-
Not in stock - on order
Warrior's discreet Armor Carrier has large plates in front, rear and stand-alone side plates. The RICAS Compact also has Nexus Level 3a Soft Armor on the front, back and inside around the arms. Offers 10% less protection than the original RICAS but offers improved mobility. Fully adjustable. -
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The shoulders are fully adjustable and have an emergency release on one side which frees the left shoulder area and allows the operator to remove the rig without having to remove the operator's helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). -
The Union 6" Boot WP of 5.11 Tactical convinces with good stability and low weight. The 6 inch (15 cm) high shaft of durable suede and hard wearing nylon provides optimal support. The outsole with Vibram® XS-Trek formula is highly profiled and provides excellent support and balance on different surfaces The eVent® BBP lining provides good waterproofness and breathability The Ortholite® X-25 footbed provides shock absorption and moisture regulation. Material Upper: leather, 840D nylon. Sole: rubber. Details:- Vibram® Nuansi 2 outsole with PU midsole with Vibram® XS-Trek.
- Top material of waterproof suede and very hard-wearing nylon.
- Ortholite® X-25 footbed.
- 5 11® rubber cap for protection and durability.
- Waterproof eVent® GDP membrane.
- Padded shaft and tongue.
- Height shaft: 15 cm.
- Weight: approx. 780 g / pair (size 42).
- Us (EU) Code: 8 (41); 8,5 (42); 9,5 (43); 10 (44); 11 (45); 12 (46); 13 (47,5).
-
Originally developed for the US. Navy Seals and Green Beret Special Forces, redesigned and with full rubber protection for the toes, the AKU NS 564 Spider II is a versatile, highly breathable boot used by special forces. The specially developed Vibram® compound provides optimal grip on wet surfaces and in situations that require extreme grip and total control. With a high level of support, stability and good cushioning, it is perfect for carrying heavy loads and other sweaty tasks. The supermaterial of the AKU NS 564 Spider II consists of highly breathable AIR 8000® material, which provides optimal comfort at high temperatures and also allows water from inside to outside when water has entered the boot. AIR 8000® is a materials technology developed by AKU that provides functional shoes with optimized breathability and fast-drying material properties. Thanks to the use of highly water-vapor-permeable functional fabrics, shoes with AIR 8000® have up to 11 times faster moisture regulation than comparable models made from fast-drying materials. The flat sole and special profile to the tip are ideal for climbing and overcoming climbing obstacles. The extremely robust all-round debris protection and nose provide extra protection on rocky and stony terrain. All this makes the AKU NS 564 Spider II an ideal combat boot for military and police use. Material Top material: leather (1.8 mm) with nylon inserts (AIR 8000®), lining: 100% polyester; Insole: 4-2 mm nylon + EVA; Sole: rubber, polyurethane (Vibram® Spider) Details:- Suede leather and high-quality AIR 8000® outdoor material.
- Very breathable and fast-drying.
- All-round debris protection edge with toe-protecting.
- Padded shaft and tongue.
- IMS cushioning for maximum comfort.
- Nylon insole with a thickness of 4-2 mm and EVA (soft).
- Non-slip Vibram® Spider sole provides excellent grip on all surfaces.
- Flat sole and special profile at the tip offer optimal climbing characteristics.
- Shaft height: approximately 16 cm.
- Weight: approx. 1150 g / pair (size 43). Made in the EU.
-
An extremely durable construction, unbeatable comfort, functional pocket configuration and reliable knee protection make the UF PRO P-40 All-Terrain tactical pants that give you a decisive advantage in any terrain or activity. Large Schoeller®-dynamic stretch inserts in the seating area and a special anatomical fit go hand in hand so you can enjoy unparalleled freedom of movement. Breathable, lightweight ripstop material and ventilation zippers on the knees make you feel comfortable all day or all night. The P-40 All-Terrain Gen.2 has a cut to keep the knee protection accessories in place and barely stand out. Instead, you'll see how well the knee pads work - they're always there when you kneel and they're always ready to give you the right protection. Best of all, no straps or straightening are needed to keep them in place. It is fully compatible with the separately available UF PRO 3D Tactical knee pads. These pads are available in two versions: CUSHION for extra cushioning for long knees and IMPACT for protection from the effects of foam-based force from sudden, hard shocks. The P-40 All-Terrain Gen. 2 tactical pants have nine spacious, functional pockets that allow you to store lots of personal gear and compact tools. The large side pockets contain inner pockets made of blade®-dynamic fabric. This allows you to store extra gear that stays in place (the design and construction of the inner pockets are designed so that the gear doesn't slide in when you move, making the pants perform better, and it also makes you more comfortable doing your job, so you don't have to worry about important things falling out). The P-40 All-Terrain is made of very breathable PolyCo ripstop material. Sweat or light rain dry very quickly in this fabric. When the temperature is below zero, the P-40 All-Terrain can easily be converted into thermopants. It is compatible with the windproof UF PRO WINDSTOPPER® interior lining. material Upholstery: 67% polyester, 33% cotton ripstop mix; Stretch inserts: 80% polyamide, 10% polyester, 10% elastane (Schoeller®-Dynamic); Reinforcements: 100% nylon (500D CORDURA®); YKK® zippers; YKK® button Details:- Breathable, light polyceny ripstop material.
- Raised waistband.
- Stretch inserts in the waistband.
- Schoeller®-dynamic stretch material in the seating area.
- Pull-Fly gulp with double zipper, button-up and clamp hook.
- 2 hand pockets with Cordura reinforcements for mesclips.
- 1 zippered safety bag in the left pocket.
- 2 zippered back pockets and CORDURA® reinforcement.
- 2 double-entry thigh pockets, large storage space, special inner pockets and a mounted CORDURA®-reinforced material pocket with safety valve.
- 2 knife bags with CORDURA® reinforcement.
- 5 double belt loops reinforced with CORDURA®.
- Knee pockets that are accessible from the outside for the easy insertion of the 3D Tactical knee pads (sold separately).
- Ventilation zips on the knees.
- With CORDURA® strengthened knee area.
- With CORDURA® strengthened instep and knee.
- D-ring on the belt loop at the front.
- Adjustable hem with boot hook.
- Inside zipper for removable WINDSTOPPER® lining (sold separately).
-
An extremely durable construction, unbeatable comfort, functional pocket configuration and reliable knee protection make the UF PRO P-40 All-Terrain tactical pants that give you a decisive advantage in any terrain or activity. Large Schoeller®-dynamic stretch inserts in the seating area and a special anatomical fit go hand in hand so you can enjoy unparalleled freedom of movement. Breathable, lightweight ripstop material and ventilation zippers on the knees make you feel comfortable all day or all night. The P-40 All-Terrain Gen.2 has a cut to keep the knee protection accessories in place and barely stand out. Instead, you'll see how well the knee pads work - they're always there when you kneel and they're always ready to give you the right protection. Best of all, no straps or straightening are needed to keep them in place. It is fully compatible with the separately available UF PRO 3D Tactical knee pads. These pads are available in two versions: CUSHION for extra cushioning for long knees and IMPACT for protection from the effects of foam-based force from sudden, hard shocks. The P-40 All-Terrain Gen. 2 tactical pants have nine spacious, functional pockets that allow you to store lots of personal gear and compact tools. The large side pockets contain inner pockets made of blade®-dynamic fabric. This allows you to store extra gear that stays in place (the design and construction of the inner pockets are designed so that the gear doesn't slide in when you move, making the pants perform better, and it also makes you more comfortable doing your job, so you don't have to worry about important things falling out). The P-40 All-Terrain is made of very breathable PolyCo ripstop material. Sweat or light rain dry very quickly in this fabric. When the temperature is below zero, the P-40 All-Terrain can easily be converted into thermopants. It is compatible with the windproof UF PRO WINDSTOPPER® interior lining. Material Upholstery: 67% polyester, 33% cotton ripstop mix; Stretch inserts: 80% polyamide, 10% polyester, 10% elastane (Schoeller®-Dynamic); Reinforcements: 100% nylon (500D CORDURA®); YKK® zippers; YKK® button Details:- Breathable, light polyceny ripstop material.
- Raised waistband.
- Stretch inserts in the waistband.
- Schoeller®-dynamic stretch material in the seating area.
- Pull-Fly gulp with double zipper, button-up and clamp hook.
- 2 hand pockets with Cordura reinforcements for mesclips.
- 1 zippered safety bag in the left pocket.
- 2 zippered back pockets and CORDURA® reinforcement.
- 2 double-entry thigh pockets, large storage space, special inner pockets and a mounted CORDURA®-reinforced material pocket with safety valve.
- 2 knife bags with CORDURA® reinforcement.
- 5 double belt loops reinforced with CORDURA®.
- Knee pockets that are accessible from the outside for the easy insertion of the 3D Tactical knee pads (sold separately).
- Ventilation zips on the knees.
- With CORDURA® strengthened knee area.
- With CORDURA® strengthened instep and knee.
- D-ring on the belt loop at the front.
- Adjustable hem with boot hook.
- Inside zipper for removable WINDSTOPPER® lining (sold separately).
-
An extremely durable construction, unbeatable comfort, functional pocket configuration and reliable knee protection make the UF PRO P-40 All-Terrain tactical pants that give you a decisive advantage in any terrain or activity. Large Schoeller®-dynamic stretch inserts in the seating area and a special anatomical fit go hand in hand so you can enjoy unparalleled freedom of movement. Breathable, lightweight ripstop material and ventilation zippers on the knees make you feel comfortable all day or all night. The P-40 All-Terrain Gen.2 has a cut to keep the knee protection accessories in place and barely stand out. Instead, you'll see how well the knee pads work - they're always there when you kneel and they're always ready to give you the right protection. Best of all, no straps or straightening are needed to keep them in place. It is fully compatible with the separately available UF PRO 3D Tactical knee pads. These pads are available in two versions: CUSHION for extra cushioning for long knees and IMPACT for protection from the effects of foam-based force from sudden, hard shocks. The P-40 All-Terrain Gen. 2 tactical pants have nine spacious, functional pockets that allow you to store lots of personal gear and compact tools. The large side pockets contain inner pockets made of blade®-dynamic fabric. This allows you to store extra gear that stays in place (the design and construction of the inner pockets are designed so that the gear doesn't slide in when you move, making the pants perform better, and it also makes you more comfortable doing your job, so you don't have to worry about important things falling out). The P-40 All-Terrain is made of very breathable PolyCo ripstop material. Sweat or light rain dry very quickly in this fabric. When the temperature is below zero, the P-40 All-Terrain can easily be converted into thermopants. It is compatible with the windproof UF PRO WINDSTOPPER® interior lining. material Upholstery: 67% polyester, 33% cotton ripstop mix; Stretch inserts: 80% polyamide, 10% polyester, 10% elastane (Schoeller®-Dynamic); Reinforcements: 100% nylon (500D CORDURA®); YKK® zippers; YKK® button Details:- Breathable, light polyceny ripstop material.
- Raised waistband.
- Stretch inserts in the waistband.
- Schoeller®-dynamic stretch material in the seating area.
- Pull-Fly gulp with double zipper, button-up and clamp hook.
- 2 hand pockets with Cordura reinforcements for mesclips.
- 1 zippered safety bag in the left pocket.
- 2 zippered back pockets and CORDURA® reinforcement.
- 2 double-entry thigh pockets, large storage space, special inner pockets and a mounted CORDURA®-reinforced material pocket with safety valve.
- 2 knife bags with CORDURA® reinforcement.
- 5 double belt loops reinforced with CORDURA®.
- Knee pockets that are accessible from the outside for the easy insertion of the 3D Tactical knee pads (sold separately).
- Ventilation zips on the knees.
- With CORDURA® strengthened knee area.
- With CORDURA® strengthened instep and knee.
- D-ring on the belt loop at the front.
- Adjustable hem with boot hook.
- Inside zipper for removable WINDSTOPPER® lining (sold separately).
-
Not in stock - on order
Unisex shooting vest with M.O.L.L.E system on the pockets, breathable inserts of 4-way stretch 3D mesh and slide at the front of eco-suede. With the experience gained in the military segment, Beretta has launched the first shooting vest equipped with the M.O.L.L.E system: thanks to this innovative technique, you can decide where to place the front pockets. The M.O.L.L.E. Shooting Vest is made of high-quality materials, such as the front in eco suede and breathable inserts in 4-way stretch 3D mesh. Shooting vest Whether you're a professional or an amateur, the shooting vest is the essential garment for a shooter. That's why the Beretta Shooting Vest line offers shooting vests designed and realized according to different needs, so you can choose the one that best suits you.- Elastische inzetstukken op de schouders.
- Slide in front in eco suede.
- Expandable front pockets with dual input with M.O.L.L.E system.
- Breathable inserts of 3D 4-way stretch mesh.
- Breast pocket with Velcro closure.
- Beretta Uniform Pro logo on the chest.
- Elastic adjustable strap on the back.
- Beretta logo on the back.
- Polyester and cotton fabric.
-
5.11 Tactical® brings you the TacTec ™ Plate Carrier, which is designed to be the most lightweight and best-fitting plate carrier you can find and constructed to ensure high performance while remaining light and mobile. Dimensions Suitable for 24 mm wide medium (12.5" H x 9.5" L x 2 "B) and large (13.25" x 10.25 " x 2.25") SAPI plates Standard abdominal straps are suitable for a circumference of 52" with the elastic relaxed, and up to 57" when fully stretched DETAILS FEATURES Improved comfort and freedom of movement Suitable for medium or large ballistic plates Shoulder pads on the back yote evenly distribute the weight Hard-wearing 500D nylon Adjustable waist and tension bands (sizes XS-XL) Extendable GrabDrag handle for emergency exfiltration Quick-tensioner with one hand Water-repellent coating Extra-large airflow panels Durable Duraflex® hardware Web ID loop Suitable for Rogue® men's and women's weight vests -
Not in stock - on order
Men's elastic and water-repellent softshell material with BWR - Beretta Wind Resistant membrane, 4-fold elastic inserts at key points and microsuède reinforcements on the shoulders. The Windshield shooting jacket is made of Softshell, a fabric with a breathable BWR - Beretta Wind Resistant between the outer dust layer and the inner jersey layer. On the sides and under the sleeves, the fabric is 4-way elastic for maximum freedom of movement; A mesh insert has been found near the armpit to provide breathability. The details of microsuède on the shoulders help hold the gun better, and in the large, expandable double-entry pockets, you can bring all the patterns you need for your recording session. The jacket also has inner pockets for the "Beretta Recoil Reducer", the gel-tech bet that softens the recoil (not included as standard with the jacket). Features- Knitted bomber collar.
- Microsuède shooting plaster with Beretta stitching.
- YKK two-way zipper.
- Large front pockets with double input, expandable with push buttons, fold and reinforcements of microsuede.
- Beretta logo printed on the left pocket in contrasting colour.
- 4-fold elastic fabrics bet on the sides.
- Mesh insertion under the armpit.
- Beretta print on the right sleeve.
- Storm-resistant lycra cuffs.
- Rubber patch with Beretta logo in contrasting color on the back.
- Inner pockets for "Beretta Recoil Reducer", not included in the garment.
-
The Condor Vanquish RS plate carrier from the Vanquish Armor System (VAS) is made of a robust nylon construction and has fast-opening connectors that allow the user to quickly remove the carrier in an emergency. Compared to conventional MOLLE loops, the Lasercut MOLLE is lighter, more resistant to cracks and has a flat profile. The Vanquish RS Plate Carrier can be individually adapted to the missions, for example it has removable front/back cushions, laser-cut MOLLE and laser-cut MOLLE Velcro on the front and back. Suitable for Medium and Large Swimmer / ESAPI plates up to 25 x 30 cm. Material- 100% polyamide
- Inner lining: 100% polyester
- Quick release system with ROC buckles on the shoulders and sides.
- Laser-cut MOLLE laminate on the front, back and sides.
- Adjustable shoulder straps.
- Adjustable abdominal strap with Velcro pockets for ballistic inserts.
- Removable inner lining.
- Flat card/ document bag with Velcro closure.
- Easily accessible plate bags.
- Suitable for protective plates up to about 25 x 30 cm.
- Recovery handle.
- Velcro surfaces on the front and back for ID patches.
- Compatible with VAS accessories.
- Weight: about 1189 grams.
-
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The Dynamic Combat System (DCS) is a lightweight, unobtrusive system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The DCS can contain large plates at the front and back and has the option to wear side plates "6 x 6" or "6 x 8". NEXUS N.I.J. Level 3a Front, Back and Side Armor can also be used with I.C.W. style plates and for additional protection against I.E.D.s armor carrier, with detachable sides. The shoulders are fully adjustable and have an emergency release on one side, which frees the left shoulder area and allows the operator to remove the rig without taking off his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D Spacer Mesh lining is used for comfort and allows body heat away from the body surface while helping with airflow to cool. The DCS is designed to be worn in conjunction with the Warrior Frag Belt (sold separately). -
Not in stock - on order
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for special forces requirements, PSD operations as well as Police Tactical Operations/SWAT. The shoulders are fully adjustable and have an emergency release on one side, freeing the left shoulder area and allowing the operator to remove the rig without having to remove his helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). The DCS DA 5.56 mm (Direct Action) comes standard with 5 x Open Mags for 5.56 mm Magazines and 2 x Small Utility/Medic Pouch. -
Not in stock - on order
The 5.11 Tactical All Missions-Plate carrier offers a high level of comfort, a secure fit and freedom of movement thanks to its flexible, customizable design. HYPALON® wide and padded shoulder straps ensure even weight distribution and removable chest and back cushions ensure optimal ventilation and thus prevent heat development. The front and back are equipped with laser-cut MOLLE-Velcro and HEXGRID® panel, providing individual equipment with MOLLE or Velcro-compatible equipment. The HEXGRID® panels are removable and can be replaced with 5.11 Gear Set ™-compatible equipment. The HEXGRID® mounting platform is MOLLE-compatible and offers vertical, horizontal and diagonal assembly capabilities thanks to its special honeycomb-like structure. The All Missions record carrier also offers three abdominal strap options: fast-circuit belts, elastic stretch with plug-in capability for radio, magazines or side plates, and a HEXGRID®-abdominal strap. The All Missions plate carrier is suitable for all common protective plates, such as SAPI and ESAPI. Material Main material: 100% nylon 500D; HEXGRID®: 420D / 1000D Cordura® nylon; Duraflex® hardware. Details:- 5.11 Gear Set ™ compatible.
- Padded and adjustable shoulder straps made of HYPALON®.
- Detachable bodypads (chest and back).
- 1 patented HEXGRID® assembly panel.
- 1 patented HEXGRID® kangaroo bag mounting panel.
- MOLLE Velcro surfaces at the front and back.
- Velcro loops for cable management.
- Extendable recovery and rescue lever.
- Suitable for all common protective plates, such as SAPI and ESAPI.
- Triple abdominal strap option (webbing, elastic waistband and HEXGRID®)
- Possibility of lateral insertion for eg. Radio, magazines and side protection plates.
- GSA/TAA compatible.
- Weight: approx. 1440 g (size S / M).
-
Version 3.0 The K19 is the ultimate modern plate carrier. Designed, tested and proven in battle in Israel and behind enemy lines with some of the IDF's most elite units. The K19 has many subtle but revolutionary features that no other plate carrier has. When it comes to the belly band, we have thought of everything. Many modern plate carriers now use quick release mechanisms, but they always come at the expense of not being able to easily adjust the fit. The K19 uses our Egress™ Quick-release system and patented Fast-Adjust™ Cummerbund that can be adjusted and refined by the wearer in real time. Getting the perfect fit can depend on your specific mission gear, what you're wearing underneath (which can change halfway through the mission), or even how much you ate for lunch. We know that the ability to customize it yourself, on-the-fly, is critical to avoid unnecessary fatigue and impaired combat awareness. The K19 has a one-size-fits-all belly band and multi-size plate bag, eliminating the need to make complicated and risky size choices when buying. You know it will always suit you or members of your team, regardless of your gear or mission set. This is also important for procurement professionals who can be sure that it is a good fit for all their boys (or girls). The quick-adjustable belly strap also has a built-in stretch element that allows the vest to be pulled nice and tight so it doesn't bounce when you run, but that gives you that inch or so of stretch needed when you fall on a knee so the wearer doesn't flatten their torso. The latest version of the K19 is also compatible with placard, with both upper attachment points and a new laser-cut loop overlay. This new layer gives you the best of all worlds. It allows you to either directly add velcro placards, or use the mil spec, bartacked molle underneath to attach ordinary molle bags. Unlike other carriers, the quick-release fasteners in the shoulder area are placed far back so they don't interfere with your rifle stock and are still easily accessible. When it comes to comfort, the K19 shares many of the comfort features of the battle-proven Agilite K5, which is considered the most comfortable plate carrier on the market. Such comfort features include a generous melting foam shoulder pad for extreme comfort even with prolonged use. Anyone who has spent time in the military knows that even the shortest missions can culminate in multiple day operations. Comfort is not a luxury, it is a necessity to stay alert and not be distracted in hostile environments where complacency can cost you your life. One of the secrets of the K19's comfort level is that the shoulder straps create a patented "V" shape for the mass that distributes the weight over the maximum surface and relieves the pressure points. The back of the K19 plate bags has a triple layer of low-profile fusion foam to stay comfortable even when using the K19 with hardened steel or ceramic armor plates. Steel or ceramic plates often have hard corners and edges that can dig into your hull when using regular plate carriers, but the K19 has inherent padding to prevent this. The K19 is also compatible with the Agilite K-series, which means it has the ability to attach the AMAP III Assault package directly to it within seconds. No getting MOLLE, no hassle. At the back, the belly strap has numerous attachment points for the mil-spec G hooks, allowing a perfect fit for everyone, from the largest to the smallest person, without making the plate carrier unnecessarily large or prohibitively small. The K19 has grown from the front lines of the Israeli Special Forces to one of the best-selling plate carriers in the US. It has traveled many miles and crossed borders to some of the most dangerous places in the world to bring you one of the most detailed and thoughtful plate carriers on earth. Details- Integrated Egress™ Quick-release system
- Patented one-size-fits-all Fast-Adjust™ Cumberband that can be adjusted by the wearer in real time.
- Shoulder exit buckle are positioned backwards so that they do not interfere with the placement of the rifle stock
- One-size plate bag with internal controller to fit perfectly on all common board sizes (SAPI S, M or L-see size chart for exact details).
- One-Size-fits-all belly band-no risks or size decisions to be made during purchase-fit for very small-very large people.
- Suitable for plates
- Administration pocket with zipper at the front
- Fusion foam shoulder pad for long-term comfort
- Patented "V" design distributes the weight over the maximum surface area of the shoulders to the center of the mass to avoid pressure points.
- Rear tow lever
- Skeletal shoulders for communication and drinking tubes
- Laser-cut Velcro panels front and rear
- Agilite K Series™ compatible
- Designed, tested and proven in battle in Israel
- 1000D CORDURA® Mil Spec Tactical Nylon
- Mil Spec polymer buckles and hardware
- Egress™ Quick-release system and patented Fast-Adjust™ Cumberband.
- Laser cut Velcro MOLLE overlay panels
- Fits any size S, M or L SAPI/ESAPI plates up to 1.5 inches thick
- Fits all 10" X12" plates
- Dimensions chest panel with Velcro: 25cm*9cm (9.8" x 3.5")
- Laser Engraved Mil Spec Polymer Cord Pullers
- Weight: 2.5 lbs (1.1 kg) including Fast-Adjust Cummerbund™
-
Not in stock - on order
3M Peltor Tactical XP hearing protection
The 3M Peltor Tactical XP is an electronic, level-dependent hearing protection with a large number of setting options. Model TACXPF has a folding headband and a damping value of SNR = 31 dB. The Tactical XP headset combines comfort and safety with superior technology. For example, an innovative digital circuit enables individual adaptation of hearing protection to the relevant working environment, because, for example, the volume of the level-dependent function can be controlled. In addition, the headset has an equalizer, a balance control, an adjustable release time and a volume control for external input signals. A voice is particularly useful that easily guides the user through the menu. The extremely cushioning ear cups with soft, non-slip sealing rings ensure an optimal fit and high comfort. The padded, wide headband made of high-quality stainless steel makes the Tactical XP very comfortable even with prolonged use. The application areas of the 3M Peltor Tactical XP are everywhere where protection against harmful noise and at the same time communication is required, for example in industrial production, in construction and in the oil and gas industry. We order this product for you. Delivery time + - 2 weeks.
