Airsoft Archieven

Agilite K-Zero Plate Carrier

€289,95 – €304,95
The K-Zero Plate Carrier is the most comfortable low plate carrier on the market. It is the only plate carrier designed directly in collaboration with both the Israeli and American Special Forces to solve all the problems with comfort and functionality of modern plate carriers. In the last decade, the desire to give plate carriers a lower profile has made them increasingly uncomfortable. The K-Zero has just as little profile, but is built to be significantly more comfortable, whether worn fully armored or for days. The Agilite own V design divides the weight over 8 different suspension points so that there are no hot spots. Strategically placed low profile closed cell padding gives you an unprecedented amount of comfort, without adding bulk or interfering with your stock weld. The K-Zero comes with a one-size fits all low profile cummerbund, so you can guarantee a perfect fit and adjust it yourself even while wearing it. It's incredibly versatile. On the front, you can switch between Velcro or quick releases, depending on your mission. It has both internal and external mounting options and stretch that doesn't detract from the space on your rear plate bag. For even heavier loads, the K-Zero is compatible with the Agilite Warfighter Cummerbund or another hook and loop-based cummerbund. With other plate carriers, cable management is at best an afterthought. With the K-Zero, it has been incorporated into everything from the start. It comes with an included cable management kit. This gives you complete versatility and the ability to set up your cables, ptts and hydration tubes exactly the way you want. The K-Zero gives you the kind of benefits that can only be gleaned through experience in the highest levels of combat in an area of the world that still performs operations every night. Whether you're defending your country on the cutting edge, defending your community, or defending your home, the K-Zero gives you an unparalleled edge. Sizing: The K-Zero has a one-size fits all cummerbund and fits perfectly to all body types and sizes. All you need to adjust is the plate pocket so that it fits the armor plates you want to put in it. Size Medium: This size fits most plates including 10x12, SAPI Medium or smaller. Size Large: This is for SAPI Large plates or other large plates up to 10.30"x13.25". *Plate bags fit all plate cutouts including: SAPI, ESAPI, Shooters Cut and Swimmers Cut. Specifications:

500D CORDURA ® Mil Spec Tactical Nylon

Own Mil Spec hardware

Kevlar® coated neoprene

Laser cut Squadron™ laminate

Laser cut Velcro ® MOLLE overlay panels

Integral comfort foam with closed cells

Weight: 0.79 kg

Details:

Most comfortable low plate carrier on the market

Suitable for placards

Patented "V" design distributes weight over a maximum surface area from the shoulders to the center of the mass to avoid pressure points.

Strategically placed low profile with closed cells gives you an unprecedented amount of comfort, without adding bulk.

One-size fits all low profile cummerbund included, so you can guarantee a perfect fit and customize it yourself while wearing it.

Cummerbund allows you to switch between Velcro flaps or quick release buckles (quick release buckles not included).

Looped tailgate is compatible with the Agilite Warfighter Cummerbund or any other Velcro-based cummerbund.

Built-in cable management elements in shoulders and front and back plate pocket.

Free cable management kit included.

Compatible with AMAP III Assault Pack.
Select options Details
Agilite K19 plate carrier

€294,95 – €304,95
Version 3.0 The K19 is the ultimate modern plate carrier. Designed, tested and proven in battle in Israel and behind enemy lines with some of the IDF's most elite units. The K19 has many subtle but revolutionary features that no other plate carrier has. When it comes to the belly band, we have thought of everything. Many modern plate carriers now use quick release mechanisms, but they always come at the expense of not being able to easily adjust the fit. The K19 uses our Egress™ Quick-release system and patented Fast-Adjust™ Cummerbund that can be adjusted and refined by the wearer in real time. Getting the perfect fit can depend on your specific mission gear, what you're wearing underneath (which can change halfway through the mission), or even how much you ate for lunch. We know that the ability to customize it yourself, on-the-fly, is critical to avoid unnecessary fatigue and impaired combat awareness. The K19 has a one-size-fits-all belly band and multi-size plate bag, eliminating the need to make complicated and risky size choices when buying. You know it will always suit you or members of your team, regardless of your gear or mission set. This is also important for procurement professionals who can be sure that it is a good fit for all their boys (or girls). The quick-adjustable belly strap also has a built-in stretch element that allows the vest to be pulled nice and tight so it doesn't bounce when you run, but that gives you that inch or so of stretch needed when you fall on a knee so the wearer doesn't flatten their torso. The latest version of the K19 is also compatible with placard, with both upper attachment points and a new laser-cut loop overlay. This new layer gives you the best of all worlds. It allows you to either directly add velcro placards, or use the mil spec, bartacked molle underneath to attach ordinary molle bags. Unlike other carriers, the quick-release fasteners in the shoulder area are placed far back so they don't interfere with your rifle stock and are still easily accessible. When it comes to comfort, the K19 shares many of the comfort features of the battle-proven Agilite K5, which is considered the most comfortable plate carrier on the market. Such comfort features include a generous melting foam shoulder pad for extreme comfort even with prolonged use. Anyone who has spent time in the military knows that even the shortest missions can culminate in multiple day operations. Comfort is not a luxury, it is a necessity to stay alert and not be distracted in hostile environments where complacency can cost you your life. One of the secrets of the K19's comfort level is that the shoulder straps create a patented "V" shape for the mass that distributes the weight over the maximum surface and relieves the pressure points. The back of the K19 plate bags has a triple layer of low-profile fusion foam to stay comfortable even when using the K19 with hardened steel or ceramic armor plates. Steel or ceramic plates often have hard corners and edges that can dig into your hull when using regular plate carriers, but the K19 has inherent padding to prevent this. The K19 is also compatible with the Agilite K-series, which means it has the ability to attach the AMAP III Assault package directly to it within seconds. No getting MOLLE, no hassle. At the back, the belly strap has numerous attachment points for the mil-spec G hooks, allowing a perfect fit for everyone, from the largest to the smallest person, without making the plate carrier unnecessarily large or prohibitively small. The K19 has grown from the front lines of the Israeli Special Forces to one of the best-selling plate carriers in the US. It has traveled many miles and crossed borders to some of the most dangerous places in the world to bring you one of the most detailed and thoughtful plate carriers on earth. Details

Integrated Egress™ Quick-release system

Patented one-size-fits-all Fast-Adjust™ Cumberband that can be adjusted by the wearer in real time.

Shoulder exit buckle are positioned backwards so that they do not interfere with the placement of the rifle stock

One-size plate bag with internal controller to fit perfectly on all common board sizes (SAPI S, M or L-see size chart for exact details).

One-Size-fits-all belly band-no risks or size decisions to be made during purchase-fit for very small-very large people.

Suitable for plates

Administration pocket with zipper at the front

Fusion foam shoulder pad for long-term comfort

Patented "V" design distributes the weight over the maximum surface area of the shoulders to the center of the mass to avoid pressure points.

Rear tow lever

Skeletal shoulders for communication and drinking tubes

Laser-cut Velcro panels front and rear

Agilite K Series™ compatible

Designed, tested and proven in battle in Israel

Specs

1000D CORDURA® Mil Spec Tactical Nylon

Mil Spec polymer buckles and hardware

Egress™ Quick-release system and patented Fast-Adjust™ Cumberband.

Laser cut Velcro MOLLE overlay panels

Fits any size S, M or L SAPI/ESAPI plates up to 1.5 inches thick

Fits all 10" X12" plates

Dimensions chest panel with Velcro: 25cm*9cm (9.8" x 3.5")

Laser Engraved Mil Spec Polymer Cord Pullers

Weight: 2.5 lbs (1.1 kg) including Fast-Adjust Cummerbund™
Select options Details
Agilite Magnetix™ Battle Belt

€207,95 – €218,95
The Agilite Magnetix™ battle belt is designed to be the best combat belt system on the market, validated downrange in intense combat. Our goal was to eliminate all problems with existing combat belts. One of the biggest problems with combat belts is that it is difficult to align the upper and lower belts, especially under pressure. It can take multiple attempts to get a correct and comfortable fit, wasting valuable time. The Magnetix Battle Belt uses a patent-pending magnetic alignment system to ensure a perfect fit every time. Another big problem with combat belts is that you don't have a MOLLE right where you need it most, close to the buckle. The Magnetix™ Battle Belt has a full field from MOLLE to the buckle, regardless of your size. Many other combat belts sag, especially at the front of the belt. The unique design of the Magnetix™ Battle Belt ensures that the belt does not sag, even under heavy loads. One of the biggest problems with 2-piece combat belts is that the inner belt is always an afterthought. The Magnetix™ inner belt is designed to be the best inner belt on the market, to solve additional problems and to be a great everyday belt in its own right. The inner strap is optimized for CCW with a unique smart stiffening system that ensures the belt does not bend or wobble while carrying a firearm, but still bends when needed, for ultimate comfort. Many stiffened belts can be too stiff and uncomfortable. The Magnetix™ inner strap uses a range of composite materials that mold to your exact body shape over time. Most two-piece Battle Belt systems use safety buckles, but these are attached to materials with no safety rating or constructed in such a way that the belt is not given a safety rating. This means that the strap can never be safely used to be attached to an airframe. The Magnetix™ Battle Belt system is constructed to be fully ratification capable, and a classified version is available upon request. Every detail of the Magnetix™ Battle Belt system is designed to deliver two belts that give you an unparalleled advantage, whether you're defending your country at the tip of the spear, defending your community, or defending your home. Size chart Specifications

Magnetic alignment system for inner and outer belts

1000D CORDURA® Mil-Spec Tactical Nylon

CURV® thermoplastic composite material

Laser cut Squadron™ laminate

COBRA® quick release buckle with D-ring

Proven in battle in Israel

Details:

2 Harness system

Tubular webbing

2 Inch Outer Strap

1.75 inch inner strap

Full field from MOLLE to the buckle, no matter your size

Fully customisable

Molds to your exact body shape - Nominal version available upon request

Magnetic alignment system for inner and outer belts
Select options Details
Agilite Micro Map

€165,95 – €177,95
The Agilite Micro MAP is a rear attack panel that attaches to any plate carrier and gives it a compact, extremely versatile, extra layer of storage and capabilities without extra bulk. It has been developed for units that carry out short missions, often in small spaces, and that require a high level of performance and diverse capabilities in an exceptionally compact package. Attaches to ANY plate carrier with MOLLE on the back and does not require its own zippers or other mounting systems (including the Agilite K-Zero and K19 plate carriers). Unlike other back panels that can only hold 1.5 liters of water, the Micro MAP can carry a full 3 liter hydration layer. Optimized for the Agilite 3 Liter SAPI Hydration Bladder - the first tactical hydration bladder designed specifically for SAPI Plate Carriers. The unique shape of the bladder maximizes the space available for carrying 3 liters of water, while still keeping the bladder in a low profile and non-intrusive. The Micro MAP features a stowable beavertail that expands the carrying capacity and can accommodate a wide range of additional gear, including helmets, clothing, and more. The beavertail has a fold-down flap for additional tools, such as a bolt cutter, rifle, and other items. Includes a full pass-through function for even longer items. Two built-in administration pockets for convenient storage of smaller items. Integrated cable management channels for organizing all your cables, without snagging. Whether you're on a mission or responding to a threat, the Micro MAP ensures that your entire gear and support system is at your fingertips. Sizing The Micro MAP fits ANY Plate Carrier with MOLLE on the back. Specs

500D & 1000D CORDURA® Mil Spec Tactical Nylon

Mil Spec tyres

YKK Zippers

Main compartment volume - 3 liters

Max. volume beavertail - 8 liters

Weight: 0.6 kg

Dimensions: 35cm*28cm (13.7" x 11")

*Plate carrier, contents and hydration blatter for illustrative purposes only. Sold separately.
Select options Details
Agilite Warfighter™ Cummerbund

€137,95 – €149,95
The Warfighter™ Cummerbund is the most advanced semi-rigid cummerbund plate carrier on the market. It was designed in collaboration with both Israeli and U.S. Special Forces to solve all comfort and functionality issues with load-bearing cummerbunds. Compatible with any plate carrier with hook and loop surfaces, including the K-Zero Plate Carrier and the K19 Plate Carrier (2.0 and 3.0 versions) with the Cummerbund MOLLE back flap adapter. Most stretch cummerbunds sag under the weight when wearing heavy gear such as radios and sideways armor. The Warfighter Cummerbund is semi-reinforced to support heavy loads, stretches for comfort and maneuverability, but will never sag, even under heavy loads. Allows you to quickly and easily switch between Velcro flaps, quick-release fasteners or FirstSpear Tubes®, on both sides, so you can adjust your cummerbund exactly the way you want it. Equipped with three rows of MOLLE, for maximum mounting possibilities, both internally and externally. Despite this, it retains a lightweight, skeletal design that ensures maximum airflow and keeps you cool under fire. The Warfighter Cummerbund is compatible with the K-Zero Plate Carrier without the need for accessories or modifications. It is also compatible with the K19 Plate Carrier by adding only the modular MOLLE flap on the back. It is compatible with Agilite Flank™ hard sideways armor carriers and all other common sideways armor, radios, pouches and more. Whether you're defending your country on the tip of the spear, defending your community, or defending your home, the Warfighter cummerbund will give you an edge. *Compatible with K19 Plate Carrier by adding Cummerbund Backflap Adapter. Specs Compatible with FirstSpear Tubes® and other quick-release fasteners Dimensions: M: 57*14*1cm(22.5*5.5*0.5 inches) L: 25*5.5*0.5 inches (64*14*1cm) XL: 28*5.5*0.5 inch(72*14*1cm) Weight: M: 126gr L: 140gr XL: 152gr Materials:

Laser cut Velcro overlay panels

Laser cut Squadron™ laminate

500D CORDURA® Mil Spec Tactical Nylon

CURV® thermoplastic composite material
Select options Details
Agilite retractor side plate carriers

€89,95
Agilite Retractor ballistic side plate carriers allow you to add additional ballistic protection to your installation to give you extra vital organ protection when used in high threat environments. They can be connected to ANY MOLLE Cummerbund or other MOLLE platform, not just Agilite platforms, and are lightweight, wear-resistant and intelligently designed to be the only side plate carriers you will ever need. The unique Israeli design ensures that a standard Special Forces 6 "X6" plate fits perfectly, but also expands directly to fit a 6"X8" Infantry issued plate, just a sine if you have missions that require extra coverage or if that's all you have access to during a deployment. Designed, tested and manufactured in Israel, they fit into SAPI. ESAPI or other common ballistic side plates up to 1 inch thick. Retractor side plate carriers can also be used to hold non-ballistic training plates to prepare you for the front lines and make your Crossfit or other training session more serious and challenging. Note: Side plate carriers with retractor are non-ballistic and are not export restricted - they are only a carrier platform for ballistic side plates. Specs:

Mil Spec 1000d tactical nylon

Includes Agilite polymer handle

Made in Israel
Select options Details
Agilite Flank Side Plate Carriers

€88,95

Side plates are vital to staying alive in a gunfight, but are often bulky and clunky. The Agilite Flank™ side plate carriers ensure that your side plates have a low profile, are comfortable and integrate seamlessly with your Plate Carrier. - Incredibly low profile and lightweight for maneuvering in tight CQB environments - Fits 6"X6" or 6"X8" side plates - Can be mounted both internally and externally via MOLLE low-profile mounting - Integrated low profile rib cage to prevent chafing - Compatible with all MOLLE Cummerbunds including the K-Zero Plate Carrier (internal mount), K19 Plate Carrier (external mount) and WarFighter™ Cummerbund. Sizing - Fits 6"X6" or 6"X8" side plates (including Blindside™ side plates) - Compatible with the following Agilite platforms: K-Zero plate carrier (internally mounted) K19 plate carrier (externally mounted) Warfighter™ garter (internally mounted) **FLANK™ SIDE PLATE CARRIERS ARE SUPPLIED IN PAIRS** Dimensions: 7*6.5*8 inch(18*17*20cm) Weight: 90gr Materials: - Laser cut Velcro overlay panels - 500D CORDURA ® Mil Spec Tactical Nylon *plate carrier not included, for illustrative purposes only.

Select options Details
Not in stock - on order
Agilite Pincer Placard

€83,90 – €97,95
The Agilite Pincer Placard™ is an elastic placard with hook backing that can hold three 5.56 magazines. Thanks to the revolutionary, patent-pending funnel-shaped magwell design, you can grab or re-index a warehouse with just one hand, while still maintaining a rock-solid retention so your magazines never fall out. Elastic warehouse bags are popular because of their easy access and low profile. However, they all have 1 of the 2 flaws: Either they are too closed, so it is almost impossible to re-enter a warehouse with 1 hand. Or they're too loose for you to reposition a magazine, but you have to worry about it falling out because of unreliable retention. The Pincer Placard™ solves both problems and gives you the best of all worlds. The patent-pending funnel-shaped magwells guide your magazines into the bags, so you can re-insert a warehouse with just one hand without any problems. Despite this possibility, the forceps pockets still hold the magazines tightly, so you never have to worry about losing them. The Pincer Placard™ comes standard with both MOLLE placard buckles and G hooks and has a built-in height adjustment capability so that it fits not only on Agilite plate carriers, but also on any placard-compatible plate carrier and instantly gets a perfect fit. It also has laser-cut loops on the side for attachment to common chest harness systems. The base of the Pincer placard is made of laser-cut Mil-Spec Squadron material that allows water drainage but covers the ends of your magazines to protect them from dust, dirt, and wear that can cause weapon failure. The Polymer magwells give elastic pouches long-lasting reliable retention and superior durability where they normally fall apart. While not required, the Placard also has a loop interior, so you can add Agilite Jump Retention tabs if your unit's regulations require for skydiving, rotating or maritime operations or if you just want to add an extra layer of retention. They include Agilite's patented AG™ technology with polymer pull tabs, so even when applied, they give you unhindered one-handed access to your magazines. Whether you're defending your country on the tip of the spear or defending your family, the Agilite Pincer Placard gives you an edge. Details:

Suitable for three 5.56 warehouses

Magazine bag with brackets for plate carriers

Patented funnel-shaped warehouse tubes guide the warehouse to the optimal insertion point, so the magazine doesn't get stuck and can be re-indexed quickly

Polymer magwells give elastic pouches long-lasting reliable retention and superior durability

Attaches to any Agilite or other plate carrier or backpack in seconds

Built-in ability to adjust the height for perfect positioning of the plate carrier

Compatible with both G Hook and Placard Buckle (both included with the product)

Allows the warehouse to be quietly picked up or reinserted

Designed, tested and tested in battle in Israel

Specifications:

Suitable for three 5.56 warehouses

Weight: 181 grams

Dimensions: 25cm*9cm (9.8" x 3.5")

Patent pending durable polymer magwells

Patented mil-spec G hooks

Including mil-spec polymer MOLLE Placard buckles

Laser-cut Squadron mil-spec laminate fabric

Size: The Pincer Placard fits on any plate carrier that is suitable for placards and is equipped with both G-Hooks and MOLLE placard buckles. The Pincer placard is built for three 5.56 warehouses and can also be used for similar or smaller items. Hook and loop chest pan dimensions: 25cm*9cm (9.8" x 3.5") FAQ: Q: Does this fit on my Plate Carrier ? A: The Pincer Placard can be attached to any Agilite or other plate carrier or backpack in seconds. Q: What caliber of magazines does the Pincer Placard fit on? A: The Pincer Placard™ only fits 5.56, AR-15 style magazines Q:Is this pouch also available in the singular? A: At the moment, the pincer placard is only available as a triple mag pouch Q:Do I need Jump Retention Tabs for the Pincer Placard? A:Only if your unit's regulations require them for skydiving, rotating or maritime operations or if you just want an extra layer of retention. If you put other items in the bag in addition to the 5.56 magazines, you can use them for additional retention. Q: Do items other than 5.56 warehouses fit in the pincer? A:Yes, it is intended for 5.56 magazines, but other objects of similar size can also fit in it, for example flashlights. For other items you can add the Agilite Jump Retention tabs
Details
Agilite Team Wendy Exfil Ballistic/SL Helmet Cover

€82,95
The Agilite Team Wendy Helmet Cover protects the ballistics and lacquered surface of your Team Wendy Exfil helmet, extends its life and gives you full accessory management. It fits the Exfil shell like a glove and is suitable for all rail types (both rail 2.0 and Rail 3.0). Two foldable tabs on the side fold in for the Rail 2.0 and out for the Rail 3.0, so that both fit perfectly. Unique features of the cover include the left and right cable management channels, smooth, snag-free sides and an upper bungee accessory management area for IR flashes, cameras and more that features mil-spec polymer holders with laser-engraved Agilite scorpions. The Agilite Team Wendy Exfil Ballistic cover is easy to apply or remove in seconds. It is made from durable mil-spec materials and is designed, tested and manufactured in Israel. A Berry Compliant version is also available for bulk orders on demand - For details, email us. Details Fits all Team Wendy Exfil Ballistic helmets, including:

Team Wendy Exfil Ballistic with Rails 2.0 or 3.0.

Team Wendy Exfil Ballistic SL with Rails 2.0 or 3.0.

Next generation lower profile central bungee retention for IR flashes, cameras etc.

Integrated cable management channels

Full spectrum, rock-solid accessory platform

Easy installation - can be mounted on the helmet in seconds

Specs

Weight: 5oz (143g)

1000D Tactical Nylon

Flat Polyester Mesh 380g/m2

Laser-engraved polymer bungee channels

Rear loops for AA and CR123 NVG batteries

Made in Israel

! ATTENTION! REAR POUCH, HELMET AND ACCESSORIES NOT INCLUDED !
Select options Details
Agilite Team Wendy EXFIL Bump LTP/Carbon Helmet Cover

€81,95

The Agilite Team Wendy Helmet BUMP Cover protects the integrity and painted surface of your Team Wendy BUMP helmet, extends its life and gives you full accessory management. It fits like a glove on the Exfil shell and is suitable for both the Exfil Carbon and the Exfil LTP helmets, so you have a perfect fit for both. Unique features of the cover include the left and right cable routing channels, smooth, zipper-free sides and an upper bungee accessory management area for IR flashes, cameras, etc.dat features mil-spec polymer holders with laser-engraved Agilite scorpions. The mesh portion of the cover is strategically placed to allow free airflow into the helmet's ventilation holes and keep you cool within range. The cover also has an exit at the back, so the Team Wendy Exfil rear 'V' shaped shock cord can be removed and used even when the cover is on. The cover also extends over and protects the front lip of the helmet, which is a vulnerable spot and usually the first spot where the paint peels off. The Agilite Team Wendy Exfil BUMP cover is easy to apply or remove in seconds. It is made from durable mil-spec materials and is designed, tested and manufactured in Israel. A Berry-compliant version is also available for bulk orders on request. Sizing - Team Wendy EXFIL Bump LTP/Carbon helmet cover available in 2 sizes: M/L and L/XL - Fits all Team Wendy Bump Helmets Including: - Team Wendy Exfil Carbon (Rails 2.0 & 3.0) - Team Wendy Exfil LTP Helmet ((Rails 2.0 & 3.0) Specs Weight: 5oz (143g) - 1000D tactical nylon - Flat Polyester Mesh 380g/m2 - Laser engraved polymer bungee channels - Back loops for AA and CR123 NVG batteries - Made in Israel Details - Fits all Team Wendy Bump Helmets Including: - Team Wendy Exfil Carbon (Rails 2.0 & 3.0) - Team Wendy Exfil LTP Helmet (Rails 2.0 & 3.0) - Agilite precise fit - Next generation lower profile central bungee retention for IR flashes, cameras etc. - Integrated cable management channels - Full spectrum, rock-solid accessory platform - Easy installation - can be mounted on the helmet in seconds ATTENTION: Rear pouch not included. You can order it separately here.

Select options Details
Agilite Bridge-Tactical Helmet Accessory Platform

€79,95
The Agilite Bridge is the most advanced and versatile helmet accessory system on the market. It is a one-size, fits-all tactical helmet accessories platform that is designed to fit almost all common tactical helmets and almost all common helmet accessories, including NVG battery packs, counterweights, IR strobes, cables, flags and more. The Bridge uses the existing Velcro layout on modern military helmets to create a rock-solid accessory platform to prevent loss or damage. It comes with two wing size options to get the perfect fit on any tactical helmet, regardless of shape or size. The Bridge has a new generation central bungee retention for the same ability to clamp accessories, but with a new design with Mil-Spec, laser engraved polymer channels for zero hooks, a lower profile and improved retention. The back of the bridge is incredibly unique. It features a universal pod that expands and shrinks both vertically and horizontally to perfectly accommodate all common NVG battery packs, including those of the GPNVG-18, AN/PVS-31, AN/PVS-23, F5050, AVS-6 and ANVIS9. The pod has strategically placed outputs for all cable outputs and power switches. The exterior features semi-rigid polymer protection to prevent damage to the battery holders when the helmets fall or are bumped. The universal rear pod can also be squashed when not in use. The rear pod is so versatile that it can accommodate all common counterweights and battery boxes, but also offers the possibility to use undesignated objects that you already carry with you, such as radio batteries, as a counterweight. The rear pod also has elastic loops for storing AA or CR123 NVG batteries and the ability to store Comms PTT and other cables when not in use. The bottom has shock cord loops that make it possible to store the PTT cables when not in use so that they do not dangle. Unlike other helmet mounts that are only on the outside of the helmet, the back of the Bridge has loop lips that grip into the helmet's internal Velcro loop, greatly strengthening it at the back. The front "wings" lock the front of the bridge, creating a rock-solid platform. The bridge is manufactured in Israel and is designed based on input from our own team and SOF Operators in Israel, the US and other countries. Attributes

One Size System - fits all common tactical helmets

Universal rear pod for all common battery packs/counterweights

Patented rear pod provides impact protection for battery packs.

Output holes for all common NVG battery cables/switches

New generation central bungee mount for IR flashes, cameras etc.

Integrated cable management channels

Velcro pattern inside and outside the helmet for a rock-solid accessory platform

Easy installation - can be applied to the helmet in seconds

Available in Coyote Tan, Ranger Green, Black and other colors on request.

Specifications

Weight: 5.34oz (152g)

Supplied with 2 wing sizes as standard for a perfect fit.

Mil Spec materials and polymer hardware

Laser-engraved polymer bungee channels

Own universal rear pod and next gen central retention

Rear loops for AA and CR123 NVG batteries

Made in Israel

**Female helmet Velcro not included** **Helmets and/or accessories not included, for illustrative purposes only**
Select options Details
Not in stock - on order
Agilite Mtek Flux Helmet Cover Gen4

€79,95
The Agilite Gen4 MTEK Version is a new generation helmet cover that fits the MTEK FLUX helmet like a glove and offers it new, advanced functionality and universal accessory management. It uses a new versatile rear flex cell that fits all common NVG battery packs, counterweights and has strategically placed output holes for all cables. The semi-rigid exterior of the cell provides additional protection against impact rear accessories and has a central loop for ID patches. The Gen 4 helmet cover ensures uniformity in color or camo, protects the painted ballistic surface of the helmet and serves as a rock-solid platform that secures all accessories, preventing loss or damage. Details

Fits the MTEK FLUX Ballistic, MTEK FLUX Carbon

Agilite precise fit

Patented rear cell provides impact protection for battery packs.

Output holes for all common NVG battery cables/switches

New generation central bungee mount for IR flashes, cameras etc.

Integrated cable management channels

Full spectrum, rock-solid accessory platform

Easy installation - can be mounted on the helmet in seconds

Specs

Weight: 5oz (143g)

1000D Tactical Nylon

Flat Polyester Mesh 380g/m2

Laser-engraved polymer bungee channels

Rear loops for AA and CR123 NVG batteries

Made in Israel

Size One size In the box Cover without accessories. ATTENTION! REAR POUCH NOT INCLUDED! SHOWN FOR ILLUSTRATIVE PURPOSES ONLY.
Details
Agilite AG3™ Placard Triple Mag Pouch

€62,95 – €71,45
The Agilite AG3 Placard is a bungee retention placard that allows you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way.

Suitable for three 5.56 magazines and can be attached to any plate holder with G-hooks or Placard buckles (both buckles and G-hooks included with the placard).

Bungee retention warehouse bags have been used for more than a decade because they hold warehouses well, but they have an inherent, annoying flaw. They make removing or returning a warehouse inconvenient, with two hands and two movements, because the warehouse keeps hooking on the bungee tabs.

AG pouches solve this age-old problem and go from HALO jump-level retention to safety off, mag draw, may re-index and back without ever taking your dominant hand off your weapon.

The custom-polymer pull tabs also allow both mechanical and friction grip to get the perfect grip, with or without gloves.

Whether you're defending your country at the tip of the spear or defending your family, AG pouches give you a head start.

Sizes

Fits three 5.56x45 AR or M4 rifle magazines.

The AG3 Placard fits ANY plate carrier and is equipped with both G-hooks and MOLLE buckles.

Specifications

500D CORDURA® Mil Spec Tactical Nylon |

Laser cut Velcro MOLLE overlay

Suitable for three 5.56 warehouses

Height adjustable

Weight: 0.16 kg

Including mil-spec G-hooks

Including mil-spec Polymer MOLLE Placard buckles

Details

Suitable for three 5.56 warehouses

Makes it easy to pull or place a magazine with one hand

Proprietary polymer pull tab for exceptional grip

Reliable retention to never lose a warehouse

With hook closure, to be attached to any plate carrier that Placard is capable.

Proven in battle in Israel

Smart retention lip meets military requirements without obstructing access to the bag
Select options Details
Not in stock - on order
Agilite Edge 3L Hydration Pack

€64,95
The Edge is a 3-liter tactical hydration carrier. It can be attached directly to the K5 Plate Carrier or any other modular plate carrier using the K Series MOLLE Hydration Attach Straps. It can also be worn independently using the K Series Shoulder straps. The Edge accommodates the Hydrapak Tactical Hydration Reservoir selected by Agilite for its excellent durability and ease of use or other 3L hydration bladders of the same size. The sleek design is built to be extremely unobtrusive for use during urban battles in close-quarter. The opening is shaped so that the hydration resevior can easily slide in and out, even when it's full, without disconnecting the Edge from your rig. Equipped with external Molle loops for attaching extra pouches. Specifications

1000D Mil-Spec Tactical Nylon

Mil Spec Plastic Hardware

Available in Multicam, Black & OD Green

Made in Israel

ATTENTION: EXCLUDING SHOULDER STRAPS *EXCLUDING RESERVOIR* ATTACHMENT STRAPS INCLUDED
Details
Agilite AG3™ 5.56 Triple Mag Pouch |

€63,95 – €64,95
Agilite AG Mag Pouches are bungee retention pouches that allow you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way. Bungee retention may pouches have been in use for over a decade because of how well they hold warehouses. but they have an inherent, annoying flaw. They make the removal or return of a mag a clumsy, two-convenient, two-motion process because the magazine sticks to the bungeelusjes. This is especially problematic with "tac reloads". AG pouches solve this age-old problem and go from HALO jump-level retention to safety, magazine pulling, magazine re-indexing and back without ever taking your dominant hand off your weapon. We don't believe in taking both hands off your weapon during a firefight, because we come from an environment where time outside the target and outside the weapon when the bullets fly around can easily cost you your life. Sometimes you can't miss that time to intervene again, because by grabbing you have to look down or take your second hand off your weapon. AG pouches use a combination of specially developed polymer pull tabs and various reinforced materials that work together to provide the retention level of closed-top pouches, but the fast pulling ability, without hooks, of open-top pouches. Your equipment should allow you to focus on the threat – it shouldn't bother or annoy you. The custom-made polymer pull tabs allow for both mechanical and friction grip for a perfect grip, with or without gloves. We don't believe in normal just because we've always done something a certain way doesn't mean we can't rethink it and evolve it to provide small but crucial benefits that improve your performance, comfort and safety. Whether you're defending your country on the tip of the spear or defending your family, AG pouches give you a head start. Details

Suitable for three 5.56 warehouses

Makes it possible to easily pull and insert the magazine with one hand

A patented polymer pull tab for exceptional grip

Reliable retention to never lose a warehouse

Built-in MOLLE rear mounting

Tested in battle in Israel

Smart retention tab meets military requirements without obstructing the entrance to the pouch

Specifications

500D CORDURA® Mil Spec Tactical Nylon

Laser cut Velcro MOLLE overlay

Takes 3 MOLLE slots down and 6 MOLLE slots transversely

Weight: 0.35lbs (0.16kg)

Sizes

Suitable for three 5.56x45 AR or M4 rifle magazines

Takes 3 MOLLE slots down and 6 MOLLE slots transversely
Select options Details
Agilite Pincer™ 2nd Layer Admin Pouch

€59,90 – €69,90
Attaches quickly and easily to the front of the Agilite Pincer™ Placard, giving it a whole new level of organization, storage and capabilities in one compact package.

Features a low profile with easily accessible administration pocket with both internal organization and a loop area for attaching velcro inserts.

Double side panels with laser-cut MOLLE, perfect for attaching Pincer™ Pistol Mag pouches or other single-column pouches of your choice.

2 internal elastic loops on the back, ideal for storing chemlights, trauma scissors, markers, pens and more.

Fits directly on the Agilite Pincer Placard* *This does NOT fit on any other placard system than the Agilite Pincer Placard. Dimensions: 47*13*3cm(18.5*5.1*1.1 inch) Weight: 0.3lbs (132g) Material:

500D CORDURA® Mil Spec Tactical Nylon

Laser cut Squadron™ laminate

Laser cut Velcro overlapping panels

*Pincer Placard™ is not included
Select options Details

Title