- Compatible with 5.56mm NATO magazines: FAMAS, M16, M4 or other magazines of the same caliber.
- Suitable for aluminium or polymer warehouses
- Made of highly resistant thermoplastic rubber with a rough, non-slip surface
- Very easy to use even with gloves on
- Easy to remove and install
- Weight: 14 g
- Sold per piece
-
With the Original Magpul® 5.56 NATO, you can get your warehouse out of the warehouse holder very quickly, allowing you to switch warehouses tactically more efficiently. It also reduces the noise of magazines clattering against each other when you're on the go. This is an essential accessory to avoid missing your warehouse in stressful situations and to increase your speed. These extractors are designed to replace the tape + paracord system that special forces used to make it easier to pull magazines out of their pockets. CHARACTERIZE: -
Not in stock - on order
Quiet Warrior USA Patch. The 5.11 moral patches are the perfect way to have a little fun without compromising your professional awareness or tactical skills. Features- Velcro fastening
- Made of TPU
- Diameter approx. 7.5 cm
- Color: 019
-
The compact and minimalist Vigilant Chest Rig allows the wearer to carry the equipment needed to enter the field. It can be worn directly on the combat suit using the H-bands or directly on the plategilet, it has 2 T-adapters to fit into the MOLLE loops of the waistcoat. It can hold 4 AR long gun magazines (FAMAS, AR15, HK 416, G36, AR10 and AK 47) and 2 PA handgun magazines. It has a multi-pen admin compartment, a combat notebook, and a sturdy phone. There is also a small zippered pocket for a grenade. The abdominal pocket is attached to the chest with a Velcro strap and can be used for abdominal protection or as a MEDIC, EOD or other bag. Two Cyalume glowsticks can be worn on the sides of the box. This compact and versatile Chest Rig is suitable for indoor, outdoor and training missions. It allows you to make the same gesture to grab these immediate tools, regardless of your configuration (in plainclothes or equipped with your plategilet). Features- Compact, minimalistic and very versatile chest gutter
- Compatible with regular (H-bands) or MOLLE-waistcoat (T-adapters)
- Detachable H-shaped adjustable shoulder straps with female clips and equipped with a hook and loop square on the back for the identification of the back.
- Middle part with plate width (SAPI) with 4 male clamps
- The velcro middle section is compatible with sheet holders with a Velcro surface.
- 2 Female clips with T-adapters for the MOLLE loops of a plate holder combat gister
- 4 rear magazine slots with elastic fastening straps
- 2 pockets for PA magazines, knife or lamp with Velcro closure
- 1 carrying case with two-way zipper (suitable for grenades)
- 1 administrative bag with a transparent panel for reading route sketches or vital reminders, inside it has elastics for various pens, knives, combat notebook and phone
- 2 elastic bands on each side of the chest for wearing 2 glowsticks.
- Zipper with pull tabs for gloved hands
- Place 3 patch on the front of the pockets for identification
- Made of nylon with waterproof inside
- Available colors: Black and coyote
-
Has a removable elastic cord and a pull tab to facilitate the use of the pouch- A tight general pocket to store small objects.
- The pouch is designed to be as lightweight and space-free as possible, while remaining strong enough for military use.
- Velcro closed flap with pull tab on the flap for easy opening even with gloves on.
- The flap can be pushed into the pocket for easier access to the thing you're carrying in the pouch.
- Elastic cord, on the pouch to secure the contents, even when the valve is open. The cord can be removed.
- Bottom drain hole.
- Fold back fastening system makes it possible to attach the bag to any equipment, vest or belt.
- It has Velcro straps on the back so that it can be worn horizontally on the belt.
- It fits: Pistol magazine, multitool, flash light or other similar objects.
-
The multifunctional mission boot Zephyr GTX MID TF is a true classic. The comfortable boot with mid-cut upper is widely known for its comfortable fit and distinct design. It's the boot of choice for anyone looking for a robust, versatile boot that offers thoughtful functionality. Thanks to its stable upper, made of a durable combination of suede leather and fabric, the ZEPHYR GTX MID TF offers exceptional support and grip on a wide range of terrains. Thanks to the GORE-TEX membrane, the boot can also handle missions in very wet areas. The lightweight design with the distinctive STABILITY FRAME defines the appearance of the boot and emphasizes the long-lasting wearing comfort of this proven task force classic. CHARACTERIZE:- 1.4-1.6mm thick leather crust
- Gore-Tex® Extended Comfort membrane
- Lowa Cross 2 traction outsole
- DuraPU® Dual Injection midsole for cushioning
- ATC comfort insole
- Monowrap® PU structure for stability
- Integrated stone catcher
- Closed hook lace closure
- Shaft height: 110 / 145 mm
- Pair weight: 1120 g (42)
-
The XPD pads are extremely light and supple, they adapt to the shape of the body and are therefore extremely comfortable to wear. They offer first-class protection and shock absorption. The cushions consist of a 1000D nylon-coated core of shock-absorbing EVA special foam and a protective plate made of hard plastic. The inside is extra lined with Cool Max, which increases the wearing comfort even more. The Rapid Deployment Clips is based on a hook-and-eye principle, so the protectors can be removed or fastened in no time. The two fastening straps can be adjusted lengthwise by means of Velcro and are made of a highly elastic material that adapts to the movements. material Upper material: 1000D Nylon; Lining: 100% Polyester Weight: approx. 200 g/pair. -
Not in stock - on order
A well-constructed enveloping design that provides comfortable protection with full peripheral vision. Tight-fitting sleeping arms with strong hinges, hold them well on your head during vigorous activities. Bright lens. They are CE certified, your guarantee for safe, reliable protection. functions:- Straight sleep and integrated nosepiece fit all face sizes.
- General purposes for indoor applications that require impact protection.
- Provides protection against excessive glare
- Provides 99% protection against harmful UVA and UV-B rays.
- Scratch-resistant lenses made of 100% polycarbonate
- Exceeds ANSI Z87.1-2003 high impact requirements
- CE EN166 certified
-
Not in stock - on order
MIL-TEC Multitarn® double pistol may pouch, perfectly suited for all your airsoft adventures. 100% polyester, coated with polyvinyl chloride Dimensions: 11 x 2 x 12 cm- molle mounting system
- drain eye
- Velcro closure
- mounting height individually adjustable
-
Not in stock - on order
Mil-Tec T-shirt in 100% cotton with round neckline and straight cut. material 100% cotton single jersey Weight: 140-145 g/m² Weight: approx. 125 g (size S). -
Not in stock - on order
The Mil-Tec Empty Shell Pouch is a modular universal case for empty magazines, shotgun shells or other utensils. Material 100% Polyester Details:- For empty magazines and devices.
- Snow apron with elastic band and cord stopper.
- Can be attached to belt or vest.
- Two side pockets on the outside.
- Outer compartment with Velcro closure and D-ring.
- Inner pocket with Velcro closure.
- Dimensions: ong. 14 x 7 x 20.5 cm.
- Weight: about 170 grams.
-
Not in stock - on order
Plastic canteen with screw cap. Delivery includes a canteen cover with insulating plush lining and an aluminum cup with folding bracket handles.- Capacity approx. 0.9 litres
- Weight about 410 grams
- Upholstery: 100% polyester, polyurethane coating
- Cup: aluminium
- Bottle: polyethylene
-
Not in stock - on order
Waterproof boonie with wide edge made of 100% nylon and a breathable polyurethane membrane that offers you protection from rain and sun. Material 3-layer laminate: 1st layer: 100% nylon; 2nd layer: breathable polyurethane membrane; 3rd layer: 100% polyester tape: 100% polyester; Cord: 65% polyester, 35% cotton. Contains non-textile parts of animal origin. Details:- Water-repellent, breathable
- Size adjustable with cord stopper.
- Ventilation holes on the sides.
- Molle / camouflage loops around the Boonie.
- Weight: approx. 100 g (size M).
-
The 5.11 Tactical® Quantum TDU® Pant is comfortable combat pants in a tactical style with essential functionality. The trousers are made of three different stretch fabrics for maximum flexibility and durability. It has 8 compartments in which all the necessary utensils can be stored. The comfortable waistband and stretch cross construction provide ultimate freedom of movement. Material Material 1: 71% polyester, 29% cotton (FlexLite Ripstop, Teflon® coating); Material 2: 100% polyester (Fast-Tac® Ripstop); Material 3: 87% polyester, 13% elastane (4-way stretch); YKK® zipper; PRYM® push button Details:- 3 different fabrics for maximum flexibility.
- Water-repellent Teflon® coating.
- Specially cut cross for more freedom of movement.
- Comfortable elastic waistband.
- Reinforced seating area.
- Preformed and reinforced knees with a insert for neoprene knee pads (optional).
- Gulp with YKK® zipper and PRYM® button.
- 2 hand pockets with clip reinforcements.
- 2 back pockets with Velcro.
- 2 thigh pockets with Velcro and insert bag on the inside.
- 7 reinforced belt loops (55 mm).
- Weight: approx. 510 g (size 32/30).
-
Not in stock - on order
Contour in 3D look On the back there is a Velcro fastening. the ones with the patch is sewn. Therefore easy to use The 80 x 30 mm size allows assembly on patch surfaces such as basecaps, backpacks, jackets -
FastFit® Coyote
The next generation of FastFit® tactical gloves is here. Take control with 0.6mm thick synthetic leather with high finger sensitivity and stay connected to full touchscreen technology in the palm of your hands. The FastFit offers an unparalleled fit with TrekDry ™ evaporative cooling and robust field storage loops. Features- Breathable TrekDry® keeps your hands cool and comfortable.
- Stretch-elastic cuffs ensure a firm fit.
- Anatomically designed two-piece palm eliminates accumulation of material.
- Pinched fingertip construction improves fingertip strength and durability.
- Very agile 0.6mm synthetic leather infused with touchscreen technology.
- Nylon carry loops for storage.
- You can go in the washing machine.
- Army
- Police
- Sports shooting
- Maintenance repairs
-
A 50 mm wide belt that can be used in many ways. To wear any pouch around your shoulders or waist. Like a hip belt on backpacks. As a light combat belt. A 40 mm garter oiler. 50 mm band and 25 mm tyres with 40 mm wide MOLLE openings, vertically on one side of the 50 mm band and horizontal on the other. A double adjustable buckle on the side closes the sling. -
The Swiss Eye Lancer clear is a lovely seated pair of glasses suitable for activities such as airsoft. It protects the eyes has polycarbanate lenses with an anti-fog and anti-scratch coating and give 100% protection against UVA, UVB and UVC up to 400 nanometers. The glasses come in a microfibre bag. Optimal wearing comfort with ear protection due to the flat legs, equipped with rubber. Specifications of the Swiss Eye Lancer clear: * Adjustable legs * Anti-fog / anti-scratch coating * 100% UVA, UVB and UVC protection up to 400 nm (nanometer) * Microfibre carrier bag * EN 1836:2005 + A1:2007 * STANAG 4296 -
Built with help from world-renowned tactical instructor Kyle E. Lamb, the 5.11 Tactical VTAC® 2 Point Padded Sling complements any standard rifle or submachine gun, offering superior flexibility and safety in any tactical situation. The quick-adjust action allows you to quickly switch shoulders or pull your firearm closer for tighter support in close quarters. The heavy nylon construction ensures durability and traction in all weather conditions, and the improved shoulder padding increases comfort. SPECIFICATIONS:- Safe and reliable 2-point rifle noose
- Quick to adjust for a quick shoulder/length transition
- Suitable for rifle or submachine gun
- Improved shoulder padding
- Heavy nylon for all weather conditions
- Superior traction in wet climates
- High impact clips
- Width: 2.5 cm
- 100% nylon
-
Not in stock - on order
Our Laser Cut Compact Dump Pouch can be attached to the belt or to any Warrior Series carrier. Made from a combination of Mil-Spec elastic and nylon for an ultra-compact design. To open, simply release the outer Hypalon safety tab, then pull the inner tab to fully open the bag. To repack, place the bag section back into the pocket and reattach the safety tab. This is attached with 2 MOLLE arms. Made from our high-quality composite laminate material and fabricated using our advanced laser cutting machines. Dimensions & Weight Length: 13 cm Width: 8.5 cm Height: 4 cm Weight: 0.083 kg -
While natural foliage is the ultimate helmet camouflage, a bushy cover with a 3D effect might be the next best thing. Quick and easy to use, easy to customize. They effectively break up helmet silhouettes and provide quick camouflage adjustment to suit different environments. The design is very simple, a single flat piece of 500D Cordura with alternating zigzag shapes cut into it. The zigzag pattern is positioned in such a way that it creates an opening for NVG mounts on the front. Small slits have been cut around the edges for the elastic cord. Thread the elastic cord through the slits, tie it at the back, and pull it over your helmet like a shower cap. Finish it off by pulling back any excess material and rolling it underneath yourself to tighten the cover. If you want to adjust the fit, you can play around with threading the elastic cord through the slits and zigzag pattern in different ways. And if you get really wild and feel the need: you can even cut off excess material from the cover, but of course, such huge adjustments are at your own risk. KEY FEATURES- 3D Effect Camouflage Plate for Helmets
- One-size-fits-most, best suited for high-cut L and XL helmets
- Lightweight Laser Cut 500D Cordura
- Quick and easy to apply and remove
- All color options offer good NIR performance
- 2-year material and product warranty
- Gemaakt in Finland
- Weight (in retail container): 65 g
- Dimensions (in retail packaging): 10 x 15 x 4 cm (W x L x D)
- Fabric: 500D Cordura (100% polyamide)
-
Embrace the Suck EQ. The morale patches of 5.11 are the perfect way to have a little fun without diminishing your conscientiousness or tactical ability. Features- Velcro fastening
- Made of fabric
- Dimensions: 6.4 x 3.7 cm
- Color : 019
-
A larger counterweight bag for Finnish Senop lead weights and 10 x 10 cm identification plates. Designed to work with the usual Ops Core FAST XP high cut helmet and our High cut helmet cover V1. KEY FEATURES- Internal elastic compartments for lead weights
- Designed for six weight discs of 45 x 60 x 5 mm
- Can also carry weights of other shapes and sizes
- Attaches to helmet rail with screws and loop
- Upper fastening straps for our High cut helmet cover V1
- External elastic loops for cord management etc.
- Also functions as a holder for spectacle straps
- 10 x 12 cm loop on the outside for patches
- All color options offer good NIR performance (read more)
- 5-year material and product warranty
- Gemaakt in Finland
- Weight: 60 g
- Fabric: 500D Cordura (100% polyamide)
- Webbing: 100% polyester
- Buckles: steel
-
Add effective camouflage to your gear with these serrated laser-cut camouflage strips. Quick and easy to apply, remove and reuse. KEY FEATURES- 3D effect camouflage for gear
- Kit contains five approx. 145 cm long scrim strips
- Lightweight Laser Cut 500D Cordura
- Easy to apply, remove and reuse
- All color options offer good NIR performance
- 2-year material and product warranty
- Gemaakt in Finland
- Weight (in retail box): 110 g
- Fabric: 500D Cordura (100% polyamide)
-
Phosphorescent PVC patch with Arktis logo and GhostFace from the movie Scream. At night, all cats are grey, or almost. "Darkness descends on the land, with All Hallows' Eve fast approaching. But you don't have to be afraid of ghosts and spirits, the real monsters have always been there. While unholy creatures can be terrifying, it's the Operators who really stand out in the night." CHARACTERIZE: Phosphorescent PVC patch Dimensions: 45 x 60 mm -
Pentagon Ranger 2.0 Pants newly designed 65% Polyester 35% Cotton Rip-stop fabric 215gsm. with an all-new specially developed mechanical stretch fabric. Perfect for Tactical, Medics, Range or casual Outdoor use. Specifications- 65% Polyester 35% Cotton
- 225gsm
- Mechanical 2-way stretch fabric
- YKK® main zipper
- Internal button
- Prym® snap button
- Teflon™ stain-resistant treated by Dupont®
- Tunnel tube waistband
- Stuffed bag
- Internal knee pads pockets
- Multifunctional groin pocket
- Convenient flap on Cargo bag
- Reinforced seat
- Dart pattern waistband
- 2 back pockets
- Document bag on cargo bag
- Internal pockets in the cargo bag
- Diamond cross for more freedom of movement
-
Our Tactic model is a high-cut leather boot that is perfectly suited for all-round tactical activities. The Tactical boot has a strong shaft which makes this boot lightweight and still offers torsion control when walking around. This boot has an outsole that is oil resistant and can also withstand temperatures up to 300 °C. With the heel anchor, ladder grip and SRA anti-slip, this boot also offers good grip even when walking over a ceramic tile moistened with a diluted soap solution.
Product description
- Upper material: Nappa Action leather, Textile
- Inner lining: Mesh
- Footbed: SJ foam sole
- Outsole: Rubber
- Safety standard: OB/FO, HRO, SRA
- Size range: EU 35-48 / UK 3.0-13.0 / US 3.0-13.5 / PN 21.5-31.5 / KOR 230-315
- Steel weight: 0.632 kg
- Standard: EN ISO 20347:2012
- ASTM: F3445:2021
Oil & fuel resistant The outsole is resistant to oil and fuel.Heat-resistant outsole The outsole can withstand high temperatures up to 300°CBreathable leather upper Natural leather offers high wearing comfort combined with durability in versatile applications.SRA The slip resistance is one of the most important features of safety and work shoes. SRA non-slip soles are tested on a ceramic tile with diluted soap solution. -
Not in stock - on order
The T-Series L2D is our main thumb-activated holster intended for service use with its full slide protection and our Jacket Slot Belt Loop. With its streamlined thumb-activated retention, the T-Series keeps your firearm at the ready while maintaining total safety. Thanks to a pulling movement that works according to the Master Grip principle, you can fight even under the most stressful conditions. A combination of reinforced outer polymer and smooth, sound-absorbing, hydrophobic lining ensures that your T-Series will perform regardless of the elements and the situation. As an extra safety measure, the L3D also has a strap over the back of the weapon. Includes Jacket Slot Belt Loop attached to the holster. Quick Dual Release (QDR) belt loop and 2-slot belt loop are sold separately.- Thumb-activated level 2 retention
- Sound-absorbing lining for stealth pulling and holstering
- Durable material provides protection with a sleek design for minimal size
- User-adjustable passive retention
- Low-friction internal material for smooth and effortless pulling
- Includes Jacket Slot Belt Loop attached to holster.
-
Not in stock - on order
ASG Dan Wesson Soft Bag Grey A stylish bag for the Dan Wesson series! Details:- Made of 600D nylon
- Fits all Dan Wesson replicas, even with optics!
- Separate compartment for the replica, with Velcro closure
- 3 mesh bags for exra ammunition or CO2 cartridges
- Elastic loops for 6 speedloaders
- Foam padding protects the replica
- Nice license on the front
- Ultimate carrying bag for the Dan Wesson owners!
-
This 5.11 Tactical hook and loop patch is designed for mounting at patch locations. Tone and adjust your gear to reflect your mood. CHARACTERIZE:- Moral patch in TPU
- Hook and loop
- Laser cut
- Rich in detail
- Dimensions: 7,5 x 6 cm
- Color: Blue (676)
-
Not in stock - on order
The P-40 Classic Gen.2 is designed from the ground up for superior comfort without compromise – even without compromising on its functionality or durability. These newly designed pants have a unique cut that allows for amazing freedom of movement. The cut also ensures that the knee pads stay in place (no more stopping, no more pulling). These tactical pants with many pockets are designed for the toughest operations. Large Schoeller® dynamic stretch panels in the seat and a special anatomical fit go hand in hand here, so you can enjoy unparalleled freedom of movement. Breathable, lightweight ripstop fabric and ventilation zippers at the knees will keep you comfortable all day or night. The P-40 Classic Gen.2 is cut so that the knee protection accessory stays in place and is barely noticeable. Instead, you'll notice how well the knee pads work – they're always there when you kneel and they're always ready to give you the right amount of protection. And best of all, no straps or strings are needed to hold them in place. It is fully compatible with the UF PRO 3D Tactical knee pads, sold separately. These pads are available in two versions: CUSHION for extra cushioning during prolonged kneeling and IMPACT for protection against sudden, hard shocks. The P-40 Classic Gen.2 Tactical Pants has seven spacious, feature-rich pockets that you can store an incredible amount of personal equipment and compact tools. The large side pockets contain inner compartments made of schoeller-dynamic® fabric. This allows you to store extra gear that stays in place (the design and construction of the inner pockets are designed so that stuff in them doesn't shift when you're on the go, which means the pants perform better and you can do your job more comfortably, so you don't have to worry about important stuff falling out). The P-40 Classic is made of highly breathable PolyCo ripstop material. Sweat or light rain dries very quickly in this fabric. At sub-zero temperatures, the P-40 Classic can easily be converted into thermal pants. They are compatible with the windproof UF PRO WINDSTOPPER® liner. Details:- Breathable, lightweight PolyCotton Ripstop material.
- High waistband with non-slip silicone insert.
- Stretch inserts in the waistband.
- Schoeller® dynamic stretch material in the seat.
- Pull-fly trouser top with double zipper, snap button and clamping hooks.
- 2 stab bags.
- 1 safety pocket with zipper in the left side pocket.
- 2 hip pockets with flap and Velcro closure.
- 2 thigh pockets with large storage space, special elastic inner pockets and access via Velcro flap and side zipper.
- Knee pockets accessible from the outside for easy insertion of 3D Tactical knee pads (sold separately).
- Ventilation zippers at the knees.
- 5 double belt loops.
- D-ring on the front belt loop.
- Adjustable hem with shoe hooks.
- Inner zipper for removable WINDSTOPPER® lining (sold separately).
- Weight: approx. 418 g (size 32/34).
-
5.56 Triple Direct Action Mag Pouch from Invader Gear in Wolf Grey. -
Sale!
100% cotton Jersey only Weight: 140-145 g/m2 Color: Camouflage Camouflage pattern: Flecktarn -
Not in stock - on order
The ergonomically shaped Defender Knee Pads First Tactical™ are flexible and breathable 3D knee pads made of EVA PU foam with TPU overlay for extra protection against stones. Fits the First Tactical™ Defender Pants tactical pants. material 70% polyester, 30% polyurethane. Details:- PU foam filling with TPU overlay.
- Moisture-wicking mesh.
- Ergonomically contoured 3D design.
- Perforated foam for good ventilation.
- Weight: approx. 130 g/pair.
-
Not in stock - on order
A stylishly adjustable ergonomic design, with ventilation in frame and nose bridge, that provides comfortable protection with full peripheral vision. Bright lens for general applications that require protection against impacts. They are CE certified, your guarantee for safe, reliable protection. functions:- Stylish, ergonomic frame combined with slim polycarbonate lenses for the ultimate in protection and style.
- The newly designed ventilated nose piece is soft and adjustable, allowing heat to be dissipated from the nose bridge and reducing fogging.
- Perfectly balanced from sleep tips to the back of the nose, for the best possible fit.
- High-quality optics offer extreme clarity and no distortion.
- Soft, double-injected rubber legs combined with fully adjustable, straight legs enhance the highest level of comfort and fit.
- The top of the frame is ventilated so that air can circulate and fog up is prevented.
- Curved lens with 9.75 base provides excellent lateral protection against wind and particles in the air.
- Provides protection against excessive glare.
- Provides 99% protection against harmful UVA and UV-B rays.
- Ansi Z87.1-2003 exceeds high impact requirements.
- CAN/CSA Z94.3-07.
- CE EN166 certified.
-
Not in stock - on order
Many fans of the 5.11 Tactical Trousers do not know that there is a vertical slot for neoprene cushions on the inside of the trouser legs at the level of the knees. The knee pads fit perfectly into the pants to provide the necessary protection. material Material: 90% rubber foam bonded with 10% nylon fabric, thickness 6 mm. -
MG AMMUNITION BAG -09 Fits in it: 200 x 5.56 mm or 200 x 7.62 mm or 200 cassette Beware: In your hand, over your shoulder or on the equipment vest functions:- The perfect case to carry ammunition for the SAW/Minimi machine gun
- For 200 rounds coupled 5.56 ammunition free of charge or in a cassette
- Also suitable for 7.62 coupled ammunition
- Can be used for 2 Cal 50 warehouses
- Webbing on both sides for attaching small bags
- The pouch can be attached to the vest or worn in a shoulder strap (not included)
- Article number: 22-00511-09-000
- EAN: 7332673301539
- Weight: 300 grams
- Dimensions: 18 x 19 x 8 cm
- Category: Holders & bags
- Color: Grey
-
12 mm flexible, ergonomic polyethylene knee pads. The pair of knee pads sits in the pockets on the inside of the pants, with the ribbed side facing inwards, to protect the knees. The text "This side towards the enemy" is placed on the outside of the pants. Holes have been punched into the knee pads to increase ventilation, making them cooler in hot weather. The lower part of the pads can be cut off to adjust the height so that it ends up on the knee when you kneel. The knee pad can be used in the Snigel combat pants Article number: 00-201669A01-000 Weight: 40 grams Dimensions: 25 x 18 x 2 cm -
Not in stock - on order
Thanks to the elastic inserts on the sides, you can store radios of different sizes in this bag. An adjustable elastic band and a subtraction mechanism provide the desired stability and ensure that the contents of your radio bag remain safe at all times. The radio can be removed quickly and easily using a clip lock. Thanks to the Velcro hook on the back, the Velcro radio bag can be attached to other equipment.- Color: Multitarn
- Weight: 100 grams
-
Not in stock - on order
Mil-Tec baseball cap with light, breathable mesh material and Velcro surfaces for identification of friend and foe. Material 83% polyester, 17% cotton Details:- Trucker-style baseball cap.
- Two Velcro surfaces for attaching patches.
- Light, breathable mesh material.
- Ripstop material on the flap and on the front.
- Adjustable in size with Velcro.
- Includes removable Mil-Tec® patch.
- Weight: about 70 grams.
-
Not in stock - on order
Baseball cap of ripstop with Velcro for identification of friend and foe on the front, back and on the cap. Material- 65% polyester, 35% cotton
- Adjustable at the back.
- Weight: about 65 grams
-
Electric GAMO compressor, portable all-in-one, up to 320 bar to fill the tank of your PCP. With 220V "charger" and car. With Gamo you can easily and comfortably fill your PCP; EconomicCompressor for PCP rifles 250 W· Maximum 320 bar, 3 loading phases; It's manual.· Voltage 220v, 220v charger (12V / 220V) or car connection· Weight: 9 kg
Exhaust air: 11 l / min. Rising air flow rate: 2700 r.p.m./min– 0.5 air cylinder. It takes 6 to 7 minutes from 200 to 300 bars– 0.5 air cylinder. It takes 18 to 20 minutes from 0 bar to 300 bar 110 – 220 VOnly to fill the "tank" of carbine or pistol, no large bottles. -
Warrior's Large Admin Panel is ideal to keep important paper/personal IDs safe. It has two pockets covered with a Velcro flap, a 9 mm pistol magazine and Velcro at the front for attaching a wide range of patches, eg blood type nationality flags etc. The large control panel takes up 4 rows of MOLLE on any compatible luggage carrier or bag. -
EMP pouches are designed to enable an unobtrusive solution that provides retention with the benefit of quick access for quick reloading. Designed for M4- and AK-style metal and P-Mags and offered in single dual and triple configurations to meet your operational requirements. -
The Warrior Utility Tool Pouch is suitable for small to medium-sized tools such as Gerbers 400 compact. This bag can contain 1 row of MOLLE on any compatible carrying belt or bag. -
TAA Specialty 0.5mm Coyote
Perfect feeling and high movement have found each other perfectly in combination with a 0.5mm palm protection. These Specialty 0.5mm Coyote shooting gloves are extremely lightweight made to provide a natural feel and lightweight hand protection in an anatomical design. 0.5mm AX-Suede ™ provides the perfect blend of tactile control and protection in the field or at the firing range. Breathable TrekDry® forms to the back of your hands to reduce heat development and the expandable flex joints improve trigger finger mobility for smooth manipulation. Features- Low-profile thermoplastic rubber (TPR) closure ensures a secure fit around the wrist.
- Lightweight TrekDry® forms to the back of the hand to reduce heat accumulation and perspiration.
- Anatomically stitched darts adapt to the natural curvature of the hand for an accurate fit.
- Expandable flexible joints improve trigger finger mobility.
- High finger sensitivity 0.5 mm AX-Suede ™ provides accurate feeling and high finger sensitivity.
- Nylon carry loops.
- You can go in the washing machine.
- Army
- Police
-
Weight: 150 g Fits out: Most machine guns in 7.62 or 5.56mm Looks up: On the body Features: A quickly adjustable and comfortable strap for the machine gun Ergonomic shape. Is attached to the machine gun with two carbine hooks. A padded strap with mesh for more comfort. Quickly switch between marcheer mode with a short band or shooting mode with a long band with a jerk on the tow lip on the buckle. -
The perfect little bag to put your empty magazines in during a firefight. Also good for storing gloves, hearing protectors, etc. Use it to preserve evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things you don't want in your hands. Rolled up in the bottom of the vest. Pull the square ring down, naturally, when you want to open the pouch. Zipper closed top. The flap can be opened on the inside of the pouch. Accommodates 4 magazines. Attributes Weight: 160 g Dimensions:24 × 16 × 9 cm Color: Grey -
Make an M-Pact® in the field. If you need control of your bare hands without sacrificing protection, grab the M-Pact fingerless. The next generation M-Pact tactical gloves protect soldiers and law enforcement officers with EN 13594-classified impact protection. D3O® palm filling drains powerful energy to reduce hand fatigue when you're fully engaged. Features- The shock protection of thermoplastic rubber (TPR) meets the EN 13594 impact standard.
- Closure of thermoplastic rubber (TPR) ensures a firm fit on your wrist.
- Breathable TrekDry® keeps hands cool and comfortable.
- Armortex® palm reinforcement.
- Fingerless design ensures maximum agility.
- D3O® palm filling absorbs and drains powerful energy.
- Durable palm of synthetic leather.
- Nylon carry loops.
- You can go in the washing machine.
- Police
- Sports shooting
- Maintenance and repair work
Delivery time + - 1.5 week.