Haven't found what you were looking for ? Mail us !|info@afullmetaljacket.com
  • Savotta GITD Patch Kit Savotta GITD Patch Kit

    Savotta GITD Patch Kit

    €16,90
    This simple kit allows you to create different markers by combining the different patches or using them as is. The kit includes two 25 x 25 mm squares, two 20 x 50 mm lines and a 50 x 50 mm square. This allows you to make a number of different combinations, or just highlight a lot of different things with separate patches. They are made of fairly high-quality photoluminescent material, the same material that we have been using for decades in various military applications. This stuff is quite effective and lasts a very long time. We examined 10+ year old material we had in stock and it performed with around 90% the same efficiency as its brand new counterpart. Since the material itself has a very long lifespan, we decided not to rely solely on lamination/gluing to hold the photoluminescent material to the hook band. These are therefore also sewn for the longest possible lifespan. This significantly increases the cost of production, but now we can be sure that these will not delaminate after a few winter/summer use cycles. KEY FEATURES
    • Bracket-attached glow-in-the-dark patches
    • Kit includes two lines, one large and two small squares
    • High quality and high performance photoluminescent material
    • Not only laminated, but also sewn to prevent delamination
    • 2-year material and product warranty
    • Gemaakt in Finland
    TECHNICAL SPECIFICATIONS
    • Weight: 6 g
    • Material: Photoluminescent material (phosphor-free, non-radioactive, non-toxic)
    • Brightness, mCd/m2: 150/22 (10/60 min after light failure)
    • Expiry time: about 35 hours
    Add to cart Details
  • Savotta Helmet Camo Scrim Savotta Helmet Camo Scrim

    Savotta Helmet Camo Scrim

    €19,90 – €22,90
    While natural foliage is the ultimate helmet camouflage, a bushy cover with a 3D effect might be the next best thing. Quick and easy to use, easy to customize. They effectively break up helmet silhouettes and provide quick camouflage adjustment to suit different environments. The design is very simple, a single flat piece of 500D Cordura with alternating zigzag shapes cut into it. The zigzag pattern is positioned in such a way that it creates an opening for NVG mounts on the front. Small slits have been cut around the edges for the elastic cord. Thread the elastic cord through the slits, tie it at the back, and pull it over your helmet like a shower cap. Finish it off by pulling back any excess material and rolling it underneath yourself to tighten the cover. If you want to adjust the fit, you can play around with threading the elastic cord through the slits and zigzag pattern in different ways. And if you get really wild and feel the need: you can even cut off excess material from the cover, but of course, such huge adjustments are at your own risk. KEY FEATURES
    • 3D Effect Camouflage Plate for Helmets
    • One-size-fits-most, best suited for high-cut L and XL helmets
    • Lightweight Laser Cut 500D Cordura
    • Quick and easy to apply and remove
    • All color options offer good NIR performance
    • 2-year material and product warranty
    • Gemaakt in Finland
    TECHNICAL SPECIFICATIONS
    • Weight (in retail container): 65 g
    • Dimensions (in retail packaging): 10 x 15 x 4 cm (W x L x D)
    • Fabric: 500D Cordura (100% polyamide)
    Select options Details
  • Savotta High Cut Helmet Cover V1 Savotta High Cut Helmet Cover V1

    Savotta High Cut Helmet Cover V1

    €69,90
    A versatile helmet cover with the right camouflage attachment cords throughout. Designed around the geometry of the Ops Core FAST XP high cut helmet shell, but also fits many other high cut helmets. The world is full of covers for high-cut helmets, but since 99% of these covers don't offer a real way to properly camouflage the helmet with foliage etc., we decided to unleash our offer on those as well. Made of 500D Cordura instead of regular garment fabric for high abrasion resistance. Unlike most high-cut helmet covers, which only have that zigzag cord at the top, our cover has elastic cord attachment points around the helmet shell. This allows you to camouflage your helmet well with foliage and the like. Because the elastic cord is not sewn to the cover, you can choose not to use it at all or to adjust or replace it as needed. The back of the case features a piece of 25mm webbing, with bartacked mounting points for IR strobes and the like. Then we have the standard loops on the sides, top and back for identifiers, patches, cameras, pockets for counterweight etc. The cover is attached via six pieces of one-wrap to pieces of hook on the inside of the helmet shell. If your specific helmet doesn't have pieces of hook exactly where it needs to: that's why we supply a piece of self-adhesive hook of 50 x 150 mm with every cover! Cut and paste it wherever you need it. KEY FEATURES
    • Designed for Ops-Core FAST XP scale geometry
    • Also fits many other high-cut helmets
    • Abrasion resistant 500D Cordura
    • Elastic cord for foliage and all-round cable routing
    • 25mm webbing on the back for IR flashes etc.
    • 50mm loop on the sides and top
    • 100 x 100 mm loop on the back
    • One-Wrap attachment in the helmet shell
    • Comes with a 50 x 100 mm piece of self-adhesive hook
    • All color options offer good NIR performance
    • 5-year material and manufacturer's warranty
    • Gemaakt in Finland
    TECHNICAL SPECIFICATIONS
    • Weight: L: 100 g, XL: 105 g
    • Fabric: 500D Cordura (100% polyamide)
    • Strap: 100% polyester
    SIZE, FIT AND COMPATIBILITY The sizes are matched to the Ops-Core FAST helmet sizes. A cover in size L fits a helmet in size L, a cover in size XL fits on a helmet shell in size XL. At the moment we don't offer M or XXL size covers, but L size covers fit M size shells (and XL size covers also fit L size shells) with the elastic cord as a kind of size adjustment system. Don't forget that each cover comes with a piece of adhesive hook tape, use this to create suitable attachment points in your helmet for the attachment straps! With the elastic cord that surrounds the helmet, you can tighten and shape the case to better fit the contours of helmet shells of different shapes and sizes. In addition to the perfect match, the Ops-Core FAST XP, we also tested the fit on a number of other common helmet designs:
    • Ops-Core FAST SF (super high cut): fits pretty nicely after some tweaking
    • UaRms TOR-D (slightly thicker helmet shell than Ops-Core): fits very well
    • Galvion Caiman ballistic (very different shape): fits quite well after some adjustments
    • PGD ARCH (old generation, Ops-Core XP shell geometry): fits very nicely
    • PGD ARCH/MICH (current (2023) gen): Fits, but NVD bungees and rear rail screws end up under the cover*.
    *The current-generation PGD ARCH/MICH helmet rails are covered by the visor at the front and rear. This blocks access to the rear rail screws (NVD ballast bag attachment) and the NVD bungee cords at the front of the rails. You can easily customize the cover by carefully cutting small holes (and burning them gently to avoid fraying) for the bungees and screws. Changes to the cover are of course at your own risk!
    Select options Details
  • Savotta NVD Counterweight Pouch V1 Savotta NVD Counterweight Pouch V1

    Savotta NVD Counterweight Pouch V1

    €32,45
    A compact counterweight bag, attaches with Velcro and via webbing loops to screws/rails. Designed for 45 x 60 x 5 mm Finnish Senop lead weight discs. KEY FEATURES
    • Designed to fit up to six 45 x 60 x 5 mm weight plates
    • Two compartments for weight discs
    • One large compartment for random items
    • Attaches with Velcro and girth loops with screw adapters
    • External elastic loops for cord management etc
    • Also functions as a holder for spectacle straps
    • 5 x 15 cm loop on the outside for patches
    • All color options offer good NIR performance
    • 5-year material and product warranty
    • Gemaakt in Finland
    TECHNICAL SPECIFICATIONS
    • Weight: 50 g
    • Fabric: 500D Cordura (100% polyamide)
    • Strap: 100% polyester
    • Buckles: steel
    DESCRIPTION The internal elastic webbing compartments are designed for our locally common Senop lead discs (45 x 60 x 5 mm), as used by the Finnish Defence Force, but they can also fit various other gear. In the large space under the elastic bands, a block of max. 100 x 60 x 20 mm, the two smaller weight compartments each fit a block of max. 45 x 60 x 15 mm. The pouch can be attached to the back of your helmet/cover with Velcro and two adjustable straps. The straps come with screw buckles, attach these to the rear chin strap/rail screws on your helmet, place the pouch where you want it and thread the two straps through the screw buckles. If you fasten the straps properly, they will ensure that the pouch does not lie around when you weigh it down. If your helmet has rails with suitable attachment points, then you may not need to use the buckles. Because the pouch is open on the sides, you can guide the elastic of your goggles through it and the pouch will stay firmly in place on the helmet no matter what. The elastic loops on the outside allow you to guide and tidy up cords, attach glow sticks, etc. Even if the straps are attached to the inside of the back wall, there's still some loop surface you can use to store small patches when you're not using them. No weight plates included, these are sold separately: NVD counterweight kit.
    Select options Details
  • Savotta NVD Counterweight Pouch V2 Savotta NVD Counterweight Pouch V2

    Savotta NVD Counterweight Pouch V2

    €46,45
    A larger counterweight bag for Finnish Senop lead weights and 10 x 10 cm identification plates. Designed to work with the usual Ops Core FAST XP high cut helmet and our High cut helmet cover V1. KEY FEATURES
    • Internal elastic compartments for lead weights
    • Designed for six weight discs of 45 x 60 x 5 mm
    • Can also carry weights of other shapes and sizes
    • Attaches to helmet rail with screws and loop
    • Upper fastening straps for our High cut helmet cover V1
    • External elastic loops for cord management etc.
    • Also functions as a holder for spectacle straps
    • 10 x 12 cm loop on the outside for patches
    • All color options offer good NIR performance (read more)
    • 5-year material and product warranty
    • Gemaakt in Finland
    TECHNICAL SPECIFICATIONS
    • Weight: 60 g
    • Fabric: 500D Cordura (100% polyamide)
    • Webbing: 100% polyester
    • Buckles: steel
    DESCRIPTION The internal elastic webbing compartments are designed for our locally common Senop lead discs (45 x 60 x 5 mm), as used by the Finnish Defence Force, but they can also fit various other gear. In the large space under the elastic bands, a block of max. 100 x 80 x 20 mm, the two smaller weight compartments each fit a block of max. 45 x 80 x 15 mm. Because the pocket is open on the sides, you can guide the elastic of your goggles through it and it will stay firmly in place on the helmet no matter what. The elastic loops on the outside allow you to guide and tidy up cords, attach glow sticks, etc. The included screw buckles allow you to attach the case very securely to the back of your helmet, so that it does not move when it is weighted. The fastening buckles work with Ops-Core, Galvion and similar rail screws. The upper attachment straps attach to the 25mm webbing on our High cut helmet cover V1. No weight discs included, these are sold separately.
    Select options Details

Title

Go to Top