Haven't found what you were looking for ? Mail us !|info@afullmetaljacket.com
  • HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
    • Suitable for knives and all types of firearms
    • Can be applied to any surface
    • Transparent, residue-free, non-greasy coating
    • Very good sliding properties, long-lasting effect
    • Salt and freshwater resistant, economical in use
    • High temperature resistance from -40°C to +750°C
    • Does not shear, does not stick, is colorless and odorless
    • Cleaning the weapon is made easier
    MANUAL Fluna GunCoating is always applied to the cleaned weapon. Metal parts must be degreased before use so that the ceramic particles can adhere directly to the metal. Use Fluna Gun Degreaser for degreasing. Fluna GunCoating is sprayed thinly on the surface and then spread out with a lint-free cloth so that a thin, moist film is deposited on the surface. Fluna GunCoating then dries automatically. The coating is dry after approx. 30 minutes at room temperature and fully cured after approx. 2 hours. When using the vessel, make sure that the vessel is thoroughly cleaned beforehand. Fluna GunCoating is then applied thinly with cotton wool or a felt plug. The spray can is recommended for care of large surfaces. The liquid product in the dropper bottle should be used for coating small parts and adjusting the deductions.
  • HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
    • Suitable for knives and all types of firearms
    • Can be applied to any surface
    • Transparent, residue-free, non-greasy coating
    • Very good sliding properties, long-lasting effect
    • Salt and freshwater resistant, economical in use
    • High temperature resistance from -40°C to +750°C
    • Does not shear, does not stick, is colorless and odorless
    • Cleaning the weapon is made easier
    INSTRUCTIONS Fluna GunCoating is always applied to the cleaned weapon. Metal parts must be degreased before use so that the ceramic particles can adhere directly to the metal. Use Fluna Gun Degreaser for degreasing. Fluna GunCoating is thinly dripped on the surface and then spread out with a lint-free cloth so that a thin, moist film is deposited on the surface. Fluna GunCoating then dries automatically. The coating is dry after approx. 30 minutes at room temperature and fully cured after approx. 2 hours. When using the vessel, make sure that the vessel is thoroughly cleaned beforehand. Fluna GunCoating is then applied thinly with cotton wool or a felt plug. The spray can is recommended for care of large surfaces. The liquid product in the dropper bottle should be used for coating small parts and adjusting the deductions.
  • Not in stock - on order
    The Supreme Pro-X ear cap combines optimal protection with high gain, AUX input and waterproof battery compartment. It is available with green or black cups, with foldable headband or as a neckband version. As standard, it is equipped with a comfortable foam sealing pad. Key product features:
    • Waterproof microphones (IP67 tested)
    • Optional camouflage headband
    • Cups shaped to fit both right- and left-handed shooters
    • Convenient foldable headband or neckband
    • Two separate, well-shielded microphones for optimal sound direction location
    • High gain and natural sound reproduction without chopping off and turning off
    • Audio input (AUX) for connecting external audio sources, such as radio
    • Lead with 3.5 mm mono jack plug included
    Black cups with headband in textile or leather. 75302-X-02-S : Supreme Pro X Black Sordin (Textile) Suitable for hunting Specification
    • Weight = 330 g
    • Estimated battery life (hours) = 600
    Performance/damping values
    • SNR = 25
    • H = 28
    • M = 21
    • L = 16
    • NRR = 19
  • High-quality hearing protector The Supreme Pro electronic earmuffs protect you from dangerous sounds and at the same time you can listen to ambient sounds. The ambient noise is detected by two microphones mounted on the outside of each cup and displayed through speakers in the earmuffs. The advanced electronic design compresses the dangerous noise to a safe level, while harmless sounds are still audible. By wearing Supreme Pro, you can communicate face-to-face with other people and hear commands and instructions without removing the hearing protector, even when others are photographing. Supreme Pro combines optimal protection with high amplification, AUX input and waterproof battery compartment. It is available with green cups with a foldable headband. As standard, it is equipped with a comfortable foam sealing pad. Key product features
    • Cups shaped to fit both right- and left-handed shooters
    • Convenient foldable headband or neckband
    • Two separate, well-shielded microphones for optimal sound direction location
    • High gain and natural sound reproduction without chopping off and turning off
    • Audio input (AUX) for connecting external audio sources, such as radio
    • Lead with 3.5 mm mono jack plug included
    • Suitable for hunting
    Specification
    • Weight = 310 g
    • Estimated battery life (hours) = 600
    Performance/damping values
    • SNR = 25
    • H = 28
    • M = 21
    • L = 16
    • NRR = 18
    75302-S : Supreme Pro Sordin
  • HIGH PERFORMANCE CERAMIC COATING Fluna GunCoating is a high-quality ceramic coating for all types of firearms and knives. Despite its extremely lubricating properties, Fluna GunCoating is residue-free, forms an invisible, dry film on the weapon, and increases the sliding properties of moving parts on the weapon. Loud, metallic sounds of rubbing parts — such as latches on latches on bolt guns — are significantly reduced. Fluna GunCoating forms a firm adhesion with the surface, does not run off and thus protects the weapon against corrosion for a long time. Fluna GunCoating can be applied to all surfaces such as steel, plastic, painted wooden parts, gold and silver decorations, colored pavement, cast iron and rubber. Fluna GunCoating evens out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear and tear is kept to a minimum and the shooting performance of the weapon is increased. Fluna GunCoating works from the first treatment - even with older pistols! Attributes
    • Suitable for knives and all types of firearms
    • Can be applied to any surface
    • Transparent, residue-free, non-greasy coating
    • Very good sliding properties, long-lasting effect
    • Salt and freshwater resistant, economical in use
    • High temperature resistance from -40°C to +750°C
    • Does not shear, does not stick, is colorless and odorless
    • Cleaning the weapon is made easier
    MANUAL Fluna GunCoating is always applied to the cleaned weapon. Metal parts must be degreased before use so that the ceramic particles can adhere directly to the metal. Use Fluna Gun Degreaser for degreasing. Fluna GunCoating is sprayed thinly on the surface and then spread out with a lint-free cloth so that a thin, moist film is deposited on the surface. Fluna GunCoating then dries automatically. The coating is dry after approx. 30 minutes at room temperature and fully cured after approx. 2 hours. When using the vessel, make sure that the vessel is thoroughly cleaned beforehand. Fluna GunCoating is then applied thinly with cotton wool or a felt plug. The spray can is recommended for care of large surfaces. The liquid product in the dropper bottle should be used for coating small parts and adjusting the deductions.
  • The Sordin Supreme Basic is the entry-level electronic ear cap. It is designed with standard electronics and offers a maximum 1:1 sound reproduction (no amplification of low sounds). Suitable for hunting. Key product features
    • Standard electronic components
    • Battery compartment in the cup
    • Available with or without audio input (AUX)
    • Foldable for easy storage
    75300-S : Supreme Basic Sordin 75301-S : Supreme Basic AUX Sordin Specification
    • Weight = 310 g
    • Estimated battery life (hours) = 300
    Performance/damping values
    • SNR = 25
    • H = 28
    • M = 21
    • L = 16
    • NRR = N/A
  • 4330 - LINED BELT LINER, 3" (76MM) The Safariland 4330 is a 76mm padded belt liner for use with standard and tactical straps. The filling extends beyond the edges of the belt, which helps in dividing the weight and removing bottlenecks. The antibacterial and antimicrobial mesh inside helps prevent germs and odor from accumulating. Features
    • 3" padded belt liner for use with service or tactical belts
    • The padding reaches beyond the edges of the belt to facilitate weight distribution and remove the bottleneck
    • Antibacterial and antimicrobial mesh inner lining
    HOW TO MEASURE YOUR BELT: Straps designed to be worn with a lower strap, such as a service belt, should be measured four inches (4 inches) above your normal pant size. The lower strap should be measured two inches (2") above your pants size. For example, if the pant size is 34", the belt size would be 38" and the bottom strap would be size 36". If a lower strap is not worn with the belt, order two inches (2") above your normal pant size.
  • 4331- MOLLE COMBAT BELT For ultimate comfort; distributes the worn weight evenly over the hip, while the padded mesh lining and preformed shape provide comfort all day long. The two rows of MOLLE loop straps run along the length of the belt and provide enough space for multiple accessories. The 4331 provides a stable platform to attach a holster with a UBL (Universal Belt Loop) or Tactical Leg Shroud system. Lined with antibacterial and antimicrobial foam filling with a high-quality, durable and break-resistant buckle. For use with 029 Liner Belt. Available in Black and Tan Features
    • Antibacterial and microbial foam filling on the inside to prevent germs and odor from accumulating
    • Breathable padded mesh lining
    • Two rows of MOLLE bands for multiple fasteners
    • Separated MOLLE strap to access the rigid 2" inner strap to attach holster or other accessories
    • Four D-rings to attach accessories or harness
    • Loop Line for use with 029 lining belt
    • Durable and break-resistant buckle
  • The Bollé Tactical X1000 is a ballistic safety goggle specially developed for the army and special forces. It has a low profile and is suitable for use with a helmet. The permanent Platinum® coating applied to both surfaces makes the glass extremely scratch-resistant (1.4 cd/m²), gives it high resistance to the most aggressive chemicals and slows down the occurrence of fogging. In any case and at any time, Platinum® offers the highest level of security for the eyes. The glass filters 99.9% of the UVA/UVB radiation. Corrective lens inserts sold separately (Article 616514). V50 test according to STANAG 2920: 795 km/h - 220.7 m/s. Certified according to CE EN166 3 BT, ANSIZ87.1-2010, GL-PD-10-12, MIL-DTL-43511D. Details:
    • Panoramic field of view.
    • Anti-condensation and anti-scratch coating.
    • Elastic, silicone coated headband with Velcro and quick release.
    • Transport cover made of microfibre (to be used as a cleaning cloth).
    • Narrow frame, ideal for wearing with helmets.
    • Heat-resistant TPV frame.
    • Indirect ventilation.
    • Delivery size: 1x X1000 with clear glass, 1x microfiber transport cover, 1x hard case.
    • Width of the eyeglass band: 35 mm.
    • Thickness glass: 3 mm.
    • Weight: approx. 114 g.
  • Not in stock - on order
    A fast, convenient and modular carrying case for two AR magazines, the 2-Banger of 5.11 Tactical® keeps you locked and loaded in any situation. Dimensions
    • Main compartment - 7" H x 9.5" L x 3" D
    • Mag-bag - 8" x 9.5"
    • Total capacity - 200 cubic inches / 3 liters total capacity
    • Weight - 1.1 lbs
    Attributes
    • Carries two fully loaded AR warehouses and accessories
    • Accelerated, quickly prepared design
    • Waterproof back coating
    • Loop patch for flag or ID
    • Resilient 500D nylon construction
    • Padded, adjustable shoulder strap
    • Reliable internal retention system
    • Laser-cut web platform
    • Storage compartment at the front
    • Hidden rear pistol compartment
    • Your choice of flap or bungee cover
    • 1050D reinforcements in areas with high wear
    • Self-healing YKK® zippers
    • Molded zipper pulls to the main compartment
    • Personalize your bag with specially made bags
  • Not in stock - on order
    This is a double leg protector with dual 2" (50 mm) elastic leg straps and a quick release with 2" (50 mm) strap that is attached to the belt. It is made of injection molded nylon for durability and flexibility. It has mounting holes for the attachment of three Safariland® tactical accessories or a holster with two accessories. The elastic leg straps are equipped with two silicones for non-slip traction. Features
    • Features harness and shroud only to mount accessories
    • Ambidextrous
    • MODEL: 6005-6
    • SKU: 1118752
    • PART: 6005-6-123
    Without
  • Not in stock - on order
    Whether for handicrafts, home or hobby, for care, protection, cleaning or lubrication, at home, at work or on the go - Ballistol Universal Oil is the right oil for 1,000 cases and more. It is used as a rust protection, lubricating oil, care and cleaning agent and has excelled for more than 115 years with many excellent properties. BALLISTOL UNIVERSAL OIL:
    • extremely creeping,
    • sliding actively,
    • does not wax,
    • fully biodegradable,
    • food safe,
    • skin-friendly,
    • completely harmless,
    • environmentally friendly
    • has a disinfecting effect.
    Ballistol Universal Oil was developed in 1904 and has been produced in Germany since then according to an unchanged recipe. All active ingredients in Ballistol Universal Oil are particularly pure, of organic origin and completely degradable. The base oil for Ballistol Universal Oil is medicinally pure, free of chlorinated hydrocarbons and contains no substances of animal origin. In addition, Ballistol Universal Oil is silicone, PTFE, acid and resin-free and harmless within the meaning of Articles 30, 31 of the Food, Consumer Goods and Feed Act (LFGB) and Regulation (EC) No 1935/2004. Ballistol Universal Oil is therefore suitable for the care and maintenance of machines and appliances used in the food and beverage industry that may come into contact with the product. Ballistol Universal Oil cleans, maintains, protects, preserves and dissolves rust and residues such as resins of unsuitable oils and is applicable to wood, leather, stainless steel, iron, non-ferrous metals and oil-resistant rubber. As a universal oil, it can be used in an incredibly versatile way - in professional and hobby workshops, for industry and trade, cars and motorcycles, household and garden, for fishing, sports and for leather and weapon care. There are thousands of practical applications for Ballistol Universal Oil and new ones are always discovered. You can also take advantage of the advantages of the original Ballistol universal oil. Attributes
    • Material compatibility: rubber (oil resistant), wood, leather, metal/iron
    • Cleaning: Removing unsuitable fats, removing unsuitable oils, removing gum-like oils/resin, descaling/cleaning connections/contact agents on poles, plug connections, tombac/copper, unwanted patina on copper, brass, stainless steel and aluminum is removed, infiltrated, dissolves rust
    • Protect: preserved, corrosion protection / rust protection, neutralizes light acids such as hand perspiration
    • Lubrication: creep oil, lubricating oil, cutting oil / drilling oil
  • Not in stock - on order
    A well-constructed enveloping design that provides comfortable protection with full peripheral vision. Tight-fitting sleeping arms with strong hinges, hold them well on your head during vigorous activities. Bright lens. They are CE certified, your guarantee for safe, reliable protection. functions:
    • Straight sleep and integrated nosepiece fit all face sizes.
    • General purposes for indoor applications that require impact protection.
    • Provides protection against excessive glare
    • Provides 99% protection against harmful UVA and UV-B rays.
    • Scratch-resistant lenses made of 100% polycarbonate
    • Exceeds ANSI Z87.1-2003 high impact requirements
    • CE EN166 certified
  • A stylishly adjustable ergonomic design, with ventilation in frame and nose bridge, that provides comfortable protection with full peripheral vision. Bright lens for general applications that require protection against impacts. They are CE certified, your guarantee for safe, reliable protection. functions:
    • Stylish, ergonomic frame combined with slim polycarbonate lenses for the ultimate in protection and style.
    • The newly designed ventilated nose piece is soft and adjustable, allowing heat to be dissipated from the nose bridge and reducing fogging.
    • Perfectly balanced from sleep tips to the back of the nose, for the best possible fit.
    • High-quality optics offer extreme clarity and no distortion.
    • Soft, double-injected rubber legs combined with fully adjustable, straight legs enhance the highest level of comfort and fit.
    • The top of the frame is ventilated so that air can circulate and fog up is prevented.
    • Curved lens with 9.75 base provides excellent lateral protection against wind and particles in the air.
    • Provides protection against excessive glare.
    • Provides 99% protection against harmful UVA and UV-B rays.
    • Ansi Z87.1-2003 exceeds high impact requirements.
    • CAN/CSA Z94.3-07.
    • CE EN166 certified.
  • Beretta BDU Field Jacket BDU Field Jacket Beretta "Battle Dress Uniform" made of lightweight and resistant nylon and cotton ripstop. ""Shock absorbing"" elbow protectors (not included) pockets, Canadian buttons, zippered pockets and Velcro closures guarantee maximum functionality. The jacket can be combined with the BDU Field Pants and BDU Field Shorts. Details:
    • Closure with Canadian knots
    • Velcro patches
    • Large front pockets with YKK zipper
    • Elbow pockets with Velcro
    • Velcro control on the wrist
    • Embroidered Beretta logo
    • Fit: normal fit
    Training Equipment Uniform The Training Gear Uniform is inspired by BDU's or "Battle Dress Uniform" used by various armed forces and law enforcement agencies around the world.
  • Beretta BDU Field Jacket BDU Field Jacket Beretta "Battle Dress Uniform" made of lightweight and resistant nylon and cotton ripstop. ""Shock absorbing"" elbow protectors (not included) pockets, Canadian buttons, zippered pockets and Velcro closures guarantee maximum functionality. The jacket can be combined with the BDU Field Pants and BDU Field Shorts. Details:
    • Closure with Canadian knots
    • Velcro patches
    • Large front pockets with YKK zipper
    • Elbow pockets with Velcro
    • Velcro control on the wrist
    • Embroidered Beretta logo
    • Fit: normal fit
    Training Equipment Uniform The Training Gear Uniform is inspired by BDU's or "Battle Dress Uniform" used by various armed forces and law enforcement agencies around the world.
Go to Top