- Easy to use
- Good degree of blacking
- Fast results
-
FAST BLUES - COLD BLUES Fluna Gun Black is a quick tan (cold browning) for repairing tanning on rifle and pistol barrels. It is also suitable for blackening small metal parts such as screw heads etc. Attributes -
After we made the straps, it was decided to also offer a basic model fastener. These are solid quality copies of the German HK's weapon belt fasteners, just like their role models. These are e.g. to a very demanding government customer who is satisfied with them, so it will also be good for you. Functions- Easy-to-use spring-loaded hook buckle for carrying straps
- A good quality copy of a certainly great German model
- Fits 25 mm wide tape
- A belt hook can be attached to another of the same type
- 2-year warranty against defects in material and workmanship
- Made in Taiwan
- Weight: 24 grams
- Dimensions: 50 x 35 x 5 mm
- Material: steel
-
An effective, simple and reliable two-point sling, originally designed for a special military customer of ours. The LW (lightweight) Griffin Sling is simple and unobtrusive, made of 25mm/1" webbing without any padding, for submachine guns and light rifles. Check out the MW if you want a little width and padding, or the HW if you need a good thick filling. QUICK ADJUSTMENT SLIDER The heart of the Griffin Sling is our patented slider for quick adjustment. Quick, effortless adjustment allows for an easy transition between carry-shoot-carry etc. under any circumstances. We know the world is full of buckles for adjusting slings, and most of them are pretty good too. We chose to design our own customization hardware for these simple reasons: 1) It must be solid metal with no moving parts 2) It must have the right toothing and protrusions to grip; 3) It must be compatible with the grip lip for use with winter handwear; 4) And it should preferably be made in Finland If you hate the tab of the webbing grip, or just don't need it or whatever, you can cut it off. The serrated sides and the protruding attachment point of the webbing provide good grip. INSTALLATION Since this is a simple two-point sling, you don't have to play with multiple ends of the webbing, only two. The 25mm/1" strap fits most sling swivels and fasteners out there. We make these with long enough woven ends to reach around most people. 1. Open the back loop by passing the woven end through the steel tri-glide buckle. Loop the belt through the sling-swivel, buckle, stock, or whatever attachment point you use on the back of your firearm. Thread the fabric through the buckle again and make a U-turn to lock it in place. 2. Open the front quick adjustment loop and remove the steel tri-glide from the tire. Loop the webbing through your front sling-swivel or buckle, reattach the steel tri-glide and loop the strap around the quick adjustment slider and back through the steel tri-glide. 3. Try to play around with different adjustment lengths on the front and back. Once you've found the right setting, you can roll up the excess webbing ends and stick them in neat bundles. Or, if you dare, cut and burn them. ORIGIN The Griffin Slings are the commercial offspring of a series of slings that we have designed for a military customer according to their requirements. Our customer needed good two-point tires for all types of small arms, including sniper rifles and light machine guns. The slings should carry an unpleasant weight as comfortably as possible, be equipped with a forward pulling force to be able to be extended quickly, fit on different fasteners and must be effective and reliable in "suboptimal conditions" (it is -30 °C, you suffer from sleep deprivation and wearing thick winter gloves and the use of NVGs that ruin your view of everything within arm's length). Then we went on to design the lighter medium version for carbines, and the lightweight one for SMG:s and the like. Because these turned out pretty well, we decided to make them available to the public. So, here you go: the Griffin Slings — fairly fast, low-bullshit slings, named after that mythical half-bird-half-cat creature for some peculiar reason. Main features- Two-point sling for sniper rifles and machine guns
- Thick and sturdy foam cushion of 65 x 10 mm with closed cells
- All metal hardware (steel and aluminium)
- Quick loop adjustment slider for grip on webbing
- Pulling forward lengthens the sling and moves the support hand forward
- Front quick adjustment loop can be adjusted to the desired length
- A continuous piece of 25 mm/1" runs through the entire sling
- The ends of the sling form 25 mm/1" loops for universal attachment
- 5-year material and manufacturing warranty
- Gemaakt in Finland
- Weight: 140 g
- Length: 185 cm (detached to max. length)
- Webbing: 100% polyester
- Fabric: 500D Cordura (100% polyamide)
- Slider for quick adjustment: aluminum
- Buckles: steel
-
An effective, simple and reliable two-point sling, originally designed for a special military customer of ours. The LW (lightweight) Griffin Sling is simple and unobtrusive, made of 25mm/1" webbing without any padding, for submachine guns and light rifles. Check out the MW if you want a little width and padding, or the HW if you need a good thick filling. QUICK ADJUSTMENT SLIDER The heart of the Griffin Sling is our patented slider for quick adjustment. Quick, effortless adjustment allows for an easy transition between carry-shoot-carry etc. under any circumstances. We know the world is full of buckles for adjusting slings, and most of them are pretty good too. We chose to design our own customization hardware for these simple reasons: 1) It must be solid metal with no moving parts 2) It must have the right toothing and protrusions to grip; 3) It must be compatible with the grip lip for use with winter handwear; 4) And it should preferably be made in Finland If you hate the tab of the webbing grip, or just don't need it or whatever, you can cut it off. The serrated sides and the protruding attachment point of the webbing provide good grip. INSTALLATION Since this is a simple two-point sling, you don't have to play with multiple ends of the webbing, only two. The 25mm/1" strap fits most sling swivels and fasteners out there. We make these with long enough woven ends to reach around most people. 1. Open the back loop by passing the woven end through the steel tri-glide buckle. Loop the belt through the sling-swivel, buckle, stock, or whatever attachment point you use on the back of your firearm. Thread the fabric through the buckle again and make a U-turn to lock it in place. 2. Open the front quick adjustment loop and remove the steel tri-glide from the tire. Loop the webbing through your front sling-swivel or buckle, reattach the steel tri-glide and loop the strap around the quick adjustment slider and back through the steel tri-glide. 3. Try to play around with different adjustment lengths on the front and back. Once you've found the right setting, you can roll up the excess webbing ends and stick them in neat bundles. Or, if you dare, cut and burn them. ORIGIN The Griffin Slings are the commercial offspring of a series of slings that we have designed for a military customer according to their requirements. Our customer needed good two-point tires for all types of small arms, including sniper rifles and light machine guns. The slings should carry an unpleasant weight as comfortably as possible, be equipped with a forward pulling force to be able to be extended quickly, fit on different fasteners and must be effective and reliable in "suboptimal conditions" (it is -30 °C, you suffer from sleep deprivation and wearing thick winter gloves and the use of NVGs that ruin your view of everything within arm's length). Then we went on to design the lighter medium version for carbines, and the lightweight one for SMG:s and the like. Because these turned out pretty well, we decided to make them available to the public. So, here you go: the Griffin Slings — fairly fast, low-bullshit slings, named after that mythical half-bird-half-cat creature for some peculiar reason. Main features- Two-point sling for assault rifles and similar small arms
- Thin 35 x 4 mm foam filling with closed cells
- All metal hardware (steel and aluminium)
- Quick loop adjustment slider for grip on webbing
- Pulling forward lengthens the sling and moves the support hand forward
- Front quick adjustment loop can be adjusted to the desired length
- A continuous piece of 25 mm/1" runs through the entire sling
- The ends of the sling form 25 mm/1" loops for universal attachment
- 5-year material and manufacturing warranty
- Gemaakt in Finland
- Weight: 115 grams
- Length: 185 cm (detached to max. length)
- Webbing: 100% polyester
- Fabric: 500D Cordura (100% polyamide)
- Slider for quick adjustment: aluminum
- Buckles: steel
-
An effective, simple and reliable two-point sling, originally designed for a special military customer of ours. The LW (lightweight) Griffin Sling is simple and unobtrusive, made of 25mm/1" webbing without any padding, for submachine guns and light rifles. Check out the MW if you want a little width and padding, or the HW if you need a good thick filling. QUICK ADJUSTMENT SLIDER The heart of the Griffin Sling is our patented slider for quick adjustment. Quick, effortless adjustment allows for an easy transition between carry-shoot-carry etc. under any circumstances. We know the world is full of buckles for adjusting slings, and most of them are pretty good too. We chose to design our own customization hardware for these simple reasons: 1) It must be solid metal with no moving parts 2) It must have the right toothing and protrusions to grip; 3) It must be compatible with the grip lip for use with winter handwear; 4) And it should preferably be made in Finland If you hate the tab of the webbing grip, or just don't need it or whatever, you can cut it off. The serrated sides and the protruding attachment point of the webbing provide good grip. INSTALLATION Since this is a simple two-point sling, you don't have to play with multiple ends of the webbing, only two. The 25mm/1" strap fits most sling swivels and fasteners out there. We make these with long enough woven ends to reach around most people. 1. Open the back loop by passing the woven end through the steel tri-glide buckle. Loop the belt through the sling-swivel, buckle, stock, or whatever attachment point you use on the back of your firearm. Thread the fabric through the buckle again and make a U-turn to lock it in place. 2. Open the front quick adjustment loop and remove the steel tri-glide from the tire. Loop the webbing through your front sling-swivel or buckle, reattach the steel tri-glide and loop the strap around the quick adjustment slider and back through the steel tri-glide. 3. Try to play around with different adjustment lengths on the front and back. Once you've found the right setting, you can roll up the excess webbing ends and stick them in neat bundles. Or, if you dare, cut and burn them. ORIGIN The Griffin Slings are the commercial offspring of a series of slings that we have designed for a military customer according to their requirements. Our customer needed good two-point tires for all types of small arms, including sniper rifles and light machine guns. The slings should carry an unpleasant weight as comfortably as possible, be equipped with a forward pulling force to be able to be extended quickly, fit on different fasteners and must be effective and reliable in "suboptimal conditions" (it is -30 °C, you suffer from sleep deprivation and wearing thick winter gloves and the use of NVGs that ruin your view of everything within arm's length). Then we went on to design the lighter medium version for carbines, and the lightweight one for SMG:s and the like. Because these turned out pretty well, we decided to make them available to the public. So, here you go: the Griffin Slings — fairly fast, low-bullshit slings, named after that mythical half-bird-half-cat creature for some peculiar reason. Main features- Two-point sling for lightweight small arms
- Full webbing construction, low profile and weight
- All metal hardware (steel and aluminium)
- Quick loop adjustment slider for grip on webbing
- Pulling forward lengthens the sling and moves the support hand forward
- Front quick adjustment loop can be adjusted to the desired length
- A continuous piece of 25 mm/1" runs through the entire sling
- The ends of the sling form 25 mm/1" loops for universal attachment
- 5-year material and manufacturing warranty
- Gemaakt in Finland
- Weight: 80 g
- Length: 185 cm (detached to max. length)
- Webbing: 100% polyester
- Slider for quick adjustment: aluminum
- Buckles: steel
-
Not in stock - on order
- Metal fittings - Light but fairly sturdy duralumin fittings can withstand extreme workloads.
- No injuries - Soft coating + integral buckle and platform + built-in patented telescopic mechanism prevents pinching of soft tissues and their atrophy, if the tourniquet is applied.
- Triangle for attachment - Our special patented form of triangle makes it possible to attach the stick and tail of the rope quickly and safely.
- Rope for marking - Due to special gray coating, it is possible to make markings with any sharp object (ball pattern, nail, etc.).
- Extra strong adhesive technology - Special patented technology ensures extra strong adhesive strength of the tape and its safe and effective operation in any condition, wet, snow-covered, dirty, in frost and heat.
-
Not in stock - on order
Upholstered 5.11 Tactical insert and service bag with sturdy handles and a fold-out headrest seat attachment for the service car. material 100% Polyester Details:- 1 large main compartment with Velcro partitions, Molle belt system in the lid, 2 mesh zippered pockets and 1 inner wall for Velcro pockets (length 510mm, width 120mm, height 310mm)
- Zippered pocket with organizer and pen pockets, Molle belt system in the lid
- 2x lateral Molle belt system
- Pocket and Velcro for name badges
- padded handle
- adjustable shoulder strap
- Dimensions: approx. W / 48 x H / 32 x D / 22 cm.
-
Not in stock - on order
Thermos® Light & Compact thermos flask made of double-walled, impact-resistant and shatter-resistant stainless steel with vacuum insulation technology. The thermos has a demountable automatic cap with an insulated drinking cup. Thanks to the Thermos® vacuum insulation technology, the thermos keeps the contents warm for up to 12 hours or cold for 24 hours. material Bottle: stainless steel cap, cup insert: plastic free of BPA and harmful substances Details:- Top rack dishwasher safe.
- Thermos insulation technology, double-walled stainless steel.
- Impact and break resistant.
- Detachable automatic closure with insulated drinking cup.
- 100% tight.
- Without inner coating.
- Certified according to DIN EN-12546.
- Capacity: 0.5 litres.
- Dimensions: approx. 6.8 x 6.8 x 24.5 cm.
- Weight: approx. 350 g. Thermos L.L.C., founded in 1904, is the world's leading manufacturer of food and beverage cups.
-
Not in stock - on order
For all hunters, clay pigeon and shotgun shooters - the Jack Pyke thermos flask pattern in the form of a shotgun cartridge. The double-walled thermos is made of shatterproof and stainless steel and ensures a constant temperature of the liquids. The lid also serves as a drinking cup. material Stainless steel, double-walled cup + closure: plastic Details:- Double-walled stainless steel bottle.
- Quick-stop closure and cup.
- Content: 500ml.
- Dimensions: approx. 25.4 x 6.7 cm.
- Weight: approx. 338 g.
-
Surprise your loved ones with an A Full Metal Jacket Shop gift voucher. You can choose from different amounts. After we have received your order, we will send you a receipt within 24 hours with your chosen amount and code to use. You can choose between 3 different models, tactical, hunting and outdoor. The vouchers have a validity of 1 year from purchase. Would you like a personalized message or another amount? Send us an email at info@afullmetaljacket.com and we will help you further. -
30 years of experience in building large military backpacks. The main upgrade is the new "Herma" buckle, a buckle that is both brand and female in one buckle. That makes it possible to attach it wherever you want. No more searching for the right buckle to connect with. The depth of the backpack is small, but the width and lengths are long to carry what you need, but to be as close to your body as possible makes it easier to carry it. Shaped to sit nice and tight along the back. Stiff head hole and cut out in the lid so you can lean your head back when carrying the backpack. Shoulder pads are made of foam plastic and 1mm hard plastic for comfort and an even balance of weight. They have a chest strap and handset/microphone attachment. The main compartment has a large U-shaped opening with zipper to access the upper part of the backpack. The opening is covered with PALS on the outside. The sleeping bag compartment in the bottom of the backpack is also accessible through a U-shaped opening in the bottom of the backpack. This compartment is made variable in size so that a large sleeping bag fits in it. Two removable 11-litre side pockets with zippered opening on both sides that are accessible when you're on the backpack or in the tent. The side pockets can be connected as a backpack or worn separately. Top cover that can also be worn as a hip bag or small backpack. The top cover is designed to carry a spare sweater, mines, a drinking system, your administration book or something similar. 3L Zippered lid pocket for flashlights, spare batteries, insect repellent etc. Holder for a helmet, your poncho or something similar on top of the lid. Hip belt with plastic layer and sturdy foam for comfort and stability. It has steel O-rings so that a sled can be attached to it. The hip belt is attached in the middle, allowing you to move freely. Sled attachment points on the hip belt. Velcro patch for marking the owner. Roll up the ends of all the tires. The frame has been enhanced with a stiffer construction to make carrying the backpack even more comfortable. Size 100L Model: 29-01161C09-100 Weight: 5000 g Dimensions: 85 × 36 × 20 cm Color: Grey -
The updated version of our 50L Mission backpack. The main upgrade is the new "Herma" buckle, a buckle that is both brand and female in one buckle. That makes it possible to attach it wherever you want. No more trying to find the right buckle to connect with. The interior is colored light gray to make it easier to find what you're looking for without becoming a beacon, visible to the enemy. A classic backpack with a lid. Designed to match the natural shape of your spine. The lid can be removed and used as a hip bag. It has an outer and inner zippered pocket and an elastic shock cord at the top. Roll top opening/closing in the main compartment keeps snow and dirt out. The bag has a frame with a plastic plate and aluminum bars on the back to make it sturdy, but customizable. Shoulder pads are made of foam plastic for comfort and even weight balance. They have a chest strap. Inner pocket and hanger for a drinking system. MOLLE strap on the sides of the backpack, to which more pockets can be attached. Two side pockets (26-02140A0-000) can be attached to the backpack with zippers (not included). On the back of the backpack, we added a holder that can be hidden inside the backpack or exposed to a helmet or other large piece of equipment. Padded hip belt with MOLLE strap to attach pockets. The belt can also be used as a lightweight combat belt. The hip belt is adjustable in height. Roll up the ends of all the straps to keep them tight. The Spoon sleeve, Double spoon garage and Curved Spoon are not included in the backpack. The pair of side pockets is not included in the backpack. Content: 50L. Article number: 29-00160B09-000 Weight: 2200 g Dimensions: 70 × 35 × 20 cm Color: Grey All fabrics, buckles and straps are IRR compatible! -
Hard work in cold weather? With the Mechanix ColdWork Peak gloves with PrimaLoft Gold 100 g insulation and waterproof membrane you are well equipped. The valve consists of a water-repellent SoftShell outer material and a sturdy, 5 mm padded knuckle protection as shock protection during work. The palm has a waterproof Armortex® handle and touchscreen technology on the index finger. material Palm: leatherette 1 (80% polyester, 20% polyurethane), synthetic rubber fabric (87% polyvinyl chloride, 13% polyethylene bitrephthalate); Back of hand: Thumb: Synthetic, rubber fabric (87% polyvinyl chloride, 13% polyethylene bitrephthalate); Fingers: leatherette 2 (100% polyester), leatherette 3 (100% nylon); Leatherette 4 (96% polyester, 4% nylon), leatherette 1 (80% polyester, 20% polyurethane); Lining material: Tricot (100% polyester); Inner lining: PrimaLoft 100g (100% polyester) Reviews Details:- Extended cuff with adjustable ladder buckle and drawstring.
- Water-repellent SoftShell outer material.
- 5 mm padded ankle protection.
- PrimaLoft® 100g gold performance insulation.
- Fixed Armortex® reinforcement for the thumb saddle and fingertips.
- A waterproof membrane keeps hands dry in rain, sleet or snow.
- A sturdy Armortex® layer on the palm provides a waterproof and secure grip.
- Thanks to a touchscreen-enabled palm technology, you'll stay connected even in winter.
- The detachable spring clip makes it easy to store the gloves.
-
The blanket has a fleece construction with a high loft in combination with a waterproof and breathable outer fabric. The blanket has two functions: a traditional blanket and an insulated poncho worn over the shoulders. The blanket fits in its own compact bag measuring 19x13x24 cm. Laid flat, the blanket is 145 cm long, 80 cm wide at the foot and 110 cm at the top. The blanket is ideal for 24-48 hour missions and effectively repels the cold during rest or guard duty. The blanket can be easily attached around your shoulders with five press studs.- The blanket is made of fleece with a waterproof/breathable outer fabric.
- It can be used as a blanket or as a poncho over the shoulders.
- Perfect for a 24-48 hour mission.
- Keeps the cold away when you're asleep or on watch.
- With a push button, you can attach it over your shoulders.
- Packed in its own small bag, 17x12x23 cm.
-
Somewhat transparent, totally non-waterproof and just neat in many ways, these packing bags are made of a strong mesh fabric. Designed to store, transport and organize all kinds of equipment and items. Because they are made of a mesh fabric, they work very differently from most packaging bags and offer very different functions. There are things in this world that you don't want to pack, transport or store tightly in water or air, mesh does just that. As a bonus mesh, you can see through it, which helps identify the contents of each bag if you have a bunch of these with different gears. Use cases: - By putting wet equipment in it, the mesh allows the contents to dry out. - Clear color coding of your spare clothing in your bag or backpack. - Storage of equipment that you want to "breathe". Attributes- Clear mesh construction
- Rolltop closure with SR buckle
- Available in a range of sizes from 5 to 40 litres
- 5-year material and manufacturing warranty
- Made in Finland &Estonia
- 5L: weight 100 g, flat dimensions 22 x 41 cm (W x L)
- 10L: weight 140 g, flat dimensions 30 x 52 cm (W x L)
- 20L: weight 195 g, flat dimensions 37 x 63 cm (W x L)
- 40L: weight 320 g, flat dimensions 51 x 87 cm (W x L)
- Materials: Mesh: 100% polyester Webbing: 100% polyester
-
Condor quilted rifle case for 1 long and 1 short weapon with the following details:- 1 main compartment for 1 long guns with 4 attachment points,
- Handle, detachable backpack straps with chest strap, reinforced padding on the side surfaces,
- 1 padded outer pocket (28x70x6.5 cm) with two inner pockets for pistols, optics or other accessories, detachable padded center bar,
- 2 modular charger bags, 1 modular accessory bag. Dimensions: approx. (H/W) 30 x (L) 71x (D) 7,5 cm.Available in the colours black, coyote Material: 100% nylon
