-
Not in stock - on order
The RPC is the latest evolution of Warrior Assault Systems carriers. Designed as a lightweight and versatile low-profile wearer that offers enhanced mobility without sacrificing protection. The RPC is designed to make medium and large SAPI and ESAPI stand-alone s and the most common 10" x 12" I.C.W.s available. The bags are supported with 3D mesh for added ballistic performance comfort and body heat removal. The Recon carrier comes standard with ladder-style tummy straps that are attached to the front of the RPC via 2 removable ITW SR clips. This allows for quick access when entering and disembarking the RPC (ITW SR clips have a combined breaking strength of 600 lbs per side). The shoulders of the RPC can be worn in 3 different configurations as a smooth low profile with the addition of Velcro-lined shoulders and wrap around the sleeve for hydration and communication. The RPC comes standard with a removable MOLLE front cover held in place by 2 vertical SQM clips and strong Velcro, allowing the panel to be removed and replaced with a wide range of preconfigured weapon-specific pouch panels and Warrior's new Pathfinder Chest Rig. The RPC can be integrated with Warrior's new rear panel Made of high-quality fabric -
Not in stock - on order
With the quick-release fastener set, you can put on and take off your record in a matter of seconds.- Donning and doffing in seconds
- 1-hand operation
- Self-cleaning ports
-
Not in stock - on order
With the AMAP III Conversion Kit you can attach the Agilite AMAP III and other Agilite accessories directly to ANY plate carrier. Agilite-plate carriers are already equipped with the K-Series fastening system that allows you to attach assault packs directly. However, if your department or military unit requires a non-Agilite carrier, the conversion kit can be retrofitted in minutes and makes any plate carrier compatible with Agilite attack suits or hydration systems. After installation, you can put on and take off your Assault pack in seconds. The Conversion Kit is very unobtrusive, so it can be permanently applied to your back carrier or quickly removed when you are not using it. Why would I want to attach my attack pack directly to my plate carrier? By attaching your assault pack directly to your Plate Carrier, you'll be with one grip on your gear and survival system, whether it's out of your cage, your vehicle or from under your bed. When you need to get the HELO or when you're facing a bad guy, you have your Plate Carrier, armor, ammo, helmet, eye protection, supplies, etc. in one graspable unit, reducing your reaction time. It also means that in a firefight, you don't have shoulder pads on shoulder pads, all of which move independently of each other and unnecessarily swell your shoulders and forecloth. All your gear works as 1 unit, and does not hinder your rifle or head manipulation. Details- This allows you to attach the AMAPIII assault pack directly to ANY plate carrier with MOLLE (not just Agilite plate carriers), in seconds
- Consists of 1 central attachment and 2 connecting buckles
- Can be quickly and easily installed on or removed from any plate carrier
- Once installed, you can turn AMAP III on and off in seconds
- Equipped with loop/buckle attachment points to make the wearer Agilite-compatible
- 1 size
- Fits any plate carrier with at least 2 rows of 4 horizontal MOLLE loops (or more)
- Height: 30cm (11.8")
- Width: 15cm
- Depth: 8mm
- 500 Denier Mil Spec Tactical Nylon
- Mil Spec Plastic Hardware
- Fits any plate carrier with 6 horizontal MOLLE loops (or more)
-
A plate which can be mounted instead of one of the plates on our dual side covert harness. On this plate, a pistol holster or any other pouch in our sortiment can be attached. -
With the K19 Back Flap Cummerbund adapter you can attach the Warfighter Cummerbund or other cummerbunds with Velcro to the K19 Plate Carrier (versions 2.0 and 3.0). Attaches to the back of the K19 Plate Carrier via MOLLE. *Plate carrier for illustrative purposes only. -
With the Agilite Molle Placard you can easily expand your plate carrier with molle rows. The back of the placard consists of velcro and 2 G-hooks. -
Not in stock - on order
The Mil-Tec Plate Carrier Vest Gen. II is a ballistic protection plate insert with modular webbing on the front, back and side of the vest. With this plate carrier, the abdominal band can be omitted, resulting in a light and flexible plate carrier that is closed by a belt with a Fastex buckle. Material 100% polyester (Oxford) polyvinyl chloride coated shoulder straps: 100% thermoplastic elastomers Details:- Molle loop system on the front and back, as well as on the side straps
- 3 rubber loops on the front for attaching equipment
- Small pocket with Velcro at the front
- 3 Velcro strips on the front for attaching patches
- Full front opening of the vest with 3 large, strong Velcro closures
- Shoulder straps can be opened with Velcro
- The vest can be quickly put on and off thanks to the elastic band system on the back
- Front and rear plate ceramics level III and IV can be used
- Internal belt holder for ceramic plates 25 x 30 cm.
- Weight: about 930 grams
-
Not in stock - on order
TacTec™ Plate Carrier Side Panels are rugged and durable pouches engineered to complement the TacTec™ Plate Carrier System by providing secure storage for protective ballistic plates, maximizing protection in hostile environments. Each pouch features reinforced attachment straps for stable carry and a laser-cut web platform on the face for fully customizable accessory storage. Compatible with the 5.11 SlickStick™ attachment system.FEATURES DETAILS
- Ballistic plate storage for the TacTec™ Carrier
- Laser-cut web platform for additional storage
- Reinforced attachment straps
- Compatible with the 5.11 SlickStick™ system
- Sold as a pair
- Fits 6" x8" plates with a thickness of up to 1"
- Imported
-
Side plates are vital to staying alive in a gunfight, but are often bulky and clunky. The Agilite Flank™ side plate carriers ensure that your side plates have a low profile, are comfortable and integrate seamlessly with your Plate Carrier. - Incredibly low profile and lightweight for maneuvering in tight CQB environments - Fits 6"X6" or 6"X8" side plates - Can be mounted both internally and externally via MOLLE low-profile mounting - Integrated low profile rib cage to prevent chafing - Compatible with all MOLLE Cummerbunds including the K-Zero Plate Carrier (internal mount), K19 Plate Carrier (external mount) and WarFighter™ Cummerbund. Sizing - Fits 6"X6" or 6"X8" side plates (including Blindside™ side plates) - Compatible with the following Agilite platforms: K-Zero plate carrier (internally mounted) K19 plate carrier (externally mounted) Warfighter™ garter (internally mounted) **FLANK™ SIDE PLATE CARRIERS ARE SUPPLIED IN PAIRS** Dimensions: 7*6.5*8 inch(18*17*20cm) Weight: 90gr Materials: - Laser cut Velcro overlay panels - 500D CORDURA ® Mil Spec Tactical Nylon *plate carrier not included, for illustrative purposes only. -
Agilite Retractor ballistic side plate carriers allow you to add additional ballistic protection to your installation to give you extra vital organ protection when used in high threat environments. They can be connected to ANY MOLLE Cummerbund or other MOLLE platform, not just Agilite platforms, and are lightweight, wear-resistant and intelligently designed to be the only side plate carriers you will ever need. The unique Israeli design ensures that a standard Special Forces 6 "X6" plate fits perfectly, but also expands directly to fit a 6"X8" Infantry issued plate, just a sine if you have missions that require extra coverage or if that's all you have access to during a deployment. Designed, tested and manufactured in Israel, they fit into SAPI. ESAPI or other common ballistic side plates up to 1 inch thick. Retractor side plate carriers can also be used to hold non-ballistic training plates to prepare you for the front lines and make your Crossfit or other training session more serious and challenging. Note: Side plate carriers with retractor are non-ballistic and are not export restricted - they are only a carrier platform for ballistic side plates. Specs:- Mil Spec 1000d tactical nylon
- Includes Agilite polymer handle
- Made in Israel
-
Attacks usually don't happen if you have your full gear on hand. The Agilite Laptop Carrier gives you the ability to take a hidden emergency system with you wherever you go. The Agilite Laptop Carrier™ was initially designed for Israeli secret security services to blend into civilian environments, but always maintain emergency protection, equipment and a minimalist platform from which to fight. It fits soft or hard armor inserts and can go from laptop bag to plate carrier in seconds, so you can attack a shooter quickly and hands-free. As professionals who carry laptops every day, it was just as important to us that the day-to-day functions were as well thought out as the emergency functions. It fits all common laptop sizes, including 15.6". It also has storage compartments for a computer charger, mouse, headphones, tablets, notebooks, keys and other essentials. It's also designed for rifle and pistol magazines, turnstiles and knives, and more. It has a special Loop CCW area for attaching holsters. The included Gray man cover can be removed in seconds to reveal a loop area for ID patches. If bullets are flying around, it is important that you are recognizable to friendly troops as an aid worker and not as a threat. The Laptop Carrier will not look out of place in a coffee shop, a university campus, a business meeting or with executive security staff. Details- Suitable for all common laptop sizes, including up to 16".
- Storage compartment for computer charger, headphones and more
- Also serves as a 100% concealable plate carrier for emergencies
- Goes from shoulder carrier to plate carrier in seconds
- Fits soft or hard armor plates up to 11"x14"
- Quick access to CCW bag for pistols, magazines, turnstiles and more
- MOLLE loop area for ID patches with removable 'Grey Man,' cover
- Passage for rear luggage handles
- 500D CORDURA® Mil Spec Tactical Nylon.
- Dimensions: 12.9"x17.7"x2.3"
- Weight: 624g
- Main compartment for hard or soft armor plates 11"x14" or smaller
- Special compartment for soft armor plates of 9"x14" or smaller
- Suitable for all common laptop sizes up to 16".
- One size fits all body types
- Main compartment for hard armor and/or Soft Armor plates 11"x14" or smaller
- Special compartment for soft armor plates of 9"x14" or smaller
- Suitable for all common laptop sizes up to 16".
-
The Warfighter™ Cummerbund is the most advanced semi-rigid cummerbund plate carrier on the market. It was designed in collaboration with both Israeli and U.S. Special Forces to solve all comfort and functionality issues with load-bearing cummerbunds. Compatible with any plate carrier with hook and loop surfaces, including the K-Zero Plate Carrier and the K19 Plate Carrier (2.0 and 3.0 versions) with the Cummerbund MOLLE back flap adapter. Most stretch cummerbunds sag under the weight when wearing heavy gear such as radios and sideways armor. The Warfighter Cummerbund is semi-reinforced to support heavy loads, stretches for comfort and maneuverability, but will never sag, even under heavy loads. Allows you to quickly and easily switch between Velcro flaps, quick-release fasteners or FirstSpear Tubes®, on both sides, so you can adjust your cummerbund exactly the way you want it. Equipped with three rows of MOLLE, for maximum mounting possibilities, both internally and externally. Despite this, it retains a lightweight, skeletal design that ensures maximum airflow and keeps you cool under fire. The Warfighter Cummerbund is compatible with the K-Zero Plate Carrier without the need for accessories or modifications. It is also compatible with the K19 Plate Carrier by adding only the modular MOLLE flap on the back. It is compatible with Agilite Flank™ hard sideways armor carriers and all other common sideways armor, radios, pouches and more. Whether you're defending your country on the tip of the spear, defending your community, or defending your home, the Warfighter cummerbund will give you an edge.
*Compatible with K19 Plate Carrier by adding Cummerbund Backflap Adapter.
Specs
Compatible with FirstSpear Tubes® and other quick-release fasteners
Dimensions:
M: 57*14*1cm(22.5*5.5*0.5 inches)
L: 25*5.5*0.5 inches (64*14*1cm)
XL: 28*5.5*0.5 inch(72*14*1cm)
Weight:
M: 126gr
L: 140gr
XL: 152gr
Materials:
- Laser cut Velcro overlay panels
- Laser cut Squadron™ laminate
- 500D CORDURA® Mil Spec Tactical Nylon
- CURV® thermoplastic composite material
-
Not in stock - on order
Warrior's discreet Armor Carrier has large plates in front, rear and stand-alone side plates. The RICAS Compact also has Nexus Level 3a Soft Armor on the front, back and inside around the arms. Offers 10% less protection than the original RICAS but offers improved mobility. Fully adjustable. -
Size: small to medium 34" to 42" breast 86cm to 106cm chest Size: medium to large 42 " to 50" breast 106cm to 127cm chest The DCS is a lightweight, low-profile system that is robust yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators. The DCS is suitable for both Special Forces requirements and PSD operations. The shoulders are fully adjustable and have an emergency release on one side which frees the left shoulder area and allows the operator to remove the rig without having to remove the operator's helmet. The side sections of the DCS are fully adjustable in size and can be adjusted in less than 15 seconds. 3D spacer mesh lining is used for comfort and allows body heat to move away from the body surface while helping with airflow to provide cooling. The DCS is designed to be worn in conjunction with the Warrior PLB Belt, Frag Belt and Low Profile Molle Belt (sold separately). -
5.11 Tactical® brings you the TacTec ™ Plate Carrier, which is designed to be the most lightweight and best-fitting plate carrier you can find and constructed to ensure high performance while remaining light and mobile. Dimensions Suitable for 24 mm wide medium (12.5" H x 9.5" L x 2 "B) and large (13.25" x 10.25 " x 2.25") SAPI plates Standard abdominal straps are suitable for a circumference of 52" with the elastic relaxed, and up to 57" when fully stretched DETAILS FEATURES Improved comfort and freedom of movement Suitable for medium or large ballistic plates Shoulder pads on the back yote evenly distribute the weight Hard-wearing 500D nylon Adjustable waist and tension bands (sizes XS-XL) Extendable GrabDrag handle for emergency exfiltration Quick-tensioner with one hand Water-repellent coating Extra-large airflow panels Durable Duraflex® hardware Web ID loop Suitable for Rogue® men's and women's weight vests -
The Condor Vanquish RS plate carrier from the Vanquish Armor System (VAS) is made of a robust nylon construction and has fast-opening connectors that allow the user to quickly remove the carrier in an emergency. Compared to conventional MOLLE loops, the Lasercut MOLLE is lighter, more resistant to cracks and has a flat profile. The Vanquish RS Plate Carrier can be individually adapted to the missions, for example it has removable front/back cushions, laser-cut MOLLE and laser-cut MOLLE Velcro on the front and back. Suitable for Medium and Large Swimmer / ESAPI plates up to 25 x 30 cm. Material- 100% polyamide
- Inner lining: 100% polyester
- Quick release system with ROC buckles on the shoulders and sides.
- Laser-cut MOLLE laminate on the front, back and sides.
- Adjustable shoulder straps.
- Adjustable abdominal strap with Velcro pockets for ballistic inserts.
- Removable inner lining.
- Flat card/ document bag with Velcro closure.
- Easily accessible plate bags.
- Suitable for protective plates up to about 25 x 30 cm.
- Recovery handle.
- Velcro surfaces on the front and back for ID patches.
- Compatible with VAS accessories.
- Weight: about 1189 grams.
