- Padded laptop sleeve with zipper, sizes up to 15"
- Main compartment with document sleeve and mesh pocket
- Quick-access gadget compartment
- Top front pocket with organiser panel
- Lower front pocket with mesh pockets
- Two side pockets
- Tulle on all compartments for drainage
- Volume: 2022 Cu In// 33L
- Overall size: 45.72cm H x 40.64cm W x 10 25.4cm D
- Main compartment: 45.72cm H x 30.48cm W x 17.78cm D
- Top front pocket: 20.32cm H x 20.32cm W x 6.35cm D
- Front bottom pocket: 6 cm high x 12 cm wide x 2.5 cm deep
- Side pocket: 29.21cm H x 12.7cm W x 3.81cm D
- Hip belt: 86.36cm - 152.4cm
- Imported
-
The Condor Urban Go Pack is designed with functionality in mind. With plenty of small pockets that can fit everything without having to dig through a huge main compartment, but not so many that they're too small to carry the necessary stuff. This everyday assault pack is suitable for everyone from students and outdoor enthusiasts to military professionals. Specifications -
The Condor Vanquish RS plate carrier from the Vanquish Armor System (VAS) is made of a robust nylon construction and has fast-opening connectors that allow the user to quickly remove the carrier in an emergency. Compared to conventional MOLLE loops, the Lasercut MOLLE is lighter, more resistant to cracks and has a flat profile. The Vanquish RS Plate Carrier can be individually adapted to the missions, for example it has removable front/back cushions, laser-cut MOLLE and laser-cut MOLLE Velcro on the front and back. Suitable for Medium and Large Swimmer / ESAPI plates up to 25 x 30 cm. Material- 100% polyamide
- Inner lining: 100% polyester
- Quick release system with ROC buckles on the shoulders and sides.
- Laser-cut MOLLE laminate on the front, back and sides.
- Adjustable shoulder straps.
- Adjustable abdominal strap with Velcro pockets for ballistic inserts.
- Removable inner lining.
- Flat card/ document bag with Velcro closure.
- Easily accessible plate bags.
- Suitable for protective plates up to about 25 x 30 cm.
- Recovery handle.
- Velcro surfaces on the front and back for ID patches.
- Compatible with VAS accessories.
- Weight: about 1189 grams.
-
With a padded laptop compartment, several quick access compartments and 27.5 litre capacity, the Condor Venture Pack offers plenty of space and accommodation for personal items. The Condor Venture Pack is designed to take technology into the field. Equipped with a laptop sleeve, multiple compartments for quick access, and a bungee retentive storage bag, the Venture can organize all your gadgets and keep them ready to go. Material 100% polyamide Details:- Detachable hip strap with MOLLE loops that can be used as a combat belt.
- Padded 3D Airmesh back section.
- Ergonomically shaped shoulder straps and chest strap.
- Main compartment with mesh pockets and a padded laptop compartment.
- Flat back pocket for a water bag.
- Small fleece-lined front pocket with zipper.
- Zippered pocket.
- Zippered pocket with subdivision for office /administration.
- Compressible open retractor.
- MOLLE attachment loops for extra pockets.
- Handle.
- 4 compression belts.
- Velcro surface for ID patch.
- Drain hole.
- Capacity: approximately 27.5 litres.
- Dimensions: ong. 53 x 35 x 16 cm.
- Weight: about 2170 grams.
-
On the modern battlefield, communication is key, just as important as your firepower or ballistic protection. The Skeletonized Comms Wings Set is a set of two plate carrier side wings that can accommodate most individual radios, including AN/PRC-148 or AN/PRC-152. Each wing is adjustable in height for different radio configurations (with or without battery etc.). More so – the wings also accommodate 2 AR-style magazines. The laser-cut holes on the front have been carefully designed to work with the side buckles of the Front Flap Rig Interface.- RAW MATERIAL: Cordura® 500D and Nylon 210D laminate
- Size: one-size-fits-all
- WEIGHT [LB]: 0.18
- WEIGHT [G]: 80
- DIMENSIONS [IN] : reed 8.85'', height 6.5'' (dimensions single piece)
- DIMENSIONS [CM]: width 22.5cm, height 16.5cm (dimensions per piece)
- SKU: PO-SKCW-CD5
-
Not in stock - on order
At 2150 cubic centimeters, the Halftrack™ is a great 3-day backpack with a large main compartment for all your essentials. The Halftrack features a zippered pocket on the top and a large zippered front pocket optimized for carrying PRC-117 radios. Two large side pockets on the outside for two 3-liter drinking bladders and MOLLE weaving straps around the backpack give you the option to add pouches and accessories you need. A stowable rain cover keeps the elements out and your gear dry.
Hydration Carry
Organization 
Included Rain Fly TECHNICAL SPECIFICATIONS Volume: 2150 c.i. / 35.23L Weight: 6lbs 2oz / 2.78kg Dimensions: 23.5H x 18W x 8D / 59.69cm H x 45.72cm W x 20.32cm D BACKPACK FEATURES
Gossamer Frame - Internal fold-out storage compartment
- - Double internal hydration bladder sleeves
- Internal PRC-117 radio tripod
- Stowable rain cover included
- Gossammer frame
-
Not in stock - on order
The X1 Euro™ has excellent accessibility to the entire interior of the backpack via zippers at the top and lower zippers at the front. A fold-down shelf allows you to use the upper and lower rooms independently of each other or as a combined space. Generous storage compartments keep your smaller items organized, and a full-width rifle sheath keeps your hands free. Lightweight MOLLE-10 webbing provides mounting options for a variety of gear and accessories. TECHNICAL SPECIFICATIONS- Total volume: 2.175 c.i. / 35.64L (c.i. does not include the volume of the sheath)
- Weight: 5.75 lbs
- Main bag dimensions: 24H x 11.25W x 10.5D
- Sheath Dimensions: 34"L x 10"W, with an opening of 24" circumference
- The patented centerline Backscabbard is wider with a new compression-style stability feature that holds virtually all shotguns steadily, from lever to bolt-action to AR-type rifles.
- Eberlestocks MOLLE-10 Padlock webbing matrix is 60% lighter than traditional MOLLE webbing, but is suitable for most standard 25mm MOLLE accessories.
- The Gossamer lightweight polycarbonate frame offers more support and is suitable for heavier loads.
- Vertically adjustable shoulder harness for a custom fit for most torso lengths.
- Use our large reversible rain cover for weather protection.
-
The Explorer Cases 2209.BE is a black transport case with inner dimensions of 220 x 160 x 95 mm. The case is indestructible, 100% waterproof and provides complete protection for all your fragile and valuable belongings. The case is fully certified and can therefore withstand the harshest conditions and shocks. Is there something wrong with your suitcase? Then you can rely on a lifetime warranty! . By means of optionally available accessories, you can also equip this Explorer Case with, for example, picking foam, a combination lock or shoulder kit. - Explorer Cases article: 2209.BE -Model: Empty - Color: Black Application Explorer Cases 2209.BE The transport case is an extremely suitable tool for the safe transport of smaller electronics such as a DSLR, smartphone, but also for camera lenses, for example. Due to its compact size and light weight, you can safely take the case - with its contents - with you wherever you go. In addition, the 2209 is allowed as carry-on luggage on the plane. The Explorer Case 2209 is also available in orange and green. Do you want this case in that other color, or have you seen another Explorer Case that you can't find with us? Please contact us. Why Explorer Cases Italia? • Lifetime warranty • 100% waterproof, moisture-proof and dustproof • Resistant to chemicals by means of demonstrable certificates • Resistant to hard impacts • Effortless to use at temperatures from -33 to + 90 C° • Allowed as carry-on baggage on the plane • 100% Made in Italy SpecificationsBrand: 
Explorer Cases Certificates: IP67, STANAG 4280 (ed. 2), DEF STAN 81-41 (lev. J) Extra options: Compatible with Combination Lock, Suitable for Air Freight Suitable for: Compact Cameras, DSLR, Smaller Electronics, Lenses, Outdoor Explorer Cases Series: 2209 / 2214 Weight empty: 0.88 kg Buoyancy: 2.3 kg -
The Explorer Cases 2209.B is a black transport case with picking foam padding and has inner dimensions of 220 x 160 x 94 mm. The case is indestructible, 100% waterproof and provides complete protection for all your fragile and valuable belongings. Explorer Cases are fully certified and therefore resistant to the harshest conditions and shocks. Is there something wrong with your suitcase? Then you can rely on a lifetime warranty! The case contains a picking foam set, consisting of removable layers of foam. By means of optionally available accessories, you can also equip this Explorer Case with, for example, a combination lock or shoulder kit. - Explorer Cases article: 2209.B - Model: Equipped with picking foam - Color: Black Application Explorer Cases 2209.B The transport case is an ideal tool for safely transporting smaller electronics such as a DSLR or smartphone, but also for all kinds of accessories that you use during outdoor activities, for example. Due to its compact size and light weight, you can safely take the case - with its contents - with you wherever you go. In addition, the 2209 is allowed as carry-on luggage on the plane. The Explorer Case 2209 is also available in orange and green. Do you want this case in that other color, or have you seen another Explorer Case that you can't find with us? Please contact us. Why Explorer Cases Italia? • Lifetime warranty • 100% waterproof, moisture-proof and dustproof • Resistant to chemicals by means of demonstrable certificates • Resistant to hard impacts • Effortless to use at temperatures from -33 to + 90 C° • Allowed as carry-on baggage on the plane • 100% Made in Italy SpecificationsArticle number: 250150 Brand: Explorer Cases Inner dimensions in mm: 220 x 160 x 95mm Outer dimensions in mm: 246 x 215 x 112mm Height of lid: 20 mm Height of bottom: 75 mm Volume in litres: 3,3 Certificates: IP67, STANAG 4280 (ed. 2), DEF STAN 81-41 (lev. J) Extra options: Equipped with Picking Foam, Compatible with Combination Lock, Suitable for Air Freight Suitable for: Compact Cameras, DSLR, Smaller Electronics, Lenses, Outdoor Explorer Cases Series: 2209 / 2214 Weight empty: 0.88 kg Weight with foam: 0.99 kg Buoyancy: 2.3 kg -
With this patented combination lock you can secure your belongings in the suitcases of Explorer Cases. Due to the close fit of the locks, they stay in place and do not come out of the case. -
Not in stock - on order
The CTB Dump Pouch QR is designed to store everything from used rifle magazines to evidence found in the field during amphibious operations. Once closed, it's small enough to be attached to a belt or tactical vest without adding much bulk. Once opened, it can house up to six AR-15 rifle magazines. The opening can be adjusted at will thanks to the elastic cord that runs along it. This pouch is equipped with the DUE EMME Quick Release buckle making it easy to open, especially useful when wearing thick gloves or during night or water operations. The MIL-C-8061 heavy mesh fabric construction effectively wicks away water and debris after a coastal insertia or any kind of water activity, keeping the user light and efficient. The FROG.PRO CTB (Cross The Border) line is specifically designed to provide amphibious special mission units with special equipment that, thanks to special fabrics and specific design choices, improves performance and survivability during operations involving working in wet environments, such as marine, fluvial, rainy or snowy areas. The LAHYCO composite fabric used for the main parts of the bag and flap is highly hydrophobic, which translates into greater mobility and lighter weight in wet environments. The LAHYCO fabric is also partially FR, and offers firmer protection against cutting, wear and tear. Our attention to detail, combined with a personalized design, offer a unique product that reflects our commitment to "state of the art" military equipment. Weight: 175 g Dimensions when closed: 14 x 8 x 5 cm Dimensions opened: 25 x 15 x 10 cm -
Not in stock - on order
The Micro Hand Cuff Key Retractor is the smallest Retractor we build. The Velcro attachment can be worn on a service belt or belt (under the service belt). The Velcro strap takes up minimal strap space. Keys can be put in the bag. -
Not in stock - on order
The GearKeeper RT4-5171 is an extendable safety system with retraction function for small devices up to 170 g, such as flashlights, laser pointers, cutters, scissors, mobile phones, GPS, etc. However, depending on the weight, the drawstring does not prevent the device from falling to the ground when you release it, but it does prevent it from being lost. At the end of the rope is a keychain, which is attached to the end of the rope with a quick release. The rope is made of extremely wear-resistant Spectra nylon. The GearKeeper RT4-5171 has two MOLLE brackets - a plastic MOLLE bracket that can be rotated 360° on the back of the case and a MOLLE-compatible Velcro mount. With the Velcro closure, the GearKeeper can also be attached to loops or straps. The unused mounting option can be removed. Material- Housing: polycarbonate;
- Rope: Spectra nylon,
- Keychain: stainless steel
- Robust polycarbonate housing.
- Extremely wear-resistant drawstring made of Spectra nylon.
- Screw-off plastic MOLLE bracket on the back.
- Removable MOLLE-compatible Velcro mounting loop.
- Stainless steel keychain with quick release.
- Saltwater resistant.
- Retraction force for objects up to approx. 170 g.
- Tensile strength drawstring: approx. 27 kg.
- Rope length: approx. 91 cm
- Housing dimensions: approx. 51 x 41 x 20 mm (H x W x D).
- Weight: approx. 65 g.
- Made in the US.
-
Extendable securing system with retraction function for equipment up to 85 grams, rope length approx. 91 cm, O-ring, removable. The GearKeeper RT2-5830 is ideal for storing keys. Of course, it can also hold other objects weighing up to approx. 85 grams, such as flashlights, laser pointers, scissors, mobile phones, GPS and other equipment with an O-ring. Depending on the weight, the drawstring doesn't prevent the gear from falling to the ground when you let go, but it does prevent loss. The safety lanyard is a nylon-coated stainless steel cable. This model has a detachable holder with O-ring. Predicted breaking point: at a load of about 27 kg. Retraction force: for objects up to approx. 0.085 kg. Rope length: approx. 91 cm Housing: approx. 5 x 3.8 x 1.4 cm (H x W x D) The Gearkeeper is part of the standard equipment of the US Navy Seals. Made in the US. -
Not in stock - on order
The GearKeeper RT4-5170 is a retractable safety system with retraction function for small work tools up to 85 g, such as compass, pocket knife, scissors, etc. However, depending on the weight, the pull rope does not prevent the equipment from falling to the ground if you let go, but loss is prevented. At the end of the rope is a key ring, which is attached to the end of the rope with a quick release. The rope is made of extremely durable Spectra Nylon. The GearKeeper RT4-5170 has two MOLLE holders - a 360° rotatable plastic MOLLE holder on the back of the case and a MOLLE-compatible Velcro option. With the Velcro option, the GearKeeper can also be attached to loops or straps. The mounting option that is not in use can be removed. Material Housing: Polycarbonate; rope: Spectra nylon, keychain: stainless steel Details:- Robust polycarbonate housing.
- Extremely wear-resistant Spectra Nylon drawstring.
- Removable plastic MOLLE attachment on the back.
- Detachable MOLLE-compatible Velcro fastening loop.
- Stainless steel key ring with quick release.
- Resistant to salt water.
- Retraction force for objects up to approx. 85 g.
- Pulling force of the drawstring: approx. 27 kg.
- Drawstring length: approx. 91 cm
- Housing dimensions: approx. 51 x 41 x 20 mm (H x W x D).
- Weight: approx. 64 g.
- Made in the US.
-
Retractable belt system with retraction function for equipment up to 255 grams, rope length approx. 81 cm, key ring. The 360° rotatable GearKeeper RT4-5174 is suitable for objects weighing up to approx. 255 grams, such as a flashlight, radio, mobile phone, GPS, rangefinder and other equipment. Depending on the weight, the tow rope does not prevent the equipment from falling to the ground when you let go, but the loss is prevented. With quick-release buckle at the end of the rope to quickly separate the object from the safety cord. The safety cord is a stainless steel cable sheathed with nylon. Material Case: Polycarbonate; Rope: Spectra Nylon, Keychain: Stainless Steel Breaking point: at approx. 27 kg load. Retraction force: for objects up to approx. 0.255 kg. Cable length: approx. 81 cm Housing: approx. 5 x 4 x 1.5 cm (HxW x D) The Gearkeeper is part of the standard equipment of the US Navy Seals. Made in the US. -
Not in stock - on order
The Coated Ammunition Bag is the ideal companion at the shooting range. The bag offers plenty of space for ammunition and accessories. A separate sleeve pocket for collecting and storing shells is also included. Attributes Ammunition bag- Removable inner compartment
- Inner compartment is attached with Velcro
- U-shaped and lockable zipper
- 3-digit combination lock
- color black with sewn red Co logo
- size approx. 23x14x18 cm
- Closure with drawstring
- Carabiner for attachment to ammunition bag, shooting bag, belt loop
- Mesh-dust bottom (loose dirt in the pods is easily removed by shaking)
- color black
- size approx. 16x13 cm
-
![Helikon-Tex E&E Pouch® [U.03]](https://shop.afullmetaljacket.com/wp-content/uploads/2023/04/MO-U03-CD-ee_pouch_u03_-_cordura-6-1000_1.jpg)
![Helikon-Tex E&E Pouch® [U.03]](https://shop.afullmetaljacket.com/wp-content/uploads/2023/04/mo-u03-cd-11_1.jpg)
A timeless classic based on a revised design by the British Special Forces. This large bag is suitable for survival and bushcraft equipment, water bottles, food rations and the like. At the back is a cover for a folding saw, knife and axe. MOLLE/PALS compatible. Features:- Integrated sleeve for knife/axe/folding saw at the back of the pouch
- Designed in collaboration with Survivaltech.pl
- with buckle
- Internal loop panel, 3 flat pockets and loop for small items with bottom hook &loop
- PALS webbing on front and sides
- Compatible with DUTY BELT/PALS/MOLLE
- Two d-rings for carrying strap (not included)
- Weight [g] 202
- Dimensions 19.5 x 15 x 7 cm / 7.7 x 5.9 x 2.8 in
- Contents [l]2
- Material 100% Nylon
- EUROPEAN PATENT No. 002994368-0001
-
Not in stock - on order
Every-Day Carry is the name for the supplies we carry with us every day. Ideally, they should be as simple as possible, versatile and well thought out. And that's exactly what our EDC backpack is & designed with everyday carrying needs in mind. The backpack has a spacious two-chamber construction. The main room has a smooth interior, without additional compartments or organizers, only with a hanger for the drinking bladder. The front chamber is lined with soft velour velcro fabric, compatible with our Versatile Insert System®, which allows you to personalize your backpack to your liking. The front and sides of the backpack are covered with MOLLE/PALS compatible straps. In addition, there is a large piece of loop velcro for various patches on the front of the backpack. Features:- MOLLE/PALS panels on the side
- Hydration bladder pendant
- Anatomical shoulder straps
- Front chamber lined with velour velcro
- YKK® zippers
- Comfortable handle
- Lap belt
- Shock cord with cord closure
- Comfortable carrying system
- Cordura® 500D
- WooJin® buckle
- Loop panel for personalization
-
Tactical bag for the shooting range or EDC This product has evolved from the Rangemaster Bag but offers much more versatility. Thanks to its sturdy structure, the Mission Bag can not only safely store ammunition and tactical or shooting equipment, but also serves as a large EDC organizer. It has a total of seven compartments, six of which are on the outside. The first compartment is a large, rectangular compartment with a zipper. On the inside, there's a simple organizer on one side, while the other side is lined with a soft Velcro strap for attaching our VIS series inserts. On the left side is a second, square cargo pocket that is lined with soft Velcro, also with zipper. The right side has two open pockets with drawstrings. On the back of the bag is a flat pocket with Velcro. The last external compartment is located on the flap of the bag and offers space for items such as keys. The inside of the bag is lined with a soft Velcro strap, making it fully compatible with inserts from our VIS series. On the inside, there is a divider that you can adjust to your liking. Features- Flap attachment of the bag to the car seat
- bag compatible with the VIS system
- Rubber stabilization pads
-
The new generation of the Raccoon® backpack is based on user feedback and our experiences with this model. The lightweight, yet sturdy backpack with a capacity of 20 liters is an optimal choice for everyday use, but is absolutely sufficient for day trips and tactical operations, where a larger backpack would be an unnecessary burden. Raccoon Mk2 Backpack® has one external compartment, the size of the main compartment. Inside is a simple organizer for carrying extra items. The main compartment has one flat inner compartment and a camelbak holder. For heavy loads, the simple lap belt with webbing distributes the weight well, while the belts allow the load to be shed quickly. The exterior is covered with webbing that is compatible with the MOLLE/PALS system. Shockcord allows attachment of additional equipment such as jackets, sleeping mat, etc. At the bottom are two compression ribbons. Thoroughly redesigned layout, materials used and high quality make Raccoon an ideal backpack for both special ops and EDC. Dimensions hoop panel: 12 x 7.5 cm Attributes- Removable lap belt
- YKK® zippers
- Internal organizer with zipper for cards, markers, flashlights and other accessories
- Transport handle
- PALS/MOLLE system
- Hydration bladder carrier
- 3D Mesh on the back panel and shoulder straps for better breathability
- Shock cord with cord closure
- Vest, adjustable shoulder straps
- Loop panel for personalization
- Side and bottom compression bands
- Mesh inner pocket for small items in main compartment
- Weight [g] 1067
- Storage for small items
- Quickly removable shoulder straps
- Dimensions 45 x 24 x 20 cm / 17.7 x 9.5 x 7.9 in
- Contents [l] 20
- Material 100% Nylon
- EUROPEAN PATENT No.004063428-0002
-
Not in stock - on order
The new generation of our RATEL backpack is not only the result of the feedback from the users, but also from our many years of experience with this model. Lightweight and durable, this over 25l pack is a great choice for 1-2 day patrols or everyday wear. The large main compartment is suitable for any drinking bladder. Two additional external pockets make this backpack spacious enough for all your essentials for almost any mission or hike. MOLLE/PALS webbing on the front and sides give you the option to attach extra pockets, making the backpack fully scalable. Velcro panel on the front makes it possible to easily personalize the backpack. Reinforced back and soft, yet durable and profiled shoulder straps provide comfort even with prolonged use. The removable lap belt provides extra stability and good weight distribution. Features:- YKK® zippers
- WooJin® buckle
- Loop panel
- Durable handle
- Removable lap belt
- Two external handy pockets
- Hydration bladder pendant
- MOLLE/PALS on front and sides
- Reinforced back
- Dimensions: 15 x 29 x 51 cm / 6 x 11.5 x 20 in
- Capacity: 25l
- Material: Nylon
-
Not in stock - on order
Our Expedition Rucksack is behind you on every adventure, so you can comfortably carry the gear you need over any distance you want. We know how important the fit of a backpack is for your safety, which is why this bag has an adjustable back system and hip belt to carry the weight evenly. The Ripstop nylon is strong enough to withstand bumps and scrapes when you clamber over rocks or drop your backpack at the camp after a long walk. It's easy to keep your stuff organized, with a bivi divider for the main compartment and enough compartments to keep all your essentials handy. Ideal for expeditions, as the name suggests, the Expedition Rucksack is a versatile and supportive backpack for long treks. Attributes SUPPORTIVE: An adjustable back system, chest strap and hip belt distributes the weight of your backpack evenly over your body and relieves your back. STAY DRY: The nylon fabric is good against showers, but if you end up in a downpour, the integrated rain cover ensures excellent waterproofing of your gear. EXTRA SPACE:Even if you're heavily packed for each trip, the Expedition can accommodate all your gear in the main compartment, the compartments on all sides, and the mounting loops on the outside of the bag.- Size: 65L
- Material: 210D ripstop nylon
- Dimensions: 66 x 38 x 11cm
- Pockets: Padded front, bellows side, stretch side, hip belt, inner and outer lid
- Back system adjustable
- Padded lap belt
- Access lid and bottom
- Capacity 65 litres
- Rain Cover Integrated
- Pole parking: Yes
- Attachment points: Openwork loops and lid-mounted straps
-
Not in stock - on order
Very versatile and durable bag for weapons and sniper rifles with a length of up to approx. 120 cm. The weapon is secured by Velcro and cannot slide. Other accessories can also be attached in the velcro pocket, alternatively, three external pockets for accessories of all kinds. The bag is very well protected. There are also no sharp edges or zippers in the interior space, so the weapon cannot be scratched. -
- 1x Adaptive Rig System Split Rig setup with Tango modules
- 1x ARS butt pack
- 2x Grand GP
- 2x Double mag pouch
- 1x L4P x EURMED IFAK insert
-
The PUZZLE is the most modular breast harness on the market. You can attach molle pouches together and customize the chest harness according to the mission needs. pouches can be attached on both sides. The included Adaptive Rig System Bravo module (yoke/harness) is highly adjustable and compatible with most aftermarket chest rigs, including our Adaptive Rig System and the PUZZLE series. This package contains all the parts needed for chest rig constructions from wide rigs to micro rigs and split front rigs. Just add pouches. 2024 Upgrade: Split Bar Tube Compatibility Popular add-ons for PUZZLE builds include Zipper modules and our Molle to Velcro Adapter which allows you to build placards and can be used to add dangler compatibility to a PUZZLE setup. -
Made of X-Pac - a high-quality light, durable, highly abrasion-resistant, tear-resistant, waterproof with aramid reinforced Cordura material. NIR compliant. DWR. Weight 313 g Ultra-light chest harness with fixed pocket. 4 double mag pouches for two each 5.56 or 7.62x39. Two large GP pockets and MBITR/nalgene pockets behind GP pockets. Upgrade your ULWCSIG with our Adaptive Rig System Bravo yoke, L4 x EURMED IFAK insert, TQ pocket and frag pockets. Content for illustrative purposes only, NOT included! -
Not in stock - on order
The LT561Curv® belt Cobra is a stiffened modular belt that ushers in the next generation of Warbelts from Lindnerhof. He goes beyond the boundaries of the material The Lindnerhof-Taktik LT562 Curv® Belt Cobra is the latest innovation born from the tireless pursuit to develop new and better materials, fabrics and products. The LT562 Curv® is inspired by proven automotive materials. Curv® made of a polypropylene base material covered with a 500 denier layer of CORDURA® coating. It meets all the requirements for tactical use: extremely low weight, high impact resistance, remarkable flexibility and exceptional breaking strength, even at very cold temperatures. The weight belongs to the equipment, not to the belt Thanks to its rigid material properties, the LT562 Curv® does not require any additional reinforcement. In addition, the LT562 Curv® is laser-cut so you can attach your pouches and equipment directly to the MOLLE slots. The anatomical shape improves the fit and increases the wearing comfort of this belt. On the inside of the LT562 Curv® is an integrated hook strap that allows you to easily wear it over an LT465 Lindnerhof belt. For a reliable and secure attachment, the LT562 Curv® is equipped with the well-known Cobra buckle (depending on the user's need or preference, the strap can be fine-tuned) Features- Made of 100% polypropylene Curv® material
- Non-woven compression molded (for better performance compared to conventional polypropylene films)
- Extremely flexible
- Amazing shock resistance
- Shatterproof (even at very cold temperatures)
- Laser-cut design (MOLLE/PALS compatible)
- Anatomically shaped
- Upholstered in 500 den CORDURA® fabric
- Internal hook strap for attachment to the lower strap
- Adjustable in length
- Cobra buckle
-
Not in stock - on order
The LT468 belt is the narrower version of the classic LT465 belt from Lindnerhof. Instead of 50 mm, it is 35 mm wide and therefore fits in many different models of combat pants and also in most civilian pants. Use & Closure In addition to being used as a normal belt, it can also be used as an inner belt with modular belts, such as the LT562. Thanks to the fleece surface, modular straps can be fastened. This means that the equipment always stays in the same place. This also significantly increases the wearing comfort. Integrated reinforcement and fastening system The internal reinforcement also distributes the weight and increases stability. The ergonomic design also contributes to this. To close the bag, the loose end of the end of the otherwise sewn fleece strap is threaded through a flat square ring and thus ensures a flat and infinitely adjustable closure option. Key features- 35 mm wide
- Sewn-on loop strap for attaching modular straps
- Integrated amplification
- Ergonomic shape
-
Not in stock - on order
Compact and padded, the Modular Micro Rig MX887 offers maximum freedom of movement and is ideal for operations where ballistic protection is not required. It makes it easier to carry backpacks, rifles, etc., on your back or allows you to quickly load magazines over a vest or plate carrier. Key features- Micro-Rig based on the Panel MX231 and the padded harness MX732
- Made of ultra-light multiaxial MX laminate
- Features standard laser-cut MOLLE slots on the front and on the shoulder straps for attaching your gear
- Padded and size-adjustable harness
- Equipped with 4 back-to-back loops for cable management
- Multi-Axis Laminate MX
-
Not in stock - on order
Compact and padded, the Lindnerhof Micro Rig Set Multicaliber MX886 offers maximum freedom of movement and is ideal for operations that do not require ballistic protection. It makes it easier to carry backpacks, rifles, etc., on the back or allows for quick loading of magazines over a protective vest or plate carrier. 1 Panel for different warehouses The 3 permanently installed multi-calibre pouches adapt perfectly to the size of the magazine and are therefore suitable for different rifle magazines - from narrow AR15 magazines from sheet steel to bulky HK417 magazines. One of its key features is the freely movable L-bracket design, which makes it possible to the base and the side walls to the used magazine. In addition, the pouch has an adjustable tensile resistance when removing the magazine thanks to the all-round elastics with cord stopper Your warehouses safely stored The MX886 has a detachable rubber lanyard with Alpha Tab to secure the magazine. This allows you to reach your warehouse quickly, even with wet hands or gloves. Additional MOLLE slots and back-to-back loops On the front of the multi-caliber pouches and on the shoulder strap, you'll find MOLLE laser cuts for attaching additional gear. The shoulder straps are also equipped with Two back-to-back loops on each side to make it easier to organize cables, drinking hoses, etc. Expandable with Velcro With the help of our hook-and-loop pockets, you can easily expand your set-up and carry extra gear with you. The MX174 and LT373 multi-bags, the MX634 radio cover, the LT241 turnstile holder or the LT104 magazine bag. Rapid adaptation to changing hazardous situations By throwing the Micro Rig over the plate carrier or protective vest, you can always adapt to changing working conditions in seconds. Alternatively, the Micro Rig panel can also be quickly and easily attached to a plate carrier. All you have to do is remove the velcro on the back and the straps and attach the panel directly to the fleece surface of the plate carrier. The kit also includes 2 click-it MOLLE adapters that can be attached to the MOLLE slots of the plate carrier Product description- Micro setup based on the MX234 multi-caliber panel and the MX732 padded support frame
- Made of ultra-light MX multiaxial laminate
- 3 permanently installed multi-calibre magazines
- Suitable for a variety of rifle magazines - from AR15 to HK417 magazines
- Optimal adaptation of the base and side walls to the magazine thanks to L-bracket construction
- Adjustable tensile resistance thanks to circumferential rubber cord with cord lock
- Magazine secured by rubber cord with Alpha Tab
- Standard MOLLE laser cuts on the front and shoulder straps to attach additional gear
- Padded and size-adjustable carrying system
- 4 back-to-back loops for cable routing
- Front panel multicalibre 3 MX234
- Breastplate MX732
- Breastplate adapter LT266
-
The LT042/2 plate carrier is a modern, multi-purpose plate carrier made of CORDURA® Advanced Fabric and webbing - a tried and tested combination of materials. Advanced Fabric and webbing - a tried and tested combination of materials. A reliable partner for transporting your sheets and equipment The LT042/2 plate carrier is the second generation of the LT042 model. Like its predecessor, the LT042/2 is based on a well-thought-out design and made from an intelligent mix of proven materials, including the new MX multiaxial laminate in the shoulder and hip straps. The straps on the front and rear of the carrier have been reduced from 25mm to 20mm to save more weight without compromising stability. And as with the LT042, all MOLLE/PALS compatible pouches can be attached. Light or heavy load, the LT042/2 carries your decision with it With the help of the zippers on the back, you can quickly, easily and silently attach modular zipper panels from Lindnerhof and even attach a Lindnerhof backpack if necessary. The zippers are compatible with most systems from other manufacturers (e.g. Crye). A large Velcro pad on the front of the carrier allows modular panels and breasts to be securely attached. The Velcro fasteners on the inside of the carrier allow you to add extra pockets and padding e.g. the Lindnerhof internal padding (dragon shape or LT250), Velcro® side pockets (HL175, MX634) and Velcro® back pockets (MX174, LT104). Together, they make the LT042/2 – a smart solution for storing gear, whether you want to carry light or heavy luggage, breaker tools or extra gear for your mission. Cable Management - Hidden & Custom On the front panel of the LT042/2 there are three consecutive cable attachments. You can attach cables or a drinking tube to this. Longer Cables can also be routed directly through the plate compartment via three user-separable closing seams on the sides and at the top of the plate compartment (For example, if you cut open one of the seams in the middle, you can route the radio cable coming from a hip radio from a hip-mounted radio to the headset). On and off in the blink of an eye Our patented hook buckle is a classic quick-release system that is also designed to be quick, easy, silent, and in different directions as needed. The LT042/2 comes with our extra narrow 25mm hook buckles for the shoulder strap. They are so narrow that they won't interfere with your weapon system, but are just as secure and stable as conventional hook buckles. Panels of different sizes fit in one compartment The plate compartment of the LT042 is designed for an SAPI L plate. Thanks to the integrated plate holder belt, you can also use smaller plates (SAPI M or NATO standard 25x30 cm) be attached. Product Details:- Fully modular plate carrier
- Standard MOLLE/PALS fabric, full front and back
- Shoulder straps and skeletonized, double 3-row hip belt made of multiaxial MXLaminate
- Loops for cable routing
- Patch Areas
- MOLLE slots on the shoulder straps (for cable management and turnstiles; length adjustment possible via Velcro)
- Extra slim, patented 25 mm hook buckle on the shoulder straps
- Loops on the shoulder straps, compatible with Lindnerhof tactical backpacks (HL334 Modular Backpack System 10L)
- Zippered pockets (Crye compatible)
- 20-row belt (fastening with elastic cord on the back)
- Shoulder straps size M
- SAPI L plate size (and SAPI M or NATO standard by using the plate plate mounting strap)
- Separable bar seams for cable routing
- Additional equipment: LT250 inner lining, HL175 Velcro® side pocket, HL105 shoulder pad, HL334 backpack, LT632 zipper panel
- L (SAPI)
- 1 front piece
- 1 back panel
- 1 pair of shoulder straps (size M)
- 1 skeleton waist belt (3 rows)
- 1 elastic cord (3 mm)
- 1 elastic cord (5 mm)
- Cord stopper
-
The MX042 plate carrier is the MX version of the well-known LT042/II plate carrier. It is fully MOLLE/PALS compatible thanks to laser cuts on the front and back. The Multiaxial laminate not only reduces weight, but also reduces water absorption compared to webbing sheet carriers. Quick to detach and attach It is equipped with our patented hook buckle on the shoulder and waist straps. This allows the plate carrier to be lowered in seconds, whether it is an injury, a fall into the water, or a change in the hazard or operational situation. A strong tug in any direction will suffice. It can be removed quickly. Integrated admin tray The plate carrier has an integrated administrative pocket under the fleece surface on the front. The inside of the bag is equipped with elastic loops for sorting and and attachment of smaller attachments. Compatible with a variety of plate sizes The MX042 plate carrier is available in sizes M and L, each suitable for the plate sizes SAPI M and SAPI L. The plate is inserted from below and held firmly in place by the plate carrier. The plate is inserted from below and held firmly in place by the plate attachment strap. Smaller or specially shaped plates (e.g. Swimmers Cut) are also held firmly in the correct position with the help of the fastening strap. Additional Velcro pockets (e.g. MX174, LT112, LT104) can be attached to the Velcro fastener of the plate. An extra strap makes it easier to open the record compartment. Easy waist belt adjustment The three-row skeletonized waist belt can be individually adjusted, even when secured thanks to a lacing system and a cord stopper. Two different cord thicknesses are included in the scope of delivery. These offer varying levels of resistance and flexibility to adapt to needs and changing clothing under the plate carrier (jacket vs. field shirt). Narrow shoulder strap The shoulder strap of the plate carrier can be adjusted with a Velcro fastener, allowing adjustment even when the carrier is on. The narrow 25 mm Hook buckle on the shoulder straps provides the user with more space for attaching a shoulder rest. There are also MOLLE/PALS slots on the shoulder strap, which can be used for cable management or attaching additional pockets. Fleece surfaces inside and outside Patches can be attached to the fleece panels at the top of the front and back for personalisation and labelling. In addition fleece panels on the inside of the plate carrier for attaching padding (e.g. LT250) or additional pockets (e.g. MX634 radio bag or LT241 turnstile holder). Quick to set up and convert Our MX042 plate carrier can be quickly and flexibly adapted to different situations and tasks. It has a large fleece surface on the front for front panels (MX231 & MX234), which can be fastened with a buckle or via a Velcro loop. Alternatively, breastplate (e.g. MX266) or micro rigs (MX886/MX887) can also be attached here. Furthermore, the plate carrier is compatible with LHT backpacks thanks to loops on the waist and shoulder strap. Zipper panels (LT632 and LT400/II) can be quickly and easily attached to the zippers on the back. Intelligent cable management The MX042 plate carrier provides an intelligent cable management system that enables the organized routing of cables and drinking tubes. Thanks to the Seams, which can be opened at the front and back, can be routed cables through the plate compartments. This means that the cables do not protrude and Damage or obstructions, e.g. when changing magazines, are avoided. The front section also has back-to-back loops for cable routing Product Details- Fully modular panel carrier
- Made of ultra-light MX multi-axis laminate
- Standard MOLLE laser cuts on the entire front and back
- 3 back-to-back loops on the front for organized cable management
- Divisible bar seams for cable routing
- Zippers on the back for attaching zipper panels (CP compatible)
- - Velcro fleece surface on the front and back
- Fleece panels with Velcro on the inside
- Size M shoulder straps with slim, patented 25mm hook buckle
- MOLLE slots on the shoulder straps (for cable management and extra pockets; length adjustment possible with Velcro fleece closure)
- Loops on the shoulder and sternum straps compatible with Lindnerhof Taktik backpacks (e.g. HL334 backpack)
- Skeleton waist belt: 3-row with 10 MOLLE slots each
- Hip belt with patented hook buckle
- Size adjustment with elastic cord
- SAPI L plate size (and SAPI M or NATO standard by using the plate belt)
- Attachment of a breastplate (e.g. MX266 + RMPL144) possible
- Multi-Axis Laminate MX
- Approx. 700g
- 1 front part
- 1 back panel
- 1 pair of shoulder straps (size M)
- 1 waist belt (3-row with 10 MOLLE slots each)
- 1 elastic cord (3mm)
- 1 elastic cord (5mm)
- 1 cord stopper
