.
    Due to the smart design of the corner sheath lines, no corner poles are needed. Just cut the lines or tie them around a rock or tree and pull on the quick belt adjusters to adjust the tension, and you're done. The lack of corner bars also means that there are far fewer separate components to maintain and move, which is a big advantage in suboptimal environments and under stress. As such, herrings are not strictly necessary, but are recommended. Although the shaving lines can be attached to the terrain and vegetation, this is not always possible. The corners of the hem should also be attached to the floor for a safe seal. The HAWU tent does not contain pegs, but we offer these as a separate accessory.
    The upper loops and the carabiner mounting system that secures the top of the tent make it possible to set up the HAWU with a standard center pole to attach a tree or hang it at the top. THE HAWU STORY The origins of Hawu tents go back to 1993 when Pasi Ylirisku, the current CEO of Hawu Pro Oy, and his staff began developing a new tent design. For more than two decades, they have tested and improved the Hawu tent to perfection with great attention to detail. In 2016, Finn-Savotta Oy and Hawu Pro Oy signed a cooperation agreement. The design of the Hawu tent was completed in collaboration with Savotta's designers and Hawu's original mass production design and development team. The first batch, which was completed in autumn 2017 and put up for sale.
  • Not in stock - on order
    Here in the cold north, we have always relied on heated shelters and tents to keep us alive and head out into the wilderness. The HAWU tents are the latest step in the long evolutionary line of heated Finnish oven tents. What really sets the HAWU apart from its predecessors is the modular structure, which makes it possible to split it up for transport, to lay tree trunks, to expand, to house people, material and much more. Due to its robust construction and functionality, the HAWU has built a solid reputation among both professional and recreational users, including a number of military organizations. MAIN FEATURES:
    • Designed for four people, expandable to six people with an optional centre section
    • Oven compatible for year-round use in any climate thanks to a lockable opening in the oven pipe
    • Durable and fire retardant for continuous use
    • Split in two for transport and use
    • When setting up around a tree trunk, no sticks are required, HAWU tent poles are optionally available
    • Easy to set up by one person
    • 2-year warranty on material and craftsmanship
    • Finnish Key Flag product
    TECHNICAL SPECIFICATIONS: Weight
    • Doorpiece: 4.50 kg
    • Wall piece: 3.50 kg
    • Extension: 3.80 kg
    Dimensions
    • Door + wall parts: 3.50 x 3.50 x 1.60 m (L x W x H)
    • Door + extension + wall parts: 5.00 x 3.50 x 1.60 m (L x W x H)
    Floor space
    • Door + wall parts: 10.00 m2
    • Door + extension + wall parts: 15.25 m2
    • Material: Breathable, rainproof, antifungal and fire retardant special fabric
    HAWU 4 SYSTEM COMPONENTS
    Door piece The front half of the tent with zipper and flue pipe connection can be used as a loose tarpaulin in Loue style Wall piece: The sturdy rear part of the tent can be used as a freestanding Loue-style tarpaulin Expansion: A separate middle section with which the HAWU 4 can be extended to a maximum of six people DETAILED DESCRIPTION
    The HAWU is a highly customizable security system designed for long-term use. It is perfect for the most demanding environments, also for military use all year round. Designed for versatility and adaptability, the HAWU is highly flexible when it comes to finding a suitable place to set up. This requires very few accessories. The core of its flexibility are the zippers that connect the tent parts together and allow them to be distributed and placed around tree trunks.
    The door is designed so that you step into the tent instead of crawling under a low side entrance. A freely hanging inner wall prevents the warm air from escaping from the tent when the zippered door is opened. A useful function if someone has to keep watch at the same time and look at the lit heater.
    There is a steel oven tube opening with a hinged lid between the door and the top of the front part. This design provides safety when using an oven for heating. If no oven is used, the folding cover closes the connection from the outside.
    The side zippers provide a quick way out, especially during military operations or in case of emergency. The zippers and their rolled-up outer cover allow for a very fast emergency exit - open the zipper a little from top to bottom and just push yourself through!
    The top of the tent is made of excess fabric that can be used to cover the top when a center stick is used. The tip can be left completely open or left open only on one side, depending on the wind direction, which regulates the ventilation and evaporation of moisture, depending on the conditions. When using an oven, it is advisable to keep the tip open so that the warm air can drain moisture.
    HAWU tents are standard made of a naturally fire retardant and breathable fabric that has been treated against mold resistance. The fibers in the fabric swell when wet to ensure effective sealing against rain without the need for waterproof and poorly breathable coatings. For large orders, such as procurement by the military and government agencies, we can, and we have done so in the past, make the HAWU from other substances specified by the customer. CONSTRUCTION POSSIBILITIES
    The split design offers flexibility in both transport and assembly. Thanks to the numerous mounting methods, the HAWU can be set up practically anywhere, which minimizes the time and effort required to find the perfect location. Around a tree: The halves can be mounted around a tree trunk, so there is no need to wear or manufacture separate center posts on site. Another advantage of this method is camouflage, where the treetops provide excellent camouflage for aerial exploration. Hanging: Instead of using a central support, trunk or pole, the HAWU can be hung on a rope between two trees. This creates space in the tent for more people or to set up equipment for maintenance and work. With a central pole: the usual old-fashioned way also works with the HAWU. For this we offer specially made telescopic mid-sticks. Side parts: The two halves of the HAWU can be used separately as smaller open protective sails. This allows a larger team to split up and take half the tent with them.
    Due to the smart design of the corner sheath lines, no corner poles are needed. Just cut the lines or tie them around a rock or tree and pull on the quick belt adjusters to adjust the tension, and you're done. The lack of corner bars also means that there are far fewer separate components to maintain and move, which is a big advantage in suboptimal environments and under stress. As such, herrings are not strictly necessary, but are recommended. Although the shaving lines can be attached to the terrain and vegetation, this is not always possible. The corners of the hem should also be attached to the floor for a safe seal. The HAWU tent does not contain pegs, but we offer these as a separate accessory.
    The upper loops and the carabiner mounting system that secures the top of the tent make it possible to set up the HAWU with a standard center pole to attach a tree or hang it at the top. THE HAWU STORY The origins of Hawu tents go back to 1993 when Pasi Ylirisku, the current CEO of Hawu Pro Oy, and his staff began developing a new tent design. For more than two decades, they have tested and improved the Hawu tent to perfection with great attention to detail. In 2016, Finn-Savotta Oy and Hawu Pro Oy signed a cooperation agreement. The design of the Hawu tent was completed in collaboration with Savotta's designers and Hawu's original mass production design and development team. The first batch, which was completed in autumn 2017 and put up for sale.
  • 30 years of experience in building large military backpacks. The main upgrade is the new "Herma" buckle, a buckle that is both brand and female in one buckle. That makes it possible to attach it wherever you want. No more searching for the right buckle to connect with. The depth of the backpack is small, but the width and lengths are long to carry what you need, but to be as close to your body as possible makes it easier to carry it. Shaped to sit nice and tight along the back. Stiff head hole and cut out in the lid so you can lean your head back when carrying the backpack. Shoulder pads are made of foam plastic and 1mm hard plastic for comfort and an even balance of weight. They have a chest strap and handset/microphone attachment. The main compartment has a large U-shaped opening with zipper to access the upper part of the backpack. The opening is covered with PALS on the outside. The sleeping bag compartment in the bottom of the backpack is also accessible through a U-shaped opening in the bottom of the backpack. This compartment is made variable in size so that a large sleeping bag fits in it. Two removable 11-litre side pockets with zippered opening on both sides that are accessible when you're on the backpack or in the tent. The side pockets can be connected as a backpack or worn separately. Top cover that can also be worn as a hip bag or small backpack. The top cover is designed to carry a spare sweater, mines, a drinking system, your administration book or something similar. 3L Zippered lid pocket for flashlights, spare batteries, insect repellent etc. Holder for a helmet, your poncho or something similar on top of the lid. Hip belt with plastic layer and sturdy foam for comfort and stability. It has steel O-rings so that a sled can be attached to it. The hip belt is attached in the middle, allowing you to move freely. Sled attachment points on the hip belt. Velcro patch for marking the owner. Roll up the ends of all the tires. The frame has been enhanced with a stiffer construction to make carrying the backpack even more comfortable. Size 100L Model: 29-01161C09-100 Weight: 5000 g Dimensions: 85 × 36 × 20 cm Color: Grey  
  • Not in stock - on order

    JÄÄKÄRI XL

    The largest backpack in the Jääkäri series. An external frame design for heavy and cumbersome loads, capacity approximately 70 l. The Jääkäri XL is an improved model of the modular LJK parachutist backpack, originally designed for the Finnish armed forces. The PALS attachment system provides great scalability to the outside when you need it. Fully height-adjustable and generously padded thermoformed shoulder harness and lap belt combined with a robust external tubular aluminium frame ensure that the Jääkäri XL can carry extremely heavy loads comfortably. KEY FEATURES Content 70 l Height adjustable portable system Padded shoulder straps with chest strap Padded detachable hip strap Main compartment with roll top and floating lid Zipper pocket on the inside of the lid Multiple small compartments to store your belongings Internal hydration compartment (e.g. Source WLPS 3L) Compression straps on the side External tubular aluminium frame PALS compatible for attaching extra bags 5-year warranty on material and craftsmanship Finnish Key Flag product TECHNICAL SPECIFICATIONS Weight: 3.7 kg Dimensions: 79 x 32 x 23 cm (H x B x D) Main material: 1000D Cordura (100% polyamide) Band: 100% polyester Frame: aluminium tubes DETAILED DESCRIPTION The support system is based on the venerable LJK parachutist suit frame, an external frame made of aluminum tubes, and offers a very wide height adjustment range for a perfect fit. This backpack is designed to carry extremely heavy loads, just as its military predecessors have been since the early 1980s. With the roll top at the top, the zipper at the bottom and a drawstring distributor on the inside, you can use the main pocket in any way you want. By opening the distributor, the main pocket turns into a huge hollow space, allowing you to pack very large and long items. The zipper at the bottom provides quick access to all the gear you need most during the day, while the roll top provides weatherproof protection for most of your gear. The lower zippered compartment features elastic compression straps on the inside and four small mesh pockets to organize your gear. A zippered pocket on the inside of the lid provides secure storage for your wallet, keys, travel documents and phone. The roll closure, the floating lid and the compression straps on the side offer a wide range of adaptability to the volume of the backpack. Fasten it tightly or loosen it, depending on the load carried. The compression straps ensure that additional equipment can be attached to the outside of the backpack if necessary. External side pockets at the bottom can be used to provide tools, tripods etc. Secure to the sides of the backpack. A hydration compartment is attached to the inner back wall. Tube ports on both sides allow you to direct your hydration bladder tube from the left or right, while keeping the other port free for other uses, such as antennas or cables. MILITARY GRADE MATERIALS Most of the materials we use for our commercial production are the same ones we use in equipment for the Finnish Armed Forces and other defense and security customers. Our most commonly used fabric in load carriers is extremely wear-resistant 1000D Cordura, according to FDF specifications, with polyurethane coating on the inside. The tires and edge tape we use are, again according to the FDF specifications, strong polyester bands in different widths and thicknesses for different applications. Our green and M05 camouflage materials and accessories meet the strict FDF specifications for NIR reflection levels as they should be, as the same materials are used in official military equipment. Modularity With PALS straps on the lap belt, sides, lid and bottom of the backpack, you can attach extra pockets and equipment. This system offers numerous options to customize the package to your specific needs. Not only for pouches, the PALS band can also be used for attaching utility straps, shock cord, carbine hooks etc. The lap belt can be removed from the frame for use as a stand-alone equipment belt. With suitable bags attached to them, you can use them instead of or in combination with a small day pack. HEIGHT ADJUSTABLE CARRYING SYSTEM When carrying heavy backpacks over long distances, it is extremely important that your backpack fits just right. The length adjustable lap belt and shoulder belt can be moved both up and down the frame to be suitable for users with a length of 160-200 cm. The external LJK tubular aluminium frame ensures that the backpack does not hang and transfers the weight of the backpack to your hips, even when loaded with heavy and cumbersome load. Both the shoulder harness and the lap belt are generously filled with thermoformed foam filling with closed cells. The shoulder harness is S-shaped and has a detachable chest strap. The forward pull setting on the lap belt is easy to put on even under load. The buckle on the side provides quick and easy opening when needed. The high LJK frame offers good lifting possibilities. Load lifts are mounted between the top of the frame and the shoulder belt. The Savotta Jääkäri XL is the replacement for the Savotta LJK which goes out of the range.
  • Electric GAMO compressor, portable all-in-one, up to 320 bar to fill the tank of your PCP. With 220V "charger" and car. With Gamo you can easily and comfortably fill your PCP; Economic
    Compressor for PCP rifles 250 W
    · Maximum 320 bar, 3 loading phases; It's manual.
    · Voltage 220v, 220v charger (12V / 220V) or car connection
    · Weight: 9 kg
    ✔ Exhaust air: 11 l / min.
    ✔ Rising air flow rate: 2700 r.p.m./min
    – 0.5 air cylinder. It takes 6 to 7 minutes from 200 to 300 bars
    – 0.5 air cylinder. It takes 18 to 20 minutes from 0 bar to 300 bar 110 – 220 V
    Only to fill the "tank" of carbine or pistol, no large bottles.
  • Not in stock - on order

    Engarde MT-PRO™ IIIA series

    628,00836,00
    The MT-PRO™ panel offers a new level of protection and performance with the addition of stitch protection. This panel offers true multi-threat protection while maintaining the high standard of comfort that our customers have come to expect. Our MT-PRO™ meets the strict standards of NIJ .04 Level IIIA, but we went even further by testing the MT-PRO™ on eight different types of ammunition! The MT-PRO™ delivers excellent performance against shots close to the edge. By integrating DSM's Dyneema® fabrics with our proven TitanSkin™ anti-stab technology, we were able to develop a panel that offers both superior ballistic performance and stitch protection. The MT-PRO™ is one of the few products that stops the HOSDB P1 blade at 15 Joules (<20mm) and a hypodermic needle at 5 Joules, according to VPAM KDIW 2004. Specifications
    • Ballistic Capabilities: NIJ Level IIIA according to STD 0101.04* + 7.62x25 Tokarev FMJ S&B (Brass Jacket) @1800 ft/s SK1 certified according to TR03/2008
    • Needle protection: VPAM KDIW 2004 (5 joules)
    • Knife protection: HOSDB P1 knife (15 Joules < 20mm)
    • V50 - 9MM Luger DM41: 516 mps
    • Armor material: DSM Dyneema® / Aramid
    • Areale Density 5.4 kg/m2
    • Thinness: 8 mm
    • Warranty: 7 years
    * .44 Magnum SJHP Remington type R44MG3 @ 436 (± 9 m/s) and 9mm FMJ-RN Remington type L9MM2 @ 436 (± 9 m/s) Included in the package: Ballistic plates + Deluxe carrier + Baby carrier.
  • Not in stock - on order

    GECO 4-12X50I

    645,00
    The GECO 4-12x50i is another rifle scope in the GECO 1'' rifle scope series. The objective lens diameter of the optics is 50 mm. With reticle 4 in the second focal plane and a fine luminous point enable precise shots even at long ranges. Also suited to poor light conditions thanks to the large lens diameter and illuminated reticle. GECO optical sights are unique in both the optical and mechanical quality and performance that they offer in this price class. The riflescopes catch the eye with their slender and extremely compact length and low weight. The excellent optical quality is reflected in the very good fields of view and high transmission values. Large lens diameters ensure sufficient light reserves that extend deep into twilight. The fine, illuminated GECOdot with automatic shutoff (automatic reflex sight) and the integrated target turret (sight tower) GECOtrac are unique features in this class. All products have a 5-year warranty.

    PRODUCT FEATURES

    Diameter (mm) 24,5
    Length (mm) 336
    Weight (g) 516
    Field ov view (m/100) 9,0-3,0
    Reticle 4
     
  • Not in stock - on order
    An overjack designed for the operator with an emphasis on camouflage and camouflage. The use of this jacket will significantly reduce your visual and thermal signature Very good visual camouflage Limited thermal radiation camouflage (NIR) Front closed with push buttons Flame retardant A ghillie jacket designed for the operator to be used outside the normal jacket or in hot weather outside a shirt can be worn outside the vest of the equipment Material Flame retardant polyester mesh Beware: Outside the equipment vest
  • Not in stock - on order
    HIISI 4 The Hiisi 4 is a portable sauna tent for four people for outdoor use, easy to set up and almost anywhere to set up. The light weight and compact packaging size make transport and storage easy. Take it to the beach, deep forests, mountains or backyard and enjoy a good warming Finnish sauna session wherever you are. Stove and benches are sold separately! KEY FEATURES
    • Designed for four people
    • Easy to transport and set up
    • Compatible with the Savotta stove + stone rack
    • Fire retardants
    • Transport bag included
    • Includes centre pole, six corner poles and six poles
    • 2-year warranty on material and manufacture
    • Finnish Key Flag Product
    TECHNICAL SPECIFICATIONS
    • Weight: 8.7 kg (including all accessories)
    • Dimensions: 250 x 140/200 cm (D x H)
    • Pack size: 150 x 30 x 10 cm
    • Floor area: 5.4 m²
    • Materials:
    • Ceiling: 50/50 CO / PES ripstop (FR), fire retardant and mold resistant
    • Wall: 210D PA (FR), fire retardant and mold resistant
    • Piles: aluminium
    • Stakes: galvanised steel
    • Transport bag: 600D PES
    DETAILED DESCRIPTION The sauna has been a central and honored place in Finnish life for centuries, a place of birth and death, life and celebration. The word "hiisi" is old Finnish for a sacred place, a place of sacrifice or mystical power - the perfect family name for our sauna tents and accessories. The Hiisi 4 is built around the basics of our field camps, corner poles, telescopic centre pole, shaving lines and pegs. The canines are inserted into covers on the outside of the tent, which makes the interior a little less crowded. The ceiling and wall material is fire retardant for safety, but not fire resistant, so sparks and flames will burn holes in it, so be careful. The interior is large enough for two double sofas, totalling four people, and the stove. The stove is at the back, benches on the sides. The window at the back lets in some light and lets you enjoy the view out. Two zippers are used to close the door, which can also be rolled up and secured by two strips of Velcro. A piece of cord is attached to the centre of the ceiling, which is intended as a confirmation point for a sauna thermometer to help you keep up with the temperature and not overheat the tent. The tent, poles and poles can be neatly stored in a carrier bag for transport. Shoulder straps allow you to carry a backpack so you have your hands free for cookers or other accessories.
    INSTRUCTIONS - READ BEFORE USE! We recommend two to four people to set up the Hiisi 4. You need a hammer or similar tool to smash the poles into the ground. We recommend using a sauna thermometer of up to 100°C to prevent overheating and help you get the perfect temperature.
    1. Find a suitable flat spot about 3.5 x 3.5 m, beware of dangers: Dry grass and undergrowth, trees and branches (fire hazard). Uneven surface (heater or users may stumble and fall).
    2. Unseed and insert the corner sticks into the sleeves.
    3. Spread out the tent sheet with the sticks approximately at the place you want it to have.
    4. Set one or two opposite angles at the same time: Hammer a stick about in the ground. 140 cm from the corner. Attach the corner rope to the pole with a reliable knot. Repeat until all corners are in place and each shaving line is pinned to the ground.
    5. Install the telescopic center pole, use the pen to adjust it for the correct height and tension.
    6. Inspect the tent, correct if necessary by adjusting the poles, poles and ropes.
    7. Install heater and benches.
    8. If available, attach a sauna thermometer of up to 100 °C to the line hanging from the ceiling. The thermometer should hang 150 cm above the ground.
    9. Do not heat the Hiisi 4 above 75 °C, extreme overheating can damage the tent and is not necessary - it is steam that makes the sauna pleasant, not hot air.
    10. Enjoy (carefully)!
    WARNINGS - READ FOR USE! This sauna tent is designed to be heated with the Savotta wood stove and stone rack. If used incorrectly, the heated heater can cause numerous hazards and bodily injury:
    • Savotta sauna tents are not designed for long-term idling and must be disassembled, cleaned, dried and stored indoors between use. Sunlight will damage the substances over time. By keeping a tent upright for several months, it is damaged and any damage caused by this type of abuse is not covered by our warranty.
    • To prevent tent damage from falling sparks, the top of the chimney should protrude 100 cm above the chimney opening. We recommend firing hardwood to minimize the risk of sparks.
    • Although the substances are fire retardant and self-extinguishing, they are not fire resistant - sparks and flames will damage and burn holes in the fabric. Heater heated tents will in normal use incur some burnt holes due to sparks that touch the fabric. This is normal wear and tear and can be easily repaired if necessary. Our warranty does not cover fire damage due to normal or incorrect use.
    • Use only stones intended for sauna use. Incorrect stones can burst when heated and cause injury due to flying shrapnel.
    • Sparks and heat from the stove can ignite nearby combustible substances
  • Not in stock - on order
    Both powerful and effective. The compact and lightweight design combined with the very large fields of view and the large exit pupil make spotting a relaxed activity. The high transmission values create bright and high-contrast images for hunting until nearly nightfall.

    PRODUCT FEATURES

    Length (mm) 192
    Weight (g) 1200
    Field ov view (m/1000) 129
    Exit pupil 7
    Close focus 2,3
    The field glasses in the GECO line provide the perfect entry to the world of high-quality binoculars in unbeatable value for money. The slender and ergonomic design was combined with the use of high-quality materials. The housing is made entirely of magnesium. The scope delivers a large field of view, sharp edge definition, high transmission values and a great short focus thanks to ED glass, multilayer coating and an adjusted optic calculation. These models stand out from their competitors thanks to their robustness, low weight and optical performance. All products come with a tripod connection, a shoulder strap and a hard case. GECO binoculars for hunting are available in 8x and 10x magnification.
  • Not in stock - on order
    LJK MODULAR A modular, heavy-duty backpack with external frame, designed for the Finnish Armed Forces in 2008. Capacity approx. 80 l. The modular LJK is designed to meet the needs of the armed forces for a modern military backpack. The characteristics and details are well thought out according to the needs of the 21st century without compromising durability and reliability in extremely heavy military use. The backpack can be customized to your needs with separate pockets and numerous attachment points. There's not much left of the old LJK backpack, except for the name, external frame design and a construction that can withstand pretty much anything. The compartments and structure of the entire backpack have been completely redesigned. The end result is more practical than before and considerably more versatile. The modular LJK has also proved to be a functional and reliable carrier when used by the Finnish armed forces and the Finnish border guard. A traditional backpack with external frame is at its best with a heavy load, but is also suitable for lighter trips. The external tube frame ensures air circulation between the pocket itself and the user's back, significantly reducing the heat load. Although anatomical backpacks have taken over some grass in the backpack market, there are still situations where nothing is better than an external frame backpack. Compartments The upper compartment of the bag (dimensions about 50 x 35 x 25 cm) is closed by attaching the opening of the drawstring, which is secured with a waterproof protective collar that also allows overpackaging. The opening is first covered with a attached straps and is then covered with a generous flap that is secured with buckle closures. The straps are long enough to wear, for example, a sleeping bag or mat under the flap. In addition to the buckles on the straps, there are spare metal buckles under the valve in the event of a worst case scenario. The top and lower compartments of the bag are separated by an intermediate shot that can open, allowing the whole bag to be changed to one large compartment if desired. In the upper compartment there is a mesh bag for small items. The pouch can also contain a wide hydration bladder and on each top corner of the backpack are exhausts for the hoses. The bottom compartment of the bag (dimensions approximately 35 x 35 x 25 cm) is closed with a two-way zipper that is secured with two buckles. The buckles should always be fastened because they take away some of the weight and strain the zippers. The side pockets (dimensions approximately 30 x 17 x 11 cm) open from the top with long zippers. The side compartments are removable and can be attached to the sides or back of the backpack at the necessary height. They can also be completely omitted if desired. The bags are attached to the backpack with MOLLE girders used in military equipment. It is a very simple, durable and reliable attachment method. OTHER ANCHORAGES There is a generous number of fastening loops on top of the valve and in the main compartment. This makes it possible to secure even large loads (such as the beloved Sissi tent) on or under the valve by means of detachable tires. The loops on the inside of the flap are perfect for attaching a sleeping mat. Especially a military-style tent mattress can be attached to this by means of the elastic bands. There are several belt loops on the sides and back of the backpack that can be attached to various essentials with detachable straps. The backpack comes with four two-piece buckles that can be moved freely between the backpack's attachment points. By default, they are used to strengthen the attachment of the side boxes. There is a lot of MOLLE webbing on top of the flap, on the sides, back and bottom of the bag and in the lower compartment for attaching additional pockets. You can also easily tie supplies to the girth using detachable straps. The lower corners of the bag have open pockets to attach long devices, e.g. an axe handle, to the side of the backpack. The lower corners of the shoulder straps have loops that serve as attachment points for small objects, such as water bottles. SUPPORT SYSTEM The frame of the support system is the strong aluminium tube frame of the LJK model. Unlike civilian backpacks, it has no upper bend because the bend easily sits in the head's way when it is necessary to move on rough terrain. Furthermore, the frame is reinforced with additional support blocks. The shoulder straps and waistband are firmly padded and anatomically shaped. In addition, the lower back is supported by a separate thick pillow. The buckle of the hip belt is a special plastic buckle that can be pulled in both directions and can be opened by pressing on the middle. The nodded chest strap provides extra comfort and support when wearing. The stepless adjustable (in length and width) supporting support support system and hip belt of the backpack can be adapted to users of all different heights and sizes. It is possible to adjust the center of gravity of the shoulder straps even while walking by tightening and loosening the straps attached to the top of the frame. The centre of gravity of the backpack itself between the shoulders and the hips is adjusted by loosening and tightening the shoulder straps and hip belt. TECHNICAL SPECIFICATIONS: External dimensions: height 80 cm, width 35 cm, depth 30 cm. Content: 80 l. Weight: 3.90 kg. Materials: 1000D Cordura, polyester band, special Delrin plastic buckles and Kroko zippers. Frame: DUR aluminium. Colour: olive green. WARRANTY AND WARRANTY: The product has a 10-year warranty against material and manufacturing defects. KEY FLAG PRODUCT: The product has a 10-year warranty against material and manufacturing defects. This product is no longer made by Savotta. The Savotta Jääkäri XL replaces this article.

Title

Go to Top