-
JTG blood group patch B NEG, blackops, 50x50mm A variety of details realized in 3D, typical of a JTG patch, the realization will inspire you. Specially manufactured high-quality and flexible rubber patch in 3D look, quality of JTG Contour in 3D look / On the back is a Velcro surface that is sewn to the patch. This means that the JTG patch can be easily attached to any Velcro surface. / Thanks to its compact size, the patch can be quickly and individually attached to surfaces such as baseball caps, backpacks, jackets, vests, helmets, etc. -
Patch of Jackets To Go for blood group B positive. Velcro rear. Size: 26 x 50 mm Weight: 4g -
Patch from Jackets To Go for blood type A Positive. Velcro rear. Size: 52 x 27 mm Weight: 4 g Shipping Weight: 5g -
Not in stock - on order
Our Laser Cut Compact Dump Pouch can be attached to the belt or to any Warrior Series carrier. Made from a combination of Mil-Spec elastic and nylon for an ultra-compact design. To open, simply release the outer Hypalon safety tab, then pull the inner tab to fully open the bag. To repack, place the bag section back into the pocket and reattach the safety tab. This is attached with 2 MOLLE arms. Made from our high-quality composite laminate material and fabricated using our advanced laser cutting machines. Dimensions & Weight Length: 13 cm Width: 8.5 cm Height: 4 cm Weight: 0.083 kg -
The development of our new synthetic and lightweight combat glove is based on the key features of the Target Light Duty gloves, which offer maximum dexterity and wearing comfort, allow perfect control of weapons and are enhanced with the proven and advanced technology of the D3O® impact protection. The Target Combat is an extremely finger-sensitive and slim fit tactical glove that is equipped with the MoG/AX ® DexSuede and D3O ® impact technology. Main features :- Palm made of DexSuede - a very thin synthetic suede that offers maximum dexterity and dexterity.
- DexSuede also protects the user from 100-degree contact heat for 10 seconds.
- The fingertip stitched slim finger construction provides extremely high dexterity for perfect weapon handling, control of radios and delicate equipment
- Reinforcements on the trigger guard for more durability, dexterity and wearing comfort.
- 2 flexjoints on the index finger for maximum flexibility when handling weapons
- C-Grip construction improves the durability of your glove and protects the index finger from burns from the hot barrel of your gun.
- Thumb construction for reloading - reinforced thumb piece and specific design for perfect reloading of magazines.
- Reinforced patch on the heel provides extra strength against friction during use.
- Back hand made of 4-way stretch, durable, breathable and quick-drying fabric.
- D3O® knuckle protector with impact protection level 1 - covered with a double layer of Cordura® stretch for durability and abrasion resistance.
- Comfortable neoprene cuff with cut-out for watches - fits very well on the wrist for maximum freedom of movement at any time
- High-quality Velcro closure for adjustable fit covered with TPR, double stitched, prevents dust or sand traps
- Thumb, index finger and middle finger are touchscreen compatible thanks to the conductive suede patches
- Mixed silicone print for excellent grip on weapons, ropes, etc., but also on textiles, sweaty skin, ...
- Black
- Coyote Brown
- Wolf Grey
-
The Agilite Magnetix™ battle belt is designed to be the best combat belt system on the market, validated downrange in intense combat. Our goal was to eliminate all problems with existing combat belts. One of the biggest problems with combat belts is that it is difficult to align the upper and lower belts, especially under pressure. It can take multiple attempts to get a correct and comfortable fit, wasting valuable time. The Magnetix Battle Belt uses a patent-pending magnetic alignment system to ensure a perfect fit every time. Another big problem with combat belts is that you don't have a MOLLE right where you need it most, close to the buckle. The Magnetix™ Battle Belt has a full field from MOLLE to the buckle, regardless of your size. Many other combat belts sag, especially at the front of the belt. The unique design of the Magnetix™ Battle Belt ensures that the belt does not sag, even under heavy loads. One of the biggest problems with 2-piece combat belts is that the inner belt is always an afterthought. The Magnetix™ inner belt is designed to be the best inner belt on the market, to solve additional problems and to be a great everyday belt in its own right. The inner strap is optimized for CCW with a unique smart stiffening system that ensures the belt does not bend or wobble while carrying a firearm, but still bends when needed, for ultimate comfort. Many stiffened belts can be too stiff and uncomfortable. The Magnetix™ inner strap uses a range of composite materials that mold to your exact body shape over time. Most two-piece Battle Belt systems use safety buckles, but these are attached to materials with no safety rating or constructed in such a way that the belt is not given a safety rating. This means that the strap can never be safely used to be attached to an airframe. The Magnetix™ Battle Belt system is constructed to be fully ratification capable, and a classified version is available upon request. Every detail of the Magnetix™ Battle Belt system is designed to deliver two belts that give you an unparalleled advantage, whether you're defending your country at the tip of the spear, defending your community, or defending your home. Size chart
Specifications
- Magnetic alignment system for inner and outer belts
- 1000D CORDURA® Mil-Spec Tactical Nylon
- CURV® thermoplastic composite material
- Laser cut Squadron™ laminate
- COBRA® quick release buckle with D-ring
- Proven in battle in Israel
- 2 Harness system
- Tubular webbing
- 2 Inch Outer Strap
- 1.75 inch inner strap
- Full field from MOLLE to the buckle, no matter your size
- Fully customisable
- Molds to your exact body shape - Nominal version available upon request
- Magnetic alignment system for inner and outer belts
-
The CONDOR LCS Vector Gun belt is the latest addition to our family of load-bearing belts. With the first-of-its-kind magnetic buckle, the Vector is ideal for fast-paced, kinectic operations where every second counts. This durable belt is made from heavy-duty webbing and reinforced with an extra layer of scuba webbing to handle heavy loads. It helps distribute weight comfortably and keeps firearms and ammunition within reach. It's available in a number of classic colors to complement your uniform or gear and ensure discretion when needed. The exterior of the turret belt is made of our LCS material with non-traditional MOLLE slots to stabilize mounts and reduce weight. This versatile belt can be used in conjunction with an inner belt or as a standalone belt to meet your needs for any expedition or mission. It is equipped with a removable non-slip cushion on the inside so that it stays comfortably around your waist. Like the Condor LCS Cobra Gun Belt, this belt has a two-inch-wide webbing. Features- 2-inch wide strap
- 2-inch self-aligning magnetic buckle with side release
- Reinforced with scuba tape
- Laser-cut slots for modular accessories
- Removable anti-slip pad
- Can be used as a stand-alone duty belt or in combination with the hook inner belt as a two strap system
- Patent pending
- Imported
- X-Small/Small: 28.5" - 32.5" Belt Length, Waist 26"-28"
- Small/Medium: 34.5" - 38.5" Belt Length, Waist 30"-32"
- Medium/Large: 40.5" - 44.5" Belt Length, Waist 34"-36"
- Large/X-Large: 46.5"-50.5" Belt Length, Waist 38"-40"
- X-Large/XX-Large: 52.5" - 56.5" Belt Length, Waist 42"-44"
-
While natural foliage is the ultimate helmet camouflage, a bushy cover with a 3D effect might be the next best thing. Quick and easy to use, easy to customize. They effectively break up helmet silhouettes and provide quick camouflage adjustment to suit different environments. The design is very simple, a single flat piece of 500D Cordura with alternating zigzag shapes cut into it. The zigzag pattern is positioned in such a way that it creates an opening for NVG mounts on the front. Small slits have been cut around the edges for the elastic cord. Thread the elastic cord through the slits, tie it at the back, and pull it over your helmet like a shower cap. Finish it off by pulling back any excess material and rolling it underneath yourself to tighten the cover. If you want to adjust the fit, you can play around with threading the elastic cord through the slits and zigzag pattern in different ways. And if you get really wild and feel the need: you can even cut off excess material from the cover, but of course, such huge adjustments are at your own risk. KEY FEATURES- 3D Effect Camouflage Plate for Helmets
- One-size-fits-most, best suited for high-cut L and XL helmets
- Lightweight Laser Cut 500D Cordura
- Quick and easy to apply and remove
- All color options offer good NIR performance
- 2-year material and product warranty
- Gemaakt in Finland
- Weight (in retail container): 65 g
- Dimensions (in retail packaging): 10 x 15 x 4 cm (W x L x D)
- Fabric: 500D Cordura (100% polyamide)
-
Soft polymer magazine holder with MOLLE attachment for a 5.56 magazine. Can be attached to a belt or to the MOLLE loops on a patrol vest or combat bag. The holder can be attached both up and down. Compatible with FAMAS, HK416 and AR15 magazines. -
Not in stock - on order
The Gripper Slip-On Grip from Pachmayr has a unique design and contour, allowing it to fit a wide range of popular medium to large pistols. The Gripper Slip-On has an attractive non-slip texture and palm bulges for better fit and control. The contoured cutting lines allow you to adjust the grip to fit your gun. Perfect for Glock and other polymer frame pistols. Caution: Do not use on handguns with a safety catch.- Optimal size for a wide variety of pistols.
- Can be cut to size and has contoured cutting lines for a clean, even cut.
- Comfortable finger grooves provide better control.
- The back of the finger grooves is recessed so that they can be used on pistols with or without finger grooves.
- Non-slip texture and bulges in the palm for perfect fit and control.
- The Gripper is made of abrasion-resistant rubber and is insensitive to weather, sweat, oil and solvents.
- Perfect for Glock and other polymer frame pistols.
- Glock 19, 23, 25, 32, 38, and 17, 20, 21, 22, 31, 34, 35, 37
- S&W M&P Full Size & Compact, M&P M2.0 Full Size & Compact
- S&W Sigma, SD, SD VE
- Sig 226, 228, 229, P320 Full & Compact Ruger SR9, 22/45
- Beretta 92, 96
- CZ 75, P-07
- Walther P99
- Hi Point 380/9mm/40/45 Browning Hi-Power H&K USP
-
This duty holster is designed for the Glock 17 Generation V. It is made of Level 5 injection molded polymer. It is specifically designed for law enforcement officers to wear with their duty uniform. It is equipped with 5 safety latches, making it extremely safe for officers. The weapon is easy to draw and safely holster. The internal retention of the weapon is removed by simply pressing the release pedal with the thumb when you grip the grip (Evolock system). The same pressure on the release pedal automatically tilts the sling forward (Rotoloop system). This holding mechanism automatically snaps back into place when the weapon is encased under its own weight. The sling bar can be manually brought back to the top of the weapon by pulling it with your strong hand. It is equipped with an anti-retraction tab at the front (Roto Guard system). A screw controls the retention force of the weapon, while a 2nd screw adjusts the height of the trigger guard. (STR system). A casing reinforces the contour of the base of the trigger guard to prevent unintended pressure on the magazine printer. A backplate to isolate the weapon's release button (BS-PRO system). It is equipped with 3 screws in a 120° triangle and allows the holster to be rotated on different MULTILINK II version RADAR supports (Low, High, Medium offset, Thigh plate, Multi-brand adapter and Soft Passing Claw). It is available in a right- and left-handed version and is black in color. It can be worn on the belt, but also on the thigh plate and the Molle system. It comes with a 3x120° S-Closer belt offset (RAD-6500-6106). Features- 5 retention levels
- Evolock-S & Rotoloop-S 2-grease automatic safety devices
- STR System Screw Fixing
- BS-pro skid plate
- Protective plate for push-button charger
- Roto Guard anti-pull tab at the front
- LTILINK 2 port system for optional accessories
- Available in right- or left-handed version
- Color: black (059)
- Made of injection-molded polymer
- Includes S-clamp 3x120° (6500-6106)
- Glock 17 Gen 5
- RADAR support
- RDC Disc Fuselage RAD-6502-0017
- SFL fork RAD-6505-0026
- RSS fork RAD-6507-0017
- UBM lower belt offset RAD-6500-6506
- Lower belt offset RAD-6500-6306
- Medium Belt Loop RAD-6500-0956
- Combined T-System Paddle RAD-6500-0046
- Rigid Claw Soft Loop RAD-6500-1187
- Rigid Soft Double Loop RAD-6500-1197
- And RADAR adapter for police and Blackhawk thigh plates
-
The ESS InfluxTM military goggle virtually eliminates lens fogging and thus ensures that troops remain fully aware of their situation in dynamic tactical environments. As part of the goggle's patented AdjustableVentilation SystemTM (AVSTM), the Influx RotoClipTM silently rotates the position of the lens in the frame of the goggle: choose between a dust-free, fully sealed mode or a fog-free, open-ventilation mode. With InfluxTM, troops can always see clearly and act quickly when seconds count. The RotoClipTM not only controls the AVSTM, but also enables one of the fastest lens change systems ever used in a pair of glasses. Operators can quickly and easily switch between different lens tints, allowing them to adapt more quickly to the environment and reduce the amount of time they need to work. Combined with a host of other major improvements, the InfluxTM is ready to break through the fog of war and clear the way to victory. Specifications- Patented Adjustable Ventilation SystemTM (AVSTM) provides
- Unrivalled anti-fog ventilation & full perimeter dust filtration
- Low profile, suitable for night vision with wide field of view
- Anti-microbial OpFoamTM face padding increases comfort and fit
- Advanced ESS ClearZoneTM FlowCoat lenses prevent fog on the inside and prevent scratches on the outside
- Quick-release strap twists for optimal helmet compatibility
- Interchangeable 3.0mm High Impact Polycarbonate Lenses
- Distortion-free optics & 100% UVA/UVB protection
-
Not in stock - on order
The Lowa Zephyr MK2 GTX HI is a mission boot with the ideal balance of maneuverability, lightness and stability. The HI-CUT upper provides the support needed during skydiving and fast roping. The upper is made of a combination of water-repellent, tear-resistant suede and abrasion-resistant, breathable CORDURA® material. An innovative locking hook makes it possible to adjust the laces individually at the forefoot and ankle. The waterproof, highly breathable GORE-TEX Extended Comfort laminate is ideal for use in temperate or relatively wet environments. The double-layer PU midsole with a MONOWRAP® frame surrounds and supports the foot like an exoskeleton. The ZEPHYR MK2 GTX HI is certified as a work footwear according to EN ISO 20347:2012. It is antistatic and has a cold and heat-insulating sole. The outsole is not only non-slip - it is also resistant to oil, gasoline and contact heat. GUARANTEED PROTECTION AGAINST THE WEATHER - EVEN IN HOT TEMPERATURES. GORE-TEX Extended Comfort Footwear Guaranteed protection against the weather, even in hot temperatures: The ZEPHYR MK2 GTX HI is equipped with a GORE-TEX Extended Comfort footwear membrane. The innovative technology offers optimal waterproof protection and breathability. Permanently waterproof The membrane provides reliable waterproof protection. No matter what kind of activity you're planning, you can count on GORE-TEX technology to keep your feet pleasantly dry. High breathability GORE-TEX shoes are designed with optimal breathability in mind and are a joy to wear even in intense activities and hot weather. Water cannot enter the shoe, and moisture produced in the shoe escapes through billions of pores in the GORE-TEX membrane. Windproof The GORE-TEX membrane reliably repels wind and weather. This allows you to go on the road, regardless of the weather. LACING WITH TWO ZONES, SO THE SHOES FIT WELL Thanks to the two-zone lacing system used in the ZEPHYR MK2 GTX HI, the forefoot and upper have their own separately adjustable lacing zones. This allows the shoe to be individually adapted to the anatomy of the foot and strung in different ways for climbs and descents. DOUBLE INJECTION, UPPER AND SOLE BECOME A FIXED UNIT For effective cushioning and increased comfort, the sole of the ZEPHYR MK2 GTX HI is attached to the upper in a technically demanding injection process. The upper is placed in a specially designed mold. Then several layers of PU foam are poured into it. During this process, the sole and upper material are fastened together. Lightweight For this process, a plastic called polyurethane is used. It is a very light foam filling. Damping The plastic polyurethane is a foam filling with very good damping properties. The plastic retains its shape and bounces back to its original state, even when the millions of small bubbles are often pressed together. This, in turn, creates a good rebound effect. A wide range of design options Thanks to direct injection, the sole can be designed in a very large number of ways. Due to the versatile properties of the materials used, the shoes can be effective in a large number of areas. STABLE FRAME With the LOWA-MONOWRAP® frame, the midsole of the ZEPHYR MK2 GTX HI offers the very best comfort. This three-dimensional design of the midsole was developed by LOWA in 1995. The frame cradles the foot comfortably and supports it when the wearer of the shoe ventures over uneven surfaces. The sole design is slightly raised for shoes with a STABILITY FRAME. Good conductivity of the foot The foot fits optimally in the shoe thanks to the three-dimensional design of the frame. Increased comfort The special design of the midsole ensures that the foot fits well in the shoe. The foot is pleasantly cradled by the three-dimensional frame. Lightweight The LOWA-MONOWRAP® is made of a plastic called polyurethane. It is a very light material. -
Expand your tactical gear set with the Agilite Scorpion Patch. Agilite Scorpion patches are available in Ranger Green and Wolf Grey. -
- 1x Adaptive Rig System Split Rig setup with Tango modules
- 1x ARS butt pack
- 2x Grand GP
- 2x Double mag pouch
- 1x L4P x EURMED IFAK insert
-
Made of X-Pac - a high-quality light, durable, highly abrasion-resistant, tear-resistant, waterproof with aramid reinforced Cordura material. NIR compliant. DWR. Weight 313 g Ultra-light chest harness with fixed pocket. 4 double mag pouches for two each 5.56 or 7.62x39. Two large GP pockets and MBITR/nalgene pockets behind GP pockets. Upgrade your ULWCSIG with our Adaptive Rig System Bravo yoke, L4 x EURMED IFAK insert, TQ pocket and frag pockets. Content for illustrative purposes only, NOT included!
