- Web, MOLLE, belt, and SlickStick compatible
- Double elastic pull-through opening
- Zippered main compartment for easy refilling
- Interior zipper guards prevent catching
- Durable Duraflex® fittings
- Water-resistant coating
- 1050D tear resistant nylon construction
- 4.5" H x 3"L x 1.75" D main compartment (11.5cm*7.6cm*4.5cm)
- 24 cubic inches total capacity
- Preformed tractors on all zippers
- Self-healing YKK® zippers
- Real Prym® snaps
-
The perfect accessory for patrol, paramedic or crime scene, thanks to our fast and reliable Disposable Gloves Pouch you have fresh gloves at your fingertips. Fully compatible with web and belt strap fasteners, as well as 5.11® SlickStick® and Stay Secure Snap Systems, the Disposable Glove Bag is lightweight, durable and water resistant. Features include a double elastic opening to insulate your clean gloves from dirt and moisture, a zipper protection on the inside to prevent the zipper from sticking to wrapped gloves, and a Easily accessible full zipper opening for changing empty boxes. Whether you're on patrol, detective, or EMS, the Glove Pouch from 5.11 Tactical® is an invaluable accessory. SPECIFICATIONS: -
The Range Master Bucket Bag from 5.11 Tactical is made of durable nylon and can be closed with a cord lock. The Range Master Bucket Bag is ideal for carrying loose ammunition or suitcases. Material Outdoor material 1: 100% polyester 500D; Outer material 2: 100% polyester Details:- Stackable bag design.
- Closure with drawstring.
- Stable handle.
- Wear-resistant floor with reinforcement.
- Velcro for ID patch.
- Capacity: 4 litres.
- Dimensions: ong. 20 x 10 x 10 cm.
- Weight: about 165.
-
A plate which can be mounted instead of one of the plates on our dual side covert harness. On this plate, a pistol holster or any other pouch in our sortiment can be attached. -
Laser-cut elastic turnstile holder from Warrior Assault Systems for storing a C.A.T. turnstile. The Laser Cut Elasticated Tourniquet Holder is primarily intended for C.A.T. Turnstiles developed, but also fits on an S.O.F.T. Tourniquet, which is tight in the holder. The laser-cut material is made of high-quality composite laminate material. All threads are resistant to powdery mildew, UV light, water, heat and cold. All materials used have the lowest infrared values (99.8%) and are manufactured in the US according to US military specifications. material 500D Cordura®-nylon Details:- One-handed operation.
- Elastic bands on the side for compression and a secure grip.
- Closing flap with Velcro and reinforced finger loop.
- Laser-cut PALS mounting loop for MOLLE system (25 mm).
- IRR coating to reduce IR signature.
- Dimensions: approx. 11.5 x 4.5 x 3.8 cm.
- Weight: approx. 30 g.
-
Not in stock - on order
The Coated Ammunition Bag is the ideal companion at the shooting range. The bag offers plenty of space for ammunition and accessories. A separate sleeve pocket for collecting and storing shells is also included. Attributes Ammunition bag- Removable inner compartment
- Inner compartment is attached with Velcro
- U-shaped and lockable zipper
- 3-digit combination lock
- color black with sewn red Co logo
- size approx. 23x14x18 cm
- Closure with drawstring
- Carabiner for attachment to ammunition bag, shooting bag, belt loop
- Mesh-dust bottom (loose dirt in the pods is easily removed by shaking)
- color black
- size approx. 16x13 cm
-
The Magpul DAKA Pouch is designed to bring organization to the dusty, dirty and muddy world in which we work and play. The small Magpul DAKA Pouch is made of polymer reinforced textile with welded seams and real YKK® water resistant zippers. Our construction methods and the materials we use mean that these bags are at home in heavy-duty applications, such as organizing tools and bulk storage of reloaded ammo, or lighter tasks, such as organizing your personal electronic accessories. While they're not meant to be submerged, these water-resistant bags keep your stuff dry in most wet environments, making them an excellent choice for most outdoor adventures. REINFORCED POLYMER FABRIC WITH ANTI-SLIP TEXTURE Our unique polymer-reinforced material protects your belongings from exposure, moisture and loss. WELDED CONSTRUCTION AND YKK AQUAGUARD® ZIPPER Impermeable seals on all sides and a water-repellent zipper ensure safe, environmentally friendly storage. 550 PARACORD & HEAT SHRINK TUBING FOR BETTER GRIP Sturdy but easy to open and close zipper Technical specifications- Zipper length 5.75"
- External width 9"
- External length 6"
-
Not in stock - on order
The latest addition to our popular DAKA line, the small Magpul DAKA Lite Pouch is designed to be lightweight and highly packable while retaining the strengths of our original DAKA pouches. Made from a lighter, more flexible nylon material, the DAKA Lite line is intended for use where you need flexibility and weight savings over a more structured storage solution. Designed to carry everything from electronics to emergency equipment, the small DAKA Lite Pouch is easy to pack into larger storage units such as your daypack, hunting bag or travel duffel. The versatile design makes the DAKA Lite Pouch perfect for backpacking, camping, biking, hunting, and lightweight vehicle organization. The RF welded seams of the 70D TPU-coated nylon keep the weight low without losing strength. The Magpul embossed injection molded zipper pull is easy to find and manipulate, and carabiner attachment points make securing the case simple and effective. The DAKA Lite Pouch is an essential piece of equipment when weight saving is important for your success. NEW, LIGHTER AND MORE FLEXIBLE STORAGE MATERIAL Lightweight and extremely packable Made of 70D TPU-coated nylon Strong RF welded construction that creates permanent, impermeable seals Technical specifications- Weight: 20 grams
- Zipper length 6 in.
- External height 6 in.
- External width 9 in.
-
Extendable securing system with retraction function for equipment up to 85 grams, rope length approx. 91 cm, O-ring, removable. The GearKeeper RT2-5830 is ideal for storing keys. Of course, it can also hold other objects weighing up to approx. 85 grams, such as flashlights, laser pointers, scissors, mobile phones, GPS and other equipment with an O-ring. Depending on the weight, the drawstring doesn't prevent the gear from falling to the ground when you let go, but it does prevent loss. The safety lanyard is a nylon-coated stainless steel cable. This model has a detachable holder with O-ring. Predicted breaking point: at a load of about 27 kg. Retraction force: for objects up to approx. 0.085 kg. Rope length: approx. 91 cm Housing: approx. 5 x 3.8 x 1.4 cm (H x W x D) The Gearkeeper is part of the standard equipment of the US Navy Seals. Made in the US. -
Designed to seamlessly connect to 5.11 ® bags, packs, and duffels, the 6.6 Pouch provides lightweight all-weather storage for any application. Made of ultra-durable N500D nylon, and featuring a YKK ® zipper with a preformed handle for glove-friendly accessibility, the 6.6 Pouch is compatible with MOLLE and 5.11 ® SlickStick® web platforms for easy integration into your existing equipment. SPECIFICATIONS:- Multifunctional all-weather storage
- Can be integrated with 5.11® bags, packs and duffels
- MOLLE / SlickStick web platform compatible
- Molded handle for accessibility with gloves
- N500D body
- 6" H, 6" W, 3" D - 15.2 x 15.2 x 8.9 cm
-
The 5.11® H20 carrier has the dimensions of a standard water bottle and integrates with MOLLE and 5.11 SlickStick® web platforms, providing an ideal hydration solution for both tactical and recreational environments. The bags can therefore be attached very flexibly to equipment vests, backpacks or belts. Compatible with the following modular systems such as Paraclete, S.T.R.I.K.E, TT-MTS, 75 Tactical. Dimensions- Provides 7 1/2" H, 4 1/8" diameter storage space for your hydration source
- Integrates with 5.11® bags, belts and packs
- Universal compatibility with web platforms
- High impact lock clip
- N500D
- Imported
- Size: approx. L10xB8xH20 cm.
-
HORIZONTAL POUCH S
The Savotta Horizontal Pocket S is a simple and practical pocket with a capacity of one litre. The bag is sealed with a two-way spray water-resistant reverse zipper with tractors at each end to facilitate the use of the bag. The pocket is durable thanks to the durable PUR-coated 1000d Cordura material and the bottom of the pocket is equipped with a metal drain ring. The interior of the horizontal pocket is undivided, which means that larger devices fit in easily and is easily accessible from outside the backpack. The horizontal compartment in S-size can be used as an extra compartment for small Jääkäri products, but thanks to its compact size can also be attached to the back of a backpack. The smallest horizontal compartment is an ideal choice if you need a simple and compact compartment for supplies. TECHNICAL SPECIFICATIONS: External dimensions: Height: 11 cm, width: 20 cm, depth: 5 cm Bag content closed: 1 l Material: PUR-coated 1000D Cordura PALS attachment: height 2, width 4, fastenings 2 pieces 24 cm Weight: 100 grams Colour: olive green and black Warranty: The product has a 2-year warranty for material and manufacturing defects. KEY FLAG PRODUCT: This is a Finnish Key Flag product, which means that more than 50% of the production work is carried out in Finland. Some of the work is outsourced from our factory in Estonia. -
RAIN COVER S A good waterproof rain cover for smaller day backpacks (up to about 20 liters), such as the Jääkäri S. Made of strong and waterproof PU-coated 70D polyamide ripstop material. A strong, adjustable elastic cord runs along the edge of the cover and ensures a good fit over packages of different sizes. The elastic cord can also be used to store the cover when not in use - simply roll up the cover into a tight beam and use the cord loop to secure it. For small backpacks with added side pockets we recommend the larger rain cover M. TECHNICAL DETAILS: Material: 70D polyamide ripstop, with PU coating Colour: olive green Weight: 80 grams Compatible with: Jääkäri S and similar backpacks of 15-20 liters WARRANTY AND WARRANTY: The product has a 1-year warranty for material and manufacturing defects. FINNISH KEY FLAG PRODUCT: All our tents and backpack frames are made in Karstula, Finland. Textile sewing is done in both our factories in Finland and Estonia. All our products have been awarded the Finnish Key Flag symbol, a feature of Finnish production. -
Not in stock - on order
A tighter General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. Velcro openable bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy fold back system on the back of the pouch. This makes it possible to attach the pouch without removing other pouches from the belt. Weight: 40 g Dimensions: H = 13 cm, W = 4 cm, D = 3 cm Fits: Pistol magazine, short flash lights, multi tools etc. Fits on: Equipment vest, belt, leg plate or leg attachment -
Not in stock - on order
Tactical pouch with flap for a 21" baton with the ability to store the ejected baton. Depending on the context, the top flap of the pouch may be placed differently. CHARACTERIZE:- Top holding flap with loop to grip
- Small flap at the bottom for storing the opened baton
- MOLLE fastening system
- Stackable bag with MOLLE loops at the top
- Fastening strap to secure the stick
- 500D nylon
- Dimensions: 21.6 x 3.8 x 2.5 cm
- Weight: 70 g
- Color: black (019)
-
KEY FEATURES- The case is designed to be as lightweight and take up as little space as possible, while remaining strong enough for military use.
- Velcro closed flap with pull tab on the flap for easy opening even with gloves on.
- Velcro loop on the lid for a small patch.
- The flap can be pushed into the pocket for easier access to the thing you're carrying in the pouch.
- Elastic cord, on the pouch to hold the contents even when the valve is open. The cord can be removed.
- Bottom drain hole.
- Fold back fastening system makes it possible to attach the bag to any equipment, vest or belt.
- It has Velcro straps on the back so that it can be worn horizontally on the belt.
- CAT turnstile
- long 40 mm grenades
- Pepper spray
- Mobile phone
- Lamps
- Multi-tool
- Other objects of similar size
- 21-01855A01-013 Black
- 21-01855A09-013 Grey
- 100% Nylon -FR PU coated
- All fabrics and webbings are IRR compliant.
-
The belt to use for carrying something heavy- Reinforced with a semi rigid plastic sheet
- It supports the load, does not twist or sag and remains comfortable
- Adjustable from 84cm to 110 cm waist
- Swivel buckle and Velcro adjustment
- Channel for cable ties
Fits in: All pouches, holsters and drop leg holdersFits on: Most bodiesWeight: 90 gDimensions: 84- 110 cm -
A very comfortable, flexible, quickly accessible and safe carrying system for your weapon With vest attachment on the vest, the weapon can be worn on the vest with this single point attachment. You avoid the uncomfortable load of your neck that you get from a regular rifle slinger. Weight: 90g Dimensions: 4 x 40 cm Fits in: Most weapons in 7.62 or 5.56 mm Beware: In the vest attachment (RSWA-09) -
Not in stock - on order
With the AMAP III Conversion Kit you can attach the Agilite AMAP III and other Agilite accessories directly to ANY plate carrier. Agilite-plate carriers are already equipped with the K-Series fastening system that allows you to attach assault packs directly. However, if your department or military unit requires a non-Agilite carrier, the conversion kit can be retrofitted in minutes and makes any plate carrier compatible with Agilite attack suits or hydration systems. After installation, you can put on and take off your Assault pack in seconds. The Conversion Kit is very unobtrusive, so it can be permanently applied to your back carrier or quickly removed when you are not using it. Why would I want to attach my attack pack directly to my plate carrier? By attaching your assault pack directly to your Plate Carrier, you'll be with one grip on your gear and survival system, whether it's out of your cage, your vehicle or from under your bed. When you need to get the HELO or when you're facing a bad guy, you have your Plate Carrier, armor, ammo, helmet, eye protection, supplies, etc. in one graspable unit, reducing your reaction time. It also means that in a firefight, you don't have shoulder pads on shoulder pads, all of which move independently of each other and unnecessarily swell your shoulders and forecloth. All your gear works as 1 unit, and does not hinder your rifle or head manipulation. Details- This allows you to attach the AMAPIII assault pack directly to ANY plate carrier with MOLLE (not just Agilite plate carriers), in seconds
- Consists of 1 central attachment and 2 connecting buckles
- Can be quickly and easily installed on or removed from any plate carrier
- Once installed, you can turn AMAP III on and off in seconds
- Equipped with loop/buckle attachment points to make the wearer Agilite-compatible
- 1 size
- Fits any plate carrier with at least 2 rows of 4 horizontal MOLLE loops (or more)
- Height: 30cm (11.8")
- Width: 15cm
- Depth: 8mm
- 500 Denier Mil Spec Tactical Nylon
- Mil Spec Plastic Hardware
- Fits any plate carrier with 6 horizontal MOLLE loops (or more)
-
The Magpul QD Paraclip Adapter fits QD push-button gland bushings for use with Paraclips and other clip-on webbing mounts. Made of precision cast Melonite™ steel. Features- QD Adapter
- Optimized shape to prevent the belt from flipping
- Easy to use with gloves
- Made of steel with Melonite™ coating
- Made in the USA
-
The tie-down strap that attaches to our 90-130 liter backpacks and connects the long spoon to the double spoon garage on the combat belt. This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. The outer compartment of the double spoon garage 2.0 connects to the backpack with the curved long spoon, which is placed in the adjustable spoon sleeve. *Atmospheric photos and additional material for illustrative purposes only. Not included in the package. -
The Snigel GP Pouch 3 2.0 has a removable elastic cord and a pull tab to facilitate use. A light pouch for general use to store small objects. The pouch is designed to be light and take up as little space as possible, while remaining strong enough for military use. Elastic band on the pouch to keep the contents safe even when the valve is open. Pull tab on the flap to open it easily, even with gloves on. Velcro flap and pull tab for easy opening The flap can be slid into the pouch and secured with Velcro, making it easier to access the items you carry in the case. Drain hole at the bottom. Thanks to the folding system, the pouch can be attached to any vest or belt. The bag has foldable Velcro straps at the back so that the bag can be worn horizontally on the belt. To wear it vertically, use the quiet and easy-to-use fold back system on the back of the case. This system makes it possible to attach the pouch without removing other pouches from the belt. Capacity: 0,2L Fits: Pepper spray short, short wide flash bulbs, distraction grenades, 40mm grenades, GPS, cell phone Fits: Equipment vest, belt, leg plate or leg mount. -
The Condor Micro Dump Pouch is a rollable universal pouch for empty mags, shotgun shells or other utensils. Suitable for 8 pieces of 5.56 NATO STANAG mags. Material 100% Polyester. data:- Small to fold.
- Large opening with elastic drawstring and pull stoppers for adjusting the width.
- Mesh bottom.
- 2 removable PALS fasteners for the MOLLE system (25 mm).
- Dimensions folded: 10 x 10 x 4 cm.
- Dimensions open: approx. 27 x 25 cm.
- Weight: approx. 140 g.
-
Not in stock - on order
The Micro Hand Cuff Key Retractor is the smallest Retractor we build. The Velcro attachment can be worn on a service belt or belt (under the service belt). The Velcro strap takes up minimal strap space. Keys can be put in the bag. -
Not in stock - on order
ASG Dan Wesson Soft Bag Grey A stylish bag for the Dan Wesson series! Details:- Made of 600D nylon
- Fits all Dan Wesson replicas, even with optics!
- Separate compartment for the replica, with Velcro closure
- 3 mesh bags for exra ammunition or CO2 cartridges
- Elastic loops for 6 speedloaders
- Foam padding protects the replica
- Nice license on the front
- Ultimate carrying bag for the Dan Wesson owners!
-
Not in stock - on order
A padded pouch with drawstring closure. Thick fleece on the inside for protection. Can be used to store sensitive equipment such as night vision goggles. Fits in our Small Oyster pouch.- Weight: 38 g
- Dimensions: 23 x 17 x 2 cm
-
This Abbey waist bag Turnpike with a capacity of 3 liters is ideal as a travel partner. The anatomically shaped hip straps ensure that there is no irritation when you wear the waist bag for a longer period of time. The waist bag is perfectly adjustable thanks to the adjustable hip belt. The waist bag has a main compartment with an extra inner compartment and a 3D flip over, so that another compartment appears. Furthermore, the Abbey waist bag has a small front pocket, two small side pockets and another mesh pocket on the side where a bottle can be placed. Resistant to the first raindrops, because the fabric is treated with a water-repellent coating. TIP: the Abbey Turnpike is very nice to combine with the other bags from the Active Outdoor series! Features:- water-repellent 800 mm PU coating
- reflective details
- anatomically shaped waistband, adjustable on two sides
- various small pockets with zipper in the waistband
- 3D flipchart with zipper
- zipped pocket under the flipchart pocket
- mesh side pockets
- capacity approx. 3 litres
- Size approx. 25 x 16 x 10 cm
-
Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties- Three sizes: 10×15, 15×20 and 20×30 cm
- Translucent mesh material
- Zipper from corner to corner
- Two 25 mm wide webbing loops in the corners
- Color options for easy recognition
- Velcro fastener (hook back) or plain (stand-alone)
- 5-year material and manufacturing warranty
- Made in Finland/Estonia
- Weight: - Hook back 10×15 cm: 37 g - Hook back 15×20 cm: 64 g - Hook back 20×30 cm: 90 g
- Main material: 100% polyester
- Webbing: 100% polyester
-
The webbing sleeve that attaches in the Squeeze vest/plate carrier to connect the long spoon to the spoon garage on the combat belt. Weight:30 g Dimensions: 22 x 5 x 1 cm *Additional equipment for illustrative purposes only. Not included. -
Not in stock - on order
With the quick-release fastener set, you can put on and take off your record in a matter of seconds.- Donning and doffing in seconds
- 1-hand operation
- Self-cleaning ports
-
Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties- Three sizes: 10×15, 15×20 and 20×30 cm
- Translucent mesh material
- Zipper from corner to corner
- Two 25 mm wide webbing loops in the corners
- Color options for easy recognition
- Velcro fastener (hook back) or plain (stand-alone)
- 5-year material and manufacturing warranty
- Made in Finland/Estonia
- Weight: - Standalone 10×15 cm: 32 g - Standalone 15×20 cm: 54 g - Standalone 20×30 cm: 76 g
- Main material: 100% polyester
- Webbing: 100% polyester
-
Keeping your various little trinkets neatly organized in your backpack or purse really makes life easier, our Trinket Pouches are made to do just that. As the name implies, the Trinket Pouches are suitable for all those small things: electronics, tools, first aid kits, personal hygiene items, socks and underwear and all kinds of trinkets that you often have to have with you and want to keep neatly organized. In addition to suits and bags, these are also suitable for storing and organizing various items in the house, in your car or simply in the pockets of your clothes. OPTIONS FOR DIFFERENT NEEDS Standalone: These "regular" ones (without Velcro on the back) are designed for use as they are, stored in your backpack, bag, pocket, glove compartment or wherever you need them. The webbing loops in the corners can be used to attach carabiners or buckles or tie dummy cords to attach the pouch to yourself or your bag. Hook Back: These are quick to attach and detachable to and from backpacks, bags or other looped surfaces. Moving your ready-made trinket bags from one bag or package to another will keep your essentials organized just as neatly, wherever you wear them. Trinket bags with hook backing come with accompanying pieces of loop to cover the hook when not in use, so you can also use it in "standalone" mode. The color options help you color-code your gear for quick and easy recognition. Tip: black is the most "transparent" color. General properties- Three sizes: 10×15, 15×20 and 20×30 cm
- Translucent mesh material
- Zipper from corner to corner
- Two 25 mm wide webbing loops in the corners
- Color options for easy recognition
- Velcro fastener (hook back) or plain (stand-alone)
- 5-year material and manufacturing warranty
- Made in Finland/Estonia
- Weight: - Hook back 10×15 cm: 37 g - Hook back 15×20 cm: 64 g - Hook back 20×30 cm: 90 g
- Main material: 100% polyester
- Webbing: 100% polyester
-
The Range Master Pouch Small is the ideal storage bag for storing chargers or cartridges. The bag fits perfectly in the Range Master Duffel, Qualifier and Backpack. material 100% Polyester Details:- Carrying straps.
- Main compartment with 2-way zipper.
- Lid with webbing ring for stacking.
- Padded lid.
- Bottom with PE plate.
- Velcro for ID patch.
- Capacity: 1.5 litres.
- Dimensions: approx. 10 x 14 x 11.5 cm.
- Weight: approx. 120 g.