- TPR closure (thermoplastic rubber) ensures a firm fit around the wrist.
- Palm made of durable synthetic leather (4000 cycles ASTM D3884).
- Nylon tires for storage.
- Serrated index finger and thumb folds for flexibility.
- 3 fingers with annular microfiber strips.
- Eva foam knuckle protectors.
- Weight: approx. 70 g / pair (size M).
-
The 5.11 Tactical High Abrasion Tac Glove is a light and robust combat glove with synthetic leather with high wear resistance on the palms and fingertips. Annular microfiber strips on key fingers provide additional support. Reinforcements with notches on the index finger and thumb for maximum freedom of movement. Material Upper: 82% nylon 18% polyurethane; Synthetic leather: 60% nylon 40% polyurethane; Sides of the fingers: 100% elastane (spandex); Single cushion: 100% EVA; Print and closure: 100% TPR (thermoplastic rubber) Certified according to CE EN388: 2016 4121X. Details: -
Developed and built with direct input from active K-9 teams and is certified according to CE EN 388: 2016. This glove combines a Vibram® anti-friction handrest and a hard-wearing hand palm made of synthetic suede for better grip on rope or webbing. Certified according to CE EN 388: 2016 4121X. Details:- Neoprene cuff against the ingress of dirt and moisture.
- Reinforced cuff and lip.
- Adjustable Velcro closure.
- Very hard-wearing palm of synthetic suede with thermally stamped fingers.
- Cast Vibram anti-friction patch in the palm of the hand.
- Padded ankle.
- Top material of breathable 4-way stretch.
- TAA compatible.
- Weight approx. 130 g / pair (size L).
- Size key: S/7; M / 8; L /9; XL / 10; XXL / 11.
-
The 5.11 Tactical Station Grip 2 glove offers the highest level of comfort and durability with excellent ergonomics, padding and protection. It convinces with a sporty design and an optimized fit. Material Imitation leather palm 60% nylon and 40% polyurethane Stretch fabric handback 93% nylon and 7% elasthan Palms of 100% nylon Certified according to EN388: 2016-2 1 2 1 X. Details:- Preformed, breathable ankle protection of neoprene.
- Palm of synthetic suede with hard-wearing finish.
- Breathable 4-way stretch top material.
- Velcro closure on the wrist.
- Reinforced cuff seam/ pull lip.
- TAA compatible.
- Weight approx. 100 g / pair (size L).
-
Not in stock - on order
The TAC A3 from 5.11 Tactical is a light yet robust operational glove with wear-resistant reinforcements on the palms. The reinforcements on the palm and the outside of the index finger support precisely those areas that are particularly loaded. The inserts on the inside of the hand provide an anti-slip grip and protect against sanding. On the thumb is a soft, absorbent material to wipe away sweat. Material Imitation leather palm 60% nylon and 40% polyurethane Stretch fabric handback 93% nylon and 7% elasthan Palm finishes of 100% nylon Neoprene cuff 100% nylon T-shirt back of terry 80% cotton and 20% polyester Certified according to EN388: 2016-2 1 2 1 X. Details:- Palm of synthetic suede with hard-wearing finish.
- Breathable 4-way stretch top material.
- Velcro closure on the wrist.
- Ring cut index and middle finger.
- Finishing of terry cloth on the thumb.
- Reinforced cuff seam/ pull lip.
- TAA compatible.
-
If precision and a certain instinct are paramount, the Taclite 3 combat glove is the first choice. With its light design, the Taclite 3 sits like a second skin. The hand back is made of breathable 4-way stretch material and the palms of soft sheepskin. Material Palm of 100% leather Stretch fabric handrug 85% nylon and 15% elasthan Cuffs of 90% neoprene and 10% polyester Certified according to EN388: 2016-3 0 1 1 X. Details:- Form-fitting 4-way stretch top.
- Adjustable Velcro on the wrist.
- Sweat wiper cuff on the wrist.
- TAA compatible.
-
Hardface men's gloves made of Polartec® Hardface® material. Polartec® Hardface® is a patented polymer treatment applied to fleece to improve resistance. Versatile From the outdoor world to the different hunting environments such as Open Country, Forest, Mountain and Waterfowler, through the various shooting sports disciplines, a range of Multifield products to meet all requirements.
Features
- Touch screen index finger
- Anti-slip palm
- Printed Beretta logo
- Suitable for temperatures from 0 °C to 10 °C
-
Not in stock - on order
Light and breathable unisex 3D mesh shooting gloves with non-slip palm and cotton terry. The Pro Mesh shooting gloves are designed to give you the best grip on the gun, thanks to the non-slip palm. Features- Breathable
- Moisture management
-
Not in stock - on order
Hunting gloves in Polartec® Wind Pro® stretch fabric with convertible index finger and touchscreen-compatible inserts on fingertips that leave you free to use your smartphone without having to take off your gloves. The Polartec® Wind Pro® hunting gloves are made with Polartec® Wind Pro® fabric wich is extremely breathable yet provide 4x more wind resistance than traditional fleece. This is the “super fleece” which spans an incredibly wide range of conditions; performs as both outerwear and insulation; and offers exceptional durability. This is a versatile fabric which can be worn all year long for a variety of activities. Features:- Beretta logo printed on the back of hand.
- Velcro to fix the convertible index finger.
- No skid palm and fingers with diamond shape rubber grip.
- Touch-screen insert on idex fingertips.
- Cuff made of stretch fabric.
- Tape in Beretta stripes color on the cuff.
-
The First Tactical™ Slash & Flash Hard Knuckle Glove is a reliable and flame retardant tactical glove with cut protection. The palm of the Slash & Flash Hard Knuckle Glove is made of goatskin and Kevlar® lining. The back of the hand is made of flame retardant Nomex® Jersey. The hard TPR knuckle protection and TouchTac™ touchscreen function make it a functional tactical glove. Material Palm: 100% leather (goatskin); back of the hand: 100% meta-aramid (Nomex®); Lining back of hand: 100% cotton; lining palm: 100% aramid (Kevlar®). Details:- Soft goat leather palm.
- Kevlar® lined palm (cut protection level 2).
- Back of the hand in flame retardant Nomex® jersey.
- Hard TPR knuckle protection.
- TouchTac™ touch screen function.
- Weight: approx. 94 g/pair (size M).
- Machine wash cold
- Do not bleach
- Drying on a leash
- Do not iron
- Do not dry clean
-
Highly tactile, cut-resistant abseiling glove, anatomically shaped, abrasion resistant thanks to leather finish on palm and inside fingers. For abseiling in the field, on buildings, for rope work and for high and deep rescue work. Compatible with touch screens. Rapel gloves are also ideal for K9 companions thanks to their extra reinforcement on the inside. Product- Anatomical climbing and abseiling glove
- Abrasion-resistant palm reinforcement made of goatskin leather with light padding. Perfectly suited for working with thin rope.
- Leather reinforcement at fingertips, knuckles and 1st phalanx
- Touchscreen capability
- Eyelets for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Abrasion-resistant palm reinforcement made of goatskin
- Light padding, suitable for working with thin rope
- Leather reinforcement on the thumbs, fingertips, knuckles and 1st fingertip
- Eyelet for attaching to carabiner
- Touchscreen compatible
- Back hand material: 94% polyester, 6% elastane
- Palm material: 100% leather
- Inner material: Cuff: 100% polyamide + 85% SBR, 15% CR
- Material: Synthetic fiber, leather
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Abrasion resistant, impact protection, touchscreen compatible
- Area of use: Rappelling, Tactical use, Combat use
- Areas of use: Military Special Forces, S.W.A.T. / SEK, Air Force helicopter units
- Colors: coyote
- Closure: Velcro
-
Pair of black tactical gloves, lightweight and very comfortable, with an ergonomic fit that fits perfectly in the hand. They have an excellent feel and are touchscreen compatible. Product information- Lightweight glove with high wearing comfort
- Extremely tangible
- Ergonomic cut perfectly adapted to the hand
- Synthetic leather reinforcements on the palm
- Breathable
- Touchscreen compatible
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Highly tactical glove
- High wearing comfort thanks to anatomical fit
- Touchscreen compatible - easy operation of smartphone or tablet
- Secure fit thanks to Velcro fastener
- Also available in coyote and camouflage
- Back hand material: 100% aramid; Reinforcement: 60% polyamide, 38% polyurethane, 2% other fibres
- Palm material: 60% polyamide, 38% polyurethane, 2% other fibres
- Material: synthetic fibers, leather
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical Fit, Breathable, Touchscreen Compatible
- Scope of application: Searches, Tactical use
- Areas of application: S.W.A.T. / SEK, General policing
- Colours: black
- Closure: Velcro
-
Pair of black tactical gloves, lightweight and very comfortable, with an ergonomic fit that fits perfectly in the hand. They have an excellent feel and are touchscreen compatible. Product information- Lightweight glove with high wearing comfort
- Extremely tangible
- Ergonomic cut perfectly adapted to the hand
- Synthetic leather reinforcements on the palm
- Breathable
- Touchscreen compatible
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Highly tactical glove
- High wearing comfort thanks to anatomical fit
- Touchscreen compatible - easy operation of smartphone or tablet
- Secure fit thanks to Velcro fastener
- Also available in coyote and black
- Back hand material: 100% aramid; Reinforcement: 60% polyamide, 38% polyurethane, 2% other fibres
- Palm material: 60% polyamide, 38% polyurethane, 2% other fibres
- Material: synthetic fibers, leather
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical Fit, Breathable, Touchscreen Compatible
- Scope of application: Searches, Tactical use
- Areas of application: S.W.A.T. / SEK, General policing
- Colors: Camo
- Closure: Velcro
-
Pair of black tactical gloves, lightweight and very comfortable, with an ergonomic fit that fits perfectly in the hand. They have an excellent feel and are touchscreen compatible. Product information- Lightweight glove with high wearing comfort
- Extremely tangible
- Ergonomic cut perfectly adapted to the hand
- Synthetic leather reinforcements on the palm
- Breathable
- Touchscreen compatible
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Highly tactical glove
- High wearing comfort thanks to anatomical fit
- Touchscreen compatible - easy operation of smartphone or tablet
- Secure fit thanks to Velcro fastener
- Also available in camo and black
- Back hand material: 100% aramid; Reinforcement: 60% polyamide, 38% polyurethane, 2% other fibres
- Palm material: 60% polyamide, 38% polyurethane, 2% other fibres
- Material: synthetic fibers, leather
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical Fit, Breathable, Touchscreen Compatible
- Scope of application: Searches, Tactical use
- Areas of application: S.W.A.T. / SEK, General policing
- Colors: Coyote
- Closure: Velcro
-
Pair of black gloves for tactical operations, very comfortable with a perfect ergonomic fit for the hand. They have flexible knuckle and finger protection and are touchscreen compatible. Product- Tactile glove for tactical use with high wearing comfort
- Ergonomic cut perfectly adapted to the hand
- Good grip thanks to synthetic leather on the palm
- Digital leather reinforcements in the palm
- Touchscreen compatible
- Soft TPE protection over the knuckles and fingers. Special anatomical design that allows the hand to bend easily and comfortably.
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Digital leather reinforcement on the palm
- Touchscreen compatible
- Anatomical TPR soft protector for easy finger movement
- Secure fit thanks to Velcro fastener
- Also available in coyote and camouflage
- Back hand material: 94% Polyamide, 6% Elastane
- Palm material: 60% polyamide, 38% polyurethane, 2% other fibres; Reinforcement: 100% leather
- Material: Digital Leather, Synthetic Fiber
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical fit, Touchscreen compatible
- Area of use: Tactical use, combat use
- Areas of use: Military Special Forces, S.W.A.T. / SEK, general policing, urban and off-road operations
- Colors: Black, Coyote and Camo
- Closure: Velcro
-
Pair of black gloves for tactical operations, very comfortable with a perfect ergonomic fit for the hand. They have flexible knuckle and finger protection and are touchscreen compatible. Product- Tactile glove for tactical use with high wearing comfort
- Ergonomic cut perfectly adapted to the hand
- Good grip thanks to synthetic leather on the palm
- Digital leather reinforcements in the palm
- Touchscreen compatible
- Soft TPE protection over the knuckles and fingers. Special anatomical design that allows the hand to bend easily and comfortably.
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Digital leather reinforcement on the palm
- Touchscreen compatible
- Anatomical TPR soft protector for easy finger movement
- Secure fit thanks to Velcro fastener
- Also available in coyote and camouflage
- Back hand material: 94% Polyamide, 6% Elastane
- Palm material: 60% polyamide, 38% polyurethane, 2% other fibres; Reinforcement: 100% leather
- Material: Digital Leather, Synthetic Fiber
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical fit, Touchscreen compatible
- Area of use: Tactical use, combat use
- Areas of use: Military Special Forces, S.W.A.T. / SEK, general policing, urban and off-road operations
- Colors: Black, Coyote and Camo
- Closure: Velcro
-
Pair of black gloves for tactical operations, very comfortable with a perfect ergonomic fit for the hand. They have flexible knuckle and finger protection and are touchscreen compatible. Product- Tactile glove for tactical use with high wearing comfort
- Ergonomic cut perfectly adapted to the hand
- Good grip thanks to synthetic leather on the palm
- Digital leather reinforcements in the palm
- Touchscreen compatible
- Soft TPE protection over the knuckles and fingers. Special anatomical design that allows the hand to bend easily and comfortably.
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Digital leather reinforcement on the palm
- Touchscreen compatible
- Anatomical TPR soft protector for easy finger movement
- Secure fit thanks to Velcro fastener
- Also available in coyote and camouflage
- Back hand material: 94% Polyamide, 6% Elastane
- Palm material: 60% polyamide, 38% polyurethane, 2% other fibres; Reinforcement: 100% leather
- Material: Digital Leather, Synthetic Fiber
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical fit, Touchscreen compatible
- Area of use: Tactical use, combat use
- Areas of use: Military Special Forces, S.W.A.T. / SEK, general policing, urban and off-road operations
- Colors: Black, Coyote and Camo
- Closure: Velcro
-
Pair of gloves for tactical operations, very comfortable with a perfect ergonomic fit for the hand. They have an anatomically designed knuckle protection against impact and are compatible with touch screens.- Glove for tactical use with high wearing comfort
- Ergonomic cut perfectly adapted to the hand
- Good grip thanks to synthetic leather on the palm
- Digital leather reinforcements in the palm
- Touchscreen compatible
- Anatomically pre-shaped soft protector on the back of the hand
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Touchscreen compatible
- Anatomical soft protector to protect the knuckles
- Digital leather reinforcement on the palm
- Secure fit thanks to Velcro fastener
- Also available in black and camouflage
- Back hand material: Main material: 94% Polyamide, 6% Elastane; Reinforcement: 60% polyamide, 38% polyurethane, 2% carbon
- Palm material: main material: 60% polyamide, 38% polyurethane, 2% carbon; Reinforcement: 100% leather
- Material: Digital Leather, Synthetic Fibers
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical fit, Touchscreen compatible
- Area of use: Tactical use, combat use
- Areas of use: Military Special Forces, S.W.A.T. / SEK, general policing, urban and off-road operations
- Colours: Black
- Closure: Velcro
-
Pair of gloves for tactical operations, very comfortable with a perfect ergonomic fit for the hand. They have an anatomically designed knuckle protection against impact and are compatible with touch screens.- Glove for tactical use with high wearing comfort
- Ergonomic cut perfectly adapted to the hand
- Good grip thanks to synthetic leather on the palm
- Digital leather reinforcements in the palm
- Touchscreen compatible
- Anatomically pre-shaped soft protector on the back of the hand
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Touchscreen compatible
- Anatomical soft protector to protect the knuckles
- Digital leather reinforcement on the palm
- Secure fit thanks to Velcro fastener
- Also available in black and camouflage
- Back hand material: Main material: 94% Polyamide, 6% Elastane; Reinforcement: 60% polyamide, 38% polyurethane, 2% carbon
- Palm material: main material: 60% polyamide, 38% polyurethane, 2% carbon; Reinforcement: 100% leather
- Material: Digital Leather, Synthetic Fibers
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical fit, Touchscreen compatible
- Area of use: Tactical use, combat use
- Areas of use: Military Special Forces, S.W.A.T. / SEK, general policing, urban and off-road operations
- Colors: Camo
- Closure: Velcro
-
Pair of gloves for tactical operations, very comfortable with a perfect ergonomic fit for the hand. They have an anatomically designed knuckle protection against impact and are compatible with touch screens.- Glove for tactical use with high wearing comfort
- Ergonomic cut perfectly adapted to the hand
- Good grip thanks to synthetic leather on the palm
- Digital leather reinforcements in the palm
- Touchscreen compatible
- Anatomically pre-shaped soft protector on the back of the hand
- Eyelet for attaching to carabiner
- Perfect fit thanks to Velcro fastener
- Touchscreen compatible
- Anatomical soft protector to protect the knuckles
- Digital leather reinforcement on the palm
- Secure fit thanks to Velcro fastener
- Also available in black and camouflage
- Back hand material: Main material: 94% Polyamide, 6% Elastane; Reinforcement: 60% polyamide, 38% polyurethane, 2% carbon
- Palm material: main material: 60% polyamide, 38% polyurethane, 2% carbon; Reinforcement: 100% leather
- Material: Digital Leather, Synthetic Fibers
- Material note: Contains non-textile parts of animal origin (leather)
- Features: Anatomical fit, Touchscreen compatible
- Area of use: Tactical use, combat use
- Areas of use: Military Special Forces, S.W.A.T. / SEK, general policing, urban and off-road operations
- Colours: black
- Closure: Velcro
-
The lightweight KinetiXx X-Beam search, shooting and insertion glove is the ideal companion for everyday use. Thanks to its exceptional wearing comfort and ergonomic fit, which is perfectly tailored to the hand, this glove offers excellent wearing comfort. Thanks to the bi-elastic material on the backhand, you retain full freedom of movement, while the palm is equipped with extremely high dexterity. This allows for precise control of weapons and other equipment, and easy search of pockets and other items. The abrasion behaviour of the glove is very good, so that it remains durable even with frequent use. The Velcro closure ensures a perfect fit and prevents the glove from slipping. In addition, the glove is compatible with a touchscreen, so you can navigate all mobile devices while wearing a glove. All in all, the search, shoot, and tactical glove is an indispensable tool for anyone who needs a reliable and comfortable glove to carry out any mission in the best possible way. Advantages- Extremely high tactility and sensitivity
- Bi-elastic material for full freedom of movement
- Good sanding behaviour
- Secure fit thanks to Velcro fastener on the palm side
- Touchscreen compatible
- Palm material: 50% nylon, 45% polyester, 5% elastane
- Palm material: 60% polyamide, 40% polyurethane; Interdigital space: 85% polyamide, 15% elastane
- Material: synthetic fibers, synthetic leather
- Material Note: NO
- Features: Abrasion resistant, Anatomical fit, Touch screen capable
- Area of use: Searches, Tactical use
- Areas of use: Military Special Forces, S.W.A.T. / SEK, General Police Work, Police Sniper Operations
- Colors: black and coyote
- Closure: Velcro
-
The lightweight KinetiXx X-Beam search, shooting and insertion glove is the ideal companion for everyday use. Thanks to its exceptional wearing comfort and ergonomic fit, which is perfectly tailored to the hand, this glove offers excellent wearing comfort. Thanks to the bi-elastic material on the backhand, you retain full freedom of movement, while the palm is equipped with extremely high dexterity. This allows for precise control of weapons and other equipment, and easy search of pockets and other items. The abrasion behaviour of the glove is very good, so that it remains durable even with frequent use. The Velcro closure ensures a perfect fit and prevents the glove from slipping. In addition, the glove is compatible with a touchscreen, so you can navigate all mobile devices while wearing a glove. All in all, the search, shoot, and tactical glove is an indispensable tool for anyone who needs a reliable and comfortable glove to carry out any mission in the best possible way. Advantages- Extremely high tactility and sensitivity
- Bi-elastic material for full freedom of movement
- Good sanding behaviour
- Secure fit thanks to Velcro fastener on the palm side
- Touchscreen compatible
- Palm material: 50% nylon, 45% polyester, 5% elastane
- Palm material: 60% polyamide, 40% polyurethane; Interdigital space: 85% polyamide, 15% elastane
- Material: synthetic fibers, synthetic leather
- Material Note: NO
- Features: Abrasion resistant, Anatomical fit, Touch screen capable
- Area of use: Searches, Tactical use
- Areas of use: Military Special Forces, S.W.A.T. / SEK, General Police Work, Police Sniper Operations
- Colors: black and coyote
- Closure: Velcro
-
2ndSkin - MoG 8108B 2ndSkin is mog's most versatile glove, deployable for police, security, customs, defense and more... This tactical glove feels like a second skin due to its slim fit. What's interesting about this 2ndSkin?- The use of thin goatskin and the specific construction of the fingers provides maximum mobility. The leather is liquid repellent so that blood, sweat, urine, etc. cannot infiltrate the glove.
- Strengthening the zone between the index and the thumb makes the glove more durable when handling (e.g. reloading) weapons.
- The specific design of the index finger allows perfect control of the weapon and ensures very high precision when frisking.
- In addition, this glove has a cutting protection level 4 in the palm, and the heat-resistant and fire retardant lining prevents burns in the event that the barrel of the weapon is held.
- A neoprene knuckle guard and a short cuff with cutout for watches increase wearing comfort.
-
The MoG Abseil/Rappel gloves have been developed in collaboration with various dedicated users and specialists in tactical rope training and altitude work instructors. The result is a slim fit abseil/rappel glove that allows the user to walk smoothly on the rope thanks to a number of distinctive features:- Palm made of soft goatskin and durable split leather, with a very high abrasion resistance (level 4, or more than 8000 cycles according to the Martindale test!) and excellent dexterity (level 5).
- The glove offers basic protection against heat and is certified according to EN407 - Contact heat. (level 1).
- Slim finger design for good control when rigging and to enable activities such as rigging, climbing structures and ladders, vertical movements, etc.
- The fingertips of the index finger and thumb are touch-sensitive to the manipulation of touch-screen devices.
- The reinforced zones provide an extra layer of protection against abrasion and perforations.
- The back of the hand is made of a 4-way stretch fabric that is breathable and comfortable.
- Part of the knuckle area is provided with a neoprene patch to protect the knuckles from accidental bumps during ropes or climbing.
- Comfortable neoprene cuff that gives the wrist freedom of movement and basic protection against bumps.
- Integrated leather-reinforced hole in cuff for easy attachment of carabiners or gloves to belts, plate racks or bags, or to facilitate donning and doffing.
- Strong Velcro closure with large flap for adjustable fit and easy on and off.
- An ID label is sewn into the glove for easy personal identification of the glove for safety and hygiene purposes.
- The MoG Abseil/Rappel 9162 is currently available in full black (in stock) and Coyote Brown (on request).
- Unisex model available in sizes 6 (XS) to 13 (3XL)
- The glove is certified according to EN 388 and EN 407 standards for mechanical protection and for protection against contact heat respectively.
-
Commando - MoG 9102B This durable tactical army glove was designed together with the Belgian army from the ground up. This resulted in the following distinctive features:- The very thin suede on the palm allows the operator to wield a weapon, ensuring a maximum tactical level. The heat-resistant substance prevents burns in the event that the barrel of the weapon is held after prolonged shooting.
- In addition, the touch function on all fingers allows the use of touchscreen devices.
- Very good and snug fit
- Reinforcements on the palm, especially on the crucial parts, make this glove a lot more durable.
- Specially designed air holes for breathability
- Use of quick-drying substances
- Strong and lightweight knuckle protection for general protection and breaching operations, with foam padding for a comfortable fit.
Be sure to check the size chart with the images so that you can make the right choice regarding the size of your gloves! -
Fast Rope - MoG 9163 This glove was developed in collaboration with experts from the Dutch Defence. The goal was to develop a glove that provides both maximum protection during fast roping exercises and high tactility for handling weapons in case of interventions. Where most fast roping gloves do not meet both conditions, we designed a unique solution in the world of fast roping. The split leather palm provides excellent grip on both dry and wet ropes and is a great buffer against heat accumulation during fast roping. In addition, handling weapons with these gloves is no longer a theme. Applications- for fast rope work
- tested positive for descents up to 90 ft
- Split leather palm provides excellent grip on both dry and wet ropes and is a great buffer against heat accumulation during fast rope work.
- Slim Fit finger construction provides extremely high dexterity for handling ropes, weapons, radio and equipment, and prevents the risk of twisted fingers.
- Cutout in crucial places on index finger and thumb for extra flexibility.
- Highly durable top layer in split leather that provides safe cut protection and extra padding in the palm of the palm guarantees high protection against friction and heat generation, allowing rope work up to 90 Ft.
- Opening for attachment to carabiner.
- Stitching at strategic points ensures very high flexibility of the glove.
- Extra wide cuff with Velcro closure and reinforcement of the wrist.
- Back of the hand in elastic and quick-drying fabric for a breathable, comfortable fit.
- Reinforcement of critical areas on/between thumbs and forefinger, for extra protection
- Defense
- Police units (SRT, DSI, DSU, AT, ...)
- Bailouts
- 7 - 13
-
The MoG Fast Rope Tactical gloves have been developed in collaboration with the Instruction Group Rotary Wing (Royal Netherlands Army) and are primarily designed for professional and tactical use during (combat) operations. This 'rope-to-gun' type has a number of distinguishing features compared to the 'standard' Fast Rope glove- The slender cut finger construction allows for extremely high dexterity when handling ropes, but also allows for the manipulation of weapons, radios and other equipment as soon as one touches the glove. It also prevents the risk of twisted fingers.
- The multi-layered but thin layered palm construction with a split leather top layer provides excellent grip, buffers against heat build-up during the high-speed tug-of-war, and provides additional protection against cuts
- Split leather reinforcement layers on the fingers and in the crotch between thumb and index finger
- The glove offers a higher protection against heat accumulation in the palm and fingers and is certified according to the EN 407 standard - Contact heat protection level 2 (only claimed for palm and fingers).
- The conductive leather on the thumb and index finger makes it easy to use touchscreen devices
- Additional stitching lines and cut-outs at strategic points provide more dexterity
- Reinforcement of the critical areas on/between thumb and index finger, for extra protection
- The cut-out in crucial places on the index finger and thumb provides extra flexibility
- The back of the hand is made of 4-way stretch and quick-drying material that provides a breathable and comfortable fit, while the knuckle area is partially covered with neoprene that acts as soft impact protection in the event of accidents
- The short cuff allows for freedom of movement at the wrist and features a sturdy hook-and-loop closure for easy on and off and a snug fit around the wrist
- There is a strong and collapsible loop on the inside of the cuff for easy attachment to a carabiner, belt or plate carrier
-
Discreet, black needle protection glove in soft, durable full grain goatskin based on the highly approved CPN technology gives you the perfect combination of needle and cut protection. Perfect for searching and shooting. Key features- High cut resistance
- Resistance to needles
- Light shock resistance on the knuckles
- Soft full grain goatskin
- Bailouts
- Any surgery with a slight risk of needles and glass
- Frisk
- Law enforcement
- Security
- Waste management
- Rescue teams
- Fire brigade
- EN 388:2016
- EN 420:2003
- ASTM F2878-10
-
Masters of Gloves Shelter - MoG 4301 Seamless lightweight, 100% waterproof and windproof glove that is highly finger sensitive and gives you maximum agility. Laminated membrane technology from Masters of Gloves for excellent protection against rain and moderate cold. This glove is characterized by: • 3-layer construction with lamination technology • perfect and tight fit • highly durable knitted nylon outer layer • equipped with waterproof PU membrane, ultra-thin and breathable • Merino wool lining with moisture-wicking antibacterial effect • Silicone MoG print on the fingers and palm for good grip Technical composition :- Shell: 95% nylon, 5% rubber
- Inside: 38% acrylic, 38% merino wool, 20% nylon, 2% lycra, 2% spandex
- PU membrane
- intended for tactical and recreational use in a wide range of situations requiring high mobility
- provides protection against wind, rain and cold
- can also be used for precision work, outdoors, ...
- Defense
- police
- Administrations
- Guards
- logistics
- Outdoor (cycling, hiking, ...)
-
The development of our new synthetic and lightweight combat glove is based on the key features of the Target Light Duty gloves, which offer maximum dexterity and wearing comfort, allow perfect control of weapons and are enhanced with the proven and advanced technology of the D3O® impact protection. The Target Combat is an extremely finger-sensitive and slim fit tactical glove that is equipped with the MoG/AX ® DexSuede and D3O ® impact technology. Main features :- Palm made of DexSuede - a very thin synthetic suede that offers maximum dexterity and dexterity.
- DexSuede also protects the user from 100-degree contact heat for 10 seconds.
- The fingertip stitched slim finger construction provides extremely high dexterity for perfect weapon handling, control of radios and delicate equipment
- Reinforcements on the trigger guard for more durability, dexterity and wearing comfort.
- 2 flexjoints on the index finger for maximum flexibility when handling weapons
- C-Grip construction improves the durability of your glove and protects the index finger from burns from the hot barrel of your gun.
- Thumb construction for reloading - reinforced thumb piece and specific design for perfect reloading of magazines.
- Reinforced patch on the heel provides extra strength against friction during use.
- Back hand made of 4-way stretch, durable, breathable and quick-drying fabric.
- D3O® knuckle protector with impact protection level 1 - covered with a double layer of Cordura® stretch for durability and abrasion resistance.
- Comfortable neoprene cuff with cut-out for watches - fits very well on the wrist for maximum freedom of movement at any time
- High-quality Velcro closure for adjustable fit covered with TPR, double stitched, prevents dust or sand traps
- Thumb, index finger and middle finger are touchscreen compatible thanks to the conductive suede patches
- Mixed silicone print for excellent grip on weapons, ropes, etc., but also on textiles, sweaty skin, ...
- Black
- Coyote Brown
- Wolf Grey
-
The MoG 'Target shooting glove series' have been developed in collaboration with various dedicated and heavy users within Special Forces and law enforcement during extensive training sessions in different environments. The Target High Abrasion 8109 is a highly finger-sensitive and smart fit tactical glove equipped with the MoG ArmaSuede technology. This unmatched synthetic suede performs 8 times stronger than the tactical standard. Main features :- Palm of the hand made from ArmaSuede - synthetic suede that combines high dexterity with extremely high abrasion resistance
- ArmaSuede also protects the user from contact heat of 100 degrees for 10 seconds.
- Slim-fit finger construction stitched over the fingertips for extremely high dexterity for perfect handling of weapons, searches, or operating radio and delicate equipment.
- Reinforcements of the trigger bracket for more durability, dexterity and wearing comfort.
- C-Grip construction improves the durability of your glove and protects the index finger from burns from the hot barrel of your rifle.
- Reload thumb construction - reinforced thumb surface and specific design for perfect reloading of magazines.
- Back of the hand made of 4-way stretch, durable, breathable and quick-drying material.
- Comfortable neoprene cuff that provides excellent freedom of movement at the wrists and basic impact protection.
- High quality hook and loop closure, double stitched, prevents catching dust or sand.
- Compatible with touchscreen.
- Mixed silicone print that provides an excellent grip on weapons, ropes, etc. but also on textiles, sweaty skin, ...
- Reinforced opening that serves both as a sturdy pull loop and as a fastening point on belts or carbines
- Weapon handling
- All-round tactical operations
- Searches
- Patrol
- Armed / Special Forces
- Law enforcement
- Special Units Police
- Safety
- Customs
- All black
- Coyote Brown
- Wolf grey (only on request)
-
The MoG 'Target shooting glove series' have been developed in collaboration with various dedicated and heavy users within Special Forces and law enforcement during extensive training sessions in different environments. The Target High Abrasion 8110 is a highly finger-sensitive and smart fit tactical glove equipped with the MoG ArmaSuede and ErgoShield technology. Main features :- Palm of the hand made from ArmaSuede - synthetic suede that combines high dexterity with extremely high abrasion resistance
- ArmaSuede also protects the user from contact heat of 100 degrees for 10 seconds.
- Slim-fit finger construction stitched over the fingertips for extremely high dexterity for perfect handling of weapons, searches, or operating radio and delicate equipment.
- Reinforcements of the trigger bracket for more durability, dexterity and wearing comfort.
- C-Grip construction improves the durability of your glove and protects the index finger from burns from the hot barrel of your rifle.
- Reload thumb construction - reinforced thumb surface and specific design for perfect reloading of magazines.
- Back of the hand made of 4-way stretch, durable, breathable and quick-drying material.
- ErgoShield - 3D molded and low profile TPR design, as seen on knuckle area and the back of the fingers, that protects you from shocks, bumps or pinch hazards. It is a barely perceptible protection against bumps.
- Comfortable neoprene cuff that provides excellent freedom of movement at the wrists and basic impact protection.
- High quality hook and loop closure, double stitched, prevents catching dust or sand.
- Compatible with touchscreen.
- Mixed silicone print that provides an excellent grip on weapons, ropes, etc. but also on textiles, sweaty skin, ...
- Reinforced opening that serves both as a sturdy pull loop and as a fastening point on belts or carbines
- Weapon handling
- All-round tactical operations
- Searches
- Patrol
- Armed / Special Forces
- Law enforcement
- Special Units Police
- Safety
- Customs
- All black
- Coyote Brown
- Wolf grey (only on request)
-
The MoG 'Target shooting glove series' has been developed in collaboration with a variety of dedicated and heavy users within Special Forces and law enforcement during extensive training sessions in a variety of environments. The Target Trivium 8114 is a semi-fingerless and slim fit tactical glove equipped with the MoG ArmaSuede and ErgoShield technologies. Combining extreme durability with an ergonomic impact design, the glove offers a snug fit, yet the dexterity and precision of bare fingers for optimal control and versatility in a variety of tasks. FYI : Trivium is Latin for 'triple' and refers to the 3 open fingers. Main features :- Palm material made of ArmaSuede - synthetic suede that combines high dexterity with extremely high abrasion resistance.
- ArmaSuede also protects the user from contact heat of 100 degrees for 10 seconds.
- Semi-fingerless model with full dexterity for perfect weapon control (sniper, ...) or for operating radio and sensitive equipment. You don't have to cut off the index finger of your glove.
- The C-Grip construction improves the durability of your glove.
- Back hand made of 4-way stretch, durable, breathable and quick-drying fabric.
- ErgoShield - 3D molded and low profile TPR design, such as on the knuckles and back of the fingers, that protects you from shocks, bumps or pinch hazards. It's barely perceptible protection against impacts.
- Comfortable neoprene cuff provides excellent freedom of movement at the wrists and basic impact protection.
- High-quality Velcro fastener, double stitched, prevents dust or sand trapping.
- Mixed silicone print for excellent grip on weapons, ropes, etc., but also on textiles, sweaty skin, ...
- Reinforced opening that doubles as a sturdy pull tab as an attachment point to a belt or carabiner
- All black
- Coyote Brown
- Wolf Grey (only on order in larger quantities)
-
The MoG 'Target shooting glove series' have been developed in collaboration with various dedicated and heavy users within Special Forces and law enforcement during extensive training sessions in different environments. The Target - Light Duty 8111 is an ultra thin 0.6mm, slim fit and high finger sensitive glove that sits around your hand like a second skin. A real pioneer in this segment of gloves. This light duty glove is equipped with MoG DexSuede technology. Main features :- Palm made of hand material made from DexSuede - synthetic suede that combines high dexterity and extremely high dexterity.
- DexSuede is only 0.6 mm thin.
- DexSuede also protects the user from 100-degree contact heat for 10 seconds.
- Slim-fit finger construction that is stitched over the fingertips and provides extremely high dexterity for perfect weapon handling, search, or operating radio and delicate equipment.
- Extremely thin 0.6mm suede. Provides a very high dexterity on your tractor.
- Reinforcements of the trigger bracket for more durability, dexterity and wearing comfort.
- C-Grip construction improves the durability of your glove and protects the index finger from burns from the hot barrel of your rifle.
- 2 flexjonints at the level of the shooting finger. These ensure maximum flexibility while handling your weapon.
- The design of the thumb allows perfect reloading of magazines.
- Back of the hand made of 4-way stretch, durable, breathable and quick-drying fabric.
- Quick, easy and silent to put on. Fits very well with the wrist, so that it always has maximum freedom of movement.
- Mixed silicone print that provides an excellent grip on weapons, ropes, etc. but also on textiles, sweaty skin, ...
- Reinforced opening that serves both as a sturdy pull loop and as a attachment point to belts or carabiners
- Compatible with touchscreen
- All black
- Coyote Brown
- Wolf grey (only on request)
- Weapon handling
- All-round tactical operations
- Searches
- Patrol
- Armed / Special Forces
- Law enforcement
- Special Units Police
- Safety
- Customs
-
The MoG 'Target shooting glove series' have been developed in collaboration with a number of dedicated and heavy users within Special Forces and law enforcement during extensive training sessions in a variety of environments. The Target Polar 5505 is a winter tactical glove that provides good control while handling weapons and operating touchscreen devices during tactical operations. This sturdy yet slim-cut tactical glove features the MoG DexSuede technology. Main features :- Palm made of DexSuede - a very thin synthetic suede that offers maximum dexterity and dexterity. The DexSuede layer is laminated with a polyester fleece lining that provides cold protection in the palm and fingers.
- DexSuede also protects the user from 100-degree contact heat for 10 seconds.
- The slim construction of the fingers provides sufficient dexterity for perfect handling of weapons and the operation of sensitive equipment compatible with touch screens.
- Reinforcements on the trigger guard provide more durability, dexterity and carrying comfort.
- The C-Grip construction improves the durability of your glove and protects the index finger from burns from the hot barrel of your rifle.
- The back of the hand is made of windproof and water-repellent softshell material.
- The knuckle panel provides some impact protection thanks to the neoprene insert and TPR molds on the lower phalanges.
- On the back of the thumb is a terry cloth that serves as a nose wipe or to clean glasses or visors.
- The neoprene cuff sits comfortably on the wrist.
- With the extended Velcro fastener, the glove can be easily tied around the wrist.
- Thumb and index finger are compatible with touchscreens thanks to the conductive suede patch (thumb) and built-in fork (index).
- Mixed silicone print pattern provides excellent grip on weapons, ropes, etc., but also on textiles, sweaty skin, ...
- Concealed and foldable loop serves as an attachment point to belt or carabiner
- Black
- Coyote Brown
-
With the ColdWork ™ series, Mechanix offers a range of cold protection gloves, from light fleece solutions to heavy Primaloft and 3M Thinsulate ™ combinations. As the wind picks up and the temperature drops, grab the Mechanix ColdWork ™ Wind Shell gloves to brave the elements. The whole glove is lined with soft microfleece and PrimaLoft® Gold holds the warm air and helps you regulate your body temperature in bitter frost. The Wind Shell glove has a windproof membrane on the inside that prevents cold air from entering the glove, even in strong gusts of wind. Details:- The extended velcro cuff with Velcro ensures a firm fit.
- Heavy fleece construction and waterproof softshell back protection.
- PrimaLoft® 40g Gold Performance insulation from the hand on the back.
- Robust Armortex® thumb saddle reinforcement and fingertip reinforcement.
- PrimaLoft® 60g Gold Performance insulation from the hand at the back.
- The index finger with touchscreen.
- The detachable spring clamp makes it easy to store the gloves.
-
The Mechanix Wear® 0.5mm M-Pact glove from the Tactical Line is an anatomically shaped all-round glove with a padded wrist rest. Tactical combat glove with incomparable sensitivity. Designed and manufactured to handle the toughest jobs and assignments. The palm is made of 0.5 mm AX-Suede ™ synthetic leather and offers the perfect blend of tactile control and protection at the shooting range. The index finger and thumb have a pure polyester hood with a polyurethane coating for a fine and safe grip. The Lycra® inserts between the fingers guarantee breathability, comfort and freedom of movement. Perfect fit thanks to the elastic glove closure with Velcro and no hooks, so it can no longer get pinched. Material Palm: artificial leather (80% polyester, 18% polyurethane, 2% carbon): hand back: 94% nylon, 6% elastane (spandex); Back of thumb and fingers: 100% polyester; Artificial leather (80% polyester, 18% polyurethane, 2% carbon); Protectors: thermoplastic rubber; Inner lining: 100% polyester. Reviews Certified according to CE EN 388: 2016. Details:- The impact protection of thermoplastic rubber (TPR) on the back of the fingers and knuckles.
- Fingertip protection with thermoplastic rubber (TPR).
- The flat TPR closure ensures a firm fit around the wrist.
- Light TrekDry® adjusts to the back of the hand to reduce heat accumulation and sweat.
- Anatomical stitching seams adapt to the natural curve of the hand and ensure a precise fit.
- Stretchy flexible joints improve the mobility of the shooting fingers.
- 0.5 mm AX-Suede ™ provides an accurate and natural feel.
- Nylon belt.
- You can go in the washing machine.
- Weight: approx. 145 g / pair (size M).
-
Mechanix Wear Wind Azimuth
The Azimuth strives to protect military and SWAT team members with critical flame resistance during hardload operations. The glove is made of FR Nomex® and FR goatskin to protect operators exposed to heat and fire in the field. The Azimuth has made an extended glove cuff with Nomex® to extend the flame resistance beyond the wrist. The back of the hand is protected by an EVA foam filling to absorb shocks and protect against chafing. The Azimuth tactical glove provides connectivity in the field with touchscreen-capable goat learning technology. Features- The unobtrusive closure ensures a firm fit around your wrist.
- Padded knuckle protection with EVA foam reduces shocks and sanding.
- Flame retardant Nomex® hand protection.
- Nomex® glove cuff extends flame resistance beyond your wrist.
- Kevlar® wire construction improves structural integrity.
- Flame retardant goatskin palm infused with touchscreen technology.
- Removable trigger finger seams eliminate material waste.
- Nylon carry loops for storage.
- Army
- SWAT
-
Not in stock - on order
With the ColdWork ™ series, Mechanix offers a range of cold protection gloves, from light fleece solutions to heavy Primaloft and 3M Thinsulate ™ combinations. With the Mechanix ColdWork ™ Guide winter glove, you're always one step ahead of the cold this season. It's the perfect glove for outdoor work and winter adventures. The Mechanix ColdWork ™ Guide winter gloves cover your hands with PrimaLoft® 40g and 60g gold insulation to keep cold air out and help regulate body temperature in bitter frost. Thanks to the comfortable and elastic cuffs, the gloves are easy to put on. Details:- Comfortable elastic cuffs ensure a firm fit.
- Light fleece exterior with waterproof and windproof softshell back protection.
- PrimaLoft® 40g of golden hand insulation on the back.
- PrimaLoft® 60g of golden palm insulation.
- Waterproof palm with touchscreen function.
- The detachable spring clamp makes it easy to store the gloves.
-
When the thermometer drops, the Mechanix ColdWork M-Pact gloves are exactly what you need. Stay ahead of the cold with C40 3M Thinsulate insulation and waterproof SoftShell material that does not allow cold air to pass through. To withstand the toughest working conditions, we have designed an anatomical thermoplastic rubber (TPR) ectoskeleton that meets the ANSI 138 Level 2 guidelines for shock resistance. The synthetic leather palm features touch screen technology and special D30® padding on the palm for comfortable wearing. Details:- Thermal plastic rubber (TPR) closure ensures a secure fit on the wrist.
- Full TPR impact protection that meets the ANSI 138 level 2 impact protection standard.
- Waterproof SoftShell material on the back of the hand.
- Layered membrane provides essential windproofness.
- C40 3M Thinsulate retains warm air and helps regulate your body temperature.
- Sturdy Armortex® reinforcement for the thumb saddle.
- Touchscreen-ready synthetic leather offers the perfect blend of dexterity and durability.
- Two-layer inner fingertip strengthens the index finger and thumb for greater durability.
- Armortex's® palm reinforcement offers extra durability.
- D3O® padded palm absorbs and dissipates high impact energy through the palm.
- The removable spring clamp makes it easy to store the gloves.
-
The fresh, cold air can make even the simplest tasks more difficult, which is why we designed the ColdWork Original® with C40 3M Thinsulate insulation to keep the heat in and keep you mobile. A waterproof outer SoftShell layer keeps the hand back dry and prevents the wind from penetrating when working in cold weather. The sheepskin-lined synthetic leather palm has touchscreen technology to keep you connected. Intended use- Maintenance and repairs
- Machine guidance
- Renovations
- The closure of thermal plastic rubber (TPR) ensures a secure fit on the wrist.
- Close sheepskin design
- Waterproof SoftShell material on the back of the hand prevents cold air from entering.
- The C40 3M Thinsulate™ insulation retains the warm air and helps you regulate your body temperature.
- Fixed Armortex® reinforcement for the thumb saddle.
- The touchscreen-compatible faux leather offers the perfect blend of agility and durability.
- The detachable spring clip makes it easy to store the gloves.
-
Hard work in cold weather? With the Mechanix ColdWork Peak gloves with PrimaLoft Gold 100 g insulation and waterproof membrane you are well equipped. The valve consists of a water-repellent SoftShell outer material and a sturdy, 5 mm padded knuckle protection as shock protection during work. The palm has a waterproof Armortex® handle and touchscreen technology on the index finger. material Palm: leatherette 1 (80% polyester, 20% polyurethane), synthetic rubber fabric (87% polyvinyl chloride, 13% polyethylene bitrephthalate); Back of hand: Thumb: Synthetic, rubber fabric (87% polyvinyl chloride, 13% polyethylene bitrephthalate); Fingers: leatherette 2 (100% polyester), leatherette 3 (100% nylon); Leatherette 4 (96% polyester, 4% nylon), leatherette 1 (80% polyester, 20% polyurethane); Lining material: Tricot (100% polyester); Inner lining: PrimaLoft 100g (100% polyester) Reviews Details:- Extended cuff with adjustable ladder buckle and drawstring.
- Water-repellent SoftShell outer material.
- 5 mm padded ankle protection.
- PrimaLoft® 100g gold performance insulation.
- Fixed Armortex® reinforcement for the thumb saddle and fingertips.
- A waterproof membrane keeps hands dry in rain, sleet or snow.
- A sturdy Armortex® layer on the palm provides a waterproof and secure grip.
- Thanks to a touchscreen-enabled palm technology, you'll stay connected even in winter.
- The detachable spring clip makes it easy to store the gloves.
-
Lightweight and versatile, the Mechanix ColdWork™ Base Layer is packed with features to combat the cold and provide extreme dexterity. A thin microfleece-lined stretch SoftShell wraps the hand, providing warmth and flexibility. Slim enough to use as a base layer in combination with another glove, but also water-repellent to withstand the elements. A rollover cuff ensures a snug fit and keeps the elements out. The palm combines touch-screen-ready thumb and index finger patches with a Padlock™ silicone grip pattern for better grip and ultimate functionality in cold environments. Details- Water-resistant stretch SoftShell construction prevents cold air from sneaking in.
- Micro fleece lining adds warmth and provides exceptional comfort.
- Sleek, low-profile design allows the glove to be used as a liner or on its own.
- Touchscreen-enabled thumb and index finger patches.
- Padlock™ non-slip silicone palm pattern.
- Rollover cuff design ensures a snug fit and keeps the elements out.
- Nylon carrying loop for quick storage.
- Can be worn as a glove liner or as a standalone glove.
- Manipulation of weapons
- Snow removal
- Cold storage
- Maintenance and repair
- Operating Equipment
- Home Improvement
-
Lightweight and versatile, the Mechanix ColdWork™ Base Layer is packed with features to combat the cold and provide extreme dexterity. A thin microfleece-lined stretch SoftShell wraps the hand, providing warmth and flexibility. Slim enough to use as a base layer in combination with another glove, but also water-repellent to withstand the elements. A rollover cuff ensures a snug fit and keeps the elements out. The palm combines touch-screen-ready thumb and index finger patches with a Padlock™ silicone grip pattern for better grip and ultimate functionality in cold environments. Details- Water-resistant stretch SoftShell construction prevents cold air from sneaking in.
- Micro fleece lining adds warmth and provides exceptional comfort.
- Sleek, low-profile design allows the glove to be used as a liner or on its own.
- Touchscreen-enabled thumb and index finger patches.
- Padlock™ non-slip silicone palm pattern.
- Rollover cuff design ensures a snug fit and keeps the elements out.
- Nylon carrying loop for quick storage.
- Can be worn as a glove liner or as a standalone glove.
- Manipulation of weapons
- Snow removal
- Cold storage
- Maintenance and repair
- Operating Equipment
- Home Improvement
-
With the ColdWork™ series, Mechanix offers a range of gloves for cold protection, from lightweight fleece solutions to heavy-duty Primaloft and 3M Thinsulate™ combinations. For working in fresh cold air, Mechanix has developed the ColdWork™ FastFit® glove, which keeps hands comfortably warm with heat-retaining C40 3M Thinsulate™ insulation. A waterproof SoftShell outer layer keeps the back of the hand dry and prevents wind from entering in cold weather. The palm is also equipped with the proven Mechanix leatherette with touchscreen technology. The FastFit® is easy to put on thanks to the elastic cuff. The ColdWork™ FastFit® provides insulation without sacrificing freedom of movement. Details:- The elastic elastic cuffs ensure a good fit.
- Waterproof SoftShell material on the back of the hand prevents cold air from entering.
- Comfortable fleece insulation keeps the heat in the glove without hindering your mobility.
- Sturdy Armortex® reinforcement for the thumb saddle.
- Touchscreen-ready synthetic leather offers the perfect blend of dexterity and durability.
- Removable spring clamp makes storing gloves easy.
-
Build it up, build it up or break it down. The Durahide ™ Original® illuminates eely hands with Durahide ™ performance leather when you're in full swing. Durahide ™ leather provides extreme wear resistance when working with power tools and transporting abrasive building materials. When the job's done, just throw them in the wash. With a range of practical applications, it's no surprise that The Original® is the most recognized and most worn work glove by anyone with a toolbox. Intended use- Construction
- Carpentry
- Material treatment
- Production
- DIY Home Improvement
- Flexible closure of thermoplastic rubber (TPR) ensures a firm fit on the wrist.
- Tight-fitting TrekDry® keeps your hands cool and comfortable while you work.
- Double stitched index finger and thumb reinforcement.
- Pinched fingertip construction improves fingertip strength.
- Durahide ™ leather forks improve the durability of the fingers.
- Durahide ™ leather palm provides extreme wear resistance.
- Machine washable leather.
-
Put on a pair of leather Durahide ™ FastFit® gloves and get started with Durahide ™ performance leather to protect your hands when you're in full swing. Durahide ™ performance leather provides extreme wear resistance when working with power tools and transporting abrasive building materials. When the job is done, just throw them in the wash for a fresh start to the work week. Intended use- General purpose
- Construction
- Carpentry
- DIY home improvement
- Stretch-elastic cuff ensures a firm fit.
- Form-fitting TrekDry® material keeps working hands cool and comfortable.
- DuraHide leather thumb reinforcement.
- Pinched fingertip construction improves fingertip strength and durability.
- Anatomically designed two-piece palm eliminates material accumulation in the palm of the hand.
- Durahide ™ performance leather protects your palm with extreme wear resistance.
- You can go in the washing machine.
-
Not in stock - on order
When you imagine the chores of the day and collect the necessary tools, don't forget your perfect work gloves. Mechanix Wear Ethel Leopard gloves are made of synthetic leather on the palm suitable for touchscreens to protect your hands from cuts, scratches and blisters while you work. With double stitching everywhere, the Ethel Garden Utility is sure to become an integral part of your daily routine. Intended use- General purpose
- Gardening
- DIY Home Improvement
- Extended elastic cuff ensures a firm fit on your wrist.
- Tight-fitting TrekDry® material helps keep hands cool and comfortable while you work.
- Touch screen-enabled synthetic leather keeps you connected.
- Pinched fingertip construction repositions vulnerable seams for extra fingertip resistance.
- Two-piece palm design prevents accumulation of material when working with hand tools.
- You can go in the washing machine.
-
When you imagine the chores of the day and collect the necessary tools, don't forget your perfect work gloves. Mechanix Wear Ethel Leopard gloves are made of synthetic leather on the palm suitable for touchscreens to protect your hands from cuts, scratches and blisters while you work. With double stitching everywhere, the Ethel Garden Utility is sure to become an integral part of your daily routine. Intended use- General purpose
- Gardening
- DIY Home Improvement
- Extended elastic cuff ensures a firm fit on your wrist.
- Tight-fitting TrekDry® material helps keep hands cool and comfortable while you work.
- Touch screen-enabled synthetic leather keeps you connected.
- Pinched fingertip construction repositions vulnerable seams for extra fingertip resistance.
- Two-piece palm design prevents accumulation of material when working with hand tools.
- You can go in the washing machine.