• Our Laser Cut Compact Dump Pouch can be attached to the belt or to any Warrior Series carrier. Made from a combination of Mil-Spec elastic and nylon for an ultra-compact design. To open, simply release the outer Hypalon safety tab, then pull the inner tab to fully open the bag. To repack, place the bag section back into the pocket and reattach the safety tab. This is attached with 2 MOLLE arms. Made from our high-quality composite laminate material and fabricated using our advanced laser cutting machines. Dimensions & Weight Length: 13 cm Width: 8.5 cm Height: 4 cm Weight: 0.083 kg
  • Not in stock - on order
    Our laser-cut IFAK bag is designed to store an operator's personal medical kit, including combat mesh, CAT and/or trauma bandage. They are all safely stored in a removable cover that fits into the outer cover. The cover and medkit are held securely in place by elastic sides and Velcro. A large tab with non-slip Hypalon coating is attached to the inner cover and if you pull it with force, the inner cover comes loose from the otter pouch, allowing you to open it quickly and easily with one hand. The Laser Cut IFAK is designed to be attached horizontally to one of our Warrior straps, by means of 4 MOLLE arms. It can also be mounted vertically using our Warrior 90-degree adapter. Please note, content is not included and for illustrative purposes only.
  • The Warrior Assault System Personal Medic Rip Off Pouch to store the first aid kit, the pouch can be separated from a platform by means of Velcro and Velcro straps, the platform stays on the vest /chest harness, wide opening 2-way zipper, inside elastic loops to attach the first aid kit. Dimensions: approx. 13.5 x 7.5 x 20 cm (LxWxH), weight approx. 325 g. The WAS equipment bags are equipped with a Molle fastening system, i.e.dat the bags can be attached very flexibly to vests, chest harness, backpacks and belts. Made of water repellent 1000D Cordura, all webbing according to US Mil Spec, the materials used have the lowest infrared values (99.8%) and are manufactured to military specifications. The filling material (Medic equipment) is not included.
  • The patent-pending Warrior's Medic Rip Off Pouch fits a wide variety of medical equipment. Elastic compartments and tabs organize the kit in order of use. Space for 2 x C.A.Ts 2 x compression bandages 2 x Quick Clot Combat Gauze Bolin Chest Seal Airway Scissors The pouch is held firmly in place by Velcro and supported by webbing. Pull back the Velcro and use the pouch in the traditional shape or pull the pouch to tear the pouch off the panel. Thus, it can be immediately passed on to another user or injured person, and the owner can continue with the mission or go to the target. The Medic Rip Off pouch takes up 4 rows of MOLLE on any compatible chest strap or bag. *Content not included, for illustrative purposes only.
    • The Warrior Assault Cargo Pack is a small backpack that can be attached to a ballistic vest or worn with the detachable shoulder straps, emergency shoulder straps,
    • integrated 3-litre blowing compartment (bladder not included),
    • large main compartment with zipper,
    • small patched zip pocket with subdivision,
    • Compression straps,
    • 4 loops of Molleband each on 2 levels to attach additional bags,
    • 2 Velcro closures for the drinks hose.
    • Dimensions: approx. 18 x 18 x 38.5 cm (LxBxH),
    • Weight: about 730 grams.
    • Made from water-repellent 1000D Cordura, all tires according to US Mil Spec, the materials used have the lowest infrared values (99.8%) and are produced according to military specifications.
  • The Warrior Assault System Standard Grab Bag can be used as an E&E bag and has the following details: Main compartment with zipper and 3 dividers and Velcro opening for the cable channel: 1. Shallow compartment with 3 wide rubber belt loops, 2. Wide middle compartment with pocket for mobile phone or radio and loops for rubber straps for pens or glowsticks, 3. Shallow outer compartment with fully fleece-lined walls, including pistol holster with Velcro and single magazine pocket. The main compartment is well protected by a detachable lid with transparent card compartment (27x36 cm), this is secured with a Fastex closure.
    • The external Molle section is equipped with 3 modular M4 warehouse bags,
    • side pocket for mobile phone with Velcro closure
    • on the other side is a modular 9mm double magazine bag,
    • on the back there is a pocket for the hose with Velcro where the hip belt can be stored,
    • adjustable shoulder strap with Velcro and modular pocket for tools or magazines.
    Standard version with 3 M4 magazine bags for the following magazines: 2 x M4 (5.56), SA80, P Mags, H&K 416, Diemaco, Sig 516, (G36 fits, but cannot be pulled so quickly). Dimensions: approx. 32 x 12 x 25 cm (LxWxH), Weight approx. 1400 g. Made of water repellent 1000D Cordura, all webbing according to US Mil Spec, the materials used have the lowest infrared values (99.8%) and are manufactured to military specifications.
  • Not in stock - on order
    Warrior's discreet Armor Carrier has large plates in front, rear and stand-alone side plates. The RICAS Compact also has Nexus Level 3a Soft Armor on the front, back and inside around the arms. Offers 10% less protection than the original RICAS but offers improved mobility. Fully adjustable.
  • Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The shoulders are fully adjustable and have an emergency release on one side which frees the left shoulder area and allows the operator to remove the rig without having to remove the operator's helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately).
  • Not in stock - on order
    Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The Dynamic Combat System (DCS) is a lightweight, unobtrusive system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The DCS can contain large plates at the front and back and has the option to wear side plates "6 x 6" or "6 x 8". NEXUS N.I.J. Level 3a Front, Back and Side Armor can also be used with I.C.W. style plates and for additional protection against I.E.D.s armor carrier, with detachable sides. The shoulders are fully adjustable and have an emergency release on one side, which frees the left shoulder area and allows the operator to remove the rig without taking off his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D Spacer Mesh lining is used for comfort and allows body heat away from the body surface while helping with airflow to cool. The DCS is designed to be worn in conjunction with the Warrior Frag Belt (sold separately).
  • Not in stock - on order
    Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for special forces requirements, PSD operations as well as Police Tactical Operations/SWAT. The shoulders are fully adjustable and have an emergency release on one side, freeing the left shoulder area and allowing the operator to remove the rig without having to remove his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). The DCS DA 5.56 mm (Direct Action) comes standard with 5 x Open Mags for 5.56 mm Magazines and 2 x Small Utility/Medic Pouch.

Title

Go to Top