• This kit includes everything you need to make all kinds of elastic cord things like zigzag attachment things for backpacks etc. KEY FEATURES
    • 400 cm elastic cord
    • 4 strong drawstring closures
    • Think, cut, burn, baste, and you're done
    • 2-year material and product warranty
    • Made in Finland/Estonia
    TECHNICAL SPECIFICATIONS
    • Weight: 45 g
    • Dimensions: 11 x 15 x 2 cm (W x L x D) (in packaging)
    • Elastic cord: polyester/rubber
    • Drawstring closures: polyamide
    EXAMPLES You can do a lot with this kit, here are a few examples:
    • An elastic zigzag or similar attachment thing on the outside of a backpack.
    • And probably a lot of other things.
    • Most people will probably use these for all kinds of attachment things. The included 400cm cord and four drawstring closures should be enough for a pair or even four of these things, depending on the size and design of the thingy.
  • Savotta Helmet Camo Scrim

    19,9022,90
    While natural foliage is the ultimate helmet camouflage, a bushy cover with a 3D effect might be the next best thing. Quick and easy to use, easy to customize. They effectively break up helmet silhouettes and provide quick camouflage adjustment to suit different environments. The design is very simple, a single flat piece of 500D Cordura with alternating zigzag shapes cut into it. The zigzag pattern is positioned in such a way that it creates an opening for NVG mounts on the front. Small slits have been cut around the edges for the elastic cord. Thread the elastic cord through the slits, tie it at the back, and pull it over your helmet like a shower cap. Finish it off by pulling back any excess material and rolling it underneath yourself to tighten the cover. If you want to adjust the fit, you can play around with threading the elastic cord through the slits and zigzag pattern in different ways. And if you get really wild and feel the need: you can even cut off excess material from the cover, but of course, such huge adjustments are at your own risk. KEY FEATURES
    • 3D Effect Camouflage Plate for Helmets
    • One-size-fits-most, best suited for high-cut L and XL helmets
    • Lightweight Laser Cut 500D Cordura
    • Quick and easy to apply and remove
    • All color options offer good NIR performance
    • 2-year material and product warranty
    • Gemaakt in Finland
    TECHNICAL SPECIFICATIONS
    • Weight (in retail container): 65 g
    • Dimensions (in retail packaging): 10 x 15 x 4 cm (W x L x D)
    • Fabric: 500D Cordura (100% polyamide)
  • Two different mechanisms for attaching paper to our sleeves. Both have Velcro at the back. FBM-10B= Is an international 2-hole mechanism. 85 mm between the rings and the rings have a diameter of 40 mm. 50-00019-01-000= Is a Swedish standard mechanism with 4 holes. Color: Olive
  • Attach the pouches to the Velcro panel or in the organized bag 4 color-coded zippered pouches to keep medical or technical equipment organized. Small bags: 18x16x7 cm and large bags: 32x15x7 cm 7 cm high sides Velcro on the back to attach the pockets to the Velcro panel in the Specialist backpack small Color-coded to make it easier to find what you're looking for Fits: Anything – medical equipment, technical equipment, or personal items Beware: In the backpack, specialist, small *Content for illustrative purposes only.
  • Not in stock - on order
    The perfect pouch to quickly put your empty magazines in during a firefight. Also useful for storing gloves, hearing protection, etc. Use it to put evidence or other important things in during a raid Basically, the pouch is designed to temporarily carry things you don't want in your hands Is worn rolled up in the bottom of the vest Pull the large D-ring when needed The drawstring with drawstring closure at the top can be tightened to tighten the opening of the pouch Capacity: 10L Suitable for: 8-10 x 5.56 magazines, earmuffs, gloves etc. Beware: Equipment vest, belt etc.  
  • Soft polymer magazine holder with MOLLE attachment for a 5.56 magazine. Can be attached to a belt or to the MOLLE loops on a patrol vest or combat bag. The holder can be attached both up and down. Compatible with FAMAS, HK416 and AR15 magazines.
  • With this patented combination lock you can secure your belongings in the suitcases of Explorer Cases. Due to the close fit of the locks, they stay in place and do not come out of the case.
  • Not in stock - on order
    The Gripper Slip-On Grip from Pachmayr has a unique design and contour, allowing it to fit a wide range of popular medium to large pistols. The Gripper Slip-On has an attractive non-slip texture and palm bulges for better fit and control. The contoured cutting lines allow you to adjust the grip to fit your gun. Perfect for Glock and other polymer frame pistols. Caution: Do not use on handguns with a safety catch.
    • Optimal size for a wide variety of pistols.
    • Can be cut to size and has contoured cutting lines for a clean, even cut.
    • Comfortable finger grooves provide better control.
    • The back of the finger grooves is recessed so that they can be used on pistols with or without finger grooves.
    • Non-slip texture and bulges in the palm for perfect fit and control.
    • The Gripper is made of abrasion-resistant rubber and is insensitive to weather, sweat, oil and solvents.
    • Perfect for Glock and other polymer frame pistols.
    This grip fits the following pistols (some models may need to be modified):
    • Glock 19, 23, 25, 32, 38, and 17, 20, 21, 22, 31, 34, 35, 37
    • S&W M&P Full Size & Compact, M&P M2.0 Full Size & Compact
    • S&W Sigma, SD, SD VE
    • Sig 226, 228, 229, P320 Full & Compact Ruger SR9, 22/45
    • Beretta 92, 96
    • CZ 75, P-07
    • Walther P99
    • Hi Point 380/9mm/40/45 Browning Hi-Power H&K USP
  • This duty holster is designed for the Glock 17 Generation V. It is made of Level 5 injection molded polymer. It is specifically designed for law enforcement officers to wear with their duty uniform. It is equipped with 5 safety latches, making it extremely safe for officers. The weapon is easy to draw and safely holster. The internal retention of the weapon is removed by simply pressing the release pedal with the thumb when you grip the grip (Evolock system). The same pressure on the release pedal automatically tilts the sling forward (Rotoloop system). This holding mechanism automatically snaps back into place when the weapon is encased under its own weight. The sling bar can be manually brought back to the top of the weapon by pulling it with your strong hand. It is equipped with an anti-retraction tab at the front (Roto Guard system). A screw controls the retention force of the weapon, while a 2nd screw adjusts the height of the trigger guard. (STR system). A casing reinforces the contour of the base of the trigger guard to prevent unintended pressure on the magazine printer. A backplate to isolate the weapon's release button (BS-PRO system). It is equipped with 3 screws in a 120° triangle and allows the holster to be rotated on different MULTILINK II version RADAR supports (Low, High, Medium offset, Thigh plate, Multi-brand adapter and Soft Passing Claw). It is available in a right- and left-handed version and is black in color. It can be worn on the belt, but also on the thigh plate and the Molle system. It comes with a 3x120° S-Closer belt offset (RAD-6500-6106). Features
    • 5 retention levels
    • Evolock-S & Rotoloop-S 2-grease automatic safety devices
    • STR System Screw Fixing
    • BS-pro skid plate
    • Protective plate for push-button charger
    • Roto Guard anti-pull tab at the front
    • LTILINK 2 port system for optional accessories
    • Available in right- or left-handed version
    • Color: black (059)
    • Made of injection-molded polymer
    • Includes S-clamp 3x120° (6500-6106)
    COMPATIBILITY
    • Glock 17 Gen 5
    • RADAR support
    • RDC Disc Fuselage RAD-6502-0017
    • SFL fork RAD-6505-0026
    • RSS fork RAD-6507-0017
    • UBM lower belt offset RAD-6500-6506
    • Lower belt offset RAD-6500-6306
    • Medium Belt Loop RAD-6500-0956
    • Combined T-System Paddle RAD-6500-0046
    • Rigid Claw Soft Loop RAD-6500-1187
    • Rigid Soft Double Loop RAD-6500-1197
    • And RADAR adapter for police and Blackhawk thigh plates
  • These Breakthrough Clean Technologies® woven 100% Cotton Knit Patches are ultra-absorbent and effectively clean your firearms. These pre-cut patches are easy to use and available in a wide range of calibers to meet all your weapon maintenance needs.
    • Product length 0.75
    • Product Width 0.75
    • Product height 0.125
     
  • These Breakthrough Clean Technologies® woven 100% Cotton Knit Patches are ultra-absorbent and effectively clean your firearms. These pre-cut patches are easy to use and available in a wide range of calibers to meet all your weapon maintenance needs.
    • Ideal for running from .45 to .58 Cal
    • 100% cotton, ultra-absorbent patches
    • 540 cotton plasters measuring 6.3 x 6.3 cm (2-1/2" x 2-1/2")
  • Not in stock - on order
    With the quick-release fastener set, you can put on and take off your record in a matter of seconds.
    • Donning and doffing in seconds
    • 1-hand operation
    • Self-cleaning ports
  • Expand your tactical gear set with the Agilite Scorpion Patch. Agilite Scorpion patches are available in Ranger Green and Wolf Grey.
  • With the Agilite Molle Placard you can easily expand your plate carrier with molle rows. The back of the placard consists of velcro and 2 G-hooks.
    • 1x Adaptive Rig System Split Rig setup with Tango modules
    • 1x ARS butt pack
    • 2x Grand GP
    • 2x Double mag pouch
    • 1x L4P x EURMED IFAK insert
    This arrangement can accommodate up to 22 M4 warehouses. The parts can be used to build an LBE, split front chest rig or a micro chest rig. The entire setup fits in the included ARS CBRN Buttpack. No mags, meds or radios included. Lifetime warranty. Made of 500d Cordura laminate. NIR-compliant materials.
  • IFAK edition of our big GP bag. Velcro on the front for an IFAK patch. Included TQ bag can be attached on both sides. Modular insert for attaching items on both sides with shock cord (supplied). 4 rows wide molle fastening. Inside lined with Velcro for different inserts. Since our L4P x EURMED IFAK Insert is made for self-help, the Large IFAK is intended for use as a buddy ifak. Also works as a general-purpose bag. No medications or TQ included.
Go to Top