Pouches Archieven

Agilite General Purpose Pouch

€53,95
Low-profile general-purpose pouch to store and organize essential items without sagging or flapping

MOLLE mount on the back (3 MOLLE slots on the front and 3 MOLLE slots on the bottom)

Pass-through for attachment to all straps

Built-in shock cord gives you the ability to tie items internally without wobbling or sagging.

Shock cord also serves as an attachment point for a Tourniquet

Built-in internal organization, including a loop for attaching velcro inserts.

Proven in battle in Israel

Sizing

Fits in one size

Can be attached to any MOLLE surface: Occupies 3 MOLLE slots at the bottom and across

Specs

500D CORDURA® Mil Spec Tactical Nylon

Milspec WebbingYKK Zippers

Drainage hole

*Content not included, for illustrative purposes only.
Select options Details
Savotta Side pouch 12L

€54,90 – €64,90
Really nothing special, but exactly what you need for a side pocket on your backpack. The zipper is covered for extra water repellency and protection against wear and dirt. The vertical webbings on the front keep the compression straps of your backpack neatly in place over the pouch, so that they can also compress the pouch well. These can also be used as attachment points for bungee cords, carabiners, and things like that. A 25 mm webbing loop and D-ring on the top of the rear inner wall make it possible to secure small and important items, the flat rear compartment provides rudimentary organization for smaller items. The bottom and the lower half of the sides are lined with 210D polyamide for extra wear resistance. A through-through opening allows for the drainage of water that could seep into the bag. The back is equipped with our standard PALS fastening web belt system with folding tabs. The middle horizontal rows were omitted because they didn't really do anything other than add weight. We are not a manufacturer of ultra-light stuff, but even we do not like unnecessary weight. The two vertical fastening straps leave an approx. 9 cm wide gap, so you can carry items such as axes, fishing sticks, etc. behind the pouch. Optimal attachment requires a width of four channels and a height of six (min. five) rows of PALS webbing. The compression straps on the side of the backpack, when put on, will prevent any movement of the backpack and its contents. Of our own packs, we recommend the 12L side bag only for the Jääkäri XL. While this is not recommended, you can also make the bag suitable for smaller bags with an absolute minimum of six rows of PALS webbing on the sides, by attaching the bag a step higher and accepting that the bottom becomes a little limp. Examples of use With a capacity of twelve liters, this is a very large side bag, the PALS attachment is five channels wide. Best used on large and high backpacks of 70-100+ liters. Here are some examples of what will fit in such a bag:

A tarp, hammock, duvet and accessories.

A lightweight puff coat, pants and rainwear

A Trangia 27 series stove, fuel, water and lots of stuff to cook.

A Jetboil cooker, a few gas cartridges, water and lots of cooking utensils.

A few days of rations and snacks

A week of spare underwear, intermediate layers and socks.

All kinds of big special stuff that you need to take with you.

Key features

Capacity approx. 12 litres

Covered zipper

Front vertical loops for compression straps

Internal D-ring for attaching small items

Internal flat rear compartment

Reinforced bottom and sides

PALS-compatible mounting system

Water drainage opening at the bottom

5-year material and manufacturer's warranty

Made in Finland/Estonia

Technical specifications

Weight: 320 g

Dimensions: 21 x 45 x 12 cm (W x L x D)

Main material: 500D Cordura (100% polyamide)

Lining: 210D polyamide

Webbing: 100% polyester
Select options Details
SnigelDesign Canister pouch -15

€54,95
Weight: 100 g Dimensions: L= 25, W= 7 & D= 7 cm Fits in: Large spary cans Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:
A light weight pouch for your large spay canister that keeps it secure, which is easy to use and attach on the equipment belt

The pouch is securely attached to the belt or vest

elcro closed flap.

The Velcro patch makes it possible to fast and easy close the pouch

The pouch will not absorb water, will not rot or get soft in the rain

Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
Add to cart Details
F.A.B. Defense Scorpus PG-9

€54,95
The FAB Defense Scorpus PG-9 double magazine bag, with its slim and compact design, provides a perfect fit for double-row Glock magazines. It features an innovative 8-step manually adjustable tensile resistance. This innovative system is specially designed for fast pulling and safe carrying. Details:

Provides excellent protection for warehouses

Slim and compact design.

Innovative, manually adjustable tensile resistance in 8 steps.

Pressure tab for tight and secure fit.

Paddle with 35-degree angle adjustment.

Durable glass fiber reinforced polymer composite construction.

Includes belt clip and paddle.

Suitable for 9mm and .40 GLOCK 17/19/22/23/25/26/27/31/32/33/34/35/37/38/39 magazines.

Weight: about 121 g.
Add to cart Details
Snigel Small Dump Pouch -12

€54,95
The perfect little bag to dump your empty magazines into during a firefight. Also useful for storing gloves, hearing protection, etc. Use it to store evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things that you don't want in your hands. You wear it rolled up in the bottom of the equipment vest. Pull the square D-ring if you want to open the pouch. Zipper at the top. Accommodates 4 warehouses. Attributes

Article number: 22-00301-56-000

Weight:160 g

Dimensions: 24 × 16 × 9 cm
Add to cart Details
Condor Tactical Response Bag

€54,95
The Condor Tactical Response Bag is a great way to get organized for any emergency. With a large amount of pre-divided compartments, you can quickly store your essentials. The bag comes with a hidden all-purpose pistol holster in a hidden pocket with Velcro.

Main compartment with removable divider

Two adjustable side pockets

Two pen compartments

A tactical pocket for flashlight

Four accessory pockets with hook-and-loop closure

Two zippered compartments

Detachable padded shoulder strap

Concealed carrying pocket

Volume: 494 Cu In // 8 L

Overall size: 9.5"H x 13"W x 4"D

Overall size: 4.13 cm x 33.02 cm x 10.16 cm.

Imported

*Content for illustrative purposes only, not included.
Select options Details
Not in stock - on order

Snigel Zipped Dump Bag -10

€54,95

The perfect pouch to quickly put your empty magazines in during a firefight. Also useful for storing gloves, hearing protection, etc. Use it to put evidence or other important things in during a raid Basically, the pouch is designed to temporarily carry things you don't want in your hands Is worn rolled up in the bottom of the vest Pull the large D-ring when needed The drawstring with drawstring closure at the top can be tightened to tighten the opening of the pouch Capacity: 10L Suitable for: 8-10 x 5.56 magazines, earmuffs, gloves etc. Beware: Equipment vest, belt etc.

Details
SnigelDesign Shotgun shell pouch -06

€56,95
Features:
The bag for shotgun ammunition

Carried on your leg for easy access to a bag full of shotgun cartriges

Elastic mesh top for easy access and semi secure storage

Flap opens up out so it won´t block the access to the ammunition

Flap with velcro closure to really secure the contents of the bag

Velcro attachment system makes it possible to attach the holder on any equipment vest, leg atatchment or belt.

Weight: 160 g Dimensions: H22 x W18 x D8 cm Fits: >30 shotgun shells Fits on: Equipment vest or on a leg platform
Select options Details
Warrior Assault Systems Medic Rip Off Pouch

€57,90

The patent-pending Warrior's Medic Rip Off Pouch fits a wide variety of medical equipment. Elastic compartments and tabs organize the kit in order of use. Space for 2 x C.A.Ts 2 x compression bandages 2 x Quick Clot Combat Gauze Bolin Chest Seal Airway Scissors The pouch is held firmly in place by Velcro and supported by webbing. Pull back the Velcro and use the pouch in the traditional shape or pull the pouch to tear the pouch off the panel. Thus, it can be immediately passed on to another user or injured person, and the owner can continue with the mission or go to the target. The Medic Rip Off pouch takes up 4 rows of MOLLE on any compatible chest strap or bag. *Content not included, for illustrative purposes only.

Add to cart Details
Not in stock - on order
5.11 Tactical Flex Tacmed Pouch

€58,95
High speed is lifesaving when a team member goes down. Our 5.11 Tactical Flex TacMed Pouch brings resistance back into your first aid action with a quick-to-pull, drop-down opening at the front where bungee cords, pockets and elastics keep life-saving supplies in front and ready to go. However, rapid deployment is just the beginning. An additional compartment at the back, with a bungee retention belt, can store a few AR magazines or other equipment. The N500D construction means that the Flex TACMED Pouch can survive years of abuse, while our FLEX-HT™️ Fastening System keeps everything in place. The laser-cut MOLLE platform on the front is ideal for accessories and patches and the lower elastic band is perfect for a turnstile. Dimensions 8"H x 7.0"L x 2.0"D Weight 0.27kg Attributes

Carrying TacMed supplies and double AR magazines

FLEX-HT™️ Mounting System

Front laser cut platform for accessories or patches

Quick pull drop front opening for access

Bungee compression fastening system

Elastic bands and organization pockets

Magazines compartment with compression belt

Elastic band and drain holes on bottom panel

500D Nylon |500D

*ATTENTION! Pouch without contents. Content is for illustrative purposes only and must be purchased separately.
Details
Agilite Pincer™ 2nd Layer Admin Pouch

€59,90 – €69,90
Attaches quickly and easily to the front of the Agilite Pincer™ Placard, giving it a whole new level of organization, storage, and capability in one compact package.

Features a low profile with easily accessible administration pocket with both internal organization and a loop area for attaching velcro inserts.

Double side panels with laser-cut MOLLE, perfect for attaching Pincer™ Pistol Mag pouches or other single-column pouches of your choice.

2 internal elastic loops on the back, ideal for storing chemlights, trauma scissors, markers, pens and more.

Fits directly on the Agilite Pincer Placard* *This will NOT fit on any placard system other than the Agilite Pincer Placard. Dimensions: 47*13*3cm (18.5*5.1*1.1 inches) Weight: 0.3lbs (132g) Material:

500D CORDURA® Mil Spec Tactical Nylon

Laser cut Squadron™ laminate

Laser cut Velcro overlapping panels

*Pincer Placard™ is not included
Select options Details
SnigelDesign Twinn handcuff pouch -11

€59,95
Weight: 50 g Dimensions: L= 14, W= 11 & D= 4 Fits in: Handcuffs Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:
A light weight pouch for two handcuffs, that keeps them silent and secure, which is easy to use and attach on the equipment belt

The pouch is securely attached to the belt or vest

Fits normal and large handcuffs

Press button closure with Velcro patch

The Velcro patch makes it possible to fast and easy close the pouch

The pouch is fully padded to reduce the rattling of the handcuffs and to make the pouch as strong as possible

The pouch will not absorb water, will not rot or get soft in the rain

Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
Add to cart Details
Snigel MG Ammunition pouch -09

€60,95
MG AMMUNITION BAG -09 Fits in it: 200 x 5.56 mm or 200 x 7.62 mm or 200 cassette Beware: In your hand, over your shoulder or on the equipment vest functions:

The perfect case to carry ammunition for the SAW/Minimi machine gun

For 200 rounds coupled 5.56 ammunition free of charge or in a cassette

Also suitable for 7.62 coupled ammunition

Can be used for 2 Cal 50 warehouses

Webbing on both sides for attaching small bags

The pouch can be attached to the vest or worn in a shoulder strap (not included)

Specifications:

Article number: 22-00511-09-000

EAN: 7332673301539

Weight: 300 grams

Dimensions: 18 x 19 x 8 cm

Category: Holders & bags

Color: Grey
Add to cart Details
Snigel Large handcuff pouch -15

€60,95

A lightweight bag for your large handcuffs, which keeps them quiet and secure, easy to use and attaches to the equipment belt. The pouch is securely attached to the belt or vest Suitable for normal and large handcuffs Snap fastener with Velcro The Velcro closure makes it possible to close the pouch quickly and easily. The pouch is fully padded to reduce the rattling of the handcuffs and make the pouch as strong as possible The pouch does not absorb water, does not rot and does not soften in the rain The foldable fastening system makes it possible to attach the pouch to any vest or belt. The pouch can be attached to the belt without removing what is already on the belt. Open the fastening straps on the back of the case. Place the pouch on the outer belt. Thread the fastening strap under the horizontal strap on the pouch and close the fastening straps. Fits in: Handcuffs Beware: Service belt, Leg Platform, Equipment Vest and on the belt Weight: 60 g Dimensions: 11 x 11 x 4 cm

Add to cart Details
Agilite AG3™ Placard Triple Mag Pouch

€62,95 – €71,45
The Agilite AG3 Placard is a bungee retention placard that allows you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way.

Suitable for three 5.56 magazines and can be attached to any plate holder with G-hooks or Placard buckles (both buckles and G-hooks included with the placard).

Bungee retention warehouse bags have been used for more than a decade because they hold warehouses well, but they have an inherent, annoying flaw. They make removing or returning a warehouse inconvenient, with two hands and two movements, because the warehouse keeps hooking on the bungee tabs.

AG pouches solve this age-old problem and go from HALO jump-level retention to safety off, mag draw, may re-index and back without ever taking your dominant hand off your weapon.

The custom-polymer pull tabs also allow both mechanical and friction grip to get the perfect grip, with or without gloves.

Whether you're defending your country at the tip of the spear or defending your family, AG pouches give you a head start.

Sizes

Fits three 5.56x45 AR or M4 rifle magazines.

The AG3 Placard fits ANY plate carrier and is equipped with both G-hooks and MOLLE buckles.

Specifications

500D CORDURA® Mil Spec Tactical Nylon |

Laser cut Velcro MOLLE overlay

Suitable for three 5.56 warehouses

Height adjustable

Weight: 0.16 kg

Including mil-spec G-hooks

Including mil-spec Polymer MOLLE Placard buckles

Details

Suitable for three 5.56 warehouses

Makes it easy to pull or place a magazine with one hand

Proprietary polymer pull tab for exceptional grip

Reliable retention to never lose a warehouse

With hook closure, to be attached to any plate carrier that Placard is capable.

Proven in battle in Israel

Smart retention lip meets military requirements without obstructing access to the bag
Select options Details
Agilite AG3™ 5.56 Triple Mag Pouch |

€63,95 – €64,95
Agilite AG Mag Pouches are bungee retention pouches that allow you to easily and quickly pull or reindex warehouses with just one hand and without bungee retention tabs that get in the way. Bungee retention may pouches have been in use for over a decade because of how well they hold warehouses. but they have an inherent, annoying flaw. They make the removal or return of a mag a clumsy, two-convenient, two-motion process because the magazine sticks to the bungeelusjes. This is especially problematic with "tac reloads". AG pouches solve this age-old problem and go from HALO jump-level retention to safety, magazine pulling, magazine re-indexing and back without ever taking your dominant hand off your weapon. We don't believe in taking both hands off your weapon during a firefight, because we come from an environment where time outside the target and outside the weapon when the bullets fly around can easily cost you your life. Sometimes you can't miss that time to intervene again, because by grabbing you have to look down or take your second hand off your weapon. AG pouches use a combination of specially developed polymer pull tabs and various reinforced materials that work together to provide the retention level of closed-top pouches, but the fast pulling ability, without hooks, of open-top pouches. Your equipment should allow you to focus on the threat – it shouldn't bother or annoy you. The custom-made polymer pull tabs allow for both mechanical and friction grip for a perfect grip, with or without gloves. We don't believe in normal just because we've always done something a certain way doesn't mean we can't rethink it and evolve it to provide small but crucial benefits that improve your performance, comfort and safety. Whether you're defending your country on the tip of the spear or defending your family, AG pouches give you a head start. Details

Suitable for three 5.56 warehouses

Makes it possible to easily pull and insert the magazine with one hand

A patented polymer pull tab for exceptional grip

Reliable retention to never lose a warehouse

Built-in MOLLE rear mounting

Tested in battle in Israel

Smart retention tab meets military requirements without obstructing the entrance to the pouch

Specifications

500D CORDURA® Mil Spec Tactical Nylon

Laser cut Velcro MOLLE overlay

Takes 3 MOLLE slots down and 6 MOLLE slots transversely

Weight: 0.35lbs (0.16kg)

Sizes

Suitable for three 5.56x45 AR or M4 rifle magazines

Takes 3 MOLLE slots down and 6 MOLLE slots transversely
Select options Details