-
Rapax is an extremely breathable and uncompromising light build with low stowage volume for a wide range of tactical applications as well as everyday carry. The seam-free shoulder area eases rucksack carriage without pressure points and prevents intrusion of wetness. Wind deflector prevents cold air to get inside through the zipper. Adjustable waist adjustment straps provide a close-fitting and functional waist design. Designed for medium temperature ranges, but can well be combined with a warm layer for temperatures below freezing. - Extremely breathable - Water repellent sewing yarn - Wind deflector for better insulation - Innovative low profile pocket concept - Comfortable & durable water repellent fabric Material: 97% Polyester, 3% elastane 'YKK' zippers Water repellent sewing threads Shipping weight: 550 g -
Features:The bag for shotgun ammunition-
Carried on your leg for easy access to a bag full of shotgun cartriges
-
Elastic mesh top for easy access and semi secure storage
-
Flap opens up out so it won´t block the access to the ammunition
-
Flap with velcro closure to really secure the contents of the bag
-
Velcro attachment system makes it possible to attach the holder on any equipment vest, leg atatchment or belt.
-
-
The perfect little bag to put your empty magazines in during a firefight. Also good for storing gloves, hearing protectors, etc. Use it to preserve evidence or other important things during a raid. Basically, the pouch is designed to temporarily carry things you don't want in your hands. Rolled up in the bottom of the vest. Pull the square ring down, naturally, when you want to open the pouch. Zipper closed top. The flap can be opened on the inside of the pouch. Accommodates 4 magazines. Attributes Weight: 160 g Dimensions:24 × 16 × 9 cm Color: Grey -
- The size is easily changed with the elastic cord. Low profile to make it easier to work in an open hatch or in a car. The elastic string closure in the top is fast and easy to open. It is threaded through an eye let further down than normal, this makes it easier to fold the elastic string to the side when you want to remove the magazine fast.
- The pull tab is designed to work with magazines with an angled bottom.
- The universal flap, 25-00007-00-000 can be attached on the magazine pouch. The flap has a silent hook opening that is easy and fast to use. Low cut to make it faster to remove the magazine. Inside Velcro patches were small holders for pistol magazines or grenades can be attached 25 mm MOLLE bands on the outside so you can attach other pouches on the outside. Two or more magazine pouches can be attached outside each other. Eyelet in the bottom to let water out. Tuck in attachment system makes it possible to attach the pouch on any equipment vest or belt.
- The attachment systems is easy to use both on standard 25 mm MOLLE systems as well as on the Swedish 20 mm system or on 50 or 60 mm belts.
- The dual holder insert -12, 25-00307-09-000 can be used to hold smaller magazines inside the short speed magazine pouch -12. The insert has 2 elastic holders with adjustable length bottom.
- Stores: 1 x G36 or other 1 x 5,56 or 1 x HK417 magazine or radio, pistol etc.
- Dimensions: W=8 x H=11 x D=3 cm.
-
Make an M-Pact® in the field. If you need control of your bare hands without sacrificing protection, grab the M-Pact fingerless. The next generation M-Pact tactical gloves protect soldiers and law enforcement officers with EN 13594-classified impact protection. D3O® palm filling drains powerful energy to reduce hand fatigue when you're fully engaged. Features- The shock protection of thermoplastic rubber (TPR) meets the EN 13594 impact standard.
- Closure of thermoplastic rubber (TPR) ensures a firm fit on your wrist.
- Breathable TrekDry® keeps hands cool and comfortable.
- Armortex® palm reinforcement.
- Fingerless design ensures maximum agility.
- D3O® palm filling absorbs and drains powerful energy.
- Durable palm of synthetic leather.
- Nylon carry loops.
- You can go in the washing machine.
- Police
- Sports shooting
- Maintenance and repair work
Delivery time + - 1.5 week. -
Weight: 100 g Dimensions: L= 25, W= 7 & D= 7 cm Fits in: Large spary cans Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for your large spay canister that keeps it secure, which is easy to use and attach on the equipment belt-
The pouch is securely attached to the belt or vest
-
elcro closed flap.
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
The Nitecore MT2A is part of the Multi-Task series of lights, which offer incredible performance at a price point never before seen in flashlights of this quality. Useful design features include a removable and reversible pocket clip, anti-roll head, forward click switch with momentary-on ability, smooth parabolic reflector for long throw, able to tail stand for use as a candle and waterproof to two meters. Powered by two AA (alkaline or NiMH but not Li-ion) batteries. The MT2A has four brightness levels plus strobe and SOS flashing modes. With the head in the tightened position the light will activate in turbo mode, lowering the output after three minutes to prevent over-heating. With the head slightly loosened the light will cycle through the other three brightness levels and two flashing modes. These levels have memory function:. Brightness Levels based on 2xAA NiMH 2400 mAh batteries :- Turbo – 345 lumens: 2 hour 15 minute runtime
- High – 138 lumens: 5 hour runtime
- Mid: 55 lumens: 12 hour runtime
- Low: 17 lumens: 50 hour runtime
- LED Premium CREE XP-G2 R5 LED
- Maximum output of up to 345 lumens
- High efficiency current circuit board
- Maximum runtime of up to 50 hours
- Two rapid switching modes suit various user requirements.
- User-defined mode allows for customized brightness levels and a multitude of functions
- Intelligent memory functions
- Anti-rolling design
- Reverse polarity protection
- Toughened ultra-clear mineral glass with anti-reflective coating
- Aluminum reflector ensures a smooth and powerful beam
- Aero grade aluminum alloy
- HA III Military grade hard anodized
- Detachable two-way anti-rolling clip
- Purpose-made rhombic knurling for better grip
- IPX-8 standard waterproof (submersible to two meters)
- Length: 155mm
- Head Diameter: 22.56m
- Tail Diameter: 21.5mm
- Weight: 67grams (without battery)
- Accessories: Clip, lanyard, spare plastic cap, and spare O-ring
-
The Nitecore MT1A is part of the Multi-Task series of lights, which offer incredible performance at a price point never before seen in flashlights of this quality. Useful design features include a removable and reversible pocket clip, anti-roll head, forward click switch with momentary-on ability, smooth parabolic reflector for long throw, able to tail stand for use as a candle and waterproof to two meters. The MT1A has four brightness levels plus strobe and SOS flashing modes. The torch runs on 1xAA alkaline or NiMH battery but cannot use Li-ion batteries. With the head in the tightened position the light will activate in turbo mode, lowering the output after three minutes to prevent over-heating. With the head slightly loosened the light will cycle through the other three brightness levels and two flashing modes. These levels have memory function. Brightness Levels based on 1xAA NiMH 2400 mAh battery :- Turbo – 180 lumens: 1 hour 30 minute runtime
- High – 55 lumens: 5 hour 30 minute runtime
- Mid: 22 lumens: 18 hour runtime
- Low: 5 lumens: 60 hour runtime
- LED Premium CREE XP-G2 R5 LED
- Maximum output of up to 180 lumens
- High efficiency current circuit board
- Maximum runtime of up to 60 hours
- Two rapid switching modes suit various user requirements.
- User-defined mode allows for customized brightness levels and a multitude of functions
- Intelligent memory functions
- Anti-rolling design
- Reverse polarity protection
- Toughened ultra-clear mineral glass with anti-reflective coating
- Aluminum reflector ensures a smooth and powerful beam
- Aero grade aluminum alloy
- HA III Military grade hard anodized
- Detachable two-way anti-rolling clip
- Purpose-made rhombic knurling for better grip
- IPX-8 standard waterproof (submersible to two meters)
- Length: 105mm
- Head Diameter: 22.56mm
- Tail Diameter: 21.5mm
- Weight: 55grams (without battery)
- Accessories: Clip, lanyard, spare plastic cap, and spare O-ring
-
Material: Polyurethane coated polyamide Weight: 50 g Dimensions: L= 13, W= 8 & D= 3 Fits in: Garmin GPS 60Map or Colorado Fits on: Equipment vest, belt or similar:A light weight and protective pouch that easily and quietly makes it possible to look at your GPS while walking-
In the folded position the padded front of the pouch protects the GPS from shocks
-
The open mode makes it possible to walk and look at you GPS without removing it from the pouch
-
An elastic band around the antenna keeps the pouch folded up during transport/protected mode. Pull the tab on the elastic band and the bag folds out to marching mode
-
On the back is our tuck in attachment system for quick and easy attachment on our equipment vest or similar
-
There are also Velcro straps for attaching the pouch on a carrier strap
-
Pouch weighs only 120 grams. It does not absorb water so it does not get any heavier in rain
-
-
A lightweight general purpose pouch with a wide opening top zipper. It opens on 3 sides for an easy access to the contents of the pouch. The zipper is semi stiffened to be easier to open and close. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can also be attached horizontally with the Velcro attachment bands. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits inside: Your night vision device, binocular, gloves or all the other small things you need to carry. Measurements: L= 19, W= 12 & D= 8. Weight: 105 g. Volume: 1,8L Note: The grey pouch does not have any MOLLE bands on the outside. -
Weight: 50 g Dimensions: L= 14, W= 11 & D= 4 Fits in: Handcuffs Fits on: Duty belt, Leg Platform, Equipment Vest and on the Trouser Belt Features:A light weight pouch for two handcuffs, that keeps them silent and secure, which is easy to use and attach on the equipment belt-
The pouch is securely attached to the belt or vest
-
Fits normal and large handcuffs
-
Press button closure with Velcro patch
-
The Velcro patch makes it possible to fast and easy close the pouch
-
The pouch is fully padded to reduce the rattling of the handcuffs and to make the pouch as strong as possible
-
The pouch will not absorb water, will not rot or get soft in the rain
-
Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. The pouch can be attached on the belt without removing what is already on the belt. Open the attachment bands on the back of the pouch. Place the pouch on the outer belt. Thread the attachment band under the horizontal band on the pouch and close the attachment bands.
-
-
A safe, easy, smooth and breathable leg mounting plate that is easy to use, attach and remove from the leg. It fits securely to your belt. A firm and ventilated place on your leg for one to four pouches. Mesh, perforated plastic sheet and foam keep the leg panel comfortable and ventilated. Elastic bands with Velcro closure keep the leg plate on your leg. The quick release with swivel function attaches the leg plate to your belt. The leg plate is soft and barely noticeable when wearing. The leg straps are elastic so that they are tight and comfortable. It is suitable for most pockets and holders in our system. It does not absorb water and does not gain weight when wet. One size fits all. Fits: Pistol holster and all types of pouches Beware: Belts and equipment belts -
Not in stock - on order
A safe, easy, smooth and breathable attachment plate for the leg that is easy to use, mount and remove from the leg It fits well on your belt. A firm and ventilated spot on your leg for one to four pouches. Mesh, perforated plastic film and foam keep the leg panel comfortable and ventilated. Elastic bands with Velcro closure attach the leg plate to your leg. Quick release buckle with swivel function attaches the leg plate to your belt. The leg attachment plate is soft and barely palpable while wearing. The leg straps are elastic to sit tight and comfortable. It is suitable for most pouches and holders in our system. It does not absorb water and does not gain heavier when wet. One size fits everyone. Fits: Pistol holster and all kinds of pouches Beware: Belts and equipment belts Weight: 300g -
Not in stock - on order
A pouch for large leg cuffs. Velcro tabs for fast closure of the flap. Press button for added security. Bottom drain hole. The pouch is padded to protect the cuffs. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. This system makes it possible to attach the pouch without removing other pouches from the belt. Weight: 70 g Dimensions: L= 16, W= 15 & D= 2,5 -
Not in stock - on order
The SnigleDesign is a must have cap for fans who like to cover their heads at the shooting range or want to protect themselves in the winter. Available in size Large and Medium. -
Not in stock - on order
The Swiss Eye Raptor black is a lovely seated pair of glasses for airsofting. It's one of the most popular eyewear to airsoft for a reason. It protects the eyes and is suitable for mounting a insert for glasses wearers. The glasses have polycarbanate lenses with an anti-fog and anti-scratch coating and give 100% protection against UVA, UVB and UVC up to 400 nanometers. The glasses come with an orange, tranparante and dark lens so you can adjust the glasses to the conditions. The glasses come in a microfibre bag. Specifications of the SwissEye Raptor black:- Adjustable legs
- Anti-fog / anti-scratch coating
- 100% UVA, UVB and UVC protection up to 400 nm (nanometer)
- Removable clip adapter for glazing (optional, not included)
- Orange, transparent and dark lenses
- Microfibre carrier bag
- EN 1836:2005 + A1:2007
- ANSI Z87.1 2003
- STANAG 2920
- EN 166:2001
