-
Not in stock - on orderAn explosion symbol to mark your competence with explosives EOD etc. on the bag or pouch Velcro on the back Attached to the outside of the bag with Velcro patches 60 mm
-
Not in stock - on orderA string with emergency release buckle in the back to carry a identity card or similar. Our wallet can also be carried in it. Dimensions: L=80 cm.
-
The adjuster makes it easy to adjust the size of the equipment strap when changing from heavy winter clothing to light summer clothing Attach it to the right side of the belt and then thread it through the buckle The buckle is still on the left side and you use the belt as you are used to The safety belt is used as usual on top of the adjuster Dimensions: 22 x 5 Beware: 50 mm equipment straps
-
Not in stock - on orderDurable plastic cup folds open from the folded position to form a 2 dl drinking cup. Guaranteed leak-proof, even with boiling water. The best cup to bring into the field. Always wear it in one of your trouser pockets, so you can easily access it if you want to drink from a stream. Snigel logo printed on the outside. Weight: 25 grams Dimensions: 9 x 7 x 3 cm Category Miscellaneous products Color: Olive
-
Not in stock - on orderA gray and black patch with the text IEDD.
-
Not in stock - on orderA band with a good and secure hook to keep your keys at hand. One hand open hook, to make it easy to get the keys. The hook is special, it is easy to open if you have tried it, but if you are trying to steal the keys are are not used to thehook, it is difficult to open. Mesasurements:L= 12, W= 2,5 & D= 2 Weight: 25 g
-
Not in stock - on orderQuickly connect/ disconnect the bladder tube Convenience with push button Integrated locking mechanism Fully compatible with Tactical Gear QMT
-
Kenmerken: The I-Bar is mounted where you want to attach your backpack, bag or Specialist backpack small. It can be mounted on any backpack, vest or sternum.
How to assemble:
- Thread the strap under the strap on the platform where you want it to be.
- The strap should be laced in the direction the buckle should be pointing when attached.
- Pull the strap through the front hole of the buckle
- Pull the strap through the rear hole of the buckle
- Adjust the length of the belt
- Fasten the Velcro
- Pull the buckle to make sure it's secure
- Attach the other buckles you need
- Attach the bag/backpack etc and make sure the buckles are placed in the correct positions
-
Not in stock - on orderMechanism for attaching paper in our sleeves. Have velcro at the back. FBM-10B= Is an international 2-hole mechanism. 85 mm between the rings and the rings have a diameter of 40 mm. Color: Olive
-
The long curved spoon connects the spoon garage on the belt to the backpack. This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. The garage is attached to the combat belt. The outer compartment connects to the backpack. The outer compartment of the double spoon garage 2.0 connects to the backpack with the curved long spoon, which is placed in the adjustable spoon cover. The curved spoon moves with your hips to allow the legs to move freely through the backpack, minimizing energy consumption in your body.
-
Weight: 15 g Dimensions: L= 9 & W= 2,5 Fits in: Gloves Fits on: The equipment belt Features:A simple glove keeper to carry gloves on the belt
-
Fits most gloves
-
3 press button adjustment for different sized gloves
-
Velcro attachment system makes it possible to attach the keeper on any equipment vest or belt
-
Light weight
-
-
Not in stock - on orderA tighter General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. Velcro openable bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy fold back system on the back of the pouch. This makes it possible to attach the pouch without removing other pouches from the belt. Weight: 40 g Dimensions: H = 13 cm, W = 4 cm, D = 3 cm Fits: Pistol magazine, short flash lights, multi tools etc. Fits on: Equipment vest, belt, leg plate or leg attachment
-
Not in stock - on orderSPEED MAGAZINE POUCH 2.0 The size is easy to change with the elastic cord. Low profile to make working in an open hatch or in a car easier. The elastic cord closure in the top is quick and easy to open Low cut out to remove the warehouse faster. 25 mm MOLLE tires on the outside so you can attach other bags to the outside. Two or more warehouse bags can be attached outside each other. Eyelet at the bottom to leave out water. Tuck-in mounting system makes it possible to attach the pouch to any equipment vest or strap. The mounting system is easy to use on both the standard 25mm MOLLE/PALS system. Storage capacity: 1 x 7.62 or 1 x 5.56 magazine or radio, pistol etc.
-
Not in stock - on orderFor 2x 9 mm magazines or flashlights or similar objects. The holder has an open able bottom so objects with different lengths can be carried. The holder has hook Velcro on the back that attaches to the loop Velcro in the magazine pouches of the Plate carrier, Strap on DF -12/13 or the dual or triple- magazine pouch. It can also be attached on our other products with a Velcro loop panel. Dimensions: H=10, W=7 & D=1 cm. Weight: 18 g
-
A light and very comfortable trouser belt. Suitable when you do not carry heavy weights in your pockets. It is elastic and adapts to your body, while still not being flimsy. Made of the same elastic band that we use in the Army's single-point weapon holder for the AK5. The belt is cut to a fitting length in the end that is fastened in the buckle, and the edge is burnt to seal it and prevent fraying. The buckle is easily fitted and removed. A tip is to remove only the buckle and keep the strap in the pants, when passing through security at airports.
- Material: Polypropylene tape
- Weight: 90 g
- Dimensions: The belt is 128 cm long.
- Width of the band 40 mm.
-
A light General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has Velcro open able bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Weight: 40 g Dimensions: H = 13 cm, W = 5 cm, D = 4 cm Volume: 0,2L Fits: Pepper spray short, short wide flash lights, distraction grenades, 40 mm grenades, GPS, mobile tel Fits on: Equipment vest, belt, leg plate or leg attachment
-
A tighter General purpose pouch to store small items in. The pouch is designed to be lightweight and take as little space as possible, while remaining strong enough for military use. Elastic band, on the pouch to keep the contents secured, even when the flap is open. Pull tab on the flap to make it easy to open, even with gloves on. Velcro closed flap with pull tab, for easy opening The flap can be pushed into the pouch and secured with Velcro for easier access to the thing you carry in the pouch. Bottom drain hole. Fold back attachment system makes it possible to attach the pouch on any equipment vest or belt. It has Velcro open able bands on the back so that it can be carried horizontally on the trousers belt. To carry it vertically you use the silent and easy to use fold back system on the back of the pouch. This system makes it possible to attach the pouch without removing other pouches from the belt. Fits inside: Long and narrow gear like flashlights and other similar items. Dimensions: H = 15 cm, W = 4 cm, D = 3 cm Weight: 50 g.
-
Weight: 40 g Dimensions: L= 10, W= 9 & D=2-4 Fits in: Gloves and disposable gloves Fits on: The equipment belt and all other plattforms Features:A versitile glove holder for 2 pairs of surgical gloves or one pair of normal gloves
-
2 inside compartments for disposable gloves
-
Fits most gloves vertically or horisontally
-
Verticall leaves more space for other things on the belt
-
There i exposed rubber on the inside of the holder to prevent the gloves from slipping out of the holder
-
-
Velcro attachment system makes it possible to attach the pouch on any equipment vest or belt
-
It is attached on the belt with the velcro bands on the back of the pouch
-
You can attach the holder without removing the pouches from the belt
-
-
-
Not in stock - on orderA padded pouch with drawstring closure. Thick fleece on the inside for protection. Can be used to store sensitive equipment such as night vision goggles. Fits in our Small Oyster pouch.
- Weight: 38 g
- Dimensions: 23 x 17 x 2 cm
-
The tie-down strap that attaches to our 90-130 liter backpacks and connects the long spoon to the double spoon garage on the combat belt. This is part of the Spoon system, the system that finally allows you to use your combat belt to carry your backpack. No more double straps. The outer compartment of the double spoon garage 2.0 connects to the backpack with the curved long spoon, which is placed in the adjustable spoon sleeve. *Atmospheric photos and additional material for illustrative purposes only. Not included in the package.
-
Not in stock - on orderWeight: 40 g Dimensions: L= 11, W= 9 & D= 2 Fits in: Handcuffs - only classic model with chain ! Fits on: Equipment vest, belt, leg plate or leg attachment Features:A light weight pouch for handcuffs which is are flexible and can be used on the duty belt or covertly. The pouch is designed to be small, lightweight, flexible and to comfortably hold your handcuffs
-
Open top for lowest weight
-
The pouch can easily be opened with one hand
-
It sits comfortably mounted on the belt and can be closed with the press button
-
The weight is only 15 grams. The material does not retain water so is no heavier if wet
-
Can be attached without removing items from the duty belt
-
Use the velcro strap on the back to attach the holder to the duty belt. You can open and attach it to the outer belt without removing other pouches
- Open the straps and thread them around the belt and close it with the velcro straps.
-
-
Not in stock - on order12 mm flexible, ergonomic polyethylene knee pads. The pair of knee pads sits in the pockets on the inside of the pants, with the ribbed side facing inwards, to protect the knees. The text "This side towards the enemy" is placed on the outside of the pants. Holes have been punched into the knee pads to increase ventilation, making them cooler in hot weather. The lower part of the pads can be cut off to adjust the height so that it ends up on the knee when you kneel. The knee pad can be used in the Snigel combat pants Article number: 00-201669A01-000 Weight: 40 grams Dimensions: 25 x 18 x 2 cm
-
Not in stock - on orderThe SnigleDesign is a must have cap for fans who like to cover their heads at the shooting range or want to protect themselves in the winter. Available in size Large and Medium.